Search

Purpose: Postactivation performance enhancement (PAPE), which refers to the phenomena associated with the attainment of enhanced performance in sport-specific tasks after a conditioning activity, is an important objective of warming-up practices in many sports. This is even more relevant for sprinters, as potential increases in sprinting speed will directly influence their competitive results. This systematic review with meta-analysis evaluated the effects of different PAPE protocols (ie, using plyometrics, strength-power exercises, and resisted/assisted sprints) on the sprinting performance (ie, sprint time or sprint speed) of competitive sprinters. Methods: Initially, 1205 records published until last December 18 were identified, using the following databases: PubMed/MEDLINE, Scopus, and Clarivate Web of Science. After removing duplicates and screening titles and abstracts, 14 high-quality studies met the inclusion criteria for the meta-analysis. Results: Overall, there were no significant changes in sprint performance after implementing various types of conditioning activities (standardized mean difference [SMD] = 0.16 [95% CI, −0.02 to 0.33]; Z = 1.78; P =.08; I2 = 0%). In addition, when comparing prechanges and postchanges between experimental, control, and other conditions, no significant differences were found in sprint speed or time across all studies (SMD = 0.09 [95% CI, −0.10 to 0.28]; Z = 0.92; P =.36; I = 0%). Conclusions: Results revealed that different types of conditioning activities may not be capable of acutely enhancing the sprint speed of competitive sprinters. This aligns with previous observations indicating that sprinting is a highly stable physical capacity, a phenomenon that is even more consistent among elite sprinters. Coaches and sport scientists should collaborate to develop more efficient PAPE protocols for these highly specialized athletes, with special attention to study design and individualization, while considering their effects on acceleration versus top speed. [ABSTRACT FROM AUTHOR]

Despite previous support for plyometric training, optimal dosing strategies remain unclear. Purpose: To investigate vertical and horizontal jump kinetic performance following a low-volume plyometric stimulus with progressively increased session jump volume. Methods: Sixteen academy rugby players (20.0 [2.0] y; 103.0 [17.6] kg; 184.3 [5.5] cm) volunteered for this study. Vertical and horizontal jump sessions were conducted 1 week apart and consisted of a 40-jump low-volume plyometric stimulus using 4 exercises, after which volume was progressively increased to 200 jumps, using countermovement jump (CMJ) for vertical sessions and horizontal broad jump (HBJ) for horizontal sessions. Jump performance was assessed via force-plate analysis at baseline (PRE-0), following the low-volume plyometric stimulus (P-40), and every subsequent 10 jumps until the end of the session (P-50, P-60, P-70,... P-200). Results: The low-volume stimulus was effective in potentiating HBJ (2% to 5%) but not CMJ (0% to −7%) performance (P <.001). The HBJ performance enhancements were maintained throughout the entire high-volume session, while CMJ realized small but significant decrements (−5% to −7%) in jump height P-50 to P-80 before recovering to presession values. Moreover, increases in eccentric impulse (5% to 24%; P <.001) in both sessions were associated with decreased or maintained concentric impulse, indicating a breakdown in performance-augmenting mechanisms and less effective power transfer concentrically after moderate volumes. Conclusion: Practitioners should consider kinetic differences between HBJ and CMJ with increasing volume to better inform and understand session dosing strategies. [ABSTRACT FROM AUTHOR]

The aim of this study was to examine responses at 3 and 27 hours after low-load jump squat (LL) and maximal isometric half-squat (ISO) priming stimuli. Fifteen resistance-trained males performed LL (4 3 3 at 20% 1 repetition maximum [1RM]), ISO (4 3 3 seconds), and control (CON) activities (standardized warm-up) in a randomized and counterbalanced order. Countermovement jump (CMJ) and isometric midthigh pull tests were conducted to assess performance changes after priming and CON activities. No clear changes in CMJ measures were found after priming activities compared with CON. However, small effect size improvements were found after priming stimuli completed on the same day. A 2.9% decrease in concentric phase duration (CI 5 0.3-5.9, p 5 0.333, Cliff's delta520.156) and a 9.1% increase in RSImod (CI 50.2-12.3, p50.151, Cliff's delta520.218) occurred at 3 hours after LL compared with CON. Braking phase duration (CI 5 0.8-10.6, p 5 0.333, Cliff's delta520.213) was 2.9% shorter at 3 hours after ISO compared with CON. No clear changes in isometric peak force occurred after priming activities compared with CON. Additionally, questionnaires were completed to assess perceptual state and perceived effectiveness of the priming stimulus to influence performance. An increase in the "effect of activity" was perceived at 3 hours after LL and ISO (p 5 0.013-0.044, Cliff's delta 5 0.578-0.6) and at 27 hours after ISO (p 5 0.99, Cliff's delta 5 0.173) compared with CON. An increase in "muscular heaviness" was also reported at 3 hours after ISO compared with CON (p 5 0.199, Cliff's delta 5 0.320). The collective findings suggest limited benefits over the day after LL and ISO priming stimuli. However, as there was substantial variation in individual responses, the relative nature of priming responses should be considered when prescribing similar strategies in practical environments. [ABSTRACT FROM AUTHOR]

Purpose: The optimal power load is defined as the load that maximizes power output in a given exercise. This load can be determined through the use of various instruments, under different testing protocols. Specifically, the "optimum power load" (OPL) is derived from the load–velocity relationship, using only bar force and bar velocity in the power computation. The OPL is easily assessed using a simple incremental testing protocol, based on relative percentages of body mass. To date, several studies have examined the associations between the OPL and different sport-specific measures, as well as its acute and chronic effects on athletic performance. The aim of this brief review is to present and summarize the current evidence regarding the OPL, highlighting the main lines of research on this topic and discussing the potential applications of this novel approach for testing and training. Conclusions: The validity and simplicity of OPL-based schemes provide strong support for their use as an alternative to more traditional strength–power training strategies. The OPL method can be effectively used by coaches and sport scientists in different sports and populations, with different purposes and configurations. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to map responses over 32 hours following high-load (HL) and moderate-load (ML) half-squat priming. Methods: Fifteen participants completed control, HL (87% 1RM), and ML (65% 1RM) activities in randomized, counterbalanced order. Countermovement jump (CMJ), squat jump (SJ), saliva testosterone, saliva cortisol, and perceptual measures were assessed before and 5 minutes, 8 hours, 24 hours, and 32 hours after each activity. Results are presented as percentage change from baseline and 95% confidence interval (CI). Cliff delta was used to determine threshold for group changes. Results: SJ height increased by 4.5% (CI = 2.2–6.8, Cliff delta = 0.20) 8 hours following HL. CMJ and SJ improved by 6.1% (CI = 2.1–7.8, Cliff delta = 0.27) and 6.5% (CI = 1.2–11.8, Cliff delta = 0.30), respectively, 32 hours after ML. No clear diurnal changes in CMJ or SJ occurred 8 hours following control; however, increases of 3.9% (CI = 2.9–9.2, Cliff delta = 0.26) and 4.5% (CI = 0.9–8.1, Cliff delta = 0.24), respectively, were observed after 32 hours. Although diurnal changes in saliva hormone concentration occurred (Cliff delta = 0.37–0.92), the influence of priming was unclear. Perceived "physical feeling" was greater 8 hours following HL (Cliff delta = 0.36) and 32 hours after ML and control (Cliff delta = 0.17–0.34). Conclusions: HL priming in the morning may result in small improvements in jump output and psychophysiological state in the afternoon. Similar improvements were observed in the afternoon the day after ML priming. [ABSTRACT FROM AUTHOR]

Purpose: To test the relationships between maximum and relative strength (MS and RS), absolute and relative peak force (PF and RPF), and strength deficit (SDef), with sprint and jump performance, and to compare these mechanical variables between elite sprinters and professional rugby union players. Methods: Thirty-five male rugby union players and 30 male sprinters performed vertical jumps, 30-m sprint, and half-squat 1-repetition maximum (1RM), where these force-related parameters were collected. Pearson correlation coefficients were used to test the relationships between the variables. An independent t test and magnitude-based inferences compared the mechanical variables between sprinters and rugby players. Results: Almost certain significant differences were observed for jump and sprint performance between groups (P <.0001). The rugby union players demonstrated a likely significant higher MS (P =.03) but a very likely lower RS (P =.007) than the sprinters. No significant differences were observed for PF between them. The sprinters exhibited an almost certain significant higher RPF than the rugby players (P <.0001). Furthermore, the rugby players demonstrated almost certain to likely significant higher SDef from 40% to 70% 1RM (P <.05) compared with the sprinters. Overall, all strength-derived parameters were significantly related to functional performance. Conclusions: Elite sprinters present higher levels of RS and RPF, lower levels of SDef, and better sprint and jump performance than professional rugby players. Relative strength-derived values (RS and RPF) and SDef are significantly associated with speed–power measures and may be used as effective and practical indicators of athletic performance. [ABSTRACT FROM AUTHOR]

Purpose: Dozens of variables can be derived from the countermovement jump (CMJ). However, this does not guarantee an increase in useful information because many of the variables are highly correlated. Furthermore, practitioners should seek to find the simplest solution to performance testing and reporting challenges. The purpose of this investigation was to show how to apply dimensionality reduction to CMJ data with a view to offer practitioners solutions to aid applications in high-performance settings. Methods: The data were collected from 3 cohorts using 3 different devices. Dimensionality reduction was undertaken on the extracted variables by way of principal component analysis and maximum likelihood factor analysis. Results: Over 90% of the variance in each CMJ data set could be explained in 3 or 4 principal components. Similarly, 2 to 3 factors could successfully explain the CMJ. Conclusions: The application of dimensional reduction through principal component analysis and factor analysis allowed for the identification of key variables that strongly contributed to distinct aspects of jump performance. Practitioners and scientists can consider the information derived from these procedures in several ways to streamline the transfer of CMJ test information. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the association between the optimum power load in the bench press (BP), shoulder press (SP), and prone bench pull (PBP) exercises and acceleration (ACC) and speed performances in 11 National Team wheelchair basketball (WB) players with similar levels of disability. All athletes were previously familiarized with the testing procedures that were performed on the same day during the competitive period of the season. First, athletes performed a wheelchair 20-m sprint assessment and, subsequently, a maximum power load test to determine the mean propulsive power (MPP) in the BP, SP, and PBP. A Pearson product–moment correlation was used to examine the relationships between sprint velocity (VEL), ACC, and the MPP in the three exercises. The significance level was set as p <.05. Large to very large significant associations were observed between VEL and ACC and the MPP in the BP, SP, and PBP exercises (r varying from.60 to.77; p <.05). The results reveal that WB players who produce more power in these three exercises are also able to accelerate faster and achieve higher speeds over short distances. Given the key importance of high and successive ACCs during wheelchair game-related maneuvers, it is recommended that coaches frequently assess the optimum power load in BP, SP, and PBP in WB players, even during their regular training sessions. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the peak force (PF), peak power (PP), and peak velocity (PV) outputs produced during half-squat (HS) and jump squat (JS) exercises executed at 20, 40, 60, and 80% of 1 repetition maximum (1RM) in the HS (HS 1RM) and to compute and compare the strength deficit (SDef) achieved in these exercises across these loads. Twenty-four national rugby union players (age: 25.7 ± 3.6 years) performed HS 1RM and a progressive loading test in the HS and JS exercises. The PF, PP, and PV values were obtained in all loads for both exercises, and the SDef was calculated as the percentage difference between the PF at distinct relative intensities and the PF at HS 1RM. The differences in HS and JS variables were determined using an analysis of variance with repeated measures. Higher PF, PP, and PV outputs were generated in the JS in comparison with the HS exercise (p < 0.05); moreover, the SDef magnitudes were significantly lower in the JS (p < 0.01), for all loading conditions. Importantly, the differences in SDef, and as a consequence, PF, PP, and PV decreased progressively with increasing load. Overall, the loaded JS exhibited increased levels of PF, PP, and PV and reduced levels of SDef when compared to the traditional HS performed across a range of loads. The JS is indicated to reduce the SDef and improve the athletes’ ability to apply force at higher velocities. Nevertheless, with heavier loads (i.e.,≥80% HS 1RM), its potential advantages and effectiveness may be seriously compromised. [ABSTRACT FROM AUTHOR]

Previous research established that male powerlifters have less range of motion (ROM) in several movements about the shoulder and hip compared with sedentary male subjects. It is unclear if these differences in ROM are related to strength, training type, and years of training experience or if individuals with less ROM have a better propensity to gain strength. The purpose of this study was to compare strength and ROM in male powerlifters and recreationally strength-trained male subjects and to determine if ROM would be an effective predictor of strength in these groups. Twelve powerlifters and 12 recreationally strength-trained control subjects completed 1 repetition maximum (1RM) squat and bench press testing. In a subsequent session, active ROM was measured, and velocity data were collected during submaximal squat repetitions. There was no significant difference (p > 0.05) between the groups for age, height, body mass, training experience, and training frequency. Powerlifters had significantly greater (p ≤ 0.05) training duration and absolute squat and bench press 1RM. Powerlifters had significantly less shoulder extension and horizontal abduction, and hip flexion, extension, and adduction than recreationally strength-trained men. Significant negative relationships were found between 2-lift Wilks score (body mass relative strength) and shoulder extension and horizontal abduction, as well as hip flexion and extension. In powerlifters, significant negative relationships were found between competition Wilks score, shoulder extension, and hip flexion. Because these relationships correspond to the bottom position of the squat and bench press, it may be best to ensure that shoulder extension and hip flexion remain sufficient to achieve competition depth. [ABSTRACT FROM AUTHOR]

Maximizing the neuromuscular capacities of players is a critical challenge during short soccer preseasons. This study compared the effects of 2 strength-power training regimes, on the strength, speed, and power performance of elite young soccer players during a 4-week preseason. Twenty-five under-20 players from the same club were pair matched in 2 training groups as follows: traditional training group (TTG) (n = 13), athletes performed half-squat (HS) and jump-squat (JS) exercises as traditionally prescribed, and elastic band (EB) group (EBG) (n = 12), athletes performed HS and JS with EB attached to the barbell. Vertical jump height, 20-m sprint velocity, change of direction (COD) speed, HS and JS power, and 1 repetition maximum (1RM) in the HS were assessed before, after 2-week, and after 4-week of training. A two-way analysis of variance with repeated measures was used to assess the effects of both training protocols over the experimental period. Both strategies were effective for significantly improving HS and JS power (effect sizes [ESs] = 1.00-1.77), HS 1RM (ES = 1.68 and 1.51 for TTG and EBG, respectively), vertical jumping ability (ES = 0.37-0.65), and COD speed (ES = 0.81 and 0.39 for TTG and EBG, respectively), when comparing premeasures and postmeasures. By contrast, both TTG and EBG failed to increase 20-m sprint velocity (ES ranging between -0.54 and 0.23). In conclusion, both training schemes were able to improve the strength and power performance but not the sprint capacity of young soccer players. To accelerate strength gains over very-short time periods (i.e., 2 weeks), variable resistance training may be advantageous. Conversely, to optimize power adaptations in ballistic exercises across a similar time period, traditional free-weight training may be preferred. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effects of strength-training tapers of different intensities but equal volume reductions on neuromuscular performance. Methods: Eleven strength-trained men (21.3 [3.3] y, 92.3 [17.6] kg, relative 1-repetition-maximum deadlift 1.9 [0.2] times bodyweight) completed a crossover study. Specifically, two 4-wk strength-training blocks were followed by a taper week with reduced volume (∼70%) involving either increased (5.9%) or decreased (−8.5%) intensity. Testing occurred pretraining (T1), posttraining (T2), and posttaper (T3). Salivary testosterone and cortisol, plasma creatine kinase, a Daily Analysis of Life Demands in Athletes questionnaire, countermovement jump (CMJ), isometric midthigh pull, and isometric bench press were measured. Results: CMJ height improved significantly over time (P <.001), with significant increases from T1 (38.0 [5.5] cm) to both T2 (39.3 [5.3] cm; P =.010) and T3 (40.0 [5.3] cm; P =.001) and from T2 to T3 (P =.002). CMJ flight time:contraction time increased significantly over time (P =.004), with significant increases from T1 (0.747 [0.162]) to T2 (0.791 [0.163]; P =.012). Isometric midthigh-pull relative peak force improved significantly over time (P =.033), with significant increases from T1 (34.7 [5.0] N/kg) to T2 (35.9 [4.8] N/kg; P =.013). No significant changes were found between tapers. However, the higher-intensity taper produced small effect-size increases at T3 vs T1 for isometric midthigh-pull relative peak force, CMJ height, and flight time:contraction time, while the lower-intensity taper only produced small effect-size improvements at T3 vs T1 for CMJ height. Conclusions: A strength-training taper with volume reductions had a positive effect on power, with a tendency for the higher-intensity taper to produce more favorable changes in strength and power. [ABSTRACT FROM AUTHOR]

Loturco, I, McGuigan, MR, Rodríguez-Rosell, D, Pereira, LA, and Pareja-Blanco, F. A novel strategy to determine the 1-repetition maximum in the jump squat exercise. J Strength Cond Res 36(8): 2330–2334, 2022—This study aimed to determine the maximum relative load of the half-squat (HS; i.e., % HS 1-repetition maximum [1RM]) that can be used in its ballistic variation, namely, the jump squat (JS) exercise, and to examine whether this reference value varies in subjects with different strength levels. In total, 186 elite athletes from 10 distinct sport disciplines participated in this study. A progressive loading test up to HS 1RM was performed during the competitive phase of the season for all athletes. Mean propulsive velocity and propulsive phase duration were also assessed during the 1RM test. Athletes were divided into 3 distinct subgroups: "low," "middle," and "high" strength levels, based on their relative HS 1RM values (kg·kg−1). A 1-way analysis of variance was used to compare the variables assessed between the groups. Significance level was set at p < 0.05. The high group demonstrated the highest relative HS 1RM values, followed by the middle and low groups (all p < 0.05). No significant differences were observed between the groups for the remaining variables (p > 0.05). It was observed that at 86.0 ± 5.4% 1RM, the full concentric action can already be considered as entirely propulsive in the HS exercise for all subjects, independent of their strength levels. Therefore, this relative strength value may be used as a reference for the 1RM in the JS exercise. [ABSTRACT FROM AUTHOR]

Speed and acceleration are crucial to competitive success in all levels of rugby union. However, positional demands affect an athlete's expression of force and velocity during the match. This study investigated maximal sprint performance and horizontal force-velocity (FV) profiles in 176 rugby union players participating in amateur club, professional, and international competitions. Rugby players were divided into 5 positional groups: tight-5 forwards (n = 63), loose forwards (n = 35), inside backs (n = 29), midbacks (n = 22), and outside (n = 27) backs. Sprint performance was averaged across 2 trials of a maximal 30-m sprint, separated by a 3-minute rest. The results demonstrated differences in sprint performance and FV profile characteristics across competitions and positional groups. Specifically, both international and professional players possessed significantly faster split times and superior FV profiles than club players (p < 0.01; effect size [ES]: 0.22-1.42). International players were significantly faster across 0-10 m than professional players (p = 0.03; ES: 0.44-0.47), whereas professional players had faster 10-20 m times (p = 0.03; ES: 0.37-0.41) and a more force-dominant profile (p < 0.01; ES: 0.71-1.00). Across positions, split times decreased and maximal velocity characteristics increased in proportion with increasing positional number, with outside backs being the fastest (ES: 0.38-2.22). On the other hand, both forwards groups had more force-dominant profiles and average sprint momentum across all distances than all backs positions. Interestingly, loose forwards had a more forceful profile and slower 10-, 20-, and 30-m split times but similar maximal velocity characteristics to inside backs, highlighting unique positional demands and physical attributes. [ABSTRACT FROM AUTHOR]

Purpose: Runners use uphill running as a movement-specific form of resistance training to enhance performance. However, the optimal parameters for prescribing intervals are unknown. The authors adopted a dose-response design to investigate the effects of various uphill interval-training programs on physiological and performance measures. Methods: Twenty well-trained runners performed an incremental treadmill test to determine aerobic and biomechanical measures, a series of jumps on a force plate to determine neuromuscular measures, and a 5-km time trial. Runners were then randomly assigned to 1 of 5 uphill interval-training programs. After 6 wk all tests were repeated. To identify the optimal training program for each measure, each runner's percentage change was modeled as a quadratic function of the rank order of the intensity of training. Uncertainty in the optimal training and in the corresponding effect on the given measure was estimated as 90% confidence limits using bootstrapping. Results: There was no clear optimum for time-trial performance, and the mean improvement over all intensities was 2.0% (confidence limits ±0.6%). The highest intensity was clearly optimal for running economy (improvement of 2.4% ± 1.4%) and for all neuromuscular measures, whereas other aerobic measures were optimal near the middle intensity. There were no consistent optima for biomechanical measures. Conclusions: These findings support anecdotal reports for incorporating uphill interval training in the training programs of distance runners to improve physiological parameters relevant to running performance. Until more data are obtained, runners can assume that any form of high-intensity uphill interval training will benefit 5-km time-trial performance. [ABSTRACT FROM AUTHOR]

Purpose: To determine the impact of neuromuscular fatigue (NMF) assessed from variables obtained during a countermovement jump on exercise intensity measured with triaxial accelerometers (load per minute [LPM]) and the association between LPM and measures of running activity in elite Australian Football. Methods: Seventeen elite Australian Football players performed the Yo-Yo Intermittent Recovery Test level 2 (Yo-Yo IR2) and provided a baseline measure of NMF (flight timexontraction time [FT:CT]) from a countermovement jump before the season. Weekly samples of FT:CT, coaches' rating of performance (votes), LPM, and percent contribution of the 3 vectors from the accelerometers in addition to high-speed-running meters per minute at >15 km/hand total distance relative to playing time (m/min) from matches were collected. Samples were divided into fatigued and nonfatigued groups based on reductions in FT:CT. Percent contributions of vectors to LPM were assessed to determine the likelihood of a meaningful difference between fatigued and nonfatigued groups. Pearson correlations were calculated to determine relationships between accelerometer vectors and running variables, votes, and Yo-Yo IR2 score. Results: Fatigue reduced the contribution of the vertical vector by (mean ± 90% CI) -5.8% ±6.1% (86% likely) and the number of practically important correlations. Conclusions: NMF affects the contribution of individual vectors to total LPM, with a likely tendency toward more running at low speed and less acceleration. Fatigue appears to limit the influence of the aerobic and anaerobic qualities assessed via the Yo-Yo IR2 test on LPM and seems implicated in pacing. [ABSTRACT FROM AUTHOR]

Purpose: There is no common theory on criteria to appropriately select crew rowers in pursuit of small performance gains. The purpose of this study was to establish whether anthropometry, rowing ergometry, or lower body strength were suitable criteria to identify differences between selected and nonselected sculling crews. Method: Twelve elite women performed a 2000-m ergometer time trial and a 5-repetition leg-press dynamometer test, were anthropometricaliy profiled, and participated in on-water national crew seat-racing trials. Log-transformed data were analyzed to compare percent (± SD) and standardized differences in group means (ES; ±90% confidence interval [CI]) between selected and nonselected oarswomen, with adjustments for body mass where appropriate. Results: Selected crew boats were 4.60% ± 0.02% faster and won by an average margin of 13.5 ± 0.7 s over 1500 m. There were no differences between crews on average in height, arm span, seated height, body mass, or 8-site skinfold sum (body fat). Difference in 2000-m ergometer times were also trivial (ES = 0.2, 90%CI = -0.6 to 1.1, P = .63); however, selected crews had moderately greater leg-press strength (ES =1.1, 90%CI = 0.3-1.9, P = .03). Conclusion: Selected oarswomen with comparable anthropometry and 2000-m ergometer ability had greater lower body strength. Coaches of elite oarswomen might consider leg strength as part of crew-selection criteria, given acceptable on-water boatmanship and attainment of 2000-m ergometer benchmarks. [ABSTRACT FROM AUTHOR]

This study aimed to examine the effects of two jump squat (JS) training programs involving different loading ranges in under-20 soccer players during a preseason period. Twenty-three elite young soccer players performed sprint speed (at 5-, 10-, and 20-m), change-of-direction (COD) speed, JS peak-power (PP), and countermovement jump (CMJ) tests pre and post four weeks of training. Athletes were pair-matched in two groups according to their optimum power loads (OPL) as follows: lower than OPL (LOPL; athletes who trained at a load 20% lower than the OPL) and higher than OPL (HOPL; athletes who trained at a load 20% higher than the OPL). Magnitude-based inferences were used to compare pre- and post-training measures. Meaningful increases in the PP JS were observed for both groups. Likely and possible improvements were observed in the 5- and 10-m sprint velocity in the LOPL group. Meanwhile, possible and likely improvements were observed in the CMJ, 5- and 10-m sprint velocity, and COD speed in the HOPL group. Overall, both training schemes induced positive changes in athletic performance. Soccer coaches and sport scientists can implement the JS OPL-based training schemes presented here, either separately or combined, to improve the physical performance of youth soccer players. [ABSTRACT FROM AUTHOR]

The use of strength training designed to increase underlying strength and power qualities in elite athletes in an attempt to improve athletic performance is commonplace. Although the extent to which strength and power are important to sports performance may vary depending on the activity, the associations between these qualities and performance have been well documented in the literature. The purpose of this review is to provide a brief overview of strength training research to determine if it really helps improve athletic performance. While there is a need for more research with elite athletes to investigate the relationship between strength training and athletic performance, there is sufficient evidence for strength training programs to continue to be an integral part of athletic preparation in team sports.

This study aimed to compare the power production in traditional bench-press (TBP) and ballistic bench-throw (BBT) exercises. Furthermore, we assessed the differences in velocity, force, and power outputs between TBP and BBT. Finally, we tested the differences between the loads used to optimize power (optimum power load; OPL) in both exercises, using three distinct power-variables: mean power (MP), mean propulsive power (MPP), and peak power (PP). Sixty athletes from different sports were divided into two groups, according to their training characteristics: hypertrophy-based trained athletes (HTA), thirty-one athletes performing hypertrophy training programmes for (at least) 12-weeks; and power-based trained athletes (PTA), twenty-nine athletes performing power-oriented training sessions for (at least) 12-weeks. Magnitude-based inferences were used to test for differences between groups. Independent of the variable analyzed (MP, MPP, or PP), the PTA produced greater power values in BBT, whereas the HTA generated higher outputs during TBP. The OPL in the HTA was likely heavier in TBP than in BBT, whereas no differences related to this variable were found in the PTA. Despite the apparent superiority of ballistics to produce power, it seems that in elite athletes, the strength-power training routine might affect the ability to apply high forces at very-high velocities. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the relationships between concentric and eccentric peak force (PF) and countermovement jump (CMJ) performance in resistance trained men. Subjects were 12 men (mean ± SD; age: 25.4 ± 3.5 years; height: 177.2 ± 4.5 cm; mass: 84.0 ± 10.1 kg). The men were tested for concentric and eccentric PF using the Exerbotics squat device. Subjects then completed 3 CMJs to allow for the calculation of peak power (PP), peak ground reaction force, and jump height (JH). Correlations between the variables of interest were calculated using Pearson product-moment correlation coefficients. A large relationship was found between absolute concentric PF and absolute CMJ PP (r = 0.66, p ≤ 0.05). Absolute eccentric PF had a very large relationship with absolute CMJ PP and CMJ JH (r = 0.74, p < 0.01 and r = 0.74, p < 0.001, respectively). In addition, absolute eccentric PF was found to have a moderate relationship with relative CMJ PP (r = 0.58, p ≤ 0.05). Relative eccentric PF was had a very large relationship with relative CMJ PP and CMJ JH (r = 0.73, p < 0.001 and r = 0.79, p < 0.001, respectively). Based on these findings, strength and conditioning coaches and athletes who wish to enhance CMJ performance may wish to include exercises, which enhance lower-body eccentric strength within their training. [ABSTRACT FROM AUTHOR]

The aims of this study were (a) to investigate the acute effects of different drop jump (DJ) accentuated eccentric loading (AEL) protocols and (b) to investigate the effect of these AEL DJ protocols on subsequent countermovement jump (CMJ) performance. The subjects were 12 strength-trained athletes; initially, baseline CMJ performance was assessed and individual optimal DJ drop height identified. In subsequent weeks, subjects completed 1 set of 5 DJs with no additional load or an AEL of 10, 20, or 30% of their individual body mass (BM) using dumbbells to provide the extra load. After the AEL DJ protocols, 3 CMJs were completed after 2, 6, and 12 minutes rest. A generalized linear mixed model was used to investigate the effects of AEL load and time post-DJs on CMJ height, peak power, and ground reaction force. The 20% AEL condition resulted in greater CMJ height in comparison with all other conditions (p < 0.001). CMJ height was significantly greater after 2 and 6 minutes rest compared with 12 minutes (p < 0.001 and p ≤ 0.05 respectively). Greater peak power was also found during the CMJs after the 20% AEL condition compared with baseline, BM, and 10% AEL (p ≤ 0.05). In conclusion, 5 DJs with 20% AEL followed by a 2 minutes recovery period resulted in significant enhancement in CMJ height and peak power. [ABSTRACT FROM AUTHOR]

The major aim of this study was to determine tapering strategies of elite powerlifters. Eleven New Zealand powerlifters (28.4 ± 7.0 years, best Wilks score of 431.9 ± 43.9 points) classified as elite were interviewed, using semistructured interviews, about their tapering strategies. Interviews were transcribed verbatim and content analyzed. Total training volume peaked 5.2 ± 1.7 weeks from competition while average training intensity (of 1 repetition maximum) peaked 1.9 ± 0.8 weeks from competition. During tapering, volume was reduced by 58.9 ± 8.4% while intensity was maintained (or slightly reduced) and the final weight training session was performed 3.7 ±1.6 days out from competition. Participants generally stated that tapering was performed to achieve full recovery; that accessory work was removed around 2 weeks out from competition; and deadlifting takes longer to recover from than other lifts. Typically participants stated that trial and error, and changes based on "feel" were the sources of tapering strategies; equipment used and movements performed during tapering are the same as in competition; nutrition was manipulated during the taper (for weight cutting or performance aims); and poor tapering occurred when too long (1 week or more) was taken off training. These results suggest that athletes may benefit from continuing to strength train before important events with reduced volume and maintained intensity. Only exercises that directly assist sports performance should remain in the strength program during tapering, to assist with reductions in fatigue while maintaining/improving strength expression and performance. [ABSTRACT FROM AUTHOR]

This study assessed reliability of discrete ground reaction force (GRF) variables over multiple pitching trials, investigated the relationships between discrete GRF variables and pitch velocity (PV) and assessed the variability of the "force signature" or continuous force-time curve during the pitching motion of windmill softball pitchers. Intraclass correlation coefficient (ICC) for all discrete variables was high (0.86-0.99) while the coefficient of variance (CV) was low (1.4-5.2%). Two discrete variables were significantly correlated to PV; second vertical peak force (r(5)=0.81, p=0.03) and time between peak forces (r(5)=-0.79; p=0.03). High ICCs and low CVs support the reliability of discrete GRF and PV variables over multiple trials and significant correlations indicate there is a relationship between the ability to produce force and the timing of this force production with PV. The mean of all pitchers' curve-average standard deviation of their continuous force-time curves demonstrated low variability (CV=4.4%) indicating a repeatable and identifiable "force signature" pattern during this motion. As such, the continuous force-time curve in addition to discrete GRF variables should be examined in future research as a potential method to monitor or explain changes in pitching performance. [ABSTRACT FROM AUTHOR]

The article discusses research which investigated correlation between vertical and horizontal jump variables and muscular architecture in athletes. Topics explored include the use of jumping movements such as countermovement jump, squat jump, and drop jump in the evaluation of lower-limb strength, the recruitment and compliance of study participants to muscle power testing sessions, and the observed link between sprint performance and muscular strength.

The article discusses research which investigated the relationship between physical performance and match performance in Australian Rules Football. Researchers evaluated the performance of 36 semiprofessional players. They found that the three kilometer time trial performance was a predictor of direct game involvement per minute and that playing experience was related to match performance.

The article focuses on a comparison of speed, strength, and power characteristics between playing positions in rugby league players. It states that testing included sprint mechanics on a nonmotorized treadmill, sprint times for 10 and 40 meters, and concentric isokinetic hip and knee extension and flexion. It reports no significant differences were discovered between forwards and backs during relative knee extension and flexion or isokinetic hip extension and flexion.

The article reports on research which was conducted to investigate the lower body determinants of running economy in male and female distance runners. Researchers evaluated 63 male and female runners. They found that while leg stiffness and movement are related to running economy, no single lower body measure can completely explain differences in running economy between individuals or genders.

The article reports on research conducted to investigate performance changes and muscle architecture changes that occur in female softball players during competition and training which included resistance training (RT). Researchers evaluated 10 players. They found that gains in strength, power, and performance can occur during the season in elite softball players who are also engaged in a periodized RT program and that changes in muscle architecture resulted from performance improvements.

In the quest to maximize average propulsive stroke impulses over 2000-m racing, testing and training of various strength parameters have been incorporated into the physical conditioning plans of rowers. Thus, the purpose of this review was 2-fold: to identify strength tests that were reliable and valid correlates (predictors) of rowing performance; and, to establish the benefits gained when strength training was integrated into the physical preparation plans of rowers. The reliability of maximal strength and power tests involving leg extension (e.g. leg pressing) and arm pulling (e.g. prone bench pull) was high (intra-class correlations 0.82-0.99), revealing that elite rowers were significantly stronger than their less competitive peers. The greater strength of elite rowers was in part attributed to the correlation between strength and greater lean body mass (r = 0.57-0.63). Dynamic lower body strength tests that determined the maximal external load for a one-repetition maximum (1RM) leg press (kg), isokinetic leg extension peak force (N) or leg press peak power (W) proved to be moderately to strongly associated with 2000-m er-gometer times (r = -0.54 to -0.68; p < 0.05). Repetition tests that assess muscular or strength endurance by quantifying the number of repetitions accrued at a fixed percentage of the strength maximum (e.g. 50-70% 1 RM leg press) or set absolute load (e.g. 40 kg prone bench pulls) were less reliable and more time consuming when compared with briefer maximal strength tests. Only leg press repetition tests were correlated with 2000-m ergometer times (e.g. r = -0.67; p < 0.05). However, these tests differentiate training experience and muscle morphology, in that those individuals with greater training experience and/or proportions of slow twitch fibres performed more repetitions. Muscle balance ratios derived from strength data (e.g. hamstring-quadriceps ratio <45% or knee extensor-elbow flexor ratio around 4.210.22 to 1) appeared useful in the pathological assessment of low back pain or rib injury history associated with rowing. While strength partially explained variances in 2000-m ergometer performance, concurrent endurance training may be counterproductive to strength development over the shorter term (i.e. <12 weeks). Therefore, prioritization of strength training within the sequence of training units should be considered, particularly over the non-competition phase (e.g. 2-6 sets x 4-12 repetitions, three sessions a week). Maximal strength was sustained when infrequent (e.g. one or two sessions a week) but intense (e.g. 73-79% of maximum) strength training units were scheduled; however, it was unclear whether training adaptations should emphasize maximal strength, endurance or power in order to enhance performance during the competition phase. Additionally, specific on-water strength training practices such as towing ropes had not been reported. Further research should examine the on-water benefits associated with various strength training protocols, in the context of the training phase, weight division, experience and level of rower, if limitations to the reliability and precision of performance data (e.g. 2000-m time or rank) can be controlled. In conclusion, while positive ergometer time-trial benefits of clinical and practical significance were reported with strength training, a lack of statistical significance was noted, primarily due to an absence of quality long-term controlled experimental research designs. [ABSTRACT FROM AUTHOR]

This series of reviews focuses on the most important neuromuscular function in many sport performances: the ability to generate maximal muscular power. Part 1, published in an earlier issue of Sports Medicine, focused on the factors that affect maximal power production while part 2 explores the practical application of these findings by reviewing the scientific literature relevant to the development of training programmes that most effectively enhance maximal power production. The ability to generate maximal power during complex motor skills is of paramount importance to successful athletic performance across many sports. A crucial issue faced by scientists and coaches is the development of effective and efficient training programmes that improve maximal power production in dynamic, multi-joint movements. Such training is referred to as 'power training' for the purposes of this review. Although further research is required in order to gain a deeper understanding of the optimal training techniques for maximizing power in complex, sports-specific movements and the precise mechanisms underlying adaptation, several key conclusions can be drawn from this review. First, a fundamental relationship exists between strength and power, which dictates that an individual cannot possess a high level of power without first being relatively strong. Thus, enhancing and maintaining maximal strength is essential when considering the long-term development of power. Second, consideration of movement pattern, load and velocity specificity is essential when designing power training programmes. Ballistic, plyometric and weightlifting exercises can be used effectively as primary exercises within a power training programme that enhances maximal power. The loads applied to these exercises will depend on the specific requirements of each particular sport and the type of movement being trained. The use of ballistic exercises with loads ranging from 0% to 50% of one-repetition maximum (1RM) and/or weightlifting exercises performed with loads ranging from 50% to 90% of 1RM appears to be the most potent loading stimulus for improving maximal power in complex movements. Furthermore, plyometric exercises should involve stretch rates as well as stretch loads that are similar to those encountered in each specific sport and involve little to no external resistance. These loading conditions allow for superior transfer to performance because they require similar movement velocities to those typically encountered in sport. Third, it is vital to consider the individual athlete's window of adaptation (i.e. the magnitude of potential for improvement) for each neuromuscular factor contributing to maximal power production when developing an effective and efficient power training programme. A training programme that focuses on the least developed factor contributing to maximal power will prompt the greatest neuromuscular adaptations and therefore result in superior performance improvements for that individual. Finally, a key consideration for the long-term development of an athlete's maximal power production capacity is the need for an integration of numerous power training techniques. This integration allows for variation within power meso-/micro-cycles while still maintaining specificity, which is theorized to lead to the greatest long-term improvement in maximal power. [ABSTRACT FROM AUTHOR]

The aim of this study was to examine changes in body mass (BM) and power-related measures in Olympic boxers during an official qualifying boxing tournament. Fourteen elite amateur boxers from the Brazilian National Team (eight men and six women) participated in this study. Athletes performed three fights in four days against the same opponent of the same weight-category. Before and immediately after every fight, BM, countermovement jump (CMJ) height, and power production in the bench-press and half-squat exercises were assessed in the same order and on the same time of the day. A two-way repeated-measures ANOVA with the Bonferroni post-hoc analysis was used to determine the variations between pre- and post-measures. The statistical significance was set as p < 0.05. The athletes were able to maintain their baseline weight and physical performance throughout the experimental period, as shown by the lack of significant changes in BM, CMJ height, and upper- and lower-limb power output. Throughout a four-day qualifying tournament, the BM and power-related performance of Olympic boxers were not affected either by match execution or by successive matches. As scoring actions are highly dependent on muscle power, it is likely that these combat athletes are able to maintain optimal levels of performance across consecutive matches. [ABSTRACT FROM AUTHOR]

The purpose of this investigation was to examine the relationships between measures of maximal isometric force (PF), rate of force development (RFD), vertical jump performance (VJ) and one repetition maximum (1RM) strength in recreationally trained men. The subjects in this study were 26 men ((mean ± SD): age 22 ± 1 years; height 175 ± 7 cm; mass 90 ± 10 kg). They were tested for PF using the isometric mid thigh pull exercise. The 1RM for the squat and bench press exercise were determined as a measure of dynamic strength. Explosive strength was measured as RFD from the isometric force-time curve. Correlations between the variables were calculated using Pearson product moment correlation coefficient. There was a nearly perfect correlation between measures of PF and 1RM squat (r = 0.97, p < 0.05) and 1RM bench press (r = 0.99, p < 0.05). The correlations were very strong between VJ and PF (r = 0.72, p < 0.05) and 1RM bench press (r = 0.70, p < 0.05). There were also strong correlations between VJ and 1RM squat (r = 0.69, p < 0.05). There were no significant correlations with RFD. The results showed that isometric maximum strength determined during the isometric mid thigh pull test correlated well with 1RM and VJ testing. However, RFD measured during the same test did not appear to correlate as well with other measures. The isometric mid thigh pull provides an efficient method for assessing strength in recreationally trained individuals. Practioners wishing to obtain performance data related to maximum strength may wish to consider isometric testing as a less time intensive method of testing. [ABSTRACT FROM AUTHOR]

PURPOSE: Heavy-resistance training and plyometric training offer distinct physiological and neuromuscular adaptations that could enhance running economy and, consequently, distance-running performance. To date, no studies have examined the effect of combining the two modes of training on running economy or performance. METHODS: Fifty collegiate male and female cross-country runners performed a 5-km time trial and a series of laboratory-based tests to determine aerobic, anthropometric, biomechanical, and neuromuscular characteristics. Thereafter, each athlete participated in a season of six to eight collegiate cross-country races for 13 wk. After the first 4 wk, athletes were randomly assigned to either heavy-resistance or plyometric plus heavy-resistance training. Five days after completing their final competition, runners repeated the same set of laboratory tests. We also estimated the effects of the intervention on competition performance throughout the season using athletes of other teams as controls. RESULTS: Heavy-resistance training produced small-moderate improvements in peak speed, running economy, and neuromuscular characteristics relative to plyometric resistance training, whereas changes in biomechanical measures favored plyometric resistance training. Men made less gains than women in most tests. Both treatments had possibly harmful effects on competition times in men (mean = 0.5%; 90% confidence interval = ±1.2%), but there may have been benefit for some individuals. Both treatments were likely beneficial for all women (-1.2%; ±1.3%), but heavy-resistance training was possibly better than plyometric resistance training. CONCLUSIONS: The changes in laboratory-based parameters related to distance-running performance were consistent with the changes in competition times for women but only partly for men. Our data indicate that women should include heavy-resistance training in their programs, but men should be cautious about using it in season until more research establishes whether certain men are positive or negative responders. [ABSTRACT FROM AUTHOR]