Search

Phasin is a surface-binding protein of polyhydroxyalkanoate (PHA) granules that is encoded by the phaP gene. As its expression increases, PHA granules become smaller, to increase their surface area, and are densely packed inside the cell, thereby increasing the PHA content. A wide range of PHA-producing bacteria have phaP genes; however, their PHA productivity differs, although they are derived from the cognate bacterial host cell. Modulating phasin expression could be a new strategy to enhance PHA production. This study aimed to characterize the effect of heterologous phasins on the reconstitution of E. coli BL21(DE3) and determine the best synergistic phaP gene combination to produce polyhydroxybutyrate (PHB). We identified novel phasins from a PHB high-producer strain, Halomonas sp. YLGW01, and introduced a combination of phaP genes into Escherichia coli. The resulting E. coli phaP1,3 strain had enhanced PHB production by 2.9-fold, leading to increased cell mass and increased PHB content from 48 % to 65 %. This strain also showed increased tolerance to inhibitors, such as furfural and vanillin, enabling the utilization of lignocellulose biosugar as a carbon source. These results suggested that the combination of phaP1 and phaP3 genes from H. sp. YLGW01 could increase PHB production and robustness.

Polyhydroxybutyrate (PHB) is a potential substitute for plastics derived from fossil fuels, owing to its biodegradable and biocompatible properties. Lignocellulosic biomass could be used to reduce PHB production costs; however, the co-utilization of sugars, such as glucose and xylose, without catabolite repression is a difficult problem to be solved. Here, we selected a novel Loktanella sp. SM43 from a marine environment and optimized the conditions for PHB production. Loktanella sp. SM43 showed high PHB production (66.5% content) from glucose. When glucose and xylose were used together, this strain showed high utilization of both substrates compared to other high PHB-producers such as Halomonas sp. and Cupriavidus necator, which showed glucose preference. Loktanella sp. SM43 showed high growth and PHB production with lignocellulosic hydrolysates. When pine tree hydrolysates were used, PHB production was the highest at 3.66 ± 0.01 g/L, followed by Miscanthus (3.46 ± 0.09 g/L) and barley straw hydrolysate (3.36 ± 0.36 g/L). Overall, these results reveal the potential of Loktanella sp. SM43 to produce PHB using various lignocellulosic hydrolysates as feedstock and the first systematic study for PHB production with Loktanella sp. The approach of screening novel strains is a strategy to overcome co-utilization of sugars without genetic engineering.

Polyhydroxyalkanoates (PHAs) and their derivatives are biopolymers that have the potential of replacing petroleum-based plastics and can be produced and degraded via bacterial metabolism. However, there are only a few studies on polyhydroxybutyrate (PHB) production using lactate, one of the major waste organic acids that could be implemented in the production of polylactic acid (PLA). Herein, we screened and characterized the PHA-producing microbial strains isolated from saltern soil from Docho Island (South Korea). Among the 24 identified microorganisms that can use lactate as a carbon source, Bacillus sp. YHY22, a newly reported strain, produced the highest amount of PHB: 4.05 g/L with 6.25 g/L dry cell weight, which is 64.7% PHB content under optimal production conditions. Bacillus sp. YHY22 could form the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer with propionate addition. Moreover, Bacillus sp. YHY22 produced PHB in non-sterilized 2% lactate and 8% NaCl marine broth culture medium, suggesting that its production can occur in high salinity media without additional sterilization steps, rendering fermentation cost- and time-efficient.

Phasin (PhaP), one of the polyhydroxyalkanoate granule-associated protein, enhances cell growth and polyhydroxybutyrate (PHB) biosynthesis by regulating the number and size of PHB granules. However, few studies have applied phasins to various PHB production conditions. In this study, we identified novel phasin genes from the genomic data of Arctic soil bacterium Pseudomonas sp. B14-6 and determined the role of phaP1Ps under different PHB production conditions. Transmission electron microscopy and gel permeation chromatography revealed small PHB granules with high-molecular weight, while differential scanning calorimetry showed that the extracted PHB films had similar thermal properties. The phasin protein derived from Pseudomonas sp. B14-6 revealed higher PHB production and exhibited higher tolerance to several lignocellulosic biosugar-based inhibitors than the phasin protein of Ralstonia eutropha H16 in a recombinant Escherichia coli strain. The increased tolerance to propionate, temperature, and other inhibitors was attributed to the introduction of phaP1Ps, which increased PHB production from lignocellulosic hydrolysate (2.39-fold) in the phaP1Ps strain. However, a combination of phasin proteins isolated from two different sources did not increase PHB production. These findings suggest that phasin could serve as a powerful means to increase robustness and PHB production in heterologous strains.

Broussochalcone A (BCA) is a chalcone compound extracted from the cortex of Broussonetiapapyrifera (L.) Ventenat that exerts various effects, such as potent antioxidant, antiplatelet, and anticancer effects. However, the effects of BCA against cancers have been seldom studied. This study is aimed at demonstrating the apoptotic mechanisms of BCA in A498 and ACHN cells, which are two types of human renal cancer cell lines. MTT, cell counting, and colony formation assays indicated that BCA treatment inhibited cell viability and cell growth. Further, cell cycle analysis revealed that BCA induced cell cycle arrest at the G2/M phase. Annexin V/PI staining and TUNEL assays were performed to determine the apoptotic effects and DNA fragmentation after treatment with BCA. Based on western blot analysis, BCA induced the upregulation of cleaved PARP, FOXO3, Bax, p21, p27, p53, phosphorylated p53 (ser15, ser20, and ser46), and active forms of caspase-3, caspase-7, and caspase-9 proteins, but downregulated the proforms of the proteins. The expression levels of pAkt, Bcl-2, and Bcl-xL were also found to be downregulated. Western blot analysis of nuclear fractionation results revealed that BCA induced the nuclear translocation of FOXO3, which might be induced by DNA damage owing to the accumulation of reactive oxygen species (ROS). Elevated intracellular ROS levels were also found following BCA treatment. Furthermore, DNA damage was detected after BCA treatment using a comet assay. The purpose of this study was to elucidate the apoptotic effects of BCA against renal cancer A498 and ACHN cells. Collectively, our study findings revealed that the apoptotic effects of BCA against human renal cancer cells occur via the elevation of ROS level and activation of the FOXO3 signaling pathway.

Methicillin-resistant Staphylococcus aureus (MRSA), one of the most well-known human pathogens, houses many virulence factors and regulatory proteins that confer resistance to diverse antibiotics. Although they have been investigated intensively, the correlations among virulence factors, regulatory proteins and antibiotic resistance are still elusive. We aimed to identify the most significant global MRSA regulator by concurrently analyzing protein-binding and several promoters under same conditions and at the same time point. DNA affinity capture assay (DACA) was performed with the promoters of mecA, sarA, and sarR, all of which significantly impact survival of MRSA. Here, we show that SarA protein binds to all three promoters. Consistent with the previous reports, ΔsarA mutant exhibited weakened antibiotic resistance to oxacillin and reduced biofilm formation. Additionally, production and activity of many virulence factors such as phenol-soluble modulins (PSM), α-hemolysin, motility, staphyloxanthin, and other related proteins were decreased. Comparing the sequence of SarA with that of clinical strains of various lineages showed that all sequences were highly conserved, in contrast to that observed for AgrA, another major regulator of virulence and resistance in MRSA. We have demonstrated that SarA regulates antibiotic resistance and the expression of various virulence factors. Our results warrant that SarA could be a leading target for developing therapeutic agents against MRSA infections.

Whole-cell systems offer many benefits for biochemical production, such as relatively easy enzyme control and higher tolerance toward harsh environments, than purified enzymes. These systems can be applied to many bioconversion reactions, but they sometimes require cofactor regeneration units to support reactions at high substrate concentrations. Here, we examined l-glutamate oxidase (GOX) from Streptomyces sp. X119-6, which produces α-ketoglutarate (α-KG) from l-glutamate, and catalase (KatE) from Escherichia coli, which removes hydrogen peroxide generated by GOX. After optimizing the expression vector, pH, strains, culture conditions, and isopropyl β-d-1-thiogalactopyranoside concentration, we compared their efficiency to that of a previously reported GOX from Streptomyces mobaraensis. Our results indicated that GOX from Streptomyces sp. X119-6 and KatE increased α-KG production by 2.76-fold. This GOX required high levels of α-KG as an amino donor to convert 5-aminovaleric acid to glutaric acid. Performing the reaction at pH 8 enabled us to avoid the exogenous addition of catalase, but severe substrate inhibition was observed, resulting in the production of 287 mM glutaric acid. This α-KG regeneration system has potential for improving production in various aminotransferase systems.

Polyhydroxybutyrate (PHB) is a biodegradable plastic with physical properties similar to petrochemically derived plastics. Here, Shewanella marisflavi BBL25 was engineered by inserting the pLW487 vector containing polyhydroxyalkanoates synthesis genes from Ralstonia eutropha H16. Under optimal conditions, the engineered S. marisflavi BBL25 produced 1.99 ± 0.05 g/L PHB from galactose. The strain showed high tolerance to various inhibitors and could utilize lignocellulosic biomass for PHB production. When barley straw hydrolysates were used as a carbon source, PHB production was 3.27 ± 0.19 g/L. In addition, PHB production under the microbial fuel cell system was performed to confirm electricity coproduction. The maximum electricity current output density was 1.71 mA/cm2, and dry cell weight (DCW) and PHB production were 11.4 g/L and 6.31 g/L, respectively. Our results demonstrated PHB production using various lignocellulosic biomass and the feasibility of PHB and electricity production, simultaneously, and it is the first example of PHB production in engineered Shewanella.

Polyhydroxybutyrate (PHB) is a biodegradable plastic that can be used as an alternative to petrochemical-based plastics. PHB is produced by various microorganisms such as Ralstonia, Halomonas, and Bacillus species. However, there are very few strains that produce PHB using xylose, an abundant and inexpensive carbon source. In this study, ten xylose-utilizing PHB producers isolated from South Korean marine environments were screened and characterized. Among these isolates, Bacillus sp. SM01, a newly identified strain, produced the highest amount of PHB using xylose. Under optimal conditions, the maximum dry cell weight (DCW) was 3.41 ± 0.09 g/L, with 62% PHB content, and Bacillus sp. SM01 showed Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer production with propionate; however, the growth of Bacillus sp. SM01 was greatly inhibited by the presence of glucose. Co-culturing Bacillus sp. SM01 with Cupriavidus necator NCIMB 11599 resulted in increased DCW, PHB production, and utilization of glucose and xylose, the main sugar of lignocellulosic biomass, compared with the monoculture. Our results indicated that this co-culture system can be used to increase PHB production and overcome the limitation of sugar consumption associated with Bacillus sp. SM01 and C. necator.

Poly(3-hydroxybutyrate) (PHB) is a biobased and biodegradable plastic. Considering the environmental issues of petroleum-based plastics, PHB is promising as it can be degraded in a relatively short time by bacteria to water and carbon dioxide. Substantial efforts have been made to identify PHB-degrading bacteria. To identify PHB-degrading bacteria, solid-based growth or clear zone assays using PHB as the sole carbon source are the easiest methods; however, PHB is difficult to dissolve and distribute evenly, and bacteria grow slowly on PHB plates. Here, we suggest an improved PHB plate assay using cell-grown PHB produced by Halomonas sp. and recovered by sodium dodecyl sulfate (SDS). Preparation using SDS resulted in evenly distributed PHB plates that could be used for sensitive depolymerase activity screening in less time compared with solvent-melted pellet or cell-grown PHB. With this method, we identified 15 new strains. One strain, Cutibacterium sp. SOL05 (98.4% 16S rRNA similarity to Cutibacterium acne), showed high PHB depolymerase activity in solid and liquid conditions. PHB degradation was confirmed by clear zone size, liquid culture, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The results indicate this method can be used to easily identify PHB-degrading bacteria from various sources to strengthen the benefits of bioplastics.

Violacein is a pigment synthesized by Gram-negative bacteria such as Chromobacterium violaceum. It has garnered significant interest owing to its unique physiological and biological activities alon...

Cadaverine, 1,5-diaminopentane, is one of the most promising chemicals for biobased-polyamide production and it has been successfully produced up to molar concentration. Pyridoxal 5′-phosphate (PLP) is a critical cofactor for inducible lysine decarboxylase (CadA) and is required up to micromolar concentration level. Previously the regeneration of PLP in cadaverine bioconversion has been studied and salvage pathway pyridoxal kinase (PdxY) was successfully introduced; however, this system also required a continuous supply of adenosine 5′-triphosphate (ATP) for PLP regeneration from pyridoxal (PL) which add in cost. Herein, to improve the process further a method of ATP regeneration was established by applying baker’s yeast with jhAY strain harboring CadA and PdxY, and demonstrated that providing a moderate amount of adenosine 5′-triphosphate (ATP) with the simple addition of baker’s yeast could increase cadaverine production dramatically. After optimization of reaction conditions, such as PL, adenosine 5′-diphosphate, MgCl2, and phosphate buffer, we able to achieve high production (1740 mM, 87% yield) from 2 M l-lysine. Moreover, this approach could give averaged 80.4% of cadaverine yield after three times reactions with baker’s yeast and jhAY strain. It is expected that baker’s yeast could be applied to other reactions requiring an ATP regeneration system.

Poly(3-hydroxybutyrate) (PHB) is a common polyhydroxyalkanoate (PHA) with potential as an alternative for petroleum-based plastics. Previously, we reported a new strain, Halomonas sp. YLGW01, which hyperproduces PHB with 94% yield using fructose. In this study, we examined the PHB production machinery of Halomonas sp. YLGW01 in more detail by deep-genome sequencing, which revealed a 3,453,067-bp genome with 65.1% guanine-cytosine content and 3054 genes. We found two acetyl-CoA acetyltransferases (Acetoacetyl-CoA thiolase, PhaA), one acetoacetyl-CoA reductase (PhaB), two PHB synthases (PhaC1, PhaC2), PHB depolymerase (PhaZ), and Enoyl-CoA hydratase (PhaJ) in the genome, along with two fructose kinases and fructose transporter systems, including the phosphotransferase system (PTS) and ATP-binding transport genes. We then examined the PHB production by Halomonas sp. YLGW01 using high-fructose corn syrup (HFCS) containing fructose, glucose, and sucrose in sea water medium, resulting in 7.95 ± 0.11 g/L PHB (content, 67.39 ± 0.34%). PHB was recovered from Halomonas sp. YLGW01 using different detergents; the use of Tween 20 and SDS yielded micro-sized granules with high purity. Overall, these results reveal the distribution of PHB synthetic genes and the sugar utilization system in Halomonas sp. YLGW01 and suggest a possible method for PHB recovery.

The increasing interest in bioplastics, with regard to future environmental issues, has rendered research on bioplastic biodegradation highly important. However, only a few tools directly monitor the degradation of bioplastics without measuring the levels of gaseous products, such as carbon dioxide. Classical nonquantitative methods, such as clear zone tests on solid plates, and less-sensitive weight-loss experiments in liquid media measured using a precision scale, are still employed to screen the microbial players associated with bioplastic degradation and monitor the biodegradation rates. However, the simultaneous monitoring of the degradation of each component of blended bioplastics has not been previously reported. In the present study, to provide information regarding the degradation rates and compositional changes of different bioplastics in a blend in a time-dependent manner, we simultaneously monitored and quantified the degradation of four bioplastics, polyhydroxybutyrate (PHB), polybutylene succinate (PBS), polycaprolactone (PCL), and poly(butylene adipate-co-terephthalate) (PBAT), by Bacillus sp. JY36 using gas chromatography-mass spectrometry (GC-MS) analysis after fatty acid methyl ester (FAME) derivatization. Our results demonstrate the feasibility of using the GC-MS-based method described here to obtain comprehensive data regarding blended bioplastics and their degradation. Moreover, our findings indicate that this method may support classical analytic tools for assessing bioplastic biodegradation.

Psychrophilic bacteria, living at low and mild temperatures, can contribute significantly to our understanding of microbial responses to temperature, markedly occurring in the bacterial membrane. Here, a newly isolated strain, Pseudomonas sp. B14-6, was found to dynamically change its unsaturated fatty acid and cyclic fatty acid content depending on temperature which was revealed by phospholipid fatty acid (PLFA) analysis. Genome sequencing yielded the sequences of the genes Δ-9-fatty acid desaturase (desA) and cyclopropane-fatty acid-acyl-phospholipid synthase (cfa). Overexpression of desA in Escherichia coli led to an increase in the levels of unsaturated fatty acids, resulting in decreased membrane hydrophobicity and increased fluidity. Cfa proteins from different species were all found to promote bacterial growth, despite their sequence diversity. In conclusion, PLFA analysis and genome sequencing unraveled the temperature-related behavior of Pseudomonas sp. B14-6 and the functions of two membrane-related enzymes. Our results shed new light on temperature-dependent microbial behaviors and might allow to predict the consequences of global warming on microbial communities.

γ-Aminobutyric acid (GABA), an important fine chemical in pharmacotherapy and food industries, is used as a novel material in the nylon industry and has attracted attention for its potential application in large scale production. Search for new genes and strains, development of efficient reaction systems, such as fermentation and bioconversion, and use of cheap starting material like monosodium glutamate (MSG) can make GABA production using less expensive bulk chemicals possible. Therefore, in this study, we constructed a recombinant Escherichia coli whole-cell system for GABA production that expressed glutamate decarboxylase (GAD) from Lactobacillus brevis and used MSG as the starting material. We also optimized the reaction conditions for MSG to GABA conversion, such as citrate buffer concentration, pyridoxal 5′te concentration, temperature, MSG concentration, and cell density (OD600). The optimized whole-cell system converted MSG to GABA via seven repetitive cycles resulting in an average conversion rate of 86% (71.7 mM/h) within 42 h.

L-Theanine, found in green tea leaves has been shown to positively affect immunity and relaxation in humans. There have been many attempts to produce L-theanine through enzymatic synthesis to overcome the limitations of traditional methods. Among the many genes coding for enzymes in the L-theanine biosynthesis, glutamylmethylamide synthetase (GMAS) exhibits the greatest possibility of producing large amounts of production. Thus, GMAS from Methylovorus mays No. 9 was overexpressed in several strains including vectors with different copy numbers. BW25113(DE3) cells containing the pET24ma::gmas was selected for strains. The optimal temperature, pH, and metal ion concentration were 50°C, 7, and 5 mM MnCl2, respectively. Additionally, ATP was found to be an important factor for producing high concentration of L-theanine so several strains were tested during the reaction for ATP regeneration. Bakers yeast was found to decrease the demand for ATP most effectively. Addition of potassium phosphate source was demonstrated by producing 4-fold higher L-theanine. To enhance the conversion yield, GMAS was additionally overexpressed in the system. A maximum of 198 mM L-theanine was produced with 16.5 mmol/l/h productivity. The whole-cell reaction involving GMAS has greatest potential for scale-up production of L-theanine.

Branched chain fatty acids (BCFA) are an appealing biorefinery-driven target of fatty acid (FA) production. BCFAs typically have lower melting points compared to straight chain FAs, making them useful in lubricants and biofuels. Actinobacteria, especially Streptomyces species, have unique secondary metabolism that are capable of producing not only antibiotics, but also high percentage of BCFAs in their membrane lipids. Since biosynthesis of polyketide (PK) and FA partially share common pathways to generate acyl-CoA precursors, in theory, Streptomyces sp. with high levels of PK antibiotics production can be easily manipulated into strains producing high levels of BCFAs. To increase the percentage of the BCFA moieties in lipids, we redirected acyl-CoA precursor fluxes from PK into BCFAs using S. coelicolor M1146 (M1146) as a host strain. In addition, 3-ketoacyl acyl carrier protein synthase III and branched chain α-keto acid dehydrogenase were overexpressed to push fluxes of branched chain acyl-CoA precursors towards FA synthesis. The maximum titer of 354.1 mg/L BCFAs, 90.3% of the total FA moieties, was achieved using M1146dD-B, fadD deletion and bkdABC overexpression mutant of M1146 strain. Cell specific yield of 64.4 mg/L/gcell was also achieved. The production titer and specific yield are the highest ever reported in bacterial cells, which provides useful insights to develop an efficient host strain for BCFAs.

The halophilic bacterium Pseudoalteromonas phenolica is well known as a promising candidate that enables the recycling of organic wastes at high salinity. However, for industrial applications of P. phenolica further research is required to explore the biological mechanism for maximizing the activities and productivities of this bacterium. In this study, we investigated the osmotic stress resistance and specific protease activities of P. phenolica in a normal-salt medium (0.3 M NaCl) and high-salt medium (1 M NaCl) based on intra- and extracellular multi-omics approaches. Proteins related to betaine and proline biosynthesis were increased under high salt stress. The targeted metabolite analysis found that proline was overproduced and accumulated outside the cell at high salinity, and betaine was accumulated in the cell by activation of biosynthesis as well as uptake. In addition, extracellular serine proteases were shown to be upregulated in response to salt stress by the extracellular proteomic analysis. The specific proteolytic activity assay indicated that the activities of serine proteases, useful enzymes for the recycling of organic wastes, were increased remarkably under high salt stress. Our results suggest that betaine and proline are key osmoprotectant metabolites of P. phenolica, and they can be used for the improvement of protease production and P. phenolica activities for the recycling of high-salt organic wastes in the future.

Gamma-aminobutyric acid (GABA) is a non-proteinogenic amino acid act as a major neurotransmitter inhibitor in the nervous system of mammals. It also used as a precursor of bioplastics synthesis such as N-methylpyrolidone and polyamide 4. Chemical-based synthesis methods have many environmental-related issues, so efforts have been made to develop biosynthetic methods to produce GABA. Glutamate decarboxylase (GAD) transforms L-glutamate to GABA using pyridoxal 5'-phosphate (PLP) as a cofactor. Bioconversion of GABA with whole cells overexpressing the glutamate decarboxylase has advantages of fewer byproducts and rapid reaction. However, there is a bottleneck in the whole-cell bioconversion system i.e., higher GABA production require a large amount of cofactor PLP which make the process costly. Therefore, pyridoxal kinase (PdxY) able to regenerate PLP was introduced in the whole-cell system to construct a new GABA producing system. Culture and reaction conditions were optimized, and 100% conversion of 0.6 M MSG was obtained. This study reports that a competitive level of GABA production could be achieved without supplying additional PLPs.

One of the advantages of microbial synthesis of polyhydroxyalkanoates (PHAs) is the production of diverse polymers with different properties by the addition of different monomers, such as 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 3-hydroxyhexanoate (3HHx). Considering the number of possible variables, terpolymers can have more variations than copolymers. In this study, we aimed to synthesize the terpolymer P(3HB-co-3HV-co-3HHx) from volatile fatty acids such as propionate and butyrate using the recombinant Ralstonia eutropha strain (Re2133/pCB81), containing deletions in the phaB1, phaB2, and phaB3 genes, and overexpression of synthetic PHA operon (phaC2, phaA, phaJ). This strain produced terpolymers depending on the ratio of two different carbon sources, namely, propionic and butyric acids; however, wild type R. eutropha could not produce the same type of polymer. The incorporation of 3-hydroxyvalerate and 3-hydroxyhexanoate monomers was confirmed by gas chromatography and H-nuclear magnetic resonance spectroscopy, and the parameters affecting the terpolymer composition were obtained based on regression. In addition, the thermal analysis showed that this terpolymer has properties different from those of the copolymer, obtained from the same composition of volatile acids. Depending on the ratio of two volatile acids, the composition of the terpolymer can be regulated resulting in different properties.

Cadaverine, also known as 1,5-pentanediamine, is an important platform chemical with a wide range of applications and can be produced either by fermentation or bioconversion. Bioconversion of cadaverine from l -lysine is the preferred method because of its many benefits, including rapid reaction time and an easy downstream process. In our previous study, we replaced pyridoxal-5-phosphate (PLP) with pyridoxal kinase (PdxY) along with pyridoxal (PL) because it could achieve 80% conversion with 0.4 M of l -lysine in 6 h. However, conversion was sharply decreased in the presence of high concentrations of l -lysine (i.e., 1 M), resulting in less than 40% conversion after several hours. In this study, we introduced an ATP regeneration system using polyphosphate kinase (ppk) into systems containing cadaverine decarboxylase (CadA) and PdxY for a sufficient supply of PLP, which resulted in enhanced cadaverine production. In addition, to improve transport efficiency, the use of surfactants was tested. We found that membrane permeabilization via hexadecyltrimethylammonium bromide (CTAB) increased the yield of cadaverine in the presence of high concentrations of l -lysine. By combining these two strategies, the ppk system and addition of CTAB, we enhanced cadaverine production up to 100% with 1 M of l -lysine over the course of 6 h.

Naturally produced polyhydroxyalkanoates (PHAs) biopolymers have limited medical applications due to their brittle and hydrophobic nature. In this study poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) copolymer was produced using engineered Escherichia coli YJ101, and further functionalized with ascorbic acid using Candida antarctica lipase B mediated esterification. Copolymer P(3HB-co-3HV)-ascorbic acid showed lower degree of crystallinity (9.96%), higher thermal degradation temperature (294.97 °C) and hydrophilicity (68°) as compared to P(3HB-co-3HV). Further, P(3HB-co-3HV)-ascorbic acid biomaterial showed 14% scavenging effect on 1,1-diphenyl-2-picryl-hydrazyl (DPPH), and 1.6 fold increase in biodegradability as compared to P(3HB-co-3HV). Improvement of PHAs polymer properties by adding functional groups could be a good approach to increase their biodegradability, economic value and important applications in the medical field.

Serum is one of the most commonly used samples in many studies to identify protein biomarkers to diagnose cancer. Although conventional enzyme-linked immunosorbent assay (ELISA) or liquid chromatography-mass spectrometry (LC-MS)-based methods have been applied as clinical tools for diagnosing cancer, there have been troublesome problems, such as inferior multiplexing capabilities, high development costs and long turnaround times, which are inappropriate for high-throughput analytical platforms. Here, we developed a simple and robust cancer diagnostic method using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS)-based total serum protein fingerprinting. First, serum samples were simply diluted with distilled water and subsequently spotted onto a MALDI plate without prior chromatographic purification or separation. The sample preparation method was enough to collect reproducible total serum protein fingerprints and would be highly advantageous for high-throughput assay. Each of the integrated main spectrum profiles (MSPs), which are representative of liver cancer patients (n = 40) or healthy controls (n = 80), was automatically generated by the MALDI Biotyper 3 software. The reliability of the integrated MSPs was successfully evaluated in comparison with a blind test set (n = 31), which consisted of 13 liver cancer patients and 18 healthy controls. Additionally, our partial least squares discriminant analysis (PLS-DA) demonstrated a statistically significant difference in MALDI-TOF MS-based total serum protein fingerprints between liver cancer patients and healthy controls. Taken together, this work suggests that this method may be an effective high-throughput platform technology for various cancer diagnoses and disease evaluations.

In the bioproduction of glutaric acid, an emerging bioplastic monomer, α-ketoglutaric acid (α-KG) is required as an amine acceptor for 4-aminobutyrate aminotransferase (GabT)-driven conversion of 5-aminovalerate (5-AVA) to glutarate semialdehyde. Herein, instead of using expensive α-KG, an indirect α-KG supply system was developed using a relatively cheap alternative, monosodium glutamate (MSG), for l-glutamate oxidase (Gox)-based whole-cell conversion. Using 200 mM 5-AVA and 30 mM MSG initially with Gox, 67.1 mM of glutaric acid was produced. By applying the stepwise feeding strategy of MSG, the glutaric acid production capability was increased to 159.1 mM glutaric acid with a conversion yield of 79.6%. In addition, a buffer-free one-pot reaction from l-lysine was also applied in a 5 L bioreactor to evaluate its industrial applicability, resulting in a conversion yield of 54.2%. The system developed herein might have great potential for the large-scale, economically feasible production of glutaric acid by whole-cell conversion.

Methicillin-resistant Staphylococcus aureus (MRSA) is a pathogenic bacterium that causes severe diseases in humans. For decades, MRSA has acquired substantial resistance against conventional antibiotics through regulatory adaptation, thereby posing a challenge for treating MRSA infection. One of the emerging strategies to combat MRSA is the combinatory use of antibacterial agents. Based on the dramatic change in phospholipid fatty acid (PLFA) composition of MRSA in previous results, this study investigated branched-chain amino acid derivatives (precursors of fatty acid synthesis of cell membrane) and discovered the antimicrobial potency of D-norvaline. The compound, which can act synergistically with oxacillin, is among the three leucine-tRNA synthetase inhibitors with high potency to inhibit MRSA cell growth and biofilm formation. PLFA analysis and membrane properties revealed that D-norvaline decreased the overall amount of PLFA, increasing the fluidity and decreasing the hydrophobicity of the bacterial cell membrane. Additionally, we observed genetic differences to explore the response to D-norvaline. Furthermore, deletion mutants and clinically isolated MRSA strains were treated with D-norvaline. The study revealed that D-norvaline, with low concentrations of oxacillin, was effective in killing several MRSA strains. In summary, our findings provide a new combination of aminoacyl-tRNA synthetase inhibitor D-norvaline and oxacillin, which is effective against MRSA.

Caldicellulosiruptor bescii is the most thermophilic, cellulolytic bacterium known and has the native ability to utilize unpretreated plant biomass. Cellulase A (CelA) is the most abundant enzyme in the exoproteome of C. bescii and is primarily responsible for its cellulolytic ability. CelA contains a family 9 glycoside hydrolase and a family 48 glycoside hydrolase connected by linker regions and three carbohydrate-binding domains. A truncated version of the enzyme (TM1) containing only the endoglucanase domain is thermostable and actively degrades crystalline cellulose. A catalytically active TM1 was successfully produced via the attachment of the PelB signal peptide (P-TM1), which mediates post-translational secretion via the SecB-dependent translocation pathway. We sought to enhance the extracellular secretion of TM1 using an alternative pathway, the signal recognition particle (SRP)-dependent translocation pathway. The co-translational extracellular secretion of TM1 via the SRP pathway (D-TM1) resulted in a specific activity that was 4.9 times higher than that associated with P-TM1 overexpression. In batch fermentations, the recombinant Escherichia coli overexpressing D-TM1 produced 1.86 ± 0.06 U/ml of TM1 in the culture medium, showing a specific activity of 1.25 ± 0.05 U/mg cell, 2.7- and 3.7-fold higher than the corresponding values of the strain overexpressing P-TM1. We suggest that the TM1 secretion system developed in this study can be applied to enhance the capacity of E. coli as a microbial cell factory for the extracellular secretion of this as well as a variety proteins important for commercial production.

Formate is a promising environmentally friendly and sustainable feedstock synthesized from syngas or carbon dioxide. Methylorubrum extorquens is a type II methylotroph that can use formate as a carbon source. It accumulates polyhydroxyalkanoates (PHAs) inside the cell, mainly producing poly-3-hydroxybutyrate (PHB), a degradable biopolymer. Owing to its high melting point and stiff nature, however, mechanical property improvement is warranted in the form of copolymerization. To produce the PHA copolymer, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), the endogenous gene phaC was deleted and the pathway genes bktB, phaJ1, and phaC2, with broader substrate specificities, were heterologously expressed. To improve the incorporation of 3-hydroxyvalerate (3HV), the expression level of bktB was improved by untranslated region (UTR) engineering, and the endogenous gene phaA was deleted. The engineered M. extorquens produced PHBV with 8.9% 3HV using formate as the sole carbon source. In addition, when propionate and butyrate were supplemented, PHBVs with 3HV portions of up to 70.6% were produced. This study shows that a PHBV copolymer with a high proportion of 3HV can be synthesized using formate, a C1 carbon source, through metabolic engineering and supplementation with short-chain fatty acids.

Pipecolic acid, a non-proteinogenic amino acid, is a metabolite in lysine metabolism and a key chiral precursor in local anesthesia and macrolide antibiotics. To replace the environmentally unfriendly chemical production or preparation procedure of pipecolic acid, many biological synthetic routes have been studied for a long time. Among them, synthesis by lysine cyclodeaminase (LCD), encoded by pipA, has several advantages, including stability of enzyme activity and NAD+ self-regeneration. Thus, we selected this enzyme for pipecolic acid biosynthesis in a whole-cell bioconversion. To construct a robust pipecolic acid production system, we investigated important conditions including expression vector, strain, culture conditions, and other reaction parameters. The most important factor was the introduction of multiple pipA genes into the whole-cell system. As a result, we produced 724 mM pipecolic acid (72.4 % conversion), and the productivity was 0.78 g/L/h from 1 M l-lysine after 5 days. This is the highest production reported to date.

Bacteria from the genus Halomonas hold promise in biotechnology as sources of salt-tolerant enzymes, biosurfactants, biopolymers, osmolytes, and as actors in bioremediation processes. In a previous work, we have identified Halomonas socia strain CKY01 having various hydrolase activities. Here, we aimed to study the survival strategies of marine bacteria. A deep genome sequencing study of H. socia CKY01 has revealed 4627 genes reaching 4,753,299 bp with 64 % of GC content. This strain produced polyhydroxybutyrate (PHB) having one gene clusters having phaC and phasin, and it has several genes responsible for the uptake, synthesis, and transport of the osmolytes such as betaine, choline, ectoine, carnitine, and proline in the bacterial genome. The addition of 60 mM glutamate, 60 mM proline and 60 mM ectoine enhanced growth 300.8 %, 294.2 % and 235.0 %, respectively, under 10 % saline conditions. In particular, ectoine and proline increased salt resistance and allowed cells to survive in more than 15 % NaCl. By combining experimental and genome sequencing data, we have investigated the importance of osmolytes on the survival of this Halomonas strain.

Glutaric acid is one of the promising C5 platform compounds in the biochemical industry. It can be produced chemically, through the ring-opening of butyrolactone followed by hydrolysis. Alternatively, glutaric acid can be produced via lysine degradation pathways by microorganisms. In microorganisms, the overexpression of enzymes involved in this pathway from E. coli and C. glutamicum has resulted in high accumulation of 5-aminovaleric acid. However, the conversion from 5-aminovaleric acid to glutaric acid has resulted in a relatively low conversion yield for unknown reasons. In this study, as a solution to improve the production of glutaric acid, we introduced gabTD genes from B. subtilis to E. coli for a whole cell biocatalytic approach. This approach enabled us to determine the effect of co-factors on reaction and to achieve a high conversion yield from 5-aminovaleric acid at the optimized reaction condition. Optimization of whole cell reaction by different plasmids, pH, temperature, substrate concentration, and cofactor concentration achieved full conversion with 100 mM of 5-aminovaleric acid to glutaric acid. Nicotinamide adenine dinucleotide phosphate (NAD(P)+) and α-ketoglutaric acid were found to be critical factors in the enhancement of conversion in selected conditions. Whole cell reaction with a higher concentration of substrates gave 141 mM of glutaric acid from 300 mM 5-aminovaleric acid, 150 mM α-ketoglutaric acid, and 60 mM NAD+ at 30 °C, with a pH of 8.5 within 24 h (47.1% and 94.2% of conversion based on 5-aminovaleric acid and α-ketoglutaric acid, respectively). The whole cell biocatalyst was recycled 5 times with the addition of substrates; this enabled the accumulation of extra glutaric acid.

Cadaverine is used for the synthesis of the novel bio-polyamides 54, 56, and 510. Here, we examine the feasibility of using a lysine decarboxylase (LdcC) from Escherichia coli for high-level production of cadaverine. After sequential optimization of whole-cell biotransformation conditions, recombinant E. coli-overexpressing LdcC (EcLdcC) could produce 1.0 M cadaverine from 1.2 M crude L-lysine solution after 9 h. EcLdcC retained a higher cadaverine yield after being reused 10 times at acidic and alkaline pH values than that of a recombinant E. coli strain overexpressing an inducible lysine decarboxylase (CadA), a conventional cadaverine producer (90 vs. 51% at pH 6 and 55 vs. 15% at pH 8). This study reveals that EcLdcC is a promising whole-cell biocatalyst for the bio-based production of cadaverine from industrial grade L-lysine in comparison to EcCadA.

Biomass is normally processed using acidic or basic catalysts, which both have their drawbacks. One suitable alternative is the application of hydrolytic enzymes that can convert biomass into simpler molecules, which can be fermented and processed into biofuel. Hydrolytic enzymes include proteases, lipases, amylases, cellulases, mannanases, chitinases, and xylanases. To discover sources of these enzymes, 19 halophilic strains of microorganisms that are significantly resistant to high salt concentrations were analyzed. The objective of this research was to identify halophilic microorganisms that produce the target enzymes with high activities, and to characterize these enzymes according to their salt tolerances. The results obtained indicated that Pseudolateromonas phenolica, Micrococcus luteus, Pseudoalteromonas peptidolytica, Halomonas socia, Marinobacter maritimus, and Exiguobacterium aurantiacum strain 2 produced the highest protease, lipase, amylase, cellulase, mannanase, chitinase, and xylanase relative activities, respectively. Except for protease from P. phenolica, all the enzymes tested for salt resistance either maintained or increased their activities with increasing NaCl concentration.

Streptomyces, which produces many pharmaceutical antibiotics and anticancer agents, is a genus of soil-dwelling bacteria with numerous regulators that control both primary and secondary metabolism. NdgR is highly conserved in Streptomyces spp. and is known to be involved in antibiotic production, tolerance against shock and physical stress, nitrogen metabolism, leucine metabolism, and N-acetylglucosamine metabolism. As another function of NdgR, we report the involvement of NdgR in glycerol metabolism in S. coelicolor. Initially, a glycerol utilization operon containing gylCABX was found to be up-regulated in an ndgR deletion mutant (BG11) grown in N-acetylglucosamine solid minimal media compared with wild-type strain (M145). BG11 produced more antibiotics with a small amount of glycerol and increased glycerol utilization, yielding higher concentrations of lactate and acetate per cell. Moreover, fatty acid production was also changed in BG11 to produce longer chain fatty acids, phenolic compounds, alkanes, and fatty alcohols. Using a gel retardation assay, NdgR was found to bind the upstream region of gylC, working as a repressor. NdgR is a second regulator of a glycerol utilization operon, for which only one regulator, GylR was previously known.

Cytochrome P450 monooxygenases (CYP) are a superfamily of heme-thiolate proteins which catalyze the incorporation of oxygen atoms into substrates. Here, a self-sufficient CYP102A from Streptomyces cattleya (CYP102A_scat) was cloned, produced recombinantly in Escherichia coli strain BL21 (DE3), and the characteristic features were investigated. However, unlike other self-sufficient CYP102A enzymes that have been reported, CYP102A_scat was found to be able to catalyze intracellular hydroxylation of indole molecules with 3-C specific regioselectivity. Consequently, E. coli strains producing CYP102A_scat could synthesize approximately 1.0 g/L of indigo in LB media. Optimization of indigo synthesis was investigated through additional feeding of indole precursors such as glucose, l -tryptophan, and indole. Indigo production reached up to 3.8 ± 0.1 g/L by adding 20 μM of extracellular indole and 0.2 mM of l -tryptophan to the LB media. To our knowledge, this is a record and the highest yield achieved so far.

Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620 was found to produce a distinctive medium-chain-length polyhydroxyalkanoate (MCL-PHA) copolymer when grown on structurally unrelated carbon sources including glycerol. The maximum MCL-PHA copolymer yield was obtained about 52.18±4.12% from 7.95±0.66g/L of biomass at 144h of fermentation when 3% glycerol was used as sole carbon and energy source during the laboratory-scale bioreactor process. Characterization of the copolymer was carried out using fourier transform infrared spectroscopy (FTIR), gas chromatography-mass spectrometry (GC-MS), proton (1H) and carbon (13C) nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), differential scanning calorimeter (DSC) and thermo-gravimetric analysis (TGA). The copolymer produced by Pseudomonas sp. PAMC 28620 consisting of four PHA monomers and identified as 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD) and 3-hydroxytetradecanoate (3HTD). An average molecular weight of the copolymer was found approximately 30.244kDa with polydispersity index (PDI) value of 2.05. Thermal analysis showed the produced MCL-PHA copolymer to be low-crystalline (43.73%) polymer with great thermal stability, having the thermal decomposition temperature of 230°C-280°C, endothermic melting temperature (Tm) of 172.84°C, glass transition (Tg) temperature of 3.99°C, and apparent melting enthalpy fusion (ΔHm) about 63.85Jg-1.

Prostaglandins (PGs) are lipid mediators that may play important roles in cancer, immunomodulation, and neurodegeneration. So, the quantitative analysis of PGs will therefore be important in order to understand the natural history of a range of diseases and may be used as a tool in the development of new biotherapeutics. However, such an analysis is problematic because of the small quantities of PGs present in the body. Here, we developed a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS)-based analytical method for rapid and easy quantification of the ketone-containing PGs (15d-PGJ2 etc.) as a targeted metabolomics platform. The chemical derivatization with Girard’s reagent P (GP) provided a good linearity (R2 > 0.99) between peak area and quantity of 15d-PGJ2 and highly improved sensitivity (limit of quantitation, LOQ: 1.25 pmol on a spot in MALDI plate). Finally, we utilized this method to directly characterize the interaction between peroxisome proliferatoractivated receptor gamma-ligand binding domain (PPARγ-LBD) and 15d-PGJ2. The 15d-PGJ2 was enriched by PPARγ-LBD and also the binding level of the ligand was dropped considerably by the treatment of PPARγ agonist such as rosiglitazone (about 0.61-fold reduction). Taken together, our MALDI-MS-based targeted metabolomics method for ketone-containing PGs may be applicable to elucidate the protein-metabolite interactions and to identify natural ligands for drug candidates.

Polyhydroxyalkanoates (PHA), such as poly (3-hydroxybutyrate) (PHB), have emerged as potential alternatives to petroleum-based plastics and can be produced through the appropriate selection of marine bacteria that are already adapted to high salt and low temperature conditions without the requirement of antibiotic treatment. The present study, thus, aimed to screen and characterize thirteen PHA-producing microbial strains isolated from the Gwangalli beach in Busan, South Korea. Among them, Halomonas sp. YLGW01 produced the highest amount of PHB (94.6 ± 1.8% (w/w)) using fructose. Interestingly Halomonas sp. YLGW01 showed increase in cell size (8.39 ± 3.63 μm) with fructose as carbon source as compared to glucose (2.34 ± 0.44 μm). Fructose syrup was investigated as carbon source under unsterilized conditions and 95.26 ± 1.78% of PHB was produced. Overall, this strain showed the highest PHB contents in halotolerant bacteria.

Bacteria have evolved a defense system to resist external stressors, such as heat, pH, and salt, so as to facilitate survival in changing or harsh environments. However, the specific mechanisms by which bacteria respond to such environmental changes are not completely elucidated. Here, we used halotolerant bacteria as a model to understand the mechanism conferring high tolerance to NaCl. We screened for genes related to halotolerance in Halomonas socia, which can provide guidance for practical application. Phospholipid fatty acid analysis showed that H. socia cultured under high osmotic pressure produced a high portion of cyclopropane fatty acid derivatives, encoded by the cyclopropane-fatty acid-acyl phospholipid synthase gene (cfa). Therefore, H. socia cfa was cloned and introduced into Escherichia coli for expression. The cfa-overexpressing E. coli strain showed better growth, compared with the control strain under normal cultivation condition as well as under osmotic pressure (> 3% salinity). Moreover, the cfa-overexpressing E. coli strain showed 1.58-, 1.78-, 3.3-, and 2.19-fold higher growth than the control strain in the presence of the inhibitors furfural, 4-hydroxybenzaldehyde, vanillin, and acetate from lignocellulosic biomass pretreatment, respectively. From a practical application perspective, cfa was co-expressed in E. coli with the polyhydroxyalkanoate (PHA) synthetic operon of Ralstonia eutropha using synthetic and biosugar media, resulting in a 1.5-fold higher in PHA production than that of the control strain. Overall, this study demonstrates the potential of the cfa gene to boost cell growth and production even in heterologous strains under stress conditions.

Polyhydroxyalkanoate (PHA) is a potential substitute for petroleum-based plastics and can be produced by many microorganisms, including recombinant Escherichia coli. For efficient conversion of substrates and maximum PHA production, we performed multiple engineering of branched pathways in E. coli. We deleted four genes (pflb, ldhA, adhE, and fnr), which contributed to the formation of byproducts, using the CRISPR/Cas9 system and overexpressed pntAB, which catalyzes the interconversion of NADH and NADPH. The constructed strain, HR002, showed accumulation of acetyl-CoA and decreased levels of byproducts, resulting in dramatic increases in cell growth and PHA content. Thus, we demonstrated the effects of multiple engineering for redirecting carbon flux into PHA production without any concerns regarding simultaneous deletion.

Ralstonia eutropha Re2133/pCB81 is able to utilize various volatile fatty acids (VFAs) (acetate, butyrate, lactate, and propionate) for polyhydroxyalkanoates (PHAs) production. Acetate and lactate resulted in poly(3-hydroxybutyrate) P(3HB) production, butyrate in poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) P(3HB-co-3HHx), and propionate in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3-HB-co-3HV). Various biomass yields i.e. (Yx/s, 0.131 ± 0.02 g/g acetate, 0.221 ± 0.02 g/g butyrate, 0.222 ± 0.05 g/g lactate, and 0.225 ± 0.04 g/g propionate) and PHA yields (Yp/s, 0.01 ± 0.001 g/g acetate, 0.11 ± 0.004 g/g butyrate, 0.03 ± 0.001 g/g lactate, and 0.18 ± 0.005 g/g propionate) were observed with the different organic acids. When all the organic acids were mixed together R. eutropha Re2133/pCB81 had the following order of preference; lactate > butyrate > propionate > acetate. A response surface design study showed that in mixtures butyrate is the main organic acid involved in PHA production and acts as a precursor for HHx monomer units to produce copolymer P(3HB-co-3HHx). Food waste ferment (FWF) without any additional nitrogen source and precursors resulted in P(3HB-co-3HHx) accumulation (52 ± 4% w/w with 18.5 ± 3% HHx fraction).

Glutaric acid is an attractive C5 dicarboxylic acid with wide applications in the biochemical industry. Glutaric acid can be produced by fermentation and bioconversion, and several of its biosynthesis pathways have been well characterized, especially the simple pathway involving glutaric acid from l-lysine using 5-aminovaleric acid. We previously reported the production of glutaric acid using 5-aminovaleric acid and α-ketoglutaric acid by a whole-cell reaction, resulting in a high conversion yield. In this study, we sought to enhance the stability and reusability of this whole-cell system for realizing the efficient production of glutaric acid under harsh reaction conditions. To this end, various matrices were screened to immobilize Escherichia coli whole-cell overexpressing 4-aminobutyrate aminotransferase (GabT), succinate semi-aldehyde dehydrogenase (GabD), and NAD(P)H oxidase (NOX). We ultimately selected a PVA-PEG gel (LentiKats®) for cell entrapment, and several factors of the reaction were optimized. The optimal temperature and pH were 35 °C and 8.5, respectively. Treatment with Tween 80 as a surfactant, as well as additional NOX, was found to be effective. Under the optimized conditions, an immobilized cell retained 55% of its initial activity even after the eighth cycle, achieving 995.2 mM accumulated glutaric acid, whereas free cell lost most of their activity after only two cycles. This optimized whole-cell system can be used in the large-scale production of glutaric acid.

Cadaverine is a useful chemical that can be produced by lysine decarboxylase up to molar concentration levels. To develop a convenient and reusable production process, we performed intracellular immobilization of lysine decarboxylase (CadA) using poly(3-hydroxybutyrate) (P(3HB)) and PhaP1 (P(3HB) granule-associated protein) from Ralstonia eutropha . By adding 591 bp of the entire phaP1 gene sequence to the 3′ end of the cadA gene, CadA was successfully fused to PhaP1. The phasin-fused CadA bound to the intracellular P(3HB) granules, which enabled the reuse of CadA in repetitive enzyme reactions. Although immobilization of the CadA–P(3HB) complex was not effective over extended temperature and pH ranges, the immobilized CadA exhibited increased thermal stability, with a half-life of 70 h at 50 °C. The CadA–P(3HB) complex achieved a 75–80% conversion yield over five reaction cycles without laborious immobilization steps. This study indicates the feasibility of in situ immobilization of lysine decarboxylase by phasin fusion.

DESs (deep eutectic solvents) have many potential applications as cosolvents or anhydrous reaction media for biocatalytic reactions, owing to their non-volatility, non-flammability, non-toxicity, biocompatibility, biodegradability, and low cost. In this work, choline chloride ([Ch]Cl)-based DESs and DES mixtures containing two hydrogen bond donors were used as cosolvents to enhance the activity and stability of Candida rugosa lipase in aqueous reactions. The activity of lipase in an aqueous solution of [Ch]Cl:urea:glycerol was 155% higher than that in buffer. The half-life time of lipase at 40 °C in an aqueous solution of [Ch]Cl:glycerol was enhanced by 9.2 times. The lipase showed the highest acid stability and base stability in the aqueous solutions of [Ch]Cl:glycerol:thiourea and [Ch]Cl:ethylene glycol:formamide, respectively. In general, glycerol-containing DES mixtures were very useful in enhancing the activity and stability of lipase, while formamide-containing DES mixtures could not efficiently enhance the activity and stability of lipase. To understand the effect of DES mixtures on the activity and stability of lipase in aqueous solution, four solvatochromic parameters of DES mixtures were determined. When the solvatochromic parameters of DES mixtures were correlated with the stability of lipase in aqueous solutions of DES mixtures, it was found that thermal stability and storage stability of lipase were associated with the hydrogen bond acidity of DES mixtures. Acid stability and base stability of lipase were correlated with polarity based on Reichardt’s dye and the dipolarity/polarizability of DES mixtures, respectively.