Search

Sudangrass, Sorghum sudanense (Piper) Stapf, is a vigorous forage crop that has also been used for biogas, paper, and electricity production. Due to the large biomass yields achieved by sudangrass and the large area of potential growth in Argentina seven sudangrass accessions from a collection of S. sudanense were analyzed to evaluate their potential as feedstocks for lignocellulosic bioethanol production, and to assess whether there is an association between the response to biotic and abiotic stresses and the composition of the biomass. The biomass composition was analyzed for major cell wall polymers, monosaccharides, and elemental composition. On average, 68% of stem lignocellulosic biomass was comprised of matrix polysaccharides and crystalline cellulose, representing a potential source of sugars for bioethanol production. Xylose was the predominant matrix polysaccharide monosaccharide comprising, on average, 45% of the total sugars, followed by arabinose, glucose, galactose, galacturonic acid, mannose, glucuronic acid, and fucose. Rhamnose was not detected in any of the biomasses analyzed. Silica was the most abundant element in sudangrass stem, followed by chloride, calcium, phosphorus and sulfur. We performed saccharification analyses after pretreatments. Alkaline pretreatment was more effective than water pretreatment. Sodium hydroxide pretreatment exposed different levels of recalcitrance among sudangrass accessions, whereas the water pretreatment did not. Phenological traits were also evaluated, showing significant variability among accessions. The comparison of major cell wall polymers and monosaccharide composition between tolerant and susceptible accessions to abiotic and biotic stresses suggests an association between the composition of the biomass and the response to stress., Competing Interests: The authors have declared that no competing interests exist.

The global production of cereal straw as an agricultural by-product presents a significant source of biomass, which could be used as feedstock for the production of second generation biofuels by fermentation. The production of sugars for fermentation is an important measure of straw quality and in its suitability for biofuel production. In this paper, we present a characterization of straw digestibility from a wide range of cereal. Our main objective is to evaluate the variability of fermentable sugars released from different species including wheat (Triticum durum L., Triticum aestivum L.), barley (Hordeum vulgare L.) and triticale (X Triticosecale Wittmack). To this end, we adapted a saccharification method (IAS Method) capable of detecting significant differences of released sugars between cultivars and species, while using separately another method that would serve as a control and with which we could contrast our results (CNAP method). ANOVA analyses revealed that barley has a higher saccharification potential than wheat and triticale and shows more variation between genotypes. Thus, populations derived from crosses among them such as Steptoe × Morex and OWB Dominant × OWB Recessive hold potential for the identification of genetic basis for saccharification-related traits. The correlation of glucose released between the two methods was moderate (R2 = 0.57). An evaluation of the inter- and intra- specific correlation between a number of chemical and agronomical parameters and saccharification suggests that the cell wall thickness and lignin content in straw could be used in breeding programs for the improvement of the saccharification potential. Finally, the lack of correlation between grain yield and saccharification suggests that it would be possible to make a selection of genotypes for dual purpose, low recalcitrance and grain yield., Competing Interests: The authors have declared that no competing interests exist.

Background: Miscanthus sinensis is a high yielding perennial grass species with great potential as a bioenergy feedstock. One of the challenges that currently impedes commercial cellulosic biofuel production is the technical difficulty to efficiently convert lignocellulosic biomass into biofuel. The development of feedstocks with better biomass quality will improve conversion efficiency and the sustainability of the value-chain. Progress in the genetic improvement of biomass quality may be substantially expedited by the development of genetic markers associated to quality traits, which can be used in a marker-assisted selection program., Results: To this end, a mapping population was developed by crossing two parents of contrasting cell wall composition. The performance of 182 F1 offspring individuals along with the parents was evaluated in a field trial with a randomized block design with three replicates. Plants were phenotyped for cell wall composition and conversion efficiency characters in the second and third growth season after establishment. A new SNP-based genetic map for M. sinensis was built using a genotyping-by-sequencing (GBS) approach, which resulted in 464 short-sequence uniparental markers that formed 16 linkage groups in the male map and 17 linkage groups in the female map. A total of 86 QTLs for a variety of biomass quality characteristics were identified, 20 of which were detected in both growth seasons. Twenty QTLs were directly associated to different conversion efficiency characters. Marker sequences were aligned to the sorghum reference genome to facilitate cross-species comparisons. Analyses revealed that for some traits previously identified QTLs in sorghum occurred in homologous regions on the same chromosome., Conclusion: In this work we report for the first time the genetic mapping of cell wall composition and bioconversion traits in the bioenergy crop miscanthus. These results are a first step towards the development of marker-assisted selection programs in miscanthus to improve biomass quality and facilitate its use as feedstock for biofuel production.

The aim of producing sustainable liquid biofuels and chemicals from lignocellulosic biomass remains high on the sustainability agenda, but is challenged by the costs of producing fermentable sugars from these materials. Sugars from plant biomass can be fermented to alcohols or even alkanes, creating a liquid fuel in which carbon released on combustion is balanced by its photosynthetic capture. Large amounts of sugar are present in the woody, nonfood parts of crops and could be used for fuel production without compromising global food security. However, the sugar in woody biomass is locked up in the complex and recalcitrant lignocellulosic plant cell wall, making it difficult and expensive to extract. In this paper, we review what is known about the major polymeric components of woody plant biomass, with an emphasis on the molecular interactions that contribute to its recalcitrance to enzymatic digestion. In addition, we review the extensive research that has been carried out in order to understand and reduce lignocellulose recalcitrance and enable more cost-effective production of fuel from woody plant biomass., (© 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.)

The recalcitrance of the cell wall to enzymatic hydrolysis represents one of the greatest challenges for using biomass to replace the petroleum as a feedstock for fuels and chemicals. Cell walls are complex in architecture and composition, posing a biochemical challenge for the development of efficient enzymes to release the sugars from the polysaccharide components. The complex composition of the polymers that constitute the cell wall requires a mixture of enzymes to hydrolyze the different glycosidic bonds present in biomass. The improvement of the properties of biomass, in turn, requires the screening of large populations of plants in order to identify markers associated with saccharification potential or pinpoint the genes that regulate recalcitrance. The improvement of both, enzymes and biomass together, requires the capacity to deal with large numbers of variables in a combinatorial approach. We have developed a high-throughput system that allows the determination of cellulolytic activity in a 96-well plate format by automatically handling biomass materials, carrying out hydrolytic reactions, and determining the release of reducing sugars. This platform consists of a purpose-made robot that grinds, formats, and dispenses precise amounts of solids into 96-well plates, and a liquid-handling station specifically designed to carry out pretreatments, hydrolysis, and the determination of released reducing sugar equivalents using a colorimetric assay. These modules can be used individually or in combination according to the function needed. Here we show some examples of the capabilities of the platforms in terms of enzyme and biomass evaluation, as well as combining the robot with off-line analytical tools., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Domination of the global biosphere by human beings is unprecedented in the history of the planet, and our impact is such that substantive changes in ecosystems, and the global environment as a whole, are now becoming apparent. Our activity drives the steady increase in global temperature observed in recent decades. The realization of the adverse effects of greenhouse gas emissions on the environment, together with declining petroleum reserves, has ensured that the quest for sustainable and environmentally benign sources of energy for our industrial economies and consumer societies has become urgent in recent years. Consequently, there is renewed interest in the production and use of fuels from plants. The 'first-generation' biofuels made from starch and sugar appear unsustainable because of the potential stress that their production places on food commodities. Second-generation biofuels, produced from cheap and abundant plant biomass, are seen as the most attractive solution to this problem, but a number of technical hurdles must be overcome before their potential is realized. This review will focus on the underpinning research necessary to enable the cost-effective production of liquid fuels from plant biomass, with a particular focus on aspects related to plant cell walls and their bioconversion.

Sugarcane (Saccharum spp.) is a genetically complex crop with great potential for the second-generation (2 G) ethanol industry. Despite this, there is scarce knowledge of the variability of bagasse cell-wall components and its association with agronomic traits that could be used in the selection of cultivars with improved bagasse digestibility. In this work, the acid detergent fiber method was used to determine cellulose, hemicellulose, and acid detergent lignin (ADL) in a sugarcane progeny from crossing two commercial cultivars, and in two energy-cane biotypes. Additionally, acetyl bromide-soluble lignin was determined and compared with ADL values. Despite the crossed parents showing similar bagasse composition, transgressive inheritance observed in the progeny for all bagasse cell-wall components underlines the possibility of improving sugarcane for specific bioenergetic uses. Additionally, the low association between cell-wall and yield components found in this work, suggests that indirect selection of cell-wall components for 2 G ethanol industry through agronomic traits would have a limited impact on improving the biomass composition. [ABSTRACT FROM AUTHOR]

Summary: The recalcitrance of secondary plant cell walls to digestion constrains biomass use for the production of sustainable bioproducts and for animal feed. We screened a population of Brachypodium recombinant inbred lines (RILs) for cell wall digestibility using commercial cellulases and detected a quantitative trait locus (QTL) associated with this trait. Examination of the chromosomal region associated with this QTL revealed a candidate gene that encodes a putative glycosyl transferase family (GT) 43 protein, orthologue of IRX14 in Arabidopsis, and hence predicted to be involved in the biosynthesis of xylan. Arabinoxylans form the major matrix polysaccharides in cell walls of grasses, such as Brachypodium. The parental lines of the RIL population carry alternative nonsynonymous polymorphisms in the BdGT43A gene, which were inherited in the RIL progeny in a manner compatible with a causative role in the variation in straw digestibility. In order to validate the implied role of our candidate gene in affecting straw digestibility, we used RNA interference to lower the expression levels of the BdGT43A gene in Brachypodium. The biomass of the silenced lines showed higher digestibility supporting a causative role of the BdGT43A gene, suggesting that it might form a good target for improving straw digestibility in crops. [ABSTRACT FROM AUTHOR]

Background: Cell wall resistance represents the main barrier for the production of second generation biofuels. The deconstruction of lignocellulose can provide sugars for the production of fuels or other industrial products through fermentation. Understanding the biochemical basis of the recalcitrance of cell walls to digestion will allow development of more effective and cost efficient ways to produce sugars from biomass. One approach is to identify plant genes that play a role in biomass recalcitrance, using association genetics. Such an approach requires a robust and reliable high throughput (HT) assay for biomass digestibility, which can be used to screen the large numbers of samples involved in such studies. Results: We developed a HT saccharification assay based on a robotic platform that can carry out in a 96-well plate format the enzymatic digestion and quantification of the released sugars. The handling of the biomass powder for weighing and formatting into 96 wells is performed by a robotic station, where the plant material is ground, delivered to the desired well in the plates and weighed with a precision of 0.1 mg. Once the plates are loaded, an automated liquid handling platform delivers an optional mild pretreatment (< 100°C) followed by enzymatic hydrolysis of the biomass. Aliquots from the hydrolysis are then analyzed for the release of reducing sugar equivalents. The same platform can be used for the comparative evaluation of different enzymes and enzyme cocktails. The sensitivity and reliability of the platform was evaluated by measuring the saccharification of stems from lignin modified tobacco plants, and the results of automated and manual analyses compared. Conclusions: The automated assay systems are sensitive, robust and reliable. The system can reliably detect differences in the saccharification of plant tissues, and is able to process large number of samples with a minimum amount of human intervention. The automated system uncovered significant increases in the digestibility of certain lignin modified lines in a manner compatible with known effects of lignin modification on cell wall properties. We conclude that this automated assay platform is of sufficient sensitivity and reliability to undertake the screening of the large populations of plants necessary for mutant identification and genetic association studies. [ABSTRACT FROM AUTHOR]

Background: Pretreatments are one of the main bottlenecks for the lignocellulose conversion process and the search for cheaper and effective pretreatment methodologies for each biomass is a complex but fundamental task. Here, we used a 2ν5−1 fractional factorial design (FFD) to optimize five pretreatment variables: milling time, temperature, double treatment, chemical concentration, and pretreatment time in acid–alkali (EA) and acid–organosolv (EO) pretreatments, applied to elephant grass leaves. Results: FFD allowed optimization of the pretreatment conditions using a reduced number of experiments and allowed the identification of secondary interactions between the factors. FFD showed that the temperature can be kept at its lower level and that the first acid step can be eliminated in both pretreatments, without significant losses to enzymatic hydrolysis. EA resulted in the highest release of reducing sugars (maximum of 205 mg/g substrate in comparison to 152 mg/g in EO and 40 mg/g in the untreated sample), using the following conditions in the alkali step: [NaOH] = 4.5% w/v; 85 °C and 100 min after ball milling the sample. The factors statistically significant ( P < 0.05) in EA pretreatment were NaOH concentration, which contributes to improved hydrolysis by lignin and silica removal, and the milling time, which has a mechanical effect. For EO samples, the statistically significant factors to improved hydrolysis were ethanol and catalyst concentrations, which are both correlated to higher cellulose amounts in the pretreated substrates. The catalyst is also correlated to lignin removal. The detailed characterization of the main hemicellulosic sugars in the solids after pretreatments revealed their distinct recalcitrance: glucose was typically more recalcitrant than xylose and arabinose, which could be almost completely removed under specific pretreatments. In EA samples, the removal of hemicellulose derivatives was very dependent on the acid step, especially arabinose removal. Conclusion: The results presented herewith contribute to the development of more efficient and viable pretreatments to produce cellulosic ethanol from grass biomasses, saving time, costs and energy. They also facilitate the design of enzymatic cocktails and a more appropriate use of the sugars contained in the pretreatment liquors, by establishing the key recalcitrant polymers in the solids resulting from each processing step. [ABSTRACT FROM AUTHOR]

Lignocellulose forms the structural framework of woody plant biomass and represents the most abundant carbon source in the biosphere. Turnover of woody biomass is a critical component of the global carbon cycle, and the enzymes involved are of increasing industrial importance as industry moves away from fossil fuels to renewable carbon resources. Shipworms are marine bivalve molluscs that digest wood and play a key role in global carbon cycling by processing plant biomass in the oceans. Previous studies suggest that wood digestion in shipworms is dominated by enzymes produced by endosymbiotic bacteria found in the animal’s gills, while little is known about the identity and function of endogenous enzymes produced by shipworms. Using a combination of meta-transcriptomic, proteomic, imaging and biochemical analyses, we reveal a complex digestive system dominated by uncharacterized enzymes that are secreted by a specialized digestive gland and that accumulate in the cecum, where wood digestion occurs. Using a combination of transcriptomics, proteomics, and microscopy, we show that the digestive proteome of the shipworm Lyrodus pedicellatus is mostly composed of enzymes produced by the animal itself, with a small but significant contribution from symbiotic bacteria. The digestive proteome is dominated by a novel 300 kDa multi-domain glycoside hydrolase that functions in the hydrolysis of β-1,4-glucans, the most abundant polymers in wood. These studies allow an unprecedented level of insight into an unusual and ecologically important process for wood recycling in the marine environment, and open up new biotechnological opportunities in the mobilization of sugars from lignocellulosic biomass. [ABSTRACT FROM AUTHOR]

• Simultaneous optimisation of pretreatment and saccharification using design tool. • High-resolution Design of Experiments maximizes sugar release in sugarcane bagasse. • Fractional Factorial Design was combined with a Central Composite Orthogonal design. • Design of Experiments monitored by compositional analysis of biomass. To maximize the sugar release from sugarcane bagasse, a high-resolution Fractional Factorial Design (FFD) was combined with a Central Composite Orthogonal (CCO) design to simultaneously evaluate a wide range of variables for alkaline pretreatment (NaOH: 0.1–1 mol/L, temperature: 100–220 °C, and time: 20–80 min) and enzymatic saccharification (enzyme loading: 2.5–17.5%, and reaction volume: 550–850 µL). A total of 46 experimental conditions were evaluated and the maximum sugar yield (423 mg/g) was obtained after 18 h enzymatic hydrolysis under optimized conditions (0.25 mol/L NaOH at 202 °C for 40 min, with 12.5% of enzyme loading). Biomass compositional analyses showed that the pretreatments strongly removed lignin (up to 70%), silica (up to 80%) and promoted cellulose enrichment (25–110%). This robust design of experiments resulted in maximizing enzymatic hydrolysis efficiency of sugarcane bagasse and further indicated that this combined approach is versatile for other lignocellulosic biomasses. [ABSTRACT FROM AUTHOR]