Search

This study aimed to 1) identify what starting block outcome kinetics have the greatest relationship to 15 m start time; 2) investigate key mechanistic determinants of the block phase and how these forces are sequenced. One hundred and fifty-two high-level competitive swimmers were included in the study. Linear mixed modelling identified four on-block outcome kinetic variables (work, average power, horizontal take-off velocity (HTOV), and average acceleration) as having a very large relationship (R2 = 0.79–0.83) to 15 m start time, with average power having the most substantial impact. On-block force sequencing started with the rear leg, followed by upper limb grab forces and the front leg. Further exploration of underlying determinants was performed for average power and HTOV of the centre of mass. Multiple linear regression identified grab resultant peak force, rear resultant average force, front horizontal peak force, and resultant peak force as significant predictors of average power (R2 = 0.88). HTOV was predicted using the same variables, apart from the inclusion of rear horizontal peak force instead of rear resultant average force (R2 = 0.73). These findings may influence how strength and conditioning and skill acquisition interventions are designed to improve swim start performance. [ABSTRACT FROM AUTHOR]

An editorial is presented on leveraging game-based activities to enhance learning in biomechanics education, tackling challenges of anxiety and dropout rates in Science, Technology, Engineering, and Mathematics (STEM) majors, especially in kinesiology and sports science fields. It discusses the active learning approaches, the potential of game-based learning activities to improve engagement, and recommendations for implementing gamification strategies in university-level biomechanics courses.

Background: The atlas stone lift is a popular strongman exercise where athletes are required to pick up a large, spherical, concrete stone and pass it over a bar or place it on to a ledge. The aim of this study was to use ecologically realistic training loads and set formats to (1) establish the preliminary biomechanical characteristics of athletes performing the atlas stone lift; (2) identify any biomechanical differences between male and female athletes performing the atlas stone lift; and (3) determine temporal and kinematic differences between repetitions of a set of atlas stones of incremental mass. Methods: Kinematic measures of hip, knee and ankle joint angle, and temporal measures of phase and repetition duration were collected whilst 20 experienced strongman athletes (female: n = 8, male: n = 12) performed three sets of four stone lifts of incremental mass (up to 85% one repetition maximum) over a fixed-height bar. Results: The atlas stone lift was categorised in to five phases: the recovery, initial grip, first pull, lap and second pull phase. The atlas stone lift could be biomechanically characterised by maximal hip and moderate knee flexion and ankle dorsiflexion at the beginning of the first pull; moderate hip and knee flexion and moderate ankle plantarflexion at the beginning of the lap phase; moderate hip and maximal knee flexion and ankle dorsiflexion at the beginning of the second pull phase; and maximal hip, knee extension and ankle plantarflexion at lift completion. When compared with male athletes, female athletes most notably exhibited: greater hip flexion at the beginning of the first pull, lap and second pull phase and at lift completion; and a shorter second pull phase duration. Independent of sex, first pull and lap phase hip and ankle range of motion (ROM) were generally smaller in repetition one than the final three repetitions, while phase and total repetition duration increased throughout the set. Two-way interactions between sex and repetition were identified. Male athletes displayed smaller hip ROM during the second pull phase of the first three repetitions when compared with the final repetition and smaller hip extension at lift completion during the first two repetitions when compared with the final two repetitions. Female athletes did not display these between-repetition differences. Conclusions: Some of the between-sex biomechanical differences observed were suggested to be the result of between-sex anthropometric differences. Between-repetition differences observed may be attributed to the increase in stone mass and acute fatigue. The biomechanical characteristics of the atlas stone lift shared similarities with the previously researched Romanian deadlift and front squat. Strongman athletes, coaches and strength and conditioning coaches are recommended to take advantage of these similarities to achieve greater training adaptations and thus performance in the atlas stone lift and its similar movements. [ABSTRACT FROM AUTHOR]

The original article [1] contained an error whereby the symbol '☼' originally included in and below Tables 2–5 did not display properly. [ABSTRACT FROM AUTHOR]

As the sport of strongman is becoming increasingly popular, and such exercises are being commonly used by strength and conditioning coaches for a wide range of athletic groups, a greater understanding of the biomechanics of strongman exercises is warranted. To improve the quality of research, this systematic review summarised the research methodology used in biomechanical studies of strongman exercises and identified potential improvements to current approaches. A search of 5 databases found 10 articles adherent to the pre-defined inclusion criteria. The studies assessed 8 strongman exercises and included male participants of relatively similar body mass but varying training backgrounds. Due to the complexity of strongman exercises and the challenges in collecting advanced biomechanical data in the field, most studies used simplified measurement/analysis methods (e.g., 2D motion capture). Future strongman biomechanical studies should: assess under/un-researched strongman exercises; include a greater number of experienced and female strongman athletes; utilise more advanced (e.g., 3D motion capture and/or inertial sensor) technology so to provide a broader range and greater quality of data. Such approaches will provide strength and conditioning coaches, strongman coaches and athletes with a greater understanding of strongman exercises, thereby further improving exercise prescription, athlete performance and minimising risk of injury. [ABSTRACT FROM AUTHOR]

Background. A review of the literature has indicated that lower body stiffness, defined as the extent to which the lower extremity joints resists deformation upon contact with the ground, may be a useful measure for assessing Achilles injury risk in triathletes. The nature of overuse injuries suggests that a variety of different movement patterns could conceivably contribute to the final injury outcome, any number and combination of which might be observed in a single individual. Measurements which incorporate both kinetics and kinematics (such as stiffness) of a movement may be better able to shed light on individuals at risk of injury, with further analysis then providing the exact mechanism of injury for the individual. Stiffness can be measured as vertical, leg or joint stiffness to model how the individual interacts with the environment upon landing. However, several issues with stiffness assessments limit the effectiveness of these measures to monitor athletes' performance and/or injury risk. This may reflect the variety of common biomechanical stiffness calculations (dynamic, time, true leg and joint) that have been used to examine these three stiffness levels (vertical, leg and joint) across a variety of human movements (i.e. running or hopping) as well as potential issues with the reliability of these measures, especially joint stiffness. Therefore, the aims of this study were to provide a comparison of the various methods for measuring stiffness during two forms of human bouncing locomotion (running and hopping) along with the measurement reliability to determine the best methods to assess links with injury risk in triathletes. Methods. Vertical, leg and joint stiffness were estimated in 12 healthy male competitive triathletes on two occasions, 7 days apart, using both running at 5.0 ms-1 and hopping (2.2 Hz) tasks. Results. Inter-day reliability was good for vertical (ICC = 0.85) and leg (ICC = 0.98) stiffness using the time method. Joint stiffness reliability was poor when assessed individually. Reliability was improved when taken as the sum of the hip, knee and ankle (ICC = 0.86). The knee and ankle combination provided the best correlation with leg stiffness during running (Pearson's Correlation = 0.82). Discussion. The dynamic and time methods of calculating leg stiffness had better reliability than the "true'' method. The time and dynamic methods had the best correlation with the different combinations of joint stiffness, which suggests that they should be considered for biomechanical screening of triathletes. The knee and ankle combination had the best correlation with leg stiffness and is therefore proposed to provide the most information regarding lower limb mechanics during gait in triathletes. [ABSTRACT FROM AUTHOR]

The aim of this study was to quantify the validity and intra-tester reliability of a novel method of kinematic measurement. The measurement target was the joint angles of an athlete performing a BMX Supercross (SX) gate start action through the first 1.2 s of movement in situ on a BMX SX ramp using a standard gate start procedure. The method employed GoPro® Hero 4 Silver (GoPro Inc., USA) cameras capturing data at 120 fps 720 p on a 'normal' lens setting. Kinovea 0.8.15 (Kinovea.org, France) was used for analysis. Tracking data was exported and angles computed in Matlab (Mathworks®, USA). The gold standard 3D method for joint angle measurement could not safely be employed in this environment, so a rigid angle was used. Validity was measured to be within 2°. Intratester reliability was measured by the same tester performing the analysis twice with an average of 55 days between analyses. Intra-tester reliability was high, with an absolute error <6° and <9 frames (0.075 s) across all angles and time points for key positions, respectively. The methodology is valid within 2° and reliable within 6° for the calculation of joint angles in the first -1.25 s. [ABSTRACT FROM AUTHOR]

Background. There is convincing evidence for the benefits of resistance training on vertical jump improvements, but little evidence to guide optimal training prescription. The inability to detect small between modality effects may partially reflect the use of ANOVA statistics. This study represents the results of a sub-study from a larger project investigating the effects of two resistance training methods on load carriage running energetics. Bayesian statistics were used to compare the effectiveness of isoinertial resistance against speed-power training to change countermovement jump (CMJ) and squat jump (SJ) height, and joint energetics. Methods. Active adults were randomly allocated to either a six-week isoinertial (n= 16; calf raises, leg press, and lunge), or a speed-power training program (n = 14; countermovement jumps, hopping, with hip flexor training to target pre-swing running energetics). Primary outcome variables included jump height and joint power. Bayesian mixed modelling and Functional Data Analysis were used, where significance was determined by a non-zero crossing of the 95% Bayesian Credible Interval (CrI). Results. The gain in CMJ height after isoinertial training was 1.95 cm (95% CrI [0.85- 3.04] cm) greater than the gain after speed-power training, but the gain in SJ height was similar between groups. In the CMJ, isoinertial training produced a larger increase in power absorption at the hip by a mean 0.018% (equivalent to 35 W) (95% CrI [0.007-0.03]), knee by 0.014% (equivalent to 27 W) (95% CrI [0.006-0.02]) and foot by 0.011% (equivalent to 21 W) (95% CrI [0.005-0.02]) compared to speed-power training. Discussion. Short-term isoinertial training improved CMJ height more than speed- power training. The principle adaptive difference between training modalities was at the level of hip, knee and foot power absorption. [ABSTRACT FROM AUTHOR]

Background: In recent years, athletes have ventured into ultra-endurance and adventure racing events, which tests their ability to race, navigate, and survive. These events often require race participants to carry some form of load, to bear equipment for navigation and survival purposes. Previous studies have reported specific alterations in biomechanics when running with load which potentially influence running performance and injury risk. We hypothesize that a biomechanically informed neuromuscular training program would optimize running mechanics during load carriage to a greater extent than a generic strength training program. Methods: This will be a two group, parallel randomized controlled trial design, with single assessor blinding. Thirty healthy runners will be recruited to participate in a six weeks neuromuscular training program. Participants will be randomized into either a generic training group, or a biomechanically informed training group. Primary outcomes include self-determined running velocity with a 20 % body weight load, jump power, hopping leg stiffness, knee extensor and triceps-surae strength. Secondary outcomes include running kinetics and kinematics. Assessments will occur at baseline and post-training. Discussion: To our knowledge, no training programs are available that specifically targets a runner's ability to carry load while running. This will provide sport scientists and coaches with a foundation to base their exercise prescription on. [ABSTRACT FROM AUTHOR]

This study compared the biomechanical characteristics of the heavy sprint-style sled pull and squat. Six experienced male strongman athletes performed sled pulls and squats at 70% of their 1RM squat. Significant kinematic and kinetic differences were observed between the sled pull start and squat at the start of the concentric phase and at maximum knee extension. The first stride of the heavy sled pull demonstrated significantly (p<0.05) lower stride lengths and average velocities and a higher mean ratio of force than the stride at 2 - 3 m. The force orientation and magnitude associated with the heavy sprint-style sled pull demonstrates that the heavy sled pull may be an effective conditioning stimulus to generate superior anterior-propulsive forces compared to vertically orientated exercises such as the squat with the same given load. Such adaptations may be beneficial in sports where higher levels of sprint momentum are needed to make and break tackles. [ABSTRACT FROM AUTHOR]

This study compared the biomechanical characteristics of the log lift and clean and jerk. Six experienced male strongman athletes performed log lifts and clean and jerks at 70% of their 1RM clean and jerk. Significant (p<0.05) between-exercise kinematic differences were observed throughout all the lifting phases, except at lift completion. The log lift demonstrated significantly greater trunk (↑24%) and hip ((↑9%) range of motion than the clean and jerk. Significantly greater peak bar velocities were achieved in the clean and jerk in the second pull ( 16%) and the jerk ((↑14%). While similarities existed in ground reaction force data between the lifts, mean and peak powers were significantly greater ((↑40% to (↑64%) in propulsive phases of the clean and jerk. The log lift may be an effective conditioning stimulus to teach rapid triple extension while generating similar vertical and anterior-propulsive forces as the clean and jerk with the same given load. [ABSTRACT FROM AUTHOR]

This study compared the biomechanical characteristics of the farmers walk, deadlift and unloaded walk. Six experienced male strongman athletes performed farmers' walks and deadlifts at 70% of their 1RM deadlift. Significant differences (p < 0.05) were apparent at knees passing with the farmers lift demonstrating greater trunk extension, thigh angle, knee flexion and ankle dorsiflexion. Significantly greater mean vertical and anterior forces were observed in the farmers lift than deadlift. The farmers walk demonstrated significantly greater peak forces and stride rates and significantly shorter stride lengths, ground contact times, and swing times than unloaded walk. Significantly greater dorsiflexion, knee flexion, thigh angle, and significantly lesser trunk angle at foot strike were also observed in the farmers walk. The farmers lift may be an effective lifting alternative to the deadlift, to generating more anterior-propulsive and vertical force with less stress to the lumbar spine due to the more vertical trunk position. [ABSTRACT FROM AUTHOR]

The article presents a study on the use of regression models to determine factors that affect an athlete's ability in jumping, sprinting, and changing direction. Topics include biomechanical variables, maximum strength tests, and the measurement of rate of force development (RFD) values. Anthropometric data and athletic performance are also discussed.

This paper is the second in our three part series examining how a variety of biomechanical principles and concepts have direct relevance to the prescription of resistance training for the general and athletic populations as well as for musculoskeletal injury rehabilitation. In this paper, we considered different neuromuscular characteristics of resistance exercise. We started by defining the causes of motion, discussing force and Newton's second law of linear motion. This led to discussion of impulse, and how its relationship with momentum can be used to study force-time curves recorded from different ground-based resistance exercises. This enables the sports biomechanist to derive movement velocity, which enables study of the relationship between force and velocity, and we concluded that as the force required to cause movement increases the velocity of movement must decrease. This relationship is critical because it enables strength and conditioning coaches and exercise professionals to manipulate resistance-training loads to maximise training gains for sports performance. We described representative force-time curves from basic human movements to provide a foundation for discussion about how different resistance-training gains can be achieved. This focused on exercise technique, including use of the stretch-shortening cycle, magnitude of load, ballistic resistance exercise, and elastic band and chain resistance (although elements of this will receive greater attention in our final article). Finally, we defined and explained the concept of mechanical work and power output, examining the effect that load has on power output by considering the load-power relationships of different common resistance exercises. We hope that exercise professionals will benefit from this knowledge of applied resistance training biomechanics. Specifically, we feel that the take home message of this article is that resistance exercise load and technique can be manipulated to maximise resistance-training gains, and that this can be particularly useful for athletes trying to improve sporting performance. [ABSTRACT FROM AUTHOR]

The Paralympic Games are the pinnacle of sport for many athletes with a disability. A potential issue for many wheelchair athletes is how to train hard to maximise performance while also reducing the risk of injuries, particularly to the shoulder due to the accumulation of stress placed on this joint during activities of daily living, training and competition. The overall purpose of this narrative review was to use the constraints-led approach of dynamical systems theory to examine how various constraints acting upon the wheelchair-user interface may alter hand rim wheelchair performance during sporting activities, and to a lesser extent, their injury risk. As we found no studies involving Paralympic athletes that have directly utilised the dynamical systems approach to interpret their data, we have used this approach to select some potential constraints and discussed how they may alter wheelchair performance and/or injury risk. Organism constraints examined included player classifications, wheelchair setup, training and intrinsic injury risk factors. Task constraints examined the influence of velocity and types of locomotion (court sports vs racing) in wheelchair propulsion, while environmental constraints focused on forces that tend to oppose motion such as friction and surface inclination. Finally, the ecological validity of the research studies assessing wheelchair propulsion was critiqued prior to recommendations for practice and future research being given. [ABSTRACT FROM AUTHOR]

The article presents research on the kinematics of the heavy sprint-style sled pull, a popular event in so-called "strongman" strength training competitions. Video recorders were used to examine test subject participants in the event. It was found that there was more difference in maximum velocity than in acceleration between slow and fast times in the event, suggesting the heavy sled pull could improve sprinting performance if used in training for other sports.

The article presents the results of a study which investigated the biomechanics and physiology of the tire flip, a strongman competition event. Details of the experimental protocol are presented, which involved the video capture of the movement pattern involved, and measurements of the physiological effects of performing a tire flip.

Background: The sport of strongman is becoming increasingly popular, catering for females, lightweight, and Masters competitors, with strongman exercises also being used by strength and conditioning coaches for a range of athletic groups. Thus, a systematic review was conducted to examine researchers' current understanding of the biomechanics of strongman exercises, with a view to improve strongman athlete performance, provide biomechanical evidence supporting the transferability of strongman exercises to strength and conditioning/rehabilitation programs, and identify gaps in the current knowledge of the biomechanics of strongman exercises. Methods: A two-level search term strategy was used to search five databases for studies relevant to strongman exercises and biomechanics. Results: Eleven articles adherent to the inclusion criteria were returned from the search. The studies provided preliminary biomechanical analysis of various strongman exercises including the key biomechanical performance determinants of the farmer's walk, heavy sled pull, and tire flip. Higher performing athletes in the farmer's walk and heavy sled pull were characterized by a greater stride length and stride rate and reduced ground contact time, while higher performing athletes in the tire flip were characterized by a reduced second pull phase time when compared with lower performing athletes. Qualitative comparison of carrying/walking, pulling and static lifting strongman, traditional weight training exercises (TWTE), and common everyday activities (CEA), like loaded carriage and resisted sprinting, were discussed to further researchers' understanding of the determinants of various strongman exercises and their applications to strength and conditioning practice. A lack of basic quantitative biomechanical data of the yoke walk, unilateral load carriage, vehicle pull, atlas stone lift and tire flip, and biomechanical performance determinants of the log lift were identified. Conclusions: This review has demonstrated the likely applicability and benefit of current and future strongman exercise biomechanics research to strongman athletes and coaches, strength and conditioning coaches considering using strongman exercises in a training program, and tactical operators (e.g., military, army) and other manual labor occupations. Future research may provide a greater understanding of the biomechanical determinants of performance, potential training adaptations, and risks expected when performing and/or incorporating strongman exercises into strength and conditioning or injury rehabilitation programs. [ABSTRACT FROM AUTHOR]

Many smart phones and tablets possess high-speed cameras. An increasing number of human movement professionals (e.g. personal trainers, athletics coaches, strength and conditioning coaches and physiotherapists) are beginning to use human movement analysis apps with their smart phones/tablets to quantitatively assess their clients' performance and injury risk. However, an understanding of the validity and reliability of these tools is required. This narrative review seeks to list some relevant human movement apps; summarise the validity and reliability of selected apps and to provide recommendations for their use in education and practice. [ABSTRACT FROM AUTHOR]