Search

Woody biomass represents an important source of carbon on earth, and its global recycling is highly dependent on Agaricomycetes fungi. White-rot Basidiomycetes are a very important group in this regard, as they possess a large and diverse enzymatic repertoire for biomass decomposition. Among these enzymes, the recently discovered lytic polysaccharide monooxygenases (LPMOs) have revolutionized biomass processing with their novel oxidative mechanism of action. The strikingly high representation of LPMOs in fungal genomes raises the question of their functional versatility. In this work, we studied an AA9 LPMO from the white-rot basidiomycete Pycnoporus sanguineus, PsAA9A. Successfully produced as a recombinant secreted protein in Pichia pastoris, PsAA9A was found to be a C1-specific LPMO active on cellulosic substrates, generating native and oxidized cello-oligosaccharides in the presence of an external electron donor. PsAA9A boosted cellulolytic activity of glysoside hydrolases from families GH1, GH5, and GH6.This study serves as a starting point towards understanding the functional versatility and biotechnological potential of this enzymatic family, highly represented in wood decay fungi, in Pycnoporus genus. KEY POINTS: • PsAA9A is the first AA9 from P. sanguineus to be characterized. • PsAA9A has activity on cellulose, producing C1-oxidized cello-oligosaccharides. • Boosting activity with GH1, GH5, and GH6 was proven.

Carboxylic acid reductases (CARs) are attracting burgeoning attention as biocatalysts for organic synthesis of aldehydes and their follow-up products from economic carboxylic acid precursors. The CAR enzyme class as a whole, however, is still poorly understood. To date, relatively few CAR sequences have been reported, especially from fungal sources. Here, we sought to increase the diversity of the CAR enzyme class. Six new CAR sequences from the white-rot fungus Pycnoporus cinnabarinus were identified from genome-wide mining. Genome and gene clustering analysis suggests that these PcCAR enzymes play different natural roles in Basidiomycete systems, compared to their type II Ascomycete counterparts. The cDNA sequences of all six Pccar genes were deduced and analysis of their corresponding amino acid sequence showed that they encode for proteins of similar properties that possess a conserved modular functional tri-domain arrangement. Phylogenetic analyses showed that all PcCAR enzymes cluster together with the other type IV CARs. One candidate, PcCAR4, was cloned and over-expressed recombinantly in Escherichia coli. Subsequent biotransformation-based screening with a panel of structurally-diverse carboxylic acid substrates suggest that PcCAR4 possessed a more pronounced substrate specificity compared to previously reported CARs, preferring to reduce sterically-rigid carboxylic acids such as benzoic acid. These findings thus present a new functionally-distinct member of the CAR enzyme class.

Background 5-Hydroxymethylfurfural (HMF), a major residual component of a lignocellulosic bio-refinery process, can be transformed into fundamental building blocks for green chemistry via oxidation. While chemical methods are well established, interest is also being directed into the enzymatic oxidation of HMF into the bio-plastic precursor 2,5-furandicarboxylic acid (FDCA). Results We demonstrate that three glyoxal oxidases (PciGLOX) isoenzymes from the Basidiomycete fungus Pycnoporus cinnabarinus were able to oxidize HMF, with PciGLOX2 and PciGLOX3 being the most efficient. The major reaction product obtained with the three isoenzymes was 5-hydroxymethyl-2-furancarboxylic (HMFCA), a precursor in polyesters and pharmaceuticals production, and very little subsequent conversion of this compound was observed. However, small concentrations of FDCA, a substitute for terephthalic acid in the production of polyesters, were also obtained. The oxidation of HMF was significantly boosted in the presence of catalase for PciGLOX2, leading to 70% HMFCA yield. The highest conversion percentages were observed on 2,5-furandicarboxaldehyde (DFF), a minor product from the reaction of PciGLOX on HMF. To bypass HMFCA accumulation and exploit the efficiency of PciGLOX in oxidizing DFF and 5-formyl-2-furan carboxylic acid (FFCA) towards FDCA production, HMF was oxidized in a cascade reaction with an aryl alcohol oxidase (UmaAAO). After 2 h of reaction, UmaAAO completely oxidized HMF to DFF and further to FFCA, with FDCA only being detected when PciGLOX3 was added to the reaction. The maximum yield of 16% FDCA was obtained 24 h after the addition of PciGLOX3 in the presence of catalase. Conclusions At least two conversion pathways for HMF oxidation can be considered for PciGLOX; however, the highest selectivity was seen towards the production of the valuable polyester precursor HMFCA. The three isoenzymes showed differences in their catalytic efficiencies and substrate specificities when reacted with HMF derivatives. Electronic supplementary material The online version of this article (10.1186/s40694-019-0067-8) contains supplementary material, which is available to authorized users.

14 p.-8 fig.-1 tab., White-rot (WR) fungi are pivotal decomposers of dead organic matter in forest ecosystems and typically use a large array of hydrolytic and oxidative enzymes to deconstruct lignocellulose. However, the extent of lignin and cellulose degradation may vary between species and wood type. Here we combined comparative genomics,transcriptomics and secretome proteomics to identify conserved enzymatic signatures at the onset of wood decaying activity within the Basidiomycota genus Pycnoporus. We observed strong conservation in the genome structures and the repertoires of protein coding genes across the four Pycnoporus species described to date,despite the species having distinct geographic distributions. We further analyzed the early response of P. cinnabarinus, P. coccineus and P. sanguineus to diverse (ligno)-cellulosic substrates. We identified a conserved set of enzymes mobilized by the three species for breaking down cellulose, hemicellulose and pectin.The co-occurrence in the exo-proteomes of H2O2 producing enzymes with H2O2 consuming enzymes was a common feature of the three species, although each enzymatic partner displayed independent transcriptional regulation. Finally, cellobiose dehydrogenase-coding genes were systematically co-regulated with at least one AA9 LPMO gene, indicative of enzymatic synergy in vivo. This study highlights a conserved core white-rot fungal enzymatic mechanism behind the wood decaying process., This work was supported by The French National Agency for Research (ANR-14-CE06-0020). The work conducted by the U.S. Department of Energy Joint Genome Institute, a DOE Office of Science User Facility, is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The work by CSIC was supported by the Ministerio de Ciencias, Innovación y Universidades de España (BIO2017-86559-R).

Biorecovery is emerging as a promising approach to retrieve gold from various sources, while its efficiency is usually restricted by the limited functional groups on natural microbial biomass surface. This study aims to intensify Pycnoporus sanguineus boosted sorption-reduction coupled gold biorecovery process via microbial surface modification. Results showed that grafting polyallylamine hydrochloride onto P. sanguineus biomass surface increased amino group content on microbial biomass surface from 1.29 to 2.81 mmol/g. When applying modified biomass to gold biorecovery with initial gold concentrations of 1.0, 2.0 and 3.0 mM, biosorption equilibrium time shortened to the 12.5%, 37.5% and 41.7% of those obtained with pristine biomass, and sorption rate constants correspondingly increased to 11.2, 3.1 and 3.7 folds as well. Maximum sorption capacity increased 30% and the affinity between biomass and gold enhanced heavily after microbial surface modification. Meanwhile, microbial surface modification favored gold reduction and gold nanoparticles (AuNPs) formation. The change of microbial biomass morphology from smooth surface with some branched structure to layered stacking structure with many pores and the increase of amino group content on microbial biomass surface were the main impetus for the gold bioreocovery process intensification.

Bioremediation is a strategy to mitigate environmental impacts of hazardous pollutants from anthropogenic sources. Natural byproducts, including agroindustrial wastes (AW) can be used to induce enzyme biosynthesis, leading up to enhancement of pollutants degradation process. Therefore, this study aimed to evaluate the use of cupuacu, Theobroma grandiflorum AW as Pycnoporus sanguineus Laccase (Lac) inducer in order to promote 17-α-ethinylestradiol (EE2) bioremediation. The macro and micro-nutrients levels of cupuacu AWs were evaluated in order to establish further correlations with enzymatic biosynthesis induction. The fungus was cultivated for 7 days in temperature of 28 ± 2 °C and agitation of 150 rpm. For bioremediation, Lac enzymatic extract was added to EE2 solution (10 µg mL−1) and the percentage of removal was evaluated by HPLC after 1–24 hr of reaction. At optimized conditions, the enzyme extract production was remarkably enhanced by adding only 1% (w/v) of cupuacu AW. Lac activity reached ...

Emerging contaminants like hormones can interfere ecological life health. Both liquid cultivation and direct enzymatic process have been proved effective for hormonal removal. This study aimed to assess direct removal of 17 β -estradiol (E2) from solid medium poultry litter (PL) by cultivating laccase-producing fungi toward clean treatment of PL. Before E2 removal test, laccase production was optimized by addition of citric acid and lignocellulosic biomasses into PL, which turned out to dramatically enhance laccase production to varying degrees. The highest laccase activity of approximately 16 U/g medium was produced by Pycnoporus sp. SYBC-L3 on PL mixed with sweat sorghum bagasse at a 2 to 3 (g/g) ratio. An extra dose of E2 spiked in the PL/biomass mixture (final concentration of 10 μg/g) was used to test its effect on laccase production and subsequent E2 removal. Over 80% E2 was removed from the above cultivation system, and E2 removal appeared to be positively correlated with laccase activity. Our results might present an alternative clean strategy for livestock manure treatment before land application.

The genome of the white rot fungus Pycnoporus cinnabarinus includes a large number of genes encoding enzymes implicated in lignin degradation. Among these, three genes are predicted to encode glyoxal oxidase, an enzyme previously isolated from Phanerochaete chrysosporium . The glyoxal oxidase of P. chrysosporium is physiologically coupled to lignin-oxidizing peroxidases via generation of extracellular H 2 O 2 and utilizes an array of aldehydes and α-hydroxycarbonyls as the substrates. Two of the predicted glyoxal oxidases of P. cinnabarinus , GLOX1 ( Pci GLOX1) and GLOX2 ( Pci GLOX2), were heterologously produced in Aspergillus niger strain D15#26 ( pyrG negative) and purified using immobilized metal ion affinity chromatography, yielding 59 and 5 mg of protein for Pci GLOX1 and Pci GLOX2, respectively. Both proteins were approximately 60 kDa in size and N-glycosylated. The optimum temperature for the activity of these enzymes was 50°C, and the optimum pH was 6. The enzymes retained most of their activity after incubation at 50°C for 4 h. The highest relative activity and the highest catalytic efficiency of both enzymes occurred with glyoxylic acid as the substrate. The two P. cinnabarinus enzymes generally exhibited similar substrate preferences, but Pci GLOX2 showed a broader substrate specificity and was significantly more active on 3-phenylpropionaldehyde. IMPORTANCE This study addresses the poorly understood role of how fungal peroxidases obtain an in situ supply of hydrogen peroxide to enable them to oxidize a variety of organic and inorganic compounds. This cooperative activity is intrinsic in the living organism to control the amount of toxic H 2 O 2 in its environment, thus providing a feed-on-demand scenario, and can be used biotechnologically to supply a cheap source of peroxide for the peroxidase reaction. The secretion of multiple glyoxal oxidases by filamentous fungi as part of a lignocellulolytic mechanism suggests a controlled system, especially as these enzymes utilize fungal metabolites as the substrates. Two glyoxal oxidases have been isolated and characterized to date, and the differentiation of the substrate specificity of the two enzymes produced by Pycnoporus cinnabarinus illustrates the alternative mechanisms existing in a single fungus, together with the utilization of these enzymes to prepare platform chemicals for industry.

The optimization of ligninolytic enzyme (LE) activities in a novel fungal co-culture between Pycnoporus sanguineus and Beauveria brongniartii were studied using a Plackett-Burman experimental design (PBED) and a central composite design (CCD). In addition, H

International audience; The use of synthetic dyes for laccase induction in vivo has been scarcely explored. We characterized the effect of adding different synthetic dyes to liquid cultures of Pycnoporus sanguineus on laccase production. We found that carminic acid (CA) can induce 722 % and alizarin yellow 317 % more laccase than control does, and they promoted better fungal biomass development in liquid cultures. Aniline blue and crystal violet did not show such positive effect. CA and alizarin yellow were degraded up to 95 % during P. sanguineus culturing (12 days). With this basis, CA was selected as the best inducer and used to evaluate the induction of laccase on solid-state fermentation (SSF), using sugarcane bagasse (SCB) as substrate, in an attempt to reach selective delignification. We found that laccase induction occurred in SSF, and a slight inhibition of cellulase production was observed when CA was added to the substrate; also, a transformation of SCB under SSF was followed by the 13 C cross polarization magic angle spinning (CPMAS) solid-state nuclear magnetic resonance (NMR). Results showed that P. sanguineus can selectively delignify SCB, decreasing aromatic C compounds by 32.67 % in 16 days; O-alkyl C region (polysaccharides) was degraded less than 2 %; delignification values were not correlated with laccase activities. Cellulose-crystallinity index was increased by 27.24 % in absence of CA and 15.94 % when 0.01 mM of CA was added to SCB; this dye also inhibits the production of fungal biomass in SSF (measured as alkyl C gain). We conclude that CA is a good inducer of laccase in liquid media, and that P. sanguineus is a fungus with high potential for biomass delignification.

Cellobiose dehydrogenase (CDH), an extracellular flavocytochrome produced by several wood-degrading fungi, was detected in the culture supernatant of the selective delignifier Pycnoporus sanguineus maintained on a cellulose-based liquid medium. Cellobiose dehydrogenase was purified as two active fractions: CDH1-FAD (flavin domain) (40.4 fold) with recovery of 10.9% and CDH1 (flavo-heme enzyme) (54.7 fold) with recovery of 9.8%. As determined by SDS-PAGE, the molecular mass of the purified enzyme was found to be 113.4kDa and its isoelectric point was 4.2, whereas these values for the FAD-domain were 82.7kDa and pI=6.7. The carbohydrate content of the purified enzymes was 9.2%. In this work, the cellobiose dehydrogenase gene cdh1 and its corresponding cDNA from fungus P. sanguineus were isolated, cloned, and characterized. The 2310bp full-length cDNA of cdh1 encoded a mature CDH protein containing 769 amino acids, which was preceded by a signal peptide of 19 amino acids. Moreover, both active fractions were characterized in terms of kinetics, temperature and pH optima, and antioxidant properties.

Fungi compete against each other for environmental resources. These interspecific combative interactions encompass a wide range of mechanisms. In this study, we highlight the ability of the white-rot fungus Pycnoporus coccineus to quickly overgrow or replace a wide range of competitor fungi, including the gray-mold fungus Botrytis cinerea and the brown-rot fungus Coniophora puteana . To gain a better understanding of the mechanisms deployed by P. coccineus to compete against other fungi and to assess whether common pathways are used to interact with different competitors, differential gene expression in P. coccineus during cocultivation was assessed by transcriptome sequencing and confirmed by quantitative reverse transcription-PCR analysis of a set of 15 representative genes. Compared with the pure culture, 1,343 transcripts were differentially expressed in the interaction with C. puteana and 4,253 were differentially expressed in the interaction with B. cinerea , but only 197 transcripts were overexpressed in both interactions. Overall, the results suggest that a broad array of functions is necessary for P. coccineus to replace its competitors and that different responses are elicited by the two competitors, although a portion of the mechanism is common to both. However, the functions elicited by the expression of specific transcripts appear to converge toward a limited set of roles, including detoxification of secondary metabolites.

Production of extracellular laccase by the white-rot fungus Pycnoporus sanguineus was examined in batch submerged cultures in shake flasks, baffled shake flasks and a stirred tank bioreactor. The biomass growth in the various culture systems closely followed a logistic growth model. The production of laccase followed a Luedeking-Piret model. A modified Luedeking-Piret model incorporating logistic growth effectively described the consumption of glucose. Biomass productivity, enzyme productivity and substrate consumption were enhanced in baffled shake flasks relative to the cases for the conventional shake flasks. This was associated with improved oxygen transfer in the presence of the baffles. The best results were obtained in the stirred tank bioreactor. At 28 °C, pH 4.5, an agitation speed of 600 rpm and a dissolved oxygen concentration of ~25 % of air saturation, the laccase productivity in the bioreactor exceeded 19 U L(-1 )days(-1), or 1.5-fold better than the best case for the baffled shake flask. The final concentration of the enzyme was about 325 U L(-1).

This study examined the potential of untreated and alkali-pretreated sugarcane bagasse (SCB) in cellulase, reducing sugar (RS) and fungal biomass production via solid state fermentation (SSF) using Pycnoporus sanguineus. The impact of the composition, structure and cellulase adsorption ability of SCB on the production of cellulase, RS and fungal biomass was investigated. From the morphological and compositional analyses, untreated SCB has relatively more structural changes with a higher percentage of depolymerisation on the cellulose, hemicellulose and lignin content compared to alkali-pretreated SCB. Thus, untreated SCB favoured the production of cellulase and fungal biomass whereas alkali-pretreated SCB yielded a higher amount of RS. The composition and morphology of untreated SCB did not encourage RS production and this suggested that RS produced during SSF might be consumed in a faster rate by the more abundantly grown fungus. Besides that, alkali-pretreated SCB with higher cellulase adsorption ability could have adsorbed the cellulase produced and resulted in a lower cellulase titre. In short, the production of specific bioproducts via SSF is dependent on the structure and composition of the substrate applied.

Biorecovery is emerging as a promising process to retrieve gold from secondary resources. The present study aimed to explore the uptake pattern of Pycnoporus sanguineus biomass for gold, identify the effective functional groups in gold recovery process, and thus further intensify the process via microbial surface modification. Results showed that P. sanguineus biomass could effectively recover gold with the formation of highly crystal AuNPs without any exogeneous electron donor. Under the conditions of various initial gold concentrations (1.0, 2.0, and 3.0 mM), biomass dosage of 2.0 g/L, solution pH value of 4.0, and incubation temperature of 30°C, the uptake equilibrium established after 4, 8, and 12 h, respectively. The uptake process could be well described by pseudo-second order kinetics model (R2 = 0.9988) and Langmuir isotherm model (R2 = 0.9958). The maximum uptake capacity of P. sanguineus reached as high as 358.69 mg/g. Further analysis indicated that amino, carboxyl and hydroxyl groups positively contributed to the uptake process. Among them, amino group significantly favored the uptake of gold during recovery process. When P. sanguineus biomass was modified by introduction of amino group, the gold uptake process was successfully intensified by shortening the uptake period and enhancing the uptake capacity. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1314-1322, 2017.

Laccase from Pycnoporus sanguineus CS43 was successfully immobilized onto Immobead-150 and Eupergit-C by covalent binding and by entrapment in LentiKats. The highest immobilization was onto Immobead-150 (97.1±1.2%) compared to the other supports, LentiKats (89±1.1%) and Eupergit-C (83.2±1.4%). All three immobilized enzyme systems showed increased thermostability and better mechanical properties than free laccase. Moreover, after 5 cycles of reuse of these systems, 90% of initial laccase activity was retained. Immobead-150 and LentiKats systems exhibited the highest efficiencies in removal of m-cresol under the combined actions of biodegradation and adsorption, while laccase entrapped in LentiKats showed a high ability for degradation of m-cresol within 24h. In addition, the typical Michaelis-Menten enzymatic model effectively described the kinetic profile of m-cresol degradation by the enzyme entrapped in LentiKats. Based on the results obtained in the present study, it can be established that the immobilized biocatalysts developed here possess significant potential for wastewater treatment.

Auxiliary activities family 3 subfamily 2 (AA3_2) from the CAZy database comprises various functions related to ligninolytic enzymes, such as fungal aryl alcohol oxidases (AAO) and glucose oxidases, both of which are flavoenzymes. The recent study of the Pycnoporus cinnabarinus CIRM BRFM 137 genome combined with its secretome revealed that four AA3_2 enzymes are secreted during biomass degradation. One of these AA3_2 enzymes, scf184803.g17, has recently been produced heterologously in Aspergillus niger . Based on the enzyme's activity and specificity, it was assigned to the glucose dehydrogenases ( P . cinnabarinus GDH [ Pc GDH]). Here, we analyze the distribution of the other three AA3_2 enzymes (scf185002.g8, scf184611.g7, and scf184746.g13) to assess their putative functions. These proteins showed the highest homology with aryl alcohol oxidase from Pleurotus eryngii . Biochemical characterization demonstrated that they were also flavoenzymes harboring flavin adenine dinucleotide (FAD) as a cofactor and able to oxidize a wide variety of phenolic and nonphenolic aryl alcohols and one aliphatic polyunsaturated primary alcohol. Though presenting homology with fungal AAOs, these enzymes exhibited greater efficiency in reducing electron acceptors (quinones and one artificial acceptor) than molecular oxygen and so were defined as aryl-alcohol:quinone oxidoreductases (AAQOs) with two enzymes possessing residual oxidase activity ( Pc AAQO2 and Pc AAQO3). Structural comparison of Pc AAQO homology models with P. eryngii AAO demonstrated a wider substrate access channel connecting the active-site cavity to the solvent, explaining the absence of activity with molecular oxygen. Finally, the ability of Pc AAQOs to reduce radical intermediates generated by laccase from P. cinnabarinus was demonstrated, shedding light on the ligninolytic system of this fungus.

Fungal laccases are enzymes that have been studied because of their ability to decolorize and detoxify effluents; they are also used in paper bleaching, synthesis of polymers, bioremediation, etc. In this work we were able to express a laccase from Trametes (Pycnoporus) sanguineus in the filamentous fungus Trichoderma atroviride. For this purpose, a transformation vector was designed to integrate the gene of interest in an intergenic locus near the blu17 terminator region. Although monosporic selection was still necessary, stable integration at the desired locus was achieved. The native signal peptide from T. sanguineus laccase was successful to secrete the recombinant protein into the culture medium. The purified, heterologously expressed laccase maintained similar properties to those observed in the native enzyme (Km and kcat and kcat/km values for ABTS, thermostability, substrate range, pH optimum, etc). To determine the bioremediation potential of this modified strain, the laccase-overexpressing Trichoderma strain was used to remove xenobiotic compounds. Phenolic compounds present in industrial wastewater and bisphenol A (an endocrine disruptor) from the culture medium were more efficiently removed by this modified strain than with the wild type. In addition, the heterologously expressed laccase was able to decolorize different dyes as well as remove benzo[α]pyrene and phenanthrene in vitro, showing its potential for xenobiotic compound degradation.

This study presents the biodecolorization potential of basidiomycete fungi Trametes hirsuta, Pycnoporus sp., and Irpex sp. for different reactive dyes viz. Reactive Red 120, Remazol Brilliant Blue R (RBBR), Reactive Orange G, and Reactive Orange 16 under static and shaking conditions. The screening trials revealed that T. hirsuta exhibited maximum potential (83.75 %) for biodecolorization of RBBR dye under static conditions after the fifth day of incubation. However, the rate of biodecolorization of RBBR dye by Pycnoporus sp. was much slow and reached maximum (81.25 %) after 15 days of incubation under shaking conditions. By process optimization, enhanced decolorization (91.2 %) of RBBR by T. hirsuta was achieved at pH 5.5 within 24 h using a defined salt medium amended with p-coumaric acid under static conditions. pH was found to be an important parameter for the enzymatic system involved in RBBR dye decolorization by T. hirsuta and Pycnoporus sp. Biodecolorization of RBBR dye was determined by a reduction in optical density at the wavelength of maximum absorbance (λ, 578 nm) by UV-vis spectrophotometer. The shift in maximum wavelength toward shorter/longer wavelength in UV-vis scanning spectrum revealed the degradation of RBBR dye into different transformation products.

Co-cultivation of mutant Penicillium oxalicum SAU(E)-3.510 and Pleurotus ostreatus MTCC 1804 was evaluated for the production of xylanase-laccase mixture under solid-state fermentation (SSF) condition. Growth compatibility between mutant P. oxalicum SAU(E)-3.510 and white rot fungi (P. ostreatus MTCC 1804, Trametes hirsuta MTCC 136 and Pycnoporus sp. MTCC 137) was analyzed by growing them on potato dextrose agar plate. Extracellular enzyme activities were determined spectrophotometrically. Under derived conditions, paired culturing of mutant P. oxalicum SAU(E)-3.510 and P. ostreatus MTCC 1804 resulted in 58% and 33% higher levels of xylanase and laccase production, respectively. A combination of sugarcane bagasse and black gram husk in a ratio of 3:1 was found to be the most ideal solid substrate and support for fungal colonization and enzyme production during co-cultivation. Maximum levels of xylanase (8205.31 ± 168.31 IU g(-1)) and laccase (375.53 ± 34.17 IU g(-1)) during SSF were obtained by using 4 g of solid support with 80% of moisture content. Furthermore, expressions of both xylanase and laccase were characterized during mixed culture by zymogram analysis. Improved levels of xylanase and laccase biosynthesis were achieved by co-culturing the mutant P. oxalicum SAU(E)-3.510 and P. ostreatus MTCC 1804. This may be because of efficient substrate utilization as compared to their respective monocultures in the presence of lignin degradation compounds because of synergistic action of xylanase and laccase. Understanding and developing the process of co-cultivation appears productive for the development of mixed enzyme preparation with tremendous potential for biobleaching.

The biological delignification of lignocellulosic feedstocks, Prosopis juliflora and Lantana camara was carried out with Pycnoporus cinnabarinus, a white rot fungus, at different scales under solid-state fermentation (SSF) and the fungal treated substrates were evaluated for their acid and enzymatic saccharification. The fungal fermentation at 10.0 g substrate level optimally delignified the P. juliflora by 11.89% and L. camara by 8.36%, and enriched their holocellulose content by 3.32 and 4.87%, respectively, after 15 days. The fungal delignification when scaled up from 10.0 g to 75.0, 200.0 and 500.0 g substrate level, the fungus degraded about 7.69-10.08% lignin in P. juliflora and 6.89-7.31% in L. camara, and eventually enhanced the holocellulose content by 2.90-3.97 and 4.25-4.61%, respectively. Furthermore, when the fungal fermented L. camara and P. juliflora was hydrolysed with dilute sulphuric acid, the sugar release was increased by 21.4-42.4% and the phenolics content in hydrolysate was decreased by 18.46 and 19.88%, as compared to the unfermented substrate acid hydrolysis, respectively. The reduction of phenolics in acid hydrolysates of fungal treated substrates decreased the amount of detoxifying material (activated charcoal) by 25.0-33.0% as compared to the amount required to reduce almost the same level of phenolics from unfermented substrate hydrolysates. Moreover, an increment of 21.1-25.1% sugar release was obtained when fungal treated substrates were enzymatically hydrolysed as compared to the hydrolysis of unfermented substrates. This study clearly shows that fungal delignification holds potential in utilizing plant residues for the production of sugars and biofuels.

Particleboard is a popular wood composite made using mixtures of wood particles and resin, binder or adhesives, pressed at high temperature to cured. Despite its popularity, formaldehyde-based adhesives used in the formulations lead to cancerous effect as the formaldehyde fumes released from the unreacted chemicals travel into human lungs. Therefore this study tries to reduce the utilization of formaldehyde-based resin by replacement of a significant portion of the binder with glutardialdehyde modified corn starch as the binder. However, this practice could lower the durability of the particleboards against biological attack. Therefore, this study evaluates the fungal resistance of the particleboard panels. Panels were manufactured using 83:15:2 ratio of wood, corn starch-modified with glutardialdehyde and formaldehyde resin, respectively, as an improvement. Four types of wood-degrading fungal were chosen including Trametes versicolor, Formitopsis palustris, Schizophyllum commune and Pycnoporus sangineus. Some of the particleboard showed a little increased in fungal resistance when 2% urea formaldehyde was added, compared to using glutardialdehyde modified corn starch and starch only as the binder. Nine out of twelve samples showed a decrement in fungal degradation by using glutardialdehyde modified starch as the binder. Meanwhile, 6 out of 12 samples showed higher fungal resistance after additional of 2% urea formaldehyde in the binder formulation. Based on the results, combination of modified corn starch and urea formaldehyde resin could have a potential to be used in particleboard making without reducing the initial resistance towards fungal attack.

The present work describes the purification and characterization of a novel extracellular polygalacturonase, PGase I, produced by Pycnoporus sanguineus when grown on citrus fruit pectin. This substrate gave enhanced enzyme production as compared to sucrose and lactose. PGase I is an exocellular enzyme releasing galacturonic acid as its principal hydrolysis product as determined by TLC and orcinol-sulphuric acid staining. Its capacity to hydrolyze digalacturonate identified PGase I as an exo -polygalacturonase. SDS-PAGE showed that PGase I is an N -glycosidated monomer. The enzyme has a molecular mass of 42 kDa, optimum pH 4.8 and stability between pH 3.8 and 8.0. A temperature optimum was observed at 50–60 °C, with some enzyme activity retained up to 80 °C. Its activation energy was 5.352 cal mol −1 . PGase I showed a higher affinity towards PGA than citric pectin (Km = 0.55 ± 0.02 and 0.72 ± 0.02 mg ml −1 , respectively). Consequently, PGase I is an exo -PGase, EC 3.2.1.82.

A new white-rot fungus SYBC-L1, which could produce an extracellular laccase, was isolated from a decayed Elaeocarpus sylvestris. The strain was identified as Pycnoporus sp. SYBC-L1 according to the morphological characteristics and ribosomal ITS1-5.8S-ITS2 RNA genomic sequence analysis. The highest laccase activity of 24.1 U ml(-1), which was approximately 40-fold than that in basal medium, was achieved in optimal culture medium in submerged fermentation. The laccase produced by Pycnoporus sp. SYBC-L1 was not only a cold adaptation enzyme with a relative catalytic activity of 30.2% at 0 degrees C but also a high thermostable enzyme. The half-lives at 60, 70 and 80 degrees C were 85.5, 37.2, and 2.6 h, respectively. The laccase could effectively decolorize weak acid blue AS and diamond black PV up to 88% and 74.7%, respectively, within 2 h in the absence of any redox mediators. The results suggested Pycnoporus sp. SYBC-L1 was a potential candidate for laccase production and industrial application.

Pycnoporous sanguineus was identified as a laccase producer when grown on diluted molasses. The single laccase was purified with a purification factor of 967 by ammonium sulphate precipitation, ion exchange and dye affinity chromatography, to a specific activity of 32.9 U/mg. The molecular mass of 58,000 Da, the optimum pH range between 3 and 5 with ABTS, DMP and guaiacol as substrates and the isoelectric point of 6.7, was similar to some other laccases of filamentous fungi. The optimum temperature was 55 °C and the enzyme displayed enhanced thermal stability with a half-life of 170 min at 75 °C. In terms of k cat / K m values for ABTS, syringaldazine and DMP, DMP was the best substrate. Kinetic analysis of fifteen more compounds revealed that, the enzyme was a true laccase with a requirement for a free –OH group with an adjacent free or derivatised –OH. The o -diphenols were preferred above their p- counterparts. Compounds with three adjacent –OH groups displayed higher binding affinities but phloroglucinol, an m -substituted phenol was unreactive. The apparent higher stability of this laccase makes it a good candidate for further investigation into it possible application in biotechnology.

Aims: Tyrosinase production by Pycnoporus cinnabarinus and Pycnoporus sanguineus was screened among 20 strains originating from various geographical areas, particularly from tropical environments. The tyrosinase from the most efficient strain was purified and characterized and tested for food additive applications. Methods and Results: Monophenolase and diphenolase activities of tyrosinase were measured from cell lysate from the 20 Pycnoporus strains, for 8–10 days of cultivation. The strain P. sanguineus CBS 614.73 showed the highest productivity (45·4 and 163·6 U g−1 protein per day for monophenolase and diphenolase respectively). P. sanguineus CBS 614.73 tyrosinase was purified from concentrated cell lysate, anion‐exchange, size‐exclusion and hydroxyapatite chromatography, with a final yield of 2% and a purification factor of 35–38. The pure enzyme was a monomere with a molecular mass of 45 kDa and it showed four isoforms or isoenzymes with pI between 4·5–5. No N‐glycosylation was found. The N‐terminal amino acid sequence was IVTGPVGGQTEGAPAPNR. The enzyme was shown to be almost fully active in a pH range of 6–7, in a large temperature range (30–70°C), and was stable below 60°C. The main kinetic constants were determined. The tyrosinase was able to convert p‐tyrosol and p‐coumaric acid into hydroxytyrosol and caffeic acid, respectively, and it could also catalyse the cross‐linking formation of a model protein. Conclusions: Among the genus Pycnoporus, known for the production of laccase, the strain P. sanguineus CBS 614.73 was shown to produce one other phenoloxidase, a new monomeric tyrosinase with a specific activity of 30 and 84 U mg−1 protein for monophenolase and diphenolase respectively. Significance and Impact of the Study: This study identified P. sanguineus CBS 614.73 as a potential producer of a tyrosinase which demonstrated effectiveness in the synthesis of antioxidant molecules and in protein cross‐linking.

The production of thermostable laccases from a native strain of the white-rot fungus Pycnoporus sanguineus isolated in Mexico was enhanced by testing different media and a combination of inducers including copper sulfate (CuSO4). The best conditions obtained from screening experiments in shaken flasks using tomato juice, CuSO4, and soybean oil were integrated in an experimental design. Enhanced levels of tomato juice as the medium, CuSO4 and soybean oil as inducers (36.8% (v/v), 3 mmol/L, and 1% (v/v), respectively) were determined for 10 L stirred tank bioreactor runs. This combination resulted in laccase titer of 143,000 IU/L (2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), pH 3.0), which represents the highest activity so far reported for P. sanguineus in a 10-L fermentor. Other interesting media resulting from the screening included glucose-bactopeptone which increased laccase activity up to 20,000 IU/L, whereas the inducers Acid Blue 62 and Reactive Blue 19 enhanced enzyme production in this medium 10 times. Based on a partial characterization, the laccases of this strain are especially promising in terms of thermostability (half-life of 6.1 h at 60 °C) and activity titers.

A laccase stage can be used as a pre-treatment of a standard chemical bleaching sequence to reduce environmental concerns associated to this process. The importance of each independent variable and its influence on the properties of the bleached pulp have been studied in depth in this work, using an adaptive network-based fuzzy inference system (ANFIS) with four independent variables (laccase, buffer, mediator and oxygen) as input. Eucalyptus globulus kraft pulp was biobleached using a laccase from Pycnoporus sanguineus and a natural mediator (acetosyringone). Later, an alkaline extraction and a hydrogen peroxide treatment were applied. Most biobleaching processes showed a decrease in kappa number and an increase in brightness with no significant impact on the viscosity values, compared with the control. Oxygen was the variable with the smallest influence on the final pulp properties while the laccase and buffer solution showed a significant influence.

24 p.-8 fig.-4 tab.-- Levasseur, Anthony et al., [Background] Saprophytic filamentous fungi are ubiquitous micro-organisms that play an essential role in photosynthetic carbon recycling. The wood-decayer Pycnoporus cinnabarinus is a model fungus for the study of plant cell wall decomposition and is used for a number of applications in green and white biotechnology., [Results] The 33.6 megabase genome of P. cinnabarinus was sequenced and assembled, and the 10,442 predicted genes were functionally annotated using a phylogenomic procedure. In-depth analyses were carried out for the numerous enzyme families involved in lignocellulosic biomass breakdown, for protein secretion and glycosylation pathways, and for mating type. The P. cinnabarinus genome sequence revealed a consistent repertoire of genes shared with wood-decaying basidiomycetes. P. cinnabarinus is thus fully equipped with the classical families involved in cellulose and hemicellulose degradation, whereas its pectinolytic repertoire appears relatively limited. In addition, P. cinnabarinus possesses a complete versatile enzymatic arsenal for lignin breakdown. We identified several genes encoding members of the three ligninolytic peroxidase types, namely lignin peroxidase, manganese peroxidase and versatile peroxidase. Comparative genome analyses were performed in fungi displaying different nutritional strategies (white-rot and brown-rot modes of decay). P. cinnabarinus presents a typical distribution of all the specific families found in the white-rot life style. Growth profiling of P. cinnabarinus was performed on 35 carbon sources including simple and complex substrates to study substrate utilization and preferences. P. cinnabarinus grew faster on crude plant substrates than on pure, mono- or polysaccharide substrates. Finally, proteomic analyses were conducted from liquid and solid-state fermentation to analyze the composition of the secretomes corresponding to growth on different substrates. The distribution of lignocellulolytic enzymes in the secretomes was strongly dependent on growth conditions, especially for lytic polysaccharide mono-oxygenases., [Conclusions] With its available genome sequence, P. cinnabarinus is now an outstanding model system for the study of the enzyme machinery involved in the degradation or transformation of lignocellulosic biomass., This work was funded by the Commission of the European Communities through the BIORENEW project (NMP2-CT-2006-026456 “White Biotechnology for added-value products from re newable plant polymers: Design of tailor-made biocatalysts and new industrial bioprocesses”) and the PEROXICATS project (KBBE-2010-4-265397 “Novel and more robust fungal peroxidases as industrial biocatalysts.”), and by the Spanish Ministerio de Economía y Competitividad (MINECO) through the HIPOP project (BIO2011-26694, “Screening and engineering of new high-redox-potential peroxidases”).

Data on glucose dehydrogenases (GDHs) are scarce and availability of these enzymes for application purposes is limited. This paper describes a new GDH from the fungus Pycnoporus cinnabarinus CIRM BRFM 137 that is the first reported GDH from a white-rot fungus belonging to the Basidiomycota. The enzyme was recombinantly produced in Aspergillus niger, a well-known fungal host producing an array of homologous or heterologous enzymes for industrial applications. The full-length gene that encodes GDH from P. cinnabarinus (PcGDH) consists of 2,425 bp and codes for a deduced protein of 620 amino acids with a calculated molecular mass of 62.5 kDa. The corresponding complementary DNA was cloned and placed under the control of the strong and constitutive glyceraldehyde-3-phosphate dehydrogenase promoter. The signal peptide of the glucoamylase prepro sequence of A. niger was used to target PcGDH secretion into the culture medium, achieving a yield of 640 mg L-1, which is tenfold higher than any other reported value. The recombinant PcGDH was purified twofold to homogeneity in a one-step procedure with a 41 % recovery using a Ni Sepharose column. The identity of the recombinant protein was further confirmed by immunodetection using western blot analysis and N-terminal sequencing. The molecular mass of the native PcGDH was 130 kDa, suggesting a homodimeric form. Optimal pH and temperature were found to be similar (5.5 and 60 A degrees C, respectively) to those determined for the previously characterized GDH, i.e., from Glomerella cingulata. However PcGDH exhibits a lower catalytic efficiency of 67 M-1 s(-1) toward glucose. This substrate is by far the preferred substrate, which constitutes an advantage over other sugar oxidases in the case of blood glucose monitoring. The substrate-binding domain of PcGDH turns out to be conserved as compared to other glucose-methanol-choline (GMCs) oxidoreductases. In addition, the ability of PcGDH to reduce oxidized quinones or radical intermediates was clearly demonstrated, which raises prospects for applying this enzyme to detoxify toxic compounds formed during the degradation of lignin.

Operating the saccharification and fermentation processes at high-substrate loadings is a key factor for making ethanol production from lignocellulosic biomass economically viable. However, increasing the substrate loading presents some disadvantages, including a higher concentration of inhibitors (furan derivatives, weak acids, and phenolic compounds) in the media, which negatively affect the fermentation performance. One strategy to eliminate soluble inhibitors is filtering and washing the pretreated material. In this study, it was observed that even if the material was previously washed, inhibitory compounds were released during the enzymatic hydrolysis step. Laccase enzymatic treatment was evaluated as a method to reduce these inhibitory effects. The laccase efficiency was analyzed in a presaccharification and simultaneous saccharification and fermentation process at high-substrate loadings. Water-insoluble solids fraction from steam-exploded wheat straw was used as substrate and Saccharomyces cerevisiae as fermenting microorganism. Laccase supplementation reduced strongly the phenolic content in the media, without affecting weak acids and furan derivatives. This strategy resulted in an improved yeast performance during simultaneous saccharification and fermentation process, increasing significantly ethanol productivity. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013

The white rot fungus Pycnoporus cinnabarinus was characterized with respect to its set of extracellular phenoloxidases. Laccase was produced as the predominant extracellular phenoloxidase in conjunction with low amounts of an unusual peroxidase. Neither lignin peroxidase nor manganese peroxidase was detected. Laccase was produced constitutively during primary metabolism. Addition of the most effective inducer, 2,5-xylidine, enhanced laccase production ninefold without altering the isoenzyme pattern of the enzyme. Laccase purified to apparent homogeneity was a single polypeptide having a molecular mass of approximately 81,000 Da, as determined by calibrated gel filtration chromatography, and a carbohydrate content of 9%. The enzyme displayed an unusual behavior on isoelectric focusing gels; the activity was split into one major band (pI, 3.7) and several minor bands of decreasing intensity which appeared at regular, closely spaced intervals toward the alkaline end of the gel. Repeated electrophoresis of the major band under identical conditions produced the same pattern, suggesting that the laccase was secreted as a single acidic isoform with a pI of about 3.7 and that the multiband pattern was an artifact produced by electrophoresis. This appeared to be confirmed by N-terminal amino acid sequencing of the purified enzyme, which yielded a single sequence for the first 21 residues. Spectroscopic analysis indicated a typical laccase active site in the P. cinnabarinus enzyme since all three typical Cu(II)-type centers were identified. Substrate specificity and inhibitor studies also indicated the enzyme to be a typical fungal laccase. The N-terminal amino acid sequence of the P. cinnabarinus laccase showed close homology to the N-terminal sequences determined for laccases from Trametes versicolor, Coriolus hirsutus, and an unidentified basidiomycete, PM1. The principal features of the P. cinnabarinus enzyme system, a single predominant laccase and a lack of lignin- or manganese-type peroxidase, make this organism an interesting model for further studies of possible alternative pathways of lignin degradation by white rot fungi.

This study investigates fungal pretreatment of switchgrass involving solid state fermentation (SSF) to improve saccharification and simultaneously produce enzymes as co-products. The results revealed that the fungus Pycnoporus sp. SYBC-L3 can significantly degrade lignin and enhance enzymatic hydrolysis efficiency. After a 36-d cultivation period, nearly 30% reduction in lignin content was obtained without significant loss of cellulose and hemicellulose, while a considerable amount of laccase, as high as 6.3 U/g, was produced. After pretreatment, pores on switchgrass surface were observed using scanning electron microscopy (SEM). The enzymatic hydrolysis efficiency for the switchgrass with 36-d pretreatment was about 50% greater than the untreated one. Our results suggest that solid state fungal cultivation may be a good method for switchgrass pretreatment, which can simultaneously achieve high efficiency of enzymatic hydrolysis and production of some useful enzymes for other industrial utilization.

Pycnoporus cinnabarinus laccase and a chimeric laccase-CBM were applied in softwood kraft pulp biobleaching in the presence of 1-hydroxybenzotriazole (HBT). The presence of CBM could enhance the laccase biobleaching potential as a decrease in the enzymatic charge and chlorine dioxide consumption, as well as an increase in pulp brightness were observed. Laccase/HBT treatment could be improved by increasing oxygen pressure from 1 to 3bar and pulp consistency from 5% to 10%. Conversely, under the same conditions, no improvement of laccase-CBM/HBT treatment was observed, indicating a different behavior of both systems. However, laccase-CBM/HBT treatment led to a better preservation of pulp properties. This effect was probably due to fiber surface modifications involving the action of the CBM. Transmission electron microscopy examination of pulp fibers indicated a retention of laccase-CBM inside the pulp fibers due to CBM binding and an increased external microfibrillation of the fibers due to enzymatic treatments.

International audience; The Pycnoporus fungi are white-rot basidiomycetes listed as food- and cosmetic-grade microorganisms. Three high redox potential laccases from Pycnoporus coccineus and Pycnoporus sanguineus were tested and compared, with the commercial Suberase® as reference, for their ability to synthesise natural active oligomers from rutin (quercetin-3-rutinoside, one of the best-known naturally occurring flavonoid glycosides). The aim of this work was to develop a process with technical parameters (solvent, temperature, reaction time and raw materials) that were easy to scale up for industrial production and compatible with cosmetic and pharmaceutical formulation guidelines. The aqueous mixture of glycerol/ethanol/buffer described in this study met this requirement and allowed the solubilisation of rutin and its oxidative bioconversion into oligomers. The four flavonoid oligomer mixtures synthesised using laccases as catalysts were analysed by high performance liquid chromatography–diode array detection–negative electrospray ionisation–multistage mass spectrometry. Their chromatographic elution profiles were compared and 16 compounds were characterised and identified as dimers and trimers of rutin. The oligorutins were different in Suberase® and Pycnoporus laccase reaction mixtures. They were evaluated for their antioxidant, anti-inflammatory and anti-ageing activities on specific enzymatic targets such as cyclooxygenase (COX-2) and human matrix metalloproteinase 3 (MMP-3). Expressed in terms of IC50, the flavonoid oligomers displayed a 2.5- to 3-fold higher superoxide scavenging activity than monomeric rutin. Pycnoporus laccase and Suberase® oligorutins led to an inhibition of COX-2 of about 35% and 70%, respectively, while monomeric rutin showed a near-negligible inhibition effect, less than about 10%. The best results on MMP-3 activity were obtained with rutin oligomers from P. sanguineus IMB W006-2 laccase and Suberase® with about 70–75% inhibition

Background Cellobiose dehydrogenase (CDH) is an extracellular hemoflavoenzyme produced by lignocellulose-degrading fungi including Pycnoporus cinnabarinus. We investigated the cellulolytic system of P. cinnabarinus, focusing on the involvement of CDH in the deconstruction of lignocellulosic biomass. Results First, P. cinnabarinus growth conditions were optimized for CDH production. Following growth under cellulolytic conditions, the main components secreted were cellulases, xylanases and CDH. To investigate the contribution of P. cinnabarinus secretome in saccharification processes, the Trichoderma reesei enzymatic cocktail was supplemented with the P. cinnabarinus secretome. A significant enhancement of the degradation of wheat straw was observed with (i) the production of a large amount of gluconic acid, (ii) increased hemicellulose degradation, and (iii) increased overall degradation of the lignocellulosic material. P. cinnabarinus CDH was heterologously expressed in Pichia pastoris to obtain large amounts of pure enzyme. In a bioreactor, the recombinant CDH (rCDH) expression level reached 7800 U/L. rCDH exhibited values of biochemical parameters similar to those of the natural enzyme, and was able to bind cellulose despite the absence of a carbohydrate-binding module (CBM). Following supplementation of purified rCDH to T. reesei enzymatic cocktail, formation of gluconic acid and increased hemicellulose degradation were observed, thus confirming the previous results observed with P. cinnabarinus secretome. Conclusions We demonstrate that CDH offers an attractive tool for saccharification process enhancement due to gluconic acid production from raw lignocellulosic material.

The effect of a pretreatment consisting of steam explosion (SE) followed by a laccase mediator system (LMS) stage on Eucalyptus globulus kraft pulping has been evaluated and compared with fungal pretreatments. Pretreatment with SE and LMS was more efficient than pretreatments using Pycnoporus sanguineus and Trametes sp. I-62. Steam explosion not only improved the enzyme penetration into the wood chips and shortened the pulping process by 60%, but also extracted around 50% of the hemicelluloses which could be converted into value-added products. The optimal conditions for the LMS treatment were 3 h, 3 UA/g and 40 °C. Compared to SE, the SE/LMS treatment yielded an increase in delignification of 13.9% without affecting pulp properties, provided a similar screened kraft yield, and reduced consumption of chemical reagents Na 2 S and NaOH by 11.5% and 6.3%, respectively. Therefore, SE/LMS is a promising pretreatment for converting the pulp mill into a forest bio-refinery.

Flax soda/AQ pulps were treated with different fungal laccase-mediator combinations followed by physical and chemical characterization of the pulps to obtain a thorough understanding of the laccase/mediator effects on hexenuronic acid (HexA) removal and the coupling of mediator onto pulps for fiber functionalization. Large differences were found and the presence of lauryl gallate (LG) during Trametes villosa laccase (TvL) treatment (TvL+LG) resulted in a much larger reduction of pulp-linked HexA than the combination of p-coumaric acid (PCA) and Pycnoporus cinnabarinus laccase (PcL). A major portion of LG became attached to the pulp as revealed by an increase in the kappa number and further confirmed by thioacidolysis and (1)H NMR analysis of solubilized pulp fractions. Additional experiments with other chemical pulps and isolated pulp xylan and lignin revealed that HexA seems to be the sole pulp component attacked by TvL+LG. As a substrate for TvL, the reaction preference order is PCAHexALG.

The laccases of Pycnoporus cinnabarinus and Myceliophthora thermophila are extracellular enzymes with high protein stability. They were used for the 'one pot' synthesis of azole derivatives from 1-aminobenzotriazole together with the p-dihydroxylated laccase substrates 2,5-dihydroxybenzoic acid methyl ester and 2,5-dihydroxybenzoic acid ethyl ester. The reactions yielded heteromolecular dimers (in yields of up to 34%). Methanol was used as the co-solvent to determine the influence of solvent concentration on the course of reaction. The resulting products were isolated, structurally characterized and tested for their antibacterial, antifungal and cytotoxic activities. The products showed low antimicrobial activity and low cytotoxicity compared with commercial available standard compounds but these variables exceeded those of the initial reactants used for the synthesis. In addition to the synthesis of heteromolecular dimers, oligomers were formed and structurally characterized by LC/MS (liquid chromatography/MS).

The aim of this work was to obtain a LMS pre-treatment applicable to industrial TCF bleaching. Kraft pulp from Eucalyptus globulus was treated at 40 °C/pH 3 and 60 °C/pH 5 for 1 h using an extracellular fluid enriched in laccase produced by Pycnoporus sanguineus and acetosyringone as mediator (HBT was used as a control mediator) (L). Alkaline extraction (E) and hydrogen peroxide (P) stages were then assayed. The LEP alternative was an efficient sequence to bleach kraft pulp since the enzymatic pre-treatment boosted the subsequent chemical bleaching. The best L pre-treatment was obtained with laccase-acetosyringone at 40 °C/pH 3. It reduces kappa number and hexenuronic acids, increases pulp viscosity, lowers hydrogen peroxide consumption down to an 87.4% (94.0% without L) and enhances brightness up to a 59% ISO (51% ISO without L). © 2009 Elsevier Ltd.

Aims: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin-processing sector. Methods and Results: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68·7–97·5% similarity with other Polyporale laccases. The three laccases (59·5–62·9 kDa with 7–10% carbohydrate content) had high redox potentials (0·72–0·75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75–78°C and at pH 5–7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase-1-hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. Conclusions: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo- and pH stability, catalytic efficiency towards 2,2′-azino-bis-[3-ethylthiazoline-6-sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. Significance and Impact of the Study: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale-up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor-made enzymes.

International audience; Pycnoporus cinnabarinus laccase was fused to the C-terminal linker and carbohydrate binding module (CBM) of Aspergillus niger cellobiohydrolase B (CBHB). The chimeric enzyme of molecular mass 100 kDa was successfully produced in A. niger. Laccase-CBM was further purified to determine its main biochemical properties. The Michaelis-Menten constant and pH activity profile were not modified, but the chimeric enzyme was less thermostable than either the P. cinnabarinus laccase or the recombinant laccase produced in the same strain. Laccase-CBM was able to bind to a cellulosic substrate and, to a greater extent, to softwood kraft pulp. Binding to the pulp was shown to be mainly time and temperature-dependent. Laccase-CBM was further investigated for its softwood kraft pulp biobleaching potential and compared with the P. cinnabarinus laccase. Addition of a CBM was shown to greatly improve the delignification capabilities of the laccase in the presence of 1-hydroxybenzotriazole (HBT). In addition, ClO2 reduction using 5 U of chimeric enzyme per gram of pulp was almost double than that observed using 20 U of P. cinnabarinus laccase per gram of pulp. We demonstrated that conferring a carbohydrate binding capability to the laccase could significantly enhance its biobleaching properties

Laccases have numerous biotechnological applications, among them food processing. The widespread use of laccases has increased the demand for an inexpensive and safe source of recombinant enzyme. We explored the use of a rice-based system for the production of two fungal laccases derived from the ascomycete Melanocarpus albomyces and the basidiomycete Pycnoporus cinnabarinus. High-expression levels of active recombinant laccases were achieved by targeting expression to the endosperm of rice seeds. The laccase cDNAs were fused to a plant-derived signal sequence for targeting to the secretory pathway, and placed under the control of a constitutive seed-specific promoter fused to an intron for enhanced expression. This construct enabled the recovery of on average 0.1–1% of soluble laccase in total soluble proteins (TSP). The highest yields of recombinant laccases obtained in rice seeds were 13 and 39 ppm for riceMaL and ricePycL, respectively. The rice-produced laccases were purified and characterized. The wild-type and the recombinant proteins showed similar biochemical features in terms of molecular mass, pI, temperature and optimal pH and the N-terminus was correctly processed. Although presenting lower kinetic parameters, the rice-produced laccases were also suitable for the oxidative cross-linking of a food model substrate [maize-bran feruloylated arabinoxylans (AX)].

Pycnoporus strains were used as model to understand the role of laccases in the in vivo decolourisation of three anthraquinonic dyes. The decolourisation capability of Pycnoporus sanguineus MUCL 41582 (PS7), which produces laccases as the main oxidative enzyme, was assayed and compared with the decolourisation capability of a control strain, Pycnoporus cinnabarinus MUCL 39533 (PC330) described as laccase-deficient strain. In absence of dye, laccase activity was observed during the trophophase and the idiophase with PS7, while no laccase activity was observed with PC330. Acid Blue 62 (ABu62), Acid Blue 281 (ABu281) and Reactive Blue 19 (RBu 19) caused an increase in laccase activity and surprisingly laccase activity was detected with PC330. In vitro, oxidation of all three anthraquinones by a laccase preparation was obtained to a lesser extent than the whole cell process; suggesting that other factor(s) could be required for a complete decolourisation. As the time space of laccase production in the tested fungi was not perfectly coincidental with the decolourisation process, the activity of cellobiose dehydrogenase (CDH) was monitored. Present early in the broth during the growth of the fungi, CDH displayed in vitro a synergism with laccases in the decolourisation of ABu62, and an antagonism with laccases in the decolourisation of ABu281 and RBu19. (c) 2006 Elsevier Inc. All rights reserved.

International audience; AIMS: Laccase production by the monokaryotic strain Pycnoporus cinnabarinus ss3 was studied using ethanol as inducer in the culture medium. METHODS AND RESULTS: The effect of ethanol was tested at 10, 20, 30, 35 and 45 g l-1 and compared with that of ferulic acid, known until now as the most efficient inducer for laccase expression by P. cinnabarinus ss3. In the presence of 35 g l-1 ethanol, laccase activity (266 600 U l-1) and productivity (19 000 U l-1 day-1) were nine and fivefold higher compared with ferulic acid-induced cultures, and 155- and 65-fold higher compared with non-induced cultures, respectively. In vivo, ethanol added to the culture medium of P. cinnabarinus ss3 favoured a continuous and high expression of laccase gene. Under these conditions, P. cinnabarinus ss3 produced preferentially the isoenzyme LAC I. Ethanol added in vitro to the purified P. cinnabarinus ss3 laccase typically inhibited the enzymatic activity. CONCLUSIONS: In spite of an initial inhibitory effect on mycelial growth, ethanol was shown to be a very strong inducer for laccase expression by P. cinnabarinus ss3 allowing an average yield of 1-1.5 g l-1 laccase. SIGNIFICANCE AND IMPACT OF THE STUDY: This study identified P. cinnabarinus ss3 as an outstanding producer of laccase in the presence of ethanol as inducer. Ethanol is an inexpensive agricultural by-product and the process is simple to scale-up for industrial production.

The production of laccase, an enzyme of industrial interest, was screened among species of the genus Pycnoporus, in particular P. sanguineus. Strains were isolated from various tropical Chinese environments and phylogenetically compared to ones deposited in international collections. Molecular clustering, based on ribosomal ITS1–5.8S-ITS2 genomic sequence analysis, showed that the Chinese strains of P. sanguineus formed an homogeneous phylogenetic group distinguished by its laccase-overproducing character. The dikaryotic strain P. sanguineus G05 was selected for its ability to produce up to 40000 U 1 −1 laccase in the presence of 2,5-xylidine, Tween 80 and maize bran. Since fruit bodies of P. sanguineus could be formed in the laboratory, monokaryotic laccase-hyperproducing strains were isolated using classic genetical methods. Among these isolates, strain G05.10 synthesized up to 71 000 U 1 −1 laccase, with a productivity of 5069 U 1 −1 d −1 . The laccase was purified and identified as a 70 kDa protein with an acidic pI, and was very stable at high temperatures.

International audience; Pyncnoporus cinnabarinus (Polyporaceae) is able to produce methylanthranilate in liquid cultures. Study of the culture conditions of P. cinnabarinus IP I-937 has permitted increase in the aroma productivity by a factor of 16. A low nitrogen concentration, with maltose as carbon source, was required; the culture pH was uncontrolled. The inoculum nature and concentration greatly influence on production: best results were obtained with conidia from a late harvest, used at a rate of 2 × 105 spores/ml. Under these conditions, 18.7 mg methylanthranilate/l was produced after 5 days of culture. Aroma production is probably connected with the biosynthesis of phenoxazinones, which are characteristic pigments of the genus Pycnoporus.