Search

Infected abscesses are walled-off collections of pus and bacteria. They are a common sequela of complications in the setting of surgery, trauma, systemic infections, and other disease states. Current treatment is typically limited to antibiotics with long-term catheter drainage, or surgical wash-out when inaccessible to percutaneous drainage or unresponsive to initial care efforts. Antibiotic resistance is also a growing concern. Although bacteria can develop drug resistance, they remain susceptible to thermal and mechanical damage. In particular, short pulses of focused ultrasound (i.e., histotripsy) generate mechanical damage through localized cavitation, representing a potential new paradigm for treating abscesses non-invasively, without the need for long-term catheterization and antibiotics. In this pilot study, boiling and cavitation histotripsy treatments were applied to subcutaneous and intramuscular abscesses developed in a novel porcine model. Ultrasound imaging was used to evaluate abscess maturity, for treatment monitoring and assessment of post-treatment outcomes. Disinfection was quantified by counting bacteria colonies from samples aspirated before and after treatment. Histopathological evaluation of the abscesses was performed to identify changes resulting from histotripsy treatment and potential collateral damage. Cavitation histotripsy was more successful in reducing the bacterial load while having a smaller treatment volume compared with boiling histotripsy. The results of this pilot study suggest focused ultrasound may lead to a technology for in situ treatment of acoustically accessible abscesses.

Abscesses are walled-off collections of infected fluids that often develop as complications in the setting of surgery and trauma. Treatment is usually limited to percutaneous catheterization with a course of antibiotics. As an alternative to current treatment strategies, a histotripsy approach was developed and tested in a novel porcine animal model. The goal of this article is to use advanced ultrasound imaging modes to extract sonographic features associated with the progression of abscess development in a porcine model. Intramuscular or subcutaneous injections of a bi-microbial bacteria mixture plus dextran particles as an irritant led to identifiable abscesses over a 2 to 3 wk period. Selected abscesses were imaged at least weekly with B-mode, 3-D B-mode, shear-wave elastography and plane-wave Doppler imaging. Mature abscesses were characterized by a well-defined core of varying echogenicity surrounded by a hypoechoic capsule that was highly vascularized on Doppler imaging. 3-D imaging demonstrated the natural history of abscess morphology, with the abscess becoming less complex in shape and increasing in volume. Furthermore, shear-wave elastography demonstrated variations in stiffness as phlegmon becomes abscess and then liquefies, over time. These ultrasound features potentially provide biomarkers to aid in selection of treatment strategies for abscesses.

Abscesses are walled-off collections of infected fluids that often develop as complications in the setting of surgery and trauma. Abscess care depends on size, location, composition and complexity, among other patient factors. The goal of this work is to describe, using the latest ultrasound imaging technologies, the progression of abscess development in a porcine animal model. Intramuscular or subcutaneous injections of bacteria plus dextran particles as an irritant led to identifiable abscesses over a 2- to 3-week period. The abscesses were imaged at least weekly with B-mode, 3D B-mode, shear-wave elastography (SWE) and color flow imaging. Mature abscesses were characterized by a well-defined core of varying echogenicity surrounded by a hypoechoic capsule that was highly vascularized on Doppler imaging. Size and shape changes during development were quantified with 3D imaging. With SWE, the lesion stiffness varied interiorly and generally decreased over time. These ultrasound features potentially provide biomarkers to facilitate improved selection of treatment strategies for abscesses.

Infected abscesses are walled-off collections of pus and bacteria. They are a common sequela of complications in the setting of surgery, trauma, systemic infections, and other disease states. Current treatment is typically limited to antibiotics with long-term catheter drainage, or surgical wash-out when inaccessible to percutaneous drainage or unresponsive to initial care efforts. Antibiotic resistance is also a growing concern. Although bacteria can develop drug resistance, they remain susceptible to thermal and mechanical damage. In particular, short pulses of focused ultrasound (i.e., histotripsy) generate mechanical damage through localized cavitation, representing a potential new paradigm for treating abscesses non-invasively, without the need for long-term catheterization and antibiotics. In this pilot study, boiling and cavitation histotripsy treatments were applied to subcutaneous and intramuscular abscesses developed in a novel porcine model. Ultrasound imaging was used to evaluate abscess maturity, for treatment monitoring and assessment of post-treatment outcomes. Disinfection was quantified by counting bacteria colonies from samples aspirated before and after treatment. Histopathological evaluation of the abscesses was performed to identify changes resulting from histotripsy treatment and potential collateral damage. Cavitation histotripsy was more successful in reducing the bacterial load while having a smaller treatment volume compared with boiling histotripsy. The results of this pilot study suggest focused ultrasound may lead to a technology for in situ treatment of acoustically accessible abscesses.

Abscesses are walled-off collections of infected fluids most often treated with percutaneous drains placed under CT guidance. Complications such as clogged drains or secondary infections require rehospitalization and wound management. Histotripsy treatment has the potential to eliminate the need for long term catheterization and antibiotics. The progression of abscess development has yet to be fully described. The objective of this study was to use the latest advances in non-contrast ultrasound technologies to characterize abscess development in a porcine animal model. Intramuscular or subcutaneous injections of bacteria plus dextran particles as an irritant led to identifiable abscesses over a 2- to 3-week period. Ultrasound imaging was performed at least weekly, in some cases with a 3D tracking device that provided quantifiable size and shape measurements. Abscess progression was also measured with a plane-wave Doppler mode providing increased sensitivity to low-velocity flows, while abscess stiffness was quantified using shear wave elastography. Most of the mature abscesses were characterized by a rounded core of varying echogenicity surrounded by a hypoechoic capsule that was highly vascularized on Doppler imaging. A treatable abscess was defined by its hypervascular rim and avascular core. Stiffness varied within the abscess but generally decreased over time. Abscess echogenicity, shape, stiffness and vascularity potentially provide features to identify lesions suitable for treatment.

Abscesses are walled-off collections of infected fluids containing pus and bacteria. They are often treated with percutaneous drainage in which a drainage catheter may be sutured in place for up to several weeks. Complications such as clogged drains or secondary infections require rehospitalization and wound management. Bacteria are susceptible to mechanical damage, and thus we hypothesize that histotripsy may be a potential new paradigm for treating abscesses noninvasively, without the need for long term catheterization and antibiotics. We developed a porcine animal model that recapitulates some of the features of human abscesses (including size and loculations). Boiling and cavitation histotripsy treatments were applied to subcutaneous and intramuscular abscesses in this porcine model. Ultrasound imaging was used to evaluate abscess maturity, for treatment monitoring and assessment of post-treatment outcomes. Disinfection was quantified by counting bacteria colonies from samples aspirated before and after treatment. Histopathological evaluation of the abscesses was performed to identify changes resulting from histotripsy treatment and potential collateral damage. The results of this pilot study suggest focused ultrasound may lead to a technology for in situ treatment of acoustically accessible abscesses.

We have developed a duplex ultrasound simulator for training and assessment of scanning skills. We used the simulator to test examiner performance in the measurement of flow velocities in dialysis access fistulas. Test cases were created from three-dimensional (3D) ultrasound scans of two dialysis access fistulas by reconstructing 3D blood vessel models and simulating blood flow velocity fields within the lumens. The simulator displays a two-dimensional B-mode or color Doppler image corresponding to transducer position on a mannequin; a spectral waveform is generated according to Doppler sample volume location and system settings. Examiner performance was assessed by comparing the measured peak systolic velocity (PSV) with the true PSV provided by the computational flow model. The PSV measured by four expert examiners deviated from the true value by 7.8 ± 6.1%. The results demonstrate the ability of the simulator to objectively assess an examiner’s measurement accuracy in complex vascular targets.

Objective:We developed a duplex ultrasound simulator and used it to assess accuracy of volume flow measurements in dialysis access fistula (DAF) models.Methods:The simulator consists of a mannequin, computer, and mock transducer. Each case is built from a patient’s B-mode images that are used to create a 3-dimensional surface model of the DAF. Computational fluid dynamics is used to determine blood flow velocities based on model vessel geometry. The simulator displays real-time B-mode and color-flow images, and Doppler spectral waveforms are generated according to user-defined settings. Accuracy was assessed by scanning each case and measuring volume flow in the inflow artery and outflow vein for comparison with true volume flow values.Results:Four examiners made 96 volume flow measurements on four DAF models. Measured volume flow deviated from the true value by 35 ± 36%. Mean absolute deviation from true volume flow was lower for arteries than veins (22 ± 19%, N = 48 vs. 58 ± 33%, N = 48, p < 0.0001). This finding is attributed to eccentricity of outflow veins which resulted in underestimating true cross-sectional area. Regression analysis indicated that error in measuring cross-sectional area was a predictor of error in volume flow measurement (β = 0.948, p < 0.001). Volume flow error was reduced from 35 ± 36% to 9 ± 8% ( p < 0.000001) by calculating vessel area as an ellipse.Conclusions:Duplex volume flow measurements are based on a circular vessel shape. DAF inflow arteries are circular, but outflow veins can be elliptical. Simulation-based analysis showed that error in measuring volume flow is mainly due to assumption of a circular vessel.

A camera-based imaging system was previously developed for mapping venous blood oxygenation in human skin. However, several limitations were realized in later applications, which could lead to either significant bias in the estimated oxygen saturation value or poor spatial resolution in the map of the oxygen saturation. To overcome these issues, an upgraded system was developed using improved modeling and image processing algorithms. In the modeling, Monte Carlo (MC) simulation was used to verify the effectiveness of the ratio-to-ratio method for semi-infinite and two-layer skin models, and then the relationship between the venous oxygen saturation and the ratio-to-ratio was determined. The improved image processing algorithms included surface curvature correction and motion compensation. The curvature correction is necessary when the imaged skin surface is uneven. The motion compensation is critical for the imaging system because surface motion is inevitable when the venous volume alteration is induced by cuff inflation. In addition to the modeling and image processing algorithms in the upgraded system, a ring light guide was used to achieve perpendicular and uniform incidence of light. Cross-polarization detection was also adopted to suppress surface specular reflection. The upgraded system was applied to mapping of venous oxygen saturation in the palm, opisthenar and forearm of human subjects. The spatial resolution of the oxygenation map achieved is much better than that of the original system. In addition, the mean values of the venous oxygen saturation for the three locations were verified with a commercial near-infrared spectroscopy system and were consistent with previously published data.

Physician-modified endovascular grafts (PMEGs), with fenestrations added to accommodate major branch vessels, provide a means for endovascular treatment of juxta-renal abdominal aortic aneurysms. Manual measurements of vessel origin locations from computed tomography images, however, take time and can lead to errors in the positions of the fenestrations. To make the fenestration process faster and more accurate, we have developed a procedure to create custom templates that serve as patient-specific guides for graft fenestration. We use a three-dimensional printer to create a clear rigid sleeve that replicates the patient’s aorta and includes holes placed precisely at the locations of the branch vessels. The sleeve is placed over the graft, the locations of the openings are marked with a sterile pen, and the fenestrations are created after the sleeve is removed. Custom fenestration templates can potentially save procedural costs and make minimally invasive aortic aneurysm repair available to many more patients. This chapter summarizes the 3D printing applications to create models for preoperative planning of PMEGs.

A method of non-contact mapping of venous oxygen saturation (SvO 2 ) is presented. A CCD camera is used to image skin tissue illuminated alternately by a red (660 nm) and an infrared (800 nm) LED light source. Low cuff pressures of 30–40 mmHg are applied to induce a venous blood volume change with negligible change in the arterial blood volume. A hybrid model combining the Beer–Lambert law and the light diffusion model is developed and used to convert the change in the light intensity to the change in skin tissue absorption coefficient. A simulation study incorporating the full light diffusion model is used to verify the hybrid model and to correct a calculation bias. SvO 2 in the fingers, palm, and forearm for five volunteers are presented and compared with results in the published literature. Two-dimensional maps of venous oxygen saturation are given for the three anatomical regions.

Ultrasonographic (US) assessment of abdominal aortic aneurysms is typically performed by measuring maximal aneurysm diameter from two-dimensional images. These measurements are prone to inaccuracies owing to image planes and interobserver variability. The purpose of this study was to compare the variability in diameter, cross-sectional area (CSA), and volume measurements of abdominal aortic aneurysms obtained using a three-dimensional (3D) US imaging system with those obtained using computed tomographic (CT) angiography, and to determine the reliability of these measures.Seven patients in whom endovascular aneurysm repairs were performed underwent CT angiography in addition to a 3D US scan. Measurements computed using 3D surface reconstructions of CT and 3D US scans included maximum diameter, CSA, and aneurysm volume. The seven matched CT and 3D US scans were compared at baseline and 6 to 8 weeks later.The average aneurysm measured 57.2 mm on CT and 56.2 mm on US (P = 0.14). Correlation coefficients for diameter, CSA, and volume were 0.88, 0.90, and 0.93, respectively (all P values0.001). A Bland-Altman analysis demonstrated a strong agreement between 92% of the diameter, 96.4% of the CSA, and 100% of the volume measurements. The interrater reliability was remarkably high comparing the modalities (CT vs. US), and ranged from 0.934 to 0.997 for single measurements and 0.965 to 0.998 for all measurements together; moreover, there was a strong reliability when the tests were reviewed 6 to 8 weeks later, with a reliability of 0.962 to 0.998 for single measurements and 0.992 to 0.999 for all tests (all P values0.001).The 3D US is an accurate and noninvasive method of determining aneurysm size and geometry that is reproducible. Volumetric measurements may represent a significant advancement in long-term follow-up after endovascular aneurysm repair.

Objective: Duplex ultrasound scanning with B-mode imaging and both color Doppler and Doppler spectral waveforms is relied upon for diagnosis of vascular pathology and selection of patients for further evaluation and treatment. In most duplex ultrasound applications, classification of disease severity is based primarily on alterations in blood flow velocities, particularly the peak systolic velocity (PSV) obtained from Doppler spectral waveforms. We developed a duplex ultrasound simulator for training and assessment of scanning skills. Methods: Duplex ultrasound cases were prepared from 2-dimensional (2D) images of normal and stenotic carotid arteries by reconstructing the common carotid, internal carotid, and external carotid arteries in 3 dimensions and computationally simulating blood flow velocity fields within the lumen. The simulator displays a 2D B-mode image corresponding to transducer position on a mannequin, overlaid by color coding of velocity data. A spectral waveform is generated according to examiner-defined settings (depth and size of the Doppler sample volume, beam steering, Doppler beam angle, and pulse repetition frequency or scale). The accuracy of the simulator was assessed by comparing the PSV measured from the spectral waveforms with the true PSV which was derived from the computational flow model based on the size and location of the sample volume within the artery. Results: Three expert examiners made a total of 36 carotid artery PSV measurements based on the simulated cases. The PSV measured by the examiners deviated from true PSV by 8% ± 5% (N = 36). The deviation in PSV did not differ significantly between artery segments, normal and stenotic arteries, or examiners. Conclusion: To our knowledge, this is the first simulation of duplex ultrasound that can create and display real-time color Doppler images and Doppler spectral waveforms. The results demonstrate that an examiner can measure PSV from the spectral waveforms using the settings on the simulator with a mean absolute error in the velocity measurement of less than 10%. With the addition of cases with a range of pathologies, this duplex ultrasound simulator will be a useful tool for training health-care providers in vascular ultrasound applications and for assessing their skills in an objective and quantitative manner.

The association between ambient fine particulate matter (PM) air pollution [particles with aerodynamic diameter ≤ 2.5 μm (PM2.5)] and increased cardiovascular morbidity and mortality in epidemiologic studies (Dominici et al. 2006; Miller et al. 2007; Pope et al. 2002) has led to investigation of underlying mechanisms, which remain cryptic (Bhatnagar 2006). Several studies link ambient (especially combustion-derived) PM with increased vascular tone (Brook et al. 2002; Campen et al. 2005; Proctor et al. 2006), and animal studies showed possible involvement of sympathetic nervous system activation (Proctor et al. 2006) and vasoconstriction pathways (Bouthillier et al. 1998; Li et al. 2005). Evidence suggests that the effect of PM on vascular reactivity may be greater in individuals at risk for coronary artery disease (O’Neill et al. 2005). Human studies to date have provided limited insight into the mechanism of the vascular effects of PM, although recent evidence has documented enhanced exercise-induced ischemia with controlled exposure to diesel exhaust (DE) (Mills et al. 2007). DE is a complex mixture of particulate and gaseous pollutants that comprise a substantial and biologically active fraction of urban ambient air pollution (Health Effects Institute 1995) and is a very appropriate experimental model exposure, especially with the current interest in traffic-related air pollution. Evidence suggests that inhalation of DE is associated with perturbation in endothelial function (Campen et al. 2005; Mills et al. 2005; Tornqvist et al. 2007). We exposed young adults, healthy or with metabolic syndrome, to DE under controlled settings. Young adults with metabolic syndrome have increased subclinical atherosclerosis (Tzou et al. 2005) and are at increased risk for cardiovascular morbidity and mortality (Isomaa et al. 2001). We focused on individuals with metabolic syndrome because they might be more susceptible to DE effects. We hypothesized that DE inhalation would result in vaso-constriction and decreased endothelium-dependent flow-mediated dilation (FMD) of the brachial artery within 30 min of exposure. We also hypothesized that vascular effects of DE might be related to activation of the sympathetic nervous system or increased release of the endothelium-dependent vasoconstrictor endothelin-1 (ET-1).

Women who develop preeclampsia have a higher risk of future cardiovascular disease and diabetes compared to women who have uncomplicated pregnancies. We hypothesized that women with prior preeclampsia would have increased visceral adiposity that would be a major determinant of their metabolic and cardiovascular risk factors.We compared intraabdominal fat (IAF) area, insulin sensitivity index (SI), fasting lipids, low-density lipoprotein relative flotation rate, and brachial artery flow-mediated dilatation in 49 women with prior preeclampsia and 22 controls who were at least 8 months postpartum and matched for age, parity, body mass index, and months postpartum. Women were eligible if they did not smoke tobacco, use hormonal contraception, have chronic hypertension, or have a history of gestational diabetes.The groups were similar for age (mean ± SD: prior preeclampsia 33.4 ± 6.6 vs control 34.6 ± 4.3 years), parity (median: 1 for both), body mass index (26.7 ± 5.9 vs 24.0 ± 7.3 kg/m(2)), and months postpartum (median [25th-75th percentile]: 16 [13-38] vs 16.5 [13-25]). There were no significant differences in IAF area and SI. Despite this, women with preeclampsia had lower high-density lipoprotein (46.0 ± 10.7 vs 51.3 ± 9.3 mg/dL; P.05), smaller/denser low-density lipoprotein relative flotation rate (0.276 ± 0.022 vs 0.289 ± 0.016; P = .02), higher systolic (114.6 ± 10.9 vs 102.3 ± 7.5 mm Hg) and diastolic (67.6 ± 7.5 vs 60.9 ± 3.6 mm Hg; P.001) blood pressures, and impaired flow-mediated dilatation (4.5 [2-6.7] vs 8.8 [4.5-9.1] percent change, P.05) compared to controls. In a subgroup analysis, women with nonsevere preeclampsia (n = 17) had increased IAF (98.3 [60.1-122.2]) vs 63.1 [40.1-70.7] cm(2); P = .02) and decreased SI (4.18 [2.43-5.25] vs 5.5 [3.9-8.3] × 10(-5) min(-1)/pmol/L; P = .035) compared to the controls, whereas women with severe preeclampsia (n = 32) were not different for IAF and SI. IAF was negatively associated with SI and positively associated with cardiovascular risk factors even after adjusting for the matching variables and total body fat.Women with prior preeclampsia have an atherogenic lipid profile and endothelial dysfunction compared to matched control subjects despite having similar adiposity and insulin sensitivity, suggesting that there are mechanisms separate from obesity and insulin resistance that lead to their cardiovascular risk factors. Visceral adiposity may have a role in contributing to these risk factors in the subgroup of women who have preeclampsia without severe features.

The attachment sites of lower extremity bypass grafts are known to exhibit a wide range of geometries. Factors that determine the geometry of a given anastomosis include graft material, graft site, native vessel size, graft size and individual patient anatomy. Therefore, it is difficult to specify a standard anastomosis geometry before surgery and difficult to predict the effect of the geometry on long-term graft patency. We have used 3-D ultrasound imaging to study 46 proximal anastomoses of lower limb bypass grafts. We have developed methods to characterize the 3-D geometry of the anastomosis in terms of component sizes and angles. These detailed geometric measurements describe a range of anastomosis geometries and establish standardized parameters across cases that can be used to relate anastomosis geometry to outcome.

A phantom has been developed to quickly calibrate a freehand 3-D ultrasound (US) imaging system. Calibration defines the spatial relationship between the US image plane and an external tracking device attached to the scanhead. The phantom consists of a planar array of strings and beads, and a set of out-of-plane strings that guide the user to proper scanhead orientation for imaging. When an US image plane is coincident with the plane defined by the strings, the calibration parameters are calculated by matching of homologous points in the image and phantom. The resulting precision and accuracy of the 3-D imaging system are similar to those achieved with a more complex calibration procedure. The 3-D reconstruction performance of the calibrated system is demonstrated with a magnetic tracking system, but the method could be applied to other tracking devices.

Objective: Remodeling of vein grafts in the lower limb can lead to stenotic lesions that threaten long-term graft patency. Progressive changes in vein graft geometry were measured at sites of repaired stenoses with three-dimensional (3D) ultrasound imaging. Methods: Ten vein graft revisions with patch angioplasty were followed up for 31 to 47 weeks. Four revisions were at valve sites, and six were at sites of diffuse intimal hyperplasia. Sets of spatially registered two-dimensional (2D) cross-sectional ultrasound images were assembled to create 3D computer models of each vein graft. Cross-sectional area measurements in planes normal to the vessel center axis were calculated from the 3D surface reconstructions. Data sets from serial studies were registered in a common coordinate system, and cross-sectional area measurements were compared at matched sites. Results: Three of the four vein graft revisions at valve sites changed by less than 18%, and one decreased in cross-sectional area by 61%. Five of the six revisions at sites of diffuse intimal hyperplasia demonstrated significant decreases in lumen area ranging from 26% to 61%, and one revision exhibited no significant change in cross-sectional area. Reproducibility of the cross-sectional area measurements derived from the 3D imaging technique was 6.9%. Conclusions: Sequential area measurements from 3D ultrasound scans demonstrated different remodeling patterns and rates of change among revision sites within the vein grafts. Lumen narrowing documented with 3D scanning was not associated with consistent flow velocity changes on conventional duplex graft surveillance scans. (J Vasc Surg 2003;37:798-807.)

Physician-modified endovascular grafts, with fenestrations added to accommodate major branch vessels, provide a means for endovascular treatment of abdominal aortic aneurysms that are adjacent to the renal arteries. Manual measurements of vessel origin locations from computed tomography images, however, take time and can lead to errors in the positions of the fenestrations. To make the fenestration process faster and more accurate, we have developed a procedure to create custom templates that serve as patient-specific guides for graft fenestration. We use a three-dimensional printer to create a clear rigid sleeve that replicates the patient's aorta and includes holes placed precisely at the locations of the branch vessels. The sleeve is slipped over the graft, the locations of the openings are marked with a pen, and the fenestrations are created after the sleeve is removed. Custom fenestration templates can potentially save procedural costs and make minimally invasive aortic aneurysm repair available to more patients.

Accurate measurement of left-ventricular (LV) volume and function are important to monitor disease progression and assess prognosis in patients with heart disease. Existing methods of three-dimensional (3-D) imaging of the heart using ultrasound have shown the potential of this modality, but each suffers from inherent restrictions which limit its applicability to the full range of clinical situations. The authors have developed a technique for image acquisition using a magnetic-field system to track the 3-D echocardiographic imaging planes and 3-D image analysis software including the piecewise smooth subdivision method for surface reconstruction. The technique offers several advantages over existing methods of 3-D echocardiography. The results of validation using in vitro LV's show that the technique allows accurate measurement of LV volume and anatomically accurate 3-D reconstruction of LV shape and is, therefore, suitable for analysis of regional as well as global function.

Three-dimensional echocardiography has demonstrated superiority over two-dimensional techniques in the determination of left ventricular mass and volumes. We describe a technique based on a magnetic tracking system which provides rapid three-dimensional image acquisition from multiple acoustic windows. Interactive three-dimensional border tracing and reconstruction with a piecewise smooth subdivision model accurately reproduced phantom volume (calculated volume = 1.00 true volume – 0.6 ml, r = 1.000, standard error of the estimate = 1.3 ml), in vitro heart volume (calculated volume = 1.02 true volume – 1.3 ml, r = 1.000, standard error of the estimate = 0.4 ml), in vitro heart mass (calculated mass = 0.98 true mass + 1.4 gm, r = 0.998, standard error of the estimate = 2.5 gm), and in vivo stroke volume (calculated stroke volume = 1.18 Doppler stroke volume – 17.9 ml, r = 0.990, standard error of the estimate = 2.8 ml). The three-dimensional in vivo data sets, which include views from three acoustic windows, were acquired in less than 90 seconds. We conclude that this method of three-dimensional echocardiographic data acquisition and analysis overcomes limitations inherent in currently available systems. (J Am Soc Echocardiogr 1997;10:830-9.)

BACKGROUND & AIMS: Three-dimensional (3D) ultrasound imaging of the total stomach volume has not yet been achieved. The aim of this study was to investigate whether a magnetic position sensor system for acquisition of 3D ultrasonograms could be used to determine gastric emptying rates and intragastric distribution. METHODS: A system for position and orientation measurement was interfaced to an ultrasound scanner. In vitro accuracy was evaluated by scanning a porcine stomach. Fourteen volunteers, with a median age of 35 years, were scanned fasting and postcibally by two-dimensional (2D) and 3D ultrasound after ingesting a 500-mL soup meal. RESULTS: This 3D system yielded a strong correlation (r = 0.997) between true and estimated volumes in vitro. The limits of agreement were -9.1:70.1 mL in the volume range 1200-1900 mL. The intersubject variability of the total gastric volumes ranged from 12.5% to 46.0%, less than for antral area variability. The average half-emptying time was 22.1 +/- 3.8 minutes. Intragastric distribution of the meal, expressed as proximal distal volume, varied on average from 3.6 +/- 2.1 (5 minutes postpradially) to 2.7 +/- 1.9 (30 minutes postprandially). CONCLUSIONS: This 3D ultrasound system using magnetic scanhead tracking showed excellent in vitro accuracy, calculated gastric emptying rates more precisely than by 2D ultrasound, and enabled estimation of intragastric distribution of a soup meal. (Gastroenterology 1997 Jul;113(1):38-49)

A miniature magnetic position sensor used for three-dimensional ultrasound imaging was tested for precision and accuracy in vitro. The sensor alone was able to locate points with root-mean-square (rms) uncertainty of 1.7 mm and accuracy of 0.05 +/- 0.62 mm over its specified operating range of 50 cm. With an ultrasound imaging system, a point was located from arbitrary viewing windows with 2.4-mm rms uncertainty and 0.06 +/- 0.68 mm accuracy. If viewing windows were limited to those representative of a typical ultrasound examination, the system could achieve rms uncertainty in point location of1 mm. Performance was not affected by operation of the imaging system when the sensor was mounted on an ultrasound scanhead. Sensitivity to metals in the operating environment was also measured.

Arteriovenous fistulae are created surgically to provide an adequate access for dialysis in patients with End-Stage Renal Disease (ESRD). Producing an autogenous shunt linking an artery and a vein in the peripheral circulation bypasses the high resistance capillary bed in order to provide the necessary flow rates at sites easily accessible for dialysis. It has long been recognized that hemodynamics constitute the primary external influence on the remodeling process of anastomosed vascular tissue [1, 2]. The high flow rate, together with the exposure of the venous tissue to the high arterial pressure, leads to a rapid process of wall remodeling that may lead to a mature access or end in failure. Recent hemodynamic simulations [3, 4] have computed very high viscous wall shear stresses within dialysis access fistulae; Stresses >15 Pa have been reported. These are much higher than what is typically considered normal or homeostatic (i.e. ≈ 1–1.5 Pa). The abnormal stresses in the fistulae have been hypothesized to cause pathological venous remodeling (i.e. intimal hyperplasia) which causes stenoses and threatens fistula patency. Given the high failure rate of dialysis access sites (up to 50% require surgical revision within one year), understanding the dynamics of blood flow within the fistula is a necessary step in understanding remodeling, and ultimately, in improving clinical outcomes.

Arteriovenous fistulae are created surgically to provide adequate access for dialysis patients suffering from end-stage renal disease. It has long been hypothesized that the rapid blood vessel remodeling occurring after fistula creation is in part a process to restore the mechanical stresses to some preferred level, i.e., mechanical homeostasis. The current study presents fluid–structure interaction (FSI) simulations of a patient-specific model of a mature arteriovenous fistula reconstructed from 3D ultrasound scans. The FSI results are compared with previously published data of the same model but with rigid walls. Ultrasound-derived wall motion measurements are also used to validate the FSI simulations of the wall motion. Very large time-averaged shear stresses, 10–15 Pa, are calculated at the fistula anastomosis in the FSI simulations, values which are much larger than what is typically thought to be the normal homeostatic shear stress in the peripheral vasculature. Although this result is systematically lower by as much as 50 % compared to the analogous rigid-walled simulations, the inclusion of distensible vessel walls in hemodynamic simulations does not reduce the high anastomotic shear stresses to “normal” values. Therefore, rigid-walled analyses may be acceptable for identifying high shear regions of arteriovenous fistulae.

Background: Duplex ultrasound with Doppler velocimetry is widely used to evaluate the presence and severity of internal carotid artery stenosis; however, a variety of velocity criteria are currently being applied to classify stenosis severity. The purpose of this study is to compare published Doppler velocity measurements to the severity of internal carotid artery stenosis as assessed by x-ray angiography in order to clarify the relationship between these 2 widely used approaches to assess carotid artery disease. Methods: Scatter diagrams or “scattergrams” of correlations between Doppler velocity measurements and stenosis severity as assessed by x-ray contrast angiography were obtained from published articles for native and stented internal carotid arteries. The scattergrams were graphically digitized, combined, and segmented into categories bounded by 50% and 70% diameter reduction. These data were combined and divided into 3 sets representing different velocity parameters: (1) peak systolic velocity, (2) end-diastolic velocity, and (3) the internal carotid artery to common carotid artery peak systolic velocity ratio. The horizontal axis of each scattergram was transformed to form a cumulative distribution function, and thresholds were established for the stenosis categories to assess data variability. Results: Nineteen publications with 22 data sets were identified and included in this analysis. Wide variability was apparent between all 3 velocity parameters and angiographic percent stenosis. The optimal peak systolic velocity thresholds for stenosis in stented carotid arteries were higher than those for native carotid arteries. Within each category of stenosis, the variability of all 3 velocity parameters was significantly lower in stented arteries than in native arteries. Conclusion: Although Doppler velocity criteria have been successfully used to classify the severity of stenosis in both native and stented carotid arteries, the relationship to angiographic stenosis contains significant variability. This analysis of published studies suggests that further refinements in Doppler velocity criteria will not lead to improved correlation with carotid stenosis as demonstrated by angiography.

Hemodialysis is a common treatment for approximately 370,000 patients in the United States with end-stage renal disease [1]. To optimize the procedure, the dialysis access site must be easily accessible but must also be able to continuously provide high blood flow rates: >250 mL/min [2]. If there is insufficient blood flow through the access, then the dialysis procedure becomes impractical or ineffective. To provide these features, an arteriovenous (AV) fistula is typically surgically created in the arm: an artery and a vein are anastomosed together, bypassing the high flow resistance of the capillary bed and providing enhanced flow through the artery and into the access vein. Unfortunately, as many as 60% of AV fistulae require an intervention within one year to maintain clinical patency [3,4]. There are two major causes of patency loss: thrombotic occlusion, brought on by aggressive intimal hyperplasia and stenotic lesions, or impaired dilation, whereby impaired venous remodeling does not provide a sufficient flow rate at the access site [2]. In the United States alone, it is estimated that the total expenditures related to access site complications and revisions exceed $2 billion per year [1]. After the creation of the fistula, the vein undergoes a rapid remodeling process, leading to an increase in the diameter of the lumen and increased muscular thickness in the wall, which is a process referred to as vein arterialization [5]. It has long been hypothesized that hemodynamic forces constitute the primary external influence on the remodeling process [6,7]. Since an AV fistula causes a dramatic rise in the flow rate and wall shear stress outside of normal physiological values, it is hypothesized that the vein and artery lumens chronically increase as a way to renormalize the value of the wall shear stress. The remodeling of the vessels has been shown to correlate with the initial time-averaged wall shear stress as evidenced by animal models of AV fistulae [6,7] and ultrasound surveillance in dialysis patients [5,8]. These studies hypothesized that the remodeling stops once the mean wall shear stress in the fistulae reach about 1.5 Pa in the radial artery and about 1.0 Pa in the cephalic vein. The renormalization of shear stress in the fistula vessels has been interpreted as evidence of a “mechanical homeostasis” [9]: the vessels seek to maintain a preferred mechanical state through a process of growth and remodeling. The shear-induced remodeling is widely hypothesized to be regulated in part by the vascular endothelium [10]. Despite the pervasive use of the AV fistula for dialysis access, the mechanisms which drive a fistula to either successful remodeling and patency versus occlusion and failure remain unclear [11]. Even though blood flow is thought to play an important role in fistula remodeling, the characterization of the hemodynamic stresses occurring within fistulae remain ambiguous [12], even within functioning accesses [13]. Characterizing the fistula hemodynamics has been hindered, in part, due to the relative complexity of the flow, including separation, vortex shedding, and swirling flows [14]. In this study, we use 3D ultrasound imaging and computational fluid dynamics to determine the hemodynamics in four mature AV fistulae of hemodialysis patients. The hemodynamic analysis aims to quantify the mechanical stresses occurring due to complex secondary flows. It is important to first characterize the hemodynamics in patent accesses in order to eventually understand the negative influence of hemodynamics in failing accesses [11]. It is furthermore unlikely that effective clinical treatments for fistula maturation will be successful until a more precise characterization of fistula hemodynamics is articulated [10].

Objective The mechanisms of restenosis in autogenous vein bypass grafts placed for peripheral artery disease are not completely understood. We investigated the role of hemodynamic stress in a case study of a revised bypass graft that failed due to restenosis. Methods The morphology of the lumen was reconstructed from a custom three-dimensional ultrasound system. Scans were taken at 1, 6, and 16 months after a patch angioplasty procedure. Computational hemodynamic simulations of the patient-specific model provided the blood flow features and the hemodynamic stresses on the vessel wall at the three times studied. Results The vessel was initially free of any detectable lesions, but a 60% diameter-reducing stenosis developed during the 16-month study interval. As determined from the simulations, chaotic and recirculating flow occurred downstream of the stenosis due to the sudden widening of the lumen at the patch location. Curvature and a sudden increase in the lumen cross-sectional area induced these flow features that are hypothesized to be conducive to intimal hyperplasia. Favorable agreement was found between simulation results and in vivo Doppler ultrasound velocity measurements. Conclusions Transitional and chaotic flow occurs at the site of the revision, inducing a complex pattern of wall shear as computed with the hemodynamic simulations. This supports the hypothesis that the hemodynamic stresses in the revised segment, produced by the coupling of vessel geometry and chaotic flow, led to the intimal hyperplasia and restenosis of the graft.

A CCD camera is used to image skin of human lower legs illuminated alternately by a red and an infrared LED light source. The images are then converted to venous oxygen saturation maps.

Arteriovenous fistulae are created surgically to provide an adequate access for dialysis in patients with End-Stage Renal Disease. Producing an autogenous shunt linking an artery and a vein in the peripheral circulation bypasses the high resistance capillary bed in order to provide the necessary flow rates at sites easily accessible for dialysis. In successful fistulae, venous flow rates can easily exceed 1000 mL/min. It has long been recognized that the hemodynamics constitute the primary external influence on the remodeling process [1, 2]; The high flow rate, together with the exposure of the venous tissue to the high arterial pressure, leads to a rapid process of wall remodeling that may end in a mature access or in stenosis and failure. Given the high failure rate of dialysis access (up to 50% require surgical revision within one year [3]), understanding the dynamics of blood flow within the fistula is a necessary step in understanding the remodeling, and ultimately, in improving clinical outcomes.Copyright © 2011 by ASME

We report a study of the role of hemodynamic shear stress in the remodeling and failure of a peripheral artery bypass graft. Three separate scans of a femoral to popliteal above-knee bypass graft were taken over the course of a 16 month period following a revision of the graft. The morphology of the lumen is reconstructed from data obtained by a custom 3D ultrasound system. Numerical simulations are performed with the patient-specific geometries and physiologically realistic flow rates. The ultrasound reconstructions reveal two significant areas of remodeling: a stenosis with over 85% reduction in area, which ultimately caused graft failure, and a poststenotic dilatation or widening of the lumen. Likewise, the simulations reveal a complicated hemodynamic environment within the graft. Preliminary comparisons with in vivo velocimetry also showed qualitative agreement with the flow dynamics observed in the simulations. Two distinct flow features are discerned and are hypothesized to directly initiate the observed in vivo remodeling. First, a flow separation occurs at the stenosis. A low shear recirculation region subsequently develops distal to the stenosis. The low shear region is thought to be conducive to smooth muscle cell proliferation and intimal growth. A poststenotic jet issues from the stenosis and subsequently impinges onto the lumen wall. The lumen dilation is thought to be a direct result of the high shear stress and high frequency pressure fluctuations associated with the jet impingement.

The current outlook for picture archiving and communications systems (PACS) in day-to-day clinical use is examined. After reviewing the components of a PACS, a set of requirements for a clinically acceptable system is outlined. The PACS concept employed by the US military is presented as an example of an integrated approach to a filmless hospital. Clinical evaluation, future applications, and current limitations of PACS technology are also reviewed. >

Various vector Doppler methods have been proposed in the last several decades to overcome the Doppler angle dependency in both conventional spectral Doppler and color Doppler by measuring both the speed and direction of blood flow. However, they have not been adopted for routine use because most of them require specialized hardware, which is not available in commercial ultrasound systems. An alternative approach (cross-beam method) that uses color Doppler images obtained from different steered beam angles is more feasible, but there is error in registering multiple color Doppler images because they are not acquired simultaneously. To alleviate this problem, we have evaluated a cross-beam vector Doppler system that registers spatially with a position sensor two color Doppler images from two different angles and temporally with ECG synchronization. The registration error was reduced to an average of 0.92 mm from 2.49 mm in 9 human subjects. Vector Doppler carotid artery images of a healthy subject and a patient with atherosclerotic plaques are also presented.

Tissue pulsatility imaging (TPI) is an ultrasonic technique that is being developed at the University of Washington to measure tissue displacement or strain as a result of blood flow over the cardiac and respiratory cycles. This technique is based in principle on plethysmography, an older nonultrasound technology for measuring expansion of a whole limb or body part due to perfusion. TPI adapts tissue Doppler signal processing methods to measure the “plethysmographic” signal from hundreds or thousands of sample volumes in an ultrasound image plane. This paper presents a feasibility study to determine if TPI can be used to assess cerebral vasoreactivity. Ultrasound data were collected transcranially through the temporal acoustic window from four subjects before, during and after voluntary hyperventilation. In each subject, decreases in tissue pulsatility during hyperventilation were observed that were statistically correlated with the subject's end-tidal CO 2 measurements. (E-mail: kucewicz@u.washington.edu )

Functional tissue pulsatility imaging is a new ultrasonic technique being developed to map brain function by measuring changes in tissue pulsatility as a result of changes in blood flow with neuronal activation. The technique is based in principle on plethysmography, an older, nonultrasound technology for measuring expansion of a whole limb or body part as a result of perfusion. Perfused tissue expands by a fraction of a percent early in each cardiac cycle when arterial inflow exceeds venous outflow, and it relaxes later in the cardiac cycle when venous drainage dominates. Tissue pulsatility imaging (TPI) uses tissue Doppler signal processing methods to measure this pulsatile "plethysmographic" signal from hundreds or thousands of sample volumes in an ultrasound image plane. A feasibility study was conducted to determine if TPI could be used to detect regional brain activation during a visual contrast-reversing checkerboard block paradigm study. During a study, ultrasound data were collected transcranially from the occipital lobe as a subject viewed alternating blocks of a reversing checkerboard (stimulus condition) and a static, gray screen (control condition). Multivariate analysis of variance was used to identify sample volumes with significantly different pulsatility waveforms during the control and stimulus blocks. In 7 of 14 studies, consistent regions of activation were detected from tissue around the major vessels perfusing the visual cortex.

Arterial stenoses are often associated with audible bruits. Quantitative analysis of the bruit spectrum has been successfully used to predict the residual lumen diameter in carotid stenoses. Arterial wall vibrations occurring due to turbulent pressure fluctuations in the post-stenotic jet are known to be the source of the bruits. We present novel signal processing techniques that enable the detailed noninvasive assessment of these vibrations in real time using color-Doppler and pulsed-wave Doppler ultrasound. A color-Doppler-based two-dimensional vibration imaging technique can be used to locate the source of the bruits relative to the underlying anatomy. Subsequently, a pulsed-wave Doppler-based technique can be used to analyze the bruit spectrum quantitatively. Experiments in ex vivo arteries indicate that these techniques can predict the location of the bruit as well as its spectral content. Case studies on human subjects with stenosed vein grafts are presented and the clinical applicability of this technique is discussed.

Doppler measurement of tissue vibrations (ultrasonic vibrometry) can provide clinical information about vascular pathology that may be otherwise difficult to obtain using conventional duplex ultrasound. Vibrometry can provide improved sensitivity, since the scattering strength from tissue is significantly higher than that from blood. In addition, detection of tissue vibrations has reduced angle dependency and does not require visualization of the vessel lumen, making the exam less dependent on operator skill and less time-consuming. The fundamental sources of error that can affect the measurement accuracy of the vibration characteristics are Doppler spectral broadening and tissue acceleration. Parametric simulation studies analyzing the effect of these sources of error and their implications are presented. We also present preliminary results from renal artery stenosis (RAS), demonstrating that a diagnosis based on the characteristics of measured tissue vibrations correlates well with the routine clinical diagnosis

A method has been developed to display Doppler spectral waveforms in lower extremity vein grafts in conjunction with 3-D vessel geometry. Doppler spectral waveforms and cross-sectional images of the vein graft are collected with a custom 3-D ultrasound imaging system. Computer processing generates a display of the Doppler sample volumes registered in 3-D space with a surface reconstruction of the vein graft lumen. An interactive computer interface displays spectral waveforms at user-selected sites in the graft. Summary displays combining spectral waveforms, maximum velocity and cross-sectional area provide a pictorial record of the state of the vein graft along its full length. The method is demonstrated for two patient studies, each at two time points after graft revisions. The graphic display of both hemodynamics and geometry allows rapid assessment of vein graft changes over time.

A three-dimensional (3D) ultrasound imaging system has been used to study spatial compounding of images acquired with different scanhead positions and orientations. A compounding algorithm has been developed which assigns regional weights depending on the local incidence angle of the ultrasound beam. Compound scans were performed of bones in vitro and the shoulder rotator cuff in volunteer subjects. Border measurements (peak value and width) were compiled as a function of ultrasound beam incidence angle and compared for single views and for maximum, mean and weighted mean compounding techniques. The weighted mean produces less variability than that of the maximum and mean for both intensity and border width. The weighted method also demonstrates less blurring of borders than the maximum and mean methods. Surfaces derived from the weighted reconstructions exhibited fewer gaps and fewer spurious connections between surfaces, which could be of particular importance for automated image analysis.

Three dimensional (3D) reconstruction of multiple two dimensional images, spatially and time registered, is increasingly being employed. These can be visualized on computer screens in full stereographic perspective using software and stereographic glasses now available. The authors have applied stereographic viewing to over 40 reconstructions of outlines of the endo and epicardiums of ultrasound imaged hearts. They found that standard viewing often mislead them into believing that misregistration existed. However, when viewed in stereographic mode, they found that these suspected lines did intersect, but at other places in the 3D reconstruction. The stereographic method has proven very useful in this and in distinguishing the separability of various 3D structural features in grid, surface, and voxel echocardiogram reconstructions.

The authors have used several configurations of a commercial 6D magnetic position and orientation measurement system to track an ultrasound scanhead and reconstruct 2D ultrasound images in 3D space. They have measured precision and accuracy with two magnetic sensors working in parallel, and with a miniaturized magnetic sensor. The use of two standard size sensors has shown limited improvement in precision (1.5 mm RMS uncertainty compared with 1.8 mm for a single sensor). The miniature sensor has an average precision of 2.1 mm over its operating range. The miniature sensor has been calibrated with an imaging system and has been used in 3D reconstructions of the stomach and the carotid artery.

An object spinning scan method was applied to acquire high resolution in vitro ultrasound images for the purpose of studying volume interpolation and rendering. Three dimensional (3D) reconstructions were accomplished for nineteen excised porcine and canine hearts. The resulting 3D images clearly revealed the 3D features with a user developed weighted opacity based interactive volume rendering approach. The 3D calculated left ventricular volumes correlated well to those measured from water displacement (r=0.9548). This study not only provides superior reference data sets investigation of volumetric reconstruction visualization methodologies, the employed methods of reconstruction and visualization can also be adapted to in vivo transesophageal 3D imaging.

Vein grafts are placed to bypass diseased arteries in the lower limb when symptoms such as pain during walking, rest pain, and tissue necrosis occur. Frequent surveillance of these grafts is recommended since early detection and revision of stenoses improves the likelihood of long-term patency. We are using three-dimensional (3D) ultrasound imaging to measure progressive changes in vein graft geometry. Cross-sectional area measurements in planes normal to the vessel center axis are calculated from 3D surface reconstructions. Data sets from serial studies are registered in a common coordinate system using anatomical reference points and cross-sectional area measurements are compared at matched sites. Extended studies have tracked patients requiring surgical revision to enlarge the vessel lumen in stenotic regions of their grafts. Follow-up periods on 5 cases range from 30 to 79 weeks to date. Each revised graft segment demonstrated a decrease in cross-sectional area over time, ranging from 25% to 77%, averaged over the length of the revision. The sequential area measurements, combined with 3D surface displays, provide a record of remodeling patterns and rates at specific sites within the grafts.