Search

This paper presents a novel single source fed isolated gate driver circuit based on the dual-forward converter topology. The two forward converters are paralleled at the secondary side to achieve 0%–100 $\%$ duty cycle range together with galvanic isolation. The gate driver switching frequency is independent of the main pulse-width modulation frequency (PWM). As a result, the gate driver switching devices and magnetics are designed for high frequencies independent of the main PWM frequency. At high frequencies, problems of resonance due to parasitics become significant. This paper discusses this problem and proposes a novel solution to mitigate it. In addition, this paper also presents a novel solution and circuit to produce negative gate pulse for miller clamp. The proposed circuit can be used for any application, irrespective of switching frequency, thus making it a wide band generalized gate driver. The circuit is analyzed and verified experimentally. [ABSTRACT FROM PUBLISHER]

In this work, a ten-level inverter scheme is presented to extend the linear modulation range (LMR) by using a unique space vector pulsewidth modulation (SVPWM) technique, such that no lower order harmonics (such as 5th, 7th, 11th, and 13th, etc.) are present in the phase voltage as compared to six-step mode operation. The proposed scheme can increase the peak phase fundamental voltage of the inverter from 0.577 to $0.637 V_{dc}$ (maximum possible peak phase fundamental voltage of a conventional hexagonal space vector structure (SVS) voltage source inverters while operating in six-step mode), irrespective of the load power factor (p.f), where $V_{dc}$ is the dc link voltage of the inverter. The ten-level inverter structure is formed using a two-level inverter and an H-bridge (HB) in cascade from one end and a floating capacitor-based two-level inverter cascaded with an HB from the other end to drive an open-end winding induction motor (OEWIM). All the HB capacitor voltages are balanced by using space vector redundancy. The claim of balancing the capacitor voltages throughout the whole modulation range is verified experimentally in this article. Experimental results at different steady-state and transient conditions are shown to validate the proposed inverter scheme’s efficacy in increasing the LMR. [ABSTRACT FROM AUTHOR]

A multilevel dodecagonal voltage space vector generation scheme for variable-speed drive applications with single-dc-link operation requires a large value of capacitance for cascaded H-bridge (CHB) filters, when operated at lower speeds. In existing schemes, the multilevel dodecagonal structure is obtained by cascading a flying capacitor inverter with a CHB. In this paper, a new scheme has been proposed to minimize the capacitance requirement for full speed operation by creating vector redundancies using modular and equal voltage CHBs. Also, an algorithm has been developed to optimize the selection of vector redundancies among the CHBs in order to minimize the voltage ripple of the floating capacitors. The proposed algorithm considers instantaneous capacitor voltages and phase currents for optimal selection of vector redundancies. A mathematical model for capacitor voltage deviation is presented, and the effectiveness of the proposed algorithm is verified in both the simulation and the experiment. [ABSTRACT FROM AUTHOR]

Generating dense multilevel voltage space structure using polygons of higher sides is one of the novel and elegant method to suppress low-order harmonics and to obtain refined sinusoidal voltages using voltage source inverters for variable frequency drive application without passive filters. Apart from the advantages of conventional multilevel inverter topologies, schemes generating polygonal voltage space vector structure can equip full dc-bus utilization, low switching frequency strategies to eliminate low-order harmonics, and increased linear modulation range. In this paper, an induction motor drive scheme generating a highly dense multilevel 24-sided polygonal voltage space vector structure using a single dc source, which can eliminate harmonics till 23rd order from phase voltages, is presented. Cascaded power circuit topology with a flying capacitor inverter fed with a dc source and two low voltage floating capacitor fed H-bridge inverters is used. Detailed experimentally validated results, under scalar as well as indirect rotor field oriented control of induction motor are provided. Studies on voltage ripple and reactive energy in various floating capacitors, harmonic performance of output voltage for wide range of speed operation, are also included. [ABSTRACT FROM AUTHOR]

In this paper, a new inverter topology is proposed for generating a multilevel dodecagonal voltage space vector structure for open-end winding induction motor (IM) using a single dc source. Dodecagonal voltage space vector structure eliminates fifth- and seventh-order harmonic voltages from phase voltage output and hence eliminates the fifth- and seventh-order harmonic currents through the motor leading to removal of the dominant sixth-order torque ripple generation in the motor over the entire modulation range. Multilevel space vector structure generates output voltage with better THD and low dv/dt. In the proposed topology, two three-level inverters drive an open-end winding IM, one inverter from each side. DC-link of primary inverter is from a dc source which delivers the entire active power, whereas the secondary inverter dc-link is maintained by a capacitor, which is self balanced during the inverter operation. The PWM scheme implemented ensures low switching frequency for primary inverter. Secondary inverter operates at a small dc-link voltage. Hence, switching losses are small for both primary and secondary inverters. Experimental results show the elimination of fifth- and seventh-order harmonic voltages over the entire modulation range, validating effectiveness of the proposed multilevel inverter scheme. [ABSTRACT FROM PUBLISHER]