Search

As enzymes in the outer membrane of the mitochondrion, monoamine oxidases (MAOs) can catalyze the oxidative deamination of monoamines in the human body. According to different substrates, MAOs can be divided into MAO-A and MAO-B. The imbalance of the MAO-A is associated with neurological degeneration, while excess MAO-B activity is closely connected with Parkinson's disease (PD) and Alzheimer's disease (AD); therefore, detection of MAOs is of great significance for the diagnosis and treatment of these diseases. This work reports the multiplexed detection of MAO-A and MAO-B using paper-based devices based on chemiluminescence (CL). The detection limits were 5.01 pg/mL for MAO-A and 8.50 pg/mL for MAO-B in human serum. In addition, we used paper-based devices to detect MAOs in human cells and tissue samples and found that the results of paper-based detection and Western blotting (WB) showed the same trend. While only one antibody can be incubated on the same membrane by WB, multiple antibodies incubated on the same paper enabled simultaneous detection of MAO-A and MAO-B by paper-based devices. The paper-based assay could be used for preliminary early screening of clinical samples for MAOs and can be extended as an alternative to WB for multiplexed detection of various proteins in disease cell or tissue samples.

Detection and characterization of DNA damage plays a critical role in genotoxicity testing, drug screening, and environmental health. We developed a fully integrated origami paper-based analytical device (oPAD) for measuring DNA damage. This simple device allows on-paper cell lysis, DNA extraction, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) reaction and signal readout with simple operation steps, enabling rapid (within 30 min) and high throughput assessment of multiple DNA damages induced by exogenous chemical agents.

A novel colorimetric and ratiometric fluorescent probe (Cou-BPO) was readily prepared for specific detection of harmful benzoyl peroxide (BPO). The probe Cou-BPO reacted with BPO via a selective oxidation cleavage-induced cascade reaction of the pinacol phenylboronate group, which resulted in an observable colorimetric and ratiometric fluorescence response towards BPO with a fast response time (

Nowadays, thanks to nanotechnological progress, which itself guides us more and more closely toward not only the efficient design of innovative nanomaterials or nanostructures, but to the improvement of their functionality, we benefit from an important asset in the battle against pathogenic illnesses. Herein, we report a versatile biocompatible plasmonic nanoplatform based on a Whatman paper incorporating positively-charged gold nanospherical particles via the immersion approach. The morphological characterization of the as-engineered-plasmonic paper was examined by SEM (scanning electron microscopy) and HRTEM (high-resolution transmission electron microscopy) investigations, while its surface chemical modification with a synthetic polypeptide, specifically RRWHRWWRR-NH2 (P2), was proved by monitoring the plasmonic response of loaded gold nanospheres and the emission signal of P2 via fluorescence spectroscopy. The as-functionalized plasmonic paper is non-cytotoxic towards BJ fibroblast human cells at bactericidal concentrations. Finally, the antimicrobial activity of the P2-functionalized plasmonic paper on both planktonic bacteria and biofilms was tested against two reference strains: Gram-positive Bacteria, i.e., Staphylococcus aureus and the Gram-negative Bacteria, i.e., Escherichia coli, determining microbial inhibition of up to 100% for planktonic bacteria. In line with the above presented nanoplatform&rsquo, s proper design, followed by their functionalization with active antimicrobial peptides, new roads can be open for determining antibiotic-free treatments against different relevant pathogens.

Significance: Commercial lasers, lamps, and light-emitting diode (LED) light sources have stimulated the clinical translation of photodynamic therapy (PDT). Yet, the continued exploration of new photosensitizers (PSs) for PDT often requires separate activation wavelengths for each agent being investigated. Customized light sources for such research frequently come at significant financial or technical cost, especially when compounded over many agents and wavelengths. Aim: LEDs offer potential as a cost-effective tool for new PS and multi-PS photodynamic research. A low-cost-per-wavelength tool leveraging high-power LEDs to facilitate efficient and versatile research is needed to further accelerate research in the field. Approach: We developed and validated a high-power LED array system for benchtop PDT with a modular design for efficient switching between wavelengths that overcome many challenges in light source design. We describe the assembly of a low-cost LED module plus the supporting infrastructure, software, and protocols to streamline typical in vitro PDT experimentation. Results: The LED array system is stable at intensities in excess of 100 mW/cm2 with 2.3% variation across the illumination field, competitive with other custom and commercial devices. To demonstrate efficacy and versatility, a primary ovarian cancer cell line was treated with two widely used PSs, aminolevulinic acid and verteporfin, using the LED modules at a clinically relevant 50 J/cm2 light dose that induced over 90% cell death for each treatment. Conclusions: Our work provides the community with a tool for new PS and multi-PS benchtop photodynamic research that, unlike most commercial light sources, affords the user a low barrier to entry and low-cost-per-wavelength with the goal of illuminating new insights at the forefront of PDT.

Viral detection presents a host of challenges for even the most sensitive analytical techniques, and the complexity of common detection platforms typically preclude portability. With these considerations in mind, we designed a paper microzone plate-based virus detection system for the detection of viral genetic material that can be performed with simple instruments. The sensing system can detect viral cDNA reverse-transcribed from total RNA extraction by utilizing a biotinylated capture probe and an Alexa Fluor® 647-labeled reporter probe. The biotinylated capture probe was linked to the paper surface via NeutrAvidin® that was physically adsorbed on the paper. After addition of reverse-transcribed sample and reporter probe in sequence, the reverse-transcribed target captured the reporter probe and tethered it to the capture probe in a bridged format. Fluorescence intensity was imaged using a Western blot imaging system, and higher target concentration was visible by the increased emission intensity from Alexa Fluor® 647. By utilizing paper, this detection setup could also serve as a sample concentration method via evaporation, which could remarkably lower the detection limit if needed. This detection platform used Epstein-Barr virus (EBV) RNA as a proof-of-concept by sensing cDNA resulting from reverse transcription and can be further expanded as a general method for other pathogens. EBV is a well-known human tumor virus, which has also recently been linked to the development of cervical cancer. The assay was accomplished within two hours including the room-temperature RNA extraction and reverse transcription steps. Also, this paper microzone plate-based platform can potentially be applicable for the development of point-of-care (POC) detection kits or devices due to its robust design, convenient interface, and easy portability. The experiment could be stopped after each step, and continued at a later time. The shelf-life of the modified paper plate setup was at least 3 months without a discernible change in signal, and the result from day 1 could be read at 3 months - both of which are important criteria for POC analytical testing tools, especially in resource-poor settings. All of the required assay steps could potentially be performed without any significant equipment using inexpensive paper microzone plates, which will be ideal for further development of POC testing devices. Although, this platform is not at the stage where it can be directly used in a point-of-care setting, it does have fundamental characteristics such as a stable platform, a simple detection method, and relatively common reagents that align closely with a POC system.

Silver nanoparticles (AgNPs) have been widely used for sterilization due to their broad-spectrum bactericidal properties. However, there exist the problems of premature releasing and accumulative toxicity when free AgNPs are applied. This study proposed a one-pot hydrothermal strategy to synthesize carbon spheres immobilized silver nanoparticles (AgNPs@CS). The synthesis involves with silver ammonia solution as Ag precursor, and corn stalk as green reducing agent and carbon precursor. Furthermore, AgNPs@CS was anchored by cellulose nanofibers (CNF) to obtain the antibacterial composite paper. The obtained CNF/AgNPs@CS paper exhibited superior antibacterial properties against E. coli and S. aureus. Notably, the accumulative release rate of AgNPs from AgNPs@CS was 10.2% in 9 days, while that from CNF/AgNPs@CS paper was only 6.7% due to the anchoring effect of both CS and CNF, which was low for avoiding the cumulative toxicity problem. In addition, the mechanical and barrier properties of CNF/AgNPs@CS paper were also improved by 29.4% (tensile index), 2.7% (tear index), 7.4% (burst index), 10% (folding endurance), 0.8% (water vapor transmission) and 9.4% (oxygen transmission rate), respectively. Therefore, the composite paper has potential application as a medical antibacterial material.

MicroRNAs (miRNAs) are considered as the potential biomarkers for many cancers. To determine miRNAs in cancer cells is significant for realizing these diseases. In this work, a microfluidic paper-based laser-induced fluorescence sensor based on duplex-specific nuclease (DSN) amplification was developed and applied to selectively and sensitively determine miRNAs in cancer cells. An interface for laser-induced fluorescence detection was firstly applied to perform the sample detection on the paper-based chip. Under the optimal conditions, DSN (3 μL 0.10 U) and Taqman probes (2 μL 2.5 × 10−7 M) were preserved on the circles (Diameter 4 mm) of the folded paper chip. When miRNA solution was added, the mixed solution could trigger fluorescence signal amplification by cyclically digesting hybrids of miRNAs and Taqman probes by DSN. The whole determination, including sample heating process, could be accomplished within 40 min. The detection limits for miRNA-21 and miRNA-31 were 0.20 and 0.50 fM respectively, corresponding to only 1.0 and 1.5 zmol consumption of miRNAs. The testing of mismatched miRNAs showed that the method had good specificity. Finally, the method was applied to determine miRNA-21 and miRNA-31 in lysates of cancer cells of A549 and HeLa, and hepatocyte LO2. MiRNA-21 and miRNA-31 could be successfully found from the two cancer cells. The concentrations for miRNA-21 and miRNA-31 were 1.74 × 10−13 M and 6.29 × 10−14 M in HeLa cell lysate (3.75 × 104 cells/mL), 3.07 × 10−15 M and 3.28 × 10−15 M in A549 cell lysate (8.33 × 106 cells/mL) respectively. The recoveries ranged from 87.30% to 111.83%, indicating the results were reliable. The developed method was effective, selective and sensitive in the determination of miRNAs in cancer cells.

We demonstrate the possibility of measuring FRET efficiency with a low-cost frequency-domain fluorescence lifetime imaging microscope (FD-FLIM). The system utilizes single-frequency-modulated excitation, which enables the use of cost-effective laser sources and electronics, simplification of data acquisition and analysis, and a dual-channel detection capability. Following calibration with coumarin 6, we measured the apparent donor lifetime in mTFP1-mVenus FRET standards expressed in living cells. We evaluated the system's sensitivity by differentiating the short and long lifetimes of mTFP1 corresponding to the known standards' high and low FRET efficiency, respectively. Furthermore, we show that the lifetime of the vinculin tension sensor, VinTS, at focal adhesions (2.30 ± 0.16 ns) is significantly (p l 10 - 6) longer than the lifetime of the unloaded TSMod probe (2.02 ± 0.16 ns). The pixel dwell time was 6.8 μs for samples expressing the FRET standards, with signal typically an order of magnitude higher than VinTS. The apparent FRET efficiency ( E FRET app ) of the standards, calculated from the measured apparent lifetime, was linearly related to their known FRET efficiency by a factor of 0.92 to 0.99 (R2 = 0.98). This relationship serves as a calibration curve to convert apparent FRET to true FRET and circumvent the need to measure multiexponential lifetime decays. This approach yielded a FRET efficiency of 18% to 19.5%, for VinTS, in agreement with published values. Taken together, our results demonstrate a cost-effective, fast, and sensitive FD-FLIM approach with the potential to facilitate applications of FLIM in mechanobiology and FRET-based biosensing.

Plastic and polythene as hydrophobic materials become a grave concern due to their non-biodegradable nature, cumbersome recycling and waste management. Cuticular wax derived from Calotropis procera is explored as an eco-friendly and safe hydrophobic material. The effects of duration of exposure to solvent, solvent type, size and side of the leaf on cuticular wax yield have been studied. Leaf with the smallest area (10 cm2–25 cm2) was found to be the most suitable to isolate the wax. GC–MS analysis of the wax revealed that the wax consists of mainly esters, alkane and alkene. Mitochondrial reductase (MTT) and lactate dehydrogenase (LDH) assay have been carried out on M5S cell line at various concentrations and the results indicate that up to 1 μg/ml (acetone as solvent) and 3 μg/ml (chloroform as solvent) use of wax has no toxic effect. To evaluate the hydrophobic potential of the wax in developing hydrophobic paper water regains and contact angle has been measured. The gain in hydrophobicity of the paper is evident from the rise in contact angle (≥90˚) of paper coated with wax. Scanning electron micrograph and FTIR spectra generated physical and chemical evidence of coating of wax on paper.

Recent progress in flexible and lightweight electrochemical sensor systems requires the development of paper-like electrode materials. Here, we report a facile and green synthesis of a new type of MnO 2 nanowires–graphene nanohybrid paper by one-step electrochemical method. This strategy demonstrates a collection of unique features including the effective electrochemical reduction of graphene oxide (GO) paper and the high loading of MnO 2 nanowires on electrochemical reduced GO (ERGO) paper. When used as flexible electrode for nonenzymatic detection of hydrogen peroxide (H 2 O 2 ), MnO 2 –ERGO paper exhibits high electrocatalytic activity toward the redox of H 2 O 2 as well as excellent stability, selectivity and reproducibility. The amperometric responses are linearly proportional to H 2 O 2 concentration in the range 0.1–45.4 mM, with a detection limit of 10 μM (S/N = 3) and detection sensitivity of 59.0 μA cm −2 mM −1 . These outstanding sensing performances enable the practical application of MnO 2 –ERGO paper electrode for the real-time tracking H 2 O 2 secretion by live cells macrophages. Therefore, the proposed graphene-based nanohybrid paper electrode with intrinsic flexibility, tailorable shapes and adjustable properties can contribute to the full realization of high-performance flexible electrode material used in point-of-care testing devices and portable instruments for in-vivo clinical diagnostics and on-site environmental monitoring.

In this study, a biodegradable paper-based composite with good mechanical and antibacterial properties was obtained by first reinforcing the cotton pulp-based paper with carboxylated cellulose nanofiber (CNF) via the Williamson reaction, followed by in situ generating zeolitic imidazolate framework-67 (ZIF-67) nanoparticles on the surface of the resulting cellulosic material. The mechanical properties and antibacterial activities of the resulting composite were investigated. The tensile testing demonstrated that the composites prepared with 2.5 wt% CNF exhibited outstanding mechanical performance under dry and wet conditions with the tensile strength values of 17.20 and 1.90 MPa, respectively, approximately 1.3 and 11 times higher compared to that of the original cellulose paper. Furthermore, the antibacterial experiments showed that the composites exhibited significant bacteriostasis, and the antibacterial properties increased significantly with increasing ZIF-67 loading in the composites. Consequently, this biodegradable composite could be potentially used in the field of medical and health security.

Shear stress caused by fluid flow is known to promote tissue development from cells in vivo. Therefore, perfusion cultures have been studied to investigate the mechanisms involved and to fabricate engineered tissues in vitro, particularly those that include blood vessels. Microfluidic devices, which function with fine machinery of chambers and microsyringes for fluid flow and have small culture areas, are conventionally used for perfusion culture. In contrast, we have developed a self-driven perfusion culture system by using a paper-based double-layered scaffold as the fundamental component. Gelatin microfibers were electrospun onto a paper material to prepare the scaffold system, in which the constant perfusion of the medium and the scaffold for cell adhesion/proliferation were functionally divided into a paper and a gelatin microfiber layer, respectively. By applying both the capillary action and siphon phenomenon of the paper-based scaffold, which bridged two medium chambers at different height levels, a self-driven medium flow was achieved and the flow rate was also stable, constant, and quantitatively controllable. Moreover, the culture area was enlargeable to the cm(2) scale. The endothelial cells cultivated on this system oriented along the medium-flow direction, suggesting that the shear stress caused by medium flow was effectively applied. This perfusion culture system is expected to be useful for fabricating three-dimensional and large engineered tissues in the future.

This work demonstrates the fabrication of partially mineralized scaffolds fabricated in 3D shapes using paper by folding, and by supporting deposition of calcium phosphate by osteoblasts cultured in these scaffolds. This process generates centimeter-scale free-standing structures composed of paper supporting regions of calcium phosphate deposited by osteoblasts. This work is the first demonstration that paper can be used as a scaffold to induce template-guided mineralization by osteoblasts. Because paper has a porous structure, it allows transport of O2 and nutrients across its entire thickness. Paper supports a uniform distribution of cells upon seeding in hydrogel matrices, and allows growth, remodelling, and proliferation of cells. Scaffolds made of paper make it possible to construct 3D tissue models easily by tuning material properties such as thickness, porosity, and density of chemical functional groups. Paper offers a new approach to study mechanisms of biomineralization, and perhaps ultimately new techniques to guide or accelerate the repair of bone., This work was funded by the Wyss Institute of Biologically Inspired Engineering. Early work on this project was funded by a sub-award from the University of Texas Health Science Center at Houston, under DARPA grant # W911NF-09-1-0044. The project was performed in part at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Infrastructure Network (NNIN), which is supported by the National Science Foundation under NSF award no. ECS-0335765. CNS is part of Harvard University. A patent application for this work has been filed but not yet published.

This article describes a paper-based low cost single cell HaloChip assay that can be used to assess drug- and radiation-induced DNA damage at point-of-care. Printing ink on paper effectively blocks fluorescence of paper materials, provides high affinity to charged polyelectrolytes, and prevents penetration of water in paper. After exposure to drug or ionizing radiation, cells are patterned on paper to create discrete and ordered single cell arrays, embedded inside an agarose gel, lysed with alkaline solution to allow damaged DNA fragments to diffuse out of nucleus cores, and form diffusing halos in the gel matrix. After staining DNA with a fluorescent dye, characteristic halos formed around cells, and the level of DNA damage can be quantified by determining sizes of halos and nucleus with an image processing program based on MATLAB. With its low fabrication cost and easy operation, this HaloChip on paper platform will be attractive to rapidly and accurately determine DNA damage for point-of-care evaluation of drug efficacy and radiation condition. Graphical Abstract Single cell HaloChip on paper.

We combined conventional inkjet printing technology with flexographic printing to fabricate drug delivery systems with accurate doses and tailored drug release. Riboflavin sodium phosphate (RSP) and propranolol hydrochloride (PH) were used as water-soluble model drugs. Three different paper substrates: A (uncoated woodfree paper), B (triple-coated inkjet paper) and C (double-coated sheet fed offset paper) were used as porous model carriers for drug delivery. Active pharmaceutical ingredient (API) containing solutions were printed onto 1 cm × 1 cm substrate areas using an inkjet printer. The printed APIs were coated with water insoluble polymeric films of different thickness using flexographic printing. All substrates were characterized with respect to wettability, surface roughness, air permeability, and cell toxicity. In addition, content uniformity and release profiles of the produced solid dosage forms before and after coating were studied. The substrates were nontoxic for the human cell line assayed. Substrate B was smoothest and least porous. The properties of substrates B and C were similar, whereas those of substrate A differed significantly from those of B, C. The release kinetics of both printed APIs was slowest from substrate B before and after coating with the water insoluble polymer film, following by substrate C, whereas substrate A showed the fastest release. The release rate decreased with increasing polymer coating film thickness. The printed solid dosage forms showed excellent content uniformity. So, combining the two printing technologies allowed fabricating controlled-release oral dosage forms that are challenging to produce using a single technique. The approach opens up new perspectives in the manufacture of flexible doses and tailored drug-delivery systems.

Bacteriophage (phage), which are viruses that infect bacteria only, have shown promise as vehicles for targeted cancer gene therapy, albeit with poor efficiency. Recently, we generated an improved version of phage vectors by incorporating cis genetic elements of adeno‐associated virus (AAV). This novel AAV/phage hybrid (AAVP) efficiently delivered systemically administered therapeutic genes to various tumor targets by displaying an integrin tumor‐targeting ligand on the phage capsid. However, inherent limitations in bacteriophage mean that these AAVP vectors still need to be improved. One of the limitations of AAVP in mammalian cells may be its susceptibility to proteasomal degradation. The proteasome is upregulated in cancer and it is known that it constitutes a barrier to gene delivery by certain eukaryotic viruses. We report here that inhibition of proteasome improved targeted reporter gene delivery by AAVP in cancer cells in vitro and in tumors in vivo after intravenous vector administration to tumor‐bearing mice. We also show enhanced targeted tumor cell killing by AAVP upon proteasome inhibition. The AAVP particles persisted significantly in cancer cells in vitro and in tumors in vivo after systemic administration, and accumulated polyubiquitinated coat proteins. Our results suggest that the proteasome is indeed a barrier to tumor targeting by AAVP and indicate that a combination of proteasome‐inhibiting drugs and AAVP should be considered for clinical anticancer therapy., Highlights ► Proteasome in cancer is a barrier to tumor targeting by RGD4C/AAVP.► Proteasome inhibiting drugs enhance targeted gene transfer by RGD4C/AAVP.► Proteasome inhibition increases targeted cancer gene therapy by RGD4C/AAVP.► RGD4C/AAVP persistence in cancer is improved by proteasome inhibition

Poor cell retention and limited cell survival after grafting are major limitations of cell therapy. Recent studies showed that the use of matrices as vehicles at the time of cell injection can significantly improve cell engraftment by providing an appropriate structure and physical support for the injected cells. Properly designed matrices can also promote the organization of the cells into a functioning cardiac-like tissue and enhance integration between the host and the engrafted tissue. Furthermore, the use of an injectable biomaterial provides an opportunity to release in situ bioactive molecules that can further enhance the beneficial effects of cell transplantation. In this article we review a large variety of biologically derived synthetic and hybrid materials that have been tested as matrices for cardiac repair. We summarize the optimal parameters required for an ideal matrix including biocompatibility, injectability, degradation rate, and mechanical properties. Using an in vivo subcutaneous grafting model, we also provide novel data involving a side-by-side comparison of six synthetic matrices derived from maltodextrin. By systematically varying polymer molecular weight, cross-link density, and availability of cell adhesion motifs, a synthetic matrix was identified that supported skeletal myotube formation similar to Matrigel™. Our results emphasize not only the need to have a range of tunable matrices for cardiac cell therapy but also the importance of further characterizing the physical properties required for an ideal injectable matrix.

The major objective of successful development of tissue-engineered vascular grafts is long-term in vivo patency. Optimization of matrix, cell source, surface modifications, and physical preconditioning are all elements of attaining a compatible, durable, and functional vascular construct. In vitro model systems are inadequate to test elements of thrombogenicity and vascular dynamic functional properties while in vivo implantation is complicated, labor-intensive, and cost-ineffective. We proposed an ex vivo ovine arteriovenous shunt model in which we can test the patency and physical properties of vascular grafts under physiologic conditions. The pressure, flow rate, and vascular diameter were monitored in real-time in order to evaluate the pulse wave velocity, augmentation index, and dynamic elastic modulus, all indicators of graft stiffness. Carotid arteries, jugular veins, and small intestinal submucosa-based grafts were tested. SIS grafts demonstrated physical properties between those of carotid arteries and jugular veins. Anticoagulation properties of grafts were assessed via scanning electron microscopy imaging, en face immunostaining, and histology. Luminal seeding with endothelial cells greatly decreased the attachment of thrombotic components. This model is also suture free, allowing for multiple samples to be stably processed within one animal. This tunable (pressure, flow, shear) ex vivo shunt model can be used to optimize the implantability and long-term patency of tissue-engineered vascular constructs.

The goal of this investigation was to ascertain whether bone cells undergo autophagy and to determine if this process is regulated by environmental factors. We showed that osteocytes in both murine and human cortical bone display a punctuate distribution of microtubule-associated protein light chain 3, indicative of autophagy. In addition, we noted a basal level of autophagy in preosteocyte-like murine long bone-derived osteocytic (MLO)-A5 cells. Autophagy was upregulated following nutrient deprivation and hypoxic culture, stress conditions that osteocytes encounter in vivo. Furthermore, in response to calcium stress, the transcription factor hypoxia inducible factor 1 regulated MLO-A5 autophagy. Finally, we showed that the more differentiated MLO-Y4 osteocyte-like cells exhibited a significant basal autophagic flux. Based on these findings, we suggest that raising the level of autophagic flux is a mechanism by which differentiated bone cells survive in a stressful environment.

Purpose: To ensure the efficiency and safety of transplanted human embryonic stem cell (hESC)-derived osteoblast-like cells (hESC-OS) for bone regeneration, this study was designed to determine the effects of continuous cell expansion on the osteoblastic differentiation stability, pluripotency, and tumorigenic potential of long-term expanded hESC-OS. Methods: hESCs manually harvested as cell aggregates or enzymatically dissociated as single cells were directly incubated in osteogenic medium and serially passaged to passage 25. Expression of osteoblast-related genes, pluripotent regulator genes, and genes related to tumorigenesis were examined at the primary passage and every 5 passages thereafter. hESC-OS were subcutaneously transplanted into nude mice for 4–24 weeks to test for teratoma formation. hESC-OS were recultivated in hESC culture conditions to evaluate the extent to which reverse differentiation back to the undifferentiated stage may occur. Results: hESC-OS derived from hESC aggregates and dissociated cells exhibited comparable osteoblast differentiation patterns. Expression levels of osteoblast-related genes reached plateau levels at passages 5–10 before declining in higher passages. Expression of tumor-associated genes was not significantly increased. Only hESC-OS at primary and first passages formed teratomas after 4 weeks in vivo. The hESC-OS were not able to revert to hESCs. Conclusions: Expanded hESC-OS demonstrated lineage-specific differentiation stability, did not maintain the pluripotency of hES cells, and were genetically stable. Thus, hESC-OS may be considered for large animal preclinical studies.

The wide scale application of dried blood spots (DBS) as a collection tool for low-cost HIV drug resistance testing requires a greater understanding of the accuracy of DBS for genotype analysis and the stability of DBS under various environmental conditions. Analysis of a 50microl DBS via a single amplicon, nested PCR-based in-house assay (the Burnet genotyping assay) showed an average nucleotide concordance of 98.9% with plasma samples, although only 65% of nucleotide mixtures detected in plasma were also detected within DBS. The analysis of three DBS resulted in the detection of a greater number of nucleotide mixtures (72 and 109 mixtures detected within one and three DBS, respectively, n=10). Two DBS extraction protocols (silica particle; NucliSENS, bioMerieux and spin column extraction; High Pure, Roche) were assessed and found to be equivalent (79% and 84% recovery success respectively, n=19). FTA Elute paper (Whatman) was an inferior DBS collection medium compared to Whatman 903 paper. DBS appeared relatively tolerant to multiple freeze/thaw cycles, with 79% of DBS subjected to ten freeze/thaw cycles successfully amplified compared to 93% of DBS defrosted once (n=14). High temperature (37 degrees C) and high humidity (>90%) substantially impaired DBS recovery within two weeks of storage (38%, n=8), whilst storage at -20 degrees C or 4 degrees C adequately preserved DBS for this period (100% recovery, n=8). Therefore, whilst DBS are suitable for HIV drug resistance surveillance, the use of multiple DBS may be required to ensure accurate detection of minor HIV quasispecies and short-term storage of samples at either 4 degrees C or -20 degrees C is recommended.

The effects of neodymium:yttrium-aluminium-garnet (Nd:YAG) laser and silicon carbide (SiC) paper on the surface micro-topography of titanium-6 aluminium-4 vanadium (Ti6Al4V) alloy were examined in relation to the response of bone cells. The study was performed in three distinct stages: (1) after surface treatment of samples by laser and SiC paper, the surface hardness, surface roughness, corrosion resistance and surface tension were evaluated; (2) the growth of mouse connective tissue fibroblast cells (L-929) on untreated and treated samples was assessed in vitro; (3) the response of goat osteoblast cells to untreated and treated implanted samples was assessed in vivo. The surface roughness varied between 7 +/- 0.02 for laser-treated samples (LTSs) at 140 J cm(-2) and 21.8 +/- 0.05 for mechanically treated samples (MTSs). The surface hardness was found to vary from 377 Vickers hardness number (VHN) for MTSs to 850 VHN for LTSs. A corrosion potential of -0.21V was achieved for the LTSs compared with -0.51V for the MTSs. The LTSs exhibited a more hydrophilic behaviour (i.e. wettability) than did the MTSs. No cytotoxicity effect, unlike for the MTSs, was observed for the LTSs. The results of in vivo tests indicated longitudinal growth of osteoblast cells along the grooves on the samples formed by the SiC paper, and multidirectional spreading of the cells on the LTSs.

The differentiation of osteoblasts from mesenchymal precursors requires a series of cell fate decisions controlled by a hierarchy of transcription factors. These include RUNX2, Osterix (OSX), ATF4 and a large number of nuclear coregulators. During bone development, initial RUNX2 expression coincides with the formation of mesenchymal condensations and precedes the branching of chondrogenic and osteogenic lineages. Given its central role in bone development, it is not surprising that RUNX2 is subject to a variety of controls. These include posttranslational modification, especially phosphorylation, and interactions with accessory nuclear factors. Specific examples of RUNX2 regulation to be reviewed include phosphorylation by the ERK/MAP kinase pathway and interactions with DLX5. RUNX2 is regulated via phosphorylation of critical serine residues in the proline/serine/threonine domain. In vivo, the transgenic expression of constitutively active MAP kinase in osteoblasts accelerated skeletal development, while a dominant-negative MAPK retarded development in a RUNX2-dependent manner. DLX5-RUNX2 complexes can be detected in osteoblasts and this interaction plays a critical role in maintaining osteoblast-specific expression of the bone sialoprotein gene. These studies allow us to begin understanding the complex mechanisms necessary to fine-tune bone formation as mesenchymal progenitors progress down the osteoblast lineage.

Fibroblast growth factor (FGF) signaling plays a critical role in skeletal development, yet the mechanism by which FGFs affect bone mineralization is not well understood. Review of the literature investigating effects of FGF signaling on bone mineralization indicates that FGFs may stimulate expression of factors that prevent mineralization in the short term and enhance mineralization in the long term. Pyrophosphate is an ideal example of a factor that, dependent upon environment, has the capacity to inhibit or enhance mineralization. PC-1 is the primary generator of pyrophosphate in osteoblastic cells; therefore, regulated expression of PC-1 by FGFs may be a principal mechanism by which FGF signaling affects bone mineralization. We previously showed that FGF2 induces PC-1 expression in preosteoblastic cells and that this induction is differentiation stage dependent. In order to more directly investigate the mechanism by which PC-1 expression is regulated, we have cloned a 2.8-kb region of the PC-1 gene promoter and constructed a PC-1 gene promoter/firefly luciferase reporter construct. Results indicate that this construct is specifically responsive to FGF2 or ascorbate (an inducer of osteoblast differentiation). Promoter responsiveness to FGF2 is significantly diminished upon osteoblast differentiation, and increases in promoter activity that occur with osteoblast differentiation are inhibited by FGF2 treatment. These results indicate that the mechanism of PC-1 induction by FGF2 in preosteoblastic cells is distinct from the mechanism of induction that occurs with osteoblast differentiation. These results also indicate that PC-1 may play multiple and distinct roles in the development of mineralized tissues.

The effects of the addition of ammonium magnesium phosphate (AMP) to the paper of an electrically heated cigarette (EHC) prototype on smoke composition and toxicity were quantified and the underlying mechanisms investigated. Smoke from EHC prototypes with and without AMP and from conventional cigarettes, i.e. the University of Kentucky Standard Reference Cigarette 1R4F and eight American-blend market cigarettes, was compared. Endpoints for comparison were smoke chemistry, where toxic constituents were measured, cytotoxic activity, as measured in murine fibroblasts embryo cells by the Neutral Red Uptake Assay, and genotoxic activity, as measured in bacteria by the Salmonella Reverse Mutation Assay and in murine lymphoma cells by the TK Assay. The addition of AMP to the EHC led to a reduction of toxic substances and toxicological activity of approximately 30% compared to the EHC without AMP. Compared to the conventional cigarettes, the EHC with AMP showed reductions of 75-90%. Smoke from the EHCs generated in nitrogen atmospheres supplemented with different concentrations of ammonia and oxygen was assayed for its in vitro cytotoxicity and genotoxicity. The results indicate that the ammonia released by AMP at the heating site of the EHC is responsible for the reductions in cytotoxicity and mutagenicity for the EHC with AMP compared with the EHC without AMP. Thus, while the EHC approach distinctly reduces toxic smoke constituents compared to conventional cigarettes, the use of AMP in the paper of an EHC leads to further distinct reductions. In the study presented here, in vitro assays were used as quantitative tools to investigate toxicity-related mechanisms.

Gaining a greater understanding of the blood-brain barrier (BBB) is critical for improvement in drug delivery, understanding pathologies that compromise the BBB, and developing therapies to protect the BBB. In vitro human tissue models are valuable tools for studying these issues. The standard in vitro BBB models use commercially available cell culture inserts to generate bilayer co-cultures of astrocytes and endothelial cells (EC). Electrospinning can be used to produce customized cell culture substrates with optimized material composition and mechanical properties with advantages over off-the-shelf materials. Electrospun gelatin is an ideal cell culture substrate because it is a natural polymer that can aid cell attachment and be modified and degraded by cells. Here, we have developed a method to produce cell culture inserts with electrospun gelatin "biopaper" membranes. The electrospun fiber diameter and cross-linking method were optimized for the growth of primary human endothelial cell and primary human astrocyte bilayer co-cultures to model human BBB tissue. BBB co-cultures on biopaper were characterized via cell morphology, trans-endothelial electrical resistance (TEER), and permeability to FITC-labeled dextran and compared to BBB co-cultures on standard cell culture inserts. Over longer culture periods (up to 21 days), cultures on the optimized electrospun gelatin biopapers were found to have improved TEER, decreased permeability, and permitted a smaller separation between co-cultured cells when compared to standard PET inserts.

Development of rapid screening in the ambulatory environment is the most pressing needs for the control of spread of infectious disease. Despite there are many methods to detect the immunoassay results, quantitative measurement in rapid disease screening is still a great challenge for point-of-care applications. In this work, based on the internal structural protein, i.e., nucleoprotein (NP), and outer surface glycoproteins, i.e., H1 and H3, of the influenza viruses, specific and sensitive immunoassay on paper-based platform was evaluated and confirmed. Detection and subtyping of influenza A H1N1 and H3N2 viruses found in people were demonstrated by colorimetric paper-based sandwich immunoassay. Concentration-dependent response to influenza viruses was shown and the detection limits could achieve 2.7×10(3) pfu/assay for H1 detection and 2.7×10(4) pfu/assay for H3 detection, which are within the clinical relevant level. Moreover, detection of influenza virus from infected cell lysate and clinical samples was demonstrated to further confirm the reliability of the paper-based immunoassay. The use of paper for the development of diagnostic devices has the advantages of lightweight, ease-of-use, and low cost and paper-based immunoassay is appropriate to apply for rapid screening in point-of-care applications.

To perform phosphoproteomics and signal transduction studies, a number of protein kinase activities and levels must be simultaneously analyzed in different cell samples and correlated with phosphoprotein patterns to obtain conclusions with regard to the regulation of kinase networks. We describe here a miniaturized format of the classical phosphocellulose (P81) paper binding assay with which up to 594 kinase reactions can be simultaneously analyzed. Kinase peptide substrates possessing a minimum of three consecutive basic residues were subjected to phosphorylation in 96-well plates and aliquots of the phosphorylation reactions were spotted on arrays printed on P81 papers. Phosphorylation levels were quantified using a storage phosphor system imager. The versatility of the procedure was validated by analyzing casein kinase 2, protein kinase C, and p34cdc2/cyclin B in cell extracts and testing the effect of known inhibitors and activators on kinase activities. This improved, miniaturized version of the classical P81 paper method combines simplicity, high sensitivity, high reproducibility, high reliability, and optimal Z factors and takes into account possible sources of background signals. We discuss the possibility of automation and the advantages over other methods.

Objective: To evaluate the toxicity of extracts from disposable chopsticks, toothpicks, and paper cups on L-929 cells. Methods: We followed national standards to prepare the extracts from disposable chopsticks, toothpicks, and paper cups used for the cell culture media, and the morphology of L-929 cells was observed with an optical microscope. The loss rate for adherent cells was evaluated with the trypan blue exclusion method, and cell proliferation was determined using the WST-1 assay. Results: Compared with the control group, the cells cultured in media containing the extracts showed signs of apoptosis and necrosis after culturing for 4 or 7 days, and the loss rate for adherent cells was significantly increased (P < 0.05). An obvious decrease in cell viability was also observed (P < 0.05). Conclusion: The extracts from disposable chopsticks, toothpicks, and paper cups can affect the growth and proliferation of L-929 cells and are potentially toxic to humans.

Paper and board used as food contact materials (FCMs) are chemically complex matrices, partly due to the naturally occurring substances in paper and board, but also due to the chemical treatment of the paper used to make it suitable for food contact. In order to assure the safety of packaging materials, information on the exposure as well as on the toxicity of substances in the packaging must be obtained. This study describes a comprehensive method for the extraction and fractionation of substances present in paper and board FCMs for further investigation by in vitro testing and chemical analysis. The extraction efficiency and the fractionation process were validated by determining recoveries in extracts from paper and board fortified with five surrogates of known concentration. The recoveries for the five surrogates were between 20% and 104% in the raw extract and between 21% and 109% after extraction and fractionation. The fractionation both reduces the number of compounds to be identified and works as a sample clean-up by reducing matrix effects. Raw extracts and fractions from two paper and board FCMs were furthermore tested in the aryl hydrocarbon receptor (AhR) reporter gene assay. Both raw extracts and two of the fractions of the raw extracts gave a positive response in the AhR assay. The strategy of extraction followed by fractionation offers a powerful tool in order to make the workflow for screening FCMs for potentially adverse effects more efficient.

The ability to archive biological samples for subsequent nucleic acid analysis is essential for tissue specimens and forensic samples. FTA® Card is a chemically treated filter paper designed for the collection and room temperature storage of biological samples for subsequent DNA analysis. Its usefulness for the preservation of biological samples for subsequent RNA analysis was tested. Here, we demonstrate that RNA in biological samples stored on FTA Cards is stable and can be used successfully for RT-PCR and northern blot analysis. RNA stability depends on the storage temperature and the type of biological specimen. RNA in mammalian cells stored on FTA Cards is stable for over one year at temperatures at or below −20°C and for two to three months in samples stored at room temperature. For plant leaf, longer storage times (> 5 days) require temperatures at or below −70°C following sample application. FTA Cards may constitute a method not only for convenient collection and storage of biological samples but also for rapid RT-PCR analysis of tissue and cell samples.

The use of paper-based test platforms in cell culture experiments is demonstrated. The arrays used for two-dimensional cell cultures were prepared by printing patterned structures on a paper substrate using a hydrophobic polydimethylsiloxane (PDMS) ink. The non-printed, PDMS-free areas formed the array for the cell growth experiments. Cell imaging was enabled by using a lipophilic staining agent. A set of coated paper substrates was prepared to study the effect of the physicochemical properties of the substrate (topography, roughness and surface energetics) on cell attachment and growth. The studied paper substrates were found to be cell-repellent or cell-supporting. Cell growth was supported by substrates with a large bearing area, low surface area ratio (Sdr), high total surface free energy and an intermediate electron donor surface energy component. The cells were grown to full confluency within 72 h.

The evaluation of cytotoxic and genotoxic effects of selected technological samples from sulfate pulp mill waste waters by using the growing activity method for pseudodiploid fibroblasts V79 from lungs of the Chinese hamster and from human heteroploid fibroblasts EUE has been described along with the DNA-inhibition test for studying the synthesis of DNA after it has been influenced by the above-mentioned samples. Both the waste solution produced during the preparation of bleaching agents and the liquor generated after using hypochlorite (1st stage) as a fourth filter (after the production of paper pulp) are cytotoxic waste waters. Black liquor generated during the production of viscose pulp may have mutagenic effects and black liquor obtained from the production of paper pulp is characterized by mutagenic as well as carcinogenic effects.

Fundamental investigations of human biology, and the development of therapeutics, commonly rely on 2D cell-culture systems that do not accurately recapitulate the structure, function, or physiology of living tissues. Systems for 3D cultures exist but do not replicate the spatial distributions of oxygen, metabolites, and signaling molecules found in tissues. Microfabrication can create architecturally complex scaffolds for 3D cell cultures that circumvent some of these limitations; unfortunately, these approaches require instrumentation not commonly available in biology laboratories. Here we report that stacking and destacking layers of paper impregnated with suspensions of cells in extracellular matrix hydrogel makes it possible to control oxygen and nutrient gradients in 3D and to analyze molecular and genetic responses. Stacking assembles the “tissue”, whereas destacking disassembles it, and allows its analysis. Breast cancer cells cultured within stacks of layered paper recapitulate behaviors observed both in 3D tumor spheroids in vitro and in tumors in vivo: Proliferating cells in the stacks localize in an outer layer a few hundreds of microns thick, and growth-arrested, apoptotic, and necrotic cells concentrate in the hypoxic core where hypoxia-sensitive genes are overexpressed. Altering gas permeability at the ends of stacks controlled the gradient in the concentration of the O 2 and was sufficient by itself to determine the distribution of viable cells in 3D. Cell cultures in stacked, paper-supported gels offer a uniquely flexible approach to study cell responses to 3D molecular gradients and to mimic tissue- and organ-level functions.

The progressive ankylosis gene (ank) is a transmembrane protein that transports intracellular pyrophosphate to the extracellular milieu. Human mutations of ank lead to craniometaphyseal dysplasia, a disease which is characterized by the overgrowth of craniofacial bones and osteopenia in long bones, suggesting that ANK plays a regulatory role in osteoblast differentiation. To determine the role of ANK in osteoblast differentiation, we suppressed ANK expression in the osteoblastic MC3T3-E1 cell line using siRNA and determined the expression of osteoblastic marker genes and the transcription factors osterix and runx2. In addition, we determined the osteoblastic differentiation of bone marrow stromal cells isolated from the bone marrow of ank/ank mice, which express a truncated, nonfunctional ANK protein, or wild-type littermates. Suppression of ANK expression in MC3T3-E1 cells led to a decrease in bone marker gene expression, including alkaline phosphatase, bone sialoprotein, osteocalcin and type I collagen. In addition, osterix gene expression was decreased in ANK expression-suppressed MC3T3 cells, whereas runx2 expression was increased. Bone marrow stromal cells isolated from ank/ank mice cultured in the presence of ascorbate-2-phosphate for up to 35 days showed markedly reduced mineralization compared to the mineralization of bone marrow stromal cells isolated from wild-type littermates. In conclusion, these findings suggest that ANK is a positive regulator of differentiation events towards a mature osteoblastic phenotype.

Dmp1-null mice and patients with mutations in dentin matrix protein 1 (DMP1) resulting in autosomal recessive hypophosphatemic rickets display similar skeletal defects. As mutations were observed in the last 18 amino acids of DMP1 in 1 subset of patients and as fragments of intact DMP1, a 37-kDa N-terminal and a 57-kDa C-terminal fragment, have been purified from bone and dentin, we hypothesized that the cleaved 57-kDa C-terminal fragment is the essential functional domain of DMP1. To test this hypothesis, different forms of recombinant DMP1 were expressed in 293EBNA, CHO and 2T3 cells. The results showed that DMP1 was processed into a 37-kDa N-terminal and a 57-kDa C-terminal fragment in vitro in all cell lines examined. DMP1 processing in CHO cells was blocked by a furin protease inhibitor, decanoyl-Arg-Val-Lys-Arg-chloromethyl ketone, in a dose-dependent manner. Coexpression of PHEX, a potential upstream protease, had no apparent effect on DMP1 cleavage in 293EBNA cells, suggesting that PHEX may not be required for DMP1 processing. To test the in vivo role of the C-terminal fragment, transgenic mice overexpressing full-length DMP1 or the 57-kDa fragment controlled by the 3.6-kb Col1 promoter were generated. Overexpression of these transgenes had no effect on the wild-type skeleton, but on the Dmp1-null background showed expression in the osteoblast layer and throughout the bone matrix leading to the rescue of the null bone phenotype. This suggests that the 57-kDa C-terminal fragment may be able to recapitulate the function of intact DMP1 in vivo.

The overall goal of the investigation was to examine autophagy in the growth plate and to ascertain how this process was regulated. Herein, we show that in the postmitotic maturing zone of the growth plate, chondrocytes express an autophagic phenotype. This robust and particulate immunohistochemical response provides direct evidence that autophagy is a new and transient stage in the chondrocyte maturation pathway. We found that induction of autophagy was regulated by mTOR, a sensor of cellular metabolism. When mTOR was inhibited, changes in LC3 fluorescence indicated that this kinase regulated development of the autophagic state. To determine if AMP kinase was required for chondrocyte autophagy, we suppressed its expression in N1511 cells using siRNA technology. When these cells were serum starved, a condition that triggers autophagy, there was no change in LC3 distribution. This result confirmed that AMP kinase was required for the induction of the autophagic response. Based on the 2 studies described above, and our previous observation that HIF-1 is required for the induction of autophagy, we put forward the hypothesis that autophagy is regulated by the activities of AMP kinase and mTOR in a HIF-1-dependent manner. Once autophagy is activated, the postmitotic chondrocytes would be expected to remain viable in their unique microenvironment and complete their life cycle.

This study evaluates the feasibility of the use of the FTA® Gene Guard System (a commercial product consisting of filter paper impregnated with patented chemicals supplied by the Whatman company) for the shipment, storage and detection of RNA rabies viruses by a simplified hemi-nested reverse transcriptase polymerase chain reaction. HnRT-PCR of the rabies virus nucleoprotein gene with specific primers showed that viral RNA extracted from crude infected tissues remained stable after fixation on the filter paper under diverse environmental conditions for at least 35 days. The sequence analysis of the products amplified from five out of the seven known genotypes of Lyssaviruses showed the stability of viral RNA viruses after fixation on the filter paper. Furthermore, the sensitivity of the hnRT-PCR following RNA fixation on the filter paper was equivalent to that of standard hnRT-PCR. In conclusion, the stability of viral RNA and the inactivation of infectivity make the FTA® technology useful for the storage, transport, collection and subsequent molecular analysis of viral rabies RNA, facilitating epidemiological investigations in the field.

The Fenholloway River near Perry, Florida, receives effluent from a paper mill and contains populations of masculinized female eastern mosquitofish, Gambusia holbrooki. A previous study identified the androgen precursor androstenedione at a low concentration (0.14 nM) in water samples from the river. The present study makes use of a toxicity identification and evaluation approach that includes solid phase extraction and high pressure liquid chromatography purification, androgen receptor transcription assays, and liquid chromatography mass spectroscopy to identify and characterize steroids in the Fenholloway River sediment. Androstenedione (2.4 nM) and progesterone (155 nM) were identified in the river sediment at concentrations greater than in the river water column (0.14 nM androstenedione, and 6.5 nM progesterone). Spring Creek, a comparison stream that does not receive mill effluent, contained low levels of progesterone (0.3 nM) but no androstenedione in the sediment. The data are consistent with the hypothesis that pine pulp-derived phytosteroids in the paper mill effluent accumulate in river sediment where they are converted by microbes into progesterone and this into androstenedione and other bioactive steroids. Equally important is that normal streams with much less organic matter still contain progesterone, but at dramatically lower levels. The presence of androgens and androgen precursors in the river water and sediment likely contributes to the masculinized phenotype of the female Gambusia holbrooki in the Fenholloway River.

A cell line stably transfected with reporter genes activated by retinoic acid was used to test a paper mill effluent for the presence of retinoids or components that interfere with retinoic acid-stimulated gene transcription. No retinoids were detected in effluent or control water. However, effluent water significantly decreased reporter activity stimulated by all-trans-retinoic acid, while activity stimulated by 9-cis-retinoic acid was unaffected. In a limited fractionation through a C-18 solid phase-exchange column the inhibitory activity was retained in the aqueous fraction, indicating that the activity was polar.

1. Bi-directional GABA-transport was studied by performing uptake and superfusion experiments in human embryonic kidney 293 cells stably expressing the rat GABA transporter rGAT-1. 2. K(M) and V(max) values for [(3)H]-GABA uptake were 11.7+/-1.8 microM and 403+/-55 pmol min(-1) 10(-6) cells (n=9), respectively. 3. Kinetic analysis of outward transport was performed by pre-labelling the cells with increasing concentrations of [(3)H]-GABA and triggering outward transport with 333 microM GABA. Approximate apparent K(M) and V(max) values were 12 mM and 50 pmol min(-1) 10(-6) cells, respectively. 4. GABA re-uptake inhibitors (RI; e.g. tiagabine), as well as, substrates of the rGAT-1 (e.g. GABA, nipecotic acid) concentration dependently decreased [(3)H]-GABA uptake and increased efflux of [(3)H]-GABA from pre-labelled cells. The IC(50) values for inhibiting uptake and the EC(50) values for increasing efflux were significantly correlated (r(2)=0.99). 5. On superfusion, RI antagonized the efflux-enhancing effect of the substrates. The effect of the latter was markedly augmented in the presence of ouabain (100 microM), whereas the effect of RI remained unchanged. The most likely explanation for the release enhancing effect of RI is interruption of ongoing re-uptake. 6. The structural GABA-analogue 2,4-diamino-n-butyric acid (DABA) exhibited a bell-shaped concentration response curve on [(3)H]-GABA efflux with the maximum at 1 mM, and displayed a deviation from the sigmoidal inhibition curve in uptake experiments in the same concentration range. At concentrations below 1 mM, DABA inhibited [(3)H]-GABA uptake non-competitively, while at 1 mM and above the inhibition of uptake followed a competitive manner. 7. The results provide information of GABA inward and outward transport, and document a complex interaction of the rGAT-1 with its substrate DABA.

To assess the validity and practicality of real time polymerase chain reaction (PCR) for human papillomavirus (HPV) testing in combination with liquid based cytology samples for cervical screening.Real time PCR using consensus (GPS+/6+) and type specific primers was developed to detect genital HPV types. This provides rapid, efficient amplification followed by denaturation of the product and computer analysis of the kinetics data that are generated. Liquid based cytology samples were obtained from patients attending routine cervical screening clinics. DNA was extracted from the residual cellular suspension after cytology using spin columns.Real time PCR successfully distinguished between HPV-16 and HPV-18 on the basis of amplification with consensus primers followed by DNA melting temperature (Tm) analysis. Sensitivities of one to 10 copies of HPV-16 (mean Tm = 79.4 degrees C; 2 SD, 0.8) and four to 40 copies of HPV-18 (mean Tm = 80.4 degrees C; 2 SD, 0.4) were obtained. In a mixed population of SiHa and HeLa cells containing known copy numbers of HPV-16 and HPV-18 genomes, HPV-16 and HPV-18 products were clearly separated by Tm analysis in mixtures varying from equivalence to 111000. Together with detailed melt analysis, type specific primers from the same region of the L1 gene confirmed the differential ability of this system. The method was applied to 100 liquid based cytology samples where HPV status using conventional GP5+/6+ PCR was already known. There was 95% agreement between the methods, with 55 positives detected by conventional PCR and 59 with real time PCR. The method was then tested on 200 routine liquid based cytology samples. Approximately 10% were positive by real time PCR, most of which were classified as HPV-16 by detailed melt analysis. Thirteen (6.8%) HPV positives were identified in 189 samples showing no evidence of cervical cytological abnormality.Real time PCR is a rapid, efficient method for the detection of HPV with the separation of HPV-16 and HPV-18 on the basis of differential Tm. Preliminary results suggest it could prove

Background/Aims - In Epstein-Barr virus (EBV) positive cell lines that are stably infected, three different promoters are known to direct the transcription of EBV nuclear antigen 1 (EBNA1). These are located in the BamHI-C, BamHI-Q, and BamHI-F regions of the viral genome (Cp, Qp, and Fp, respectively). Fp is activated upon induction of the viral lytic cycle. The aim of this study was to investigate the activity of Fp in EBV associated diseases. Methods - Using reverse transcriptase polymerase chain reaction, a qualitative analysis of EBNA1 promoter usage in various EBV associated diseases was performed. Results - Fp driven transcription was detected in the context of primary infection and/or lytic replication; at least a portion of the Fp driven transcripts encoded EBNA1. Qp driven EBNA1 transcripts were detected in most samples across the range of disorders tested. Cp driven EBNA1 transcripts were detected in the context of immune suppression and in samples containing EBV positive (nonneoplastic) lymphoid cells. Conclusions - These results confirm the previously proposed housekeeping function of the Qp promoter., published_or_final_version

The effect of 22 technological waste water samples and of some standards was tested on bacteria, fungi, chlorococcal algae, flagellata, plant cells, cells of Tubifex tubifex, hamster cells V79 and the fish Lebistes reticulatus. Of these 22 samples, some inhibition of cell life processes was displayed by the black liquor formed in the production of paper pulp and viscose pulp, by the waste solution produced during the preparation of bleaching agents for paper pulp and viscose pulp, and by the residual liquor after hypochlorite treatment of paper pulp.

SUMMARYTo assess the potential of fomites and environmental surfaces as vehicles in the transmission of rotaviral diarrhoea, disks (1 cm diameter) of various porous and non-porous materials were contaminated with about 105plaque-forming units of the Wa strain of human rotavirus (HRV) suspended in faecal matter. The contaminated disks were then held for 10 days at either room temperature (22±2 °C) or 4°C with the relative humidity (RH) at the high (85±5%), medium (50±5%) or low (25±5%) level. Survival was longer on non-porous surfaces at the lower temperature and at lower humidity. In contrast, survival on porous surfaces was very variable; better on cotton-polyester than on poster card or paper currency on which HRV survived very poorly. These results suggest that under the right environmental conditions, HRV-contaminated objects could play a role in the transmission of rotavirus infections in hospitals, nursing homes and day-care centres.

Conventional cleavage of linked polypeptide chains by heating in SDS can so alter molecular structure as to interfere with antibody binding, on which both immunoprecipitation and 'western blotting' depend. As an alternative, gentle treatment with acid at room temperature or at 0 degrees C was effective in separating the alpha and beta chains of human MHC Class II glycoprotein dimers and proved superior in terms of preservation of at least one labile epitope on the beta chain.

LAV/HTLV-III has been closely linked to the acquired immunodeficiency syndrome (AIDS). We have studied and correlated the prevalence of AIDS-associated retrovirus and retroviral antibodies in several groups of male homosexuals from Greenwich Village. Retrovirus was detected in cultured peripheral blood lymphocytes by testing for reverse transcriptase (RT) and confirmed by establishment of virus-producer cell lines, and electron microscopy. Seventy-six percent of patients with AIDS, 93% with AIDS-related complex (ARC), 69% with generalized lymphadenopathy (LAS), and 35% of asymptomatic homosexuals were positive for virus in the RT assay. Transmission of the virus from RT-positive lymphocytes into the CEM cell line was successful in 10 of 11 randomly chosen cases. No virus isolates were obtained from lymphocytes of 8 heterosexual individuals. Serum antibodies against AIDS-associated virus were detected by indirect immunofluorescence assay and confirmed by Western blotting, using an LAV/HTLV-III-producer cell line, LAV-N1, which we established. LAV/N1 virus was purified by ultracentrifugation through sucrose gradient and the pattern of its proteins was determined by SDS-gel electrophoresis and Western blotting using sera from an AIDS patient. The major polypeptides of LAV/HTLV-III (19, 25-27, 32, 42 and 54 kilodalton) were present. These proteins did not react in Western blots with sera positive for Adult T cell leukemia virus (ATLV). thus, LAV-N1 and ATLV were not antigenically related. In our assay for LAV/HTLV-III antibodies, 18 (100%) of patients with AIDS, 13 (100%) of patients with ARC, 24 (69%) of 35 patients with LAS and 9 (39%) of 23 asymptomatic homosexuals were sero-positive. Heterosexual controls were negative. All IF-positive sera tested by Western blot contained antibodies against specific viral proteins. High titers (greater than or equal to 1:1280) of serum antibodies against LAV/HTLV-III virus were detected in 71% of AIDS patients, 62% with ARC, 38% LAS and 13% among asymptomatic homosexuals. Our data show that the presence of LAV/HTLV-III antibodies correlates with the presence of infectious virus. Antibody titers may also correlate with progression toward AIDS.

Several groups have attempted to identify the EGF receptor by a variety of biochemical techniques. Das et al. [l] identified the EGF receptor on 3T3 cells as a radioactive band of M, = 190 000 by photoaffmity labeling with a ‘251-EGF probe; Hock et al. [2] identified the EGF receptor in human placenta as a doublet of 160 000 and 180 000 M, by covalent cross-linking to ‘251-labeled EGF. The EGF receptor on A-43 1 cells was identified [3] as a radioactive band of M, 175 000 by ‘direct labeling’, which is accomplished by incubation of cells with 1251-EGF. Cohen and coworkers [4] have partially purified the EGF receptor of A-43 1 cells by affinity chromatography and analyzed the denatured proteins of such preparations by SDS-polyacrylamide gel electrophoresis. They found numerous protein bands in the affinity-purified preparations and suggested that a major protein band of M, 150 000 is the receptor for EGF in A-431 cells. More recently, Hunter and Cooper [S] isolated the EGF receptor from 32P-labeled A-43 1 cells by immunoprecipitation with an antiserum raised against crude plasma membrane from A-431 cells. They have estimated the M, of the EGF receptor present in the immunoprecipitates from A-43 1 cells as 155 000. The interaction of EGF with its membrane receptor, present in both crude plasma membranes from A-431 cells and in affinity-purified prepara