Search

Photocatalytic water splitting is a promising approach to solar-to-fuel conversion. In recent years, graphitic carbon nitride (g-C3N4) has triggered worldwide interest due to its eco-friendliness, low cost, and visible-light activity as a semiconductor polymer photocatalyst. However, rapid recombination of photoinduced charge carriers and low efficiency are key issues hindering the practical application of g-C3N4 in the efficient photocatalytic hydrogen (H2) production field. Herein, we fabricate a novel g-C3N4-based composite coupled with levorotatory-tryptophan (denoted as CN/L-trp) through π–π interactions and hydrogen bonds to improve the photocatalytic performance. The redox amino acid L-trp small biomolecules act as a hole relay and thus accelerate the transfer process of holes from g-C3N4 to triethanolamine (TEOA), which leads to more electrons shuttled to a Pt cocatalyst, and finally boosts the visible-light photocatalytic H2 evolution reaction (HER). When introducing 10 wt% L-trp, the photocatalytic H2 production rate of g-C3N4/10 wt% L-trp (CN/10 wt% L-trp) loaded with 1.0 wt% Pt cocatalyst composite is prominently enhanced up to 1046.0 μmol h−1 g−1, which is four times that of g-C3N4 loaded with 1.0 wt% Pt cocatalyst (260.2 μmol h−1 g−1). Our study provides a novel strategy to develop an efficient, green and stable g-C3N4-based hybrid photocatalyst for potential application in solar-to-hydrogen energy conversion.

Lipid-like pseudo-double-chained catanionic surfactants have emerged as the attractive materials to prepare potential vesicular carriers in drug and gene delivery applications. In particular, the semi-spontaneous process has been developed to fabricate ethosome-like catanionic vesicles for the transdermal drug delivery. In this work, Arbutin (a water-soluble drug) encapsulation efficiency of ethosome-like catanionic vesicles fabricated from decyltrimethylammonium-tetradecylsulfate (DeTMA-TS, CH3(CH2)9 N(CH3)3-CH3(CH2)13SO4) and decyltrimethylammonium-dodecylsulfate (DeTMA-DS, CH3(CH2)9N(CH3)3-CH3(CH2)11SO4) with various amounts of ethanol and cholesterol in tris buffer solution was experimentally determined. A simple unilamellar vesicle (ULV) model, resulting in the theoretical encapsulation efficiency within ±10% error for most vesicle compositions, was also developed. Such agreement indirectly confirmed the formation of unilamellar vesicles by the preparation method. Stable ethosome-like catanionic vesicles by using catanionic surfactants with the aid of suitable amounts of ethanol and cholesterol, which led to polydispersity index (PDI) values of vesicle size distribution less than 0.3, were successfully prepared and their hydrophilic drug encapsulation efficiencies can be accurately predicted. Furthermore, the linear correlations of the trap volume ratio with both vesicle size and concentration of the extra added CHOL also provide important guidelines for controlling the drug loading of ethosome-like catanionic vesicles. The accomplishments reached for the novel vesicles are useful for developing their transdermal drug delivery applications.

Background/aim Nuclear factor kappa B (NF-κB) inactivation and apoptosis activation have been shown to enhance the anticancer effect of cisplatin in oral squamous cell carcinoma (OSCC). Amentoflavone may suppress NF-κB activity and trigger apoptosis in different types of cancer. The aim of this study was to investigate the anticancer effect and mechanism of amentoflavone in combination with cisplatin in OSCC. Materials and methods We investigated the combination effect and mechanism of amentoflavone and cisplatin via cell viability analysis, flow cytometry-based apoptosis analyses, transwell migration/invasion assay, immunofluorescence staining and western blotting assay. Results Both amentoflavone and QNZ (NF-κB inhibitor) significantly increased cisplatin-induced cytotoxicity. Amentoflavone reduced cisplatin-triggered NF-κB activity and enhanced cisplatin-induced intrinsic caspase-dependent and independent apoptotic pathways. Moreover, amentoflavone augments cisplatin-suppressed invasion and migration ability of OSCC cells. Conclusion Inactivation of NF-κB and induction of apoptosis through intrinsic caspase-dependent and independent apoptotic pathways are associated with amentoflavone enhanced anti-OSCC efficacy of cisplatin.

Photodynamic therapy (PDT), which involves the generation of reactive oxygen species (ROS) through interactions of a photosensitizer (PS) with light and oxygen, has been applied in oncology. Over the years, PDT techniques have been developed for the treatment of deep-seated cancers. However, (1) the tissue penetration limitation of excitation photon, (2) suppressed efficiency of PS due to multiple energy transfers, and (3) insufficient oxygen source in hypoxic tumor microenvironment still constitute major challenges facing the clinical application of PDT for achieving effective treatment. We present herein a PS-independent, ionizing radiation-induced PDT agent composed of yttrium oxide nanoscintillators core and silica shell (Y2O3:Eu@SiO2) with an annealing process. Our results revealed that annealed Y2O3:Eu@SiO2 could directly induce comprehensive photodynamic effects under X-ray irradiation without the presence of PS molecules. The crystallinity of Y2O3:Eu@SiO2 was demonstrated to enable the generation of electron-hole (e--h+) pairs in Y2O3 under ionizing irradiation, giving rise to the formation of ROS including superoxide, hydroxyl radical and singlet oxygen. In particular, combining Y2O3:Eu@SiO2 with fractionated radiation therapy increased radio-resistant tumor cell damage. Furthermore, photoacoustic imaging of tumors showed re-distribution of oxygen saturation (SO2) and reoxygenation of the hypoxia region. The results of this study support applicability of the integration of fractionated radiation therapy with Y2O3:Eu@SiO2, achieving synchronously in-depth and oxygen-insensitive X-ray PDT. Furthermore, we demonstrate Y2O3:Eu@SiO2 exhibited radioluminescence (RL) under X-ray irradiation and observed the virtually linear correlation between X-ray-induced radioluminescence (X-RL) and the Y2O3:Eu@SiO2 concentration in vivo. With the pronounced X-RL for in-vivo imaging and dosimetry, it possesses significant potential for utilization as a precision theranostics producing highly efficient X-ray PDT for deep-seated tumors.

We have investigated the influence of graphene nanoplatelet scaffolds for dental pulp cells (DPSCs) made from poly(4-vinylpyridine) (P4VP) either via spin-casting flat films or electrospinning nano- and microscale fibers. We found that graphene predominated over other factors in promoting differentiation of DPSCs. In the absence of graphene, real-time-polymerase chain reaction (RT-PCR) and energy dispersive X-ray (EDX) analyses indicated that the DPSCs differentiated along odontogenic lineages only on the nano- and microelectrospun scaffolds. Closer scanning electron microscopy (SEM) imaging revealed formation of banded collagen structures, which nucleated on the electrospun fibers in the absence of graphene. Biomineral deposition was templated on these fibers, with mineral to protein ratios similar to dentin. In the microfibers, the graphene was completely encapsulated and appeared to hinder biomineralization. Previously minimal biomineralization and banded collagen were observed on flat spun cast substrates. Addition of graphene appeared to induce nucleation of banded collagen fibers and template biomineral deposition. Addition of graphene did not affect the outcome of the DPSCs cultured on the nanofibers, which biomineralized regardless of graphene inclusion. Based on these results, we hypothesize that direct contact with graphene is the primary factor determining differentiation of the DPSCs. On the flat surface and nanoscale electrospun fibers, the graphene protrudes from the sample enabling direct contact with the extracellular matrix (ECM) and cells, while on the microfibers, the graphene is fully encapsulated within the matrix. TUNA imaging with scanning force microscopy showed enhanced conductivity on fibers with encapsulated graphene, which we hypothesize may change the conformation of adsorbed ECM proteins, affecting DPSCs differentiation.

A combination of fused deposition modeling printing with atomic layer deposition (ALD) of titania was designed to achieve templated biomineralization and terminal odontogenic differentiation of dental pulp stem cells on three-dimensional (3D) printed polylactic acid (PLA) scaffolds. In the absence of the ALD-deposited titania coating, we had previously shown that both plating efficiency and differentiation are adversely impacted when scaffolds are produced by 3D printing rather than traditional polymer molding. These differences were removed when both printed and molded structures were coated with ALD of titania, which improved the outcomes regardless of the manufacturing method. In this case, on all titania-coated substrates, the plating efficiency increased, copious mineral deposition was observed, and RT-PCR indicated a significant upregulation of osteocalcin, a gene associated with mineral deposition. The influence of additional coatings of collagen, gelatin, or fibronectin on the ALD titania-coated and uncoated PLA-printed and molded scaffolds was also investigated. Upregulation of the odontogenic late-stage differentiation sibling protein, dentin sialoprotein, was observed on the collagen ALD-titania-coated scaffolds and to a lesser extent on the gelatin ALD-titania-coated scaffolds.

Orchids are the most species-rich plants and highly interactive with pollinators via visual or olfactory cues. Biosynthesis and emission of volatile organic compounds (VOCs) to the atmosphere facilitate the olfactory cues and ensure successful pollination. Phalaenopsis bellina is a scented orchid with monoterpenes as major VOCs, comprising linalool, geraniol, and their derivatives. Comparative transcriptomics analysis identified four terpene synthase-b (TPS-b) genes and two TPS-e/f genes with differential gene expression between scented and scentless Phalaenopsis species. Here, we confirmed their differential expression between scented and scentless Phalaenopsis orchids and excluded one TPS-b candidate. We analyzed the temporal and spatial expression and functionally characterized these TPSs. Both TPS-b and TPS-e/f genes showed an increased expression on blooming day or 3 days post-anthesis (D + 3) before the optimal emission of floral scent on D + 5, with especially high expression of PbTPS5 and PbTPS10. The TPS-b genes are expressed exclusively in reproductive organs, whereas the TPS-e/f genes are expressed in both reproductive and vegetative organs. In planta functional characterization of both PbTPS5 and PbTPS10 in tobacco and scentless Phalaenopsis plants did not produce terpenoids. Further ectopic expression in scented Phalaenopsis cultivar P. I-Hsin Venus showed that linalool was the main product, with PbTPS10 displaying 3-fold higher activity than PbTPS5. On in vitro enzyme assay with purified recombinant TPS-b proteins ectopically expressed in Escherichia coli, geraniol was the product catalyzed by PbTPS5 and PbTPS9. PbTPS3 was a linalool/(β)-cis-ocimene synthase and PbTPS4 a linalool synthase. In conclusion, both TPS-b and TPS-e/f enzymes orchestrated floral monoterpene biosynthesis in P. bellina.

Terpenoids are the largest class of plant secondary metabolites and are one of the major emitted volatile compounds released to the atmosphere. They have functions of attracting pollinators or defense function, insecticidal properties, and are even used as pharmaceutical agents. Because of the importance of terpenoids, an increasing number of plants are required to investigate the function and evolution of terpene synthases (TPSs) that are the key enzymes in terpenoids biosynthesis. Orchidacea, containing more than 800 genera and 28,000 species, is one of the largest and most diverse families of flowering plants, and is widely distributed. Here, the diversification of the TPSs evolution in Orchidaceae is revealed. A characterization and phylogeny of TPSs from four different species with whole genome sequences is available. Phylogenetic analysis of orchid TPSs indicates these genes are divided into TPS-a, -b, -e/f, and g subfamilies, and their duplicated copies are increased in derived orchid species compared to that in the early divergence orchid, A. shenzhenica. The large increase of both TPS-a and TPS-b copies can probably be attributed to the pro-duction of different volatile compounds for attracting pollinators or generating chemical defenses in derived orchid lineages; while the duplications of TPS-g and TPS-e/f copies occurred in a species-dependent manner.

Background: The quick, easy, cheap, effective, rugged, and safe method, generally applied to the determination of pesticide residues in food, has been recently modified and adopted for the analysis of pesticide residues worldwide, including Taiwan. Objective: The method still needs to be improved, particularly in efficiency and normalization, because the time costs 20–30 min for extraction and cleanup of multiple pesticides in every food. Methods: In this study, we present a highly efficient and simple sample preparation method that was developed for the determination of 380 pesticide residues in food, including mangoes, scallions, bok choy, apples, carrots, and pea seedlings. The homogenized 1 g samples mixed with 5 mL 1.0% acetic acid in acetonitrile were pushed through the FaPEx® (fast pesticide extraction) kits in a dropwise manner to obtain sample extracts. The total processing time was less than 15 min. The extracts were subject to chromatographic separation followed by GC–tandem MS (MS/MS) and LC–MS/MS analysis. Results: For more than 270 pesticide residues in these foods, the test gave acceptable mean recoveries, ranging between 70 and 120%, and relative SDs below 20%. The LOQ was at least 0.01 mg/kg for 380 pesticides. Conclusions: The developed method can greatly reduce the time needed for multiple pesticide residues analysis. Highlights: FaPEx is used for the extraction of pesticide residues that relies on single-use pre-filled sealed cartridges. FaPEx diminishes operation time, glassware demand, and laboratory space requirement. It also significantly decreases the amount of chemical solvents.

Furfuryl alcohol (C5H6O2) (FA) was used as the precursor for the synthesis of approximately 1.0 mm sized polymeric beads (PFAB) via suspension polymerization. The polymeric beads were carbonized and activated to synthesize porous carbon beads (PFAB/C/A) as an efficient adsorbent for gaseous volatile organic compounds (VOCs). Surface characterization tests revealed the material to be predominantly microporous with the specific surface area measured to be ∼446 m2/g. Raman measurements revealed a graphitic characteristics of PFAB/C/A. Adsorption tests were performed in a fixed tubular packed bed adsorber under different operating conditions: amounts of adsorbents (2–6 g), gas flow rates (0.2–0.4 standard cc per min), adsorption temperatures (40–60 °C), VOC concentrations (2000–53,300 ppm) and types of VOCs (toluene and benzene). The tests revealed high adsorption capacities of the synthesized material i.e., 515 and 350 mg/g for toluene and benzene, respectively at 50 °C. This study has clearly shown that the biomass-based environmentally benign FA can be a potential alternative precursor to the synthetic petro-based polymers presently used for preparing carbon-based adsorbents.

Polymer pollution from nonbiodegradable polymer blends is a source of increasing environmental concern. The obvious solution, the replacement of petroleum-based polymers with biodegradable polymers...

We have shown that materials other than hydrogels commonly used in tissue engineering can be effective in enabling differentiation of dental pulp stem cells (DPSC). Here we demonstrate that a hydrophobic elastomer, polyisoprene (PI), a component of Gutta-percha, normally used to obturate the tooth canal, can also be used to initiate differentiation of the pulp. We showed that PI substrates without additional coating promote cell adhesion and differentiation, while their moduli can be easily adjusted either by varying the coating thickness or incorporation of inorganic particles. DPSC plated on those PI substrates were shown, using SPM and hysitron indentation, to adjust their moduli to conform to differentially small changes in the substrate modulus. In addition, optical tweezers were used to separately measure the membrane and cytoplasm moduli of DPSC, with and without Rho kinase inhibitor. The results indicated that the changes in modulus were attributed predominantly to changes within the cytoplasm, rather than the cell membrane. CLSM was used to identify cell morphology. Differentiation, as determined by qRT-PCR, of the upregulation of OCN, and COL1α1 as well as biomineralization, characterized by SEM/EDAX, was observed on hard PI substrates in the absence of induction factors, i.e. dexamethasone, with moduli 3–4 MPa, regardless of preparation. SEM showed that even though biomineralization was deposited on both spun cast thin PI and filled thick PI substrates, the minerals were aggregated into large clusters on thin PI, and uniformly distributed on filled thick PI, where it was templated within banded collagen fibers. Statement of Significance This manuscript demonstrates the potential of polyisoprene (PI), an elastomeric polymer, for use in tissue engineering. We show how dental pulp stem cells adjust their moduli continuously to match infinitesimally small changes in substrate mechanics, till a critical threshold is reached when they will differentiate. The lineage of differentiation then becomes a sensitive function of both mechanics and morphology for a given chemical composition. Since PI is a major component of Gutta-percha, the FDA approved material commonly used for obturating the root canal, this work suggests that it can easily be adapted for in vivo use in dental regeneration.

We have adapted the two-phase Brust method to synthesize large quantities of AuPd alloy nanoparticles with diameter of 1.86 ± 0.40 nm. When the particles were spread at the air/water interface of a Langmuir–Blodgett (LB) trough, they exhibited a distinct pressure area isotherm curve. The X-ray reflectivity (XRR) shows the formation of an incompressible monolayer with uniform thickness of 1.16 ± 0.02 nm at low pressures which collapses to form a second layer with 2.13 nm thickness at higher pressures. High resolution transmission electron microscopy (HRTEM) imaging of the monolayer indicates that the particles are highly crystalline, with well-defined atomic planes and self-assembly into a hexagonal structure. Extended X-ray absorption fine structure (EXAFS) analysis of the LB lift-off films only shows Au–Au and Au–Pd configurations, consistent with the formation of random alloy rather than core–shell structure. When the particle monolayer was lifted onto the Nafion membrane of a proton exchange membrane f...

CpG-oligodeoxynucleotides (CpG-ODNs) mimicking the function of microbial CpG-dideoxynucleotides containing DNA (CpG-DNA) are potent immune stimuli. The immunostimulatory activity and the species-specific activities of a CpG-ODN depend on its nucleotide sequence properties, including CpG-hexamer motif types, spacing between motifs, nucleotide sequence, and length. Toll-like receptor (TLR) 9 is the cellular receptor for CpG-ODNs in mammalian species, while TLR21 is the receptor in avian species. Mammalian cells lack TLR21, and avian cells lack TLR9, however, both TLRs are expressed in fish cells. While nucleotide sequence properties required for a CpG-ODN to strongly activate mammalian TLR9 and its species-specific activities to different mammalian TLR9s are better studied, CpG-ODN activation of TLR21 is not yet well investigated. Here we characterized chicken and duck TLR21s and investigated their activation by CpG-ODNs. Chicken and duck TLR21s contain 972 and 976 amino acid residues, respectively, and differ from TLR9s as they do not have an undefined region in their ectodomain. Cell-based TLR21 activation assays were established to investigate TLR21 activation by different CpG-ODNs. Unlike grouper TLR21, which was preferentially activated by CpG-ODN with a GTCGTT hexamer motif, chicken and duck TLR21s do not distinguish among different CpG-hexamer motifs. Additionally, these two poultry TLR21s were activated by CpG-ODNs with lengths ranging from 15 to 31 nucleotides and with different spacing between CpG-hexamer motifs. These suggested that compared to mammalian TLR9 and grouper TLR21, chicken and duck TLR21s have a broad CpG-ODN sequence recognition profile. Thus, they could also recognize a wide array of DNA-associated molecular patterns from microbes. Moreover, CpG-ODNs are being investigated as antimicrobial agents and as vaccine adjuvants for different species. This study revealed that there are more optimized CpG-ODNs that can be used in poultry farming as anti-infection agents compared to CpG-ODN choices available for other species.

Eventhough it is well established that materials can promote stem cell differentiation, hard tissue formation is a templated process for which little is known regarding the in vitro process. We have found that surface curvature enables self-assembly of triple helical collagen fibrils into banded bundle structures from rat tail and human collagen secreted by dental pulp stem cells. Collagen fibrils were adsorbed at 4 °C on spun cast flat P4VP films and electrospun fibers. Protein adsorption was observed on both surfaces, but large banded bundles with a uniform spacing of approximately 55 nm were present only on the fiber surfaces. SEM/EDS mapping showed that dental pulp stem cells plated on the same surfaces biomineralized copiously only along the electrospun fibers. Raman spectroscopy indicated that despite the presence of adsorbed collagen on the flat surfaces, only the deposits present on the fibrous surface had a protein to hydroxyl apatite ratio similar to natural dentin from human teeth. RT-PCR indicated up regulation of collagen, osteocalcin and dental sialophosphate protein, confirming that odontogenic differentiation is promoted only on the fiber scaffolds. Taken together the results indicate that, in addition to surface chemistry, the supermolecular structure of ECM collagen, which is essential in directing DPSCs differentiation and templating biomineralization, can be modified by the underlying surface morphology. Statement of Significance The past decade has been focused efforts in the use of dental pulp stem cells (DPSC) for dental regeneration. Eventhough the factors required for DPSCs differentiation have been well studied, actual mineral deposition, positively identified as dentin, has not been achieved in vitro. Hard tissue is known to be a templated process in vivo where the mineral to protein ratio is tightly controlled via proteins which aid in collagen conformation and mineral sequestration. Here we show that one can mimic this process in vitro via the combination of materials selection and morphology. The material chemistry is shown to induce genetic upregulation the genes responsible for collagen and osteocalcin, while Raman spectroscopy confirms the translation and adsorption the proteins on the substrate. But, we show that the simple presence of collagen is not enough to template actual biomineral deposition similar to that found in vivo. Mineral deposition is a complicated process templated on collagen bundles and mediated by specific sibling proteins that determine the protein to mineral ratio. Here we show that surface curvature can reduce the barrier to collagen bundle formation, directing DPSC differentiation along odontogenic lineage, and subsequently templating actual dentin, comparable to that found in vivo in human teeth.

We have designed and engineered an environmentally sustainable ternary polymer blend with the mechanical properties comparable to high impact resistant conventional polymers under the guidance of the lattice self-consistent field model. In this blend system, poly(methyl methacrylate) (PMMA) was used as the compatibilizer for the poly(lactic acid) (PLA)/poly(butylene adipate-co-butylene terephthalate) (PBAT) blend. We characterized the compatibility of those components and found PMMA was miscible with PLA and partially compatible with PBAT, which allowed it to self-assemble to a nanoscale interfacial layer on the PLA/PBAT interface. This PMMA layer can significantly decrease the interfacial energy and strongly entangle with either PLA or PBAT, resulting in the strengthening of the interface and dramatically enhancement of the impact resistance of the ternary blend. The optimal mechanical performance was achieved when the total PMMA concentration was less than 10 wt %. Higher PMMA content embrittled the ble...

Bimetallic iron/silver (Fe/Ag) core/shell nanoparticles were prepared by chemical reduction from ferrous sulfate in the presence of sodium borohydride as a reducing agent in water, followed then by redox transmetalation with addition of silver nitrate (AgNO3) solution. When the reduction temperature was increased from room temperature to 85 °C, Fe nanoparticles with a reduced crystallite size ranging from 5.5 to 2.0 nm resulted. The particles changed from spherical to plate-like morphology as the temperature reached 85 °C. Addition of trisodium citrate was able to protect the precipitated Fe nanoparticles from oxidation; nonetheless, the citrate would facilitate chelation of the Fe clusters so that dense Fe aggregates with a mean diameter greater than 100 nm were found as the concentration of trisodium citrate exceeded 3.33 mM. A continuous Ag film was formed on the Fe surface by the redox transmetalation. This Ag film became a raspberry structure involving preferential deposition of particulate Ag on the Fe particles when the AgNO3 concentration exceeded 76.9 mM. Magnetic saturation was found to reduce with the increasing Ag concentration in the bimetallic composite nanoparticles.

Bimetallic iron/silver (or Fe@Ag) core/shell nanoparticles were prepared with their surface being modified by adsorption of 2-mercaptoethanol. The adsorption facilitated grafting of organic titanium-containing molecules on the Ag surface, and rendered a uniform deposition of anatase titania (TiO2) layer after solvothermal treatment. The Fe3O4@Ag@TiO2 particles presented a mesoporous TiO2 shell of 10–50 nm in thickness, a Brunauer-Emmett-Teller surface area of ca. 340.7 m2 g−1, a Barrett-Joyner-Halenda average pore size of ca. 5.2 nm, a wormhole-like pore structure, and a magnetic activity with saturation magnetization of 50.33 emu g−1. The TiO2 shell imparted photocatalytic activity on model methylene blue and methyl orange dyes in water under ultraviolet irradiations. Adsorption of the dye molecules on the particle surface was found critically dependent on solution pH, suggesting that electrostatic interactions played an important role. The composite particles were recyclable and could be re-used for the photocatalysis. Ag ions could be released from the enclosed interior through the mesoporous TiO2 shell to the ambient. This gave rise to an additional bactericide activity against model Escherichia coli, in which the efficiency reached 99% under dark conditions over a prolonged period of time (up to 48 h) by the slow release of Ag ions in water.

Continuous carbon fiber-reinforced SiC-matrix composites(C/SiCs) have been developed for key thermal structures of aerospace and hypersonic vehicles, which is important to research on thermal and dynamic behavior of C/SiC composites under hypervelocity impact for understanding the response characteristics of C/SiC composites subjected to shock loading. The projectiles made of C/SiC composites and silicon carbide(SiC) were loaded by two-stage light gas gun to impact C/SiC plates with impact velocities from 1.35 km/s to 3.5 km/s and impact angle of 90°, the damage morphology of C/SiC plates, the evolutionary process of thermal radiation and impact pressure were obtained. The experimental results show that fiber failure of C/SiC composites consumes part of the initial kinetic energy during hypervelocity impact, therefore, the carbon fiber improves the fracture toughness of SiC matrix. Under the experimental conditions given in this paper, the lower impact velocity is, the greater differences of thermal and dynamic response between the two kinds of projectiles are. Compared with SiC projectiles, the C/SiC composite projectiles have longer flash radiant duration and lower flash radiant temperature. However, when the impact velocity is higher, the flash radiant duration and the flash radiant temperature of the two kinds of projectiles are similar due to the fiber fracture of the C/SiC composite, and the peak of flash radiant temperature appears before flash radiant intensity during impact process. For the damage characteristics of C/SiC plates, the higher impact velocity is, the smaller perforation diameter of C/SiC plates is, and the shape is more regular. With the decrease of the impact velocity, the damage morphology of C/SiC plates is irregular, and the matrix powdering is more serious.

Molecular dynamics (MD) simulations were carried out to investigate the conformations of fourth generation polyamidoamine (G4 PAMAM) dendrimer-encapsulated Au nanoparticles (AuNPs) of different sizes at different pH conditions. The consistent valence force field (CVFF) was used to model the interaction between the atoms of G4 PAMAM dendrimer and water molecules as well as their interactions with the Au atoms of AuNP. The many-body tight-binding potential was adopted to describe the interaction between Au atoms. The simulation results show a single G4 PAMAM dendrimer can only partially cover the AuNP when its diameter is larger than 2.3 nm. According to the variations of radius of gyration ( R g ) values, the conformations of PAMAM dendrimers become more compact after covering the AuNP at neutral pH. According to the Stokes–Einstein (SE) relation and the diffusion coefficients obtained by the Einstein equation, it was proposed that both the PAMAM dendrimer conformation and the interaction strength between the PAMAM/AuNP and water molecules have significant influences on the diffusion behaviors of PAMAM/AuNP systems.

Di-(2-ethylhexyl) phthalate (DEHP), the common plasticizer used in the production of polyvinyl chloride, can be converted to the more potent metabolite mono-ethylhexyl phthalate (MEHP). Epidemiological studies have shown an association with elevated induction of rat hepatic cancer and reproductive toxicity in response to MEHP exposure. However, the mechanism of genotoxicity and carcinogenicity induced by MEHP treatment remains unclear. As a means to elucidate the mechanisms of action, lethality and mutagenicity in the adenine phosphoribosyltransferase (aprt+/-) gene induced in several CHO cell types by MEHP were assessed. Dose-response relationships were determined in the parental AA8 cell line, its nucleotide repair-deficient UV5 and base repair-deficient EM9 subclones, and also in AS52 cells harboring the bacterial guanine-hypoxanthine phosphoribosyltransferase (gpt) gene and its derived AS52-XPD-knockdown and AS52-PARP-1-knockdown cells. Treatment of AS52 with MEHP led to intracellular production of reactive oxygen species (ROS) and DNA strand breaks in a dose-dependent manner. Separately, mutations in the gpt gene of AS52 cells were characterized and found to be dominated by G:C to A:T and A:T to G:C transitions. Independent AS52-mutant cell (ASMC) clones were collected for the sequential in vivo xenograft tumorigenic studies, 4 of total 20 clones had aggressive tumor growth. Moreover, microarray analysis indicated miR-let-7a and miR-125b downregulated in ASMC, which might raise oncogenic MYC and RAS level and activate ErbB pathway. Comparative evaluation of the results indicates that the principal mechanism of this mutagenic action is probably to be through generation of ROS, causing base excision damage resulting in carcinogenicity.

Ambient particles comprise approximately 25% of fungal spores, which cause adverse health outcomes such as respiratory diseases, allergy, and infection. In this study, we investigated temporal variations and distributions of ambient fungal spores in an urban area of the Taipei metropolis for over 1 year. A Burkard 7-day volumetric spore trap was used to collect air samples. Samples collected daily were stained, counted, and identified on the basis of morphological characteristics. The associations between fungal spores and environmental parameters were then evaluated through multiple regression analysis. Daily monitoring data revealed a large variation in fungal spore concentrations. Specifically, fungal spores peaked during summer months (June–August) and declined during winter months (December–early March); moreover, the average concentration of total fungal spores was 3,607.97 ± 3,181.81 spores m–3. Ascospores were the most prevalent taxon that was recovered from the samples, followed by basidiospores, Aspergillus/Penicillium, and Cladosporium. Multiple regression analysis revealed that meteorological parameters were the main predictors of fungal concentrations. Temperature, wind speed, and humidity were consistently correlated with total fungi and major fungal taxa, and sunlight had a negative association with ascospores. Among the atmospheric pollutants, particulate matter with an aerodynamic diameter ≤ 10 µm (PM10) and ozone were positively associated with fungal spores. Carbon monoxide (CO) at lag day 1 had a negative association with basidiospores. This is the first study to characterize daily concentrations and determinants of ambient fungal spores in an urban area of Taipei metropolis. The obtained data can be used to evaluate the health impact of fungal spore exposure on the residents of the Taipei metropolitan area.

Herein, we report a new type of biodegradable, high surface-area gold nanodandelions (GNDs). This report possesses important features and some are the first of its kind: (1) the large scale green synthesis of GNDs with high monodispersity and a circa 100% yield with consistent chemistry, manufacturing and controls (CMC); (2) cellular/physiological degradability of GNDs leading to its disassembly into debris, which is indicative of the potential for possible body clearance; (3) precision control of the chemicophysical properties of the GNDs including shape, petal number and size, all can be judiciously fine-tuned by the synthetic parameters; (4) highly efficient radiotheranostics of GNDs encompassing better enhanced computed tomography (CT) contrast and pronounced X-ray induced reactive oxygen species (ROS) generation than conventional spherical gold nanoparticles (AuNP). It is noteworthy that the GNDs demonstrate a unique combinational effect of radiosensitization (production of superoxide anions and hydroxyl radicals) and type II photodynamic interaction (generation of singlet oxygen). Given the above, our reported GNDs are promising in clinical translation as radiotheranostics.

Atopic dermatitis (AD) is the most common childhood skin disease and the first step of atopic march. Perfluoroalkyl substance (PFAS) exposure is associated with atopic diseases, including AD. However, whether PFAS exposure is related to earlier AD onset remains unclear. We aimed to investigate the association between prenatal PFAS exposure and earlier onset of AD in children in a 5-year follow-up study. From 2001 to 2005, 1264 mother-infant pairs were recruited from eight Taiwanese maternity hospitals. PFAS levels were analyzed from cord blood. Information on children's health status, including AD occurrence, was obtained via phone interviews at multiple time points. Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) concentrations were measured by ultra-high performance liquid chromatography/tandem mass spectrometry. Cox proportional hazards models assessed associations between prenatal PFAS exposure and early onset AD. Overall, 863 mother–infant pairs with complete measurements were recruited. The prevalence of physician-diagnosed AD before 5 years of age was 7.1%. PFOA and PFOS concentrations were grouped based on whether they were above the 75th percentile. PFOA exposure was positively associated with earlier onset of AD (Kaplan-Meier estimate, p = 0.014). In the Cox model, after adjusting for sex, family income, parental atopy, breast feeding, and maternal age at childbirth, significance was observed in children above the upper quartile (≥75th) of the PFOA group (hazard ratio: 1.89; 95% confidence interval, 1.10–3.16). Our findings suggested that children with higher prenatal PFOA exposure have a higher risk of earlier AD development. Minimizing early life PFAS exposure may help inhibit AD development.

3,5-Dimethylaniline (3,5-DMA), a monocyclic aromatic amine, is widely present in a spectrum of sources including tobacco, dyes, combustion products, and suspended particulates. 3,5-DMA and its metabolites form superoxides, resulting in apoptosis or oncogenesis. Data of a direct effect of 3,5-DMA on the nervous system, especially the developing brain, are lacking. Therefore, we investigated the effects of 3,5-DMA and its metabolites on fetal neurite growth and brain development using in vitro cell cultures of primary cortical neurons to observe whether these compounds caused neuronal cytotoxicity and affected neurite structural development. With increasing concentrations of 3,5-DMA (10, 50, 100, 500, 1000 μM) and its major metabolite 5-dimethylaminophenol (3,5-DMAP) (10, 50, 100, 500, 1000 μM), reactive oxygen species (ROS), cytotoxicity, and DNA damage increased significantly in the cells and dendritic arborization decreased. The addition of 5 mM N-acetylcysteine, an ROS scavenger, reduced ROS in the cells and alleviated the neuronal damage. In vivo studies in Sprague Dawley pregnant rats suggested that exposure to 3,5-DMA (10, 30, 60, 100 mg/kg/day) subcutaneously from GD15 to GD17 led to fetal cerebral cortex thinning. BrdU labeling showed that 3,5-DMA reduced the number and generation of cortical cells. To detect the laminar position of newly generated neurons, cortex layer markers such as Satb2, Ctip2, and Tbr1 were used. 3,5-DMA perturbed the cortical layer distribution in developing fetal rats. In summary, this is the first study to provide evidence for 3,5-DMA and its metabolites causing anomalies of the fetal central nervous system development through ROS production.

Aim: Skeletal muscle subjected to hypoxia followed by reoxygenation is susceptible to injury and subsequent muscle function decline. This phenomenon can be observed in the diaphragm during strenuous exercise or in pulmonary diseases such as chronic obstructive pulmonary diseases (COPD). Previous studies have shown that PO2 cycling or hypoxic preconditioning (HPC), as it can also be referred to as, protects muscle function via mechanisms involving reactive oxygen species (ROS). However, this HPC protection has not been fully elucidated in aged pulmonary TNF-α overexpressing (Tg+) mice (a COPD-like model). We hypothesize that HPC can exert protection on the diaphragms of Tg+ mice during reoxygenation through pathways involving ROS/phosphoinositide 3-kinase (PI3K)/protein kinase B (Akt)/extracellular signal regulated kinase (ERK), as well as the downstream activation of mitochondrial ATP-sensitive potassium channel (mitoKATP) and inhibition of mitochondrial permeability transition pore (mPTP).Methods: Isolated Tg+ diaphragm muscle strips were pre-treated with inhibitors for ROS, PI3K, Akt, ERK, or a combination of mitoKATP inhibitor and mPTP opener, respectively, prior to HPC. Another two groups of muscles were treated with either mitoKATP activator or mPTP inhibitor without HPC. Muscles were treated with 30-min hypoxia, followed by 15-min reoxygenation. Data were analyzed by multi-way ANOVA and expressed as means ± SE.Results: Muscle treated with HPC showed improved muscle function during reoxygenation (n = 5, p < 0.01). Inhibition of ROS, PI3K, Akt, or ERK abolished the protective effect of HPC. Simultaneous inhibition of mitoKATP and activation of mPTP also diminished HPC effects. By contrast, either the opening of mitoKATP channel or the closure of mPTP provided a similar protective effect to HPC by alleviating muscle function decline, suggesting that mitochondria play a role in HPC initiation (n = 5; p < 0.05).Conclusion: Hypoxic preconditioning may protect respiratory skeletal muscle function in Tg+ mice during reoxygenation through redox-sensitive signaling cascades and regulations of mitochondrial channels.

Paraquat (PQ), a broad-spectrum contact herbicide, has been used in many countries for controlling weed growth in agriculture because of its quick-acting and nonselective contact with green plant tissue. PQ is also toxic to humans, and even contributes to the development of neurodegenerative diseases. However, PQ is generally excluded from pesticide residue monitoring programs due to the lack of suitable determination methods. Thus, this study developed a detection method combined with simple extraction and surface-enhanced Raman spectroscopy (SERS) to rapidly determine and quantify the PQ residue on legumes without destructive procedures and high-cost instruments. Following the extraction procedure of the QuPPe-method, however, we took whole adzuki beans (Vigna angularis) extracted via a mixture of methanol and 1% formic acid at room temperature and followed by a 1 min cleanup by SPE. The PQ values for adzuki beans determined by LC/MSMS showed that regardless of whether extraction was followed by the QuPPe-method or the method we proposed, a consistent and low relative standard deviation (RSD) below

Objective: Intervertebral disc (IVD) degeneration and disc herniation are major causes of lower back pain, which involve the presence of inflammatory mediators and tissue invasion by immune cells. Intercellular adhesion molecule 1 (ICAM1, also termed CD54) is an adhesion molecule that mediates cell-cell interactions, particularly between immune cells and target tissue. The aim of this study was to examine the intracellular signaling pathways involved in inflammatory stimuli-induced ICAM1 expression in human anulus fibrosus (AF) cells. Methods: Quantitative reverse transcription-polymerase chain reaction (qPCR), western blotting, and flow cytometry were performed to dissect the roles of different signaling pathways in inflammatory stimuli-mediated ICAM1 expression. Results: Using qPCR and western blot analyses, a significant increase in ICAM1 expression was observed in AF cells after stimulation of lipopolysaccharide (LPS) plus interferon-gamma (IFN&gamma, ) in a time-dependent manner. Flow cytometry revealed ICAM1 upregulation on the surface of AF cells. Importantly, LPS plus IFN&gamma, treatment also significantly promoted Chemokine ligand (CCL)2 expression, but not CCL3. The enhanced ICAM1 expression was abolished after incubation with antibody against CCL2. In AF cells, treatment with LPS plus IFN&gamma, activated the FAK/ERK/GSK3 signaling pathways, promoted a time-dependent increase in PKC&delta, phosphorylation, and promoted PKC&delta, translocation to the nucleus. Treatment with the pharmacological PKC&delta, inhibitor, rottlerin, effectively blocked the enhanced productions of ICAM1 and CCL2. Conclusions: Inflammatory stimuli in AF cells are part of a specific pathophysiology in IVD degeneration and disc herniation that modulates CCL2/ICAM1 activation through the FAK/ERK/GSK3 and PKC&delta, signaling pathways in AF cells.

This study investigates the interfacial strengths between polypropylene (PP)/carbon fiber (CF) composites through experimental observation as well as using molecular dynamics (MD) simulation to determine optimal chemical functionalization groups for four PP/CF composites. First, the structures of PP/CF, PP-graft-maleic anhydride (PP-MAH)/CF, PP-MAH/CF-NH2 (2%) and PP-MAH/CF-NH2 (5%) were constructed to obtain stable interface structures by the simulated-annealing procedure, and these structures were further used to evaluate the interface bonding strength. The study found that the degrees of crystallinity of PP and PP-MAH at the interfaces are significantly improved when compared to those of the pristine structure. The results show, through the interaction energy per unit area and the tensile simulation mechanical strength, that the strengths of the modified PP/functionalized-CF are higher. Finally, the MD simulation results of the modified PP and functionalized-CF composites are demonstrated to provide an economical and quick approach to examine the mechanical properties of a polymer composite system before conducting an experiment. Such MD results can be utilized to guide both the design of polymer/carbon fiber composites and to select proper functionalized groups.

Herein, a hyphenated system combining a high-throughput solid-phase extraction (htSPE) microchip with inductively coupled plasma-mass spectrometry (ICP-MS) for rapid determination of trace heavy metals was developed. Rather than performing multiple analyses in parallel for the enhancement of analytical throughput, we improved the processing speed for individual samples by increasing the operation flow rate during SPE procedures. To this end, an innovative device combining a micromixer and a multi-channeled extraction unit was designed. Furthermore, a programmable valve manifold was used to interface the developed microchip and ICP-MS instrumentation in order to fully automate the system, leading to a dramatic reduction in operation time and human error. Under the optimized operation conditions for the established system, detection limits of 1.64-42.54 ng L(-1) for the analyte ions were achieved. Validation procedures demonstrated that the developed method could be satisfactorily applied to the determination of trace heavy metals in natural water. Each analysis could be readily accomplished within just 186 s using the established system. This represents, to the best of our knowledge, an unprecedented speed for the analysis of trace heavy metal ions.

Using known parameters for the surface and interfacial tension, the work of adhesion of PMMA with PLA and styrenic polymers has been calculated. The results indicated that PMMA, an abundant and economical homopolymer, could serve as an effective compatibilizer, rivaling complex and costly block copolymers for PLA/styrenic blends. Blends of PLA with either SAN or ABS were produced with added 1%–10% PMMA. Tensile and impact toughness data show that the blends display properties comparable to those of PP with only 4% added PMMA. Deuterated-secondary ion mass spectrometry (DSIMS) performed with deuterated PMMA indicated that this corresponded to the formation of an interfacial layer approximately 2Rg thick, as the optimal thickness for integrating two polymers, without the formation of a third brittle layer. Blends with ABS showed an increase of nearly 300% in impact toughness compared to that for polymer containing no PMMA, while blends with SAN formed ideal extruded filaments, which produced 3-D printed structures at least 58% stronger and more ductile than molded PS.

The objective of this paper is to provide a representative and quantitative comparison of physical sputter and chemically enhanced sputter erosion rates (one beam condition each) for commercially available grades of graphite and related materials. The intent is to provide information for more informed selection of materials for implant applications. Carbon based materials such as graphite are extensively used in modern ion implantation tools to meet the need for electrically conductive surfaces that are compatible with stringent requirements for low metals contamination. A wide variety of commercially available grades of graphite are commonly used in areas exposed to the ion beam, however the criteria for choosing a material is largely based on materials characteristics such as density, porosity, grain size, hardness, strength etc. Unfortunately there is little published data on the performance of different types of graphite under direct ion beam bombardment that correlate to these characteristics.

Background/aim A previous study indicated that amentoflavone inhibits tumor growth of breast cancer. However, the anti-cancer effects and mechanism of amentoflavone in hepatocellular carcinoma (HCC) have not been elucidated. The aim of the present study was to verify the effect of amentoflavone on tumor progression in HCC. Materials and methods HCC SK-Hep1 cells were treated with different concentrations of amentoflavone or 10 μM PD98059 (extracellular signal-regulated kinases (ERK) inhibitor) for 48 h, respectively, and then cell viability, NF-κB activation, levels of tumor progression-associated proteins, and cell invasion were evaluated with 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), NF-κB reporter gene assay, western blotting, and cell invasion assay. Results The results demonstrated that both amentoflavone and PD98059 not only significantly reduced cell viability, NF-κB activation, and cell invasion, but also inhibited the expression of tumor progression-associated proteins. In addition, we found that amentoflavone suppresses ERK phosphorylation. Conclusion The results of the present study suggest that amentoflavone down-regulates ERK-modulated tumor progression in HCC.

>The goal of the present study was to investigate anticancer effect of amentoflavone on glioblastoma cells in vitro. Our results demonstrated that amentoflavone not only significantly reduced cell viability, nuclear factor-ĸappa B (NF-ĸB) activation, and protein expression of cellular Fas-associated protein with death domain-like interleukin 1 beta-converting enzyme inhibitory protein (C-FLIP) and myeloid cell leukemia 1 (MCL1), but significantly triggered cell accumulation at the sub-G 1 phase, loss of mitochondrial membrane potential, and expression of active caspase-3 and -8. In order to verify the effect of NF-ĸB inhibitor on expression of anti-apoptotic proteins, we performed western blotting. We found that the of NF-ĸB inhibitor or amentoflavone markedly diminished protein levels of MCL1 and C-FLIP. Taken all together, our findings show that amentoflavone induces intrinsic and extrinsic apoptosis and inhibits NF-ĸB-modulated anti-apoptotic signaling in U-87 MG cells in vitro.

A basic helix-loop-helix transcription factor PbbHLH4 induces the biosynthesis of monoterpenes for floral scent in Phalaenopsis orchids., Floral scent is an important factor in attracting pollinators and repelling florivores. In Phalaenopsis bellina (Orchidaceae), the major floral scent components are monoterpenoids. Previously, we determined that expression of GERANYL DIPHOSPHATE SYNTHASE (PbGDPS) is highly correlated with monoterpene biosynthesis in Phalaenosis orchids. Here, we found that both cis- and trans-regulation were present on the GDPS promoters, with trans-regulation playing a key role. To investigate the regulation of biosynthesis of floral scent, we compared the transcriptomic data of two Phalaenopsis orchids with contrasting scent phenotypes. Eight transcription factors (TFs) that exhibited sequential elevation in abundance through floral development in P. bellina were identified, and their transcript levels were higher in the scented orchid than the scentless one. Five of these TFs transactivated several structural genes involved in monoterpene biosynthesis including PbbHLH4, PbbHLH6, PbbZIP4, PbERF1, and PbNAC1. Ectopic transient expression of each of these TFs in scentless orchids resulted in stimulation of terpenoid biosynthesis. PbbHLH4 most profoundly induced monoterpene biosynthesis, with a 950-fold increase of monoterpenoid production in the scentless orchid. In conclusion, we determined that biosynthesis of orchid floral monoterpenes was sequentially regulated, with PbbHLH4 playing a crucial role for monoterpene biosynthesis.

The overproduction of reactive oxygen species (ROS) has been implicated in the development of various chronic and degenerative diseases such as cancer, respiratory, neurodegenerative, and digestive diseases. Under physiological conditions, the concentrations of ROS are subtlety regulated by antioxidants, which can be either generated endogenously or externally supplemented. A combination of antioxidant-deficiency and malnutrition may render individuals more vulnerable to oxidative stress, thereby increasing the risk of cancer occurrence. In addition, antioxidant defense can be overwhelmed during sustained inflammation such as in chronic obstructive pulmonary diseases, inflammatory bowel disease, and neurodegenerative disorders, cardiovascular diseases, and aging. Certain antioxidant vitamins, such as vitamin D, are essential in regulating biochemical pathways that lead to the proper functioning of the organs. Antioxidant supplementation has been shown to attenuate endogenous antioxidant depletion thus alleviating associated oxidative damage in some clinical research. However, some results indicate that antioxidants exert no favorable effects on disease control. Thus, more studies are warranted to investigate the complicated interactions between ROS and different types of antioxidants for restoration of the redox balance under pathologic conditions. This review highlights the potential roles of ROS and nutritional antioxidants in the pathogenesis of several redox imbalance-related diseases and the attenuation of oxidative stress-induced damages.

The dynamical and thermal behaviors of Au nanoparticle (AuNP) and fourth generation poly(amidoamine) dendrimer (G4 PAMAM) of the dendrimer-encapsulated Au nanoparticle system under the dry environment were investigated by the molecular dynamics (MD) simulation. The consistent valence force field (CVFF) was used to describe the interaction of the G4 PAMAM dendrimer and the interaction between the dendrimer and the AuNP. The many-body tight-binding potential was adopted to describe the atomic interaction between the Au atoms of an AuNP. Three AuNPs, Au116, Au201, and Au405, with the diameters of 1.45, 1.8, and 2.3 nm were concerned, respectively. Au116 and Au201 are nearly completely covered by G4 PAMAM dendrimer, but the branching chains of the dendrimer are no longer able to wrap around the Au405.The conformation of G4 PAMAM dendrimer still possesses its unique spherical structure after encapsulating the AuNP, and the irregularity of the outer surface decreases as the size of the AuNP increases. For the t...

The understanding of complex molecular mechanisms underlying heart failure (HF) is constantly under revision. Recent research has paid much attention to understanding the growing number of patients that exhibit HF symptoms yet have an ejection fraction similar to a normal phenotype. Termed heart failure with preserved ejection fraction (HFpEF), this novel hypothesis traces its roots to a proinflammatory state initiated in part by the existence of comorbidities that create a favorable environment for the production of reactive oxygen species (ROS). Triggering a cascade that involves reduced nitric oxide (NO) availability, elevated ROS levels in the coronary endothelium eventually contribute to hypertrophy and increased resting tension in cardiomyocytes. Improved understanding of the molecular pathways associated with HFpEF has led to studies that concentrate on reducing ROS production in the heart, boosting NO availability, and increasing exercise capacity for HFpEF patients. This review will explore the latest research into the role of ROS and NO in the progression of HFpEF, as well as discuss the encouraging results of numerous therapeutic studies.

An increasing number of studies have proposed a strong correlation between reactive oxygen species (ROS)-induced oxidative stress (OS) and the pathogenesis of Alzheimer’s disease (AD). With over five million people diagnosed in the United States alone, AD is the most common type of dementia worldwide. AD includes progressive neurodegeneration, followed by memory loss and reduced cognitive ability. Characterized by the formation of amyloid-beta (Aβ) plaques as a hallmark, the connection between ROS and AD is compelling. Analyzing the ROS response of essential proteins in the amyloidogenic pathway, such as amyloid-beta precursor protein (APP) and beta-secretase (BACE1), along with influential signaling programs of nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) and c-Jun N-terminal kinase (JNK), has helped visualize the path between OS and Aβoverproduction. In this review, attention will be paid to significant advances in the area of OS, epigenetics, and their influence on Aβplaque assembly. Additionally, we aim to discuss available treatment options for AD that include antioxidant supplements, Asian traditional medicines, metal-protein-attenuating compounds, and histone modifying inhibitors.

Background Phalaenopsis bellina and its closely related species, P. violacea, emit linalool, geraniol and their derivatives as the predominant monoterpenes at the full-bloom stages. Geranyl diphosphate synthase (PbGDPS) is the key enzyme that converts precursors for monoterpene biosynthesis. Besides the monoterpenes being synthesized in concert with floral development stages, we noticed that the scent emission of P. bellina and P. violacea was detected mainly in the daytime. Results The monoterpenes of P. violacea flowers displayed a diurnal emission pattern, which was regulated by an internal oscillator in the treatment of constant light. In contrast, constant dark diminished the scent emission levels, indicating that light also affects monoterpene emission in P. violacea. Further treating P. violacea with various light wavelengths showed that the monoterpene emission was greatest in white light condition. Other Phalaenopsis hybrids, including P. I-Hsin Venus ‘KHM2212’ and P. Meidarland Bellina Age ‘LM128’, responded differently to various light wavelengths but most of them still showed the highest scent emission under the whole spectra of light. A great number of light-responsive, HY5-interacting, and circadian-responsive elements was enriched on the promoters of both structural genes and transcription factors for monoterpene biosynthesis. Furthermore, several putative genes encoding components involved in light and circadian signaling pathways were also identified in the transcriptome of P. bellina flowers at consecutive stages (from the anthesis day to day 7 post anthesis). Conclusions Taken together, both circadian clock and light factors had positive effects on orchid floral scent emission, and the regulation resided on the control of both structural genes and transcription factors for monoterpene biosynthesis.

A multiresidue analytical method was developed for grapes for the following 24 plant growth regulators: 1-naphthylacetamide, 2,3,5-triiodobenzoic acid, 2,4,5-T, 2-naphthoxyacetic acid, 3-indolylacetic acid, 4-(3-indolyl)-butyric acid, 4-chlorophenoxyacetic acid, 4-nitrophenol, 6-benzylaminopurine, N6-isopentenyladenine, butralin, chlormequat chloride, chlorphonim-Cl, cloprop, forchlorfenuron, gibberellic acid 3, gibberellic acid 4, gibberellic acid 7, inabenfide, mepiquat chloride, paclobutrazol, prohydrojasmon, thidiazuron and uniconizole-P. The compounds were extracted from grape samples using an extraction method modified from the Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method. Liquid chromatography – tandem mass spectrometry was used for the detection and quantification of the compounds. Validation of the method was performed by using recovery studies at both intra-day and inter-day intervals, as well as by evaluation of the matrix effect, limit of quantification, trueness and precision. We used matrix-matched calibrations for the quantification of the compounds, which all resulted in determination coefficients (r2) higher than 0.995. The limit of quantification ranged from 0.1 to 5 ng/mL. Recovery studies using three spiking concentrations at varying levels showed recoveries of 70.2–112.6% and 67.5–101.8% at intra-day and inter-day intervals, respectively. Relative standard deviations were below 20% for the recovery studies. The extraction method were further validated by performing recovery study and matrix effect test in six different grape varieties from Taiwan and the United States and all resulted in comparable results. Application of the established method to 50 grape samples, resulted in the detection of chlormequat chloride and forchlorfenuron residues in the tested grapes. The results of the method validation and real sample analysis shows the extraction method is therefore suitable for routine monitoring of residue in grapes. Keywords: Grapes, Liquid chromatography-tandem mass spectrometry, Plant growth regulators, QuEChERS

AIM To investigate the effects of hydrogen-rich water (HRW) treatment on prevention of ethanol (EtOH)-induced early fatty liver in mice. METHODS In vitro reduction of hydrogen peroxide by HRW was determined with a chemiluminescence system. Female mice were randomly divided into five groups: control, EtOH, EtOH + silymarin, EtOH + HRW and EtOH + silymarin + HRW. Each group was fed a Lieber-DeCarli liquid diet containing EtOH or isocaloric maltose dextrin (control diet). Silymarin was used as a positive control to compare HRW efficacy against chronic EtOH-induced hepatotoxicity. HRW was freshly prepared and given at a dosage of 1.2 mL/mouse trice daily. Blood and liver tissue were collected after chronic-binge liquid-diet feeding for 12 wk. RESULTS The in vitro study showed that HRW directly scavenged hydrogen peroxide. The in vivo study showed that HRW increased expression of acyl ghrelin, which was correlated with food intake. HRW treatment significantly reduced EtOH-induced increases in serum alanine aminotransferase, aspartate aminotransferase, triglycerol and total cholesterol levels, hepatic lipid accumulation and inflammatory cytokines, including tumor necrosis factor-alpha (TNF-α) and interleukin (IL)-6. HRW attenuated malondialdehyde level, restored glutathione depletion and increased superoxide dismutase, glutathione peroxidase and catalase activities in the liver. Moreover, HRW reduced TNF-α and IL-6 levels but increased IL-10 and IL-22 levels. CONCLUSION HRW protects against chronic EtOH-induced liver injury, possibly by inducing acyl ghrelin to suppress the pro-inflammatory cytokines TNF-α and IL-6 and induce IL-10 and IL-22, thus activating antioxidant enzymes against oxidative stress.

Skeletal muscle contraction generates reactive oxygen species (ROS), which are signaling molecules involved in exercise and force generation. Although ROS levels are maintained at physiological levels by endogenous antioxidants, exercise can alter the oxidant-antioxidant balance in contracting muscles. Regular exercise strengthens the antioxidant defense system via ROS-mediated adaptive responses, while strenuous exercise induces ROS accumulation and oxidative stress. Excess ROS level damages intracellular components and impairs muscle function, potentially limiting physical performance. The manipulation of antioxidant status can restore redox homeostasis and reduce exercise-induced oxidative damages. However, the effectiveness of antioxidant supplementation is unclear due to the complicated and multifaceted roles of ROS in both exercise-induced oxidative injuries and adaptation. The intensity, duration, and types of exercise are also likely to contribute to the effect of ROS in exercise. This chapter provides an updated discussion on ROS and antioxidants in aerobic and anaerobic exercises as well as their multifaceted effects on oxidative balance and physical performance.

In the present work, ZIF-8/6FDA-durene mixed matrix membranes (MMMs) were synthesized and characterized. ZIF-8 nanocrystals, which were used as the inorganic filler, were synthesized using rapid room-temperature synthesis method whereas 6FDA-durene polyimide was synthesized by polycondensation method followed by chemical imidization. Pure and 6FDA-durene membranes loaded with 5 wt%, 10 wt% and 15 wt% of ZIF-8 were fabricated. The structural properties and morphology of the resultant membranes were characterized by using X-ray Diffraction (XRD) and Field emission scanning electron microscope (FESEM) . The EDX images showed that ZIF-8 particles agglomerated in the polymer matrix. However, no phase separation was observed for all resultant MMMs.

Background and Purpose Infection with Gram-negative bacteria has been recognized as an initiator of rheumatoid arthritis, which is characterized by chronic inflammation and infiltration of immune cells. Carbon monoxide (CO) exhibits anti-inflammatory properties. Here we have investigated the detailed mechanisms of vascular cell adhesion molecule-1 (VCAM-1) expression induced by LPS and if CO inhibited LPS-induced leukocyte adhesion to synovial fibroblasts by suppressing VCAM-1 expression. Experimental Approach Human rheumatoid arthritis synovial fibroblasts (RASFs) were incubated with LPS and/or the CO-releasing compound CORM-2. Effects of LPS on VCAM-1 levels were determined by analysing mRNA expression, promoter activity, protein expression, and immunohistochemical staining. The molecular mechanisms were investigated by determining the expression, activation, and binding activity of transcriptional factors using target signal antagonists. Key Results CORM-2 significantly inhibited inflammatory responses in LPS-treated RASFs by down-regulating the expression of adhesion molecule VCAM-1 and leukocyte infiltration. The down-regulation of LPS-induced VCAM-1 expression involved inhibition of the expression of phosphorylated-NF-κB p65 and AP-1 (p-c-Jun, c-Jun and c-Fos mRNA levels). These results were confirmed by chromatin immunoprecipitation assay to detect NF-κB and AP-1 DNA binding activity. Conclusions and Implications LPS-mediated formation of the TLR4/MyD88/TRAF6/c-Src complex regulated NF-κB and MAPKs/AP-1 activation leading to VCAM-1 expression and leukocyte adhesion. CORM-2, which liberates CO to elicit direct biological activities, attenuated LPS-induced VCAM-1 expression by interfering with NF-κB and AP-1 activation, and significantly reduced LPS-induced immune cell infiltration of the synovium.

This study was designed to examine the potential involvement of reactive oxygen species in skeletal muscle dysfunction linked with stretching in a mouse model and to explore the effects of combined antioxidant intake on peripheral leukocyte apoptosis following eccentrically-biased downhill runs in human subjects. In the mouse model, diaphragmatic muscle was stretched by 30% of its optimal length, followed by 5-min contraction. Muscle function and extracellular reactive oxygen species release was measured ex vivo. In human models, participants performed two trials of downhill running either with or without antioxidant supplementation, followed by apoptotic assay of inflammatory cells in the blood. The results showed that stretch led to decreased muscle function and prominent ROS increase during muscle contraction. In human models, we observed an elevation in circulating leukocyte apoptosis 24-48 hours following acute downhill runs. However, there is an attenuated leukocyte apoptosis following the second bout of downhill run. Interestingly, the combination of ascorbic acid (vitamin C) and α-tocopherol (vitamin E) supplementation attenuated the decrease in B-cell lymphoma 2 (Bcl-2) at 24 hours following acute downhill running. These data collectively suggest that significant ROS formation can be induced by muscle-lengthening associated with eccentric exercise, which is accompanied by compromised muscle function. The combination of antioxidants supplementation appears to have a protective role via the attenuation of decrease in anti-apoptotic protein.

The potential to improve the mechanical, thermal, and optical properties of poly(methyl methacrylate) (PMMA)/clay nanocomposites prepared with clay containing an organic modifier was investigated. Pristine sodium montmorillonite clay was modified using cocoamphodipropionate, which absorbs UVB in the 280–320 nm range, via ion exchange to enhance the compatibility between the clay platelets and the methyl methacrylate polymer matrix. PMMA/clay nanocomposites were synthesized via in situ free-radical polymerization. Three types of clay with various cation-exchange capacities (CEC) were used as inorganic layered materials in these organic–inorganic hybrid nanocomposites: CL42, CL120, and CL88 with CEC values of 116, 168, and 200 meq/100 g of clay, respectively. We characterized the effects of the organoclay dispersion on UV resistance, effectiveness as an O2 gas barrier, thermal stability, and mechanical properties of PMMA/clay nanocomposites. Gas permeability analysis demonstrated the excellent gas barrier properties of the nanocomposites, consistent with the intercalated or exfoliated morphologies observed. The optical properties were assessed using UV–Visible spectroscopy, which revealed that these materials have good optical clarity, UV resistance, and scratch resistance. The effect of the dispersion capability of organoclay on the thermal properties of PMMA/clay nanocomposites was investigated by thermogravimetric analysis and differential scanning calorimetry; these analyses revealed excellent thermal stability of some of the modified clay nanocomposites.

It is well known that regular exercise can benefit health by enhancing antioxidant defenses in the body. However, unaccustomed and/or exhaustive exercise can generate excessive reactive oxygen species (ROS), leading to oxidative stress-related tissue damages and impaired muscle contractility. ROS are produced in both aerobic and anaerobic exercise. Mitochondria, NADPH oxidases and xanthine oxidases have all been identified as potential contributors to ROS production, yet the exact redox mechanisms underlying exercise-induced oxidative stress remain elusive. Interestingly, moderate exposure to ROS is necessary to induce body's adaptive responses such as the activation of antioxidant defense mechanisms. Dietary antioxidant manipulation can also reduce ROS levels and muscle fatigue, as well as enhance exercise recovery. To elucidate the complex role of ROS in exercise, this review updates on new findings of ROS origins within skeletal muscles associated with various types of exercises such as endurance, sprint and mountain climbing. In addition, we will examine the corresponding antioxidant defense systems as well as dietary manipulation against damages caused by ROS.