Search

The advent of lead halide perovskite nanocrystals (NCs), which are easily synthesized, ultralow-cost materials and have an impeccable luminous efficiency, has drastically changed the future perspective of semiconductor quantum dot devices. Although the band gap energy of lead perovskite NCs can be tuned by the halide composition, the instability problem prevails for mixed-halide perovskite NCs, caused by phase segregation due to ion migration when an external electric field or light is applied. To avoid this problem and obtain the stable emission of RGB primary colors, in this study, two synthesis pathways of pure-halide perovskite NCs are proposed. One approach is the modified hot injection method with “centrifugation of a frozen eutectic mixture” to separate small NCs efficiently, and the other is the “low-temperature mixing and heat-up method” for target materials including CsPbI3, CsPbBr3, and CH(NH2)2PbBr3 (FAPbBr3). The emission wavelength of FAPbBr3 is tuned ion-stoichiometrically, unlike Cs perovskites. These various synthesis pathways of pure-halide perovskite NCs enable the efficient production of high-quality perovskite NCs and allow precise tuning of the emission color to the desired wavelength. Although there are still several “gaps” remaining in the available emission wavelength, the new methodology proposed in this study could potentially be employed for manufacturing more stable perovskite NC-based optoelectronic devices.

This paper used finite element analysis of metal forming to study the forging process and die design of aluminum alloy brake parts. According to the process parameters and die design, the brake parts were forged by experiment. First, the die design is based on the product size and considering parting line, draft angle, forging tolerance, shrinkage and scrap. Secondly, the finite element analysis of metal forming is used to simulate the forging process of aluminum alloy brake parts. Finally, the aluminum alloy brake levers with dimensional accuracy and surface hardness were forged.

To establish an ideal microenvironment for regenerating maxillofacial defects, recent research interests have concentrated on developing scaffolds with intricate configurations and manipulating the stiffness of extracellular matrix toward osteogenesis. Herein, we propose to infuse a degradable RGD-functionalized alginate matrix (RAM) with osteoid-like stiffness, as an artificial extracellular matrix, to a rigid 3D-printed hydroxyapatite scaffold for maxillofacial regeneration. The 3D-printed hydroxyapatite scaffold was produced by microextrusion technology and showed good dimensional stability with consistent microporous detail. RAM was crosslinked by calcium sulfate to manipulate the stiffness, and its degradation was accelerated by partial oxidation using sodium periodate. The results revealed that viability of bone marrow stem cells was significantly improved on the RAM and was promoted on the oxidized RAM. In addition, the migration and osteogenic differentiation of bone marrow stem cells were promoted on the RAM with osteoid-like stiffness, specifically on the oxidized RAM. The in vivo evidence revealed that nonoxidized RAM with osteoid-like stiffness upregulated osteogenic genes but prevented ingrowth of newly formed bone, leading to limited regeneration. Oxidized RAM with osteoid-like stiffness facilitated collagen synthesis, angiogenesis, and osteogenesis and induced robust bone formation, thereby significantly promoting maxillofacial regeneration. Overall, this study supported that in the stabilized microenvironment, oxidized RAM with osteoid-like stiffness offered requisite mechanical cues for osteogenesis and an appropriate degradation profile to facilitate bone formation. Combining the 3D-printed hydroxyapatite scaffold and oxidized RAM with osteoid-like stiffness may be an advantageous approach for maxillofacial regeneration.

Precision nitrogen fertilizer application depends on accurate estimation of plant nitrogen content. However, the assessment of plant nitrogen content at early growth stages of paddy rice through remote sensed images is complicated by the compound effects of backgrounds (e.g. flood water, bare soil, algae, etc.) on the band reflectance. The rapid changing of plant nitrogen content during the vegetative phase makes the development of an operational prediction model very difficult. In this study, aerial images acquired by a quadcopter unmanned aerial vehicle (UAV) equipped with a multispectral sensor were used to estimate plant nitrogen content at vegetative phase of rice crops. The experiments were conducted at the experimental farm of Taiwan Agricultural Research Institute (TARI) from 2018 to 2020. A variable, N-index (ratio between N content of plants to be evaluated and plants not receiving N fertilizers), was introduced to resolve the issues related to rapid changing of plant N content during the vegetative phase. After removing the interference on band reflectance by background from the aerial images, the most appropriate vegetation indices and period that can capture the variations of N-index of rice plants were identified. It was found that a normalized difference red edge index (NDRI) and red edge chlorophyll index (RECI) based model correlated well with the N-index values from c.a. 30 days after transplanting (DAT) to 55 DAT (i.e., the most crucial period for rice yield and grain quality). The developed model was then used to display the spatial and temporal heterogeneity in plant nitrogen status within an experimental field as an example to illustrate how to use the model. In the example, soil plant analysis development (SPAD) meter values at locations of various levels of estimated N-index were collected as surrogates of plant nitrogen content at various DATs to build relationships for converting N-index maps to SPAD maps for potential variable rate fertilizer application management.

Background/Purpose Supracrestal ridge augmentation (SRA) is a major challenge for clinicians. This study investigated the efficacy of a 3D-printed (3DP) hydroxyapatite/poly(lactic-co-glycolic acid) (HA/PLGA) scaffold as a potential biologic for SRA. Methods Scaffolds that were 5 mm in diameter and 2.5-mm thick with a 1.2-mm diameter through-and-through central hole composed of 90% HA and 10% PLGA were printed using an extrusion-based bioprinter. The HA/PLGA scaffold was fixed with a 1.2-mm titanium mini-implant on the buccal surface of rat mandible (Ti-HPS), and the outcome of SRA were compared with sites treated with a titanium mini-implant alone (control) and a titanium mini-implant covered with deproteinized bovine bone-derived matrix (Ti-DBBM) at 4 and 8 weeks by microcomputed tomography (micro-CT), back-scattered SEM, and histology assessments. Results The HA/PLGA scaffolds were 2.486 ± 0.082 mm thick with an outer diameter of 4.543 ± 0.057 mm and an inner diameter of 1.089 ± 0.045 mm, and the pore dimensions were 0.48–0.52 mm. There was significantly more mineralized tissue in the Ti-DBBM and Ti-HPS groups than in the control group at both time points. Newly formed bone (NB) was well-integrated with the DBBM and HA/PLGA scaffolds. The framework of the 3DP-HA/PLGA scaffold remained in place, and NB-implant contact (NBIC) was advanced to the middle level in the Ti-HPS group until 8 weeks, whereas dispersion of DBBM with a lower level NBIC was noted in the Ti-DBBM group at both time points. Conclusion The 3DP HA/PLGA scaffold maintains supracrestal space and demonstrates osteoconductivity to facilitate SRA.

International audience; Copper/bismuth sulfide heterojunctions boost the catalytic and photoresponsive properties engendered antibacterial activity against clinically isolated multidrug-resistant bacteria and their associated biofilms.We report a one-pot facile synthesis of highly photoresponsive bovine serum albumin (BSA) templated bismuth-copper sulfide nanocomposites (BSA-BiZ/CuxS NCs, where BiZ represents in situ formed Bi2S3 and bismuth oxysulfides (BOS)). As-formed surface vacancies and BiZ/CuxS heterojunctions impart superior catalytic, photodynamic and photothermal properties. Upon near-infrared (NIR) irradiation, the BSA-BiZ/CuxS NCs exhibit broad-spectrum antibacterial activity, not only against standard multidrug-resistant (MDR) bacterial strains but also against clinically isolated MDR bacteria and their associated biofilms. The minimum inhibitory concentration of BSA-BiZ/CuxS NCs is 14-fold lower than that of BSA-CuxS NCs because their multiple heterojunctions and vacancies facilitated an amplified phototherapeutic response. As-prepared BSA-BiZ/CuxS NCs exhibited substantial biofilm inhibition (90%) and eradication (>75%) efficiency under NIR irradiation. Furthermore, MRSA-infected diabetic mice were immensely treated with BSA-BiZ/CuxS NCs coupled with NIR irradiation by destroying the mature biofilm on the wound site, which accelerated the wound healing process via collagen synthesis and epithelialization. We demonstrate that BSA-BiZ/CuxS NCs with superior antimicrobial activity and high biocompatibility hold great potential as an effective photosensitive agent for the treatment of biofilm-associated infections.

Although Al-induced iron chlorosis has been observed in many plants, the mechanisms responsible for this phenomenon are yet to be understood. We investigated the effect of Al on iron acquisition in a Strategy II plant, wheat (Triticum aestivum L.) using both Al-tolerant (Atlas 66) and -sensitive (Scout 66) cultivars. When iron was supplied as insoluble iron, ferric hydroxide, in the culture solution, both cultivars without Al treatment grew normally, while those with 100 μM AlCl 3 developed chlorosis of the young leaves after 3 days of the treatment. A 21-h treatment with 100 μM AICl 3 in 0.5 mM CaC1 2 solution (pH 4.5) decreased the amount of 2'-deoxy-mugineic acid (DMA) secreted by Fe-deficient Atlas 66 and Scout 66 plants by 85 and 90%, respectively. The amount of DMA secreted decreased with increasing external Al concentrations. Al treatment during the biosynthesis process caused the inhibition of that of DMA within 3 h. The secretion process was also found to be inhibited by Al, resulting in the biosynthesized DMA remaining in the roots. These results demonstrate the inhibition by Al of both biosynthesis and secretion of DMA attributed to Al-induced iron chlorosis.

Background Infection control is a major determinant of guided tissue regeneration (GTR). This study aims to develop an antibiotic-loaded membrane to assist periodontal repair. Methods Poly(D,L-lactic acid) (PDLLA) nanofibers encapsulating amoxicillin (PDLLA-AMX) were fabricated using the electrospinning technique, and their structures, drug encapsulation efficiency, and release characteristics were assessed. The viability and behaviors of periodontal ligament (PDL) cells on nanofibers, and antibacterial capabilities of nanofibers were evaluated in vitro. Early therapeutic efficiency of the antibiotic-loaded membranes was investigated in rats with ligature-induced experimental periodontitis, and the outcomes were evaluated by gene expression, microcomputed tomography imaging, and histology within 7 days of membrane placement. Results AMX was successfully encapsulated in the PDLLA nanofibers and released in a sustained manner. After initial attachment was achieved, cells stretched out along with the directions of nanofibers. The viability and expression of migration-associated gene of PDL cells were significantly improved, and the growth of Streptococcus sanguinis and Porphyromonas gingivalis was significantly reduced in the PDLLA-AMX group compared with the controls. On PDLLA-AMX-treated sites, wound dehiscence and sulcular inflammation were reduced. Collagen fiber matrix deposition was accelerated with upregulated type I collagen and interleukin-1β, and downregulated matrix metalloproteinase-8, whereas periodontal bone level and the expressions of vascular endothelial growth factor and core-binding factor subunit alpha-1 were equivalent to conventional membrane treatment. Conclusions PDLLA-AMX nanofibers inhibited bacterial growth and promoted the viability and mobility of PDL cells after initial cell attachment. Membranes with PDLLA-AMX nanofibers reduced inflammation and accelerated periodontal repair at an early stage, providing good prospects for the further development of GTR membranes.

This study aimed to evaluated the potential of core-shell poly(D, l -lactide-co-glycolide)-chitosan (PLGA-chitosan) nanospheres encapsulating simvastatin (SIM) and doxycycline (DOX) for promoting periodontal and large-sized osseous defects. SIM, and/or DOX were encapsulated in PLGA-chitosan nanospheres using double emulsion technique and were delivered to sites of experimental periodontitis and large-sized mandibular osseous defects of rats for 1–4 weeks. The resultant nanospheres were ~ 200 nm diameter with distinct core-shell structure and released SIM and DOX sustainably for 28 days. DOX and SIM-DOX nanospheres significantly inhibited P. gingivalis and S. sanguinis. In experimental periodontitis sites, SIM-DOX nanospheres significantly down-regulated IL-1b and MMP-8 and significantly reduced bone loss. In mandibular osseous defects, VEGF was up-regulated, and osteogenesis was significantly augmented with SIM nanospheres treatment. In conclusion, core-shell PLGA-chitosan nanospheres released SIM and DOX sustainably. SIM-DOX and SIM nanospheres could be considered to promote the repair of infected periodontal sites and non-infected osseous defects respectively.

Antibiotics used as growth promoters in livestock and animal husbandry can be detected in animal-derived food. Epidemiological studies have implicated that exposure to these antibiotic residues in food may be associated to childhood obesity. Herein, the effect of exposure to residual dose of tylosin—an antibiotic growth promoter—on host metabolism and gut microbiota was explored in vivo. Theoretical maximal daily intake (TMDI) doses of tylosin were found to facilitate high-fat diet-induced obesity, induce insulin resistance, and perturb the composition of gut microbiota in mice. The obesity-related phenotypes were transferrable to germ-free recipient mice, indicating that the effects of TMDI dose of tylosin on obesity and insulin resistance occurred mainly via alteration of the gut microbiota. Tylosin TMDI exposure restricted to early life, which is the critical period of gut microbiota development, altered the abundance of specific bacteria related to host metabolic homeostasis later in life. Moreover, early-life exposure to tylosin TMDI was sufficient to modify the ratio of primary to secondary bile acids, thereby inducing lasting metabolic consequences via the downstream FGF15 signaling pathway. Altogether, these findings demonstrate that exposure to very low dose of antibiotic residues, whether continuously or in early life, can exert long-lasting effects on host metabolism by altering gut microbiota and its metabolites. Importance Evidence has indicated that chronic exposure to antibiotic residues in food could contribute to obesity. However, few studies have investigated the effect of chronic exposure to very low-dose antibiotic residue in food (~1000-fold lower than the therapeutic dose) on gut microbiota and host metabolism. Our study demonstrates that even with limited exposure in early life, a residual dose of tylosin causes lasting metabolic disturbances through altering gut microbiota and its metabolites. Our findings reveal that the gut microbiota is susceptible to previously ignored environmental factors.

agriculture practices adopt homogenization-farming processes to enhance product characteristics, with lower costs, standardization, mass production, and production efficiency. (2) Problem: conventional agriculture practices eliminate products when these products are slightly different from the expected status in each phase of the lifecycle due to the changing natural environment and climate. However, this elimination of products can be avoided when they receive customized care to the expected developing path via a universal prediction model, for the quantitative description of biomass changing with time and the environment, and the corresponding automatic environmental controls. (3) Methods: in this study, we built a prediction model to quantitatively predict the hatching rate of each egg by observing the biomass development path along the waterfowl-like production lifecycle and the corresponding environment settings. (4) Results: two experiments using black Muscovy duck hatching as a case study were executed. The first experiment involved finding out the key characteristics, out of 25 characteristics, and building a prediction model to quantitatively predict the survivability of the black Muscovy duck egg. The second experiment was adopted to validate the effectiveness of our prediction mode, the hatching rate rose from 47% in the first experiment to 62% in the second experiment without any human interference from experienced farmers. (5) Contributions: this research builds on an AI-based precision agriculture system prototype as the reference for waterfowl research. The results show that our proposed model is capable of decreasing the training costs and enhancing the product qualification rate for individual agricultural products.

Proazaphosphatranes are intriguing ligand architectures comprising a bicyclic cage of flexible nature. They can undergo structural deformations due to transannulation while displaying modular electronic and steric properties. Herein, we report the synthesis and coordination chemistry of rhodium(I) complexes bearing a tris(isopropyl)-azaphosphatrane (TiPrAP) ligand. The molecular structure of the primary complex (1) revealed the insertion of the metal center into a P–N bond of the ligand. The addition of a Lewis acid, i.e., lithium chloride, promoted the dynamic behavior of the complex in the solution, which was studied by state-of-the-art NMR spectroscopy. Substituting the cyclooctadiene ligand at the metal center with triphenylphosphine or 2-pyridyldiphenylphosphine unveiled the adaptive nature of the TiPrAP backbone capable of switching its axial nitrogen from interacting with the phosphorus atom to coordinate the rhodium center. This led the entire ligand edifice to change its binding to rhodium from a bidentate to tridentate coordination. Altogether, our study shows that introducing a TiPrAP ligand allows for unique molecular control of the immediate environment of the metal center, opening perspectives in controlled bond activation and catalysis.

Al-Si alloys exhibit promising wear resistance, thus being mainly employed to weld Al alloy parts and processed into components of equipment. During the new continuous casting direct rolling (CCDR) process, the raw material gradually cools and solidifies, simultaneously plastically deformed. Hence, the materials manufactured through the CCDR process presented an unparalleled microstructure. The experimental results indicated that the strength of the CCDR Al-Si alloy can be increased through cold rolling. A two-stage heat treatment (solid solution and aging treatment) was introduced to improve the ductility and satisfy the industrial application. Furthermore, the erosion wear characteristics and fracture mechanism of the CCDR Al-Si alloy dominated by the ductility were confirmed. Both cold rolling specimens (FR) and those with heat treatment (FRH) showed greater wear resistance than as-manufactured (F). The FR specimens exhibited greater wear resistance owing to a higher Al matrix strength at a lower impact angle, on the other hand, at a higher impact angle, the FRH specimens with a softer Al matrix presented better wear resistance due to the formation of a lip structure to reduce material removal. The TEM results confirmed that the nanoscale grains formation was induced in the erosion-affected region and affected the Si concentration. Conclusively, the heat-treated CCDR Al-Si alloy possessed excellent erosion resistance and workability, which can serve as a reference processed as wear-resistant mechanical parts.

IL-20 is a proinflammatory cytokine of the IL-10 family and involved in several diseases. However, the regulatory role of IL-20 in obesity is not well understood. We explored the function of IL-20 in the pathogenesis of obesity-induced insulin resistance by ELISA, western blotting, and flow cytometry. The therapeutic potential of IL-20 monoclonal antibody 7E for ameliorating diet-induced obesity was analyzed in murine models. Higher serum IL-20 levels were detected in obese patients. It was upregulated in leptin-deficient (ob/ob), leptin-resistant (db/db), and high-fat diet (HFD)-induced murine obesity models. In vitro, IL-20 regulated the adipocyte differentiation and the polarization of bone marrow-derived macrophages into proinflammatory M1 type. It also caused inflammation and macrophage retention in adipose tissues by upregulating TNF-α, monocyte chemotactic protein-1 (MCP-1), netrin-1, and unc5b (netrin receptor) expression in macrophages, and netrin-1, leptin, and MCP-1 in adipocytes. IL-20 promoted insulin resistance by inhibiting glucose uptake in mature adipocytes through the SOCS-3 pathway. In HFD-induced obesity in mice, 7E treatment reduced body weight, and improved glucose tolerance and insulin sensitivity; it also reduced local inflammation and the number of M1-like macrophages in adipose tissues. We have identified a critical role of IL-20 in obesity-induced inflammation and insulin resistance, and we conclude that IL-20 may be a novel target for treating obesity and insulin resistance in patients with metabolic disorders.

SummaryMechanical stimuli on the skin of C. elegans are detected by the dendritic arbors of PVD nociceptive neurons, which provide uniform sensory coverage outside the head region across the entire animal. Through genetic screens, we isolate three mutants that display profound dendrite self-avoidance defects in PVD neurons. Studying dendrite self-avoidance in C. elegans is likely to provide new mechanistic insight into the process as the well-known self-avoidance molecule Dscam is absent from the C. elegans genome. Through whole genome sequencing, we identify the responsible mutations in the kpc-1 gene. Compared to wild-type animals, a strong kpc-1 mutant allele exhibits secondary dendrite branching defects whereas a weak kpc-1 mutant allele displays tertiary dendrite self-avoidance defects. Here, we show that the kpc-1 3’UTR is required for kpc-1’s functions in both dendrite branching and dendrite self-avoidance. The kpc-1 3’UTR facilitates kpc-1 RNA localization to branching points and contact points between sibling dendrites. Using fluorescence recovery after photoconversion, we show that the kpc-1 3’UTR promotes local protein synthesis in the distal segment of PVD dendrites. We identify an important secondary structural motif in the kpc-1 3’UTR required for tertiary dendrite self-avoidance. We demonstrate that over-expression of kpc-1 leads to greater self-avoidance without limiting initial dendrite outgrowth, supporting a direct role of kpc-1 in self-avoidance. Animals with dma-1 receptor over-expression display similar secondary dendrite branching and tertiary dendrite self-avoidance defects that are suppressed with kpc-1 over-expression, which suggests that DMA-1 is a potential KPC-1 target that is down-regulated by KPC-1. Our results support a model where KPC-1 proteins are synthesized at branching points and contact points between neighboring dendrites to locally down-regulate DMA-1 receptors to promote dendrite branching and self-avoidance. A recently reported Schizophrenia-associated genetic variant in the 3’UTR of the human furin gene, a homolog of kpc-1, highlights the important role of the kpc-1 (furin) 3’UTR in neuronal development, which is further demonstrated by this mechanistic study.

Cardiovascular disease (CVD) is strongly associated with the gut microbiota and its metabolites, including trimethylamine-N-oxide (TMAO), formed from metaorganismal metabolism of ʟ-carnitine. Raw garlic juice, with allicin as its primary compound, exhibits considerable effects on the gut microbiota. This study validated the benefits of raw garlic juice against CVD risk via modulation of the gut microbiota and its metabolites. Allicin supplementation significantly decreased serum TMAO in ʟ-carnitine-fed C57BL/6 J mice, reduced aortic lesions, and altered the fecal microbiota in carnitine-induced, atherosclerosis-prone, apolipoprotein E-deficient (ApoE−/−) mice. In human subjects exhibiting high-TMAO production, raw garlic juice intake for a week reduced TMAO formation, improved gut microbial diversity, and increased the relative abundances of beneficial bacteria. In in vitro and ex vivo studies, raw garlic juice and allicin inhibited γ-butyrobetaine (γBB) and trimethylamine production by the gut microbiota. Thus, raw garlic juice and allicin can potentially prevent cardiovascular disease by decreasing TMAO production via gut microbiota modulation.

KIT is a tyrosine kinase receptor involved in carcinogenesis. Two alternatively spliced transcripts, differed from presence of four amino acids (GNSK) at exon 9 of c-kit, were identified in various human tumours and canine hemangiosarcoma (HSA). The biological function and clinical implications of these isoforms have not yet been elucidated in canine tumours. The current study aimed to validate the expression profile and ultimately to evaluate the correlation of c-kit isoform levels with clinicopathological factors of canine mammary tumours (CMTs). In total, the expression profiles of c-kit isoforms in 196 samples obtained from normal mammary glands (NMGs) of healthy controls and dogs with CMTs, benign and malignant CMTs, and HSAs were determined by polymerase chain reaction (PCR) and quantified via real-time PCR. Overall, the expression levels of the two isoforms were equivalent in NMGs, whereas the GNSK- /GNSK+ ratio sharply increased to 7.44- and 8.33-fold, indicating abundant GNSK- isoforms in benign and malignant CMTs, respectively. However, a significant decrease in GNSK- expression was detected in dogs with high-grade malignant CMTs (mCMTs) and with metastatic CMTs compared with expression in those with a lower grade and non-metastatic CMTs. In addition, the median survival time was shorter in mCMT canines with a lower GNSK- /GNSK+ ratio than that in mCMT canines with a higher ratio (899 days vs 1534 days). In conclusion, two c-kit isoforms are ubiquitously expressed with great variability in HSAs and CMTs with both benign and malignant status. The GNSK- /GNSK+ ratio could serve as a prognostic indicator for dogs with mCMTs.

This study aimed to develop wearable devices of textile-based triboelectric nanogenerators (TENGs) integrated with plastic metal electrodes. The plastic metal electrodes were developed using Ga-In liquid alloy with glaze powders as the contact electrodes of the textile-based TENGs. Moreover, nylon and polyester textiles with different microstructures/nanostructures were selected as frictional electrodes in TENGs to achieve high flexibility, stability, and electric conductivity. The experimental results indicated that the maximum output voltage and current of the textile-based TENGs were 30.96 V and 3.07 μA, respectively, when the TENG comprised a nylon layer with embroidered square array patterns and a polyester layer with polyvinylidene fluoride nanofibers. Furthermore, these TENGs could generate a maximum output power of 13.97 μW when the external load resistance was 10 MΩ. After a continuous 7200 cycle operation with a reciprocating linear motion platform having a pneumatic cylinder, the textile-based TENG exhibited excellent stability and durability. The fabricated TENGs integrated in a commercial coat, shoe, kneecap, and wristband achieved biomechanical energy conversion functions with high electrical performance for practical applications of self-powered devices.

A T-shaped Ni(II) complex [Tol,PhDHPy]Ni has been prepared and characterized. EPR spectra and DFT calculations of this complex suggest that the electronic structure is best described as a high-spin Ni(II) center antiferromagnetically coupled with a ligand-based radical. This complex reacts with water at room temperature to generate the dimeric complex [Tol,PhDHPy]Ni(μ-OH)Ni[Tol,PhDHPyH] which has been thoroughly characterized by SXRD, NMR, IR and deuterium-labeling experiments. Addition of simple ligands such as phosphines or pyridine displaces water and demonstrates the reversibility of water activation in this system. The water activation step has been examined by kinetic studies and DFT calculations which suggest an unusual homolytic reaction via a bimetallic mechanism. The ΔH‡, ΔS‡ and KIE (kH/kD) of the reaction are 5.5 kcal mol−1, −23.8 cal mol−1 K−1, and 2.4(1), respectively. In addition to the reversibility of water addition, this system is capable of activating water towards net O-atom transfer to substrates such as aromatic C–H bonds and phosphines. This reactivity is facilitated by the ability of the dihydrazonopyrrole ligand to accept H-atoms and illustrates the utility of metal ligand cooperation in activating O–H bonds with high bond dissociation energies.

New starburst small molecules bearing carbazole end-groups are step-economically synthesized in good isolated yields (70–84%) by sequential C–H activation/arylation reactions. Perovskite solar cells employing these molecules (YC05–08) as hole-transporting materials (HTMs) display a promising power conversion efficiency of up to 17.4%.

Metastases cause 90% of human cancer deaths. The metastatic cascade involves local invasion, intravasation, extravasation, metastatic site colonization, and proliferation. Although individual mediators of these processes have been investigated, interactions between these mediators remain less well defined. We previously identified a complex between receptor tyrosine kinase c-Met and β1 integrin in metastases. Using cell culture and in vivo assays, we found that c-Met/β1 complex induction promoted intravasation and vessel wall adhesion in triple-negative breast cancer cells, but did not increase extravasation. These effects may have been driven by the ability of the c-Met/β1 complex to increase mesenchymal and stem cell characteristics. Multiplex transcriptomic analysis revealed upregulated Wnt and hedgehog pathways after c-Met/β1 complex induction. A β1 integrin point mutation that prevented binding to c-Met reduced intravasation. OS2966, a therapeutic antibody disrupting c-Met/β1 binding, decreased breast cancer cell invasion and mesenchymal gene expression. Bone-seeking breast cancer cells exhibited higher levels of c-Met/β1 complex than parental controls and preferentially adhered to tissue-specific matrix. Patient bone metastases demonstrated higher c-Met/β1 complex than brain metastases. Thus, the c-Met/β1 complex drove intravasation of triple-negative breast cancer cells and preferential affinity for bone-specific matrix. Pharmacological targeting of the complex may have prevented metastases, particularly osseous metastases.

Thymidine kinase 2 (TK2) deficiency is an extremely rare disease with a variable onset age and symptoms.1, 2 Proximal muscle weakness, respiratory failure, facial weakness, and ptosis are the main symptoms. Deoxycytidine (dC) and deoxythymidine (dT) supplements might be a potential treatment after a timely diagnosis.3 Here, we report a patient with adult-onset ptosis and proximal muscle weakness who was finally diagnosed as having TK2-related myopathy.

Heterogeneous catalysis based on air-stable lanthanide complexes is relatively rare, especially for electrochemical water oxidation and reduction. Therefore, it is highly desired to investigate the synergy caused by cocatalysts on the lanthanide complex family for heterogeneous catalysis because of their structural diversity, air/moisture insensitivity, and easy preparation under an air atmosphere. Two mononuclear and three dinuclear dysprosium complexes containing a series of Schiff-base ligands have been demonstrated as robust electrocatalysts for triggering heterogeneous water oxidation in alkaline solution, in which the complex [Dy2(hmb)2(OAc)4]·MeCN(3) was revealed to have the best activity toward heterogeneous water oxidation among all five complexes in the present study. The molecular activation of dysprosium complexes has also been investigated with a series of N-containing heterocyclic additives [i.e., 4-(dimethylamino)pyridine (DMAP), bis(triphenylphosphine)iminium chloride ([PPN]Cl), indole, and quinoline]. In particular, the corresponding overpotential was effectively enhanced by 211 mV (at a current density of 10 mA cm-2) with the assistance of DMAP. On the basis of electrochemical and ex situ/in situ spectroscopic investigations, the best catalyst, DMAP-complex 3 on a carbon paper electrode, was confirmed with well-maintained molecular identity during heterogeneous water oxidation free of forming any dysprosium oxide and/or undesired products.

Background Bismuth oxychloride produced by interaction of bismuth compounds with gastric acid is believed to damage Helicobacter pylori. The effect of bismuth salts on H. pylori in the presence of strong acid suppression is unknown. This randomized trial aimed to determine effects of bismuth subcitrate on H. pylori with and without acid suppression. Methods H. pylori -positive participants were allocated (1:1:1) to receive (a) no treatment (control), (b) colloidal bismuth subcitrate (CBS, 125 mg/tab), or (c) CBS plus high-dose proton-pump inhibitor (PPI), esomeprazole 40 mg q.i.d. for 3 days. In the treatment groups, CBS was given: 1 dose, 1 hour before endoscopy, 1 dose, 4 hours before endoscopy, or q.i.d. 24 hours before endoscopy. The study end-points were evaluated using transmission electron microscopy to observe the morphological changes of H. pylori in antral and corpus biopsies. Results Twenty-seven H. pylori carriers were enrolled in this trial with qualitative end-points. In the no treatment group, active budding and replication of H. pylori were observed. In the CBS group, cellular swelling, vacuolization, structural degradation, and cell wall eruption of H. pylori were observed, with no apparent association with when the CBS was given. Among those receiving high-dose PPI-plus CBS or CBS only, there were no differences in number of H. pylori present or severity of bacterial damage whether CBS was given 1, 4, or 24 hours before endoscopy. Conclusions Based on direct morphological evaluation, the toxic effect of CBS treatment on H. pylori was demonstrated independent of acid suppression with PPI.

Biomacromolecules are highly promising therapeutic modalities to treat various diseases. However, they suffer from poor cellular membrane permeability, limiting their access to intracellular targets. Strategies to overcome this challenge often employ nanoscale carriers that can get trapped in endosomal compartments. Here we report conjugated peptides that form pH- and redox-responsive coacervate microdroplets by liquid-liquid phase separation that readily cross the cell membrane. A wide range of macromolecules can be quickly recruited within the microdroplets, including small peptides, enzymes as large as 430 kDa and messenger RNAs (mRNAs). The therapeutic-loaded coacervates bypass classical endocytic pathways to enter the cytosol, where they undergo glutathione-mediated release of payload, the bioactivity of which is retained in the cell, while mRNAs exhibit a high transfection efficiency. These peptide coacervates represent a promising platform for the intracellular delivery of a large palette of macromolecular therapeutics that have potential for treating various pathologies (for example, cancers and metabolic diseases) or as carriers for mRNA-based vaccines. Ministry of Education (MOE) This research was funded by the Singapore Ministry of Education (MOE) through an Academic Research Fund (AcRF) Tier 3 grant (grant no. MOE 2019-T3-1-012). S.C.C. acknowledges support from the Merck Research Laboratories (MRL) Postdoctoral Research Program.

Partially acetylated chito-oligosaccharides (paCOSs) are bioactive compounds with potential medical applications. Their biological activities are largely dependent on their structural properties, in particular their degree of polymerization (DP) and the position of the acetyl groups along the glycan chain. The production of structurally defined paCOSs in a purified form is highly desirable to better understand the structure/bioactivity relationship of these oligosaccharides. Here, we describe a newly discovered chitinase from Paenibacillus pabuli (PpChi) and demonstrate by mass spectrometry that it essentially produces paCOSs with a DP of three and four that carry a single N-acetylation at their reducing end. We propose that this specific composition of glucosamine (GlcN) and N-acetylglucosamine (GlcNAc) residues, as in GlcN(n)GlcNAc1, is due to a subsite specificity toward GlcN residues at the −2, −3, and −4 positions of the partially acetylated chitosan substrates. In addition, the enzyme is stable, as evidenced by its long shelf life, and active over a large temperature range, which is of high interest for potential use in industrial processes. It exhibits a kcatof 67.2 s–1 on partially acetylated chitosan substrates. When PpChi was used in combination with a recently discovered fungal auxilary activity (AA11) oxidase, a sixfold increase in the release of oligosaccharides from the lobster shell was measured. PpChi represents an attractive biocatalyst for the green production of highly valuable paCOSs with a well-defined structure and the expansion of the relatively small library of chito-oligosaccharides currently available. QC 20210322

Porcine epidemic diarrhea virus (PEDV) causes severe diarrhea and a high rate of mortality in suckling pigs. The epidemic of PEDV that occurred after 2013 was caused by non-insertion and deletion of S gene (S-INDEL) PEDV strains. During this epidemic, a variant of the non-S-INDEL PEDV strain with a large deletion of 205 amino acids on the spike gene (5-17-V) was also found to co-exist with a non-S-INDEL PEDV without deletion (5-17-O). Herein, we describe the differences in the complete genome, distribution, virulence, and antigenicity between strain 5-17-O and variant strain 5-17-V. The deletion of 205 amino acids was primarily located in the S1O domain and was associated with milder clinical signs and lower mortality in suckling pigs than those of the 5-17-O strain. The 5-17-V strain-induced antibody did not completely cross-neutralize the 5-17-O strain. In conclusion, the deletion in the S1 region reduces the virulence of PEDV and influences the virus-neutralizing activities of the antibody it induces.

Globally, soils store two to three times as much carbon as currently resides in the atmosphere, and it is critical to understand how soil greenhouse gas (GHG) emissions and uptake will respond to ongoing climate change. In particular, the soil‐to‐atmosphere CO2 flux, commonly though imprecisely termed soil respiration (R S), is one of the largest carbon fluxes in the Earth system. An increasing number of high‐frequency R S measurements (typically, from an automated system with hourly sampling) have been made over the last two decades; an increasing number of methane measurements are being made with such systems as well. Such high frequency data are an invaluable resource for understanding GHG fluxes, but lack a central database or repository. Here we describe the lightweight, open‐source COSORE (COntinuous SOil REspiration) database and software, that focuses on automated, continuous and long‐term GHG flux datasets, and is intended to serve as a community resource for earth sciences, climate change syntheses and model evaluation. Contributed datasets are mapped to a single, consistent standard, with metadata on contributors, geographic location, measurement conditions and ancillary data. The design emphasizes the importance of reproducibility, scientific transparency and open access to data. While being oriented towards continuously measured R S, the database design accommodates other soil‐atmosphere measurements (e.g. ecosystem respiration, chamber‐measured net ecosystem exchange, methane fluxes) as well as experimental treatments (heterotrophic only, etc.). We give brief examples of the types of analyses possible using this new community resource and describe its accompanying R software package., Here we describe the lightweight, open source COSORE (COntinuous SOil REspiration) database and software. COSORE focuses on automated, continuous and long‐term greenhouse gas flux datasets, and is intended to serve as a community resource for earth sciences, climate change syntheses and model evaluation.

There are few materials that are broadly used for fabricating optical metasurfaces for visible light applications. Gallium phosphide (GaP) is a material that, due to its optical properties, has the potential to become a primary choice but due to the difficulties in fabrication, GaP thin films deposited on transparent substrates have never been exploited. In this article we report the design, fabrication, and characterization of three different amorphous GaP metasurfaces obtained through sputtering. Although the material properties can be further optimized, our results show the potential of this material for visible applications making it a viable alternative in the material selection for optical metasurfaces.

This research aimed to develop a direct-write near-field electrospinning system (DW-NFES) with three-axis positioning of controllable speed, torque and position to produce sizable and high-quality piezoelectric fibers for sensing purposes. Sensor devices with high electrical response signals were developed and tested. To achieve DW-NFES purpose, a servo motor controller was designed to develop a high response rate, accurate positioning, and stable mobile device through the calculation of bandwidth and system time delay. With this retooled system of DW-NFES, controllable and uniform size fibers in terms of diameters, stretching force, and interspaces can be obtained. Sensor devices can be made selectively without a complicated lithography process. The characteristics of this DW-NFES platform were featured by high response rate, accurate positioning, and stable movement to make fibers with high piezoelectric property. In this study, polyvinylidene fluoride (PVDF) was used to explore and enhance their sensing quality through the platform. The parametric study of the process factors on piezoelectric sensing signals mainly included the concentration of electrospinning PVDF solution, high voltage electric field, and collection speed. Finally, the surface morphology and piezoelectric properties of the as-electrospun PVDF fibers were examined by scanning electron microscopy (SEM) and characterized by electrical response measurement techniques. The results showed that the fiber spinning speed of the DW-NFES system could be increased to ~125 from ~20 mm/s and the accuracy precision was improved to ~1 from ~50 &mu, m, compared to conventional step motor system. The fiber diameter reached ~10 &mu, m, and the electrospinning pitch reached to as small as ~10 &mu, m. The piezoelectric output voltage of the electrospun fibers was increased ~28.6% from ~97.2 to ~125 mV, the current was increased ~27.6% from ~163 to ~208 nA, suggesting that the piezoelectric signals can be enhanced significantly by using this retooled system. Finally, an external control module (Arduino-MAGE) was introduced to control the PVDF piezoelectric fiber sensors integrated as a sensing array. The behavior of long-term sedentary patients can be successfully detected by this module system to prevent the patients from the bedsores.

Formation of solid-phase protein aggregates in mitochondria is associated with mitochondrial lipid metabolism., Proteostasis declines with age, characterized by the accumulation of unfolded or damaged proteins. Recent studies suggest that proteins constituting pathological inclusions in neurodegenerative diseases also enter and accumulate in mitochondria. How unfolded proteins are managed within mitochondria remains unclear. Here, we found that excessive unfolded proteins in the mitochondrial matrix of yeast cells are consolidated into solid-phase inclusions, which we term deposits of unfolded mitochondrial proteins (DUMP). Formation of DUMP occurs in mitochondria near endoplasmic reticulum–mitochondria contact sites and is regulated by mitochondrial proteins controlling the production of cytidine 5′-diphosphate–diacylglycerol. DUMP formation is age dependent but accelerated by exogenous unfolded proteins. Many enzymes of the tricarboxylic acid cycle were enriched in DUMP. During yeast cell division, DUMP formation is necessary for asymmetric inheritance of damaged mitochondrial proteins between mother and daughter cells. We provide evidence that DUMP-like structures may be induced by excessive unfolded proteins in human cells.

The large linear dynamic range tunnel magnetoresistance (TMR) sensors were designed and successfully fabricated in 8 inch Silicon process line for current / magnetic sensing applications. In this paper, the TMR sensors show their performances strongly depend on wafer etching conditions and aspect ratios (ARs) of magnetic tunnel junctions (MTJs). During the fine-tuning of etching conditions and AR of MTJs, the packaged TMR sensors have large linear dynamic range (> 200 Oe) and suitable characteristics to apply in current measurement system.

[Image: see text] We describe a cysteine-rich, membrane-penetrating, joint-targeting, and remarkably stable peptide, EgK5, that modulates voltage-gated K(V)1.3 potassium channels in T lymphocytes by a distinctive mechanism. EgK5 enters plasma membranes and binds to K(V)1.3, causing current run-down by a phosphatidylinositol 4,5-bisphosphate-dependent mechanism. EgK5 exhibits selectivity for K(V)1.3 over other channels, receptors, transporters, and enzymes. EgK5 suppresses antigen-triggered proliferation of effector memory T cells, a subset enriched among pathogenic autoreactive T cells in autoimmune disease. PET-CT imaging with (18)F-labeled EgK5 shows accumulation of the peptide in large and small joints of rodents. In keeping with its arthrotropism, EgK5 treats disease in a rat model of rheumatoid arthritis. It was also effective in treating disease in a rat model of atopic dermatitis. No signs of toxicity are observed at 10–100 times the in vivo dose. EgK5 shows promise for clinical development as a therapeutic for autoimmune diseases.

The capability of gut microbiota in degrading foods and drugs administered orally can result in diversified efficacies and toxicity interpersonally and cause significant impact on human health. Production of atherogenic trimethylamine N-oxide (TMAO) from carnitine is a gut microbiota-directed pathway and varies widely among individuals. Here, we demonstrated a personalized TMAO formation and carnitine bioavailability from carnitine supplements by differentiating individual TMAO productivities with a recently developed oral carnitine challenge test (OCCT). By exploring gut microbiome in subjects characterized by TMAO producer phenotypes, we identified 39 operational taxonomy units that were highly correlated to TMAO productivity, including Emergencia timonensis, which has been recently discovered to convert γ-butyrobetaine to TMA in vitro. A microbiome-based random forest classifier was therefore constructed to predict the TMAO producer phenotype (AUROC = 0.81) which was then validated with an external cohort (AUROC = 0.80). A novel bacterium called Ihubacter massiliensis was also discovered to be a key microbe for TMA/TMAO production by using an OCCT-based humanized gnotobiotic mice model. Simply combining the presence of E. timonensis and I. massiliensis could account for 43% of high TMAO producers with 97% specificity. Collectively, this human gut microbiota phenotype-directed approach offers potential for developing precision medicine and provides insights into translational research.

Background Goji (Lycium) is a popular traditional health food, and its fruit and root extracts have been found to possess antioxidant, anti-inflammatory, and hypocholesterolemia-inducing abilities. Goji leaves also contain high amounts of phenolic compounds, similar to its fruit, and their extracts also exhibit several pharmaceutical effects. The induction of galls on Goji leaves reduces their photosynthetic ability and fruit yield, which raise their farming costs, thereby leading to economic loss. However, the defense mechanisms induced by infection may elevate the secondary metabolite content of the leaves, which might provide more nutritive compounds. Method Content of chlorophyll, carotenoids, polyphenols, and flavonoids in the extracts of normal and infected Goji leaves (L. chinense) were analyzed. The relative content of chlorogenic acid and rutin, two major phenolic compounds in Goji leaves, were determined by LC-MS/MS. Antioxidant activity was presented by demonstrating the DPPH scavenging percentage. The extract of Goji fruit (L. barbarum) was also analyzed to show a comparative result. Results In this study, we found that in infected Goji leaves, the polyphenol content was significantly increased. The level of chlorogenic acid was increased by 36% in galled leaves. The content of rutin in galled leaves was also elevated. Testing the antioxidant activities also showed that the extracts of galled leaves have higher DPPH scavenging abilities. Conclusions Our results demonstrated that galled Goji leaves have higher functional value, and may have potential as being consumed as health food.

Djulis (Chenopodium formosanum) is a yearly, fast-growing, under-utilized pseudo-cereal with a high proportion of biomass content. We used the hulls, which are usually removed from djulis as crop residue, to evaluate the free-radical scavenging and antioxidant capacity of djulis. We studied the antioxidant capacity of ethanol- and water-extracted hulls and roots by using various in vitro methods. Ascorbic acid was the reference sample. The extract samples were used at 200, 400, 600, 800, and 1000 &micro, g/mL. Total sugar content, total phenolic content, and total flavonoid content were assessed. Antioxidant activity was assessed by using the Trolox equivalent antioxidant capacity, ferric reducing antioxidant power, cupric ion reducing antioxidant capacity, 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity, and N, N-dimethyl-&rho, phenylenediamine. Ethanol- and water-extracted red djulis hulls showed high amounts of total sugar, total phenolic content, total flavonoid content, and antioxidant capacity. Moreover, ethanol- and water-extracted red djulis roots showed moderate antioxidant capacity. However, ethanol- and water-extracted yellow djulis hulls showed limited antioxidant activities. Utilization of the biomass of djulis hulls and roots as natural antioxidant resources may be environmentally friendly and foreseeable.

This study investigates the effects of three medicinal herbal extracts, namely Bidens pilosa (BPE), Lonicera japonica (LJE), and Cyathula officinalis (COE), on nonspecific immune parameters of cobia (Rachycentron canadum) in vitro and in vivo. During in vitro tests, BPE treatment increased reactive oxygen species (ROS) production in a dose-dependent manner in primary head kidney leukocytes. Similarly, ROS production rates were enhanced by LJE (50 and 100 mg/ml) and COE (100 mg/ml). This suggests that these three herbal extracts possess immunostimulating properties. We then conducted two feeding trials to examine the effects of these three herbal extracts on growth and innate immune parameters of cobia, and sought an optimal dietary supplementation proportion required for activating the non-specific immune responses. In the first trial, we supplemented the diet with 1, 5, or 10% of the individual extracts. After a ten-week feeding trial, no negative impacts on weight gain, feed conversion rate, and survival rate were observed in fish offered experimental diets. Further, ROS production, phagocytic capacity of the head kidney leukocytes, and serum lysozyme activity were enhanced by differing degrees in fish fed the herbal extracts compared to fish in the control group. A similar albumin/globulin ratio was seen between each experimental group and the control group regardless of the type and dose of herbal extract used, indicating these medicinal herbal extracts are safe for cobia. We then performed a 30-day feeding trial with lower extract concentrations (1, 3, and 5% of the diet) to identify dose responses in cobia at various time points so that we could establish a cost-effective manner of administering the three extracts for cobia. All BPE fed fish had higher ROS production compared to the control group, while phagocytosis rate and index were simultaneously raised in only the BPE30 group (3% BPE). Immune parameters such as ROS production, phagocytic rate, and serum lysozyme activity were triggered when fish received 30 g LJE per kg of feed. However, ROS production only increased in the LJE10 group (1% LJE) on day 30 and was not enhanced in the LJE50 group (5% LJE). Additionally, although the phagocytic rate and phagocytic index were induced in the LJE50 group, serum lysozyme activity was not elevated in this group (LJE50) at any time point examined. ROS production was greatly improved in all COE fed groups, but only the COE30 group (3% COE) showed prolonged enhanced phagocytic rate over the 30-day feeding trial.

A series of tri-tin complexes (LPhSn)3X with triple-decker structures (LPh = 2,5-di(o-pyridyl)-3,4-diphenylpyrrolate; X = Cl, AlCl4, OTf, and PF6) was synthesized by reducing LPhSnCl with LiBsBu3H and subsequent reactions. Structural characterization of (LPhSn)3Cl revealed a Sn-Sn-Sn core, and DFT calculations suggest that its HOMO is primarily σ-bonding along the tri-tin framework. (LPhSn)3Cl reacts with W(CO)5THF to afford (LPhSn)2(W(CO)5)2 and LPhSnCl, implying that (LPhSn)3Cl may exhibit dynamic behavior in solution.

Upregulation of ABCB1/MDR1 (P-gp) and BIRC5/Survivin promotes multidrug resistance in a variety of human cancers. LCL161 is an anti-cancer DIABLO/SMAC mimetic currently being tested in patients with solid tumors, but the molecular mechanism of action of LCL161 in cancer cells is still incompletely understood. It is still unclear whether LCL161 is therapeutically applicable for patients with ABCB1-overexpressing multidrug resistant tumors. In this study, we found that the potency of LCL161 is not affected by the expression of ABCB1 in KB-TAX50, KB-VIN10, and NTU0.017 cancer cells. Besides, LCL161 is equally potent towards the parental MCF7 breast cancer cells and its BIRC5 overexpressing, hormone therapy resistance subline MCF7-TamC3 in vitro. Mechanistically, we found that LCL161 directly modulates the ABCB1-ATPase activity and inhibits ABCB1 multi-drug efflux activity at low cytotoxic concentrations (i.e. 0.5xIC50 or less). Further analysis revealed that LCL161 also decreases intracellular ATP levels in part through BIRC5 downregulation. Therapeutically, co-treatment with LCL161 at low cytotoxic concentrations restored the sensitivity to the known ABCB1 substrate, paclitaxel, in ABCB1-expressing cancer cells and increased the sensitivity to tamoxifen in MCF7-TamC3 cells. In conclusion, LCL161 has the potential for use in the management of cancer patients with ABCB1 and BIRC5-related drug resistance. The findings of our study provide important information to physicians for designing a more "patient-specific" LCL161 clinical trial program in the future.

Background The influenza virus is a highly infectious disease, with a notably rapid transmission rate. Autophagy is triggered by viral infection and is a survival mechanism exerted to maintain cellular homeostasis. Catechin is a representative phenolic acid which exerts anti-inflammatory responses against influenza A virus infection. The aim of this study is to explore the anti-H1N1 influenza virus effects by catechin associated with the restoration of autophagy. Methods XTT assay was used to detect cellular viability. The inhibitory effects on the H1N1 influenza virus were assessed by hemagglutination assay, neuraminidase activity, and quantitative reverse transcription-polymerase chain reaction (qRT-PCR). The protein levels of H1N1 influenza virulence and autophagic markers were detected by Western blot. Results We herein demonstrated that catechin had no cytotoxic effect on both infected and noninfected A549 cells and exerted protective effects on infected A549 cells. The results of the hemagglutination assay, neuraminidase activity, and qRT-PCR to examine viral load demonstrated that catechin effectively inhibited the replication of the H1N1 influenza virus. The virulent M2 protein and viral nucleoprotein were also inhibited after treatment with catechin. As for the autophagic markers, the LC3B protein was notably decreased by catechin in a dose-dependent manner, while the amount of autophagic vacuoles in H1N1 influenza virus-infected cells also decreased after catechin treatment in a dose-dependent manner. Conclusion Collectively, the autophagy activated by the H1N1 influenza virus could be reversed after catechin treatment. This study indicates that catechin effectively inhibits H1N1 viral proliferation and thus may be applied as an adjuvant in future clinical application.

Targeted degradation approaches such as proteolysis targeting chimeras (PROTACs) offer new ways to address disease through tackling challenging targets and with greater potency, efficacy, and specificity over traditional approaches. However, identification of high-affinity ligands to serve as PROTAC starting points remains challenging. As a complementary approach, we describe a class of molecules termed biological PROTACs (bioPROTACs)-engineered intracellular proteins consisting of a target-binding domain directly fused to an E3 ubiquitin ligase. Using GFP-tagged proteins as model substrates, we show that there is considerable flexibility in both the choice of substrate binders (binding positions, scaffold-class) and the E3 ligases. We then identified a highly effective bioPROTAC against an oncology target, proliferating cell nuclear antigen (PCNA) to elicit rapid and robust PCNA degradation and associated effects on DNA synthesis and cell cycle progression. Overall, bioPROTACs are powerful tools for interrogating degradation approaches, target biology, and potentially for making therapeutic impacts.

Biomaterials designed for tissue engineering should be nontoxic and nonimmunogenic and should achieve their intended functions. Treated dentin matrix (TDM), a bioactive extracellular matrix, is promising for tooth regeneration. However, the effect of sterilization on the surface properties of allogenous TDM in the animal model is unclear.The biological characteristics and influences of dental pulp stem cells (DPSCs) with autoclaved TDM (a-TDM) were studied using scanning electron microscopy, immunofluorescence microscopy, immunohistochemistry, and reverse transcription polymerase chain reaction in vitro. In addition, a-TDM was implanted in a mouse model for 6 weeks and was a substrate with DPSCs for tooth reconstruction in a goat animal model in vivo.Allogenous a-TDM induced and supported DPSCs to develop new dentin pulp-like tissues, enamel dental pulp, and cementum periodontal complexes. Immunohistochemistry data showed that the markers dentin sialoprotein, βⅢ-tubulin, dentin matrix protein 1, amelogenin, VIII factors, type I collagen, cementum-derived attachment protein, and scleraxis transcription factor were positive stained in toothlike tissue.Allogenous a-TDM served as an effective scaffold enabling DPSCs to proliferate and differentiate into a broad array of resident cells including odontoblasts, fibroblasts, vascular cells, and neural endings. Allogenous a-TDM with DPSCs can provide an ideal biomaterial for optimizing the regeneration of tooth material.

Cu2ZnSnS4 (CZTS) is a promising material for cost-effective thin film solar cells since its suitable band gap energy and large absorption coefficient in visible light region. In this study, we develop a multi-stage hot-pressing process to make a CZTS target, and conduct a pulsed laser deposition to prepare the CZTS thin film. The CZTS target and thin films have been studied to evaluate their properties as an absorption material for the thin film solar cells. Images and composition analysis from electron probe X-ray micro analyzer confirm the porosity and atomic composition of the hot-pressed CZTS target. The X-ray diffraction pattern indicates a better crystallinity of CZTS thin film after annealing at a higher temperature. Analysis from UV–vis spectroscopy on the annealed CZTS thin films suggests a large absorption coefficient in the visible light region and a band gap energy of 1.45 eV.

ObjectiveThe gut microbiota-derived metabolite, trimethylamine N-oxide (TMAO) plays an important role in cardiovascular disease (CVD). The fasting plasma TMAO was shown as a prognostic indicator of CVD incident in patients and raised the interest of intervention targeting gut microbiota. Here we develop a clinically applicable method called oral carnitine challenge test (OCCT) for TMAO-related therapeutic drug efforts assessment and personalising dietary guidance.DesignA pharmacokinetic study was performed to verify the design of OCCT protocol. The OCCT was conducted in 23 vegetarians and 34 omnivores to validate gut microbiota TMAO production capacity. The OCCT survey was integrated with gut microbiome, host genotypes, dietary records and serum biochemistry. A humanised gnotobiotic mice study was performed for translational validation.ResultsThe OCCT showed better efficacy than fasting plasma TMAO to identify TMAO producer phenotype. The omnivores exhibited a 10-fold higher OR to be high TMAO producer than vegetarians. The TMAO-associated taxa found by OCCT in this study were consistent with previous animal studies. The TMAO producer phenotypes were also reproduced in humanised gnotobiotic mice model. Besides, we found the faecal CntA gene was not associated with TMAO production; therefore, other key relevant microbial genes might be involved. Finally, we demonstrated the urine TMAO exhibited a strong positive correlation with plasma TMAO (r=0.92, pConclusionThe OCCT can be used to identify TMAO-producer phenotype of gut microbiota and may serve as a personal guidance in CVD prevention and treatment.Trial registration numberNCT02838732; Results.

This research aims to present the preparation, characterization and thermophysical properties of water-based microencapsulated n-eicosane PCM suspensions for thermal energy storage. n-eicosane PCMs are coated with urea–formaldehyde polymer shell. The microcapsules have been characterized by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses. The differential scanning calorimetry (DSC) is also performed for measurement of the latent heat value, melting and freezing temperatures, and specific heat of MEPCMs. Then, the thermophysical characteristics of the MEPCM suspension including the thermal conductivity km and viscosity µm have been measured at different particle concentration (2, 5 and 10 wt%) and different temperatures from 25 to 50 °C. New correlations are developed to predict the thermophysical characteristics of MEPCM suspensions. Furthermore, the application performance of artificial neural network for predicting of km and µm is evaluated, and it is found that a neural network with the optimum structure of 2-4-4-2 provides a very accurate prediction of the experimental results.

The amyloid-β peptides (Aβ40 and Aβ42) feature prominently in the synaptic dysfunction and neuronal loss associated with Alzheimer's disease (AD). This has been proposed to be due either to interactions between Aβ and cell surface receptors affecting cell signaling, or to the formation of calcium-permeable channels in the membrane that disrupt calcium homeostasis. In both mechanisms the cell membrane is the primary cellular structure with which Aβ interacts. Aβ concentrations in human bodily fluids are very low (pM-nM) rendering studies of the size, composition, cellular binding sites and mechanism of action of the oligomers formed in vivo very challenging. Most studies, therefore, have utilized Aβ oligomers prepared at micromolar peptide concentrations, where Aβ forms oligomeric species which possess easily observable cell toxicity. Such toxicity has not been observed when nM concentrations of peptide are used in the experiment highlighting the importance of employing physiologically relevant peptide concentrations for the results to be of biological significance. In this paper single-molecule microscopy was used to monitor Aβ oligomer formation and diffusion on a supported lipid bilayer at nanomolar peptide concentrations. Aβ monomers, the dominant species in solution, tightly associate with the membrane and are highly mobile whereas trimers and higher-order oligomers are largely immobile. Aβ dimers exist in a mixture of mobile and immobile states. Oligomer growth on the membrane is more rapid for Aβ40 than for the more amyloidogenic Aβ42 but is largely inhibited for a 1:1 Aβ40:Aβ42 mixture. The mechanism underlying these Aβ40-Aβ42 interactions may feature in Alzheimer's pathology.

As label-free biomarkers, the mechanical properties of nuclei are widely treated as promising biomechanical markers for cell type classification and cellular status evaluation. However, previously reported mechanical parameters were derived from only around 10 nuclei, lacking statistical significances due to low sample numbers. To address this issue, nuclei were first isolated from SW620 and A549 cells, respectively, using a chemical treatment method. This was followed by aspirating them through two types of microfluidic constriction channels for mechanical property characterization. In this study, hundreds of nuclei were characterized, producing passage times of 0.5 ± 1.2 s for SW620 nuclei in type I constriction channel (n = 153), 0.045 ± 0.047 s for SW620 nuclei in type II constriction channel (n = 215) and 0.50 ± 0.86 s for A549 nuclei in type II constriction channel. In addition, neural network based pattern recognition was used to classify the nuclei isolated from SW620 and A549 cells, producing successful classification rates of 87.2% for diameters of nuclei, 85.5% for passage times of nuclei and 89.3% for both passage times and diameters of nuclei. These results indicate that the characterization of the mechanical properties of nuclei may contribute to the classification of different tumor cells.