Search

The altered activity of the fructose transporter GLUT5, an isoform of the facilitated-diffusion glucose transporter family, has been linked to disorders such as type 2 diabetes and obesity. GLUT5 is also overexpressed in certain tumour cells, and inhibitors are potential drugs for these conditions. Here we describe the crystal structures of GLUT5 from Rattus norvegicus and Bos taurus in open outward- and open inward-facing conformations, respectively. GLUT5 has a major facilitator superfamily fold like other homologous monosaccharide transporters. On the basis of a comparison of the inward-facing structures of GLUT5 and human GLUT1, a ubiquitous glucose transporter, we show that a single point mutation is enough to switch the substrate-binding preference of GLUT5 from fructose to glucose. A comparison of the substrate-free structures of GLUT5 with occluded substrate-bound structures of Escherichia coli XylE suggests that, in addition to global rocker-switch-like re-orientation of the bundles, local asymmetric rearrangements of carboxy-terminal transmembrane bundle helices TM7 and TM10 underlie a 'gated-pore' transport mechanism in such monosaccharide transporters., 糖分を細胞内に輸送する膜たんぱく質の立体構造と動きを解明 -肥満やがんの抑制策に役立つ新たな知見-. 京都大学プレスリリース. 2015-10-01.

Identifying membrane proteins that can be produced and isolated in homogenous form in detergent is a lengthy trial-and-error process that can be facilitated by fluorescence-based screening approaches. We describe (1) the strategy and protocol of cloning by homologous recombination, (2) whole-cell and in-gel fluorescence measurements to estimate GLUT-GFP fusion protein yields, (3) use of size-exclusion chromatography monitored by fluorescence (FSEC) for assessing the homogeneity of the GLUT-GFP fusion proteins, and (4) the protocol for large-scale production and purification of the Bos taurus GLUT5 construct that enabled its crystal structure determination.

Optimising membrane protein production yields in Escherichia coli can be time- and resource-consuming. Here, we present a simple and effective Membrane protein Single shot amplification recipe: MemStar. This one-shot amplification recipe is based on the E. coli strain Lemo21(DE3), the PASM-5052 auto-induction medium and, contradictorily, an IPTG induction step. Using MemStar, production yields for most bacterial membrane proteins tested were improved to reach an average of 5mgL−1 per OD600 unit, which is significantly higher than yields obtained with other common production strategies. With MemStar, we have been able to obtain new structural information for several transporters, including the sodium/proton antiporter NapA.

The recent discovery of intramolecular isopeptide bonds formed between lysine and asparagine residues in certain bacterial cell-surface proteins represents a new component in nature's toolbox for stabilising proteins. Although isopeptide bonds are well known as intermolecular crosslinks in processes such as ubiquitylation, these intramolecular isopeptide bonds form autocatalytically during protein folding, as the reacting groups are brought together in a hydrophobic environment. First identified in the Ig-like pilin subunits of Gram-positive bacterial pili, these internal crosslinks provide stabilisation against chemical, thermal and mechanical stress and provide new opportunities for applications in biotechnology. The crucial role of structural biology and mass spectrometry in their discovery and characterisation raises the likelihood that further novel post-translational modifications resulting from intramolecular reactions in proteins await discovery.

The pili expressed by Streptococcus pyogenes and certain other Gram-positive bacterial pathogens are based on a polymeric backbone in which individual pilin subunits are joined end-to-end by covalent isopeptide bonds through the action of sortase enzymes. The crystal structure of the major pilin of S. pyogenes, Spy0128, revealed that each domain of the two domain protein contained an intramolecular isopeptide bond cross-link joining a Lys side chain to an Asn side chain. In the present work, mutagenesis was used to create mutant proteins that lacked either one isopeptide bond (E117A, N168A, and E258A mutants) or both isopeptide bonds (E117A/E258A). Both the thermal stability and proteolytic stability of Spy0128 were severely compromised by loss of the isopeptide bonds. Unfolding experiments, monitored by circular dichroism, revealed a transition temperature T(m) of 85 degrees C for the wild type protein. In contrast, mutants with only one isopeptide bond showed biphasic unfolding, with the domain lacking an isopeptide bond having a T(m) that was approximately 30 degrees C lower than the unaltered domain. High resolution crystal structures of the E117A and N168A mutants showed that the loss of an isopeptide bond did not change the overall pilin structure but caused local disturbance of the protein core that was greater for E117A than for N168A. These effects on stability appear also to be important for pilus assembly.

Many bacterial pathogens have long, slender pili through which they adhere to host cells. The crystal structure of the major pilin subunit from the Gram-positive human pathogen Streptococcus pyogenes at 2.2 angstroms resolution reveals an extended structure comprising two all-β domains. The molecules associate in columns through the crystal, with each carboxyl terminus adjacent to a conserved lysine of the next molecule. This lysine forms the isopeptide bonds that link the subunits in native pili, validating the relevance of the crystal assembly. Each subunit contains two lysine-asparagine isopeptide bonds generated by an intramolecular reaction, and we find evidence for similar isopeptide bonds in other cell surface proteins of Gram-positive bacteria. The present structure explains the strength and stability of such Gram-positive pili and could facilitate vaccine development.

Sodium/proton (Na+/H+) antiporters, located at the plasma membrane in every cell, are vital for cell homeostasis. In humans, their dysfunction has been linked to diseases, such as hypertension, heart failure and epilepsy, and they are well-established drug targets. The best understood model system for Na+/H+ antiport is NhaA from Escherichia coli, for which both electron microscopy and crystal structures are available. NhaA is made up of two distinct domains: a core domain and a dimerization domain. In the NhaA crystal structure a cavity is located between the two domains, providing access to the ion-binding site from the inward-facing surface of the protein. Like many Na+/H+ antiporters, the activity of NhaA is regulated by pH, only becoming active above pH 6.5, at which point a conformational change is thought to occur. The only reported NhaA crystal structure so far is of the low pH inactivated form. Here we describe the active-state structure of a Na+/H+ antiporter, NapA from Thermus thermophilus, at 3 Å resolution, solved from crystals grown at pH 7.8. In the NapA structure, the core and dimerization domains are in different positions to those seen in NhaA, and a negatively charged cavity has now opened to the outside. The extracellular cavity allows access to a strictly conserved aspartate residue thought to coordinate ion binding directly, a role supported here by molecular dynamics simulations. To alternate access to this ion-binding site, however, requires a surprisingly large rotation of the core domain, some 200against the dimerization interface. We conclude that despite their fast transport rates of up to 1,500 ions per second, Na+/H+ antiporters operate by a two-domain rocking bundle model, revealing themes relevant to secondary-active transporters in general.

Bacterial pili are cell-surface organelles that are critically involved in adhesion to host cells, leading to the colonization of host tissues and the establishment of infections. Whereas the pili of Gram-negative bacteria have been extensively studied, those of Gram-positive bacteria came to light only recently after the discovery and characterization of Corynebacterium diphtheriae pili. These newly discovered pili are formed by the covalent polymerization of pilin subunits catalyzed by sortase enzymes, making them fundamentally different from the noncovalent pilin assemblies of Gram-negative bacteria. Here, the expression, crystallization and preliminary crystallographic analysis of SpaA, which forms the shaft of one of the three types of pili expressed by C. diphtheriae, are reported. SpaA(53-486) crystals diffracted to 1.6 A resolution and belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 34.9, b = 64.1, c = 198.7 A, alpha = beta = gamma = 90 degrees .

Two crystal structures of the major pilin SpaD from C. diphtheriae have been determined at 1.87 and 2.5 Å resolution. The N-terminal domain is found to contain an isopeptide bond that forms slowly over time in the recombinant protein. Given its structural context, this provides insight into the relationship between internal isopeptide-bond formation and pilus assembly., The Gram-positive organism Corynebacterium diphtheriae, the cause of diphtheria in humans, expresses pili on its surface which it uses for adhesion and colonization of its host. These pili are covalent protein polymers composed of three types of pilin subunit that are assembled by specific sortase enzymes. A structural analysis of the major pilin SpaD, which forms the polymeric backbone of one of the three types of pilus expressed by C. diphtheriae, is reported. Mass-spectral and crystallographic analysis shows that SpaD contains three internal Lys–Asn isopeptide bonds. One of these, shown by mass spectrometry to be located in the N-terminal D1 domain of the protein, only forms slowly, implying an energy barrier to bond formation. Two crystal structures, of the full-length three-domain protein at 2.5 Å resolution and of a two-domain (D2-D3) construct at 1.87 Å resolution, show that each of the three Ig-like domains contains a single Lys–Asn isopeptide-bond cross-link, assumed to give mechanical stability as in other such pili. Additional stabilizing features include a disulfide bond in the D3 domain and a calcium-binding loop in D2. The N-terminal D1 domain is more flexible than the others and, by analogy with other major pilins of this type, the slow formation of its isopeptide bond can be attributed to its location adjacent to the lysine used in sortase-mediated polymerization during pilus assembly.

As we appreciate the importance of stabilising membrane proteins, the barriers towards their structure determination are being broken down. This change in mindset comes hand-in-hand with more effort placed on developing methods focused at screening for membrane proteins which are naturally stable in detergent solution or improving those that are not so. In practice, however, it is not easy to decide the best strategy to monitor and improve detergent stability, requiring a decision-making process that can be even more difficult for those new to the field. In this review we outline the importance of membrane protein stability with discussions of the stabilisation strategies applied in context with the use of crystallisation scaffolds and the different types of crystallisation methods themselves. Where possible we also highlight areas that we think could push this field forward with emerging technologies, such as X-ray free electron lasers (X-feL), which could have a big impact on the membrane protein structural biology community. We hope this review will serve as a useful guide for those striving to solve structures of both pro- and eukaryotic membrane proteins.

Bacterial pili are long, multi-subunit protein assemblies that extend from bacterial surfaces, mediating adhesion and colonisation. The recently characterised pili expressed by Gram-positive pathogens represent a novel variation; completely covalent polymers in which sortase-mediated isopeptide bonds link successive pilin subunits. Recent structural studies of the component pilins have revealed a common pattern of tandem immunoglobulin (Ig)-like domains, joined end-on-end. This long thin assembly is further stabilised by autocatalytically generated isopeptide bond crosslinks within the domains, joining Lys and Asn(or Asp) side chains. Specialised subunits at the tip and the base complete the assembly, with the tip pilins presenting novel adhesive structures.

Cell-surface pili are important virulence factors that enable bacterial pathogens to adhere to specific host tissues and modulate host immune response. Relatively little is known about the structure of Gram-positive bacterial pili, which are built by the sortase-catalyzed covalent crosslinking of individual pilin proteins. Here we report the 1.6-Å resolution crystal structure of the shaft pilin component SpaA from Corynebacterium diphtheriae , revealing both common and unique features. The SpaA pilin comprises 3 tandem Ig-like domains, with characteristic folds related to those typically found in non-pilus adhesins. Whereas both the middle and the C-terminal domains contain an intramolecular Lys–Asn isopeptide bond, previously detected in the shaft pilins of Streptococcus pyogenes and Bacillus cereus , the middle Ig-like domain also harbors a calcium ion, and the C-terminal domain contains a disulfide bond. By mass spectrometry, we show that the SpaA monomers are cross-linked in the assembled pili by a Lys–Thr isopeptide bond, as predicted by previous genetic studies. Together, our results reveal that despite profound dissimilarities in primary sequences, the shaft pilins of Gram-positive pathogens have strikingly similar tertiary structures, suggesting a modular backbone construction, including stabilizing intermolecular and intramolecular isopeptide bonds.

Pili are long, filamentous protein assemblies which extend from the surfaces of many bacteria, and mediate their adhesion to host cells and other matrices. For pathogenic bacteria they are critical to colonization and infection. Whereas the pili of gram-negative bacteria are formed by noncovalent association of their pilin subunits, those of gram-positive bacteria are assembled with the aid of sortase enzymes that mediate the formation of covalent isopeptide bonds between successive pilin subunits. Sequence comparisons, mutagenesis and crystallography have implicated specific lysine residues in the formation of these intermolecular bonds and mass spectral analyses of native and modified pili have now provided definitive proof of these linkages. Crystallographic studies of pilin subunits have also led to the unexpected discovery of internal isopeptide crosslinks formed between lysine and asparagine residues. These, too, have been confirmed by mass spectrometry.