Search

Heterogeneous two-dimensional layered membranes reconstructed from natural or synthetic van der Waals materials enable novel ion transport mechanisms by coupling with the chemistry and optoelectron...

Constructing molecule@support composites is an attractive strategy to realize heterogeneous molecular electrocatalysis. Herein, we synthesized metal-organic framework (MOF)-supported molecular catalysts for hydrogen evolution and oxygen reduction reaction (HER/ORR). Ligand exchange strategy was used to prepare molecule@support hybrids due to the same functional group. A series of hybrids were obtained using Co porphyrin (1) and different MOFs including MIL-88(Fe), MOF-5(NiCo) and UIO-66(Zr). The 1@MOF-5(NiCo) had the best HER and ORR activity compared with 1@MIL-88(Fe) and 1@MOF-5(NiCo). These hybrids also exhibited tunable selectivity for ORR with four-electron process, which can be attributed to the synergistic effect of porphyrin molecules and MOFs. This work provides a possibility for molecular catalysts to improve activity of HER and tune selectivity of ORR.

Several 2D nanosheets of porphyrin MOFs with various transition-metal clusters as metal nodes were prepared via a simple solvothermal method to apply in the photocatalytic hydrogen evolution, in which the hydrogen production rate of the optimal NS-Cu was as high as 15.39 mmol•g−1•h−1. A series of experimental technologies especially cyclic voltammetry (CV) and Mott-Schottky (M-S) had been adopted to investigate the charge-transfer property of photo-generated electron-hole pairs, it was found that the uniformly dispersed Cu-clusters nodes in the original 2D MOFs played a key role in the electron transfer process, that was, the photo-generated electron transferred from excited state eosin-Y to the Cu-clusters nodes for the efficient hydrogen evolution. The excellent photocatalytic performance could be attributed to the reversible oxidation-reduction process of CuII/CuI, which had excellent electron-receiving and electron-outputting capabilities. Our results provided a novel avenue to adapt the uniformly dispersed metal nodes in the original MOFs as cost-effective noble-metal-free cocatalysts with very high atom-utilization efficiency to improve the photocatalytic hydrogen evolution performance in dye-sensitized system.

Morphology-controlled electrocatalysts with the ability of CO2 adsorption/activation, mass transfer, high stability and porosity are much desired in electrochemical CO2 reduction reaction (CO2RR). Here, three kinds of multi-dimensional nanostructures (i.e., hollow sphere, nanosheets and nanofibers) have been successfully produced through the modulation of porphyrin-based covalent organic frameworks (COFs) with various modulators. The obtained nanostructures with high-stability, large surface-area, and single metal sites enable efficient CO2RR into CH4. Notably, they all exhibit higher FECH4 (hollow sphere, 68.2%; nanosheet, 64.2% and nanofiber, 71.0%, -0.9 V) than COF-366-Cu (43.0%, -0.9 V) after morphology control. Noteworthy, the FECH4 of COF-366-Cu (HS) keeps higher than 52.4% over a wide potential range from -0.9 V to -1.1 V and the achieved FECH4+C2H4 (82.8%, -0.9 V) is superior to most of reported COFs and copper-based electrocatalysts. This work paves a new way in the exploration of COF-based multi-dimensional nanostructures applicable in efficient CO2RR to CH4.

Direct photocatalyzed hydrogen atom transfer (d-HAT) can be considered a method of choice for the elaboration of aliphatic C–H bonds. In this manifold, a photocatalyst (PCHAT) exploits the energy of a photon to trigger the homolytic cleavage of such bonds in organic compounds. Selective C–H bond elaboration may be achieved by a judicious choice of the hydrogen abstractor (key parameters are the electronic character and the molecular structure), as well as reaction additives. Different are the classes of PCsHAT available, including aromatic ketones, xanthene dyes (Eosin Y), polyoxometalates, uranyl salts, a metal-oxo porphyrin and a tris(amino)cyclopropenium radical dication. The processes (mainly C–C bond formation) are in most cases carried out under mild conditions with the help of visible light. The aim of this review is to offer a comprehensive survey of the synthetic applications of photocatalyzed d-HAT.

Iron porphyrins are synthesized by systematically introducing electron withdrawing groups (EWGs) on pyrroles to evaluate the relationship between rate (k) and overpotential (η). The results indicate that while EWGs lead to a rise in the thermodynamic FeIII/II reduction potential (E0), the potential of O2 reduction reaction (ORR) does not scale with E0. More importantly, the iron porphyrins with higher E0 shows an order of magnitude higher rate of ORR than unsubstituted iron tetraphenyl porphyrin. This contests the scaling relationship often offered to predict rates of ORR by iron porphyrins based on their E0. Mechanistic investigations reveal that the rate determining steps of ORR changes between these iron porphyrins with EWG’s as the pKa and E0 of several key intermediate species have likely changed on altering the macrocycle. These results suggests that linear dependence of log(rate) on E0 or η may only be valid for complexes where the rds of ORR remains the same.

A facile synthetic strategy was developed for the synthesis of meso -tetrakis(4-formyl-phenyl)porphyrin and meso -tetrakis(3-formylphenyl)porphyrin from commercially available starting materials. This method gives facile access to practical amounts of these synthons in high purity and good overall yield, without employing laborious chromatographic separations. The reduction of the respective carboxylic acid-functionalized porphyrins by LiAlH4 afforded the tetra(benzylalcohol)porphyrin intermediates, subsequently utilized in a Parikh-Doering oxidation to selectively afford the desired tetraformylated products. The inherent ease of synthesis of these porphyrin building blocks provides a convenient pathway for the synthesis of various macromolecular and supramolecular architectures for applied chemical technologies.

Conjugated molecular thin films have potential for novel optoelectronic devices such as flexible solar cells and display devices. However, a detailed understanding of their excited state dynamics is crucial for their technological applications. Tetrapyrrole complexes are an important class of conjugated organic molecules for optoelectronic applications due to their high light gathering ability and thermal stability. In this review, we summarize excited state dynamics of porphyrin and phthalocyanine molecular thin films investigated by pump–probe techniques. The relaxation dynamics for metallo-phthalocyanine molecules are observed to be ultrafast in nature and are in femtosecond time scale while that for metal free phthalocyanine are moderately fast. In case of metallo-phthalocyanines exciton lifetime is much longer than for metal free phthalocyanines. The central metal atom plays an important role in the excited state dynamics of porphyrin molecular thin films thus providing additional excitation channels. Time-resolved photoemission spectroscopy reveals about the evolution of charge transfer excitons at donor–acceptor interfaces and their dissociation mechanism. In case of metallo-phthalocyanines the exciton transport is dominated by hopping mechanism rather than spatial coherent length of excitons. The pump–probe studies provide a basis for appropriate selection of molecules for technological applications.

Splitting of water into hydrogen and oxygen under visible light is an emerging phenomenon in green energy technology. Nevertheless, selecting of an appropriate photocatalyst is rather significant to enhance the hydrogen production in large scale. In this context, organic photocatalyst have received a considerable attention owing to their larger surface area, control in diffusion adsorption, nanostructures and electronic properties. Herein, we have developed five either free base or transition metalated porphyrin - napthalimide based donor-acceptor systems (PN1 - PN5) and studied their morphology, electronic properties and catalytic behaviour. Detailed studies suggest that the Co (II) substituent D-A system (PN2) displayed a well-aligned one-dimensional (1D) nanowire with high electrical conductivity promotes remarkable photocatalytic hydrogen production rate (18 mMg-1h-1) when compared to that of porphyrin-based derivatives as reported till now. Thus, these results propose to investigate on diverse metalated π-conjugated materials as photocatalysts for hydrogen production.

In this work, a covalent organic framework (COF), which is constructed by the building blocks of [5,10,15,20-tetrakis(4-aminophenyl)porphinato]copper(II) (CuTAPP) and p-benzaldehyde, is employed to integrate with TiO2 for the purpose of establishing a Z-scheme hybrid. Within the system, isonicotinic acid performs the role of a bridge that connects the two components through a coordination bond. Further photocatalytic application reveals the hybrid framework is able to catalyze CO2 conversion under simulated solar light, resulting in CO production rate of 50.5 μmol g−1 h−1, about 9.9 and 24.5 times that of COF and pristine TiO2, respectively. The ameliorated catalytic performance owes much to the porphyrin block acting as photosensitizer that augments the light absorbance, and the establishment of Z-scheme system between the inorganic and organic components that enhances the separation of the carriers. In addition, the chemical bridge also ensures a steady usage and stable charge delivery in the catalysis. Our study sheds light on the development of versatile approaches to covalently incorporate COFs with inorganic semiconductors.

In recent years, porphyrins with a similar structure to chlorophyll are often used as photosensitizers or reaction centers to improve the light absorption capacity or catalytic selectivity of existing photocatalytic systems. However, photocatalytic reactions include photoelectric conversion, photocarrier transport, and surface reaction, which requires the overall design of porphyrin-based photocatalysts. In this paper, the research work of porphyrin molecular design in heterogeneous photocatalysis in recent years is reviewed. Besides, the application of interface control and spatial confinement effect in porphyrin-based hybrid photocatalyst is introduced. Finally, the future development direction of porphyrin-based photocatalysts is prospected and the main challenges in the research of porphyrin-based photocatalysts is given.

Encapsulating metal nanoparticles (MNPs) inside the specific porous materials is considered as a feasible strategy to prepare ultrafine MNPs with high stability. Herein, ultrafine Ru nanoparticles (NPs) with a mean size of 3.2 nm encapsulated in a N-doped porous carbon (NC) derived from the pyrolysis of a new porphyrin framework (POF) were fabricated via a simple wet chemical method, in which POF was synthesized using 4,4'-biphenyldicarboxaldehyde and pyrrole as raw materials. Reconstructed slices tomographic characterization confirmed the successful encapsulation of Ru NPs in POF-NC600 (pyrolysis temperature T = 600 °C). Due to the confinement effects and anchoring effects of POF-NC600, Ru@POF-NC600 shows the smallest particle size of Ru NPs and the highest hydrogen production performance toward the methanolysis of ammonia borane (AB) among the investigated catalysts, providing a record initial turnover frequency (TOF) value of 727 min-1 at 25 °C as compared to those heterogeneous catalysts ever reported. Systematic investigations reveal that pyridinic-N plays a pivotal role in the particle size distribution of Ru NPs and catalytic activity of the catalyst. Extended theoretical calculations confirm that Ru atoms attached to pyridinic-N display a higher stability than those attached to pyrrolic-N and C atoms. As a result, pyridinic-N, as an efficient anchoring site, determinates the dispersity and size distribution of Ru NPs, thus affecting the catalytic activity of the catalyst. The more pyridinic-N, the better the catalytic activity. A series of isotopic experiments were performed, and it is found for the first time that the cleavage of the O-H bond in methanol is involved in the rate-determining step (RDS) of AB methanolysis. This work offers insights into rationally designing stable and ultrafine metal NPs confined in the pyridinic-N-rich composites for various application.

Developing durable photocatalysts with highly efficient antibiotics degradation is crucial for environment purification. Herein, tetra (4-carboxyphenyl) porphyrin (TCPP) was loaded onto the surface of Bi2MoO6 microspheres to gain hierarchical organic–inorganic TCPP/Bi2MoO6 (TCPP/BMO) heterojunctions via a facile impregnation strategy. The catalytic properties of these catalysts were comprehensively investigated through the photodegradation of tetracycline hydrochloride (TC) under visible light. Among all the TCPP/BMO heterojunctions, the highest photodegradation rate constant (0.0278 min−1) was achieved with 0.25 wt% TCPP (TCPP/BMO-2), which was approximately 1.15 folds greater than that of pristine Bi2MoO6 and far superior to pure TCPP. The extremely high photocatalytic performance is attributed to the interfacial interaction between TCPP and Bi2MoO6, which favors the efficient separation of charge carriers and the enhancement of visible-light absorbance. TCPP/BMO-2 possesses high mineralization capability and good recycling performance. Photo-induced O2–, h+, and OH were mainly responsible for the degradation of TC. The degradation pathways of TC and toxicity of degradation intermediates were analyzed based on the intermediates detected by the high performance liquid chromatography-mass spectrometer (HPLC–MS) and the toxicity assessment by the quantitative structure–activity relationship (QSAR) prediction. A possible photocatalytic mechanism over TCPP/BMO is proposed. This work offers an insight in developing the porphyrin-based organic–inorganic heterojunctions for effectively remedying pharmaceutical wastewater.

Chemical scavenging of singlet oxygen by iodobenzenein the presence of (triethyleneglycol)monomethyl ether led to the formation of almost spherical nano-structured iodosylbenzene in water, water/acetonitrile and acetonitrile. To our knowledge, it is the first report on the direct aerobic photooxidative synthesis of iodosylbenzene.A polymer supported cationic porphyrin, nanoAmbSO3@H2TMPyP, was used as the photosensitizer. The nanoparticles, were characterized by various spectrophotometric and microscopic methods. The reactivity of the secondary oxidant for the oxidation of organic substrates was studied in the oxidation of methyl phenyl sulfide catalyzed by manganese meso-tetrakis(2-methylphenyl)porphyrin.The synthesis of the reactive secondary oxidant, PhIO, is suggestedas an applicable strategy to overcome the problem of very short lifetime of singlet oxygen in organic solvents and water, which decreases the efficiency of singlet oxygen due to the involvement of the oxidant in unwanted physical and chemical quenching pathways.It is noteworthy that due to very short lifetime of singlet oxygen, most of the singlet oxygen produced in the presence of different photosensitizers is deactivated by other species to return to its triplet ground state by physical or non-productive chemical quenching.

A series of tetraphenylporphyrin-based thermotropic liquid crystals containing oligo(dimethylsiloxane) were synthesized. These disc-coil hybrids form ordered nanostructures with periodic sizes on the sub-5 nm scale, including oblique columnar, lamellar, and hexagonal columnar phases. Films with sub-5 nm line patterns and homeotropically aligned columnar structures can be obtained by substrate-induced self-assembly.

The performance of CuDEPP was significantly influenced by regulating electrolytes with different anions and concentrations. The porphyrin complex showed better electrochemical performance coupling with compatible electrolyte.

International audience; Out-of-plane deformations of metalloporphyrin skeletons have been well documented as playing important roles in relevant biological processes. In contrast, out-of-plane binding to the N-core of large metal cations as period 6 post-transition elements has remained poorly investigated. We describe herein monometallic complexes of Pb(II) and Bi(III) with 5,10 single strapped porphyrin ligands bearing a carboxylic acid group with two possible “in/out” orientations, in which the metal ions are bound to the N-core of the macrocycle either from the strap side or from the naked side. In the case of Pb(II), both the kinetics of insertion and resulting OOP stereoselectivity are influenced by the “in/out” stereoisomerism of the overhanging COOH. Remarkably, Bi(III) insertion proceeded quasi-instantaneously at RT owing to the transmetalation of its Pb(II) counterpart. The addition of a cyano group in position of the carboxylic acid group generates a ligand exhibiting an increased stereoselectivity in the metalation processes with Pb(II) and Bi(III): these cations are coordinated exclusively from the naked and strap side of the macrocycle, respectively. This difference in behavior is likely explained by steric hindrance for the divalent cation, which is counterbalanced by the establishment of the second sphere of coordination with the strap for the trivalent cation. Such a behavior is thought of interest for the further design of adaptable supramolecular coordination assemblies.

To estimate the adsorption distribution of cationic dyes on the inorganic nanosheets, the fluorescence behavior of cis-DMPyP, which is a di-cationic porphyrin, was investigated using self-fluoresce...

3, 7, 23, 27-Tetrabromo[36]octaphyrin 2 was synthesized as a novel octaphyrin bearing two meso-free positions. Surprisingly, its ZnII and NiII complexation reactions produced a directly fused porphyrin(2.1.1.1) dimer 6, and a meso-α fused N-confused porphyrin (NCP) dimer 7, as the first example of NCP tape, respectively, via transannular C−C bond formation. While 6 exhibits a diatropic ring-current effect owing to the global 36π Möbius aromaticity, 7 shows a paratropic ring-current effect due to the global Hückel 36π antiaromaticity. In addition, the oxidation of 7 with PbO₂ allowed for formation of its two-electron oxidized species 9 that exhibited a diatropic ring-current effect due to the global Hückel 34π aromaticity. This work has demonstrated that meso-free large expanded porphyrins can be a promising platform to produce novel fused porphyrinoids.

Developing large-scale electrocatalysts using molecular complexes for the oxygen evolution reaction (OER) is of great importance. Herein, four cobalt porphyrins and corroles are deposited on electrode substrates using a simple and fast electropolymerization method. Our results showed that Co-1-P@CC, formed by electropolymerizing Co tetrakis(p-N-pyrrolylphenyl)porphyrin (Co-1-P) on carbon cloth (CC), is the most active OER catalyst in the examined Co porphyrins and corroles in alkaline aqueous solutions by displaying an onset overpotential of 380 mV. Long-term electrolysis tests confirmed the stability of these electropolymerized films by functioning as OER electrocatalysts.

Coronavirus disease 2019 is a serious disease that causes acute respiratory syndrome and negatively affects the central nervous system. SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) crosses the blood-brain barrier due to the S protein on the surface of the viral particles. Thus, it is important to develop compounds that not only have an inhibitory effect but are also capable of completely deactivating the S-protein function. This study describes the purposeful modification of porphyrins and proposes compounds, asymmetrically hetaryl-substituted porphyrins with benzothiazole, benzoxazole, and N-methylbenzimidazole residues, to deactivate the S-protein functions. Molecular docking of SARS-CoV-2 proteins with hetaryl-substituted porphyrins showed that the viral proteins S-, N-, and nsp13 exhibited the highest binding affinity. Hetaryl-substituted porphyrins form strong complexes (13–14 kcal/mol) with the receptor-binding domain of the S protein, while the distance from the porphyrins to the receptor-binding motif (RBM) does not exceed 20 Å; therefore, RBM can be oxidized by 1O2, which is generated by porphyrin. Hetaryl-substituted porphyrins interact with the nucleocapsid protein in the serine/arginine-rich region, and a number of vulnerable amino acid residues are located in the photooxidation zone. This damage complicates the packaging of viral RNA into new virions. High-energy binding of hetaryl-substituted porphyrins with the N- and C-terminal domains of nsp13 was observed. This binding blocks the action of nsp13 as an enzyme of exoribonuclease and methyltransferase, thereby preventing RNA replication and processing. A procedure for the synthesis of hetaryl-substituted porphyrins was developed, new compounds were obtained, their structures were identified, and their photocatalytic properties were studied., Graphical abstract Image 1

The phototoxicity of photosensitizers (PSs) is a double-edged sword with one edge beneficial for destroying tumors while the other is detrimental to normal tissues, and the conventional "OFF-ON" strategy provides temporary inhibition so that phototoxicity would come sooner or later due to the inevitable retention and transformation of PSs in vivo. We herein put forward a strategy to convert "double-edged sword" PSs into "single-edged knife" ones with simultaneously persistent phototoxicity inhibition and alternative multiple therapeutical activation. The Chlorin e6 (Ce6) as the PS model directly assembles with Cu2+ ions into nanoscale frameworks (nFs) whose Cu2+-coordination includes both carboxyl groups and a porphyrin ring of Ce6 instead of Fe3+/Mn2+-coordination with only carboxyl groups. Compared to the high phototoxicity of Ce6, the nFs exhibit efficient energy transfer due to the dual-coordination of paramagnetic Cu2+ ions and the aggregation, achieving the persistent and high phototoxicity inhibition rate of >92%. Alternatively, the nFs not only activate a high photoacoustic contrast and near-infrared (NIR)-driven photothermal efficacy (3.5-fold that of free Ce6) due to the aggregation-enhanced nonradiative transition but also initiate tumor microenvironment modulation, structure disassembly, and chemodynamic effect by Cu2+ ions. Given these merits, the nFs achieve long-term biosecurity, no retina injury under sunlight, and a higher therapeutical output than the photodynamic effect of Ce6. This work presents a possibility of converting numerous highly phototoxic porphyrins into safe and efficient ones.

Porphyrin-based photosensitizers are conventional photodynamic agents that are used clinically. However, their clinical applications have been overshadowed by poor water solubility. In addition, they have weak tumor selectivity, which may cause undesirable side effects. The preparation of novel porphyrin derivatives has been explored for potential applications in photodynamic therapy (PDT). To achieve this goal, lactose-conjugated porphyrin nanoparticles (Lac-Por NPs) have been synthesized and characterized. PDT with Lac-Por NPs exhibited tumor-specific cytotoxicity in lactose receptor-overexpressing HepG2 cells in vitro and in vivo. In summary, we designed and synthesized lactose conjugate porphyrins with enhanced water solubility and tumor selectivity. This work expands the application range of porphyrin-based photosensitizers for cancer treatment.

Polymeric carbon nitride materials show intriguing prospects in numerous light-to-energy conversion applications, but seldom studies focus on their triplet energy transfer, leading to the insufficient lifetime for the photochemical process. Inspired by the porphyrin molecular photocatalyst, single-atom sites (Fe-N4) as triplet sensitizing sites were fabricated in g-C3N4 for the preparation of Fe-g-C3N4, which processes a long-lived triplet emissive state (τPH = 4.93 μs). But under realistic condition for the large-scale production of catalyst, single atoms are inevitable to sinter, resulting in the formation of other metal species. Therefore, the photooxidation of 1,5-dihydroxynaphthalene (1,5-DHN) and the photocatalytic E-Z Isomerization of stilbene were selected as the model reactions to evaluate the influence of various Fe species on the triplet energy transfer. It was found that Fe-N4 sites promote the triplet energy transfer process, while Fe nanoclusters (Fe0) promote the electron transfer and inhibit triplet energy transfer. This finding provides guidance for the rational design of photocatalysts to efficiently improve triplet energy transfer process and its application.

Among the high-performance and engineering polymers, polyimides and the closely related polyetherimide (PEI) stand out by their capability to react with nucleophiles under relatively mild conditions. By targeting the phthalimide groups in the chain backbone, post-functionalization offers a pathway to adjust surface properties such as hydrophilicity, solvent resistance, and porosity. Here, we use ultrathin PEI films on a Langmuir trough as a model system to investigate the surface functionalization with ethylene diamine and tetrakis(4-aminophenyl)porphyrin as multivalent nucleophiles. By means of AFM, Raman spectroscopy, and interfacial rheology, we show that hydrolysis enhances the chemical and mechanical stability of ultrathin films and allows for the formation of EDC/NHS-activated esters. Direct amidation of PEI was achieved in the presence of a Lewis acid catalyst, resulting in free amine groups rather than cross-linking. When comparing amidation with hydrolysis, we find a greater influence of the latter on material properties. Graphic abstract

Biocompatible photo-driven producers of singlet oxygen can inhibit the growth of drug-resistant bacteria and tumors. In order to develop bacteria targeting generator of singlet oxygen for tumor and bacterial treatment, a metal porphyrin liposome (Phy–Mn–Ls) was prepared by the metal coordination reaction and self-assembly of porphyrin compounds with bacteria targeting polymer (HS–PEG–chol). The photo-driven production of 1O2, binding with bovine serum protein (BSA) and lipase, toxicity to MCF-7 breast cancer cells and inhibitory effect on the growth of Escherichia coli have been investigated. Fluorescence analysis results show that Phy–Mn–Ls can bind to lipase, and it shows less effect on the conformation of BSA and is low cytotoxicity without irradiation. In particular, the good biocompatibility made Phy–Mn–Ls exhibit good photosensitive antibacterial activity and anti-tumor properties. The results demonstrate that the coordination of HS–PEG–chol with metal-phorphrin coodination is an effective way to develop bacteria targeting nano-complexes (Phy–Mn–Ls) for lipase affinity and photodriven bacteria treatment.

Photocatalysis plays a significant role in the field of environment purification and energy conversion. In this work, a series of visible-light-responsive tetraphenylporphyrin (TPP)/BiOBr nanocomposite was prepared via a facile solvothermal method, and their photocatalytic activity toward the degradation of tetracycline (TC) and ciprofloxacin was evaluated and compared. Spectroscopic analysis demonstrates that TPP/BiOBr nanocomposite displays higher carrier mobility, results in generating numerous superoxide radical, hydroxyl radical, and holes under visible-light photoirradiation. And the degradation rate constant of TC for 1 wt% TPP/BiOBr is about 0.013 min−1, 2.1 times higher than that of single BiOBr. The introduction of TPP into BiOBr is found to act as a key role in determining photocatalytic efficiency. Based on the favorable photoelectrochemical properties and photocatalytic performance, porphyrin modified semiconductor catalyst can be employed as a high-performance photocatalyst in the treatment of antibiotic wastewater.

In the past decades, many attempts have been made to mimic the energy transfer (EnT) in photosynthesis, a key process occurring in nature that is of fundamental significance in solar fuels and sustainable energy. Metal-organic frameworks (MOFs), an emerging class of porous crystalline materials self-assembled from organic linkers and metal or metal cluster nodes, offer an ideal platform for the exploration of directional EnT phenomena. However, placing energy donor and acceptor moieties within the same framework with an atomistic precision appears to be a major synthesis challenge. In this work, we report the design and synthesis of a highly porous and photoactive N,N'-bicarbazole- and porphyrin-based mixed-ligand MOF, namely, NPF-500-H2TCPP (NPF = Nebraska porous framework; H2TCPP = meso-tetrakis(4-carboxyphenyl)porphyrin), where the secondary ligand H2TCPP is incorporated precisely through the open metal sites of the equatorial plane of the octahedron cage resulting from the underlying (4,8) connected network of NPF-500. The efficient EnT process from N,N'-bicarbazole to porphyrin in NPF-500-H2TCPP was captured by time-resolved spectroscopy and exemplified by photocatalytic oxidation of thioanisole. These results demonstrate not only the capability of NPF-500 as the scaffold to precisely arrange the donor-acceptor assembly for the EnT process but also the potential to directly utilize the EnT process for photocatalytic applications.

High-efficiency photocatalysis in metal-organic frameworks (MOF) and MOF nanosheets (NSs) are often limited by their short-lived charge separation as well as self-quenching. Here, we propose to use the energy-transfer process (EnT) to increase charge separation, thus enhancing the catalytic performance of a series of MOF NSs. With the use of NS, the photocatalyst can also be well isolated to reduce self-quenching. Tetrakis(4-carboxyphenyl) porphyrin (H4 TCPP) and 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) linkers were chosen as the acceptor and donor moieties, respectively. Accounting for the precise spatial design afforded by the MOF NSs, the donor and acceptor moieties could be closely positioned on the NSs, allowing for an efficient EnT process as well as a high degree of site isolation. Two templates, donor-on-acceptor NS and acceptor-on-donor NS catalysts, were successfully synthesized, and the results show that the second one has much enhanced catalytic performances over the first one due to site-isolated active photocatalysts.

Site-specific functional polymers are generally synthesized from functionalized chain transfer agents (CTA) in the presence of catalysts. However, the poor solubility or chemical inertness of CTAs may lead to polymerizations uncontrollable. Now, this issue is addressed by proposing a strategy of designing chain-transfer-catalyst (CTC) that combines catalyst and CTA into one. The occurrence of catalytic effect naturally triggers the chain transfer process to give catalyst-labeled polymers with well-defined structures. As a proof-of-concept, cobalt(III) porphyrin catalysts with one, two and four hydroxyl groups act as efficient CTCs, giving the corresponding site-specific functional poly(propylene carbonate)s (PPC), diversifying the topology of polymers. Furthermore, porphyrin-capped PPCs with controllable Mn in the range of 1,000–16,800 g mol−1 were obtained by using monofunctional CTC (CTCOH). Moreover, different from traditional “catalyst+CTA” systems, a novel dynamic network transfer mechanism of CTCOH was proposed. This study provides a CTC strategy for the synthesis of site-specific functional polymers.

Herein, we reported a self-assembled fabrication of a network nanozyme (TMPyP-pSC4@GNPs) and a glucose-recognition molecule (APBA) for highly stable and selective glucose sensing. By involving the ...

Metal–organic frameworks (MOFs) with plenty of active sites and high porosity have been considered as an excellent platform for the electroreduction of CO2, yet they are still restricted by the low...

Coproporpyhrin III is the substrate of coproporphyrin ferrochelatases (CpfCs). These enzymes catalyse the insertion of ferrous iron into the porphyrin ring. This is the penultimate step within the coproporphyrin-dependent haeme biosynthesis pathway. This pathway was discovered in 2015 and is mainly utilised by monoderm bacteria. Prior to this discovery, monoderm bacteria were believed to utilise the protoporphyrin-dependent pathway, analogously to diderm bacteria, where the substrate for the respective ferrochelatase is protoporphyrin IX, which has two propionate groups at positions 6 and 7 and two vinyl groups at positions 2 and 4. In this work, we describe for the first time the interactions of the four-propionate substrate, coproporphyrin III, and the four-propionate product, iron coproporphyrin III (coproheme), with the CpfC from Listeria monocytogenes and pin down differences with respect to the protoporphyrin IX and haeme b complexes in the wild-type (WT) enzyme. We further created seven LmCpfC variants aiming at altering substrate and product coordination. The WT enzyme and all the variants were comparatively studied by spectroscopic, thermodynamic and kinetic means to investigate in detail the H-bonding interactions, which govern complex stability and substrate specificity. We identified a tyrosine residue (Y124 in LmCpfC), coordinating the propionate at position 2, which is conserved in monoderm CpfCs, to be highly important for binding and stabilisation. Importantly, we also describe a tyrosine-serine-threonine triad, which coordinates the propionate at position 4. The study of the triad variants indicates structural differences between the coproporphyrin III and the coproheme complexes. ENZYME: EC 4.99.1.9.

G-quadruplex (G4) ligand-induced DNA damage has been involved in many physiological functions of cells. Herein, cationic porphyrin (TMPyP4)-mediated DNA oxidation damage was investigated aiming at mitochondrial G4 DNA (mt9438) and its structural analogue of the thrombin-binding aptamer (TBA). TMPyP4 is found to stabilize TBA G4 but destabilize mt9438. For two resulting DNA-TMPyP4 assemblies, the distinct light-induced singlet oxygen (1O2) generation and the subsequent DNA damage were found. For mt9438-TMPyP4, a slower 1O2-induced DNA damage takes place and results in the formation of DNA aggregation. In contrast, 1O2 tends to promote DNA unfolding in a relatively faster rate for TBA-TMPyP4. Despite of such distinct DNA damage behavior, UV resonance Raman spectra reveal that for both mt9438-TMPyP4 and TBA-TMPyP4 the DNA damage commonly stems from the guanine-specific oxidation. Our results clearly indicate that the ligand-mediated DNA damage is strongly dependent on the initial interplay between DNA and the ligand.

Accurate control of the layer number of orderly stacked 2D polymers has been an unsettled challenge in self-assembly. Herein we describe the fabrication of a bilayer 2D supramolecular organic framework from a monolayer 2D supramolecular organic framework in water by utilizing the cooperative coordination of a rod-like bipyridine ligands to zinc porphyrin subunits of the monolayer network. The monolayer supramolecular framework is prepared from the co-assembly of an octacationic zinc porphyrin monomer and cucurbit[8]uril (CB[8]) in water through CB[8]-encapsulation-promoted dimerization of 4-phenylpyridiunium subunits that the zinc porphyrin monomer bear. The bilayer 2D supramolecular organic framework exhibits structural regularity in both solution and the solid state, which is characterized by synchrotron small-angle X-ray scattering and high-resolution transmission electron microscopic techniques. Atomic force microscopic imaging confirms that the bilayer character of the 2D supramolecular organic framework can be realized selectively on the micrometer scale.

In photocatalysis, the most efficient way to separate photogenerated electron-hole pairs has been extensively studied. However, the methods to increase the quantities of free electrons are neglected. Herein, we used a self-assembly method to fabricate MTCPP/TiO2 composite materials with a series of metalloporphyrins (MTCPPs, M = Fe, Co, Zn) as sensitizers to modify TiO2 nanosheets. First, abundant carboxyl and hydroxyl on porphyrin were adsorbed by metal ions. Then, the remaining carboxyl and hydroxyl on porphyrin were anchored on the surface of TiO2 nanosheets. Finally, MTCPP/TiO2 was obtained by a layer-by-layer self-assembly process. MTCPP broadens the light response of TiO2 from ultraviolet light to visible light and enhances the CO2 adsorption ability. Moreover, metal ions coordinating with porphyrin regulate the electron density of the porphyrin ring and provide a stronger π feedback bond, which promote charge separation. Consequently, by optimizing the type of metal ion, the yield of ZnTCPP/TiO2 composites reached 109.33 μmol/(g h) of CO and 9.94 μmol/(g h) of CH4, which was more than 50 times that of pure TiO2. This study proposes a possible visible-light-induced CO2 reduction mechanism of metal-ion-based photocatalysis, which provides great insights into optimizing the designation of efficient photocatalysis.

The crystal structure of a bisporphyrin cleft molecule revealed that the head-to-head dimeric structure is directed by the intermolecular self-complementary hydrogen-bonding interactions of amide g...