Search

This paper presents a new method to diagnose rotor faults in operating three-phase induction motors under the presence of time-varying loads. The proposed diagnostic strategy relies on a combined analysis of the amplitude and phase spectra of the instantaneous active and reactive powers of the motor, and allows to discriminate the effects introduced by a rotor fault from the ones caused by an oscillating load torque, even when these phenomena occur simultaneously. A theoretical analysis carried out using a linearized model of the induction motor in a synchronous reference frame, complemented with several simulation and experimental results, confirms the validity of the proposed diagnostic approach. [ABSTRACT FROM AUTHOR]

This paper presents a new diagnostic technique for the diagnosis of open-circuit faults in matrix converters operating with an Optimum Alesina-Venturini modulation scheme. Compared to previous diagnostic techniques developed for matrix converters, the technique proposed in this paper has the major advantage of not requiring the installation of any additional sensors in the converter besides the ones already present for control purposes. Hence, it can be easily integrated into the control platform of the converter at no additional cost. In addition to the diagnostic approach, a new fault-tolerant switching strategy is also presented so that after the appearance of an open-circuit fault, the matrix converter can continue to run although with degraded performance, until a repair action can be taken. Several simulation and experimental results are presented, demonstrating the effectiveness and applicability of the developed techniques. [ABSTRACT FROM AUTHOR]

The monitoring of power converters is critical for obtaining systems with self-diagnostic capabilities and fault-tolerant features. This paper presents an analytical work concerning the operation of matrix converters (MCs) under the presence of open-circuit faults and discusses the applicability of a method for the diagnosis of this type of failures. The proposed method uses the absolute values of nine modulated error voltages for the continuous monitoring of the condition of the bidirectional switches of an MC. This method allows a fast detection and location of the faulty switches, independent of the modulation strategy of the converter, its voltage transfer ratio, output frequency, or type of load connected to it, both in steady-state and transient regimes. The theory, validated by simulation and experimental results, demonstrates the applicability of the proposed technique for the diagnosis of faults in MCs. [ABSTRACT FROM AUTHOR]