Search

Analog–digital converters (ADCs) are electronic circuits that convert continuous time signals into digital signals (binary data) for analyzing, estimation, and transmission. Transceivers use ADC in the baseband stage of receiver to convert the analog signals to digital form for further signal processing. At high-frequency applications, like millimeter wave applications, the ADC consumes more power due to the high sampling rate with respect to the increased bandwidth. In this article, a novel dynamic comparator is presented with delay and power analysis for the design. The expression is derived for all operational regions of the transistor. The new design is proposed for low-power consumption and reduced delay of the circuit. The novel design overcomes the drawbacks of the less operating frequency range, high latency, and more power dissipation of existing comparator designs. The proposed low-power dynamic comparator is simulated with 45 nm CMOS technology that provides total power dissipation of 33.92 µW, delay of 19.71 ps, and energy per conversion of 0.19 fJ/conv. with a supply voltage of 1 V. [ABSTRACT FROM AUTHOR]

Comparator is an essential building block in many digital circuits such as biometric authentication, data sorting, and exponents comparison in floating-point architectures among others. Quantum-dot Cellular Automata (QCA) is a latest nanotechnology that overcomes the drawbacks of Complementary Metal Oxide Semiconductor (CMOS) technology. In this paper, novel area optimized 2n-bit comparator architecture is proposed. To achieve the objective, 1-bit stack-type and 4-bit tree-based stack-type (TB-ST) comparators are proposed using QCA. Then, two tree-based architectures of 4-bit comparators are arranged in two layers to optimize the number of quantum cells and area of an 8-bit comparator. Thus, this design can be extended to any 2n-bit comparator. Simulation results of 4-bit and 8-bit comparators using QCADesigner 2.0.3 show that there is a significant improvement in the number of quantum cells and area occupancy. The proposed TB-ST 8-bit comparator uses 2.5 clock cycles and 622 quantum cells with area occupancy of 0.49 µm2 which is an improvement by 10.5% and 38%, respectively, compared to existing designs. Scaling it to a 32-bit comparator, the proposed architecture requires only 2675 quantum cells in an area of 2.05 µm2 with a delay of 3.5 clock cycles, indicating 9.35% and 28.8% improvements, respectively, demonstrating the merit of the proposed architecture. Besides, energy dissipation analysis of the proposed TB-ST 8-bit comparator is simulated on QCADesigner-E tool, indicating average energy dissipation reduction of 17.3% compared to existing works. [ABSTRACT FROM AUTHOR]