Search

Raw bit errors are common in NAND flash memory and will increase in the future. These errors reduce flash reliability and limit the lifetime of a flash memory device. We aim to improve flash reliability with a multitude of low-cost architectural techniques. We show that NAND flash memory reliability can be improved at low cost and with low performance overhead by deploying various architectural techniques that are aware of higher-level application behavior and underlying flash device characteristics. We analyze flash error characteristics and workload behavior through experimental characterization, and design new flash controller algorithms that use the insights gained from our analysis to improve flash reliability at a low cost. We investigate four directions through this approach. (1) We propose a new technique called WARM that improves flash reliability by 12.9 times by managing flash retention differently for write-hot data and write-cold data. (2) We propose a new framework that learns an online flash channel model for each chip and enables four new flash controller algorithms to improve flash reliability by up to 69.9%. (3) We identify three new error characteristics in 3D NAND through a comprehensive experimental characterization of real 3D NAND chips, and propose four new techniques that mitigate these new errors and improve 3D NAND reliability by up to 66.9%. (4) We propose a new technique called HeatWatch that improves 3D NAND reliability by 3.85 times by utilizing self-healing effect to mitigate retention errors in 3D NAND., Comment: Thesis, Carnegie Mellon University (2018)

Compared to planar (i.e., two-dimensional) NAND flash memory, 3D NAND flash memory uses a new flash cell design, and vertically stacks dozens of silicon layers in a single chip. This allows 3D NAND flash memory to increase storage density using a much less aggressive manufacturing process technology than planar NAND flash memory. The circuit-level and structural changes in 3D NAND flash memory significantly alter how different error sources affect the reliability of the memory. In this paper, through experimental characterization of real, state-of-the-art 3D NAND flash memory chips, we find that 3D NAND flash memory exhibits three new error sources that were not previously observed in planar NAND flash memory: (1) layer-to-layer process variation, where the average error rate of each 3D-stacked layer in a chip is significantly different; (2) early retention loss, a new phenomenon where the number of errors due to charge leakage increases quickly within several hours after programming; and (3) retention interference, a new phenomenon where the rate at which charge leaks from a flash cell is dependent on the data value stored in the neighboring cell. Based on our experimental results, we develop new analytical models of layer-to-layer process variation and retention loss in 3D NAND flash memory. Motivated by our new findings and models, we develop four new techniques to mitigate process variation and early retention loss in 3D NAND flash memory. These four techniques are complementary, and can be combined together to significantly improve flash memory reliability. Compared to a state-of-the-art baseline, our techniques, when combined, improve flash memory lifetime by 1.85x. Alternatively, if a NAND flash vendor wants to keep the lifetime of the 3D NAND flash memory device constant, our techniques reduce the storage overhead required to hold error correction information by 78.9%., Comment: presented at SIGMETRICS 2018

This paper summarizes our work on experimentally analyzing, exploiting, and addressing vulnerabilities in multi-level cell NAND flash memory programming, which was published in the industrial session of HPCA 2017, and examines the work's significance and future potential. Modern NAND flash memory chips use multi-level cells (MLC), which store two bits of data in each cell, to improve chip density. As MLC NAND flash memory scaled down to smaller manufacturing process technologies, manufacturers adopted a two-step programming method to improve reliability. In two-step programming, the two bits of a multi-level cell are programmed using two separate steps, in order to minimize the amount of cell-to-cell program interference induced on neighboring flash cells. In this work, we demonstrate that two-step programming exposes new reliability and security vulnerabilities in state-of-the-art MLC NAND flash memory. We experimentally characterize contemporary 1X-nm (i.e., 15--19nm) flash memory chips, and find that a partially-programmed flash cell (i.e., a cell where the second programming step has not yet been performed) is much more vulnerable to cell-to-cell interference and read disturb than a fully-programmed cell. We show that it is possible to exploit these vulnerabilities on solid-state drives (SSDs) to alter the partially-programmed data, causing (potentially malicious) data corruption. Based on our observations, we propose several new mechanisms that eliminate or mitigate these vulnerabilities in partially-programmed cells, and at the same time increase flash memory lifetime by 16%.

This paper summarizes our work on experimentally characterizing, mitigating, and recovering read disturb errors in multi-level cell (MLC) NAND flash memory, which was published in DSN 2015, and examines the work's significance and future potential. NAND flash memory reliability continues to degrade as the memory is scaled down and more bits are programmed per cell. A key contributor to this reduced reliability is read disturb, where a read to one row of cells impacts the threshold voltages of unread flash cells in different rows of the same block. For the first time in open literature, this work experimentally characterizes read disturb errors on state-of-the-art 2Y-nm (i.e., 20-24 nm) MLC NAND flash memory chips. Our findings (1) correlate the magnitude of threshold voltage shifts with read operation counts, (2) demonstrate how program/erase cycle count and retention age affect the read-disturb-induced error rate, and (3) identify that lowering pass-through voltage levels reduces the impact of read disturb and extend flash lifetime. Particularly, we find that the probability of read disturb errors increases with both higher wear-out and higher pass-through voltage levels. We leverage these findings to develop two new techniques. The first technique mitigates read disturb errors by dynamically tuning the pass-through voltage on a per-block basis. Using real workload traces, our evaluations show that this technique increases flash memory endurance by an average of 21%. The second technique recovers from previously-uncorrectable flash errors by identifying and probabilistically correcting cells susceptible to read disturb errors. Our evaluations show that this recovery technique reduces the raw bit error rate by 36%.

In existing systems, to perform any bulk data movement operation (copy or initialization), the data has to first be read into the on-chip processor, all the way into the L1 cache, and the result of the operation must be written back to main memory. This is despite the fact that these operations do not involve any actual computation. RowClone exploits the organization and operation of commodity DRAM to perform these operations completely inside DRAM using two mechanisms. The first mechanism, Fast Parallel Mode, copies data between two rows inside the same DRAM subarray by issuing back-to-back activate commands to the source and the destination row. The second mechanism, Pipelined Serial Mode, transfers cache lines between two banks using the shared internal bus. RowClone significantly reduces the raw latency and energy consumption of bulk data copy and initialization. This reduction directly translates to improvement in performance and energy efficiency of systems running copy or initialization-intensive workloads, Comment: arXiv admin note: text overlap with arXiv:1605.06483

This paper summarizes our work on experimentally characterizing, mitigating, and recovering data retention errors in multi-level cell (MLC) NAND flash memory, which was published in HPCA 2015, and examines the work's significance and future potential. Retention errors, caused by charge leakage over time, are the dominant source of flash memory errors. Understanding, characterizing, and reducing retention errors can significantly improve NAND flash memory reliability and endurance. In this work, we first characterize, with real 2Y-nm MLC NAND flash chips, how the threshold voltage distribution of flash memory changes with different retention ages -- the length of time since a flash cell was programmed. We observe from our characterization results that 1) the optimal read reference voltage of a flash cell, using which the data can be read with the lowest raw bit error rate (RBER), systematically changes with its retention age, and 2) different regions of flash memory can have different retention ages, and hence different optimal read reference voltages. Based on our findings, we propose two new techniques. First, Retention Optimized Reading (ROR) adaptively learns and applies the optimal read reference voltage for each flash memory block online. The key idea of ROR is to periodically learn a tight upper bound of the optimal read reference voltage, and from there approach the optimal read reference voltage. Our evaluations show that ROR can extend flash memory lifetime by 64% and reduce average error correction latency by 10.1%. Second, Retention Failure Recovery (RFR) recovers data with uncorrectable errors offline by identifying and probabilistically correcting flash cells with retention errors. Our evaluation shows that RFR essentially doubles the error correction capability.

NAND flash memory is ubiquitous in everyday life today because its capacity has continuously increased and cost has continuously decreased over decades. This positive growth is a result of two key trends: (1) effective process technology scaling; and (2) multi-level (e.g., MLC, TLC) cell data coding. Unfortunately, the reliability of raw data stored in flash memory has also continued to become more difficult to ensure, because these two trends lead to (1) fewer electrons in the flash memory cell floating gate to represent the data; and (2) larger cell-to-cell interference and disturbance effects. Without mitigation, worsening reliability can reduce the lifetime of NAND flash memory. As a result, flash memory controllers in solid-state drives (SSDs) have become much more sophisticated: they incorporate many effective techniques to ensure the correct interpretation of noisy data stored in flash memory cells. In this chapter, we review recent advances in SSD error characterization, mitigation, and data recovery techniques for reliability and lifetime improvement. We provide rigorous experimental data from state-of-the-art MLC and TLC NAND flash devices on various types of flash memory errors, to motivate the need for such techniques. Based on the understanding developed by the experimental characterization, we describe several mitigation and recovery techniques, including (1) cell-tocell interference mitigation; (2) optimal multi-level cell sensing; (3) error correction using state-of-the-art algorithms and methods; and (4) data recovery when error correction fails. We quantify the reliability improvement provided by each of these techniques. Looking forward, we briefly discuss how flash memory and these techniques could evolve into the future., Comment: arXiv admin note: substantial text overlap with arXiv:1706.08642

Modern DRAM modules are often equipped with hardware error correction capabilities, especially for DRAM deployed in large-scale data centers, as process technology scaling has increased the susceptibility of these devices to errors. To provide fast error detection and correction, error-correcting codes (ECC) are placed on an additional DRAM chip in a DRAM module. This additional chip expands the raw capacity of a DRAM module by 12.5%, but the applications are unable to use any of this extra capacity, as it is used exclusively to provide reliability for all data. In reality, there are a number of applications that do not need such strong reliability for all their data regions (e.g., some user batch jobs executing on a public cloud), and can instead benefit from using additional DRAM capacity to store extra data. Our goal in this work is to provide the additional capacity within an ECC DRAM module to applications when they do not need the high reliability of error correction. In this paper, we propose Capacity- and Reliability-Adaptive Memory (CREAM), a hardware mechanism that adapts error correcting DRAM modules to offer multiple levels of error protection, and provides the capacity saved from using weaker protection to applications. For regions of memory that do not require strong error correction, we either provide no ECC protection or provide error detection using multibit parity. We evaluate several layouts for arranging the data within ECC DRAM in these reduced-protection modes, taking into account the various trade-offs exposed from exploiting the extra chip. Our experiments show that the increased capacity provided by CREAM improves performance by 23.0% for a memory caching workload, and by 37.3% for a commercial web search workload executing production query traces. In addition, CREAM can increase bank-level parallelism within DRAM, offering further performance improvements.

NAND flash memory is ubiquitous in everyday life today because its capacity has continuously increased and cost has continuously decreased over decades. This positive growth is a result of two key trends: (1) effective process technology scaling, and (2) multi-level (e.g., MLC, TLC) cell data coding. Unfortunately, the reliability of raw data stored in flash memory has also continued to become more difficult to ensure, because these two trends lead to (1) fewer electrons in the flash memory cell (floating gate) to represent the data and (2) larger cell-to-cell interference and disturbance effects. Without mitigation, worsening reliability can reduce the lifetime of NAND flash memory. As a result, flash memory controllers in solid-state drives (SSDs) have become much more sophisticated: they incorporate many effective techniques to ensure the correct interpretation of noisy data stored in flash memory cells. In this article, we review recent advances in SSD error characterization, mitigation, and data recovery techniques for reliability and lifetime improvement. We provide rigorous experimental data from state-of-the-art MLC and TLC NAND flash devices on various types of flash memory errors, to motivate the need for such techniques. Based on the understanding developed by the experimental characterization, we describe several mitigation and recovery techniques, including (1) cell-to-cell interference mitigation, (2) optimal multi-level cell sensing, (3) error correction using state-of-the-art algorithms and methods, and (4) data recovery when error correction fails. We quantify the reliability improvement provided by each of these techniques. Looking forward, we briefly discuss how flash memory and these techniques could evolve into the future.