Search

Reconstruction of bone defects has long been a major clinical challenge. Limited by the various shortcomings of conventional treatment like autologous bone grafting and inorganic substitutes, the development of novel bone repairing strategies is on top priority. Injectable biomimetic hydrogels that deliver stem cells and growth factors in a minimally invasive manner can effectively promote bone regeneration and thus represent a promising alternative. Therefore, in this study, we designed and constructed an injectable nanocomposite hydrogel co-loaded with Laponite (Lap) and vascular endothelial growth factor (VEGF) through a simplified and convenient scheme of physical co-mixing (G@Lap/VEGF). The introduced Lap not only optimized the injectability of GelMA by the electrostatic force between the nanoparticles, but also significantly delayed the release of VEGF-A. In addition, Lap promoted high expression of osteogenic biomarkers in mesenchymal stem cells (MSCs) and enhanced the matrix mineralization. Besides, VEGF-A exerted chemotactic effects recruiting endothelial progenitor cells (EPCs) and inducing neovascularization. Histological and micro-CT results demonstrated that the critical-sized calvarial bone defect lesions in the SD rats after treated with G@Lap/VEGF exhibited significant in vivo bone repairing. In conclusion, the injectable G@Lap/VEGF nanocomposite hydrogel constructed in our study is highly promising for clinical transformation and applications, providing a convenient and simplified scheme for clinical bone repairing, and contributing to the further development of the injectable biomimetic hydrogels., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Lequn Shan reports financial support was provided by Key Research and Development Program of Shaanxi Province. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

To develop an optimized controlled-release system based on temperature-sensitive poly(N-isopropylacrylamide) (PNIPAAm) nanofibers, we prepared three types of temperature-controlled preservative films. These films were composed of PNIPAAm, polyvinyl alcohol (PVA), polylactic acid (PLA), and lemon essential oil (LEO), and were fabricated using uniaxial, coaxial, and layered spinning techniques. The nanofiber films obtained by layered spinning exhibited a sandwich structure, demonstrating superior physical barrier properties, mechanical strength, and thermal resistance. Fourier-transform infrared spectroscopy confirmed the hydrogen bonding interaction between the polylactic acid/lemon essential oil and PNIPAAm layers. LEO release tests showed that PNIPAAm functions as a temperature-responsive switch, suppressing LEO release below and promoting it above the critical solution temperature. After a sustained release at 40 °C for 5 days, the layered film maintained significant antibacterial activity, effectively extending the shelf life of blackberries to 4 days. Considering its physical barrier, mechanical, and sustained-release properties, the layered film derived from PNIPAAm shows great potential as an intelligent temperature-controlled cling film to effectively extend the freshness of perishable products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sustained release microspheres loaded with goserelin are regarded as a promising candidate for treating prostate cancer and other sex hormone diseases. However, their widespread adoption has been hindered by issues such as wide particle size distribution and unstable release characteristics. To address these challenges, we employed a combination of the solid-in-oil-in-water microspheres preparation approach (S/O/W) and innovative premix membrane emulsification technology and deeply investigated the effects of four key parameters on the loaded performance of microspheres and the microscopic mechanisms behind them. With this approach, we successfully produced goserelin-loaded sustained release microspheres of narrow particle size distribution (Span 0.642), remarkable encapsulation efficiency (DL = 4.23 %, EE = 93.98 %), low initial burst release (about 0.50 % within 2 h), and compatibility with small injection needles (23-G, inner diameter 0.33 mm, outer diameter 0.64 mm, maximal force 59 N). In the animal model(administered dose, 2.4 mg·Kg -1 ), goserelin long-acting sustained release microspheres sustained release for over 32 days, maintaining effective concentrations above 2 ng·mL -1 , and effectively reduced serum testosterone concentrations to castration levels (<1.0 ng·mL -1 ) by day 4, maintaining this inhibition for up to 21 days, exhibiting comparable efficacy to the positive control group. In vivo release kinetics analysis revealed that goserelin-loaded sustained release microspheres exhibited a release pattern dominated by diffusion with corrosion assistance in vivo. In summary, the systematic and comprehensive evaluation of uniform-sized goserelin-loaded sustained release microspheres has highlighted their excellent translational potential, and the study herein may provide new strategies and ideas for the development of microsphere dosage forms., Competing Interests: Declaration of Competing Interest The authors declare that they have no competing financial interests or personal relationships that may have influenced the work reported in this study., (Copyright © 2024. Published by Elsevier B.V.)

Implant-associated bacterial infections are a primary cause of complications in orthopedic implants, and localized drug delivery represents an effective mitigation strategy. Drawing inspiration from the morphology of desiccated soil, our group has developed an advanced drug-delivery system augmented onto titanium (Ti) plates. This system integrates zinc oxide (ZnO) nanorod arrays with a vancomycin drug layer along with a protective Poly(lactic-co-glycolic acid) (PLGA) coating. The binding between the ZnO nanorods and the drug results in attached drug blocks, isolated by desiccation-like cracks, which are then encapsulated by PLGA to enable sustained drug release. Additionally, the release of zinc ions and the generation of reactive oxygen species (ROS) from the ZnO nanorods enhance the antibacterial efficacy. The antibacterial properties of ZnO nanorod-drug-PLGA system have been validated through both in vitro and in vivo studies. Comprehensive investigations were conducted on the impact of bacterial infections on bone defect regeneration and the role of this drug-delivery system in the healing process. Furthermore, the local immune response was analyzed and the immunomodulatory function of the system was demonstrated. Overall, the findings underscore the superior performance of the ZnO nanorod-drug-PLGA system as an efficient and safe approach to combat implant-associated bacterial infections. STATEMENT OF SIGNIFICANCE: Implant-associated bacterial infections pose a significant clinical challenge, particularly in orthopedic procedures. To address this, we developed an innovative ZnO nanorod-drug-PLGA system for local antibiotic delivery on conventional titanium implants. This system is biodegradable and features a unique desiccation-like structure that enables sustained drug release, along with the active substances released from the ZnO nanorods. In a rat calvarial defect model challenged with S. aureus, our system demonstrated remarkable antibacterial efficacy, significantly enhanced bone defect regeneration, and exhibited local immunomodulatory effects that support both infection control and osteogenesis. These breakthrough findings highlight the substantial clinical potential of this novel drug delivery system and introduce a transformative coating strategy to enhance the functionality of traditional metallic biomaterials., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: D. Zhu is a scientific advisor of Summit Life Science Research Institute., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

This study presents an innovative approach to develop and characterize an alginate sponge containing κ-carrageenan (κ-CRG) beads loaded with curcumin. The beads were fabricated using varying concentrations of κ-CRG, and their properties were extensively evaluated using inverted phase-contrast microscopy, Scanning Electron Microscopy (SEM), FTIR, swelling behavior, mass distribution, encapsulation efficiency, in vitro drug release and kinetics of drug release. Beads formulated with specific concentrations of κ-CRG that exhibited optimal performance were then integrated into an alginate sponge matrix, which underwent similar comprehensive testing procedures as the individual beads. The characterized beads displayed a spherical morphology, a notable swelling degree of approximately 146 %, excellent mass uniformity, encapsulation efficiencies higher than 90 % and drug release rate exceeding 70 %. Moreover, the alginate sponge formulation demonstrated a satisfactory drug release profile of 67.9 ± 0.6 %. In terms of drug release kinetics, the Higuchi model was the most effective in explaining the release of curcumin from beads and sponge. These findings underscore the potential of both the beads and the sponge as effective vehicles for the controlled delivery of curcumin, positioning them as promising candidates for pharmaceutical applications across various fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Oxidative stress has long been known as a pathogenic factor of ulcerative colitis. Superoxide dismutase (SOD) has been demonstrated to mitigate gut mucosal injury via combating oxidative stress. Herein, we developed SOD-loaded multivesicular liposomes (S-MVLs) as sustained-release depot for ulcerative colitis treatment. S-MVLs were spherical honeycomb-like particles with average particle size of 27.3 ± 5.4 μm and encapsulating efficiency of 78.7 ± 2.6 %. Moreover, the two-phase release profiles of SOD from S-MVLs were exhibited, that was, the burst release phase within 4 h and the sustained-release phase within 96 h. After intraperitoneally injecting S-MVLs, in situ retention time of SOD at bowel cavity extended by 4-fold in comparison with SOD solution. In vitro cells experiment showed that S-MVLs had the protective effect on LPS-treated RAW 264.7 cells via scavenging ROS and inhibiting pro-inflammatory cytokines production. S-MVLs ameliorated the body weight loss, DAI score and the colon shortening of colitis mice. Meanwhile, the colonic morphology and the epithelial barrier of colitis mice were effectively recovered after S-MVLs treatment. The therapeutic mechanism might be associated with polymerizing M1 macrophages to M2 phenotypes and alleviating oxidative stress. Collectively, multivesicular liposomes might be a promising sustained-release depot of SOD for ulcerative colitis treatments., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Helin Xu reports financial support was provided by Wenzhou Medical University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2024 Elsevier B.V. All rights reserved.)

Deep infection is the second most common complication of arthroplasty following loosening of the implant. Antibiotic-loaded bone cements (ALBCs) and high concentrations of systemic broad-spectrum antibiotics are commonly used to prevent infections following injury and surgery. However, clinical data fails to show that ALBCs are effective against deep infection, and negative side effects can result following prolonged administration of antibiotics. Additionally, the rise of multidrug resistant (MDR) bacteria provides an urgent need for alternatives to broad-spectrum antibiotics. Phage therapy, or the use of bacteriophages (viruses that infect bacteria) to target pathogenic bacteria, might offer a safe alternative to combat MDR bacteria. Application of phage therapy in the setting of deep infections requires formulation strategies that would stabilize bacteriophage against chemical and thermal stress during bone-cement polymerization, that maintain bacteriophage activity for weeks or months at physiological temperatures, and that allow for sustained release of phage to combat slow-growing, persistent bacteria. Here, we demonstrate the formulation of three phages that target diverse bacterial pathogens, which includes spray-drying of the particles for enhanced thermal stability at 37 °C and above. Additionally, we use atomic layer deposition (ALD) to coat spray-dried powders with alumina to allow for delayed release of phage from the dry formulations, and potentially protect phage against chemical damage during bone cement polymerization. Together, these findings present a strategy to formulate phages that possess thermal stability and sustained release properties for use in deep infections., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The University of Colorado has licensed intellectual property related to thermal stabilization and ALD coatings of vaccines to VitriVax, Inc., a company in which the Regents of the University of Colorado and TWR hold equity., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

To improve drug bioavailability, eye drops can be replaced by drug-eluting contact lenses. However, issues of drug leaching from lenses during manufacture and storage, and sterilization, currently limit their commercial application. To address the issues, stimuli-(lysozyme)-sensitive chitosan nanoparticles were developed to provide controlled ocular drug delivery. Nanoparticles were prepared by ionic gelation and characterized by TEM, X-ray diffraction, DSC, and FTIR. In the flux study, conventional-soaked contact lenses (SM-TM-CL) showed high-burst release, while with direct drug-only laden contact lenses (DL-TM-CL) the drug was lost during extraction and sterilization, as well as having poor swelling and optical properties. The nanoparticle-laden contact lenses (TM-Cht-NPs) showed controlled release of timolol for 120 h in the presence of lysozyme, with acceptable opto-physical properties. In the shelf-life study, the TM-Cht-NPs contact lenses showed no leaching or alteration in the drug release pattern. In animal studies, the TM-NPs-CL lenses gave a high drug concentration in rabbit tear fluid (mean = 11.01 µg/mL for 56 h) and helped maintain a low intraocular pressure for 120 h. In conclusion, the chitosan nanoparticle-laden contact lenses demonstrated the potential application to treat glaucoma with acceptable opto-physical properties and addressed the issues of drug-leaching during sterilization and storage., (© 2024. Controlled Release Society.)

Hydrogels are notable for their outstanding absorbent qualities, satisfactory compatibility with biological systems, ability to degrade, and inherent safety, all of which contribute to their high demand in the field of biomedicine. This study focuses on the fabrication of hydrogels using environmentally friendly cellulosic material. Cellulose hydrogel beads were prepared by physical cross-linking in a NaOH/urea medium. Furthermore, nano polydopamine was integrated into the hydrogel matrix as functional polymers and α-mangostin was employed as an active pharmaceutical ingredient. The physicochemical properties were comprehensively analyzed using Fourier-transform infrared spectrometer, 13 C cross-polarization/magic angle spinning nuclear magnetic resonance, thermogravimetric analysis, and scanning electron microscope. The drug delivery properties, including water content, swelling ratio, and drug release profiles, were evaluated. In vitro cytotoxicity against MC3T3-E1 cells was assessed using sulforhodamine B staining. All test hydrogels exhibited inhibitory activity against the growth of MC3T3-E1 cells. These results indicated the potential use of these hydrogels as a drug delivery carrier for α-mangostin in the treatment of ankylosing spondylitis., (© 2024 Wiley Periodicals LLC.)

Gelatin (GEL), pectin (PEC), carboxymethyl cellulose (CMC), and whey protein isolate (WPI) were employed to formulate hydrogels for stabilizing N-Acetylneuraminic Acid (NeuAc). GEL/WPI-NeuAc hydrogels, irrespective of the ratio, exhibited a flexible and smooth surface with a continuous three-dimensional network structure internally. Porosity of the three types of hydrogels increased from 3.69% to 86.92% (GEL/WPI), 41.67% (PEC/WPI), and 87.62% (CMC/WPI), rendering them suitable as carriers for NeuAc encapsulation. The dynamic swelling behavior of all hydrogels followed Schott's second-order kinetics model. The degradation performance of GEL, PEC, and CMC/WPI-NeuAc hydrogels was optimal at a 5: 5 ratio, with degradation rates of 80.39 ± 1.26%, 82.38 ± 1.96%, and 81.39 ± 1.57%, respectively. GEL, PEC, CMC/WPI-NeuAc hydrogels demonstrated decreased release rates of 44.56%, 31.04%, and 41.26%, respectively, compared to free NeuAc, post gastric digestion. The present investigation suggests the potential of GEL/WPI hydrogels as effective carriers for delivering NeuAc encapsulation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Hollow hydrogels, characterized by their three-dimensional networks akin to biological tissues, are extensively utilized in artificial blood vessels, drug delivery, and nerve conduits due to their superior biocompatibility and fluid-transportation capacity. Nonetheless, the fabrication of hollow hydrogels presents significant challenges, including intricate steps, costly equipment, and structural instability. Consequently, refining the preparation techniques for hollow hydrogels remains paramount to surmounting the limitations of conventional methods. This research introduces an innovative approach that markedly diverges from traditional techniques, offering notable convenience and efficiency in the creation of hollow hydrogel structures. The central novelty of this method lies in employing laser light to induce an in situ photothermal effect, leading to the formation of hollow configurations. This laser-driven transformation of solid hydrogels into hollow structures addresses numerous shortcomings associated with traditional methods. For instance, conventional chemical approaches often necessitate several days to yield hollow hydrogels, and the resultant structures tend to be fragile and susceptible to damage under external pressure. In contrast, the laser-assisted technique facilitates the formation of hollow structures within 240 s, significantly outpacing traditional methods. To achieve controlled drug release, silk fibroin was integrated into the wall of the hollow hydrogels, enabling modulation of wall permeability and directing the drug release process.

Long-acting parenteral drug products are a popular choice for therapeutic areas requiring long term treatment. These products range from dispersed systems such as drug suspensions and polymeric microspheres to in situ forming polymeric implants. The lack of reliable drug release testing methods for these drug products not only impedes the development of new drug products but also affects generic drug development. Current release methods suffer from a range of problems such as high variability, poor reproducibility, poor discriminatory ability, lack of depot-like structure formation (that could mimic the in vivo situation). Moreover, shorter duration (less than a week) of release renders them unsuitable for in vitro-in vivo correlations (IVIVCs). To overcome these issues, novel adapters were developed for both USP-type-II & IV apparatus. These adapters were validated and assessed using the long-acting injectable (LAI) suspension drug product Depo Provera 150® as well as its Q1/Q2 equivalents. For USP-type-IV apparatus, two open adapter designs (conical and ellipsoidal shaped cavity with volume capacities of 50 µl and 1 ml, respectively) were developed. A closed conical adapter design with a volume capacity of 0.05 ml was developed for USP apparatus type-II. All three novel adapter designs effectively retained the suspensions, achieved release durations of 3-6 weeks with good reproducibility, minimal variability (RSD≤5%) and had good discriminatory ability. Based on this, the adapter-based dissolution methods were deemed suitable for IVIVC development of long-acting injectables. A successful Level A IVIVC was developed for Depo SubQ Provera 104® and its Q1Q2 equivalents using USP apparatus type IV with a conical adapter design. The closed adapter design for apparatus type-II was also investigated for suitability with risperidone in situ forming implants. The adapter was able to securely retain and maintain the shape of the in situ forming implants and resulted in release profiles of up to one month with good discriminatory ability and low standard error (RSD≤5%). These novel adapters hold promise of wide use for in vitro release testing of different long-acting parenteral drug products., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Nileshkumar Malavia, Quanying Bao, Diane J Burgess has patent pending to University of Connecticut. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.]., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A series of hybrid hydrogels of poly(ethylene glycol) (PEG) were synthesized using gelatin as a crosslinker and investigated for controlled delivery of the first-generation cephalosporin antibiotic, Cefazedone sodium (CFD). A commercially available 4-arm-PEG-OH was first modified to obtain four-arm-PEG-succinimidyl glutarate (4-arm-PEG-SG), which formed the gelatin-PEG composite hydrogels (S n N m ) through crosslinking with gelatin. To regulate the drug delivery, S n N m hydrogels with various solid contents and crosslinking degrees were prepared. The effect of solid contents and crosslinking degrees on the thermal, mechanical, swelling, degradation, and drug release properties of the hydrogels were intensively investigated. The results revealed that increasing the crosslinking degree and solid content of S n N m could not only enhance the thermal stability, swelling ratio (SR), and compression resistance capacity of S n N m but also prolong the degradation and drug release times. The release kinetics of the S n N m hydrogels were found to follow the first-order model, suggesting that the transport rate of CFD within the matrix of hydrogels is proportional to the concentration of the drug where it is located. Specifically, S 1 N 1 -III showed 90% mass loss after 60 h of degradation and a sustained release duration of 72 h. The cytotoxicity assay using the MTT method revealed that cell viability rates of S 1 N 1 were higher than 95%, indicating excellent cytocompatibility. This study offers new insights and methodologies for the development of hydrogels as biomedical composite materials.

Stimulus-responsive systems allowing for the controlled release of drugs [...].

A major risk associated with surgery, including bone tissue procedures, is surgical site infection. It is one of the most common as well as the most serious complications of modern surgery. A helpful countermeasure against infection is antibiotic therapy. In the present study, a methodology has been developed to obtain clindamycin-modified polymer-ceramic hybrid composite coatings for potential use in bone regenerative therapy. The coatings were prepared using a UV-light photocrosslinking method, and the drug was bound to a polymeric and/or ceramic phase. The sorption capacity of the materials in PBS was evaluated by determining the swelling ability and equilibrium swelling. The influence of the presence of ceramics on the amount of liquid bound was demonstrated. The results were correlated with the rate of drug release measured by high-performance liquid chromatography (HPLC). Coatings with higher sorption capacity released the drug more rapidly. Scanning electron microscopy (SEM) imaging was carried out comparing the surface area of the coatings before and after immersion in PBS, and the proportions of the various elements were also determined using the EDS technique. Changes in surface waviness were observed, and chlorine ions were also determined in the samples before incubation. This proves the presence of the drug in the material. The in vitro tests conducted indicated the release of the drug from the biomaterials. The antimicrobial efficacy of the coatings was tested against Staphylococcus aureus . The most promising material was tested for cytocompatibility (MTT reduction assay) against the mouse fibroblast cell line L929 as well as human osteoblast cells hFOB. It was demonstrated that the coating did not exhibit cytotoxicity. Overall, the results signaled the potential use of the developed polymer-ceramic hybrid coatings as drug carriers for the controlled delivery of clindamycin in bone applications. The studies conducted were the basis for directing samples for further in vivo experiments determining clinical efficacy.

Azo switches are widely employed as essential components in light-responsive systems. Here, we develop an azo-fluorescent switch that is visible light-responsive and its light-responsive processes can be monitored using fluorescence imaging. Visible light irradiation promotes isomerization, accompanied by changes in fluorescence that enable the process to be monitored through fluorescence imaging. Furthermore, we document that the nanocavity size of liposome encapsulated nanoparticles containing azo changes in the isomerization process and show that this change enables construction of a light-responsive nanoplatform for optically controlled release of antimycotics. Also, natural light activation of nanoparticles of the switch loaded with an antimycotic agent causes death of Rhizoctonia solani. The results show that these nanoparticles can double the holding period in comparison to small molecule antimycotics. The strategy used to design the imaging-guided light-controlled nano-antimycotic release system can be applicable to protocols for controlled delivery of a wide variety of drugs., (© 2024. The Author(s).)

Nanocarriers for drugs have been investigated for decades, yet it is still challenging to achieve sustained release from nanomaterials due to drug loading inefficiency and burst release. In this study, we developed novel functional carbon dots (CDs) and investigated the therapeutic efficacy by studying the loading efficiency and release behavior of the anticancer drug doxorubicin (DOX). CDs were successfully synthesized using a one-step pyrolysis method with varying concentrations of citric acid (CA) and thiourea (TU). Functional groups, morphology, particle size, and zeta potential of synthesized CT-CDs and DOX loaded CT-CDs were investigated by UV-visible, Fluorescence, dynamic light scattering, Zeta Potential measurements, FTIR, and transmission electron microscopy. The zeta potential data revealed DOX loading onto CT-CDs by charge difference, i.e. -24.6 ± 0.44 mV (CT-CDs) and 20.57 ± 0.55 mV (DOX-CT-CDs). DOX was loaded on CDs with a loading efficiency of 88.67 ± 0.36%. In vitro drug release studies confirmed pH-dependent biphasic drug release, with an initial burst effect and sustained release of DOX was found to be 21.42 ± 0.28% (pH 5), 13.30 ± 0.03% (pH 7.4), and 13.95 ± 0.18% (pH 9) even after 144 h at 37 °C. The CT-CDs were non-toxic and biocompatible with L929 Fibroblasts cells. The cytotoxic effect of DOX-CT-CDs showed a concentration-dependent effect after 48 h with Glioblastoma U251 cells. Flow cytometry was used to examine the cellular uptake of CT-CDs and DOX-CT-CDs in L929 and U251 cells. It was observed that the maximum CT-CDs uptake was around 75% at the end of 24 h. This study showed that the synthesized fluorescent CT-CDs demonstrated a high drug loading capacity, pH-dependent sustained release of DOX, and high cellular uptake by mammalian cells. We believe this work provides practical and biocompatible CDs for chemotherapeutic drug delivery that can be applied to other drugs for certain therapeutic aims., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Herein, we reported novel docetaxel-decorated solid lipid nanoparticle (DCT-SLN)-loaded dual thermoreversible system (DCT-DRTS) for intramuscular administration with reduced burst effect, sustained release and improved antitumor efficacy. The optimized DCT-DRTs was subjected to in-vitro and in-vivo analyses. Antitumor evaluation of the DCT-DRTS was executed and compared with DCT-hydrogel, and DCT-suspension trailed by the histopathological and immune-histochemical analyses. The DCT-SLN gave a mean particle size of 157 nm and entrapment efficiency of 93 %. It was a solid at room temperature, and changed to liquid at physiological temperature due to its melting point of about 32 °C. Unlikely, poloxamer mixture remained liquefied at 25-27 °C, however converted to gel at physiological temperature. This behavior demonstrated opposed reversible property of the DCT-SLN and poloxamer hydrogel in DCT-DRTS system, making it ideal for intramuscular administration and quick gelation inside the body. The DCT-DRTS sustained the drugs release and unlike DCT-hydrogel, the preliminary plasma concentration of DCT-DRTS was significantly reduced, overcoming the burst release. A meaningfully enhanced antitumor efficacy and improved survival rate was observed from DCT-DRTS in tumor cell xenograft athymic nude mice. Additionally, increased apoptotic and reduced proliferation markers were observed in DCT-DRTS treated tumor masses. It was concluded that DCT-DRTS may be a suitable choice for intramuscular administration of DCT with sustained release, improved bioavailability, reduced toxicity and enhanced antitumor effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In addition to the solubilization of poorly water-soluble, highly lipophilic drugs, lipid nanoemulsions bear potential for drug targeting approaches. This requires that the drug remains within the emulsion droplets until they reach the site of action. Since drug release is rather controlled by the lipophilicity of the drug than by the formulation, this study systematically investigated the influence of drug lipophilicity on the course of drug transfer in (physiological) acceptor media. An increase in drug lipophilicity, according to ClogD/P values, was achieved by the formation of lipophilic prodrugs of 5-phenylanthranilic acid - a potential pathoblocker. The range of substances was supplemented by orlistat, lumefantrine and cholesteryl acetate as model drugs. Drug transfer from supercooled trimyristin nanodroplets was determined via differential scanning calorimetry by monitoring their onset crystallization temperature, which decreases linearly with increasing drug content. Release of the model (pro)drugs ranged from burst to hardly any release in the order of the ClogD/P values. Except for cholesteryl acetate, the results were in line with the lipophilicity of the model (pro)drugs estimated by their retention times on a reversed-phase HPLC column under isocratic conditions. An approximate prediction of drug release kinetics was, thus, possible by logP calculations and, to a limited extent, also by reversed-phase HPLC. A further finding was the increased drug loading capacity of the lipid nanoemulsion for lipophilic prodrugs, if the structural changes of the parent compound were accompanied by a lower melting point., Competing Interests: Declaration of competing interest None., (Copyright © 2024. Published by Elsevier B.V.)

In this study, a novel bio-composite material that allow sustained release of plant derived antimicrobial compound was developed for the biomedical applications to prevent the infections caused by microorganisms resistant to commercial antimicrobials agents. With this aim, bacterial cellulose (BC)-p(HEMA) nanocomposite film that imprinted with eugenol (EU) via metal chelated monomer, MAH was prepared. Firstly, characterization studies were utilized by FTIR, SEM and BET analysis. Then antimicrobial assays, drug release studies and in vitro cytotoxicity test were performed. A significant antimicrobial effect against both Gram (+) Staphylococcus aureus and Gram (-) Escherichia coli bacteria and a yeast Candida albicans were observed even in low exposure time periods. When antimicrobial effect of EU compared with commercially used agents, both antifungal and antibacterial activity of EU were found to be higher. Then, sustained drug release studies showed that approximately 55% of EU was released up to 50 h. This result proved the achievement of the molecular imprinting for an immobilization of molecules that desired to release on an area in a long-time interval. Finally, the in vitro cytotoxicity experiment performed with the mouse L929 cell line determined that the synthesized EU-imprinted BC nanocomposite was biocompatible.

The deterioration in the structure of thyroid hormones causes many thyroid-related disorders, which leads to a negative effect on the quality of life, as well as the change in metabolic rate. For the treatment of thyroid disorders, daily use of levothyroxine-based medication is essential. In the study, it is aimed to develop a polymeric nanocarrier that can provide controlled drug release of levothyroxine. In this respect, the p(HEMA-MAGA) nanopolymer was synthesized and then characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Zeta size analysis. The specific surface area of the nanopolymer was calculated as 587.68 m 2 /g. The pH, temperature, concentration, and time parameters were determined for levothyroxine binding to p(HEMA-MAGA) and optimum binding was determined as pH 7.4, 25 °C, 25 µg/mL concentration, and 30 min adsorption time. As a result of the release performed at pH 7.4, a release profile was observed which increased for the first 3 days and continued for 14 days. According to the results of MTT cell viability analysis, it was determined that the p(HEMA-MAGA) nanopolymeric carrier system had no cytotoxic effect. This developed polymer-based nanocarrier system is suitable for long-term and controlled release of levothyroxine. This is a unique and novel study in terms of developing poly hydroxyethylmethacrylate-co-methacryloyl glutamic acid-based polymeric nanoparticles for levothyroxine release.

Hydrophilic and hydrophobic modified nanomicelles might be more conducive to passage of the gastrointestinal barrier than walnut peptide (WP). In this study, a novel double modified starch polymer, SB-CST-DCA, was synthesized by grafting sulfabetaine (SB) and deoxycholic acid (DCA) onto corn starch (CST) molecules through etherification and esterification. The modification mechanism was discussed to determine its chemical structure, morphological properties, and thermal stability. Peptide-loaded nanomicelles (SB-CST-DCA-WP) were prepared using WP as the core material. The encapsulation efficiency and peptide loading amount reached 76.90 ± 1.52% and 18.27 ± 0.53%, respectively, with good stability and pH-responsive release behavior observed to effectively control WP release and enhance its antioxidant activity. The composite exhibited safety, non-toxicity, and good blood compatibility at concentrations below 125 μg/mL. Duodenum was identified as the main absorption site with an absorption ratio of 41.16 ± 0.36%., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A key strategy in enhancing the efficacy of collagen-based hydrogels involves incorporating polysaccharides, which have shown great promise for wound healing. In this study, semi-interpenetrating polymeric network (semi-IPN) hydrogels comprised of collagen (Col) with the macrocyclic oligosaccharide β-cyclodextrin (β-CD) (20-80 wt.%) were synthesised. Fourier-transform infrared (FTIR) spectroscopy confirmed the successful fabrication of these Col/β-CD hydrogels, evidenced by the presence of characteristic absorption bands, including the urea bond band at ∼1740 cm -1 , related with collagen crosslinking. Higher β-CD content was associated with increased crosslinking, higher swelling, and faster gelation. The β-CD content directly influenced the morphology and semi-crystallinity. All Col/β-CD hydrogels displayed superabsorbent properties, enhanced thermal stability, and exhibited slow degradation rates. Mechanical properties were significantly improved with contents higher than β-CD 40 wt.%. These hydrogels inhibited the growth of Escherichia coli bacteria and facilitated the controlled release of agents, such as malachite green, methylene blue, and ketorolac. The chemical composition of the Col/β-CD hydrogels did not induce cytotoxic effects on monocytes and fibroblast cells. Instead, they actively promoted cellular metabolic activity, encouraging cell growth and proliferation. Moreover, cell signalling modulation was observed, leading to changes in the expression of TNF-α and IL-10 cytokines. In summary, the results of this research indicate that these novel hydrogels possess multifunctional characteristics, including biocompatibility, super-swelling capacity, good thermal, hydrolytic, and enzymatic degradation resistance, antibacterial activity, inflammation modulation, and the ability to be used for controlled delivery of therapeutic agents, indicating high potential for application in advanced wound dressings.

Background: Cancer is a serious threat to human life, health and social development. In recent years, nanomicelles, as an emerging drug carrier material, have gradually entered people's field of vision because of their advantages of improving bioavailability, maintaining drug levels, reducing systemic side effects and increasing drug accumulation at target sites. Methods: In this study, B-GPSG nano-micelles were prepared by film dispersion hydration method using brucine as model drug and glycyrrhetinic acid-polyethylene glycol-3-methylene glycol-dithiodipropionic acid-glycerol monostearate polymer as nano-carrier. The preparation process, characterization, drug release in vitro, pharmacokinetics and liver targeting were investigated. Results: The results showed that the range of particle size, polydispersion index and Zeta potential were 102.7 ± 1.09 nm, 0.201 ± 0.02 and -24.5 ± 0.19 mV respectively. The entrapment efficiency and drug loading were 83.79 ± 2.13% and 12.56 ± 0.09%, respectively. The drug release experiments in vitro and pharmacokinetic experiments showed that it had obvious sustained release effect. For pharmacokinetics study, it shows that both the B-GPSG solution group and the B-PSG solution group changed the metabolic kinetic parameters of brucine, but the B-GPSG solution group had a better effect. Compared with the B-PSG solution group, the drug was more prolonged in rats. The half-life in the body and the retention time in the body of B-GPSG are more helpful to improve the bioavailability of the drug and play a long-term effect. The tail vein injection results of mice indicate that B-GPSG can target and accumulate brucine in the liver without affecting other key organs. Cell uptake experiments and tissue distribution experiments in vivo show that glycyrrhetinic acid modified nano-micelles can increase the accumulation of brucine in hepatocytes, has a good liver targeting effect, and can be used as a new preparation for the treatment of liver cancer. Conclusion: The B-SPSG prepared in this experiment can provide a new treatment method and research idea for the treatment of liver cancer., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Mesoporous silica microspheres (MSMs) possess poor biocompatibility. This study focuses on integrating MSMs with polymers to obtain hybrid materials with superior performance compared to the individual components and responsive release in specific environments. The synthesized MSMs were aminated, and subsequently, soybean hull polysaccharide (SHPs) was modified onto MSMs-NH 2 to produce MSMs-NH 2 @SHPs nanoparticles. The encapsulation rate, loading rate of curcumin (Cur), and in vitro release behavior were investigated. Results indicated that the encapsulation efficiency of Cur by MSMs-NH 2 @SHPs nanoparticles reached 75.58%, 6.95 times that of MSMs-NH 2 with a load capacity of 35.12%. It is noteworthy that these nanoparticles exhibit pH-responsive release capacity in vitro. The cumulative release rate of the three nanoparticles at pH 5.0 was higher than that at pH 7.4. MSMs-NH 2 @SHPs had a cumulative release rate of 56.55% at pH 7.4, increasing to 76.21% at pH 5.0. In vitro experiments have shown that MSMs-based nanoparticles have high delivery efficiency and can achieve pH-sensitive drug release, with a high release rate in a slightly acidic acid, highlighting the potential for controlled release of Cur., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The exploration of environmentally friendly slow-release fertilizer (SRF) based on natural bio-polymers is of great importance in the development of modern agriculture and horticulture. Herein, a novel starch carbamate (SC) modified sodium alginate (SA) hydrogel (SC/SAH) was prepared utilizing as-synthesized SC and natural SA through the cationic ions crosslinking method and ultimately the corresponding slow-release fertilizer (SC/SAH-SRF) was successfully developed by immersing the dried SC/SAH matrix into saturated urea solution. Due to the low gelation temperature and high viscosity of the synthesized SC, the formed SC/SAH exhibits significantly enhanced properties including excellent water absorbency up to 8.02 g/g with considerable repeatability, abundant pore structure and high hydrophilicity compared with the neat SAH and natural starch based hydrogel (NS/SAH). Accordingly, the SC/SAH leads to higher urea loading amount ∼ 1.28 g/g. Importantly, the resultant SC/SAH-SRF also shows superior slow-release performance, yielding a cumulative urea release of only 61.6 % within 10 h and almost completely release >16 h in water, what's more, only 58.5 % of the urea releases within 25 days and exceeding 50 days for complete release in soil column assays. The slow-release of urea from SC/SAH-SRF well complies for the first-order kinetics and accomplishes via a non-Fickian diffusion process. Moreover, the pot experiment demonstrates that the SC/SAH-SRF has higher growth promotion role for the maize seedlings than those of others. Consequently, this work provides a novel strategy for preparing environmentally friendly SRF by blending modified starch and hydrogel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Coated fertilizers have been widely used to improve fertility in barren land. However, improving soil structure and water-retention capacity is also essential for arid and semi-arid areas with sandy soils to promote crop growth. Most currently available coated fertilizers rarely meet these requirements, limiting their application scope. Therefore, this study "tailored" pectin-montmorillonite (PM) multifunctional coatings for arid areas, featuring intercalation reactions and nanoscale entanglement between pectin and montmorillonite via hydrogen bonding and electrostatic and van der Waals forces. Notably, PM coatings have demonstrated an effective "relay" model of action. First, the PM-50 coating could act as a "shield" to protect urea pills, increasing the mechanical strength (82.12 %). Second, this coating prolonged the release longevity of urea (<0.5 h to 15 days). Further, the remaining coating performed a water-retention function. Subsequently, the degraded coating improved the soil properties. Thus, this coating facilitated the growth of wheat seedlings in a simulated arid environment. Moreover, the cytotoxicity test, life cycle assessment, and soil biodegradation experiment showed that the PM coating exhibited minimal environmental impact. Overall, the "relay" model of PM coating overcomes the application limitations of traditional coated fertilizers and provides a sustainable strategy for developing coating materials in soil degradation areas., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hydrogels can serve as local drug delivery depots that protect the biological activity of labile therapeutics. However, drug release from conventional hydrogels is typically rapid, which is not ideal for many therapeutic agents. We developed a composite hydrogel that enables sustained drug release in response to ultrasound. The composite, termed an acoustically responsive scaffold (ARS), consists of a fibrin hydrogel and a phase-shift emulsion. Upon exposure to ultrasound, the emulsion is vaporized into bubbles, which leads to release of drugs contained within the emulsion. Previously, ARSs have been used in regenerative applications to stimulate blood vessel growth. Here, we characterize the release kinetics and mechanisms of ARSs. Release exhibits a triphasic pattern compromising a slow phase prior to ultrasound exposure; a transient, fast phase immediately after ultrasound exposure that follows a sigmoidal profile; and a sustained, steady phase. In each phase, we demonstrate how derived kinetics parameters are impacted by the ARS composition (e.g., fibrin and emulsion concentrations) and ultrasound properties (e.g., acoustic pressure, pulse duration). Using confocal microscopy, protein assays, and B-mode ultrasound imaging, we demonstrate that drug release from an ARS is independent of fibrin degradation and dependent on bubble growth. These results are critical in optimizing ARSs for delivery of therapeutic agents., Competing Interests: Declaration of competing interest The authors state no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Topical delivery to paranasal sinuses through sustained-release stents is one of the new horizons in treating chronic rhinosinusitis (CRS). This study aims to introduce and evaluate sustained co-release of encapsulated ciprofloxacin (CIP) and dexamethasone (DEX) in polyvinyl alcohol-based carriers within the maxillary sinus of rabbit animals. DEX and CIP were loaded in a tyramine-substituted polyvinyl alcohol microparticle (PVATyr MP). The mechanical stability, degradability, and sustained-release patterns of both drugs as well as cellular cytocompatibility were assessed in vitro. The PVATyr MPs were then injected into the maxillary sinus of rabbits and they were monitored weekly for 21 days. Nasal endoscopy, MRI imaging, and tissue microscopy were used to follow the changes and compared them with the control condition. Also, the concentrations of drugs were evaluated in the maxillary sinus and blood samples over the study period. Produced PVA-based MPs possessed a relatively narrow particle size distribution (CV 7.7%) with proper physical stability until 30 days of incubation. The uniform-sized PVATyr MPs and their surrounding hydrogel showed sustained-release profiles for DEX and CIP for up to 32 days in vitro. The injected drugs-loaded hydrogel showed complete clearance from the maxillary sinus of rabbits within 28 days. The concentrations of DEX and CIP in mucosal remained within the therapeutic window when measured on days 7, 14, and 21, which were well above the plasma concentrations without any pathological changes in endoscopy, MRI imaging, and histological examinations. DEX/CIP loaded PVATyr MPs provided an effective, controlled, and safe sustained-drug delivery in both in vitro and in vivo analyses at therapeutic concentrations with minimal systemic absorption, suggesting a promising treatment approach for CRS., (© 2024. The Author(s).)

Hot melt extrusion (HME) processed Poly (lactic-co-glycolic acid) (PLGA) implant is one of the commercialized drug delivery products, which has solid, well-designed shape and rigid structures that afford efficient locoregional drug delivery on the spot of interest for months. In general, there are a variety of material, processing, and physiological factors that impact the degradation rates of PLGA-based implants and concurrent drug release kinetics. The objective of this study was to investigate the impacts of PLGA's material characteristics on PLGA degradation and subsequent drug release behavior from the implants. Three model drugs (Dexamethasone, Carbamazepine, and Metformin hydrochloride) with different water solubility and property were formulated with different grades of PLGAs possessing distinct co-polymer ratios, molecular weights, end groups, and levels of residual monomer (high/Viatel TM and low/ Viatel TM Ultrapure). Physicochemical characterizations revealed that the plasticity of PLGA was inversely proportional to its molecular weight; moreover, the residual monomer could impose a plasticizing effect on PLGA, which increased its thermal plasticity and enhanced its thermal processability. Although the morphology and microstructure of the implants were affected by many factors, such as processing parameters, polymer and drug particle size and distribution, polymer properties and polymer-drug interactions, implants prepared with Viatel TM PLGA showed a smoother surface and a stronger PLGA-drug intimacy than the implants with Viatel TM Ultrapure PLGA, due to the higher plasticity of the Viatel TM PLGA. Subsequently, the implants with Viatel TM PLGA exhibited less burst release than implants with Viatel TM Ultrapure PLGA, however, their onset and progress of the lag and substantial release phases were shorter and faster than the Viatel TM Ultrapure PLGA-based implants, owing to the residual monomer accelerated the water diffusion and autocatalyzed PLGA hydrolysis. Even though the drug release profiles were also influenced by other factors, such as composition, drug properties and polymer-drug interaction, all three cases revealed that the residual monomer accelerated the swelling and degradation of PLGA and impaired the implant's integrity, which could negatively affect the subsequent drug release behavior and performance of the implants. These results provided insights to formulators on rational PLGA implant design and polymer selection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Wound healing is critical to the structural and functional restoration of damaged tissue. However, effective wound closure and healing are always great challenges in regenerative engineering. This study provided bioinspired wearable hydrogel composites with drug-releasing hydrogel and nonclose-packed photonic crystals (NPCs) for wound therapy and naked-eye visual early warning of wound dehiscence. Molecular dynamics models and drug-releasing results illustrated the sustained drug release of ibuprofen, and the mechanical properties of the drug-releasing hydrogel were optimized with 1410% tensile strain by introducing fish collagen; their biocompatibility and adhesion were also improved. The structural color of the NPCs blue-shifted from 630 to 500 nm with 15.0% strain, and the original color was customized with poly(methyl methacrylate) (PMMA) concentration and acrylamide content. Compared with the gauze and the traditional hydrogels, the composite provided a moist environment and an effectively closed wound; the debridement and released drug avoided inflammation, and the rat wound was healed 40.5% on the third day and essentially 100% on the 14th day. The work provided a novel strategy for wound healing and naked-eye visual early warning when a wound deforms, which is expected to promote the synergistic development of clinical treatment and visualized early warning.

In this study, sodium alginate/ soy protein isolate (SPI) microgels cross-linked by various divalent cations including Cu 2+ , Ba 2+ , Ca 2+ , and Zn 2+ were fabricated. Cryo-scanning electron microscopy observations revealed distinctive structural variations among the microgels. In the context of gastric pH conditions, the degree of shrinkage of the microgels followed the sequence of Ca 2+ > Ba 2+ > Cu 2+ > Zn 2+ . Meanwhile, under intestinal pH conditions, the degree of swelling was ranked as Zn 2+ > Ca 2+ > Ba 2+ > Cu 2+ . The impact of these variations was investigated through in vitro digestion studies, revealing that all microgels successfully delayed the release of β-carotene within the stomach. Within the simulated intestinal fluid, the microgel cross-linked with Zn 2+ exhibited an initial burst release, while those cross-linked with Cu 2+ , Ba 2+ , or Ca 2+ displayed a sustained release pattern. This research underscores the potential of sodium alginate/SPI microgels cross-linked with different divalent cations as efficient controlled-release delivery systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Encapsulating enzymes in metal-organic frameworks is a common practice to improve enzyme stability against harsh conditions. However, the synthesis of enzyme@MOFs has been primarily limited to small-scale laboratory settings, hampering their industrial applications. Spray drying is a scalable and cost-effective technology, which has been frequently used in industry for large-scale productions. Despite these advantages, its potential for encapsulating enzymes in MOFs remains largely unexplored, due to challenges such as nozzle clogging from MOF particle formation, utilization of toxic organic solvents, controlled release of encapsulated enzymes, and high temperatures that could compromise enzyme activity. Herein, we present a novel approach for preparing phytase@MIL-88 A using solvent-free spray drying. This involves atomizing two MOF precursor solutions separately using a three-fluid nozzle, with enzyme release controlled by manipulating defects within the MOFs. The physicochemical properties of the spray dried particles are characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Leveraging the efficiency and scalability of spray drying in industrial production, this scalable encapsulation technique holds considerable promise for broad industrial applications., Competing Interests: Declaration of competing interest All authors declare no competing interest., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Core-shell nanostructures are powerful platforms for the development of novel nanoscale drug delivery systems with sustained drug release profiles. Coaxial electrospinning is facile and convenient for creating medicated core-shell nanostructures with elaborate designs with which the sustained-release behaviors of drug molecules can be intentionally adjusted. With resveratrol (RES) as a model for a poorly water-soluble drug and cellulose acetate (CA) and PVP as polymeric carriers, a brand-new electrospun core-shell nanostructure was fabricated in this study. The guest RES and the host CA molecules were designed to have a reverse gradient distribution within the core-shell nanostructures. Scanning electron microscope and transmission electron microscope evaluations verified that these nanofibers had linear morphologies, without beads or spindles, and an obvious core-shell double-chamber structure. The X-ray diffraction patterns and Fourier transform infrared spectroscopic results indicated that the involved components were highly compatible and presented in an amorphous molecular distribution state. In vitro dissolution tests verified that the new core-shell structures were able to prevent the initial burst release, extend the continuous-release time period, and reduce the negative tailing-off release effect, thus ensuring a better sustained-release profile than the traditional blended drug-loaded nanofibers. The mechanism underlying the influence of the new core-shell structure with an RES/CA reverse gradient distribution on the behaviors of RES release is proposed. Based on this proof-of-concept demonstration, a series of advanced functional nanomaterials can be similarly developed based on the gradient distributions of functional molecules within electrospun multi-chamber nanostructures.

Battlefield wounds are at high risk of infection due to gross contamination and delays in evacuation from forward-deployed locations. The aim of this study was to formulate an antibiotic wound gel for application by a field medic in austere environments to protect traumatic wounds from infection during transport. Formulation development was conducted over multiple phases to meet temperature, handling, in vitro elution, and in vivo tissue response requirements. Thermal properties were evaluated by vial inversion, DSC, and syringe expression force in a temperature range of 4-49°C. Handling was evaluated by spreading onto blood-contaminated tissue and irrigation resistance. Controlled antibiotic release was evaluated by a modified USP immersion cell dissolution method. Local tissue effects were evaluated in vivo by subcutaneous implantation in rats for 7 and 28 days. An oleogel composition of cholesterol, hydrogenated castor oil, soybean oil, and glyceryl monocaprylocaprate met the target performance criteria. Peak expression force from a 5 mL syringe at 4°C was 48.3 N, the dropping point temperature was 68°C, and the oleogel formulation could be spread onto blood-contaminated tissue and resisted aqueous irrigation. The formulation demonstrated sustained release of tobramycin in PBS at 32°C for 5 days. Implantation in a rat dorsal pocket demonstrated a slight tissue reaction after 7 days with minimal to no reaction after 28 days, comparable to a commercial hemostat control. Material resorption was evident after 28 days. The formulation met target characteristics and is appropriate for further evaluation in a large animal contaminated blast wound model., (© 2024 DePuy Synthes Products LLC and The Author(s). Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals LLC.)

Chemotherapy is widely used for cancer therapy but with unsatisfied efficacy, mainly due to the inefficient delivery of anticancer agents. Among the critical "five steps" drug delivery process, internalization into tumor cells and intracellular drug release are two important steps for the overall therapeutic efficiency. Strategy based on active targeting or TME-responsive is developed individually to improve therapeutic efficiency, but with limited improvement. However, the combination of these two strategies could potentially augment the drug delivery efficiency and therapeutic efficiency, consequently. Therefore, this work constructs a library of stimuli-responsive aptamer-drug conjugates (srApDCs), as "dual-targeted" strategy for cancer treatment that enables targeted drug delivery and controlled drug release. Specifically, this work uses different stimuli-responsive linkers to conjugate a tumor-targeting aptamer (i.e., AS1411) with drugs, forming the library of srApDCs for targeted cancer treatment. This design hypothesis is validated by the experimental data, which indicated that the aptamer could selectively enhance uptake of the srApDCs and the linkers could be cleaved by pathological cues in the TME to release the drug payload, leading to a significant enhancement of therapeutic efficacy. These results underscore the potential of the approach, providing a promising methodology for cancer therapy., (© 2024 Wiley‐VCH GmbH.)

Ovarian cancer, the deadliest gynecological malignancy, primarily treated with chemotherapy. However, systemic chemotherapy often leads to severe toxic side effects and chemoresistance. Drug-loaded aerogels have emerged as a promising method for drug delivery, as they can improve drug solubility and bioavailability, control drug release, and reduce drug distribution in non-targeted tissues, thereby minimizing side effects. In this research, chitosan oligosaccharide (COS)-loaded nanofibers composite chitosan (CS) aerogels (COS-NFs/CS) with a porous network structure were created using nanofiber recombination and freeze-drying techniques. The core layer of the aerogel has a COS loading rate of 60 %, enabling the COS-NFs/CS aerogel to significantly inhibit the migration and proliferation of ovarian cancer cells (resulting in a decrease in the survival rate of ovarian cancer cells to 33.70 % after 48 h). The coaxial fiber's unique shell-core structure and the aerogel's porous network structure enable the COS-NFs/CS aerogels to release COS steadily and slowly over 30 days, effectively reducing the initial burst release of COS. Additionally, the COS-NFs/CS aerogels exhibit good biocompatibility, degradability (only retaining 18.52 % of their weight after 6 weeks of implantation), and promote angiogenesis, thus promoting wound healing post-oophorectomy. In conclusion, COS-NFs/CS aerogels show great potential for application in the treatment of ovarian cancer., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Hua Liu reports financial support was provided by Natural Science Foundation of Hubei Province. Yan-Xiang Cheng reports financial support was provided by Cross-innovation talent project in Renmin Hospital of Wuhan University. Yan-Xiang Cheng reports financial support was provided by Undergraduate education quality construction comprehensive reform project. Yan-Xiang Cheng reports financial support was provided by National Natural Science Foundation of China. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Inflammatory bowel disease (IBD) is a kind of auto-immune disease characterized by disrupted intestinal barrier and mucosal epithelium, imbalanced gut microbiome and deregulated immune responses. Therefore, the restoration of immune equilibrium and gut microbiota could potentially serve as a hopeful approach for treating IBD. Herein, the oral probiotic Escherichia coli Nissle 1917 (ECN) was genetically engineered to express secretable interleukin-2 (IL-2), a kind of immunomodulatory agent, for the treatment of IBD. In our design, probiotic itself has the ability to regulate the gut microenvironment and IL-2 at low dose could selectively promote the generation of regulatory T cells to elicit tolerogenic immune responses. To improve the bioavailability of ECN expressing IL-2 (ECN-IL2) in the gastrointestinal tract, enteric coating Eudragit L100-55 was used to coat ECN-IL2, achieving significantly enhanced accumulation of engineered probiotics in the intestine. More importantly, L100-55 coated ECN-IL2 could effectively activated Treg cells to regulate innate immune responses and gut microbiota, thereby relieve inflammation and repair the colon epithelial barrier in dextran sodium sulfate (DSS) induced IBD. Therefore, genetically and chemically modified probiotics with excellent biocompatibility and efficiency in regulating intestinal microflora and intestinal inflammation show great potential for IBD treatment in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Film-coated modified-release tablets are an important dosage form amenable to targeted, controlled, or delayed drug release in the specific region of the gastrointestinal (GI) tract. Depending on the film composition and interaction with the GI fluid, such coated products can modulate the local bioavailability, systemic absorption, protection as an enteric barrier, etc. Although the interaction of a dosage form with the surrounding dissolution medium is vital for the resulting release behavior, the underlying physicochemical phenomena at the film and core levels occurring during the drug release process have not yet been well described. In this work, we attempted to tackle this limitation by introducing a novel in vitro test based on optical coherence tomography (OCT) that allows an in-situ investigation of the sub-surface processes occurring during the drug release. Using a commercially available tablet based on osmotic-controlled release oral delivery systems (OROS), we demonstrated the performance of the presented prototype in terms of monitoring the membrane thickness and thickness variability, the surface roughness, the core swelling behavior, and the porosity of the core matrix throughout the in vitro drug release process from OROS. The superior spatial (micron scale) and temporal (less than 10 ms between the subsequent tomograms) resolution achieved in the proposed setup provides an improved understanding of the dynamics inside the microstructure at any given time during the dissolution procedure with the previously unattainable resolution, offering new opportunities for the design and testing of patient-centric dosage forms., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:RCPE, Graz reports financial support was provided by Austrian COMET Program. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2024 Elsevier B.V. All rights reserved.)

The persistent challenge of healing infectious wounds and the rise of bacterial resistance represent significant hurdles in contemporary medicine. In this study, based on the natural small molecule drug Rhein self-assembly to form hydrogels and coordinate assembly with silver ions (Ag + ), a sustained-release carrier-free hydrogel with compact structure is constructed to promote the repair of bacterial-infected wounds. As a broad-spectrum antimicrobial agent, Ag + can avoid the problem of bacterial resistance caused by the abuse of traditional antibiotics. In addition, due to the slow-release properties of Rhein hydrogel, continuous effective concentration of Ag + at the wound site can be ensured. The assembly of Ag + and Rhein makes the hydrogel system with enhanced mechanical stability. More importantly, it is found that Rhein effectively promotes skin tissue regeneration and wound healing by reprogramming M1 macrophages into M2 macrophages. Further mechanism studies show that Rhein realizes its powerful anti-inflammatory activity through NRF2/HO-1 activation and NF-κB inhibition. Thus, the hydrogel system combines the excellent antibacterial properties of Ag + with the excellent anti-inflammatory and tissue regeneration ability of Rhein, providing a new strategy for wound management with dual roles., (© 2024 Wiley‐VCH GmbH.)

Background: Diclofenac sodium (DS) and celecoxib (CEL) are primary anti-inflammatory agents used in the treatment of osteoarthritis (OA). Formulating these drugs into extended-release versions can effectively address the issue of multiple daily doses. In this study, we designed and synthesized a novel poly(lactic-co-glycolic acid) (PLGA) nanoliposome as a dual-drug delivery sustained-release formulation (PPLs-DS-CEL) to achieve long-lasting synergistic treatment of OA with both DS and CEL., Methods: PPLs-DS-CEL was synthesized by the reverse evaporation method and evaluated for its physicochemical properties, encapsulation efficiency, drug release kinetics and biological properties. A rat OA model was established to assess the therapeutic efficacy and biosafety of PPLs-DS-CEL., Results: The particle size of PPLs-DS-CEL was 218.36 ± 6.27 nm, with a potential of 32.56 ± 3.28 mv, indicating a homogeneous vesicle size. The encapsulation of DS and CEL by PPLs-DS-CEL was 95.18 ± 4.43% and 93.63 ± 5.11%, with drug loading of 9.56 ± 0.32% and 9.68 ± 0.34%, respectively. PPLs-DS-CEL exhibited low cytotoxicity and hemolysis, and was able to achieve long-lasting synergistic analgesic and anti-inflammatory therapeutic effects in OA through slow release of DS and CEL, demonstrating good biosafety properties., Conclusion: This study developed a novel sustained-release nanoliposomes formulation capable of co-loading two drugs for the long-acting synergistic treatment of OA. It offers a new and effective therapeutic strategy for OA treatment in the clinic settings and presents a promising approach for drug delivery systems., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

This work aimed to synthesize oregano essential oil/β-cyclodextrin microcapsules (OEO/β-CDs) and then prepare gelatin-based controlled-release antibacterial films with different OEO/β-CDs contents (0%-2%) for chilling preservation of grass carp fillets. The results of FTIR, XRD, DSC and accelerated release ratio showed that OEO was successfully encapsulated in OEO/β-CDs and its thermal stability was effectively improved. Moreover, at 2% of addition amount of OEO/β-CDs, the tensile strength of the films increased from 14.43 MPa to 18.72 MPa. In addition, the films showed significant antibacterial activity against Pseudomonas (61.52%), Aeromonas (62.87%), and Shewanella putrefaciens (66.67%). Preservation experiments showed that the films effectively prevented the increase of TVB-N, and TBA value of the refrigerated fillets and significantly suppressed the growth of spoilage organisms, thus extending the shelf life by 2-3 days. Therefore, the synthesized film has promising potential as an active packaging material for the preservation of grass carp., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

As a food-derived natural component, oregano essential oil (OEO) exhibits excellent activity against Botrytis cinerea (B. cinerea). However, its poor water solubility and chemical instability limit its application in preservation. In this study, we determined the composition of OEO and encapsulated it in microcapsules using gelatin/carrageenan (GE/CRG) as the capsule wall, achieving a particle size of 336.10 nm and an encapsulation efficiency of 87.79 %. The microcapsules realize the slow-release duration of OEO to over 80 h. More importantly, due to the slow-release effect of OEO, OEO-GE/CRG microcapsules demonstrated excellent inhibitory activity against B. cinerea with an EC 50 value of 0.18 mg/mL. The microcapsule treatment significantly prolonged the preservation period of cherry tomatoes in infection models with B. cinerea. These results indicate that OEO-GE/CRG microcapsules could serve as a potential fungal inhibitor and agent for fruit storage and preservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Polysaccharides-based smart fertilizers are essential for promoting plant growth, yet significant challenges exist in achieving stable structures and synchronizing nutrient release and plant growth. This study developed a temperature-responsive gating chitosan-based microcapsule (CTSMC-g-PNIPAM) by grafting N-isopropyl acrylamide (NIPAM) onto chitosan microcapsules (CTSMC) via atom transfer radical polymerization (ATRP). The interfacial crosslinking of chitosan (CTS) and terephthalendehyde (TPA) formed the CTSMC matrix with a hollow chamber structure and ensured stability. CTSMC-g-PNIPAM exhibited reversible temperature-responsive gating properties and sustained release behavior, and the PNIPAM chains acted like gating switches. Below the low critical solution temperature (LCST) (25 °C), the PNIPAM chains stretched and the gating switch closed, slowing down the release rate. Above the LCST (40 °C), the PNIPAM chains contracted and the gating switch opened, accelerating the release rate. The release behaviors of CTSMC-g-PNIPAM in soil indicated that the gating microcapsule effectively prolonged the release of urea. Moreover, the cumulative release of CTSMC-g-PNIPAM at 40 °C was significantly higher than at 25 °C. The first-order kinetic and Korsmeyer-Peppas model indicate that the urea release involves concentration gradient diffusion and skeleton dissolution. Compared with pure urea, urea@(CTSMC-g-PNIPAM) increased the growth status of maize, suggesting a promising strategy for smart fertilizers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This paper demonstrates the molecular design of stimuli-responsive, methyl cellulose-based, injectable hydrogels consisting of two orthogonal supramolecular networks. Rapidly injectable hydrogels that undergo autonomous gelation without permanent cross-links are crucial for biomedical applications due to minimal invasiveness, adaptability to irregular target sites, and precise spatiotemporal control. However, they often lack sufficient mechanical strength, physicochemical stability, and high biocompatibility. Herein, we develop a molecular design of a non-covalent double-network system by strategically incorporating specific host-guest cross-linking sites into a thermo-responsive network, which is reinforced by interpenetration with a cellulose-based network via their sequential formation. The resulting hydrogel, composed of non-cytotoxic materials, demonstrates high cell viability (>90 %) until its concentration of 25 mg mL -1 , rapid self-healing within 1 min, suitable injection pressure (1.1 kPa), and drug release behavior controllable by heat, chemicals, or ultrasound. Therefore, the hydrogel could be loaded with diclofenac (3.5 mg mL -1 ), a non-steroidal anti-inflammatory drug, and treat osteoarthritis when injected into a rat knee joint, achieving results comparable to those in a control group without osteoarthritis. This system thus holds promise for the delivery of various drugs as a responsive vector, offering synergistic effects via the inclusion of functional polymeric networks or exogenous additives for bio- or environment-related applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Genital herpes, caused by herpes simplex virus type 2 (HSV-2), affects nearly 500 million people, mostly women. Since the main route of transmission is sexual contact, the development of an acyclovir extended-release vaginal microbicide would be a suitable tool for the prevention of virus transmission. In this work, we evaluated the potential of three polymers with different characteristics (chitosan, xanthan gum and ethyl cellulose) for obtaining acyclovir extended-release vaginal tablets. By combining the polymers, certain useful synergies were observed to modify their mucoadhesive capacity and control drug release. In the swelling studies, it observed that a polyelectrolyte complex with more moderate swelling and sustained gelation was formed between chitosan and xanthan gum exclusively in acidic medium (simulated vaginal fluid). This complex allowed prolonging the mucoadhesion of the tablets in ex vivo studies performed with vaginal mucosa, which would translate into better retention in the vagina after administration. In addition, the combination of chitosan and xanthan gum allowed obtaining a controlled release of acyclovir for 5 days, regardless of the pH of the medium, which would guarantee that drug release continues even in the presence of seminal fluid., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Citrus oil (CO) is a commonly used natural flavor with high volatility, which is not conducive to sustained release under food environmental stress. This study constructed novel β-cyclodextrin/cationic cellulose nanocrystal (β-CD/C-CNC) complexes via noncovalent interaction, which were used to stabilize CO-loaded Pickering emulsions (PE β-CD/C-CNC ). The C-CNC greatly improved the physical stability, droplet dispersion and viscoelasticity of PE β-CD/C-CNC by forming a tight network structure, as verified by rheological behavior. Moreover, C-CNC improved the wettability of β-CD/C-CNC complexes and enhanced the interaction between adjacent β-CD/C-CNC complexes. C-CNC also contributed to the interfacial viscoelasticity, hydrated mass, and layer thickness via the interfacial dilational modulus and QCM-D. β-CD/C-CNC complexes adsorbed on the oil-water interface gave rise to a dense filling layer as a physical barrier, enhancing the sustained-release performance of PE β-CD/C-CNC by limiting diffusion of citrus essential oil into the headspace. This study provides new technical approaches for aroma retention in the food industry., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024. Published by Elsevier Ltd.)

The freeze-drying approach was used to create inclusion complexes utilizing alkyl gallates and β-cyclodextrin, namely dodecyl gallate, octyl gallate, butyl gallate, and ethyl gallate, which are exemplary examples of phenolic esters. The everted-rat-gut-sac model demonstrated that the inclusion complexes released alkyl gallates, which were subsequently hydrolyzed to generate free gallic acid, as evidenced by HPLC-UV analysis. Both gallic acid and short-chain alkyl gallates were capable of permeating the small intestinal membrane. The transport rate of gallic acid (or alkyl gallates) exhibited an initial rise followed by a drop when the carbon-chain lengths varied. The inclusion complex groups exhibited a superior sustained-release effect compared to the comparable alkyl gallates groups, thus possibly leading to higher bioavailability and stronger bioactivity. Moreover, altering the length of the carbon chain will allow for the effortless achievement of regulated release of phenolic compounds and short-chain phenolic esters from such β-cyclodextrin inclusion complexes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Implementing encapsulation techniques is pivotal in safeguarding bioactive molecules against environmental conditions for drug delivery systems. Moreover, the food-grade nanocarrier is a delivery system and food ingredient crucial in creating nutraceutical foods. Nano α-lactalbumin has been shown to be a promissory nanocarrier for hydrophobic molecules. Furthermore, the nanoprotein can enhance the tecno-functional properties of food such as foam and emulsion. The present study investigated the nanostructured α-lactalbumin protein (nano α-la) as a delivery and controlled release system for bioactive molecules in a gastric-intestinal in vitro mimic system., Results: The nano α-la was synthesized by a low self-assembly technique, changing the solution ionic strength by NaCl and obtaining nano α-la 191.10 ± 21.33 nm and a spherical shape. The nano α-la showed higher encapsulation efficiency and loading capacity for quercetin than riboflavin, a potential carrier for hydrophobic compounds. Thermal analysis of nano α-la resulted in a ΔH of -1480 J g -1 for denaturation at 57.44 °C. The nanostructure formed by self-assembly modifies the foam volume increment and stability. Also, differences between nano and native proteins in emulsion activity and stability were noticed. The release profile in vitro showed that the nano α-la could not hold the molecules in gastric fluid. The Weibull and Korsmeyer-Peppas model better fits the release profile behavior in the studied fluids., Conclusion: The present study shows the possibility of nano α-la as an alternative to molecule delivery systems and nutraceutical foods' formulation because of the high capacity to encapsulate hydrophobic molecules and the improvement of techno-functional properties. However, the nanocarrier is not perfectly suitable for the sustainable delivery of molecules in the gastrointestinal fluid, demanding improvements in the nanocarrier. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Cancer immunotherapy has revolutionized clinical cancer treatments by taking advantage of the immune system to selectively and effectively target and kill cancer cells. However, clinical cancer immunotherapy treatments often have limited efficacy and/or present severe adverse effects associated primarily with their systemic administration. Localized immunotherapy has emerged to overcome these limitations by directly targeting accessible tumors via local administration, reducing potential systemic drug distribution that hampers drug efficacy and safety. Sustained-release formulations can prolong drug activity at target sites, which maximizes the benefits of localized immunotherapy to increase the therapeutic window using smaller dosages than those used for systemic injection, avoiding complications of frequent dosing. The performance of sustained-release formulations for localized cancer immunotherapy has been validated preclinically using various implantable and injectable scaffold platforms. This review introduces the sustained-release formulations developed for localized cancer immunotherapy and highlights their biomaterial-based platforms for representative classes, including inorganic scaffolds, natural hydrogels, synthetic hydrogels, and microneedle patches. The design rationale and other considerations are summarized for further development of biomaterials for the construction of optimal sustained-release formulations.