Search

DNA Pol III holoenzyme (HE) is the major DNA replicase of Escherichia coli. It is a highly accurate enzyme responsible for simultaneously replicating the leading- and lagging DNA strands. Interestingly, the fidelity of replication for the two DNA strands is unequal, with a higher accuracy for lagging-strand replication. We have previously proposed this higher lagging-strand fidelity results from the more dissociative character of the lagging-strand polymerase. In support of this hypothesis, an E. coli mutant carrying a catalytic DNA polymerase subunit (DnaE915) characterized by decreased processivity yielded an antimutator phenotype (higher fidelity). The present work was undertaken to gain deeper insight into the factors that influence the fidelity of chromosomal DNA replication in E. coli. We used three different dnaE alleles (dnaE915, dnaE911, and dnaE941) that had previously been isolated as antimutators. We confirmed that each of the three dnaE alleles produced significant antimutator effects, but in addition showed that these antimutator effects proved largest for the normally less accurate leading strand. Additionally, in the presence of error-prone DNA polymerases, each of the three dnaE antimutator strains turned into mutators. The combined observations are fully supportive of our model in which the dissociative character of the DNA polymerase is an important determinant of in vivo replication fidelity. In this model, increased dissociation from terminal mismatches (i.e., potential mutations) leads to removal of the mismatches (antimutator effect), but in the presence of error-prone (or translesion) DNA polymerases the abandoned terminal mismatches become targets for error-prone extension (mutator effect). We also propose that these dnaE alleles are promising tools for studying polymerase exchanges at the replication fork., (Copyright © 2019 The Authors. Published by Elsevier B.V. All rights reserved.)

The fidelity of DNA replication is a critical factor in the rate at which cells incur mutations. Due to the antiparallel orientation of the two chromosomal DNA strands, one strand (leading strand) is replicated in a mostly processive manner, while the other (lagging strand) is synthesized in short sections called Okazaki fragments. A fundamental question that remains to be answered is whether the two strands are copied with the same intrinsic fidelity. In most experimental systems, this question is difficult to answer, as the replication complex contains a different DNA polymerase for each strand, such as, for example, DNA polymerases δ and ε in eukaryotes. Here we have investigated this question in the bacterium Escherichia coli , in which the replicase (DNA polymerase III holoenzyme) contains two copies of the same polymerase (Pol III, the dnaE gene product), and hence the two strands are copied by the same polymerase. Our in vivo mutagenesis data indicate that the two DNA strands are not copied with the same accuracy, and that, remarkably, the lagging strand has the highest fidelity. We postulate that this effect results from the greater dissociative character of the lagging-strand polymerase, which provides additional options for error removal. Our conclusion is strongly supported by results with dnaE antimutator polymerases characterized by increased dissociation rates., Competing Interests: The authors declare no conflict of interest.

Escherichia coli DNA polymerase III holoenzyme (HE) contains a core polymerase consisting of three subunits: α (polymerase), ε (3'-5' exonuclease), and θ. Genetic experiments suggested that θ subunit stabilizes the intrinsically labile ε subunit and, furthermore, that θ might affect the cellular amounts of Pol III core and HE. Here, we provide biochemical evidence supporting this model by analyzing the amounts of the relevant proteins. First, we show that a ΔholE strain (lacking θ subunit) displays reduced amounts of free ε. We also demonstrate the existence of a dimer of ε, which may be involved in the stabilization of the protein. Second, θ, when overexpressed, dissociates the ε dimer and significantly increases the amount of Pol III core. The stability of ε also depends on cellular chaperones, including DnaK. Here, we report that: (i) temperature shift-up of ΔdnaK strains leads to rapid depletion of ε, and (ii) overproduction of θ overcomes both the depletion of ε and the temperature sensitivity of the strain. Overall, our data suggest that ε is a critical factor in the assembly of Pol III core, and that this is role is strongly influenced by the θ subunit through its prevention of ε degradation., (Copyright © 2012 Elsevier Inc. All rights reserved.)

The Escherichia coli dnaX36 mutant displays a mutator effect, reflecting a fidelity function of the dnaX-encoded τ subunit of the DNA polymerase III (Pol III) holoenzyme. We have shown that this fidelity function (i) applies to both leading- and lagging-strand synthesis, (ii) is independent of Pol IV, and (iii) is limited by Pol II.

The 28 kDa epsilon subunit of Escherichia coli DNA polymerase III is the exonucleotidic proofreader responsible for editing polymerase insertion errors. Here, we study the mechanism by which epsilon carries out the exonuclease activity. We performed quantum mechanics/molecular mechanics calculations on the N-terminal domain containing the exonuclease activity. Both the free-epsilon and a complex epsilon bound to a theta homologue (HOT) were studied. For the epsilon-HOT complex Mg(2+) or Mn(2+) were investigated as the essential divalent metal cofactors, while only Mg(2+) was used for free-epsilon. In all calculations a water molecule bound to the catalytic metal acts as the nucleophile for hydrolysis of the phosphate bond. Initially, a direct proton transfer to H162 is observed. Subsequently, the nucleophilic attack takes place followed by a second proton transfer to E14. Our results show that the reaction catalyzed with Mn(2+) is faster than that with Mg(2+), in agreement with experiment. In addition, the epsilon-HOT complex shows a slightly lower energy barrier compared to free-epsilon. In all cases the catalytic metal is observed to be pentacoordinated. Charge and frontier orbital analyses suggest that charge transfer may stabilize the pentacoordination. Energy decomposition analysis to study the contribution of each residue to catalysis suggests that there are several important residues. Among these, H98, D103, D129, and D146 have been implicated in catalysis by mutagenesis studies. Some of these residues were found to be structurally conserved on human TREX1, the exonuclease domains from E. coli DNA-Pol I, and the DNA polymerase of bacteriophage RB69.

The bacteriophage P1 hot gene product is a homolog of the theta subunit of E. coli DNA polymerase III. Previous studies with hot cloned on a plasmid have shown that Hot protein can substitute for theta, as evidenced by its stabilizing effect on certain dnaQ mutator mutants carrying an unstable pol III proofreading subunit (epsilon subunit). These results are consistent with Hot, like theta, being a replication protein involved in stabilizing the intrinsically unstable epsilon proofreading function. However, the function of hot for the viral life cycle is less clear. In the present study, we show that the hot gene is not essential. Based on its promoter structure, hot has been previously classified as a "late" phage gene, a property that is not easily reconciled with a presumed replication function. Here, we clarify this issue by demonstrating that P1 hot is actively expressed both during the lysogenic state and in the early stages of a lytic induction, in addition to its expression in the late stage of phage development. The results indicate that P1 hot has a complex expression pattern, compatible with a model in which Hot may affect the host replication machinery to benefit overall phage replication.

The epsilon subunit of Escherichia coli DNA polymerase III possesses 3'-exonucleolytic proofreading activity. Within the Pol III core, epsilon is tightly bound between the alpha subunit (DNA polymerase) and subunit. Here, we present the crystal structure of epsilon in complex with HOT, the bacteriophage P1-encoded homolog of , at 2.1 A resolution. The epsilon-HOT interface is defined by two areas of contact: an interaction of the previously unstructured N terminus of HOT with an edge of the epsilon central beta-sheet as well as interactions between HOT and the catalytically important helix alpha1-loop-helix alpha2 motif of epsilon. This structure provides insight into how HOT and, by implication, may stabilize the epsilon subunit, thus promoting efficient proofreading during chromosomal replication.

The Hot (homolog of theta) protein of bacteriophage P1 can substitute for the Escherichia coli DNA polymerase III theta subunit, as evidenced by its stabilizing effect on certain dnaQ mutants that carry an unstable polymerase III epsilon proofreading subunit (antimutator effect). Here, we show that Hot can also cause an increase in the mutability of various E. coli strains (mutator effect). The hot mutator effect differs from the one caused by the lack of theta. Experiments using chimeric theta/Hot proteins containing various domains of Hot and theta along with a series of point mutants show that both N- and C-terminal parts of each protein are important for stabilizing the epsilon subunit. In contrast, the N-terminal part of Hot appears uniquely responsible for its mutator activity.

To investigate the possible role of accessory subunits of Escherichia coli DNA polymerase III holoenzyme (HE) in determining chromosomal replication fidelity, we have investigated the role of the dnaX gene. This gene encodes both the tau and gamma subunits of HE, which play a central role in the organization and functioning of HE at the replication fork. We find that a classical, temperature-sensitive dnaX allele, dnaX36, displays a pronounced mutator effect, characterized by an unusual specificity: preferential enhancement of transversions and -1 frameshifts. The latter occur predominantly at non-run sequences. The dnaX36 defect does not affect the gamma subunit, but produces a tau subunit carrying a missense substitution (E601K) in its C-terminal domain (domain V) that is involved in interaction with the Pol III alpha subunit. A search for new mutators in the dnaX region of the chromosome yielded six additional dnaX mutators, all carrying a specific tau subunit defect. The new mutators displayed phenotypes similar to dnaX36: strong enhancement of transversions and frameshifts and only weak enhancement for transitions. The combined findings suggest that the tau subunit of HE plays an important role in determining the fidelity of the chromosomal replication, specifically in the avoidance of transversions and frameshift mutations.

The catalytic core of Escherichia coli DNA polymerase III holoenzyme contains three subunits: alpha, epsilon, and theta. The alpha subunit contains the polymerase, and the epsilon subunit contains the exonucleolytic proofreading function. The small (8-kDa) theta subunit binds only to epsilon. Its function is not well understood, although it was shown to exert a small stabilizing effect on the epsilon proofreading function. In order to help elucidate its function, we undertook a determination of its solution structure. In aqueous solution, theta yielded poor-quality nuclear magnetic resonance spectra, presumably due to conformational exchange and/or protein aggregation. Based on our recently determined structure of the theta homolog from bacteriophage P1, named HOT, we constructed a homology model of theta. This model suggested that the unfavorable behavior of theta might arise from exposed hydrophobic residues, particularly toward the end of alpha-helix 3. In gel filtration studies, theta elutes later than expected, indicating that aggregation is potentially responsible for these problems. To address this issue, we recorded 1H-15N heteronuclear single quantum correlation (HSQC) spectra in water-alcohol mixed solvents and observed substantially improved dispersion and uniformity of peak intensities, facilitating a structural determination under these conditions. The structure of theta in 60/40 (vol/vol) water-methanol is similar to that of HOT but differs significantly from a previously reported theta structure. The new theta structure is expected to provide additional insight into its physiological role and its effect on the epsilon proofreading subunit.

The theta subunit (holE gene product) of Escherichia coli DNA polymerase (Pol) III holoenzyme is a tightly bound component of the polymerase core. Within the core (alpha-epsilon-theta), the alpha and epsilon subunits carry the DNA polymerase and 3' proofreading functions, respectively, while the precise function of theta is unclear. holE homologs are present in genomes of other enterobacteriae, suggestive of a conserved function. Putative homologs have also been found in the genomes of bacteriophage P1 and of certain conjugative plasmids. The presence of these homologs is of interest, because these genomes are fully dependent on the host replication machinery and contribute few, if any, replication factors themselves. To study the role of these theta homologs, we have constructed an E. coli strain in which holE is replaced by the P1 homolog, hot. We show that hot is capable of substituting for holE when it is assayed for its antimutagenic action on the proofreading-impaired dnaQ49 mutator, which carries a temperature-sensitive epsilon subunit. The ability of hot to substitute for holE was also observed with other, although not all, dnaQ mutator alleles tested. The data suggest that the P1 hot gene product can substitute for the theta subunit and is likely incorporated in the Pol III complex. We also show that overexpression of either theta or Hot further suppresses the dnaQ49 mutator phenotype. This suggests that the complexing of dnaQ49-epsilon with theta is rate limiting for its ability to proofread DNA replication errors. The possible role of hot for bacteriophage P1 is discussed.

DNA polymerase III, the main replicative polymerase of E. coli, contains a small subunit, theta, that binds to the epsilon proofreading subunit and appears to enhance the enzyme's proofreading function--especially under extreme conditions. It was recently discovered that E. coli bacteriophage P1 encodes a theta homolog, named HOT. The (1)H-(15)N HSQC spectrum of HOT exhibits more uniform intensities and less evidence of conformational exchange than that of theta; this uniformity facilitates a determination of the HOT solution structure by NMR. The structure contains three alpha helices, as reported previously for theta; however, the folding topology of the two proteins is very different. Residual dipolar coupling measurements on labeled theta support the conclusion that it is structurally homologous with HOT. As judged by CD measurements, the melting temperature of HOT was 62 degrees C, compared to 56 degrees C for theta, consistent with other data suggesting greater thermal stability of the HOT protein.

The function of the theta subunit of Escherichia coli DNA polymerase III holoenzyme is not well established. theta is a tightly bound component of the DNA polymerase III core, which contains the alpha subunit (polymerase), the epsilon subunit (3'-->5' exonuclease), and the theta subunit, in the linear order alpha-epsilon-theta. Previous studies have shown that the theta subunit is not essential, as strains carrying a deletion of the holE gene (which encodes theta) proved fully viable. No significant phenotypic effects of the holE deletion could be detected, as the strain displayed normal cell health, morphology, and mutation rates. On the other hand, in vitro experiments have indicated the efficiency of the 3'-exonuclease activity of epsilon to be modestly enhanced by the presence of theta. Here, we report a series of genetic experiments that suggest that theta has a stabilizing role for the epsilon proofreading subunit. The observations include (i) defined DeltaholE mutator effects in mismatch-repair-defective mutL backgrounds, (ii) strong DeltaholE mutator effects in certain proofreading-impaired dnaQ strains, and (iii) yeast two- and three-hybrid experiments demonstrating enhancement of alpha-epsilon interactions by the presence of theta. theta appears conserved among gram-negative organisms which have an exonuclease subunit that exists as a separate protein (i.e., not part of the polymerase polypeptide), and the presence of theta might be uniquely beneficial in those instances where the proofreading 3'-exonuclease is not part of the polymerase polypeptide.

The DNA polymerase III holoenzyme (HE) is the primary replicative polymerase of Escherichia coli. The epsilon subunit of the HE complex provides the 3'-exonucleolytic proofreading activity for this enzyme complex. epsilon consists of two domains: an N-terminal domain containing the proofreading exonuclease activity (residues 1-186) and a C-terminal domain required for binding to the polymerase (alpha) subunit (residues 187-243). Multidimensional NMR studies of (2)H-, (13)C-, and (15)N-labeled N-terminal domains (epsilon186) were performed to assign the backbone resonances and measure H(N)-H(N) nuclear Overhauser effects (NOEs). NMR studies were also performed on triple-lableled [U-(2)H,(13)C,(15)N]epsilon186 containing Val, Leu, and Ile residues with protonated methyl groups, which allowed for the assignment of H(N)-CH(3) and CH(3)-CH(3) NOEs. Analysis of the (13)C(alpha), (13)C(beta), and (13)CO shifts, using chemical shift indexing and the TALOS program, allowed for the identification of regions of the secondary structure. H(N)-H(N) NOEs provided information on the assembly of the extended strands into a beta-sheet structure and confirmed the assignment of the alpha helices. Measurement of H(N)-CH(3) and CH(3)-CH(3) NOEs confirmed the beta-sheet structure and assisted in the positioning of the alpha helices. The resulting preliminary characterization of the three-dimensional structure of the protein indicated that significant structural homology exists with the active site of the Klenow proofreading exonuclease domain, despite the extremely limited sequence homology. On the basis of this analogy, molecular modeling studies of epsilon186 were performed using as templates the crystal structures of the exonuclease domains of the Klenow fragment and the T4 DNA polymerase and the recently determined structure of the E. coli Exonuclease I. A multiple sequence alignment was constructed, with the initial alignment taken from the previously published hidden Markov model and NMR constraints. Because several of the published structures included complexed ssDNA, we were also able to incorporate an A-C-G trinucleotide into the epsilon186 structure. Nearly all of the residues which have been identified as mutators are located in the portion of the molecule which binds the DNA, with most of these playing either a catalytic or structural role.