Search

• Large scale wind farm is designed including SCIG and DFIG units in two sites. • Proposed control strategy designs off-grid and grid-tied functionality for sites. • Sites and grid are supported by STATCOM and SVC to deal with voltage imbalance. • Fault ride through capability is enhanced by the proposed control strategy. • Frequency control is designed under grid-tied and off-grid operations. This paper presents a multi-objective control scheme on the interconnected wind farms which are formed by different wind turbines including doubly fed induction generators (DFIG) and squirrel cage induction generators (SCIG). The proposed control system aims to control voltage, frequency, and mechanical power in the wind farms under wind/load alterations, faults, and outages. The voltage stability and fault ride through capability are improved. The proposed model also deals with unbalanced loading and faulty conditions. All the aforementioned points are realized under both off-grid and grid-tied conditions. For voltage stability improvement, each wind farm is integrated with one static VAR compensator (SVC) and the grid-side is integrated with one static synchronous compensator (STATCOM). In the grid-tied, the resilience following events is improved by proper control of STATCOM. In the off-grid, the installed SVC at each site is responsible for increasing resilience. The proposed control systems are modeled and implemented on a typical test grid, and numerical simulations are carried out in MATLAB/SIMULINK software. It is demonstrated that the proposed multi-objective control scheme efficiently controls all individual wind farms, achieves a coordinated management between different wind farms, deals with stability/unbalanced operating condition/faults, increases resilience and improves fault ride through capability. [ABSTRACT FROM AUTHOR]

• Integrated system including DFIG, battery storage, TCR and TSC is implemented. • Set of TCR-TSC-DFIG is controlled to compensate voltage sag-swell. • Set of DFIG-battery is controlled to damp out oscillations and power regulation. • Proper control loop is designed to improve DFIG resilience under three-phase fault. • Set of TSC-TCR-battery balances the unbalanced time-varying load. This paper presents a novel control scheme in doubly-fed induction generators (DFIG) wind turbine for operation under time-varying unbalanced loads. The proposed control scheme is implemented on a DFIG connected to the external grid. Additional equipment such as battery, thyristor-controlled reactor (TCR) and thyristor-switched capacitor (TSC) are integrated to the DFIG. These devices are integrated to DC link, grid side and rotor side converters. The developed control scheme aims to achieve several purposes simultaneously including voltage compensation, damping fluctuations, regulating frequency, increasing resilience, and balancing the unbalanced time-varying loads. Each purpose is realized by designing a separated control loop on DFIG, battery and TCR-TSC. All the designated control loops are operated coordinately. The non-linear time-domain modelling and simulations are carried out in MATLAB software and demonstrate that the proposed multi-purpose control plan can optimally utilize set of DFIG/battery/TCR/TSC and achieve all the objectives efficiently. [ABSTRACT FROM AUTHOR]