Search

Adjuvant chemotherapy is highly recommended for liver cancer to enhance survival rates due to its tendency to recur frequently. Localized drug-eluting implants have gained traction as an alternative to overcome the limitations of systemic chemotherapy. This work describes the development of biodegradable 3D printed (3DP) bilayer films loaded with 5-fluorouracil (5FU) and cisplatin (Cis) with different infill percentages where the 5FU layers were 40%, 30%, and 30% and Cis layers were 10%, 15%, and 10% for films A, B, and C, respectively. The relevant characterization tests were performed, and the drug content of films was 0.68, 0.50, and 0.50 mg of 5FU and 0.39, 0.80, and 0.34 mg of Cis for films A, B, and C, respectively. Cis release was affected by the alterations to the film design, where films A, B, and C showed complete release at 12, 14, and 23 days, respectively. However, 5FU was released over 24 h for all films. The films were stable for up to two weeks after storage at 25 °C/65% relative humidity and four weeks at 4 °C where drug content, tensile strength, FTIR, and thermal analysis results demonstrated negligible alterations. The cytotoxicity of the films was assessed by MTS assays using HepG2 cell lines demonstrating up to 81% reduction in cell viability compared to blank films. Moreover, apoptosis was confirmed by Western Blots and the determination of mitochondrial cell potential, highlighting the potential of these films as a promising approach in adjuvant chemotherapy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Conventional chemotherapies used for breast cancer (BC) treatment are non-selective, attacking both healthy and cancerous cells. Therefore, new technologies that enhance drug efficacy and ameliorate the off-target toxic effects exhibited by currently used anticancer drugs are urgently needed. Here we report the design and synthesis of novel mesoporous silica nanoparticles (MSNs) equipped with the hormonal drug tamoxifen (TAM) to facilitate guidance towards estrogen receptors (ERs) which are upregulated in breast tumours. TAM is linked to the MSNs using a poly-ʟ-histidine (PLH) polymer as a pH-sensitive gatekeeper, to ensure efficient delivery of encapsulated materials within the pores. XRD, HR-TEM, DLS, SEM, FT-IR and BET techniques were used to confirm the successful fabrication of MSNs. The MSNs have a high surface area (>1000 m 2 /g); and a mean particle size of 150 nm, which is an appropriate size to allow the penetration of premature blood vessels surrounding breast tumours. Successful surface functionalization was supported by FT-IR, XPS and TGA techniques, with a grafting ratio of approximately 29%. The outcomes of this preliminary work could be used as practical building blocks towards future formulations.

Stents are currently the primary choice for the treatment of both vascular and non-vascular occlusions and/or stenosis. Despite the proven history of clinical safety and efficacy, the benefit of traditional vascular or non-vascular stenting is often limited by in-stent restenosis, resulting in failure of existing stent or reintervention by use of another stent. Coronary drug-eluting stents (DESs) significantly reduce restenosis of vascular stents and have revolutionised the percutaneous coronary intervention (PCI) treatment in coronary stenting patients. Following the similar concept of coronary DESs, non-vascular DESs are being investigated to reduce non-vascular restenosis caused by tumour growth, enhance stenting functions, and increase their effectiveness in the treatment of obstructive gastrointestinal (GI) cancers. This article summarises and updates the outcomes of preclinical and clinical studies on non-vascular DESs for localised management of malignant GI obstructions with emphasis on fabrication techniques and regulatory requirements relevant to development and marketing approval., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Enhancing cytosol delivery of exogenous antigens in antigen presenting cells can improve cross-presentation and CD8+ T cell-mediated immune response. The antigen cytosol delivery speed, which has great importance on the rate of MHC class I molecules (MHC I) antigen presentation pathway and cytotoxic T lymphocytes (CTLs) induction, has not been well studied. We hypothesized that micelle-tailored vaccine with multiple cascaded lysosomal responsive capabilities could accelerate lysosomal escape and enhance cancer immunotherapy. To test our hypothesis, we created a novel micellar cancer vaccine (ovalbumin-loaded pH/redox dual-sensitive micellar vaccine, OLM-D) by cleavable conjugation of an antigen with house-made amphiphilic poly(l-histidine)-poly(ethylene glycol) (PLH-PEG) in current study. OLM-D was supposed to achieve cascade cytosol delivery of ovalbumin through three steps in terms of (i) initial redox triggered ovalbumin release, (ii) promoted proton inflow and micelle disassembly, and (iii) speeded proton sponge effect and lysosome bulging/broke. Redox-sensitive antigen release and consequently accelerative OLM-D disassembly were confirmed by sodium dodecylsulphate polyacrylamide gel electrophoresis (SDS-PAGE), transmission electronic microscopy (TEM), particle sizes, zeta potentials, and in vitro Ova release evaluation. The speeded cytosol delivery of ovalbumin was visualized under a confocal laser scanning microscope (CLSM). The ability of OLM-D to increase the MHC I molecule combination rate and antigen cross-presentation efficiency was identified by antigen presentation assay and maturation assay in bone marrow-derived dendritic cells (BMDCs). In vivo, the capability of OLM-D to accumulate in draining lymph nodes (LNs) after injection was visualized by real-time near infrared fluorescence imaging (NIRF) and the distribution order in different LNs was first observed (a, d, c, b). Enhanced cancer immunity of OLM-D was confirmed by increased CD3+CD8+ T cell quantity, CD3+CD8+25D11.6+ T cells quantity, and IFN-γ, IL-2 secretion post subcutaneous or intraperitoneal injection ( p < 0.05). Taken together, our results indicated that OLM-D provided a promising cascade cytosol delivery strategy, which held great potential to guide further design of nano-particulate cancer vaccines for efficient cancer immunotherapy.

Combinational nanomedicine is becoming a topic of much interest in cancer therapy, although its translation into the clinic remains extremely challenging. One of the main obstacles lies in the difficulty to efficiently co-deliver immiscible hydrophilic/hydrophobic drugs into tumor sites. The aim of this study was to develop co-loaded lipid emulsions (LEs) to co-deliver immiscible hydrophilic/hydrophobic drugs to improve cancer therapy and to explore the co-delivery abilities between co-loaded LEs and mixture formulation. Multiple oxaliplatin/irinotecan drug-phospholipid complexes (DPCs) were formulated. Co-loaded LEs were prepared using DPC technique to efficiently encapsulate both drugs. Co-loaded LEs exhibited uniform particle size distribution, desired stability and synchronous release profiles in both drugs. Co-loaded LEs demonstrated superior anti-tumor activity compared with the simple solution mixture and the mixture of single-loaded LEs. Furthermore, co-loaded nanocarriers could co-deliver both drugs into the same cells more efficiently and exhibited the optimized synergistic effect. These results indicate that co-loaded LEs could be a desired formulation for enhanced cancer therapy with potential application prospects. The comparison between co-loaded LEs and mixture formulation is significant for pharmaceutical designs aimed at co-delivery of multiple drugs., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

The aim of this study was to develop an in vitro release model for intramammary drug delivery system (IMDS) evaluation. This study was the first to establish an in vitro-in vivo correlation with investigation of an IMDS containing lasalocid. Three different methods including the standard United States Pharmacopeia dissolution method with apparatus 2, a modified United States Pharmacopeia method using a dialysis bag, or a specifically designed enhancer cell system, were assessed for the release study. Full cream milk and water were selected as the release media. In vivo evaluation was carried out by administering lasalocid IMDS into the udder of lactating Holstein dairy cows. Milk samples were collected and analyzed at selected time points after treatment. Dissolution data were fitted to various kinetic models. The results indicated that the release rate of lasalocid from IMDS was controlled by factors other than diffusion, which could include the sedimentation of lasalocid to the interface and the wetting of lasalocid particles by water at the interface of oil in the formulation and release media. The results obtained in vivo and in vitro were consistent. The in vitro assessment supports formulation design for early stage development and potentially for in vivo performance analysis., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

The present review discusses the pharmaceutical impact of the anatomy and physiology of the canine gastrointestinal tract to provide a comprehensive guide to the theories and challenges associated with the development of oral drug delivery systems for dogs. Novel pharmaceutical technologies applied to veterinary drugs are discussed indicating the advantages and benefits for animals. There are currently immense research and development efforts being funneled into novel canine health products. Such products are being used to overcome limitations of drugs that display site-dependent absorption or possess poor biopharmaceutical properties. Techniques that are employed to increase bioavailability of the Biopharmaceutics Classification System class II drugs are discussed in this article. Furthermore, an overview of palatable oral formulations for dog care is provided as an approach to easy administration. In vitro and in vivo evaluation and correlation of oral drug formulations in dogs are also addressed. This article assesses the outlook of canine oral drug development recognizing substantial growth forecasts of the dog care market., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Objectives: The aim of this study was to assess the potential of a novel delivery device for administering drugs that suffer from a high degree of first-pass metabolism., Methods: A tri-layered buccal mucoadhesive patch, comprising a medicated dry tablet adhered to a mucoadhesive film, was prepared and characterized by its physicochemical properties and mucoadhesive strength. Nicotine was used as a model drug for the characterization of drug release and drug permeation. The influence of different adsorbents on the release of nicotine base from the patches was evaluated in vitro. Different molecular forms of nicotine (base and complex salt) were evaluated for their effect on release performance and permeation in vitro., Key Findings: Results demonstrated acceptable physicochemical and mucoadhesive properties for the tri-layered patch. Rapid release of nicotine was observed when nicotine base was incorporated with calcium sulfate dihydrate as the adsorbent. Patches incorporating nicotine base showed distinct advantages over those containing nicotine polacrilex, in terms of drug release (complete drug release achieved at 30 vs 60 min) and transmucosal permeation (37.28 ± 4.25 vs 2.87 ± 0.26% of the dose permeating through mucosa within 120 min)., Conclusions: The novel tri-layered patch can effectively adhere to, and deliver an active ingredient through the buccal mucosa, confirming its potential for buccal mucoadhesive drug delivery., (© 2011 The Authors. JPP © 2011 Royal Pharmaceutical Society.)

Background: A microemulsion is an effective formulation for improving the oral bioavailability of poorly soluble drugs. In this paper, a water-in-oil (w/o) microemulsion was investigated as a system for enhancing the oral bioavailability of Biopharmaceutic Classification System (BCS) III drugs., Methods: The microemulsion formulation was optimized using a pseudoternary phase diagram, comprising propylene glycol dicaprylocaprate (PG), Cremophor(®) RH40, and water (30/46/24 w/w)., Results: The microemulsion increased the oral bioavailability of hydroxysafflor yellow A which was highly water-soluble but very poorly permeable. The relative bioavailability of hydroxysafflor yellow A microemulsion was about 1937% compared with a control solution in bile duct-nonligated rats. However, the microemulsion showed lower enhanced absorption ability in bile duct-ligated rats, and the relative bioavailability was only 181%. In vitro experiments were further employed to study the mechanism of the enhanced effect of the microemulsion. In vitro lipolysis showed that the microemulsion was digested very quickly by pancreatic lipase. About 60% of the microemulsion was digested within 1 hour. Furthermore, the particle size of the microemulsion after digestion was very small (53.3 nm) and the digested microemulsion had high physical stability. An everted gut sac model demonstrated that cumulative transport of the digested microemulsion was significantly higher than that of the diluted microemulsion., Conclusion: These results suggested that digestion of the microemulsion by pancreatic lipase plays an important role in enhancing oral bioavailability of water-soluble drugs.

Poorly water-soluble drugs, such as phenylephrine, offer challenging problems for buccal drug delivery. In order to overcome these problems, particle size reduction (to the nanometer range) and cyclodextrin complexation were investigated for permeability enhancement. The apparent solubility in water and the buccal permeation of the original phenylephrine coarse powder, a phenylephrine-cyclodextrin complex and phenylephrine nanosuspensions were characterized. The particle size and particle surface properties of phenylephrine nanosuspensions were used to optimize the size reduction process. The optimized phenylephrine nanosuspension was then freeze dried and incorporated into a multi-layered buccal patch, consisting of a small tablet adhered to a mucoadhesive film, yielding a phenylephrine buccal product with good dosage accuracy and improved mucosal permeability. The design of the buccal patch allows for drug incorporation without the need to change the mucoadhesive component, and is potentially suited to a range of poorly water-soluble compounds.

Non-melanoma skin cancer (NMSC) is the most prevalent malignancy worldwide, with approximately 6.3 million new cases worldwide in 2019. One of the key management strategies for NMSC is a topical treatment usually utilised for localised and early-stage disease owing to its non-invasive nature. However, the efficacy of topical agents is often hindered by poor drug penetration and patient adherence. Therefore, various research groups have employed advanced drug delivery systems, including topical patches to overcome the problem of conventional topical treatments. This review begins with an overview of NMSC as well as the current landscape of topical treatments for NMSC, specifically focusing on the emerging technology of topical patches. A detailed discussion of their potential to overcome the limitations of existing therapies will then follow. Most importantly, to the best of our knowledge, this work unprecedentedly combines and discusses all the current advancements in innovative topical patches for the treatment of NMSC. In addition to this, the authors present our insights into the key considerations and emerging trends in the construction of these advanced topical patches. This review is meant for researchers and clinicians to consider utilising advanced topical patch systems in research and clinical trials toward localised interventions of NMSC. [ABSTRACT FROM AUTHOR]

Parkinson's disease (PD) has significantly affected a large proportion of the elderly population worldwide. According to the World Health Organization, approximately 8.5 million people worldwide are living with PD. In the United States, an estimated one million people are living with PD, with approximately 60,000 new cases diagnosed every year. Conventional therapies available for Parkinson's disease are associated with limitations such as the wearing-off effect, on-off period, episodes of motor freezing, and dyskinesia. In this review, a comprehensive overview of the latest advances in DDSs used to reduce the limitations of current therapies will be presented, and both their promising features and drawbacks will be discussed. We are also particularly interested in the technical properties, mechanism, and release patterns of incorporated drugs, as well as nanoscale delivery strategies to overcome the blood–brain barrier. [ABSTRACT FROM AUTHOR]

While the global market for veterinary products has been expanding rapidly, there is still a lack of specialist knowledge of equine pharmaceutics. In many cases, the basic structure of the gastrointestinal tract (GIT) and integumentary system of the horse shares similarities with those of humans. Generally, the dosage form developed for humans can be repurposed to deliver equine medications; however, due to physiological variation, the therapeutic outcomes can be unpredictable. This is an area that requires more research, as there is a clear deficiency in literature precedence on drug delivery specifically for horses. Through a careful evaluation of equine anatomy and physiology, novel drug delivery systems (NDDSs) can be developed to adequately address many of the medical ailments of the horse. In addition to this, there are key considerations when delivering oral, topical, and parenteral drugs to horses, deriving from age and species variation. More importantly, NDDSs can enhance the duration of action of active drugs in animals, significantly improving owner compliance; and ultimately, enhancing the convenience of product administration. To address the knowledge gap in equine pharmaceutical formulations, this paper begins with a summary of the anatomy and physiology of the equine gastrointestinal, integumentary, and circulatory systems. A detailed discussion of potential dosage-form related issues affecting horses, and how they can be overcome by employing NDDSs is presented. [ABSTRACT FROM AUTHOR]

Functionalized nanoparticles have played a major role in the field of targeted therapy, owing to their ability to control the release and for the selective delivery of entrapped materials to tumours. In this work, we described the loading capacity and in vitro release kinetics of mesoporous silica nanoparticles (MSNs), functionalized with Poly-L-Histidine and Tamoxifen. The model drug Doxorubicin (DOX) was successfully encapsulated into MSN-based systems, using the technique of solvent immersion. A post-surface grafting loading method was investigated on functionalized systems, with DOX loading content determined using HPLC. Dialysis bag diffusion was employed to investigate the release kinetics of DOX-loaded-systems at pH 7.4 and 5. The amount of DOX released from native MSNs systems over a 72 h period at pH 5 was approximately 40%; and at pH 7.4 ≈ 30%. A moderate pH dependent release behaviour was observed with both our functionalized systems: DOX@MSN-PLH and DOX@MSN-PLH-TAM; with approximately 5% of DOX released from DOX@MSN-PLH-TAM at pH 7.4 and about 9% released at pH 7.4 over 72 h. The maximal cumulated release of DOX molecules from DOX@MSN-PLH after 72 h was ≈18% at pH 7.4 and ≈23% at pH 5, respectively. The outcome of this work offers a promising contribution towards building future stimuli-responsive nano-drug delivery systems. [ABSTRACT FROM AUTHOR]

The swine industry has evolved significantly in the recent decades, but this has come at considerable expense to piglet survival. Breeding sows for greater prolificacy has been accompanied by a greater proportion of piglets being born underweight, of lower vigor, and higher susceptibility to early mortality. Inducing sows to farrow during working hours has the potential to increase piglet survivability, but non-therapeutic injectable products are often discouraged on farms. We aimed to design and develop a novel vaginal drug delivery system (NVDDS) that could reliably trigger luteolysis and induce parturition. To achieve this, two vaginal tablets containing the luteolytic agent cloprostenol were formulated to be inserted together: one would release constituents immediately on insertion (immediate release; IR) and the other would release cloprostenol in a controlled manner (controlled release; CR). The two formulations (IR and CR) were evaluated for drug release, swelling and bio-adhesion in conditions simulating the sow vaginal environment. The IR tablet released the drug completely for 5 min whereas the CR tablet took 5 h to release 50% of the drug. Furthermore, the release kinetics were evaluated by fitting the dissolution profiles into different mathematical models. Both IR and CR tablets were best fitted by the Makoid–Banakar model which assumes release by summation of different mechanisms. The performance of the optimized formulations was studied in vivo with 161 Large White x Landrace sows of varying parity (0–5). The sows were assigned to five groups. Group 1 (SI) received a single vulval injection of cloprostenol at 0700 h (n = 32), group 2 (SDI) received the same dose split in two parts, at 0700h and 1300h (n = 33). Group 3 (IRT) animals were administered an IR tablet at 0700h (n = 32), while group 4 (IRCRT) received both IR and CR tablets at 0700 h (n = 33). Group 5 was untreated and served as a control (n = 32). The interval to farrowing was longer (p < 0.001) for controls than for treated sows, but there were no differences among cloprostenol treatments for timing of farrowing. The finding confirms the efficacy of the NVDDS for induction of farrowing in sows. [ABSTRACT FROM AUTHOR]

Inulin's unique and flexible structure, stabilization/protective effects, and organ targeting ability make it an excellent drug delivery carrier compared to other biodegradable polysaccharides. The three hydroxyl groups attached to each fructose unit serve as an anchor for chemical modification. This, in turn, helps in increasing bioavailability, improving cellular uptake, and achieving targeted, sustained, and controlled release of drugs and biomolecules. This review focuses on the various types of inulin drug delivery systems such as hydrogel, conjugates, nanoparticles, microparticles, micelles, liposomes, complexes, prodrugs, and solid dispersion. The preparation and applications of the different inulin drug delivery systems are further discussed. This work highlights the fact that modification of inulin allows the use of this polymer as multifunctional scaffolds for different drug delivery systems. [ABSTRACT FROM AUTHOR]

As a variety of novel technologies, 3D printing has been considerably applied in the field of health care, including cancer treatment. With its fast prototyping nature, 3D printing could transform basic oncology discoveries to clinical use quickly, speed up and even revolutionise the whole drug discovery and development process. This literature review provides insight into the up-to-date applications of 3D printing on cancer research and treatment, from fundamental research and drug discovery to drug development and clinical applications. These include 3D printing of anticancer pharmaceutics, 3D-bioprinted cancer cell models and customised nonbiological medical devices. Finally, the challenges of 3D printing for cancer applications are elaborated, and the future of 3D-printed medical applications is envisioned. [ABSTRACT FROM AUTHOR]

A novel drug delivery system preventing Glioblastoma multiforme (GBM) recurrence after resection surgery is imperatively required to overcome the mechanical limitation of the current local drug delivery system and to offer personalised treatment options for GBM patients. In this study, 3D printed biodegradable flexible porous scaffolds were developed via Fused Deposition Modelling (FDM) three-dimensional (3D) printing technology for the local delivery of curcumin. The flexible porous scaffolds were 3D printed with various geometries containing 1, 3, 5, and 7% (w/w) of curcumin, respectively, using curcumin-loaded polycaprolactone (PCL) filaments. The scaffolds were characterised by a series of characterisation studies and in vitro studies were also performed including drug release study, scaffold degradation study, and cytotoxicity study. The curcumin-loaded PCL scaffolds displayed versatile spatiotemporal characteristics. The polymeric scaffolds obtained great mechanical flexibility with a low tensile modulus of less than 2 MPa, and 4 to 7-fold ultimate tensile strain, which can avoid the mechanical mismatch problem of commercially available GLIADEL wafer with a further improvement in surgical margin coverage. In vitro release profiles have demonstrated the sustained release patterns of curcumin with adjustable release amounts and durations up to 77 h. MTT study has demonstrated the great cytotoxic effect of curcumin-loaded scaffolds against the U87 human GBM cell line. Therefore, 3D printed curcumin-loaded scaffold has great promise to provide better GBM treatment options with its mechanical flexibility and customisability to match individual needs, preventing post-surgery GBM recurrence and eventually prolonging the life expectancy of GBM patients. [ABSTRACT FROM AUTHOR]

Breast cancer (BC) is one of the leading causes of death from cancer in women; second only to lung cancer. Tamoxifen (TAM) is a hydrophobic anticancer agent and a selective estrogen modulator (SERM), approved by the FDA for hormone therapy of BC. Despite having striking efficacy in BC therapy, concerns regarding the dose-dependent carcinogenicity of TAM still persist, restricting its therapeutic applications. Nanotechnology has emerged as one of the most important strategies to solve the issue of TAM toxicity, owing to the ability of nano-enabled-formulations to deliver smaller concentrations of TAM to cancer cells, over a longer period of time. Various TAM-containing-nanosystems have been successfully fabricated to selectively deliver TAM to specific molecular targets found on tumour membranes, reducing unwanted toxic effects. This review begins with an outline of breast cancer, the current treatment options and a history of how TAM has been used as a combatant of BC. A detailed discussion of various nanoformulation strategies used to deliver lower doses of TAM selectively to breast tumours will then follow. Finally, a commentary on future perspectives of TAM being employed as a targeting vector, to guide the delivery of other therapeutic and diagnostic agents selectively to breast tumours will be presented. [ABSTRACT FROM AUTHOR]

Inulin-based hydrogels are useful carriers for the delivery of drugs in the colon-targeted system and in other biomedical applications. In this project, inulin hydrogels were fabricated by crosslinking oxidized inulin with adipic acid dihydrazide (AAD) without the use of a catalyst or initiator. The physicochemical properties of the obtained hydrogels were further characterized using different techniques, such as swelling experiments, in vitro drug release, degradation, and biocompatibility tests. The crosslinking was confirmed with Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). In vitro releases of 5-fluorouracil (5FU) from the various inulin hydrogels was enhanced in acidic conditions (pH 5) compared with physiological pH (pH 7.4). In addition, blank gels did not show any appreciable cytotoxicity, whereas 5FU-loaded hydrogels demonstrated efficacy against HCT116 colon cancer cells, which further confirms the potential use of these delivery platforms for direct targeting of 5-FU to the colon. [ABSTRACT FROM AUTHOR]

Abstract Smart hydrogels with pH and enzyme triggered release suitable for colon specific drug delivery were prepared by crosslinking inulin with pyromellitic dianhydride (PMDA) in a simple one pot synthesis. Back titration, Fourier transform infrared spectroscopy (FTIR) and ultraviolet spectrophotometry (UV) demonstrated that the hydrogel crosslinking reaction resulted in ester linkages and carboxylic acid groups and that the amount of the crosslinker in the hydrogel increased with increasing PMDA concentration in the crosslinking reaction. Thermal analysis and scanning electron microscopy (SEM) confirmed the chemical change by illustrating the hydrogels changed thermal properties and appearance compared to inulin. This hydrogel showed excellent swelling in water and the degree of swelling was inversely proportional to the cross-linking density, as determined using Flory-Rehner theory. Due to the presence of the carboxylic acid groups in the structure, the swelling was pH dependent, with significantly reduced swelling as acidity decreased from pH 7.4 to pH 1.2. Highlights • Novel hydrogel was obtained by esterification reaction between inulin and PMDA • The synthesized hydrogel were characterized using different analytical techniques and swelling experiment • By varying the ratio of PMDA, hydrogels with different crosslink density can be obtained • Hydrogels demonstrated pH dependent swelling [ABSTRACT FROM AUTHOR]

Abstract: We report on a porous silica–lipid hybrid microcapsule (SLH) oral delivery system for indomethacin fabricated from Pickering emulsion templates, where the drug forms an electrostatic complex with cationic lipid present in the oil phase. Dry SLH microcapsules prepared either by spray drying (∼1–5µm) or phase coacervation (20–50µm) exhibit a specific internal porous matrix structure with pore diameters in the range of 20 to 100nm. Dissolution studies under sink conditions and in the presence of electrolytes revealed a decreased extent of dissolution; this confirms the lipophilic nature the drug–lipid complex and its location in the oil phase. Orally dosed in - vivo studies in rats showed complete drug absorption and statistically higher fasted state bioavailability (F) (p <0.05) in comparison to aqueous suspensions and o/w submicron emulsions of indomethacin. It is postulated that the SLH microcapsules improve oral absorption via complete solubilisation of drug–lipid electrostatic complexes during enzymatic lipolysis in the GI track. [Copyright &y& Elsevier]

Flightless I (Flii) is an actin remodeling protein important for cytoskeletal regulation and cellular processes including migration, proliferation, and adhesion. Previous studies have clearly identified Flii as a novel therapeutical target for improved wound repair and have demonstrated Flii regulation using Flii neutralizing antibodies (FnAb) in different models of wound healing in vivo . Here we describe the development of an optimized topical delivery system that can neutralize Flii activity in the epidermis. Topical delivery of FnAb is an attractive approach as it provides a convenient application, sustained release, localized effect, and reduced dosage. Three successful formulations were developed, and their physical and chemical stability examined. The in vitro release revealed prolonged and sustained release of FnAb in all the tested formulations. Additionally, penetration studies using intact porcine skin showed that FnAb penetrated the epidermis and upper papillary dermis. The penetrated FnAb significantly reduced Flii expression compared to dosed matched IgG controls. This study has successfully developed a topical delivery system for FnAb that could serve as a potential platform for future localized wound treatments. [ABSTRACT FROM AUTHOR]

[Display omitted] • pH is vital for the normal functioning of the body. • Drug targeting has been widely used to increase efficacy and reduce adverse effects. • pH variation in different tissues and change in pH in some diseased tissues has been used as an opportunity to deliver drugs. • pH-responsive drug delivery is an attractive platform for targeted drug delivery. Physiologic pH is vital for the normal functioning of tissues and varies in different parts of the body. The varying pH of the body has been exploited to design pH-sensitive smart oral, transdermal and vaginal drug delivery systems (DDS). The DDS demonstrated promising results in hard-to-treat diseases such as cancer and Helicobacter pylori infection. In some cases, a change in pH of tissues or body fluids has also been employed as a useful diagnostic biomarker. This paper aims to comprehensively review the development and applications of pH-sensitive DDS as well as recent advances in the field. [ABSTRACT FROM AUTHOR]

Drug combinations are widely employed in chemotherapy for colorectal cancer treatment. However, traditional cocktail combination in clinic causes the uncertainty of the treatment, owing to varying pharmacokinetics of different drugs. The aim of this study was to design co-loaded liposomes to achieve the synchronised delivery and release. Oxaliplatin and irinotecan hydrochloride, as one of recommended combination schemes for the treatment of colorectal cancer in clinic, were co-loaded into the liposomes. The particle sizes of the liposomes were < 200 nm with uniform size distribution. In vitro release study showed that both drugs could be synchronously released from the liposomes, which means the optimized synergistic ratio of two drugs could be achieved. In vitro cellular uptake revealed that co-loaded liposomes could efficiently deliver different drugs into the same cells, indicating their potential as carriers for enhancing the cancer therapy. CLSM images of cryo-sections for in vivo co-delivery study also revealed that co-loaded liposomes had superior ability to co-deliver both the cargoes into the same tumor cells. Besides, in vivo NIRF imaging indicated that the liposomes could increase the drug accumulation in tumor compared with free drug. In vitro cytotoxicity evaluation demonstrated that co-loaded liposomes exhibited higher cytotoxicity than the mixture of single loaded liposomes in both CT-26 and HCT-116 cells. Furthermore, co-loaded liposomes also presented superior anti-tumor activity in CT-26 bearing BALB/c mice. In vivo safety assessment demonstrated that liposomes had lower toxicities than their solution formulations. These results indicated that oxaliplatin and irinotecan hydrochloride co-loaded liposomes would be an efficient formulation for improving colorectal cancer therapy with potential clinical applications. [ABSTRACT FROM AUTHOR]

In this paper, we successfully synthesized folate-modified pH-sensitive copolymer methoxy-poly(ethylene glycol) 2K -poly(ε-caprolactone) 4K -poly(glutamic acid) 1K (mPEG 2K -PCL 4K -PGA 1K -FA), which could form the polymeric assembly in an aqueous solution, for co-delivering hydrophilic drugs doxorubicin hydrochloride (DOX) and verapamil hydrochloride (VER) (FA-poly(DOX+VER)). Since VER was an effective P-glycoprotein inhibitor, the combination of DOX and VER could reverse the multidrug resistance efficiently and enhance the therapeutic effect. Therefore, the inhibition ratios of MCF-7/ADR resistant cancer cell treated by FA-poly (DOX+VER) were almost more than 30% higher than those of FA-polyDOX after 48 h and 72 h. Furthermore, the conjugation of FA could lead the co-delivery systems actively targeting into the FA receptor over-expressing cancer cells in addition to the passive accumulation of the assembly in tumor tissues. Importantly, the prepared mPEG 2K -PCL 4K -PGA 1K -FA assembly showed high pH-sensitive property, which made the drugs mostly released in tumor tissue (acid environment) than in physiological environment (neutral environment). In summary, the as-prepared co-delivery system FA-poly(DOX+VER) demonstrated a high efficiency in reversing the multidrug resistance and targeting FA receptor to improve the anticancer effect of DOX in MCF-7/ADR resistant cells. [ABSTRACT FROM AUTHOR]