Search

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

Changes in ecosystems after the removal of stress provide a rich source of information for conservation science. We used a long-term regional data set on the performance of white sucker (Catostomus commersonii) collected before and after the closure of a pulp mill to explore recovery in fish. Physiological indicators, including liver enzymes and plasma steroids, showed some compelling changes after the closure of the mill consistent with reduced exposure to pulp mill effluent but did not unequivocally demonstrate recovery. However, persistent signals in these fish may indicate effects of impoundment or discharge of sewage. We also used quantile regression with environmental covariates and bootstrap iteration to determine if systematic variation remained in relative body weight, liver weight, and gonad weight. In fish formerly exposed to pulp mill effluent, we found evidence of improvements (male gonad weight and liver weight of males and females), degradation (gonad weight of females), and no change (body weight). Although the observed patterns may be associated with closure of the mill, some differences were also found at regional locations, suggesting roles of additional stressors and challenging the clear association of change at the Mattagami River exposure site with the closure of the mill. However, fish captured at this location show responses consistent with regional locations, suggesting no residual impacts and highlights the challenges of identifying changes in fish even after large and known interventions. Environ Toxicol Chem 2021;40:162-176. © 2020 SETAC.

Temporal and spatial patterns of variability in aquatic ecosystems can be complex and difficult to quantify or predict. However, understanding this variability is critical to making a wide range of water quality assessment and management decisions effectively. Here we report on the nature and magnitude of spatial and temporal variation observed in conductivity, total phosphorus, and total nitrogen during a 15-year study of four U.S. stream systems receiving pulp and paper mill effluent discharges. Sampling locations included mainstem sites upstream and downstream of effluent discharge, as well as tributary sites. In all four stream systems, variability in conductivity as measured by the coefficient of variation was typically in the range of 10-50%, and was as low or lower than the variability in nutrient endpoints. The effect of effluent discharge was relatively minor overall, except in some site-specific instances. Some relatively large differences between tributary and mainstem variability were also observed. Flow variation tended to have a more consistent and larger effect on conductivity variation compared to the nutrient endpoints. After removing flow effects, significant relatively complex trends over time were observed at several sites. Changes in variability during the study also were observed. This paper highlights the importance of long-term studies to accurately characterize water quality variability used in water quality management decision-making.

Purpose Since bacterial pollution is more troublesome than other nonbiologic air pollutants, the need to control airborne micro-organisms has led to renewed interest in filter media for air filtration in indoor environments. Although mechanical filtration of aerosols by HEPA systems is the most common method for particle removal, these filters characterized by high efficiency usually reveal a higher drop in pressure and noise and are very expensive. On this basis, we aimed to develop novel, very effective air filters for removal of airborne bacteria from confined environments. Methods Parallelepiped filters surrounded by a cardboard frame were manufactured by aligning strips of corrugated cardboard and were assessed in terms of airflow rate reduction. Cardboard filters were soaked in isopropanol or used untreated in in vitro experiments for assessment of their antibacterial effect against E. coli and in a testing chamber for assessment of airborne bacterial removal. The surface morphology of cardboard specimens was also investigated by Scanning Electron Microscopy (SEM). Results Cardboard filters determined a very low decrease in airflow rate. Although specimens showed no antimicrobial behavior, untreated filters showed a maximum of 77% abatement of the airborne bacteria and the alcohol treatment of filters further increased their effectiveness by 14% probably because of their more convoluted surface. Conclusions This work disclosed corrugated cardboard-based filters as promising tools for the air treatment of indoor environments because of their excellent microbial abatement properties. Moreover, cardboard is lightweight, inexpensive, and eco-friendly material, and corrugated cardboard-based air filters are very simple in shaping, mounting, and replacing existing ventilation systems.

Despite the essential role of ecosystem goods and services in sustaining all human activities, they are often ignored in engineering decision making, even in methods that are meant to encourage sustainability. For example, conventional Life Cycle Assessment focuses on the impact of emissions and consumption of some resources. While aggregation and interpretation methods are quite advanced for emissions, similar methods for resources have been lagging, and most ignore the role of nature. Such oversight may even result in perverse decisions that encourage reliance on deteriorating ecosystem services. This article presents a step toward including the direct and indirect role of ecosystems in LCA, and a hierarchical scheme to interpret their contribution. The resulting Ecologically Based LCA (Eco-LCA) includes a large number of provisioning, regulating, and supporting ecosystem services as inputs to a life cycle model at the process or economy scale. These resources are represented in diverse physical units and may be compared via their mass, fuel value, industrial cumulative exergy consumption, or ecological cumulative exergy consumption or by normalization with total consumption of each resource or their availability. Such results at a fine scale provide insight about relative resource use and the risk and vulnerability to the loss of specific resources. Aggregate indicators are also defined to obtain indices such as renewability, efficiency, and return on investment. An Eco-LCA model of the 1997 economy is developed and made available via the web (www.resilience.osu.edu/ecolca). An illustrative example comparing paper and plastic cups provides insight into the features of the proposed approach. The need for further work in bridging the gap between knowledge about ecosystem services and their direct and indirect role in supporting human activities is discussed as an important area for future work.

To study the reliability between in vitro and in vivo data collected downstream 2 sewage treatment plants (STP) as well as from bleached kraft mill industry (BKME), 5 rivers (3 impacted and 2 references) were investigated in the Walloon region (southern of Belgium). For the in vitro part of the work, water samples were collected to measure the estrogenicity of the ‘out’ effluent compared to reference sample point by MCF-7 assay. Results indicated significant estrogenicity of effluents from STP and BKME and a weak estrogenicity in reference sites. However, estradiol equivalents (EEQ) estimated into rivers were probably too low to impact wild population. Chemical analysis of 13 compounds of interest indicated that extraction procedure used in this study gave low recoveries of estrogen-like xenobiotics, leading to probably under-estimated MCF-7 responses. Surprisingly, a full scan mode has revealed an unexpected compound in the sample of BKME which was: 7-isopropyl-1,1,4a-trimethyl-1,2,3,4a,9,10,10a-octahydrophenanthrene, a product of pulp mill manufacture. In parallel to in vitro, in vivo assessment of estrogenic impact of effluent was followed on the gudgeon (Gobio gobio). Samples were achieved during 2 different periods of the reproductive cycle, resting period (RP) and pre-spawning period (pSP). Unspecific physiological parameters to estrogenic exposure (gonadosomatic index and systematic testis cell counting) displayed no significant differences related to endocrine disruption of the reproductive tract, only differences were correlated with the reproductive state of fish (RP versus pSP). Concerning the potent biomarker of estrogen exposure, vitellogenin (vtg), only basal induction was revealed but not related to estrogenic exposure. Nevertheless, vtg over-expression was found for male fish presenting a feminization of the reproductive tract captured downstream the STP station of Wegnez in the Vesdre River. Intersexuality, another indicator of the estrogenicity impact in fish, was observed in every site. Actually, ovotestis was systematically formed by protoplasmic oocyte observed in low percentage in every group analysed (impacted and references). Moreover, in fish captured in Wegnez, oocyte diameter was significantly higher compared to the other groups. In this study, only moderate to none impact in population of gudgeon was noticed. Moreover, in this case no discrepancy between in vitro and vivo was viewed although both approaches revealed gaps in monitoring effluent incidence into the environment. We should remain careful in the interpretation when only partial approaches are used in order to characterize impact in the aquatic milieu.

The connections between forest products operations and water resources in the United States is considered and, where possible, quantified. Manufacture of wood, pulp, and paper products and the influences of forest management and forest products manufacture on water quality are discussed. Most fresh water in the US originates in forested areas. Responsible harvesting strategies, best management practices, and forest re-growth combine to minimize or eliminate changes in water availability and degradation of water quality due to harvesting. Relative to alternative land uses and large-scale disturbance events, forested areas produce the highest quality of fresh water. Water inputs for the manufacture of forest products total about 5.8 billion m3 per year, an amount equal about 0.4% of the surface and groundwater yield from timberland. Approximately 88% of water used in manufacturing is treated and returned directly to surface waters, about 11% is converted to water vapor and released during the manufacturing process, and 1% is imparted to products or solid residuals. Extensive study and continued monitoring of treated effluents suggest few or no concerns regarding the compatibility of current effluents with healthy aquatic systems.

The Cruces River, which is located in southwest Chile, suffered from dramatic changes after the opening of a large pulp mill in 2004. A large mass mortality of the vegetation occurred. In particular, the Brazilian elodea (Egeria densa), which is the main food source of many water birds in this ecosystem, disappeared. Because of this damage, different investigations took place and the goal of this research was a description of the water quality, including filtrate, suspended matter, and sediment. In this research, inorganic parameters were the main point of interest. Furthermore, finding relations between the sampling sites and the measured parameters by applying chemometric methods was another aim of this investigation. Water and sediment samples were collected from 19 sampling sites at the Cruces River in summer (February) 2007. Fifteen elements were analyzed by atomic spectroscopic methods in filtrate, suspended matter, and sediment. Furthermore, the dissolved organic carbon, humic acids, and microbiological parameters were examined. The quantitative description of the three different compartments indicates little influence of the pulp mill on the Cruces River. The comparison of the results with the Databank for Ecotoxicological Effect Data and Quality Targets illustrates the good quality of the water in the sanctuary. All quality targets, except for copper, are achieved. The amount of suspended matter increases with the beginning of the wetland. The multivariate statistical data analysis classifies the relations between the objects and variables. The influence of the sewage, which is blamed to be the reason for increased amount of suspended matter, cannot be evaluated by this investigation. The slight increase of the concentrations of the earth alkaline and alkaline metals might cause changes in the chemical equilibrium and, therefore, the amount of suspended matter increases. Applying cluster analysis separates sampling sites by the determination of similarities between these sampling sites by means of the variables. Space–time factor analysis revealed relations between the examined parameters. The sewage of the pulp mill is not significantly polluted by the analyzed parameters and a negative influence to the ecosystem cannot be proved. The impact of copper should be examined in further investigations. The Pichoy River, with high concentrations of iron in the filtrate, should be examined as well. Studies about the chemical equilibrium of iron and manganese oxides in relation to the alkaline and earth alkaline elements should take place.

Forty-one bacterial strains isolated from the headbox water of two machines in a Canadian paper mill were associated with the genera Asticcacaulis, Acidovorax, Bacillus, Exiguobacterium, Hydrogenophaga, Pseudomonas, Pseudoxanthomonas, Staphylococcus, Stenotrophomonas based on the sequence of their 16S rRNA genes. The metabolic profile of these strains were determined using Biolog EcoPlate, and the bacteria were divided into four metabolic groups. Metabolic profiles of the bacterial communities colonizing the headbox water of two paper machines was also determined weekly over a 1 year period. The only compound that was not reduced by the bacterial community was 2-hydroxybenzoic acid. Utilization frequency of the other carbon sources in the Biolog EcoPlate ranged from 3 to 100%. The metabolic profiles of the bacterial community did not vary considerably between the two paper machines. However, the metabolic profile varied among the sampling dates.

PubMedID: 26739011 This paper aimed to analyze short-term changes in landscape pattern that primarily results from building development in the east coast of Mersin Province (Turkey). Three sites were selected. Ikonos (2003) and Quickbird (2009) images for these sites were classified, and land cover transformations were quantitatively analyzed using cross-tabulation of classification results. Changes in landscape structure were assessed by comparing the calculated values of area/edge and shape metrics for the earlier and later dates. Area/edge metrics included percentage of land and edge density, while shape metrics included perimeter-area ratio, fractal dimension, and related circumscribing circle (RCC) metrics. Orchards and buildings were dominating land cover classes. Variations in patch edge, size, and shapes were also analyzed and discussed. Degradation of prime agricultural areas due to building development and implications of such development on habitat fragmentation were highlighted. © 2016, Springer International Publishing Switzerland.

A DNA microarray to monitor the expression of bacterial metabolic genes within mixed microbial communities was designed and tested. Total RNA was extracted from pure and mixed cultures containing the 2,4-dichlorophenoxyacetic acid (2,4-D)-degrading bacterium Ralstonia eutropha JMP134, and the inducing agent 2,4-D. Induction of the 2,4-D catabolic genes present in this organism was readily detected 4, 7, and 24 h after the addition of 2,4-D. This strain was diluted into a constructed mixed microbial community derived from a laboratory scale sequencing batch reactor. Induction of two of five 2,4-D catabolic genes ( tfdA and tfdC ) from populations of JMP134 as low as 10 5 cells/ml was clearly detected against a background of 10 8 cells/ml. Induction of two others ( tfdB and tfdE ) was detected from populations of 10 6 cells/ml in the same background; however, the last gene, tfdF , showed no significant induction due to high variability. In another experiment, the induction of resin acid degradative genes was statistically detectable in sludge-fed pulp mill effluent exposed to dehydroabietic acid in batch experiments. We conclude that microarrays will be useful tools for the detection of bacterial gene expression in wastewaters and other complex systems.

The turnover of phosphorus and nitrogen have been studied in a low salinity estuary in the Bothnian Sea. The estuary, Gårdsfjärden, has a high loading of nutrients from a pulp and paper mill which supplies the estuary with three times the annual natural input of phosphorus and nitrogen, respectively. The turnover of nutrients was to a great extent determined by hydrodynamic variations. During periods of intense resuspension there was a net export of particulate bound nutrients from the estuary to the sea but since these periods were short there was an overall net retention of particulate nutrients. The estuary was a source for dissolved phosphorus to the sea. The major source of phosphorus export was release of dissolved P from anoxic sediments. Gårdsfjärden was a sink for dissolved nitrogen which most likely escaped the estuary by denitrification. Nitrate was supplied by degradation of particulate organic nitroge'n but the main source was import from the sea.

This study compared the use of sentinel species- and community-based field approaches for assessing the biological status of fish living in a river receiving pulp and paper mill effluents. Three approaches were compared. Two approaches used sentinel species. One of these involved an internal/external examination of the fish that leads to the calculation of a fish health assessment index (HAI) and the other involved biochemical measurements of hepatic mixed function oxidase (MFO) activity and plasma steroid levels. The third approach characterized the fish community structure according to an index of biotic integrity (IBI). The comparison focused on how the methods respond to the hypothesis that recent process modifications/effluent treatment changes, resulting in demonstrable improvements in effluent quality, have beneficial effects on fish. Neither of the approaches using sentinel fish indicated clear mill-related influences either before or after the process modifications/effluent treatment changes. There was no evidence of depressed plasma steroids and increased MFO activity in fish frequently associated with mill effluent exposure in previous studies. While the HAI was higher at stations downstream from two mills, this could not be linked to effluent exposure alone. In contrast, the study of community structure showed a substantial improvement in fish assemblages at all the mill sites.

The ability to differentiate functional and structural diversity of bacterial communities present in activated sludges adapted to elementally (ECF) and totally (TCF) chlorine-free bleaching effluents was evaluated. Community function was evaluated through substrate utilization patterns in BiologGN®microplates, and taxonomic structure was evaluated by fluorescent in situ hybridization using probes targeting the Eubacteria; the alpha, beta, and gamma subclasses of the Proteobacteria; and gram-positive bacteria with high GC content. Over 6-week sampling periods, ECF- and TCF-adapted sludge bacterial communities presented reproducible substrate utilization patterns that through principal components (PCs) analysis, separated the ECF samples from the TCF samples. Application of the fluorescent in situ hybridization technique was complicated by the intense autofluorescence of the bleaching effluent sludge samples that interfered with detection of specific hybridization signals. The most notable difference in community structure detected using the chosen set of probes was the relatively greater proportion of cells of the alpha subclass in TCF sludge (27%) than in ECF sludge (6%). Nonspecific hybridization with beta and gamma probes was relatively high, but both sludges appeared to have similar proportions of cells of the beta (20–22%) and gamma (11–12%) subclasses. The two sludges presented relatively few gram-positive cells with high GC content (

Coliform bacteria have long been used to indicate fecal contamination of water and thus a health hazard. In this study, the in-mill water and external effluent treatment systems of seven typical Canadian pulp and paper mills were all shown to support the growth of numerous coliforms, especially Klebsiella Spp., Escherichia coli, Enterobacter spp., and Citrobacter spp. In all mills and most sampled locations, klebsiellas were the predominant coliforms. Although all but one of the mills had no sewage input and most disinfected their feed (input) water, all contained the most typical fecal indicator bacterium, E. coli. Many of the mill coliforms were classified as fecal coliforms by standard ''MPN'' and metabolic tests, but this was shown to be due to their thermotolerance, not their origin. Mill coliforms were shown not to be just simple transients from feedwater or furnish (wood), but to be continuously growing, especially in some of the primary clarifiers. Isolated mill coliforms grew very well on a sterilized raw combined mill effluent. The fecal streptococci (enterococci), alternative indicators of fecal health hazards, were common in all mills in the absence of sewage. Ten strains of E. coli isolated from four mills were all shown to be non-toxigenic strains of harmless serotypes. No salmonellas were found. Therefore, the use of total coliform, fecal coliform, enterococci, or E. coli counts as indicators of fecal contamination, and thus of health hazard in pulp and paper mill effluents or biosolids (sludges) known to be free of fecal input is invalid. # 2001 Elsevier Science Ltd. All rights reserved

We investigated the bacterial community structure in an aerated plug-flow lagoon treating pulp and paper mill effluent. For this investigation, we developed a composite method based on analyses of PCR amplicons containing the ribosomal intergenic spacer (RIS) and its flanking partial 16S rRNA gene. Community percent similarity was determined on the basis of RIS length polymorphism. A community succession was evident in the lagoon, indicated by a progressive community transition through seven sample locations. The most abrupt changes in community structure were associated with a temperature change from 39 to 35°C and with increases in dissolved oxygen. The temporal differences in community structure, based on summer and winter samplings, were greater than the spatial differences during either season. Clone libraries of rDNA-RIS amplicons were constructed from each of three summer samples. Among 90 clones analyzed (30 clones from each sample), 56 phylotypes were distinguished by restriction fragment length polymorphism. Indices of phylotype richness, evenness, and diversity all increased in clone libraries from the beginning to the end of the lagoon. A representative clone of each phylotype was phylogenetically analyzed on the basis of its partial 16S rRNA gene sequence (ca. 450 bp). Phylogenetic analysis confirmed the increase in diversity and further indicated increasing richness of bacterial divisions. Pioneers in the community spatial succession appeared to include thermotolerant, microaerophilic methanol-oxidizing bacteria related to the genus Methylobacillus , as well as thermotolerant, microaerophilic nitrogen-fixing bacteria related to the genus Azospirillum .

The majority of pulp and paper mills now biotreat their combined effluents using activated sludge. On the assumption that their wood-based effluents have negligible fixed N, and that activated-sludge microorganisms will not fix significant N, these mills routinely spend large amounts adding ammonia or urea to their aeration tanks (bioreactors) to permit normal biomass growth. N 2 fixation in seven Eastern Canadian pulp and paper mill effluent treatment systems was analyzed using acetylene reduction assays, quantitative nitrogenase ( nifH ) gene probing, and bacterial isolations. In situ N 2 fixation was undetectable in all seven bioreactors but was present in six associated primary clarifiers. One primary clarifier was studied in greater detail. Approximately 50% of all culturable cells in the clarifier contained nifH , of which >90% were Klebsiella strains. All primary-clarifier coliform bacteria growing on MacConkey agar were identified as klebsiellas, and all those probed contained nifH . In contrast, analysis of 48 random coliform isolates from other mill water system locations showed that only 24 (50%) possessed the nifH gene, and only 13 (27%) showed inducible N 2 -fixing activity. Thus, all the pulp and paper mill primary clarifiers tested appeared to be sites of active N 2 fixation (0.87 to 4.90 mg of N liter −1 day −1 ) and a microbial community strongly biased toward this activity. This may also explain why coliform bacteria, especially klebsiellas, are indigenous in pulp and paper mill water systems.

The effect of irrigation by the effluent of paper industry versus well water on properties of soils in three seasons was studied in Nagpur district, Maharashtra. The effluent had high total dissolved salts and biological oxygen demand than well water. pH, EC and availability of N, P, K, Zn, Cu, Fe, Mn, Cd, Co, Cr, Ni, Pb, particularly in surface layer of paper industry effluent irrigated soil at different seasons found to increase compared to well water irrigated soils, but heavy metals (non-essential nutrients) were within the permissible limits.

We exposed fathead minnows (Pimephales promelas) to 7 concentrations of effluents from pulp mills at 4 Long-Term Receiving Water Study (LTRWS) sites. The primary objective of these investigations was to determine the potential for toxicity, particularly on fish reproduction, of the pulp mill effluents using laboratory tests. These tests were performed as LTRWS fish community assessments were being completed, thus results of the laboratory fish reproduction tests could be compared to in-stream fish community measurements. In general, bioindicators measured during the life-cycle tests, including gonadosomatic index (GSI), hepatosomatic index, condition factor, numbers of tubercles on heads of males and females, and gonadal histology did not show consistent patterns or dose response and did not predict effects on egg production. Gonadosomatic indexes and tubercles also did not indicate estrogenic or androgenic responses to the effluents during the life-cycle tests. The most consistently sensitive test endpoint showing a dose response was the 25% inhibition concentration (IC25) for egg production. Based on this endpoint all 4 effluents had effects on fish reproduction from 8% by volume to 100% effluent. However, in-stream effects on fish reproduction would not be expected based on these 4 life-cycle tests for any of the LTRWS stream sites. The mean effluent concentration in Codorus Creek, Pennsylvania, USA was approximately 32%, and the IC25 for the life-cycle test was 100% effluent, providing a margin of safety of approximately 3 times. The margins of safety at the other sites are much greater: 34 times for Leaf River, Mississippi, USA (IC25 = 69%, 2% mean receiving water concentration), 36 times for the McKenzie River, Oregon, USA (IC25 = 18%, 0.5% mean receiving water concentration), and 40 times for the Willamette River, Oregon, USA (IC25 = 8%, 0.2% mean receiving water concentration). Effects on fish numbers, diversity, and community structure due to the effluent were also not found during the LTRWS, which is consistent with these laboratory results. These findings indicate that in this case, when laboratory results combined with in-stream effluent concentrations suggest in-stream effects on fish population are not expected, the laboratory results are consistent with the in-stream observations. However, inferences about situations where laboratory results predict in-stream effects cannot be made from these data.

Nutrients in pulp and paper mill effluent (PPME) have been implicated in increased periphyton chlorophyll a (chl a) downstream of discharges. These findings are largely based on short-term studies conducted in artificial stream channels or mesocosms and often in oligotrophic systems, and it is unclear if long-term chl a patterns in higher-nutrient systems would show similar response. We conducted a long-term study of 4 receiving waters (Codorus Creek, Pennsylvania; the Leaf River, Mississippi; and the McKenzie and Willamette rivers, Oregon) in which periphyton samples and associated data on water quality (nitrogen and phosphorus concentrations, pH, color, and conductivity) and 2 physical habitat variables (depth and current velocity) were collected over an 8-y period from multiple sites upstream and downstream of PPME discharges. Study streams represented different ecoregions, warm- and coldwater systems, gradients of in-stream effluent concentration (

Changes in macroinvertebrate communities exposed to pulp and paper mill effluent (PPME) have been seen in mesocosm and short-term field studies. However, long-term patterns of macroinvertebrates in PPME receiving streams have not been examined. We conducted a study of 4 PPME receiving streams (Codorus Creek, PA; the Leaf River, MS; and the McKenzie and Willamette rivers, OR) over 9 y to assess temporal patterns in macroinvertebrate community structure and metrics related to PPME discharge. Study streams represented different ecoregions, warm-/cold-water systems, gradients of PPME concentration (1%-33%), and mill process types. Bray-Curtis similarity and nonmetric multidimensional scaling showed significant community differences across sites in Codorus Creek, but differences were related to stream temperature patterns and not PPME. In the other study streams, seasonal community differences across years were greater than differences across sites. General linear models were used to examine spatial and temporal variation in macroinvertebrate metric response (% dominant taxa, density, richness, Hilsenhoff Biotic Index [HBI], Simpson's Index, and ash-free dry mass). Mean HBI scores indicated that the macroinvertebrate community reflected fair to very good water quality conditions, with water quality typically classified as "good" at most sites. Significant site differences in macroinvertebrate metric response were uncommon in the Leaf, McKenzie, and Willamette rivers but were seen in all metrics in Codorus Creek, where metric response was spatially variable. In the McKenzie River, there was an increase in mean HBI scores at sites downstream of the mill relative to 1 of the 2 upstream sites. However, significant differences were seen only between 1 upstream and downstream site, and HBI scores at all downstream sites consistently reflected "good" water quality. Significant annual differences in metric response were typical in all rivers. Water quality (pH, conductivity, total nitrogen) and habitat (velocity, depth, substrate composition) variables explained community structure patterns in the Leaf and McKenzie rivers, but macroinvertebrate-environment relationships were weak in the other 2 streams. The results of this study indicate that macroinvertebrate community structure is temporally variable and reiterate the importance of long-term studies for accurate determination of the effects of point sources such as PPME on receiving systems.

Physiological changes have been seen in individual fish exposed to pulp and paper mill effluent (PPME), but it is unclear whether community-level changes are seen in fish in PPME receiving waters. We conducted a study of 4 PPME receiving streams (Codorus Creek, PA, USA), the Leaf River (Forrest and Perry Counties, MS, USA), and the McKenzie and Willamette rivers (Lane County, OR, USA) over 9 y to assess temporal patterns in the type and relative abundance of fish species and measures of community structure and function related to PPME discharge. We used boat and backpack electrofishing to sample large- and small-bodied fish from the McKenzie and Willamette rivers, boat electrofishing to sample large-bodied fish from the Leaf River, and backpack electrofishing to sample the entire fish community from Codorus Creek. Study streams represented different ecoregions, warm- and coldwater systems, gradients of PPME concentration (

Watershed characteristics, study streams, sample sites, mills, and mill effluents are provided for 4 streams included in a long-term study to assess potential effects of pulp and paper mill effluents on US receiving waters. The study streams are Codorus Creek (Pennsylvania, USA), Leaf River (Mississippi, USA) and McKenzie and Willamette rivers (Oregon, USA) and were chosen to represent a blend of mill process types, effluent concentrations, and coldwater/warmwater stream systems. The described effluent quality, water quality, and habitat data sets encompass the initial 7 to 8 y of a study anticipated to continue >10 y and provide a backdrop to a series of articles describing periphyton, macroinvertebrate, and fish community properties in these same streams. The mean in-stream waste concentration (IWC) for these 4 effluent discharges was 32.4%, 2.0%, 0.5%, and 0.2% v/v for Codorus Creek and Leaf, McKenzie, and Willamette rivers, respectively, as compared with a median of 0.4% for US mills. Effluent quality measurements included Selenastrum capricornutum, Ceriodaphnia dubia, and Pimephales promelas chronic bioassays as sanctioned by the US Environmental Protection Agency for estimating effluent effects on receiving-water aquatic communities. Based on mean bioassay inhibition concentration for a 25% effect and on mean IWC, a margin of safety against adverse biological effects of 2, 25, 137, and 150 times was indicated for Codorus Creek and Leaf, McKenzie, and Willamette rivers, respectively. Habitat and water quality assessment was carried out over a gradient of sample sites above and below the effluent discharge to determine nonmill-related conditions that might interfere with interpretation of effluent effects. Noneffluent related localized differences in conditions for some parameters, including current velocity (McKenzie River), and surface incident photosynthetically active radiation (Codorus Creek and Willamette River) occurred at the sample stations immediately upstream or downstream of the effluent discharge. In addition, broader watershed differences were evident on Codorus Creek, where a relatively rich riparian corridor and stream structure occurred upstream in contrast to areas of canopy and stream-structure loss in the downstream urban area. The mill effluent discharges contributed to increases in receiving-water color and conductivity, although upstream tributaries contributed additional conductivity to Codorus Creek and color to the Leaf River. The McKenzie River provided the only example of a nutrient increase immediately downstream of a mill discharge. This increase in total nitrogen (0.11 vs 0.16 mg/L) could not, however, be differentiated with respect to whether it was of mill effluent or tributary stream origin. Tributary streams were potentially important total nitrogen contributors on Codorus Creek and the Willamette River. As an integrated study, the effluent quality and physical/chemical watershed descriptions provided here represent 1 component of the broader study addressing potential point-source effluent effects within the context of the larger watershed and a multiyear timescale. The absence of effluent-related in-stream chemical/physical responses, other than increases in conductivity and color, and a considerable bioassay-based margin of safety, provides for a working hypothesis that there will be no effluent-related biological population/community responses from these 4 mill discharges. This hypothesis, as it relates to periphyton, macroinvertebrate, and fish communities, will be addressed in other articles in this series.

An industry-funded, long-term, receiving water study was initiated in 1998/1999 to adress questions about the potential effects of pulp and paper mill effluent discharges on US receiving waters. Although the study continues, the knowledge gained to date provides an opportunity to reflect on the study development process, its progress, and its outcomes. As a backdrop to a series of articles in this special issue describing study results, this article describes the process by which study information objectives were identified as well as the process by which the experimental design was developed. A review of past literature and research identified gaps in long-term population/community data about effluent effects and that, consequently, emerged as a primary information objective. The selected streams for study included 1) Codorus Creek (Pennsylvania, USA), 2) Leaf River (Mississippi, USA), 3) McKenzie River (Oregon, USA), and 4) Willamette River (Oregon) represent a blend of mill process types, coldwater and warmwater stream types, and a range of effluent concentrations. Measurements included numbers of periphyton, macroinvertebrate, and fish communities; the assessment of water and effluent quality; laboratory bioassays; and fish full-life-cycle assays. Information objectives included addressing natural variability and, consequently, the study included long-term temporal (>10 y) and watershed-scale spatial frameworks. Regional-scale ecological risk assessments were performed for each site that aided in placing each site in an ecological and regulatory context. An adaptive-management process is described that allowed for modifications over time as a result of lessons learned as the study progressed. Results from the initial 7 to 8 y of monitoring, as described in the series of articles in this special issue, provide a unique data set with respect to addressing point-source pulp and paper mill effluent discharge concerns and may serve as a template for others to use in developing monitoring or management programs to assess or address water quality conditions or concerns.

Lessons learned from the development, implementation, and initial 8 y of study findings from a long-term study to assess the effects of pulp and paper mill effluents on receiving waters are summarized as a conclusion to a series of articles (this issue) on study findings. The study, based on industry-defined information needs, was developed via a science-based experimental design into a long-term (>10 y) watershed-scale monitoring program that integrated in-stream population/community assessment, laboratory chronic bioassays, and fathead minnow full life-cycle assays as well as water quality and effluent quality monitoring and habitat assessment in addressing the presence of effluent effects. The 4 study streams (Codorus Creek, PA; Leaf River, MS; and the McKenzie and Willamette rivers, OR) represented both bleached and unbleached kraft mill processes and effluent concentrations that ranged from near typical for the United States (0.4%) to very high (Codorus Creek = 32%). Following 8 y of monitoring, the weight of evidence suggests an absence of biological differences at stations downstream of the mill discharges for periphyton or macroinvertebrates and, with the exception of 1 of 9 large-bodied fish and 1 of 7 small-bodied fish community structure metrics for 1 river (McKenzie), an absence of differences for fish communities. Laboratory bioassay and fathead minnow full-life cycle tests supported a substantial “margin of safety” in that, depending on the effluent, adverse responses did not occur until effluent concentrations were from 2 times to more than 150 times in-stream concentrations. The incorporation of a watershed spatial scale illustrated that each sample site tended to be unique over the 28 to 50 km monitored segments with respect to habitat and that knowledge of these variables permitted accurate evaluations of effluent effects. Similarly, the multiyear study framework provided information regarding the natural seasonal and year-to-year variability in fish communities and consequently a better understanding of how potential effluent effects signals could be expressed within this variability. The study incorporated an adaptive management strategy that provided for study design and monitoring modifications over time as a way of benefiting from practical experience and knowledge gained through time and to optimize the use of study resources. Results from this initial 8 y of monitoring, to our knowledge, represent the longest-known population/community-level assessment of the in-stream effects of pulp and paper mill effluents. Beyond the lessons learned with respect to effluent effects are those related to the design and conduct of long-term watershed-scale studies that may be of use to others in developing watershed assessment or management programs.

The recent disappearance of the aquatic plant Egeria densa, a Brazilian native invasive species, from a wetland in southern Chile prompted several efforts to unveil the origin of this phenomenon. Because these changes occurred by the time a newly built pulp mill started its operations in the area, a reasonable doubt for a cause-effect relationship is plausible. We implemented a mesocosm approach to directly evaluate the effect of treated pulp mill effluents (PMEs) on several growth-related parameters of E. densa as well as other primary producers. We hypothesize that effluent, at a dilution similar to that detected in the zone of the wetland where the negative environmental impacts were evident, has a significant negative effect on this aquatic plant as well as on other primary producers inside a mesocosm system. After a prolonged (months) exposure to both 0% PME with pure river water and a 4 to 5% (v/v) dilution of treated PME, no effect on E. densa was measured. Furthermore, plants exposed to effluent exhibited a significantly greater general growth rate. Coincidently, chlorophyll a concentration in the water column and periphyton biomass also changed over time, but without any pattern attributable to the effluent. Values of the autotrophic index obtained from the periphyton growth pattern did not suggest enrichment of the system with organic matter. Our results only refer to the direct effect of mill effluents on several biotic responses, but they represent an important advance toward generation of the scientific knowledge necessary to understand how the ecosystem functions while receiving this and other unquantified sources of water.

The capacity of a pilot project subsurface flow constructed wetland in the tropics to remove phenol from pre-treated pulp and paper mill wastewater was studied under varying hydraulic retention times (HRT) with batch loading. Initial 15 months results indicate that removal efficiencies for phenol were variable but on average reached 60% at 5-day HRT and 77% at 3-day HRT. It was thought that the longer retention time might have caused oxygen and nutrient deficiencies, which may have reduced removal performance. Although phenol was sometimes not detectable in the wetland outflow, on average values over the experimental period did not meet set national guidelines. In the ongoing study, the impact of varying hydraulic retention time and/or loading rate on the removal of phenols will be evaluated and the main removal process established.