Search

The proliferation of urbanization and the integration of new energy sources have stimulated the development of gas-insulated transmission lines and switchgear (GIL/GIS). In particular, the compact DC GIS in offshore converter platforms will significantly reduce footprints for DC switchyards, exhibit exceptional climatic resistance, and facilitate the cost-effective connection of remote offshore wind farms and submarine links. Nevertheless, insulators used in GIS/GIL always suffer from surface charge accumulation under DC stress, which could distort and enhance the local electric field and thus trigger a flashover at the gas–solid interface if it exceeds certain magnitude levels. This susceptibility becomes a major concern affecting the reliability of DC gas-insulated systems. Beyond these engineering-related challenges lie fundamental physics problems involving mechanisms of charge accumulation and charge-induced flashover which still require exploration. To this end, this paper presents an overview of recent advancements on this topic whilst highlighting relevant issues to be addressed. Specifically, the surface charge accumulation phenomena under DC fields are reviewed, and the charging mechanisms are summarized from macroscopic to microscopic perspectives. Further, the correlation between surface charge and surface flashover is discussed. Moreover, recent developments in tailoring methods for surface charging are also presented. Finally, perspectives are given on current research progress and future needs. [ABSTRACT FROM AUTHOR]

The gas mixture CO2–O2 has been considered as an insulation and arc-quenching medium in gas-insulated switchgears. In this paper, the dielectric breakdown properties of CO2–O2 mixtures at different O2 concentrations and gas pressures were studied theoretically by considering ion kinetics in a spatial–temporal growth avalanche model. A kinetic scheme that includes all the main reactions likely to occur in CO2–O2 mixtures is presented. An improved method to calculate the dielectric strength of the gas mixture is developed, based on an avalanche model that considers both spatial growth and temporal processes. Next, the reaction rates of ionization, attachment, detachment and ion conversion, the effective ionization Townsend coefficient αeff/N, and reduced critical electric field strength (E/N)cr in CO2–O2 mixtures at different mixing ratios and gas pressures are analyzed in detail. Finally, a pulsed Townsend experiment is performed to verify the validity and accuracy of the calculation method. Based on this, one detachment reaction rate is modified to yield more accurate results. Better consistency between the results and the experimental values supports the validity of the kinetic system, reaction rates, and the improved calculation method. [ABSTRACT FROM AUTHOR]

Recently, C4F7N mixtures have attracted attention as a promising SF6 alternative due to their low global warming potential and excellent electrical performance. In this study, we introduce a newly built experimental setup for pulsed Townsend measurements as well as the physical model for the acquisition of electron swarm parameters. The effective ionization rate coefficients, electron drift velocity, and density-normalized longitudinal diffusion coefficients in C4F7N and its mixtures with CO2 and N2 were obtained. The reduced critical electric field for pure C4F7N at 100 Pa is determined to be 1002 Td, while it decreases with increasing pressure because of the effect of ion kinetics during the discharge process. C4F7N shows good synergism with CO2 and N2. To have a dielectric strength equivalent to that of SF6, the mixing ratio of C4F7N in its mixtures with CO2 and N2 should be 18% and 12%, respectively. The results provide fundamental data for modeling discharges in C4F7N and its mixtures. [ABSTRACT FROM AUTHOR]

Wide bandgap (WBG) semiconductor devices are developing rapidly due to their superior performance compared to traditional silicon-based devices. However, the packaging technology of traditional devices has limited the application of WBG semiconductor devices because of the challenges in electrical insulation. The complex environment of high blocking voltage, high frequency, and high temperature is the major reason for insulation failure of encapsulation structure. Therefore, in this article, an epoxy resin composite with nonlinear conductivity is proposed to be used as a coating to improve the electric field distribution of high-voltage high-power IGBT modules. First, an electrical field simulation model was built considering the thermal stress. It was found that the electric field in high temperature was improved compared with that in room temperature due to the temperature-dependent conductivity of silicone gel. Nevertheless, the risk of insulation failure still exists. After the application of nonlinear conductivity materials (NCMs) coating, the maximum electric field at the triple junctions and the ratio of electric field distortion in high field areas were significantly decreased. Further analysis showed that the optimization ratio of electric field increased with the increase of the blocking voltages or power losses in the IGBT chip. The results have demonstrated that the NCMs can reduce the maximum electric field in the IGBT encapsulation structure by 73% under the operating conditions of 120 W 10 kV. Partial discharge (PD) tests show that the partial discharge initial voltage (PDIV) of the substrates with NCM coating is increased by 33% compared with the normal encapsulation structure and the coating significantly inhibits the growth of electric trees. The presented results indicate that the NCMs have the potential to improve the insulation performance of high-voltage high-power IGBT modules. [ABSTRACT FROM AUTHOR]

The dielectric breakdown properties of SF6-CF4 mixtures were investigated at different ratios of SF6, 0.01-1.6 MPa, and gas temperatures up to 3000 K. Initially, the equilibrium compositions of SF6-CF4 mixtures were calculated by minimizing the Gibbs free energy under the assumptions of local thermodynamic and chemical equilibrium. Then the electron energy distribution function was obtained based on those data by solving the Boltzmann equation under the zero-dimensional two-term spherical harmonic approximation. Finally, the critical reduced electric field strength (E/N)cr of SF6-CF4 mixtures, which is defined as the value for which total ionization reaction is equal to total attachment reaction, were determined and analyzed. The results confirm the superior breakdown properties of pure SF6 at relatively low gas temperatures. However, for higher gas temperatures (i.e., T > 2200 K at 0.4 MPa), the (E/N)cr in SF6-CF4 mixtures are obviously higher than that in pure SF6 and the values of (E/N)cr increase with the reduction of the ratio of SF6. [ABSTRACT FROM AUTHOR]

Perfluoronitriles (PFN) and their mixtures have garnered much attention as a great potential SF6-substitute gas, owing to their excellent dielectric strengths and minimal impacts on the environment. The dielectric properties of C4-PFN/CO2 and SF6/N2 mixtures are investigated and compared by experiments and calculations, with taking into account the limitations of saturated vapor pressure on the mixed ratio at certain ambient temperatures. The saturated vapor pressures of these two mixtures are determined by combining the Antoine Equation and the basic law of vapor liquid equilibrium. Then, the 50% breakdown voltages V50% of the C4-PFN/CO2 and SF6/N2 mixtures are determined by tests with up-and-down method, and the values of E/p are deduced. Finally, the dielectric properties of these two mixtures are analyzed by combining the saturated vapor pressure characteristics and the breakdown electric field strengths. The results show that a proper choice of the mixed ratio and gas pressure of the C4-PFN/CO2 mixture can provide a stronger DS than the SF6/N2 mixture and pure SF6. This indicates a great potential of the C4-PFN/CO2 mixture as a SF6-substitute gas for high voltage apparatus. [ABSTRACT FROM AUTHOR]

A study was carried out on the characteristics of the dielectric strength of gaseous working medium in a puffer circuit breaker following current interruption. A reduced critical electric field strength (E/N)cr was defined. Its value for SF6 gas within the temperature range of 300 to 3000 K and pressure range of 1 to 32 atm was obtained by solving the Boltzmann equation with most recent atomic data, which allows the determination of the critical electric field strength Ecr at different temperature and pressure. The dielectric behavioral pattern of the breaker was then characterized by applying the Ecr data to the temperature and pressure fields obtained by a 2-D magneto-hydro- dynamics model encompassing all important mechanisms operating in the arcing process. The Ecr distribution at 80 and 110 \mus after current zero was then compared to the electric-field distribution to arrive at important information regarding the weakest point or regions in the design. Using a standard rate of rise of recovery voltage profile, the critical dielectric withstand level of the breaker was also predicted. [ABSTRACT FROM PUBLISHER]

Reduced critical electric field strength (E/N)cr is an important indicator for the evaluation of dielectric breakdown of SF6 and its mixtures. This paper aims to analytically investigate the dielectric breakdown properties of SF6-N2 mixtures. First, (ɑ-η)/N and (E/N)cr of SF6-N2 mixtures at room temperature, and then (E/N)cr of hot SF6 at several pressures are calculated and compared with other studies. The results confirmed the validity of the present calculation method and parameters. In addition, the electron energy distribution function, reduced ionization coefficient ɑ/N and attachment coefficient η/N of SF6-N2 mixtures are obtained at different proportions and under 1 atm in the gas temperature range 300-3000 K. Then (E/N)cr can be determined when the effective ionization coefficient (ɑ-η)/N = 0. The results show that in a certain temperature range, due to the effect of N2 on reduction in the proportion of high-energy electrons, (E/N)cr of SF6-N2 mixtures will be enhanced by increasing N2. [ABSTRACT FROM AUTHOR]

• Established the design criteria for ±550 kV DC insulator based on insulation tests. • Determined the optimum geometry for ±550 kV DC GIS considered the surface charge. • Analyzed the effect of geometry of three typical insulators on insulation performance. • Obtained the optimum geometries of the three typical insulators, respectively. High voltage direct current (HVDC) gas-insulated switchgear (GIS) plays a crucial role in developing far offshore wind power and attaining renewable energy and interconnection objectives. However, surface charge accumulation reduces the surface flashover voltage and restricts the development of DC GIS at the higher voltage. In this paper, the design criteria for a ± 550 kV DC insulator were proposed based on DC insulation testing. The influence of geometry on electric field and charge distribution of obtuse conical insulators, disk insulators, and conical insulators was systematically investigated. The results show that the threshold of the tangential electric field under the DC superimposed lighting impulse test for the ±550 kV DC insulator is 11.1 kV/mm. The simulation results indicate that the increasing inclination of the insulator enhances the normal electric field and surface charge density, while the increase in insulator size diminishes the tangential electric field dramatically. The obtuse conical insulator with an upper surface inclination angle of 30°, a lower surface included angle of 140°, and a diameter of 812.5 mm is ideal for ±550 kV DC GIS. The obtained results may provide guidance for the compact design of insulators and the development of DC GIS. [Display omitted] [ABSTRACT FROM AUTHOR]

This paper provides theoretical calculations that predict the dielectric breakdown properties of carbon dioxide (CO2) and its mixtures with 50% O2 and 50% H2 for a gas temperature range of 300–3500 K at 0.1 MPa. CO2 is one of the most likely candidates for an environment-friendly arc-quenching medium to replace SF6 in high-voltage circuit breakers. Initially, the electron energy distribution function (EEDF) is derived by solving the Boltzmann equation under the zero-dimensional two-term spherical harmonic approximation. Then the reduced ionization and attachment coefficients are obtained, based on the calculated EEDF. Finally, the critical reduced electric field strength (E/N)cr, which is defined as the value for which total ionization reactions are equal to total attachment reactions, is obtained and analysed. The results demonstrate the superior breakdown properties of a 50% CO2–50% O2 mixture to those of both pure CO2 and 50% CO2–50% H2. Nearly no deviation in (E/N)cr is found in a 50% CO2–50% O2 mixture for gas temperatures up to 2500 K, and although there is clear reduction as the gas temperature is increased further to 3500 K, the value remains higher than that of pure CO2. [ABSTRACT FROM AUTHOR]