Search

All the Li metal anode-based batteries suffer from a high propensity to form Li dendrites. To prevent the formation of dendritic lithium on the electrodes, amorphous carbon coatings are deposited onto the surface of metallic lithium foil by magnetron sputtering technique. The electrochemical performances of the amorphous carbon-coated lithium (Li/C) electrodes are investigated by galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The compact carbon coatings on the surface of lithium foil can suppress the growth of dendritic lithium during charge–discharge process. The thickness of amorphous carbon coating affects the electrode from two aspects; the thick coating can prevent the formation of dendritic lithium much efficiently, but lead to a large impedance of Li+ transfer.

Novel Li1.2Mn0.5Co0.25Ni0.05O2 microcube is prepared through a simple binary template method. After calcined at 800 °C, lithium and nickel are permeated into the cathode material and a well-crystallized Li-rich layered oxide is obtained. Furthermore, hollow circle cube architecture is formed due to the decomposing of the carbonate. As a cathode material for lithium ion batteries (LIBs), the oxide with such architecture can deliver high initial discharge capacity of 272.9 mAh g−1 at a current density of 20 mA g−1. High reversible discharge capacities of 208 mAh g−1 and 110 mAh g−1 are obtained at a current density of 200 mA g−1 and 2000 mA g−1, respectively. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are performed to further study the hollow Li1.2Mn0.5Co0.25Ni0.05O2 microcube. It is remarkable that such architecture makes the Li-rich layered oxide Li1.2Mn0.5Co0.25Ni0.05O2 a promising cathode material for LIBs.

A porous Co3O4 nanoflake array film grown on nickel foam is prepared by a hydrothermal synthesis for pseudo-capacitor application. The pseudocapacitive behavior of the Co3O4 nanoflake array is investigated by cyclic voltammograms (CV), galvanostatic charge–discharge tests and electrochemical impedance spectroscopy (EIS) in 2 M KOH at different temperatures. The specific capacity is 210, 289 and 351 F g−1 at 2 A g−1 tested at −5 °C, 25 °C and 60 °C, respectively, corresponding to that of 184, 243 and 242 F g−1 at 20 A g−1. After 4000 cycles at 2 A g−1, the remaining specific capacity is 187, 342 and 124 F g−1 tested at −5 °C, 25 °C and 60 °C. It shows that with increasing the temperature from −5 °C to 60 °C, the specific capacity increases, while the cycling stability becomes worse. The operation temperature has a pronounced influence on the pseudocapacitive performance of Co3O4 nanoflake array.

CoFe2O4 flower-like microspheres are prepared via a surfactant- and template-free method, involving the controlled hytrothermal synthesis firstly and a subsequent thermal decomposition treatment. The microspheres with diameters of 3–4 μm are characterized by the assembly of numerous porous and inter-connected lamella structures. Lithium-ion batteries electrodes based on the as-prepared CoFe2O4 microspheres show a high specific capacity of 733.5 mAh g−1 after 50 cycles at a current density of 200 mA g−1 and a good cyclic stability, as well as excellent rate capability. The enhanced electrochemical performance can be attributed to the hierarchical microsphere structure with high sufficient interfacial contact area between the microspheres and electrolyte, the short diffusion distance of Li+, better accommodation of structural stress and volume change with the lithiation/delithiation process. It is suggested that the CoFe2O4 microsphere is one of the most promising candidates for high-performance lithium-ion batteries.

Surface modified-LiV 3 O 8 cathode materials with Al 2 O 3 are successfully synthesized via a facile thermolysis process. The 0.5 wt.% Al 2 O 3 -coated LiV 3 O 8 exhibits an enhanced cyclic stability at various charge–discharge current densities. At a current density of 100 mA g −1 , it delivers an initial specific discharge capacity of 283.1 mAh g −1 between 2.0 and 4.0 V. Moreover, high capacities of 139.4 and 118.5 mAh g −1 are obtained at the 100th cycle at current densities of 2000 and 3000 mA g −1 , respectively. The improved electrochemical performance is attributed to the Al 2 O 3 coating, which can hinder the irreversible phase transformation and act as a protective layer to prevent the active material from direct contact with electrolyte. Furthermore, the formation of a Li–V–Al–O solid solution at the LiV 3 O 8 /Al 2 O 3 interface provides a fast Li + diffusion path which is of benefit to the electrochemical behaviors.

LiVO3 materials are synthesized by combustion method with oxalic acid as fuel. Owing to its relatively low crystallization and small particle size, the LiVO3 calcined at 450 °C for 2 h displays optimal electrochemical performances, delivering a high discharge capacity of 298.4 mAh g−1 and 262.5 mAh g−1 between 1.0 and 3.5 V at a current density of 50 mA g−1 and 500 mA g−1 respectively, and exhibiting good cyclic stability. In this work, the chemical diffusion coefficient of Li+ (DLi+) in the LiVO3 electrode is determined by electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT). The value calculated by EIS is in the range of 10−9–10−8 cm2 s−1, while it calculated by GITT is 10−9.5–10−8 cm2 s−1.

Cube-like and plate-like Li[Li 0.2 Mn 0.54 Ni 0.13 Co 0.13 ]O 2 particles are obtained after treated in LiCl and KCl molten salts at 800 °C, respectively, comparing to the ball-like original particles calcined in air. The oxide treated in KCl molten salt with large specific area of 17.05 m 2 g −1 delivers high discharge capacities of 254.1 mAh g −1 and 168.5 mAh g −1 at current densities of 200 mA g −1 and 2000 mA g −1 , respectively. In addition, enhanced cycle stability with capacity retention of 94.9% after 80 cycles at charge–discharge current densities of 200 mA g −1 is obtained for the oxide treated in LiCl molten salt with sacrifice of a little capacity. Such electrochemical performance change is proved to be independent of Li + diffusion coefficient. It appears that the treatment in molten salts can effectively reform the electrochemical performances of Li[Li 0.2 Mn 0.54 Ni 0.13 Co 0.13 ]O 2 cathode materials for various applications.

Macroporous Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials with high crystallinity and hexagonal ordering are synthesized by aerogel template followed by solid state reaction. High discharge capacities of 244.0 mA h g−1 and 153.9 mA h g−1 are obtained for the Li-rich layered oxide synthesized at 800 °C at current densities of 200 mA g−1 and 2000 mA g−1 between 2.0 V and 4.8 V. Increasing the synthesis temperature to 900 °C, the macroporous Li1.2Mn0.54Ni0.13Co0.13O2 delivers a high discharge capacity of 220.2 mA h g−1 at a current density of 200 mA g−1 with a capacity retention of 89.1% after 50 cycles, 129.8 mA h g−1 at a current density of 2000 mA g−1 and almost no capacity fading after 120 cycles. The diffusion coefficients of Li+ in the Li-rich layered oxide determined by galvanostatic intermittent titration technique are in the range of 5.0 × 10−18−8.0 × 10−14 cm2 s−1. Electrochemical impedance spectroscopy indicates that the macroporous structure with good particle contact of the layered oxide can improve its rate capability and cyclic stability.

Porous NiCo2O4 hetero-structure arrays on nickel foam are prepared by a facile hydrothermal method. The morphology of the arrays changes with the growth time. After hydrothermal synthesis for 8 h in combination with annealing treatment, the NiCo2O4 array presents a nanoflake–nanowire hetero-structure. The porous NiCo2O4 hetero-structure array exhibits the excellent pseudocapacitive properties in 2 M KOH, with a high capacitance of 891 F g−1 at 1 A g−1 and 619 F g−1 at 40 A g−1 before activation as well as excellent cycling stability. The specific capacitance can achieve a maximum of 1089 F g−1 at a current density of 2 A g−1, which can still retain 1058 F g−1 (97.2% retention) after 8000 cycles. The enhanced pseudocapacitive performances are mainly attributed to its unique hetero-structure which provides fast ion and electron transfer, large reaction surface area and good strain accommodation.

Li-rich layered oxide Li[Li0.2Mn0.54Ni0.13Co0.13]O2 is synthesized by combustion reaction using alcohol as both solvent and fuel. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that the oxide synthesized at 800 °C exhibits perfect crystallinity and lattice ordering, and has particle sizes of 50–150 nm. The layered oxide delivers an initial discharge capacity of 290.1 mAh g−1 at a current density of 20 mA g−1 after activation, and exhibits improved rate capability with high discharge capacities of 238.6 and 165.0 mAh g−1 at current densities of 200 and 2000 mA g−1 in the voltage range of 2.0–4.8 V, respectively. Low Li-ion diffusion coefficient of 1.07 × 10−14−1.01 × 10−16 cm2 s−1 is calculated by galvanostatic intermittent titration technique (GITT) during the initial discharge process, indicating that the improved rate capability is mainly attributed to the small particle sizes of the Li-rich oxide.

LiF is successful used to modify the surface of layered LiNi 1/3 Co 1/3 Mn 1/3 O 2 via a wet chemical method followed by an annealing process. The lattice structure of LiNi 1/3 Co 1/3 Mn 1/3 O 2 is not changed distinctly after modification and part of F − dopes into the surface lattice of the oxide. The LiF-modified oxide exhibits capacity retentions of 97.5% at 0.1 C at room temperature and 93.5% at 1 C at 60 °C after 50 cycles, and delivers a high discharge capacity of 137 mAh g −1 at 10 C at room temperature. Furthermore, it has reversible capacities of 124.4 mAh g −1 at 1 C at 0 °C and 85.6 mAh g −1 at 0.1 C at −20 °C, respectively. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) tests show that the LiF-modified layer can reduce the dissolution of metal ions in the electrode and enhance the conductivity of the oxide surface through partly F-substitution. LiF modification will be promising for the application of layered oxide for lithium ion batteries.

Well-formed Li 1.131 Mn 0.504 Ni 0.243 Co 0.122 O 2 cathode materials are synthesized via freeze drying followed by a solid state reaction at temperatures of 750–900 °C. Among these oxides, the one synthesized at 800 °C delivers the highest initial discharge capacity of 246.5 mAh g −1 at 0.1 C (1 C = 200 mA g −1 ) between 2.5 V and 4.8 V. Enhancing the discharge rate to 1 C, initial capacity of 197.8 mAh g −1 is obtained, and 78.8% capacity is retained after 50 cycles. Furthermore, the diffusion coefficients of Li + in the lithium-rich layered oxide are about 10 −14 cm 2 s −1 and 10 −15 cm 2 s −1 for the initial charge platform at 3.90 V and 4.55 V, respectively, determined by galvanostatic intermittent titration technique (GITT). The Li 1.131 Mn 0.504 Ni 0.243 Co 0.122 O 2 prepared by freeze drying is a promising cathode material for lithium ion batteries.

A three-dimensional (3D) porous nano-Ni supported Si composite film is successfully fabricated by the combination of hydrogen bubble template electrodeposition of porous nano-Ni film and radiofrequency magnetron sputtering amorphous silicon. As anode for lithium-ion batteries, the 3D porous Ni/Si composite film shows noticeable electrochemical performance with high capacity of 2444 mAh g −1 at a current density of 0.84 A g −1 , superior capacity retention of 83% after 100 cycles, as well as excellent rate capability with 1420 and 1273 mAh g −1 at charge–discharge current densities of 4.2 A g −1 and 8.4 A g −1 after 100 cycles, respectively. The enhanced electrochemical performance is mainly attributed to the highly porous conductive architecture, which provides good mechanical support and electron conducting pathway for active silicon and alleviates the structure degradation caused by volume expansion during the cycling process.

A NiO–graphene hybrid is synthesized by a liquid phase deposition method. As an anode material for lithium ion batteries, the cyclic stability and rate capability of NiO is significantly improved after the incorporation of graphene sheets. The NiO–graphene hybrid electrode delivers a capacity of 646.1 mA h g −1 after 35 cycles at a current density of 100 mA g −1 , corresponding to 86.3% capacity retention. When the current density is increased to 400 and 800 mA g −1 , it still maintains a capacity of 509 and 368.5 mA h g −1 , respectively. The thermodynamic and kinetic properties of NiO electrodes with and without graphene are investigated by galvanostatic intermittent titration technique. The relationship between the rate and voltage hysteresis is also discussed. The polarization of both the electrodes in all cases obeys ohmic rule in the present rate range. The incorporation of graphene sheets can partly reduce the voltage polarization thereby the voltage hysteresis with increasing the current density. However, the extrapolation to zero current ends up in an approximate residual voltage for both the NiO electrodes.

A hierarchically porous NiO film on nickel foam substrate is prepared by a facile ammonia-evaporation method. The self-assembled film possesses a structure consisting of NiO triangular prisms and randomly porous NiO nanoflakes. The pseudocapacitive behaviors of the porous NiO film are investigated by cyclic voltammograms and galvanostatic charge–discharge tests in 1 M KOH. The hierarchically porous NiO film exhibits a high discharge capacitance and excellent rate capability with 232 F g−1, 229 F g−1, 213 F g−1 and 200 F g−1 at 2, 4, 10, and 20 A g−1, respectively. The specific capacitance of 87% is maintained from 2 A g−1 to 20 A g−1. The porous NiO film also shows rather good cycling stability and exhibits a specific capacitance of 348 F g−1 after 4000 cycles.

A nanosized LiFePO4/C composite with a complete and thin carbon-shell is synthesized via a ball-milling route followed by solid-state reaction using poly(vinvl alcohol) as carbon source. The LiFePO4/C nanocomposite delivers discharge capacities of 159, 141, 124 and 112 mAh g−1 at 1 C, 5 C, 15 C and 20 C, respectively. Even at a charge–discharge rate of 30 C, there is still a high discharge capacity of 107 mAh g−1 and almost no capacity fading after 1000 cycles. Based on the analysis of cyclic voltammograms, the apparent diffusion coefficients of Li ions in the composite are in the region of 2.42 × 10−11 cm2 s−1 and 2.80 × 10−11 cm2 s−1. Electrochemical impedance spectroscopy and galvanostatic intermittent titration technique are also used to calculate the diffusion coefficients of Li ions in the LiFePO4/C electrode, they are in the range of 10−11–10−14 cm2 s−1. In addition, at −20 °C, it can still deliver a discharge capacity of 122 mAh g−1, 90 mAh g−1 and 80 mAh g−1 at the charge–discharge rates of 0.1 C, 0.5 C and 1 C, respectively.

Li 3 V 2 (PO 4 ) 3 , Li 3 V 2 (PO 4 ) 3 /C and Li 3 V 2 (PO 4 ) 3 /(Ag + C) composites as cathodes for Li ion batteries are synthesized by carbon-thermal reduction (CTR) method and chemical plating reactions. The microstructure and morphology of the compounds are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The Li 3 V 2 (PO 4 ) 3 /(Ag + C) particles are 0.5–1 μm in diameters. As compared to Li 3 V 2 (PO 4 ) 3 , Li 3 V 2 (PO 4 ) 3 /C, the Li 3 V 2 (PO 4 ) 3 /(Ag + C) composite cathode exhibits high discharge capacity, good cycle performance (140.5 mAh g −1 at 50th cycle at 1 C, 97.3% of initial discharge capacity) and rate behavior (120.5 mAh g −1 for initial discharge at 5 C) for the fully delithiated (3.0–4.8 V) state. Electrochemical impedance spectroscopy (EIS) measurements show that the carbon and silver co-modification decreases the charge transfer resistance of Li 3 V 2 (PO 4 ) 3 /(Ag + C) cathode, and improves the conductivity and boosts the electrochemical performance of the electrode.

We report a simple self-assembled synthesis of hierarchical CuO particles with various morphologies such as leaf, shuttle, flower, dandelion, and caddice clew. The morphologies can be easily tailored by adjusting the pH value. The synthesis is based on dehydration and re-crystallization of precursor Cu(OH) 2 nanowires. [Cu(NH 3 ) 4 ] 2+ and OH − in the solutions are considered as the key factors to influence the assembling manner of CuO. The obtained hierarchical CuO particles serve as a good model system for the study as anodes for lithium ion batteries. Various morphologies of CuO particles result in different electrochemical performances of electrodes. Compared to others, dandelion-like and caddice clew-like CuO exhibit reversible discharge capacities of 385 mAh g −1 and 400 mAh g −1 at 0.1 C, 340 mAh g −1 and 374 mAh g −1 at 0.5 C after 50 cycles, respectively. The higher discharge capacities and better cycling performances are attributed to their larger surface area and porosity, leading to better contact between CuO and electrolyte and shorter diffusion length of lithium ions.