Search

Abstract Oxygen evolution reaction (OER) plays a key role in electrochemical splitting of water and it is urgent to develop high-performance and cost-effective OER catalysts. In this work, we report the synthesis of V-Co/CoO@C nanorod as highly efficient OER catalysts. The V 2 O 5 nanowire and metal organic framework composite leads to the successful preparation of the catalyst. The V 2 O 5 nanowire not only induces the formation of Co/CoO species, but also facilitates uniform V doping. When used as OER catalyst, the V-Co/CoO@C nanorod only needs a low overpotential of 320 mV to achieve a high current density of 10 mA·cm−2. Graphical abstract Unlabelled Image Highlights • Porous V-Co/CoO@C nanorod was synthesized by using a V 2 O 5 @ZIF-67 as precursor. • The V-Co/CoO@C nanorod shows high OER activity of 10 mA·cm−2 at a η value of 320 mV. • The use of V 2 O 5 lead to the formation of Co/CoO and V doping. • The Co/CoO species and uniform V doping contributed to its OER performance. [ABSTRACT FROM AUTHOR]

Abstract The oxygen reduction reaction (ORR) is one of the core reactions that occur in fuel cells and metal air batteries. Metal-free catalysts such as porous carbons are promising candidates for ORR and the performance of porous carbons strongly depends on their nanostructure. Herein, we reported the synthesis of high surface area N doped carbon nanotube (CNT-900) by using ZnO@zeolite imidazolate framework (ZnO@ZIF-8) nanowire as a precursor. When used for an ORR catalyst, the CNT-900 show obvious superior performance compared with the carbon derived from ZIF-8. In addition, it exhibits comparable activity with 20 wt% Pt/C and superior stability. Combined with green and facile synthesis strategy, the method in this work can be easily extended to synthesis other nanomaterials for energy storage and conversion application. Graphical abstract N doped carbon nanotube with high surface area and ORR performance was synthesized by using ZnO@ZIF-8 nanowire as precursor. Unlabelled Image Highlights • ZnO@ZIF-8 was facilely synthesized at room temperature and converted to N doped carbon nanotube at 900 °C. • The CNT-900 shows very high surface area, which greatly improves its ORR performance. • The CNT-900 exhibits comparable activity with 20 wt% Pt/C and superior stability. [ABSTRACT FROM AUTHOR]

Abstract: The oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) are two of the core reactions that occur in fuel cells and water electrolysis devices. Heteroatom-doped carbon materials are promising metal-free electrocatalysts to improve the conversion efficiency of these devices. To optimize the nanostructures of such carbon-based catalysts, herein, we reported an effective template method to synthesize N doped carbon nanotubes by using polydopamine as a precursor. The use of the ZnO nanowire not only serves as a self-sacrificial template to direct the formation of the nanotube, but also greatly extends the porosity of the carbon nanotube. Moreover, the polydopamine precursor also leads to effective N doping. An optimized sample, NCNT-900, shows high ORR performance comparable with that of Pt/C as well as good HER performance in both alkaline and acid media, making it one of the most effective carbon-based HER catalysts. This strategy offers an opportunity to synthesize catalysts with higher activity by rational design of a carbon precursor with higher N content or multi-heteroatom co-doping.Graphical Abstract: Nitrogen doped carbon nanotube with high performance for both ORR and HER was synthesized using ZnO nanowires as template. The obtained materials show effective N doping that provides abundant active sites, high surface area and unique textural parameters that can effectively enhance mass transfer. When used for electrocatalysts, NCNT-900 shows high ORR performance comparable with that of Pt/C and good HER performance in both alkaline and acid media. [ABSTRACT FROM AUTHOR]

The sluggish anodic oxygen evolution reaction (OER) greatly hinders the working efficiency of electrochemical water splitting to produce hydrogen, and it is therefore important to explore high-performance and cost-effective OER catalysts. In this communication, we report the synthesis of cobalt boride incorporated within porous carbon using a metal–organic framework (MOF) as a precursor. The high catalytic activity of Co–B and the high conductivity of carbon both contribute to the OER catalytic activity of Co–B/C. When used as an OER catalyst, this material shows high catalytic activity, delivering a current density of 10 mA cm − 2 at a low overpotential of 320 mV, as well as outstanding long-term electrochemical durability. This finding is of fundamental and practical importance as it not only extends the application of MOFs, but also introduces a new method for synthesizing highly efficient OER electrocatalysts. [ABSTRACT FROM AUTHOR]

• MoO 2 @MoS 2 @Co 9 S 8 heterostructure nanorod by utilizing MoO 3 @ZIF-67 as a precursor. • The nanorod is assembled by 2D nanosheet with high electrochemical surface area. • The nanorod can serve as bifunctional electrocatalyst for overall water splitting. • The HER and OER overpotentials at 10 mA cm−2 are 160 mV and 310 mV. • The high performance is induced by the synergistic effect of the heterostructure. Developing low-cost and high-efficiency bifunctional catalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) to catalyze electrochemical overall water splitting is critical for the production of hydrogen. Herein, we develop an in-situ reduction and vulcanization strategy to prepare MoO 2 @MoS 2 @Co 9 S 8 heterostructure nanorods by utilizing MoO 3 @ZIF-67 as a precursor. The reduction of MoO 3 can produce more conductive MoO 2 , and the vulcanization reaction can produce highly active MoS 2 for the HER as well as highly active Co 9 S 8 for the OER. In addition, the MoS 2 anchor on the MoO 2 not only facilitates electron transfer, but also interacts with Co 9 S 8 to induce a synergic catalytic effect by the electron transfer between them. Moreover, the 2D nanosheet assembled heterostructure nanorods can provide a large electrochemical surface area. Therefore, the merits of the materials are fully utilized and outstanding catalytic performances are achieved. MoO 2 @MoS 2 @Co 9 S 8 can catalyze HER and OER effectively with overpotentials of 160 and 310 mV at 10 mA cm−2, indicating its bifunctional activity. In addition, the two electrode electrolyzer catalyzed by MoO 2 @MoS 2 @Co 9 S 8 can reach 10 mA cm−2 current density at a cell voltage of 1.62 V with very high stability, demonstrating its practical application for water splitting. [ABSTRACT FROM AUTHOR]

• ZnS decorated N, S co-doped porous carbon polyhedron are synthesized. • A small fraction of ZnS can greatly improve the ORR activity of the catalyst. • The ZnS@NC-3 shows comparable ORR activity with 20 wt% Pt/C catalyst. • The Zn-air battery using ZnS@NC-3 shows an open circuit voltage of 1.524 V. • The Zn-air battery exhibit a power density of 176 mW cm−2 and a specific capacity of 736 mA h g−1. Developing low cost, environmentally friendly and high efficiency oxygen reduction reaction (ORR) electrocatalysts is critical for clean energy conversion and storage devices including fuel cells and metal-air batteries. Herein, we developed a facile method to doping N, S and ZnS into carbon framework simultaneously. The N, S co-doping and extra ZnS active sites could prominently enhance the ORR performance of the carbon. The optimized sample ZnS@NC-3 exhibit an onset potential of 0.94 V and a half-wave potential of 0.84 V, which is comparable to 20 wt% Pt/C. In addition, the methanol tolerance and cycle ability are obvious superior than that of Pt/C. Moreover, when used as electrocatalysts for Zn-air battery, the battery exhibits an open circuit voltage of 1.524 V, a high specific capacity of 736 mA h g−1 and a max power density of 176 mW cm−2, demonstrating its great potential for clean energy conversion. [ABSTRACT FROM AUTHOR]

Designing efficient oxygen evolution reaction (OER) electrocatalysts is crucial for practical applications in water splitting and metal-air battery devices. Special structures of materials often bring in unprecedented catalytic activity. Herein, we first report the synthesis of CoMoO 4 nanotube by using MoO 3 @ZIF-67 nanorod. The CoMoO 4 nanotube shows high OER activity with a low overpotential of 315 mV delivering a current density of 10 mA cm−2. The electro-catalytic activity surpasses that of many Co and Mo-based catalysts. Furthermore, the strategy presented here is facile, and can be extended to the synthesis of other Mo-based nanotube materials for energy storage and conversion. Unlabelled Image • CoMoO 4 nanotube was prepared by using MOF composite as precursor for the first time. • The CoMoO 4 shows high a specific surface area of 157 m2 g−1. • The CoMoO 4 shows high OER activity of 10 mA cm−2 at an overpotential of 315 mV. • The CoMoO 4 also shows outstanding long-term electrochemical durability. [ABSTRACT FROM AUTHOR]

[Display omitted] • Hollow CoVO x /Ag heterojunction was synthesized for OER. • The interaction of CoVO x and Ag nanoparticles regulated the electronic structure. • The extrinsic catalytic activity of CoVO x /Ag is enhanced due to the hollow structure. • The OER overpotential for CoVO x /Ag-5 at 10 mA cm−2 is only 247 mV. • The catalyst can enable full water splitting with 100% Faraday efficiency. Developing high-active and inexpensive electrocatalysts for oxygen evolution reaction (OER) is very important in the field of water splitting. The catalytic performance of electrocatalysts can be significantly improved by optimizing the electronic structure and designing suitable nanostructure. In this work, we represent the synthesis of hollow CoVO x /Ag-5 for OER. Due to the interaction of CoVO x and Ag nanoparticles, the electronic structure is optimized to improve the intrinsic catalytic activity. Additionally, the extrinsic catalytic activity of CoVO x /Ag is enhanced by the abundant active sites from the hollow structure. As a result, the CoVO x /Ag-5 demonstrates significantly enhanced OER catalytic activity with a low overpotential of 247 mV at 10 mA cm−2. In addition, it also exhibits excellent durability, without obvious attenuation in performance after continuous operation for 60 h. Furthermore, the catalyst can enable full water splitting with appropriate 100 % Faraday efficiency, demonstrating its practical application. [ABSTRACT FROM AUTHOR]

A novel CoMoO 4 -RuO 2 heterogeneous catalyst with flower-liked morphology was developed as a highly efficient bifunctional oxygen electrocatalyst for Zn-air battery. [Display omitted] Constructing heterogeneous catalysts can significantly boost the electrocatalytic activity due to the improved intrinsic catalytic activity induced by tailored electronic structure and optimized chemisorption to the reaction intermediates. RuO 2 based electrocatalysts are especially attractive due to the high catalytic activity of RuO 2. To reduce the usage of noble metal and improve the catalytic activity of catalyst, CoMoO 4 -RuO 2 micro-flower was synthesized using a facile hydrothermal-calcination method in this work. CoMoO 4 -RuO 2 exhibits a low overpotential of 177 mV at 10 mA cm−2 for oxygen evolution reaction (OER) and a high half-wave potential of 0.858 V for oxygen reduction reaction (ORR). Moreover, the Zn-air battery assembled using CoMoO 4 -RuO 2 exhibit shows a high maximum discharge power density of 149 mW cm−2 and a large open circuit voltage of 1.38 V. The good performance can be attributed to the incorporation of RuO 2 , which not only induces extra catalytic active sites, but also forms heterojunction with CoMoO 4 to optimize the electronic structure of CoMoO 4 -RuO 2 , thereby achieving a better equilibrium of absorption and desorption of intermediates. The work provides insights into designing RuO 2 based electrocatalysts for advanced electrocatalysis. [ABSTRACT FROM AUTHOR]

Ir nanoparticles have been synthesized by using a sample hydrothermal method while well dispersed Ir@SiO 2 composite microspheres could be obtained hydrothermally after adding SiO 2 microspheres into the synthesis system. Particles of Ir formed on the surface of SiO 2 microspheres were well crystalline similar to the pure Ir nanoparticles. Both the glassy carbon electrodes modified by Ir nanoparticles and Ir@SiO 2 composite microspheres showed weak electrochemical activities toward oxidation of dopamine and ascorbic acid. However, the Ir nanoparticles modified gold electrode displayed an obvious catalytic activity toward electrooxidation of either dopamine or ascorbic acid. For the gold electrode modified with Ir@SiO 2 composite microspheres, the electrochemical behavior could be affected obviously by the quantity of the electrocatalyst on the surface of bare gold electrode. The relationship between structure and property of both samples have been studied and analyzed based on the experimental data. [ABSTRACT FROM AUTHOR]

The oxygen evolution reaction (OER) is kinetically sluggish due to the limitation of the four-electron transfer pathway, so it is imperative to explore advanced catalysts with a superior structure and catalytic output under facile synthetic conditions. In the present work, an easily accessible strategy was proposed to implement the plant-polyphenol-involved coordination assembly on Co(OH)2 nanosheets. A TA-Fe (TA = tannic acid) coordination assembly growing on Co(OH)2 resulted in the heterostructure of Co(OH)2@TA-Fe as an electrocatalyst for OER. It could significantly decrease the overpotential to 297 mV at a current density of 10 mA cm−2. The heterostructure Co(OH)2@TA-Fe also possessed favorable reaction kinetics with a low Tafel slope of 64.8 mV dec−1 and facilitated a charge-transfer ability. The enhanced electrocatalytic performance was further unraveled to be related to the confined growth of the coordination assembly on Co(OH)2 to expose more active sites, the modulated surface properties and their synergistic effect. This study demonstrated a simple and feasible strategy to utilize inexpensive biomass-derived substances as novel modifiers to enhance the performance of energy-conversion electrocatalysis. [ABSTRACT FROM AUTHOR]

CoS 2 @MoS 2 @NiS 2 nano polyhedron with double-shelled structure was demonstrated to have multiple catalytic activity for HER, OER and ORR, which could serve as highly efficient catalysts for both rechargeable Zn-air batteries and overall water spitting. [Display omitted] • Double shelled hollow CoS 2 @MoS 2 @NiS 2 polyhedron was synthesized using a self-template method. • The CoS 2 @MoS 2 @NiS 2 exhibits multiple catalytic activity for HER, OER and ORR. • The CoS 2 @MoS 2 @NiS 2 exhibits a low HER overpotential of 156 mV at 10 mA cm−2. • The OER and ORR performance was demonstrated by rechargeable Zn-air battery. • The Zn-air battery can effectively drive water splitting device catalyzed by CoS 2 @MoS 2 @NiS 2. Electrocatalysts play important role in various energy conversion and storage devices. The catalytic performance of electrocatalysts can be enhanced through the increasement of intrinsic catalytic activity by optimizing electronic structure and the improvement of exposed active sites by designing proper nanostructures. In this work, CoS 2 @MoS 2 @NiS 2 nano polyhedron with double-shelled structure was prepared using metal organic framework as a precursor. Due to the rational integration of multifunctional active center, the strong electronic interaction of the various component, the high electrochemical surface area and shortened mass transport induced by the special structure, CoS 2 @MoS 2 @NiS 2 exhibits high catalytic activity for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Specifically, low overpotentials of 156 and 200 mV was achieved to deliver a current density of 10 mA cm−2 for HER and OER, and a high half-wave potential of 0.80 V was observed for ORR. More importantly, the Zn-air battery assembled by CoS 2 @MoS 2 @NiS 2 exhibits a high-power density of 80.28 mW cm−2 and could effectively drive overall water splitting. This work provides a new platform for designing multifunctional catalysts with high activity for energy conversion and storage. [ABSTRACT FROM AUTHOR]

The family of transition metal carbides, nitrides, and carbonitrides (collectively called MXenes) has been a thriving field since the first invention of Ti3C2Tx (MXene) in 2011. MXene is a new type of nanometer 2D sheet material, which exhibits great application potentials in various fields due to its multiple advantages such as high specific surface area, good electrical conductivity, and high mechanical strength. Electrocatalysis is regarded as the core of future clean energy conversion technologies, and MXene‐based materials provide inspiration for the design and preparation of electrocatalysts with high activity, high selectivity, and long loading life time. The applications of MXene‐based materials in electrocatalysis, including hydrogen evolution reaction, nitrogen reduction reaction, oxygen evolution reaction, oxygen reduction reaction, carbon dioxide reduction reaction, and methanol oxidation reaction are summarized in this review. As a crucial session regarding experiments, the current safer and more environmentally friendly preparation methods of MXene are also discussed. Focusing on the materials design and enhancement methods, the key challenges and opportunities for MXene‐based materials as a next‐generation platform in both fundamental research and practical electrocatalysis applications are presented. This account serves to promote future efforts toward the development of MXenes and related materials in the electrocatalysis applications. [ABSTRACT FROM AUTHOR]

Transition-metal chalcogenides especially MoS 2 are promising candidates as highly efficient electrocatalyst for hydrogen evolution reaction (HER). Nevertheless, the low conductivity and inert basal planes of MoS 2 limit its performance. In addition, the oxygen evolution reaction (OER) catalytic activity of MoS 2 is low. In this work, we report the synthesis of self-supported 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 nanoarrays for overall water splitting. 1 T-MoS 2 can enhance electron transfer during the reaction process. Meanwhile, abundant interfaces and defects exist in the heterogeneous catalysts, which can bring more active sites and result in strong interaction among the different components. As a result, the 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 nanoarray exhibits low overpotentials of 50 and 240 mV is achieved at 10 mA cm−2 for HER and OER with very high stability. In addition, it can catalyze overall water splitting with a low cell voltage of 1.55 V and 100% Faradic efficiency, demonstrating its practical applications. The present work offers a new route for developing 1 T-MoS 2 based hybrid electrocatalysts with desirable surface and interface structure for energy storage and conversion. [Display omitted] • Self-supported 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 nanoarrays was developed for overall water splitting. • The abundant interfaces and defects in 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 benefit its catalytic activity. • 1 T-MoS 2 can accelerate electron transfer during the catalytic process. • 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 exhibits low HER and OER overpotentials of 50 and 240 mV. • 1 T-MoS 2 /Co 3 S 4 /Ni 3 S 2 can drive full water splitting at 1.55 V with 100% Faradic efficiency. [ABSTRACT FROM AUTHOR]

• Co-Co 6 Mo 6 C 2 @NC nano polyhedron was synthesized using ZIF-67 as a precursor. • The Co 6 Mo 6 C 2 can significantly improve the OER catalytic activity of the catalyst. • The Co-Co 6 Mo 6 C 2 @NC-5 exhibits a low OER overpotential of 270 mV at 10 mA cm−2. • The Co-Co 6 Mo 6 C 2 @NC-5 exhibits a high ORR half-wave potential of 0.80 V. • The Co-Co 6 Mo 6 C 2 @NC can be used as a bifunctional electrocatalyst for Zn-air battery. A high effective bifunctional electrocatalyst was developed for rechargeable Zn-air batteries by rational integrating high active Co sites for ORR and Co 6 Mo 6 C 2 specie for OER. [Display omitted] To facilitate the development of rechargeable metal-air batteries, the exploration of high effective bifunctional electrocatalysts is essential. In this work, we report a facile strategy to synthesize N doped carbon (NC) encapsulated Co-Co 6 Mo 6 C 2 (Co-Co 6 Mo 6 C 2 @NC) nano polyhedron using ZIF-67 as a precursor and investigated its catalytic performance for both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The introduction of Co 6 Mo 6 C 2 into Co@NC can significantly improve the OER catalytic activity of the catalyst, while the high ORR catalytic activity of the catalyst is maintained. Specifically, Co-Co 6 Mo 6 C 2 @NC-5 shows a decent half-wave potential of 0.80 V for ORR, and a very low overpotential of 270 mV at 10 mA cm−2 for OER, demonstrating its bifunctional activity. The rechargeable Zn-air battery assembled using Co-Co 6 Mo 6 C 2 @NC-5 exhibits a maximum power density of 90.75 mW cm−2 and a high specific capacity of 768 mA h g−1, as well as good durability of 50 h without attenuation in performance, highlighting its practical application. [ABSTRACT FROM AUTHOR]