Search

• The present study aimed to develop a new model of a smart PV inverter with novel control schemes. • The proposed LVRT control strategy improved the voltage drop caused by the line-to-line-to-ground fault. • The central control system changed the switching mode of the inverter in the islanded mode. This article proposes a central control system that communicates with both grid-tied and off-grid control systems to offer various control strategies for operating a smart photovoltaic (PV) inverter. The target is to connect two sets of PV panels and one set of battery storage unit to either a 440 V/60 Hz utility grid or to feed local loads at 380 V/50 Hz using a smart inverter. When the smart PV inverter is connected to the grid, on the one hand, it injects fixed and programmed active power into the grid under all operating conditions, both normal and critical conditions, and on the other hand, by reciprocal exchanging reactive power with the grid, it addresses balanced and unbalanced fluctuations of the grid voltage. Also, when the smart PV inverter is disconnected from the grid, it can operate as an islanded mode to feed time-varying three-phase loads. Nonlinear simulations of the time domain in MATLAB-Simulink software show that the set of control strategies offered for the smart PV inverter not only by controlling the active power leads to the sale of electricity to the grid, but also by controlling the reactive power problems on the grid side such as voltage drop as a result of single-line-to-ground (SLG) or line-to-line-to-ground (2LG) faults, balanced grid voltage fluctuations such as voltage sag-swell and unbalanced voltage conditions will be resolved. Also, variable three-phase loads are fed well in off-grid mode. [ABSTRACT FROM AUTHOR]

• Large scale wind farm is designed including SCIG and DFIG units in two sites. • Proposed control strategy designs off-grid and grid-tied functionality for sites. • Sites and grid are supported by STATCOM and SVC to deal with voltage imbalance. • Fault ride through capability is enhanced by the proposed control strategy. • Frequency control is designed under grid-tied and off-grid operations. This paper presents a multi-objective control scheme on the interconnected wind farms which are formed by different wind turbines including doubly fed induction generators (DFIG) and squirrel cage induction generators (SCIG). The proposed control system aims to control voltage, frequency, and mechanical power in the wind farms under wind/load alterations, faults, and outages. The voltage stability and fault ride through capability are improved. The proposed model also deals with unbalanced loading and faulty conditions. All the aforementioned points are realized under both off-grid and grid-tied conditions. For voltage stability improvement, each wind farm is integrated with one static VAR compensator (SVC) and the grid-side is integrated with one static synchronous compensator (STATCOM). In the grid-tied, the resilience following events is improved by proper control of STATCOM. In the off-grid, the installed SVC at each site is responsible for increasing resilience. The proposed control systems are modeled and implemented on a typical test grid, and numerical simulations are carried out in MATLAB/SIMULINK software. It is demonstrated that the proposed multi-objective control scheme efficiently controls all individual wind farms, achieves a coordinated management between different wind farms, deals with stability/unbalanced operating condition/faults, increases resilience and improves fault ride through capability. [ABSTRACT FROM AUTHOR]