Search

This paper describes a solid-state asymmetric bridge resonant topology to increase the energy efficiency of switching pulse modulators. The solid-state resonant topology will replace an existing pulse transformer and thyratron-based resonant modulator to supply the 60-kV target potential for the ion acceleration of the On-Line Isotope Mass Separator ISOLDE accelerator. An experimental prototype is tested in order to validate the proposed concept, including a low auxiliary voltage power supply to compensate the losses in the circuit. The design of the circuit components and the experimental results for a 6-kV prototype are presented and discussed, as well as the design procedure and parameters for the 60-kV modulator, including a high-voltage gapped coil core. [ABSTRACT FROM AUTHOR]

Two solid-state bipolar Marx modulators are analyzed and compared regarding hold-off semiconductor voltages and open-fault tolerance capability. Normal and abnormal operating conditions are considered, such as switch synchronization mismatches, failures, and open faults. Ten-stage laboratory prototypes of two bipolar Marx modulators have been assembled using 1200-V insulated gate bipolar transistors and matching diodes, to operate at 500-V dc input voltage. Outputs are 4-kV bipolar pulses, 1% duty ratio, into resistive loads, and 1-kHz frequency. Lack of synchronization and open-fault tests confirm that only topologies with redundant switches can operate without semiconductors being subjected to double hold-off voltages while presenting current paths to clear faults. [ABSTRACT FROM PUBLISHER]

This paper presents the effect of stray capacitances in bipolar (negative and/or positive) pulses generated by the two different topologies of the solid-state Marx modulators. According to the analysis, the stray capacitances influence the energy transfer from the Marx modulator capacitors to the load affecting the bipolar (negative and/or positive) pulse rise time. This paper deals with the structure design to reduce the influence of the stray capacitance and to improve the pulse rise time of these bipolar solid-state Marx modulators. A four-stage laboratory prototype of the two topologies has been assembled using 1200-V insulated gate bipolar transistors and diodes, operating with 1000-V dc input voltage and 1-kHz frequency, producing 4-kV bipolar pulses, with 5- \mu \texts pulse duration and 120-ns rise time, into a resistive load. [ABSTRACT FROM PUBLISHER]

A new circuit topology is proposed to replace the actual pulse transformer and thyratron based resonant modulator that supplies the 60 kV target potential for the ion acceleration of the On-Line Isotope Mass Separator accelerator, the stability of which is critical for the mass resolution downstream separator, at the European Organization for Nuclear Research. The improved modulator uses two solid-state switches working together, each one based on the Marx generator concept, operating as series and parallel switches, reducing the stress on the series stacked semiconductors, and also as auxiliary pulse generator in order to fulfill the target requirements. Preliminary results of a 10 kV prototype, using 1200 V insulated gate bipolar transistors and capacitors in the solid-state Marx circuits, ten stages each, with an electrical equivalent circuit of the target, are presented, demonstrating both the improved voltage stability and pulse flexibility potential wanted for this new modulator. [ABSTRACT FROM AUTHOR]