Search

Biodegradable conductive films are crucial for the sustainable development of wearable electronics. In this work, a flexible and degradable conductive film was prepared based on a carefully designed interface of polylactic acid (PLA) electrospun fibers and silver nanowires (AgNWs). The amphiphilic triblock copolymer was added to PLA solution for electrospinning, followed by solvent posttreatment to induce the hydrophilic block of the amphiphilic triblock copolymer to migrate to the fiber surface. Dopamine can be uniformly polymerized on the surface of hydrophilic PLA fibers, and the prepared PLA@PDA fiber film can form a good interface combination with AgNWs. The electrical conductivity of AgNWs/PLA@PDA flexible film can reach 258.5 S cm−1, showing obvious Joule heating effect and good mechanical properties. Degradation experiments showed that in phosphate buffered saline, the PLA molecular chain showed a dynamic equilibrium due to the scission and rearrangement of the ester groups and degraded slowly, while AgNWs/PLA@PDA degraded rapidly under alkaline conditions. Our study provides a simple and controllable method to prepare flexible degradable electronic films, which is expected to be applied to flexible wearable bioelectrodes. [ABSTRACT FROM AUTHOR]

The shapes of micro‐ and nano‐products have profound influences on their functional performances, which has not received sufficient attention during the past several decades. Electrohydrodynamic atomization (EHDA) techniques, mainly include electrospinning and electrospraying, are facile in manipulate their products' shapes. In this review, the shapes generated using EHDA for modifying drug release profiles are reviewed. These shapes include linear nanofibers, round micro‐/nano‐particles, and beads‐on‐a‐string hybrids. They can be further divided into different kinds of sub‐shapes, and can be explored for providing the desired pulsatile release, sustained release, biphasic release, delayed release, and pH‐sensitive release. Additionally, the shapes resulted from the organizations of electrospun nanofibers are discussed for drug delivery, and the shapes and inner structures can be considered together for developing novel drug delivery systems. In future, the shapes and the related shape–performance relationships at nanoscale, besides the size, inner structure and the related structure–performance relationships, would further play their important roles in promoting the further developments of drug delivery field. This article is categorized under:Therapeutic Approaches and Drug Discovery > Emerging Technologies [ABSTRACT FROM AUTHOR]

For the first time, biocompatible and biodegradable Ta-metal organic framework (MOF) polyether block amide (PEBA) fibrous polymeric nanostructures were synthesized by ultrasonic and electrospinning routes in this study. The XRD peaks of products were wider, which is due to the significant effect of the ultrasonic and electrospinning methods on the final product. The adsorption/desorption behavior of the nanostructures is similar to that of the third type of isotherm series, which showed mesoporous behavior for the products. The sample has uniform morphology without any evidence of agglomeration. Since the adsorption and trapping of gaseous pollutants are very important, the application of the final Ta-MOF/PEBA fibrous polymeric nanostructures was investigated for CH4 adsorption. In order to achieve the optimal conditions of experiments and also systematic studies of the parameters, fractional factorial design was used. The results showed that by selecting temperature 40°C, time duration 35 min, and pressure 3 bar, the >H4 gas adsorption rate was near 4 mmol/g. Ultrasonic and electrospinning routes as well as immobilization of Ta-MOF in the PEBA fibrous network affect the performance of the final products for CH4 gas adsorption. [ABSTRACT FROM AUTHOR]

In this study, three kinds of electrohydrodynamic atomization (EHDA) processes (electrospraying, electrospinning, and coaxial electrospinning) are implemented to create hydroxypropyl methylcellulose (HPMC) based ultra‐thin products for providing the fast dissolution of a poorly water‐soluble drug ketoprofen (KET). An EHDA apparatus, characterized by a novel spinneret, is homemade for conducting the three processes. The three types of products are electrospun nanofibers E1, electrosprayed microparticles E2, and core‐shell nanofibers E3. SEM and TEM results indicate that they have the anticipated morphologies and inner structures. X‐ray diffraction and Fourier Transform Infrared results verify that KET is mainly amorphous in all the composites due to its fine compatibility with HPMC. In vitro dissolution tests demonstrate that the drug rapid release performances has an order of E3>E1>E2≫KET powders. The fast dissolution mechanisms are suggested and the advantages of the three products are compared. The super performance of E3 in furnishing the rapid release is attributed to a synergistic action of small size (of the shell thickness), high porosity, amorphous state of drug, and the solubility of HPMC. EHDA nanostructures can support the development of nano drug delivery systems (DDSs) through tailoring the spatial distribution of drug molecules within the nano products. [ABSTRACT FROM AUTHOR]

Core–shell structure is a concentric circle structure found in nature. The rapid development of electrospinning technology provides more approaches for the production of core–shell nanofibers. The nanoscale effects and expansive specific surface area of core–shell nanofibers can facilitate the dissolution of drugs. By employing ingenious structural designs and judicious polymer selection, specialized nanofiber drug delivery systems can be prepared to achieve controlled drug release. The synergistic combination of core–shell structure and materials exhibits a strong strategy for enhancing the drug utilization efficiency and customizing the release profile of drugs. Consequently, multi‐chamber core–shell nanofibers hold great promise for highly efficient disease treatment. However, little attention concentration is focused on the effect of multi‐chamber core–shell nanofibers on controlled release of drugs. In this review, we introduced different fabrication techniques for multi‐chamber core–shell nanostructures, including advanced electrospinning technologies and surface functionalization. Subsequently, we reviewed the different controlled drug release behaviors of multi‐chamber core–shell nanofibers and their potential needs for disease treatment. The comprehensive elucidation of controlled release behaviors based on electrospun multi‐chamber core–shell nanostructures could inspire the exploration of novel controlled delivery systems. Furthermore, once these fibers with customizable drug release profiles move toward industrial mass production, they will potentially promote the development of pharmacy and the treatment of various diseases. This article is categorized under:Therapeutic Approaches and Drug Discovery > Emerging Technologies [ABSTRACT FROM AUTHOR]

The past two decades have witnessed the enormous success and progress of electrospinning, as well as its broad and useful applications in pharmaceutics as a laboratory pharmaceutical nanotechnology. Everything in the past is a preface, in which the large screen opens for electrospinning and electrospun nanofibers (particularly those multiple-fluid electrospinning processes and the related multiple-chamber nanostructures) to stride into a new stage and the real commercial applications. In this commentary, four hot regions are identified for the further progress of the applications of electrospinning in pharmaceutics, in which electrospinning and its products can provide more and better services to the development of pharmaceutics. [ABSTRACT FROM AUTHOR]

Polymers are the backbone of drug delivery. Electrospinning has greatly enriched the strategies that have been explored for developing novel drug delivery systems using polymers during the past two decades. In this study, four different kinds of polymers, i.e., the water-soluble polymer poly (vinyl alcohol) (PVA), the insoluble polymer poly(ε-caprolactone) (PCL), the insoluble polymer Eudragit RL100 (ERL100) and the pH-sensitive polymer Eudragit S100 (ES100) were successfully converted into types of tri-layer tri-polymer core–shell fibers through bi-fluid coaxial electrospinning. During the coaxial process, the model drug metronidazole (MTD) was loaded into the shell working fluid, which was an emulsion. The micro-formation mechanism of the tri-layer core–shell fibers from the coaxial emulsion electrospinning was proposed. Scanning electron microscope and transmission electron microscope evaluations verified the linear morphology of the resultant fibers and their obvious tri-layer multiple-chamber structures. X-ray diffraction and Fourier transform infrared spectroscopy measurements demonstrated that the drug MTD presented in the fibers in an amorphous state and was compatible with the three polymeric matrices. In vitro dissolution tests verified that the three kinds of polymer could act in a synergistic manner for a prolonged sustained-release profile of MTD in the gut. The drug controlled-release mechanisms were suggested in detail. The protocols reported here pioneer a new route for creating a tri-layer core–shell structure from both aqueous and organic solvents, and a new strategy for developing advanced drug delivery systems with sophisticated drug controlled-release profiles. [ABSTRACT FROM AUTHOR]

In this nanotechnology era, nanostructures play a crucial role in the investigation of novel functional nanomaterials. Complex nanostructures and their corresponding fabrication techniques provide powerful tools for the development of high-performance functional materials. In this study, advanced micro-nanomanufacturing technologies and composite micro-nanostructures were applied to the development of a new type of pharmaceutical formulation, aiming to achieve rapid hemostasis, pain relief, and antimicrobial properties. Briefly, an approach combining a electrohydrodynamic atomization (EHDA) technique and reversed-phase solvent was employed to fabricate a novel beaded nanofiber structure (BNS), consisting of micrometer-sized particles distributed on a nanoscale fiber matrix. Firstly, Zein-loaded Yunnan Baiyao (YB) particles were prepared using the solution electrospraying process. Subsequently, these particles were suspended in a co-solvent solution containing ciprofloxacin (CIP) and hydrophilic polymer polyvinylpyrrolidone (PVP) and electrospun into hybrid structural microfibers using a handheld electrospinning device, forming the EHDA product E3. The fiber-beaded composite morphology of E3 was confirmed through scanning electron microscopy (SEM) images. Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis revealed the amorphous state of CIP in the BNS membrane due to the good compatibility between CIP and PVP. The rapid dissolution experiment revealed that E3 exhibits fast disintegration properties and promotes the dissolution of CIP. Moreover, in vitro drug release study demonstrated the complete release of CIP within 1 min. Antibacterial assays showed a significant reduction in the number of adhered bacteria on the BNS, indicating excellent antibacterial performance. Compared with the traditional YB powders consisting of Chinese herbs, the BNS showed a series of advantages for potential wound dressing. These advantages include an improved antibacterial effect, a sustained release of active ingredients from YB, and a convenient wound covering application, which were resulted from the integration of Chinese herbs and Western medicine. This study provides valuable insights for the development of novel multiscale functional micro-/nano-composite materials and pioneers the developments of new types of medicines from the combination of herbal medicines and Western medicines. [ABSTRACT FROM AUTHOR]

In this nano era, nanomaterials and nanostructures are popular in developing novel functional materials. However, the combinations of materials at micro and macro scales can open new routes for developing novel trans-scale products with improved or even new functional performances. In this work, a brand-new hybrid, containing both nanofibers and microparticles, was fabricated using a sequential electrohydrodynamic atomization (EHDA) process. Firstly, the microparticles loaded with drug (berberine hydrochloride, BH) molecules in the cellulose acetate (CA) were fabricated using a solution electrospraying process. Later, these microparticles were suspended into a co-dissolved solution that contained BH and a hydrophilic polymer (polypyrrolidone, PVP) and were co-electrospun into the nanofiber/microparticle hybrids. The EHDA processes were recorded, and the resultant trans-scale products showed a typical hybrid topography, with microparticles distributed all over the nanofibers, which was demonstrated by SEM assessments. FTIR and XRD demonstrated that the components within the hybrids were presented in an amorphous state and had fine compatibility with each other. In vitro dissolution tests verified that the hybrids were able to provide the designed dual-step drug release profiles, a combination of the fast release step of BH from the hydrophilic PVP nanofibers through an erosion mechanism and the sustained release step of BH from the insoluble CA microparticles via a typical Fickian diffusion mechanism. The present protocols pave a new way for developing trans-scale functional materials. [ABSTRACT FROM AUTHOR]

Dyes, antibiotics, heavy metal ions, and bacteria are important sources of water pollution. How to solve these issues has become a problem in the fields of science and technology. People have developed a variety of technologies to treat pollutants in water. Photocatalytic technology came into being. As a simple and environmentally friendly treatment technology, it has been widely studied by the scientific community. Traditional powder photocatalysts cause secondary pollution to the environment and are not conducive to recycling. Therefore, large specific surface area and reusable membrane photocatalysts built by electrospinning technology have become a favorite of today's scientific community. Nanofiber membranes prepared by electrospinning technology have a variety of structures, which can meet the needs of different occasions. This review summarizes and discusses research progress in electrospinning technology, the relationship between the structure and treatment of electrospun fiber membranes, and their impacts on the photocatalytic performance of nanofiber membranes. The performance, challenges, and future development directions of nanofiber membranes with different structures, prepared by different kinds of electrospinning techniques using photocatalysis to treat different pollutants, are reviewed. [ABSTRACT FROM AUTHOR]

This study presents a glucose biosensor based on electrospun core–sheath nanofibers. Two types of film were fabricated using different electrospinning procedures. Film F1 was composed solely of core–sheath nanofibers fabricated using a modified coaxial electrospinning process. Film F2 was a double-layer hybrid film fabricated through a sequential electrospinning and blending process. The bottom layer of F2 comprised core–sheath nanofibers fabricated using a modified process, in which pure polymethacrylate type A (Eudragit L100) was used as the core section and water-soluble lignin (WSL) and phenol were loaded as the sheath section. The top layer of F2 contained glucose oxidase (GOx) and gold nanoparticles, which were distributed throughout the polyvinylpyrrolidone K90 (PVP K90) nanofibers through a single-fluid blending electrospinning process. The study investigated the sequential electrospinning process in detail. The experimental results demonstrated that the F2 hybrid film had a higher degradation efficiency of β-D-glucose than F1, reaching a maximum of over 70% after 12 h within the concentration range of 10–40 mmol/L. The hybrid film F2 is used for colorimetric sensing of β-D-glucose in the range of 1–15 mmol/L. The solution exhibited a color that deepened gradually with an increase in β-D-glucose concentration. Electrospinning is flexible in creating structures for bio-cascade reactions, and the double-layer hybrid film can provide a simple template for developing other sensing nanomaterials. [ABSTRACT FROM AUTHOR]

Electrospun porous nanofibers have gained a lot of interest recently in various fields because of their adjustable porous structure, high specific surface area, and large number of active sites, which can further enhance the performance of materials. This paper provides an overview of the common polymers, preparation, and applications of electrospun porous nanofibers. Firstly, the polymers commonly used to construct porous structures and the main pore-forming methods in porous nanofibers by electrospinning, namely the template method and phase separation method, are introduced. Secondly, recent applications of electrospun porous nanofibers in air purification, water treatment, energy storage, biomedicine, food packaging, sensor, sound and wave absorption, flame retardant, and heat insulation are reviewed. Finally, the challenges and possible research directions for the future study of electrospun porous nanofibers are discussed. [ABSTRACT FROM AUTHOR]

Students' behaviors have a close relationship with their learning efficiencies, particularly about professional knowledge. Different types of behaviors should have different influences. Disclosing the special relationship between undergraduate students' conscious safety behaviors in their laboratory experiments with their learning efficiencies is important for fostering them into professional talents. In this study, a course entitled "Advanced Methods of Materials Characterization" was arranged to contain three sections: theoretical learning in the classroom, eight characterization experiments in the laboratory in sequence, and self-training to apply the knowledge. In the final examination, eighteen percent was allocated to the examination questions about safety issues. The students' scores for this section were associated with their total roll scores. Two quantitative relationships are disclosed. One is between the students' final examination score (y) and their subjective consciousness of safety behaviors (x) in their laboratory experiments, as y = 5.56 + 4.83 x (R = 0.9192). The other is between their grade point average (y) and safety behavior evaluation (x) as y = 0.51 + 0.15 x (R = 0.7296). Undergraduate students' behaviors in scientific laboratories need to be verified to have a close and positive relationship with their professional knowledge learning efficiencies. This offers a hint that improving students' safety behaviors and enhancing their subjective safety awareness are conducive to improving their learning efficiency for professional knowledge. [ABSTRACT FROM AUTHOR]

Herbal medicine has a long history of medical efficacy with low toxicity, side effects and good biocompatibility. However, the bioavailability of the extract of raw herbs and bioactive compounds is poor because of their low water solubility. In order to overcome the solubility issues, electrospinning technology can offer a delivery alternative to resolve them. The electrospun fibers have the advantages of high specific surface area, high porosity, excellent mechanical strength and flexible structures. At the same time, various natural and synthetic polymer-bound fibers can mimic extracellular matrix applications in different medical fields. In this paper, the development of electrospinning technology and polymers used for incorporating herbal medicine into electrospun nanofibers are reviewed. Finally, the recent progress of the applications of these herbal medicine nanofibers in biomedical (drug delivery, wound dressing, tissue engineering) and food fields along with their future prospects is discussed. [ABSTRACT FROM AUTHOR]

Chronic diabetic wounds are one of the main complications of diabetes, manifested by persistent inflammation, decreased epithelialization motility, and impaired wound healing. This will not only lead to the repeated hospitalization of patients, but also bear expensive hospitalization costs. In severe cases, it can lead to amputation, sepsis or death. Electrospun nanofibers membranes have the characteristics of high porosity, high specific surface area, and easy functionalization of structure, so they can be used as a safe and effective platform in the treatment of diabetic wounds and have great application potential. This article briefly reviewed the pathogenesis of chronic diabetic wounds and the types of dressings commonly used, and then reviewed the development of electrospinning technology in recent years and the advantages of electrospun nanofibers in the treatment of diabetic wounds. Finally, the reports of different types of nanofiber dressings on diabetic wounds are summarized, and the method of using multi-drug combination therapy in diabetic wounds is emphasized, which provides new ideas for the effective treatment of diabetic wounds. [ABSTRACT FROM AUTHOR]

Electrospinning is an advanced technology for the preparation of drug-carrying nanofibers that has demonstrated great advantages in the biomedical field. Electrospun nanofiber membranes are widely used in the field of drug administration due to their advantages such as their large specific surface area and similarity to the extracellular matrix. Different electrospinning technologies can be used to prepare nanofibers of different structures, such as those with a monolithic structure, a core–shell structure, a Janus structure, or a porous structure. It is also possible to prepare nanofibers with different controlled-release functions, such as sustained release, delayed release, biphasic release, and targeted release. This paper elaborates on the preparation of drug-loaded nanofibers using various electrospinning technologies and concludes the mechanisms behind the controlled release of drugs. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a novel ultrathin fibrous membrane with a core–sheath structure as an antioxidant food packaging membrane. The core–sheath structure was prepared by coaxial electrospinning, and the release of active substances was regulated by its special structure. Ferulic acid (FA) was incorporated into the electrospun zein/polyethylene oxide ultrathin fibers to ensure their synergistic antioxidant properties. We found that the prepared ultrathin fibers had a good morphology and smooth surface. The internal structure of the fibers was stable, and the three materials that we used were compatible. For the different loading positions, it was observed that the core layer ferulic-acid-loaded fibers had a sustained action, while the sheath layer ferulic-acid-loaded fibers had a pre-burst action. Finally, apples were selected for packaging using fibrous membranes to simulate practical applications. The fibrous membrane was effective in reducing water loss and apple quality loss, as well as extending the shelf life. According to these experiments, the FA-loaded zein/PEO coaxial electrospinning fiber can be used as antioxidant food packaging and will also undergo more improvements in the future. [ABSTRACT FROM AUTHOR]

Since the third scientific and technological revolution, electronic information technology has developed rapidly, and piezoelectric materials that can convert mechanical energy into electrical energy have become a research hotspot. Among them, piezoelectric polymers are widely used in various fields such as water treatment, biomedicine, and flexible sensors due to their good flexibility and weak toxicity. However, compared with ceramic piezoelectric materials, the piezoelectric properties of polymers are poor, so it is very important to improve the piezoelectric properties of polymers. Electrospinning technology can improve the piezoelectric properties of piezoelectric polymers by adjusting electrospinning parameters to control the piezoelectrically active phase transition of polymers. In addition, the prepared nanofibrous membrane is also a good substrate for supporting piezoelectric functional particles, which can also effectively improve the piezoelectric properties of polymers by doping particles. This paper reviews the piezoelectric properties of various electrospun piezoelectric polymer membranes, especially polyvinylidene fluoride (PVDF)-based electrospun nanofibrous membranes (NFs). Additionally, this paper introduces the various methods for increasing piezoelectric properties from the perspective of structure and species. Finally, the applications of NFs in the fields of biology, energy, and photocatalysis are discussed, and the future research directions and development are prospected. [ABSTRACT FROM AUTHOR]

Electrospun porous nanofibers have large specific surface areas and abundant active centers, which can effectively improve the properties of nanofibers. In the field of photocatalysis, electrospun porous nanofibers can increase the contact area of loaded photocatalytic particles with light, shorten the electron transfer path, and improve photocatalytic activity. In this paper, the main pore−forming mechanisms of electrospun porous nanofiber are summarized as breath figures, phase separation (vapor−induced phase separation, non−solvent−induced phase separation, and thermally induced phase separation) and post−processing (selective removal). Then, the application of electrospun porous nanofiber loading photocatalytic particles in the degradation of pollutants (such as organic, inorganic, and bacteria) in water is introduced, and its future development prospected. Although porous structures are beneficial in improving the photocatalytic performance of nanofibers, they reduce their mechanical properties. Therefore, strategies for improving the mechanical properties of electrospun porous nanofibers are also briefly discussed. [ABSTRACT FROM AUTHOR]

Oral ulcers affect oral and systemic health and have high prevalence in the population. There are significant individual differences in the etiology and extent of the disease among patients. In the treatment of oral ulcers, nanofiber films can control the drug-release rate and enable long-term local administration. Compared to other drug-delivery methods, nanofiber films avoid the disadvantages of frequent administration and certain side effects. Electrospinning is a simple and effective method for preparing nanofiber films. Currently, electrospinning technology has made significant breakthroughs in energy-saving and large-scale production. This paper summarizes the polymers that enable oral mucosal adhesion and the active pharmaceutical ingredients used for oral ulcers. Moreover, the therapeutic effects of currently available electrospun nanofiber films on oral ulcers in animal experiments and clinical trials are investigated. In addition, solvent casting and cross-linking methods can be used in conjunction with electrospinning techniques. Based on the literature, more administration systems with different polymers and loading components can be inspired. These administration systems are expected to have synergistic effects and achieve better therapeutic effects. This not only provides new possibilities for drug-loaded nanofibers but also brings new hope for the treatment of oral ulcers. [ABSTRACT FROM AUTHOR]

Bleeding control plays a very important role in worldwide healthcare, which also promotes research and development of wound dressings. The wound healing process involves four stages of hemostasis, inflammation, proliferation and remodeling, which is a complex process, and wound dressings play a huge role in it. Electrospinning technology is simple to operate. Electrospun nanofibers have a high specific surface area, high porosity, high oxygen permeability, and excellent mechanical properties, which show great utilization value in the manufacture of wound dressings. As one of the most popular reactive and functional synthetic polymers, polyacrylonitrile (PAN) is frequently explored to create nanofibers for a wide variety of applications. In recent years, researchers have invested in the application of PAN nanofibers in wound dressings. Research on spun nanofibers is reviewed, and future development directions and prospects of electrospun PAN nanofibers for wound dressings are proposed. [ABSTRACT FROM AUTHOR]

The purpose of this work is to develop a novel ultrathin fibrous membrane with a core-sheath structure as antibacterial food packaging film. Coaxial electrospinning was exploited to create the core-sheath structure, by which the delivery regulation of the active substance was achieved. Resveratrol (RE) and silver nanoparticles (AgNPs) were loaded into electrospun zein/polyethylene oxide ultrathin fibers to ensure a synergistic antibacterial performance. Under the assessments of a scanning electron microscope and transmission electron microscope, the ultrathin fiber was demonstrated to have a fine linear morphology, smooth surface and obvious core-sheath structure. X-ray diffraction and Fourier transform infrared analyses showed that RE and AgNPs coexisted in the ultrathin fibers and had good compatibility with the polymeric matrices. The water contact angle experiments were conducted to evaluate the hydrophilicity and hygroscopicity of the fibers. In vitro dissolution tests revealed that RE was released in a sustained manner. In the antibacterial experiments against Staphylococcus aureus and Escherichia coli, the diameters of the inhibition zone of the fiber were 8.89 ± 0.09 mm and 7.26 ± 0.10 mm, respectively. Finally, cherry tomatoes were selected as the packaging object and packed with fiber films. In a practical application, the fiber films effectively reduced the bacteria and decreased the quality loss of cherry tomatoes, thereby prolonging the fresh-keeping period of cherry tomatoes to 12 days. Following the protocols reported here, many new food packaging films can be similarly developed in the future. [ABSTRACT FROM AUTHOR]

The timely and effective control and repair of wound bleeding is a key research issue all over the world. From traditional compression hemostasis to a variety of new hemostatic methods, people have a more comprehensive understanding of the hemostatic mechanism and the structure and function of different types of wound dressings. Electrospun nanofibers stand out with nano size, high specific surface area, higher porosity, and a variety of complex structures. They are high-quality materials that can effectively promote wound hemostasis and wound healing because they can imitate the structural characteristics of the skin extracellular matrix (ECM) and support cell adhesion and angiogenesis. At the same time, combined with amino acid polymers with good biocompatibility not only has high compatibility with the human body but can also be combined with a variety of drugs to further improve the effect of wound hemostatic dressing. This paper summarizes the application of different amino acid electrospun wound dressings, analyzes the characteristics of different materials in preparation and application, and looks forward to the development of directions of poly(amino acid) electrospun dressings in hemostasis. [ABSTRACT FROM AUTHOR]

One of the most important trends in developments in electrospinning is to combine itself with traditional materials production and transformation methods to take advantage of the unique properties of nanofibers. In this research, the single-fluid blending electrospinning process was combined with the casting film method to fabricate a medicated double-layer hybrid to provide a dual-phase drug controlled release profile, with ibuprofen (IBU) as a common model of a poorly water-soluble drug and ethyl cellulose (EC) and polyvinylpyrrolidone (PVP) K60 as the polymeric excipients. Electrospun medicated IBU-PVP nanofibers (F7), casting IBU-EC films (F8) and the double-layer hybrid films (DHFs, F9) with one layer of electrospun nanofibers containing IBU and PVP and the other layer of casting films containing IBU, EC and PVP, were prepared successfully. The SEM assessments demonstrated that F7 were in linear morphologies without beads or spindles, F8 were solid films, and F9 were composed of one porous fibrous layer and one solid layer. XRD and FTIR results verified that both EC and PVP were compatible with IBU. In vitro dissolution tests indicated that F7 were able to provide a pulsatile IBU release, F8 offered a typical drug sustained release, whereas F9 were able to exhibit a dual-phase controlled release with 40.3 ± 5.1% in the first phase for a pulsatile manner and the residues were released in an extended manner in the second phase. The DHFs from a combination of electrospinning and the casting method pave a new way for developing novel functional materials. [ABSTRACT FROM AUTHOR]

Among different kinds of modified release profiles, sustained drug release (SDR) has received the most attention due to its capability to provide a "safe, efficacious, and convenient" drug delivery effect. Electrospun nanofibers have shown their popularity in this interdisciplinary field, as demonstrated by the first reports about SDRs on drug delivery applications of blended nanofibers and core–shell nanofibers. Along with the evolution of electrospinning from a single‐fluid blending process to coaxial, tri‐axial, side‐by‐side, and other multi‐fluid processes, more multi‐chamber nanostructures can be created through a single‐step straight forward manner. These multi‐chamber nanostructures can act as a powerful platform to support a wide variety of new strategies for the development of novel SDR nanomaterials. Thus, this review describes a combination history of electrospinning and SDR and its further development trend. After a summary of the presently popular multi‐chamber core–shell nanostructures, 15 strategies for furnishing SDR profiles are categorized and exemplified. The perspectives of electrospun multi‐chamber nanostructures for further promoting SDR are narrated. This article is categorized under:Therapeutic Approaches and Drug Discovery > Emerging Technologies [ABSTRACT FROM AUTHOR]

Nanomaterials for air filtration have been studied by researchers for decades. Owing to the advantages of high porosity, small pore size, and good connectivity, nanofiber membranes prepared by electrospinning technology have been considered as an outstanding air-filter candidate. To satisfy the requirements of material functionalization, electrospinning can provide a simple and efficient one-step process to fabricate the complex structures of functional nanofibers such as core–sheath structures, Janus structures, and other multilayered structures. Additionally, as a nanoparticle carrier, electrospun nanofibers can easily achieve antibacterial properties, flame-retardant properties, and the adsorption properties of volatile gases, etc. These simple and effective approaches have benefited from the significate development of electrospun nanofibers for air-filtration applications. In this review, the research progress on electrospun nanofibers as air filters in recent years is summarized. The fabrication methods, filtration performances, advantages, and disadvantages of single-polymer nanofibers, multipolymer composite nanofibers, and nanoparticle-doped hybrid nanofibers are investigated. Finally, the basic principles of air filtration are concluded upon and prospects for the application of complex-structured nanofibers in the field of air filtration are proposed. [ABSTRACT FROM AUTHOR]

Particulate matter (PM) pollution in air has imposed huge threaten and burden to public health, the global economy, and ecosystems. Air filtration, as an effective and timely strategy to remove PMs, is thus increasingly particularly crucial. Electrospun nanofibers exhibit integrated properties of nanoscale fiber diameter, small pore size, high porosity, and tunable surface wettability, and thus have gained extensive concern and hold great promise as building blocks for high-performance air filter. This review primarily focuses on the latest progress in the design principles, controllable fabrication, and application performance of electrospun nanofiber filters for high-performance air filtration. The brief overview of definition and type of PMs, filtration mechanism, and performance evaluation are first concisely given. Then, the preparation strategy, structural regulation, and application performance of electrospun nanofibrous filters categorized by passive or proactive PM trapping mechanisms are comprehensively highlighted. More importantly, the detailed application area, current challenge, and future trend of electrospun nanofiber filters are introduced and discussed. This review is expected to provide guidance for researchers to investigate the recent progress and application of electrospun nanofibers for air filtration. [Display omitted] • Mechanism, design, and fabrication of nanofibrous air filters by electrospinning are reviewed. • Electrospun nanofiber filters with various structures and surface properties are highlighted. • Properties and performances for current applications of nanofiber filters are provided. • Future trend and challenges of electrospun nanofiber filters are discussed. [ABSTRACT FROM AUTHOR]

Abstract The development of oral dosage forms for poorly water-soluble active pharmaceutical ingredients (APIs) is a persistent challenge. A range of methods has been explored to address this issue, and amorphous solid dispersions (ASDs) have received increasing attention. ASDs are typically prepared by starting with a liquid precursor (a solution or melt) and applying energy for solidification. Many techniques can be used, with the emergence of electrospinning as a potent option in recent years. This method uses electrical energy to induce changes from liquid to solid. Through the direct applications of electrical energy, electrospinning can generate nanofiber-based ASDs from drug-loaded solutions, melts and melt-solutions. The technique can also be combined with other approaches using the application of mechanical, thermal or other energy sources. Electrospinning has numerous advantages over other approaches to produce ASDs. These advantages include extremely rapid drying speeds, ease of implentation, compatibility with a wide range of active ingredients (including those which are thermally labile), and the generation of products with large surface areas and high porosity. Furthermore, this technique exhibits the potential to create so-called 'fifth-generation' ASDs with nanostructured architectures, such as core/shell or Janus systems and their combinations. These advanced systems can improve dissolution behaviour and provide programmable drug release profiles. Additionally, the fiber components and their spatial distributions can be precisely controlled. Electrospun fiber-based ASDs can maintain an incorporated active ingredient in the amorphous physical form for prolonged periods of time because of their homogeneous drug distribution within the polymer matrix (typically they comprise solid solutions), and ability to inhibit molecular motion. These ASDs can be utilised to generate oral dosage forms for poorly water-soluble drugs, resulting in linear or multiple-phase release of one or more APIs. Electrospun ASDs can also be exploited as templates for manipulating molecular self-assembly, offering a bridge between ASDs and other types of dosage forms. This review addresses the development, advantages and pharmaceutical applications of electrospinning for producing polymeric ASDs. Material preparation and analysis procedures are considered. The mechanisms through which performance has been improved are also discussed. Graphical abstract Unlabelled Image [ABSTRACT FROM AUTHOR]

Facile methods to improve the dissolution rate of poorly water-soluble drugs are highly sought after. In this study, a modified coaxial electrospinning process was exploited to create medicated amorphous nanocomposites, an approach characterized by the application of a Teflon-coated coaxial spinneret. The hydrophilic polymer hydroxypropyl methylcellulose and the active ingredient tamoxifen citrate (TAM) were selected as the drug carrier and model drug, respectively. Their electrospun nanocomposites showed linear morphology with the drug presented in an amorphous state. The loaded cargoes could be released from the nanocomposites simultaneously when they were placed in the dissolution media, showing faster dissolution rates than their counterparts (physical mixtures). Based on the reasonable application of the polymeric carrier, the reported protocols not only provided an approach to enhance the dissolution of poorly water-soluble drugs, but also exhibited a method to facilitate the implementation of coaxial electrospinning. [ABSTRACT FROM AUTHOR]

Hypromellose (HPMC)-based hydrophilic composites (HCs) used for rapid dissolution of ferulic acid (FA) were investigated. Electrospun and casting HCs were prepared from a solution containing HPMC, FA, and polyethylene glycol. Ethanol was used as sheath fluid during coaxial processes, and the effects of its flow rates on the Taylor cone and straight fluid jet were investigated. The morphology, component state, hydrophilicity, and drug dissolution rate of the HCs were characterized. Results demonstrated that all HCs were amorphous materials, and their components were compatible. However, the dissolution rate of electrospun HCs was 10 times faster than that of casting HCs. The smaller the diameters of electrospun HCs were, the better their performances were. The mechanism of electrospun HCs was suggested. By utilizing modified coaxial electrospinning and combinations of drug carriers, new types of HPMC-based HCs can provide an alternative approach for the effective delivery of poorly water-soluble drugs. [ABSTRACT FROM AUTHOR]

ABSTRACT Fiber membrane adsorbent not only has the advantage of ease of handling, but also offers high specific surface area that can benefit the adsorption process when compared with powdered adsorbent. In this work, a poly(2-aminothiazole) (PAT)/cellulose acetate (CA) composite fiber membrane is prepared by a coaxial electrospinning process, and used as adsorbent for removing Hg(II) from water. The adsorption processes are investigated as functions of pH value, contact time and temperature. The results suggest that the Hg(II) adsorption is preferred to be conducted at pH 6.5 and the adsorption is a monolayer process through chemical interaction. The maximum adsorption capacity in theory is 177 mg/g at 298 K with a very low PAT percentage (6.5 wt %), which is much higher than that of the nanoparticle-type PAT through conversion. Desorption results exhibit excellent reusability of the composite fiber membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44879. [ABSTRACT FROM AUTHOR]

Nanoscale drug depots, comprising a drug reservoir surrounded by a carrier membrane, are much sought after in contemporary pharmaceutical research. Using cellulose acetate (CA) as a filament-forming polymeric matrix and ferulic acid (FA) as a model drug, nanoscale drug depots in the form of core-shell fibers were designed and fabricated using a modified tri-axial electrospinning process. This employed a solvent mixture as the outer working fluid, as a result of which a robust and continuous preparation process could be achieved. The fiber-based depots had a linear morphology, smooth surfaces, and an average diameter of 0.62 ± 0.07 μm. Electron microscopy data showed them to have clear core-shell structures, with the FA encapsulated inside a CA shell. X-ray diffraction and IR spectroscopy results verified that FA was present in the crystalline physical form. In vitro dissolution tests revealed that the fibers were able to provide close to zero-order release over 36 h, with no initial burst release and minimal tailing-off. The release properties of the depot systems were much improved over monolithic CA/FA fibers, which exhibited a significant burst release and also considerable tailing-off at the end of the release experiment. Here we thus demonstrate the concept of using modified tri-axial electrospinning to design and develop new types of heterogeneous nanoscale biomaterials. Statement of Significance Nanoscale drug depots with a drug reservoir surrounded by a carrier are highly attractive in biomedicine. A cellulose acetate based drug depot was investigated in detail, starting with the design of the nanostructure, and moving through its fabrication using a modified tri-axial electrospinning process and a series of characterizations. The core-shell fiber-based drug depots can provide a more sustained release profile with no initial burst effect and less tailing-off than equivalent monolithic drug-loaded fibers. The drug release mechanisms are also distinct in the two systems. This proof-of-concept work can be further expanded to conceive a series of new structural biomaterials with improved or new functional performance. [ABSTRACT FROM AUTHOR]

A new type of medicated polymeric composite consisting of acyclovir (ACY), polyvinylpyrrolidone K60 (PVP) and polyethylene glycol 6000 (PEG) with core-shell structure were prepared by a coaxial electrospinning process. The composites could enhance the dissolution of the poorly water-soluble drug. The shell layers were formed from a spinnable working fluid containing the filament-forming PVP and citric acid while the core parts were prepared from an un-spinnable co-dissolving solution composed of ACY, sodium hydrate and PEG. Scanning electron microscope and transmission electron microscope observations demonstrated that the composites had a homogeneous linear topography with a slippery surface, a diameter of 670±130 nm, and an obvious core-shell structure. X-ray diffraction (XRD) and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy results demonstrated that the drug and citric acid contained in the core and shell parts were in an amorphous status. In vitro dissolution experiments exhibited that ACY was able to be free within 1 min, and the dissolution media were neutral due to acid-basic action within the core-shell structures. The medicated nanocomposites resulted from a combined usage of hydrophilic polymeric excipients PVP and PEG could provide a new solution to the problem associated with the dissolution of poorly water-soluble drugs. [ABSTRACT FROM AUTHOR]

Uniaxial alignment of electrospun fibers can provide a useful approach to develop novel functional nanomaterials for applications in a wide variety of fields. In this study, a polypropylene- (PP-) coated spinneret and a metal spinneret were utilized to carry out the single-fluid electrospinning processes. A metal rod frame was utilized as the collector to steer the nanofibers. Using polyvinylpyrrolidone K90 (PVP K90) as a filament-forming polymeric model at a concentration of 9% (w/v) in ethanol, the experimental observations and results demonstrated the following results: (1) the utilization efficiency of electrical energy could be improved through the PP-coated spinneret; (2) the texture of collector had a significant influence on the collection of aligned PVP K90 nanofibers; and (3) the combination of a PP-coated spinneret with the metal frame could ensure the electrostatic repulsion forces to play their roles effectively in generating PVP K90 nanofibers with thinner diameters and in collecting uniaxial alignment of them. The mechanisms about the orientation effects of the present method are discussed. This job opens a facile way for producing aligned polymeric nanofibers based on the reasonable manipulation of the interactions between the electrostatic field and the working fluids. [ABSTRACT FROM AUTHOR]

A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial process with only one of the three fluids being electrospinnable. Using an electrospinnable middle fluid of Eudragit S100 (ES100) with pure ethanol as the outer solvent and an unspinnable lecithin-diclofenac sodium (PL–DS) core solution, nanofibers with linear morphology and clear core/shell structures can be fabricated continuously and smoothly. X-ray diffraction proved that these nanofibers are structural nanocomposites with the drug present in an amorphous state. In vitro dissolution tests demonstrated that the formulations could preclude release in acidic conditions, and that the drug was released from the fibers in two successive steps at neutral pH. The first step is the dissolution of the shell ES100 and the conversion of the core PL–DS into sub-micron sized particles. This frees some DS into solution, and later the remaining DS is gradually released from the PL–DS particles through diffusion. Ex vivo permeation results showed that the composite nanofibers give a more than twofold uplift in the amount of DS passing through the colonic membrane as compared to pure DS; 74% of the transmitted drug was in the form of PL–DS particles. The new tri-axial electrospinning process developed in this work provides a platform to fabricate structural nanomaterials, and the core–shell polymer-PL nanocomposites we have produced have significant potential applications for oral colon-targeted drug delivery. Statement of Significance A modified tri-axial electrospinning is demonstrated to create a new type of core–shell pH-sensitive polymer/lipid nanocomposites, in which an electrospinnable middle fluid is exploited to support the un-spinnable outer and inner fluids. The structural nanocomposites are able to provide a colon-targeted sustained release and an enhanced permeation performance of diclofenac sodium. The developed tri-axial process can provide a platform for fabricating new structural nanomaterials with high quality. The strategy of a combined usage of polymeric excipients and phospholipid in a core–shell format should provide new possibilities of developing novel drug delivery systems for efficacious oral administration of poorly-water soluble drugs. [ABSTRACT FROM AUTHOR]

A family of medicated Janus fibers that provides highly tunable biphasic drug release was fabricated using a side-by-side electrospinning process employing a Teflon-coated parallel spinneret. The coated spinneret facilitated the formation of a Janus Taylor cone and in turn high quality integrated Janus structures, which could not be reliably obtained without the Teflon coating. The fibers prepared had one side consisting of polyvinylpyrrolidone (PVP) K60 and ketoprofen, and the other of ethyl cellulose (EC) and ketoprofen. To modulate and tune drug release, PVP K10 was doped into the EC side in some cases. The fibers were linear and had flat morphologies with an indent in the center. They provide biphasic drug release, with the PVP K60 side dissolving very rapidly to deliver a loading dose of the active ingredient, and the EC side resulting in sustained release of the remaining ketoprofen. The addition of PVP K10 to the EC side was able to accelerate the second stage of release; variation in the dopant amount permitted the release rate and extent this phase to be precisely tuned. These results offer the potential to rationally design systems with highly controllable drug release profiles, which can complement natural biological rhythms and deliver maximum therapeutic effects. [ABSTRACT FROM AUTHOR]

A series of 5-fluorouracil (5-FU) loaded core/shell electrospun fibers is reported. The fibers have shells made of Eudragit S100 (ES-100), and drug-loaded cores comprising poly(vinylpyrrolidone), ethyl cellulose, ES-100, or drug alone. Monolithic 5-FU loaded ES-100 fibers were also prepared for comparison. Electron microscopy showed all the fibers to have smooth cylindrical shapes, and clear core–shell structures were visible for all samples except the monolithic fibers. 5-FU was present in the amorphous physical form in all the materials prepared. Dissolution studies showed that the ES-100 shell was not able to prevent drug release at pH 1.0, even though the polymer is completely insoluble at this pH: around 30–80% of the maximum drug release was reached after 2 h immersion at pH 1.0. These observations are ascribed to the low molecular weight of 5-FU permitting it to diffuse through pores in the ES-100 coating, and the relatively high acid solubility of the drug providing a thermodynamic impetus for this to happen. In addition, the fibers were observed to be broken or merged following 2 h at pH 1.0, giving additional escape routes for the 5-FU. [ABSTRACT FROM AUTHOR]

This paper reports the investigation about the usage of an epoxy (EP)-coated spinneret for the preparation of medicated electrospun nanofibers. Cellulose acetate (CA) and acetaminophen (APAP) were used as the polymeric carrier and model drug, respectively. The electrospinning was undertaken using both EP-coated spinneret and traditional stainless steel capillary as spinnerets. According to the images from scanning electron microscopy, it is obvious that the nanofibers produced using the EP-coated spinneret had a finer diameter and a narrower size distribution (450±90 nm) than nanofibers fabricated using stainless steel equivalent (660±180 nm). In vitro dissolution tests revealed that the sustained-release profiles of nanofibers from the EP-coated spinneret were superior to those of their stainless steel equivalents, although APAP existed in a similar amorphous state in both nanofibers. Because the EP-coated material can exploit the electrical forces more effectively than its steel analogue, it can enhance the electrospinning technique for producing polymeric functional nanofibers. [ABSTRACT FROM AUTHOR]

The present study reports a new type of sedative nanofiber membranes that were developed to permit very rapid oral delivery of helicid with concomitant taste masking. A coaxial electrospinning process was exploited to prepare core-shell nanofibers and to control the spatial depositions of different functional components. A series of tests was undertaken to characterize the resultant nanofibers. Following optimization of the electrospinning parameters, two types of core-shell nanofibers with average diameters of 730 ± 140 and 770 ± 160 nm were successfully prepared. These had uniform linear morphologies and clear core-shell structures, as verified by scanning and transmission electron microscopy images. The fibers contained sucralose in the shell and helicid in the core; X-ray diffraction demonstrated that both functional components were present in the amorphous physical form. There is significant hydrogen bonding between the functional components and the poly(vinylpyrrolidone) used as the carrier matrix, as shown from Fourier transform infrared spectroscopy and molecular mechanics simulations. In vitro dissolution tests showed that the formulations were able to release the entire incorporated drug extremely rapidly (within 1 min) when they encountered a dissolution medium, whereas the commercially available product released only 13.4 % of its drug loading in the same time. By tailoring the distribution of functional ingredients in electrospun core-shell structures, new drug delivery systems which can both accelerate dissolution and also mask unpleasant tastes were produced. [ABSTRACT FROM AUTHOR]

The preparation of Janus fibers using a new side-by-side electrospinning process is reported. By manipulating the angle between the two ports of the spinneret emitting the working fluids, Janus nanofibers with tunable structures in terms of width, interfacial area and also volume of each side can be easily fabricated. [ABSTRACT FROM AUTHOR]

This manuscript reports a new type of drug-loaded core-shell nanofibers that provide tunable biphasic release of quercetin. The nanofibers were fabricated using a modified coaxial electrospinning process, in which a polyvinyl chloride (PVC)-coated concentric spinneret was employed. Poly (vinyl pyrrolidone) (PVP) and ethyl cellulose (EC) were used as the polymer matrices to form the shell and core parts of the nanofibers, respectively. Scanning and transmission electron microscopy demonstrated that the nanofibers had linear morphologies and core-shell structures. The quercetin was found to be present in the nanofibers in the amorphous physical status, on the basis of X-ray diffraction results. In vitro release profiles showed that the PVP shell very rapidly freed its drug cargo into the solution, while the EC core provided the succedent sustained release. Variation of the drug loading permitted the release profiles to be tuned. [ABSTRACT FROM AUTHOR]

Coaxial electrospraying was explored to organize polymer excipients in a core-shell manner for providing biphasic controlled release of active ingredient. With ferulic acid (FA) as a model drug, and shellac and polyvinylpyrrolidone (PVP) as the core and shell polymeric matrices, core-shell nanoparticles were successfully fabricated. A series of tests were carried out to characterize the prepared core-shell nanoparticles and also the nanoparticles prepared using a single fluid electrospraying of the shell or core fluids alone. The core-shell nanoparticles had an average diameter of 530 ± 80 nm with clear core-shell structure. The contained FA was converted to an amorphous state both in the core and the shell parts due to the favorable hydrogen bonding between the components. In vitro dissolution tests demonstrated that the core-shell nanoparticles were able to provide the desired biphasic drug-controlled release profiles. Coaxial electrospraying is a useful tool for the development of novel nanodrug delivery systems from polymers. [ABSTRACT FROM AUTHOR]

The influence of different types of solvents as sheath fluids on the quality of electrospun ethyl cellulose (EC) nanofibers is investigated in this paper by a modified coaxial process. With 24 w/v % EC in ethanol as electrospinning core fluid and pure solvents including methanol, ethanol and N,N-dimethyl formamide (DMF) as sheath fluids, EC nanofibers were generated by the modified processes. Field emission scanning electron microscope observations demonstrate that the modified process is effective in improving the nanofibers' quality in terms of nanofibers' diameters, distributions and structural uniformity. The key of the modified coaxial process is the reasonable selection of the sheath solvents that is suitable for the drawing process of core EC fluid during the electrpospinning. The EC nanofibers' diameters (D, nm) could be manipulated through the reasonable selection of the type of the sheath solvents based on their boiling point (T, °C) D = 841-3.71T (R=0.9753). This paper provides useful methods for the implementation of the modified coaxial process controllably to obtain polymer nanofibers with high quality. [ABSTRACT FROM AUTHOR]

Two drawbacks of the traditional electrospinning process when used for producing nanofibers for drug release are that clogging of the spinneret is often experienced, and the fibers produced often exhibit a tailing-off of drug release over sustained periods. The present study investigates the preparation of ferulic acid (FA) sustained-release cellulose acetate (CA) nanofibers, in which a third component, polyvinylpyrrolidone (PVP), was included into the nanocomposites for an improved sustained drug release profile. A modified coaxial electrospinning process, in which only organic solvent N, N-dimethylacetamide was used as a sheath fluid, was exploited for a smooth and continuous fabrication of multiple-component nanofibers. Under an applied voltage of 16 kV and an optimized sheath-to-core flow rate ratio of 0.11, three types of FA/PVP/CA composite nanofibers (with varied of PVP content) were generated. These nanofibers had higher quality in terms of size and distribution of nanofiber diameter, as indicated by FESEM images. Analysis of double- and triple-component nanofibers by XRD, DSC, and ATR-FTIR confirmed the compatibility of components producing homogenous fibers in both cases, but the triple-component nanofibers exhibited better release profiles over sustained periods than the double-component nanofibers in terms of release completeness, reduced tailing-off, and adjustable release rates. The modified coaxial process and the resulting multiple-component nanocomposites should provide a new way for developing novel drug sustained materials and drug delivery systems. [ABSTRACT FROM AUTHOR]