Search

Pseudoestrogene bisphenol A (BPA) can be important ingredient of thermochromic inks, increasingly used materials in thermal printing paper, security printing, advertising, design and as temperature indicators in medicine and food industry. BPA mass fraction in thermochromic inks can be up to several percent. Hence, disposal of items with thermochromic prints pose a risk of environmental pollution. In this work BPA mass fraction was monitored during anaerobic degradation of papers with thermochromic prints in soil in both matrices: papers and soil. The degradation conditions simulated deeper layers of waste at a landfill site. Six types of papers with prints of thermochromic ink containing 2% of BPA were subjected to anaerobic degradation over up to 150 days.

Purpose The most abundant among the separately collected waste materials in Italy is food waste. This research aims to evaluate the influence of the type of collection bag on the food waste management chain. In Italy, the food waste collection is mainly based on bioplastic bags. As an alternative, a new type of recycled paper bag shows potential advantages. Methods The two types of collection bag were compared evaluating the weight loss of food waste during the household storage, by means of an experimental assessment simulating the domestic dynamic bag filling. Moreover, the biomethane production of bags under anaerobic conditions was measured at the lab-scale level with Biochemical Methane Potential (BMP) tests. Results During the household storage, the breathable fabric of the paper allows for higher weight losses, ranging on average between + 29 and + 44% compared to bioplastic. BMP tests, carried out under different conditions (temperature, inoculum), showed a 2–14 times higher generation of methane by paper bags compared to bioplastic bags, when referred to 1 kg of inserted food waste. Conclusions Collecting the food waste inside paper bags shows advantages compared to the use of bioplastic bags. First, the waste collection is benefitted thanks to the lower weight of material to be transported to treatment plants, leading also to the possibility of decreasing the collection frequency. Moreover, paper resulted more compatible than bioplastic with the anaerobic digestion treatment, which is currently rapidly increasing as a food waste management option. Graphic Abstract

Aim of this research was to treat the organics enriched Paper and Pulp Industry (PPI) effluents using multi-metal tolerant predominant indigenous bacterial species. In addition, assessing the potential of treated bacterial biomass as a single cell protein (SCP). The multi-metal tolerant Streptomyces tuirus OS1 was enumerated from the Paper and Pulp Industry (PPI) effluents was identified through standard molecular characterization. S. tuirus OS1 proficiently ameliorated organic contaminants in PPI effluent in the in study at 35 °C, 45 °C, and 25 °C. Fortunately, the S. tuirus OS1 considerably increased the dissolved oxygen level in treated PPI effluent in 30 days of bioremediation process. Interestingly, at 35 °C of bioremediation process the S. tuirus OS1 demonstrated increased dried biomass (7.1 g L

The effective degradation of KL from paper mill effluent is an important for environmental safety. This research is primarily concerned with the identification of KL-degrading Bacillus cereus from activated sludge and their possible use for the degradation of Kraft lignin (KL). This strain was involved in the production of lignin peroxidase-LiP (3.20 U/mL), manganese peroxidase-MnP (20.36 U/mL), and laccase (21.35 U/mL) enzymes, which were responsible for high KL degradation (89%) and decolorization (40%) at 1000 mg/L KL in 3 days. The SEM-EDS, UV-Vis, FTIR, and GC-MS analysis were used to analyze the bacterial cell and KL interactions to trace the KL degradation process. The significant reduction of pollutants (KL-72.5%, color-62.0%, COD-45.05%) and reduction in toxicity (80%) of bacterial-treated effluent indicated that B. cereus has the potential to be used in the degradation of pollutants from paper mill effluents.

The present study aimed to enzymatic deinking of waste papers and to valorize the effluent for biobutanol production. Application of fungal enzymatic cocktail (cellulase, amylase, xylanase, pectinase, lipase, and ligninase) on office used paper, newspaper, and ballpen written paper leading to improvement in brightness (84.91, 72.51, 76.69 % ISO), InKd (82.89, 68.95, 76.49%), κ-number (12.9, 13.6, and 13.1), opacity (27.91, 30.07, and 2.85%), tensile strength (49.24, 45.31, and 46.98 Nm/g), respectively and indices were consistent with chemical treated pulps. The quality of effluent generated during enzymatic deinking in respect to BOD and COD level was eco-friendlier than the chemical process. The enzyme-treated effluent was employed as supporting substrate for butanol (18.4 g/l) production by Clostridium acetobutylicum ATCC824. Material balance and life cycle assessment of the whole processes were evaluated to validate its industrial and environmental relevance.

Lignin is a major by-product of pulp and paper industries, and is resistant to depolymerization due to its heterogeneous structure. Degradation of lignin can be achieved by the use of potential lignin-degrading bacteria. The current study was designed to evaluate the degradation efficiency of newly isolated Bacillus altitudinis SL7 from pulp and paper mill effluent. The degradation efficiency of B. altitudinis SL7 was determined by color reduction, lignin content, and ligninolytic activity from degradation medium supplemented with alkali lignin (3 g/L). B. altitudinis SL7 reduced color and lignin content by 26 and 44%, respectively, on the 5th day of incubation, as evident from the maximum laccase activity. Optimum degradation was observed at 40 °C and pH 8.0. FT-IR spectroscopy and GC-MS analysis confirmed lignin degradation by emergence of the new peaks and identification of low-molecular-weight compounds in treated samples. The identified compounds such as vanillin, 2-methyoxyhenol, 3-methyl phenol, oxalic acid and ferulic acid suggested the degradation of coniferyl and sinapyl groups of lignin. Degradation efficiency of B. altitudinis SL7 towards high lignin concentration under alkaline pH indicated the potential application of this isolate in biological treatment of the lignin-containing effluents. HIGHLIGHTS Bacillus altitudinis SL7 isolated from effluent could efficiently degrade lignin under alkaline conditions.; Degradation efficiency was determined by analyzing lignin content, color reduction, and ligninolytic enzyme activity.; Extracellular laccase from B. altitudinis SL7 can play a significant role in the depolymerization of lignin.; Various low-molecular-weight lignin degradation products were determined through GC-MS.

The objective of this research was to evaluate the distribution of the molecular weights of the recalcitrant organic matter contained in kraft mill effluents and identify microbial consortia responsible for an anaerobic biodegradable fraction. As a result, the average removal efficiencies of chemical organic demand (COD) and biological oxygen demand (BOD

Removing benzene from indoor space plays an important role in indoor air purification. A novel filter with vegetal fiber paper (VFP) as matrix hosting silica gel is proposed in this paper for benzene removal. In order to investigate the feasibility and performance of this idea, firstly, three pieces of VFP samples impregnated with different amounts of silica gel are fabricated and their benzene adsorption quantities are tested. The results show that three times is recommended as the optimal number for impregnating. The VFP sample impregnated with silica gel after the third impregnating exhibits commendable coating stability and good benzene adsorption performance. Additionally, at low relative pressure (Pb /Ps ≤ 0.05), the experimental data of benzene adsorption isotherms fit well with the Langmuir model with R2 greater than 0.97. Then, two actual filters made of VFP impregnated with silica gel after the third impregnating were fabricated. It is found that the pressure drop of the actual filter is only 1200 Pa/m when the air velocity is 2 m/s. Besides, the one-pass efficiency of the filter can reach to 19.44%. It is expected that the silica gel coated on the filter can be modified to improve the purification performance of the filter.

The amount of compostable bioplastics collected with the food waste is constantly growing, particularly due to the bags used for collection. According to the Italian legislation, compostable bioplastics must be accepted by all biological treatment plants, including aerobic and anaerobic facilities. Anyway, the compostability standard requires only the assessment of the aerobic degradability, while it is generally not required to test the behaviour under anaerobic conditions. This aspect is evaluated in the paper, where the anaerobic degradability of bioplastic bags used for the food waste collection is assessed. First, Biochemical Methane Potential (BMP) tests were performed on four commercial types of bioplastic bags, including those designed only for the collection of food waste and the shoppers, that can be reused for the same purpose. Subsequently, an innovative approach for this kind of substrate was applied, subjecting two bags to semi-continuous co-digestion tests together with the food waste. Both tests were performed by comparing the behaviour of bioplastic bags with that of an alternative collection paper bag. Finally, tests to evaluate the influence of physical phenomena on the degradation of bioplastics were performed to better understand the results of biological tests. BMP tests indicated a good degradability (71%) of bioplastic bags, while semi-continuous tests showed a much lower degradability (27%), confirmed by the observation of the undigested bag pieces. On the contrary, the paper bag presents interesting characteristics, because its degradability in the semi-continuous tests (82%) resulted even higher than that observed in the BMP tests (74%). These results highlight an important difference between the bags mono-digestion by means of BMP tests and the semi-continuous co-digestion tests with food waste, which better simulate the full-scale operational conditions.

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis.

The pulp and paper industry consumes a huge amount of water and releases more polluted and colored wastewater every year. Many conventional techniques are used in the treatment of paper industry wastewater. However, for color removal from paper mill effluent, there is no proven method so far, on an industrial scale. Due to high energy input and high cost, there is an urgent need to find out a new technique that must be sustainable, economical, and environment friendly. Various methods have been investigated on bench scale and pilot scale also but no proven method for color removal on an industrial scale. The paper provides an overview of the color removal techniques from different sources of pulp and paper mill wastewater discharged by various industries. The review described various components involved in various processes for color removal from paper mill waste water. The present works focus on processes like chemical, chemical/physical, biological, physicochemical, and electrochemical applied in color removal from paper mill wastewater. The present review gives key information on the effectiveness, use, betterment, and limitations of numerous methods of treatment targeted at color removal from paper mill wastewater using various techniques still under evolution.

As human beings have been consistently exposed to bisphenol A (BPA) and bisphenol S (BPS) derived from various products, the intake of BPS/BPA to humans has been extensively studied. However, using conventional biological matrices such as urine, blood, or dissected skin to detect BPS/BPA in the human body system requires longer exposure time to them, hardly defines the pollutant source of the accumulated BPS/BPA, and is often invasive. Herein, our new approach i.e. fingerprint analysis quantitatively confirms the transfer of BPS/BPA from receipts (specific pollution source) to human skin only within receipt-handling of “20 s”. When receipts (fingertip region size; ~1 cm2) containing 100–300 μg of BPS or BPA are handled, 20–40 μg fingerprint-1 of BPS or BPA is transferred to human skin (fingertip). This transferred amount of BPS/BPA can still be toxic according to the toxicity test using water fleas. As a visual evidence, a fingerprint map that matches the distribution of the absorbed BPS/BPA is developed using a mass spectrometry imaging tool. This is the first study to analyze fingerprints to determine the incorporation mechanism of emerging pollutants. This study provides an efficient and non-invasive environmental forensic tool to analyze amounts and sources of hazardous substances.

The article presents the research results of the oxidation of watered toxic waste from the pulp and paper industry (sludge-lignin, the empirical formula of organic matter CH1.51N0.05S0.03Cl0.01O0.54) in supercritical water-oxygen (SCW/O2) fluid. The experiments were carried out using a flow tube reactor at a pressure of 25 MPa, temperature gradient along its vertical axis (from top to bottom: 390–600 °C), sludge-lignin flow rate of 9.5–14.5 g/min, oxygen ratio OR = 0.73–2.52, using NaOH (1.6 wt%) as a catalyst. Employing gas chromatography – mass spectrometry, polychlorophenols were identified in the composition of sludge-lignin, in which 2,4,6-trichlorophenol was the main component. The total yield of extracted phenols and chlorophenols per sludge-lignin organic matter was 20.82 and 2.88 μg/g, respectively. It is revealed that the conversion rate of sludge-lignin in SCW/O2 fluid is limited by heterogeneous oxidation of the carbonized residue, and is determined by the O2 content in the reaction mixture. At OR ≥ 1.16, only CO2, CO, N2, and N2O were detected in the volatile oxidation products. An increase in OR from 0.73 to 2.52 leads to a decrease in the total content of phenols (from 45540.1 to 129.3 μg/dm3) and chlorophenols (from 51.4 to 2.2 μg/dm3) in the water collected at the reactor outlet. It is shown that 2,6-dichlorophenol and 2-chlorophenol are the most resistant to oxidation. From the analysis of the initial sludge-lignin and mineral residues, it follows that the bulk of the chlorine contained in its organic matter is converted into NaCl in the course of oxidation.

In this study, an internal circulation-anoxic/aerobic (IC-A/O) process followed by ultrafiltration (UF) and reverse osmosis (RO) system was applied for paper wastewater reclamation. The IC-AO system presented a stable and efficient performance, achieving high removal of chemical oxygen demand (COD), total organic carbon (TOC) and total nitrogen (TN) with methane production rate of 132.8 mL/d. Acute toxicity to Daphnia magna (D. magna) was reduced significantly (83.2%) and the spearman's rank correlation analysis indicated that the toxicity of effluents from each reactor were positively correlated with COD and TOC. Hexadecanoic acid, octadecanoic acid and benzophenone were the main toxic contributors for biological effluent. Microbial community revealed that Anaerolinea was significantly related with organic pollutants. The UF-RO system further removed pollutants and toxicity with the final effluent COD, TOC, ammonium nitrogen (NH4+-N) and TN of 32.6, 18.8, 0.3 and 9.2 mg/L, respectively, which proved that it was feasible for paper wastewater reuse. This study presented an efficient, practical and environmentally competitive system, and paved a foundation for the treatment and reuse of paper wastewater.

International audience; An experimental design was proposed to test the influence of three parameters on the performance of food waste (FW) dry anaerobic digestion (AD) coupled with aerobic pre-treatment: (1) the type of aerobic pre-treatment (no pre-treatment/dynamic aeration/static storage); (2) the composition of FW (paper/no paper) and (3) the frequency of leachate recirculation in the batch leach bed reactor (LBR) used as dry AD process. Performance of AD was assessed by measuring pH, VFA, biogas production and by modelling the kinetics of methane production using modified Gompertz equation. A statistical analysis of variance showed that AD leachate recirculation condition was the most impacting parameter on methane production. A high production of VFA was noticed (~ 25 gDCO·L '1 ) that did not lead to inhibition due to high buffer capacity of inoculum (5.2 gN-NH 4 + ·L '1 ). 80% of the biomethane potential was reached in the batch test with a daily leachate recirculation and with FW without paper. According to simulations, an experimental duration of 31'32 days showed to be optimal to reach 90% of degradation potential under these LBR conditions. A lower frequency of leachate recirculation or the addition of paper decreased methane production. The introduction of a two-day aeration step stabilized the production of VFA along the digestion process and enhanced the methane production on FW with paper. Conversely a two-day storage step induced a rapid acidification and a subsequent significant decrease of methane production rate. © 2019, Springer Nature B.V.

Despite the extensive use of the Internet, printed newspapers remain a primary information source. In this study, reading a newspaper in a relatively confined or poorly ventilated indoor space was simulated to determine the profile of particles released from the newspaper into the air. The consecutive simulated conditions were reading without agitation of the newspaper (NoAg), followed by reading with agitation of the newspaper (Ag) and post-reading absent the newspaper (PostR), repeated with four newspapers. We found that particle number concentration (ΣN) fell during Ag owing to electroadhesion of ultrafine particles (200 nm) caused by static charges created by friction between the paper surface and the air as a result of newspaper agitation. Conversely, particle surface area concentrations (ΣA) and particle volume concentrations (ΣV) increased significantly during Ag. This was because the larger, fine (1-2.5 μm) and coarse mode (2.5-10 μm), particles were detached from the newspaper during agitation due to inertial detachment - the release of even a small number of these particles contributing greatly to ΣA and ΣV. The critical particle number diameter (CPND) occurred at 207-310 nm. Particles smaller than this were subject to electroadhesion during Ag. The critical particle volume diameter (CPVD) occurred at 130-497 nm. Particles larger than this were subject to inertial detachment during Ag. These observations indicate that the electroadhesion of smaller particles and the inertial detachment of larger particles occur simultaneously. Particle mass concentrations were found to be as high as 168.7-534.3 μg m

Due to the presence of various organic contaminants, improper disposal of pulp-paper wastewater poses harm to the environment and human health. In this work, pulp-paper sludge (PPS) after secondary treatment were collected from M/s Century Pulp-paper Mills in India, the chemical nature of the organic pollutants was determined after solvent extraction. All the isolates were able to produce lipase (6.34–3.93 U ml− 1) which could account for the different fatty acids detected in the PPS. The dominant strains were in the classes of α and γ Proteobacteria followed by Firmicutes. The Shannon-Weiner diversity indexes for phylotype richness for the culturable and non-culturable bacterial community were 2.01 and 3.01, respectively, indicating the non- culturable bacterial strains has higher species richness and diversity compared to the culturable bacterial strains. However, the culturable strains had higher species evenness (0.94 vs 0.90). Results suggested only a few isolated strains were resistant to the POPs in the PPS, whereas non-cultural bacteria survived by entering viable but non-cultural state. The isolated strains (Brevundimonas diminuta, Aeromonas punctata, Enterobacter hormaechei, Citrobacter braakii, Bacillus pumilus and Brevundimonas terrae) are known for their multidrug resistance but their tolerance to POPs have not previously been reported and deserved further investigation. The findings of this research established the presence of POPs which influence the microbial population. Tertiary treatment is recommended prior to the safe disposal of pulp paper mill waste into the environment.

In this work, an eco-friendly solution for the remediation of wastewater generated in the lignin recovery process from eco-industrial paper mill has been proposed in their way towards a more circular economy strategy. Thus, the application of the electro-Fenton process for the degradation of the non-recovered lignin and other organic compounds form a scarcely studied acid black liquor waste (ABLW) was successfully performed. This treatment was able to operate in a range of COD loads (0.5–19.5 mg O2·L–1) showing high degradation values of the ABLW determined by the abatement of color, total phenolic content and COD. Then, the optimization of the working conditions for the design of a sustainable treatment system with optimum efficiency was carried out using a response surface methodology. The experiment carried out in the calculated optimal conditions for the electro-Fenton degradation process (current intensity 132.5 mA, catalyst dosage of 0.10 mM, and temperature 40 °C) showed a COD removal of 74.82% and current efficiency 77.79%, close to the theoretical value predicted by the model 73.12% and 77.06%, respectively. In addition, the identification of the final products permitted to confirm the mineralization efficiency.

Funding Information: The authors are grateful with Arauco Bioforest S.A. for giving the right to use the presented results. Publisher Copyright: © 2021 The Authors A pulsed electrodialysis reversal (pEDR) process is proposed to desalinate spent water after particle removal, biological and chemical coagulation, which are commonly used as a sequence in Kraft pulp mills. pEDR affords closed-loop processing, reducing the need for freshwater intake while maintaining the quality of recirculating process streams. Compared with conventional electrodialysis, pEDR minimizes production losses (from 5 % to 0.6 %), extending the time for hydraulic reversal (from 15 min to at least 2 h). Simultaneously, the conductivity of the effluent is significantly reduced, from 2100 to 200 μS/cm, reaching a quality similar to the feed water. The operation cost (0.38 US$/m3) is factored in the techno-economic viability of the process water recirculation, which is also demonstrated for its scalability. Additionally, WinGEMS simulation highlights the benefits of installing a pEDR unit, positively impacting mill water under different recirculation rates. Overall, we show remarkable gains in water economy, operation (maintenance and fouling), and quality, which are critical factors in achieving resource sufficiency.

Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications.

Generally, the mechanical strength and stiffness of old corrugated cardboard (OCC) waste paper are decreased after multiple recycling procedures. Surface sizing starch, which is extensively used in the surface sizing of paper making, accumulates after dissolving from the fibers and is transformed into pollutant during the OCC re-pulping process. To overcome the pollution and reutilization problem of the waste starch during the recycling process of OCC paper, waste starch was ionized using hydrogen peroxide (H2O2) to improve the mechanical properties of OCC paper during the reutilization. The results showed that the carboxyl group of waste starch increased with an increasing degree of ionization, resulting in enhanced copper ion adsorption capacity. Furthermore, the retention rate of the modified starch in the wet-end increased from 18.0% to 48.2%. The OCC paper presented the highest burst index and tensile strength of 8.94 kPa m2/g and 112.5 N m/g, respectively, when MS-2 was added. This work has great significance for implementation of the cleaning production of OCC waste papers and the reutilization of the waste starch.

A potential bacterium Bacillus flexus RMWW II has been isolated from rice mill effluent, and examined for its decolorizing potential for lignin-mimicking dyes. The biodegradation of alkali lignin by the rod-shaped, Gram-positive, oxidase and catalase-positive Bacillus flexus RMWW II bacteria is due to its uptake of lignin as the sole carbon source. The lignin degradation was 100% at a lignin concentration of 50 mg L−1 but the degradation reduced to 20% at 400 mg L−1. The bacterial-mediated biodegradation of alkali lignin was suitably explained by the Edward kinetics model with a maximal specific biodegradation rate (qmax) of 0.056 h−1 and true specific biodegradation rate (q*) of 0.042 h−1. The non-toxic nature of the metabolites of alkali lignin after bacterial degradation was illustrated by phytotoxicity studies. This bacterium was utilized to treat complex rice mill wastewater, as lignin is one of the major components of the effluent. A considerable reduction of 84% of chemical oxygen demand (COD) was observed in a batch reactor in 70 h of operation. The bacterial treatment results for the actual rice mill effluent indicate that Bacillus flexus RMWW II could be a promising agent for microbial remediation of lignin-laden raw rice mill wastewater.

This study presents 5-hydroxymethylfurfural removal from waste hand paper hydrolysate using activated carbon adsorption. In this context, the effects of adsorbent dosage, initial 5-hydroxymethylfurfural concentration, temperature, and agitation speed on 5-hydroxymethylfurfural adsorption were investigated. Moreover, isotherm and kinetic evaluations were performed using Langmuir, Freundlich, and Temkin models. The experimental data were correlated with zero, first, pseudo-first, and Weber–Morris intraparticle diffusion models. The toxicity of 5-hydroxymethylfurfural was determined using the resazurin reduction assay, and the EC50 of 5-hydroxymethylfurfural in the hydrolysate was found as 192 mg/L. Most convenient 5-hydroxymethylfurfural adsorption was obtained at 5 g/L AC dosage, 40 °C and 150 rpm agitation speed. The highest 5-hydroxymethylfurfural removal efficiency was 92% at 7 g/L AC dosage. The adsorption data fitted best with the Langmuir isotherm model with a maximum uptake capacity of 70.92 mg/g (R2: 0.96). The zero-order reaction kinetic model was the most suitable one among the others inspected. It was determined that intraparticle diffusion was not the rate-limiting step. This study showed that waste hand paper hydrolysate can effectively be detoxified by activated carbon adsorption. © 2019, Islamic Azad University (IAU).

A novel adsorbent, the uniform fiber ball (UFB) loaded with polypyrrole (UFB-PPy), was synthesized for Cr(VI) removal from water in this paper. The structure of the UFB and UFB-PPy were characterized by SEM, EDS, FT-IR, BET, XPS and TG. The adsorption properties of UFB-PPy towards Cr(VI) were investigated by the effects of temperature, initial concentration of Cr(VI), interfering ions and contact time in batch experiments, the isothermal models (Langmuir, Freundlich and Temkin) and the kinetic models (Pseudo first-order kinetic, Pseudo second-order kinetic and Intra-particle diffusion models) were used to describe the adsorption behavior. The effects of the initial concentration and flow rate of the Cr(VI) solution in the column experiments were also studied, and the dynamic models (Yoon-Nelson, Adams-Bohart and Wolborska model) were applied to predict the adsorption performance. The Cr(VI) removal mechanism of UFB-PPy was revealed by studying the effect of pH on adsorption, testing of Cl−, and analyzing the XPS. The results showed that UFB-PPy exhibited excellent adsorption properties for Cr(VI) both in batch and column adsorption. The possible adsorption mechanism involved electrostatic attraction, ion exchange and reduction. Conveniently, the chromium resources can be recovered with the form of high-purity Cr2O3 by simple calcination of Cr(VI)-captured UFB-PPy (UFB-PPy-Cr).

Chemical oxygen demand (COD), an important indicative measure of the amount of oxidizable pollutants in wastewater, is often analyzed off-line due to the expensive sensor required for on-line analysis. However, its off-line analysis is time-consuming. An on-line COD estimation method was developed with photoelectrocatalytic (PEC) technology. Based on the on-line data of the oxidation–reduction potential (ORP), dissolved oxygen (DO) and pH of wastewater, four different artificial neural network methods were applied to develop working models for COD estimation. Six different batches of sequence batch reactor (SBR) effluent from a paper mill were treated with PEC oxidation for 90 minutes, and 546 data points were collected from the on-line measurements of ORP, DO and pH, and the off-line COD analysis. After having training and validation with 75% and 25% of data, and evaluation with four statistical criteria (R2, RMSE, MAE and MAPE), the estimation results indicated that the developed radial basis neural network (RBNN) model demonstrated the highest precision. Subsequently, the application of the RBNN model to a new batch of SBR effluent from the paper mill revealed that the RBNN model was acceptable for COD estimation during the PEC advanced treatment process of papermaking wastewater, which implied its possible application in the future.

Fly ash (FA) from biomass combustion and biological sludge (S), both wastes from the pulp and paper industry, were granulated in different proportions (90% FA + 10% S, and 70% FA + 30% S w/w, dry weight basis, dw) and used to recover the functionality of soils affected by mining activities (Aljustrel, Iberian Pyrite Belt), with and without the application of municipal solid waste compost (MSWC). Application doses of both mixtures were 2.5, 5.0 and 10% (w/w, dw). These materials corrected soil acidity to circumneutral values and increased extractable P and K concentrations. A significant increase in soil organic matter (from 0.6 to 0.8–1.5% w/w, dw) and N content (from 0.04 to 0.09–0.12% w/w, dw) was also observed, but only when MSWC was applied. The soil was already heavily contaminated with Cu, Pb and Zn and the application of amendments did not increase their pseudo-total concentrations. The CaCl2 extractable fractions of both Cu and Zn decreased to very low values. The improvement in soil quality, compared to fertilizer only treatment, was further evidenced by the increase in some soil enzymatic activities (dehydrogenase, β-glucosidase and cellulase), with a better response for the granules with the higher proportion of biological sludge, as well as by the decrease in the soil-water extract toxicity towards different organisms (Daphnia magna, Thamnocephalus platyurus, and Pseudokirchneriella subcapitata). Agrostis tenuis germinated and grew during the first month only in the amended pots, but, after that, a considerable phytotoxic effect was evident. This was mainly attributed to salt stress or to some specific ionic toxicity. In conclusion, to establish a long-term plant cover in mining soils amended with biomass ash-based materials, the selection of plants with higher resistance to salinity and/or the stabilization of the amendments, to reduce their soluble salt content, is recommended.

The effects of Mn(II) on Fenton system to treat papermaking wastewater and the mechanism of Mn(II) enhanced Fenton reaction were investigated in this study. The chemical oxygen demand (COD) removal efficiency was enhanced in the presence of Mn(II), which increased by 19% compared with that of the Fenton system alone. The pseudo-first order reaction kinetic rate constant of Mn(II)/Fenton system was 2.11 times higher than that of Fenton system. 67%–81% COD were removed with the increasing Mn(II) concentration from 0 to 0.8 g/L. COD removal efficiency was also enhanced in a wider pH range (3–7), which indicated the operation parameters of Fenton technology could be broadened to a milder condition. The study of the mechanism showed that Mn(II) participated in the oxidation and coagulation stages in Fenton system. In the oxidation stage, Mn(II) promotes the production of HO2•/ O2•−, then HO2•/ O2•− reacts with Fe(III) to accelerate the formation of Fe(II), and finally accelerates the production of HO•. Meantime MnMnO3 and Fe(OH)3 forms in the coagulation stage, facilitating the removal of suspended substances and a large amount of COD, which enhances the overall COD removal of papermaking wastewater. This study provided a detailed mechanism to improve practical applications of Fenton technology.

Since the 1980s, the pulp and paper industry in Finland has resulted in the accumulation of fibres in lake sediments. One such site in Lake Näsijärvi contains approximately 1.5 million m3 sedimented fibres. In this study, the methane production potential of the sedimented fibres (on average 13% total solids (TS)) was determined in batch assays. Furthermore, the methane production from solid (on average 20% TS) and liquid fractions of sedimented fibres after solid-liquid separation was studied. The sedimented fibres resulted in fast methane production and high methane yields of 250 ± 80 L CH4/kg volatile solids (VS). The main part (ca. 90%) of the methane potential was obtained from the solid fraction of the sedimented fibres. In addition, the VS removal from the total and solid sedimented fibres was high, 61–65% and 63–78%, respectively. The liquid fraction also contained a large amount of organics (on average 8.8 g COD/L), treatment of which also has to be considered. The estimations of the methane production potentials in the case area showed potential up to 40 million m3 of methane from sedimented fibres. acceptedVersion

Sewage sludge/biosolids are by-wastes of municipal and industrial wastewater treatment. As sources of nutrients (C, N, P) they are widely used in intensive farming where large supplementation of organic matter to maintain fertility and enhance crop yields is needed. However, according to the report of European Commission published in 2010, only 39% of produced sewage sludge is recycled into agriculture in the European Union. This situation occurs mainly due to the fact, that the sewage sludge may contain a dangerous volume of different contaminants. For over decades, a great deal of attention has been focused on total concentration of few heavy metals and pathogenic bacteria Salmonella and Escherichia coli. The Sewage Sludge Directive (86/278/EEC) regulates the allowable limits of Zn, Cu, Ni, Pb, Cd, Cr and Hg and pathogens and allows for recovery of sludge on land under defined sanitary and environmentally sound conditions. In this paper, a review on quality of sewage sludge based on the publications after 2010 has been presented. Nowadays there are several papers focusing on new serious threats to human health and ecosystem occurring in sewage sludge – both chemicals (such as toxic trace elements – Se, Ag, Ti; nanoparticles; polyaromatic hydrocarbons; polychlorinated biphenyl; perfluorinated surfactants, polycyclic musks, siloxanes, pesticides, phenols, sweeteners, personal care products, pharmaceuticals, benzotriazoles) and biological traits (Legionella, Yersinia, Escherichia coli O157:H7)., Highlights • Sewage sludge contains organic and inorganic contaminants not regulated by law. • Total content of many compounds (heavy metals) is not a reliable indicator of toxicity. • Regular monitoring is crucial to limit a release of toxic substances to ecosystem.

Bisphenol A (BPA) was commonly used as color developer for thermal paper such as cash register receipts, labels or tickets. Therefore, thermal paper was considered by the European Food Safety Authority (EFSA) as the main source of human exposure to BPA beside epoxy based food contact materials. In this study, a German market analysis on the use of BPA and alternative color developers in thermal paper receipts is provided for the years 2015, 2016 and 2017.114 (2015), 98 (2016) and 99 (2017) samples were randomly collected and analyzed by HPLC-DAD. In summary, BPA was still the most frequently found color developer (48.2% in 2015, 46.9% in 2016 and 52.5% in 2017). The most commonly used alternative was the phenol-free substance Pergafast® 201 (34.2%, 33.7%, 40.4%). The bisphenol analogs bisphenol S (BPS; 11.4%, 9.2%, 6.1%) and D8 (6.1%, 7.1%, 1.0%) were less common. Another phenol-free substituent, a urea urethane compound (UU), was also detected (3.1% in 2016). Concentrations of color developers in thermal paper ranged from 1.4 to 32.4 mg/g (median values between 2.5 and 15.9 mg/g). Concentrations of BPA were found to be highest followed by BPS, UU, Pergafast® 201 and D8. In addition, two pharmacologically active substances, dapsone (6.0 mg/g) and tolbutamide (5.5 mg/g), were detected in a non-marketed thermal paper, that was supposed to use ascorbic acid as initial color developer. Different release experiments of the detected color developers were performed. Sensitizers 1,2-diphenoxy-ethane, 1-phenylmethoxy-naphthalene and diphenylsulfone, used frequently in the thermal paper processes, were quantified.

Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13–0.8 ng TEQ kg −1 , and 0.15–1.9 pg TEQ L −1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t −1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ.

This study deals with chemical oxygen demand (COD), phenol and Ca +2 removal from paper mill industry wastewater by electrocoagulation (EC) and electro-Fenton (EF) processes. A response surface methodology (RSM) approach was employed to evaluate the effects and interactions of the process variables and to optimize the performance of both processes. Significant quadratic polynomial models were obtained (R 2 = 0.959, R 2 = 0.993 and R 2 = 0.969 for COD, phenol and Ca +2 removal, respectively, for EC and R 2 = 0.936, R 2 = 0.934 and R 2 = 0.890 for COD, phenol and Ca +2 removal, respectively). Numerical optimization based on desirability function was employed; in a 27.55 min trial, 34.7% of COD removal was achieved at pH 9 and current density 96 mA/cm 2 for EC, whereas in a 30 min trial, 74.31% of COD removal was achieved at pH 2 and current density 96 mA/cm 2 and H 2 O 2 /COD molar ratio 2.0 for EF. The operating costs were calculated to be 6.44 €/m 3 for EC and 7.02 €/m 3 for EF depending on energy and electrode consumption at optimum conditions. The results indicate that the RSM is suitable for the design and optimization of both of the processes. However, EF process was a more effective technology for paper mill industry wastewater treatment as compared with EC.

Hydrophilic inks have been widely used due to higher printing speed, competitive cost and being healthy non-organic solvents. However, they cause problems in both product quality and process runnability due to their hydrophilic surface wettability, strong negative surface charge and sub-micron size. Electric treatment was shown to be able to increase the ink sizes from 60 nm to 700 nm through electrocoagulation and electrophoresis. In addition, electric treatment assisted flotation could reduce effective residual ink concentration (ERIC) by 90 ppm, compared with only 20 ppm by traditional flotation. Furthermore, the effect of electric treatment alone on ink separation was investigated by two anode materials, graphite and stainless steel. Both of them could remove hydrophilic inks with less than 1% yield loss via electroflotation and electrophoresis. But graphite is a better material as the anode because graphite reduced ERIC by an additional 100 ppm. The yield loss of flotation following electric treatment was also lower by 17% if graphite was the anode material. The difference between the two electrode materials resulted from electrocoagulation and ink redeposition during electric treatment. An electric pretreatment-flotation-hyperwashing process was conducted to understand the deinking performance in conditions similar to a paper mill, and the ERIC was reduced from 950 ppm to less than 400 ppm.

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g−1. The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d−1. BPA has been also detected in recycled paper with concentrations up to 46 μg g−1. Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure.

One-time ultrasonication pre-treatment of Rhodobacter sphaeroides was evaluated for improving biohydrogen production via photofermentation. Batch experiments were performed by varying ultrasonication amplitude (15, 30, and 45%) and duration (5, 10, and 15 min) using combined effluents from palm oil as well as pulp and paper mill as a single substrate. Experimental data showed that ultrasonication at amplitude 30% for 10 min (256.33 J/mL) achieved the highest biohydrogen yield of 9.982 mL H2/mLmedium with 5.125% of light efficiency. A maximum CODtotal removal of 44.7% was also obtained. However, when higher ultrasonication energy inputs (>256.33 J/mL) were transmitted to the cells, biohydrogen production did not improve further. In fact, 20.6% decrease of biohydrogen yield (as compared to the highest biohydrogen yield) was observed using the most intense ultrasonicated inoculum (472.59 J/mL). Field emission scanning electron microscope images revealed the occurrence of cell damages and biomass losses if ultrasonication at 472.59 J/mL was used. The present results suggested that moderate ultrasonication pre-treatment was an effective technique to improve biohydrogen production performances of R. sphaeroides.

This paper reviews key advances in understanding the hydrodynamics of the forming section of papermaking during the years 1950 to 2000. Over this period papermaking advanced from rather slow-speed Fourdrinier machines to modern high-speed twin-wire formers. The advances are described in the context of technical problems faced at the time to increase machine speeds and improve paper properties. The scientific work and advances in machine design contributed greatly to the marvel of modern papermaking, which now includes machines 10 m wide operating at speeds over 100 km/h.

Paper mill effluents are complex mixtures containing different toxic compounds including endocrine-disrupting (EDCs) and genotoxic compounds. In the present study non-concentrated raw and biologically treated wastewaters from two paper mill plants with different paper production technologies i) Paper mill A uses virgin fibres, and ii) Paper mill B uses recycled fibres for paper production and the corresponding receiving surface waters, were assessed for their cytotoxic/genotoxic activity with SOS/umuC, Ames MPF 98/100 Aqua, and comet assay with human hepatoma HepG2 cells. In addition the levels of seven selected EDCs were quantified in wastewater samples and receiving surface waters. All investigated EDCs were confirmed in raw and biologically treated effluents from both paper mills with concentrations being markedly higher in Paper mill B effluents. In the receiving surface waters three of the studied EDCs were determined downstream of both paper mills effluent discharge. The wastewater samples and the recipient surface water samples from Paper mill A were not mutagenic for bacteria and did not induce DNA damage in HepG2 cells. On the contrary, half of the raw wastewater samples from Paper mill B were mutagenic whereas biologically treated wastewater and the recipient surface water samples were negative. In HepG2 cells most of the raw and biologically treated wastewater samples from Paper mill B as well as surface water samples collected downstream of Paper mill B effluent discharge induced DNA damage. The results confirmed that genotoxic contaminants were present only in wastewaters from Paper mill B that uses recycled fibres for paper production, and that the combined aerobic and anaerobic wastewater treatment procedure efficiently reduced contaminants that are bacterial mutagens, but not those that induce DNA damage in HepG2 cells. This study highlights that in addition to chemical analyses bioassays are needed for a comprehensive toxicological evaluation of complex wastewater samples.

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03-35.72 and 6.03-31.35 ng/m3, respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64-0.90 and 1.50-2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1-4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63-81% of TAM, while the oxidized mercury accounted for 19-37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m3, or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m3, or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure.

This paper demonstrates the power of material flow analysis (MFA) for designing waste management (WM) systems and for supporting decisions with regards to given environmental and resource goals. Based on a comprehensive case study of a nationwide WM-system, advantages and drawbacks of a mass balance approach are discussed. Using the software STAN, a material flow system comprising all relevant inputs, stocks and outputs of wastes, products, residues, and emissions is established and quantified. Material balances on the level of goods and selected substances (C, Cd, Cr, Cu, Fe, Hg, N, Ni, P, Pb, Zn) are developed to characterize this WM-system. The MFA results serve well as a base for further assessments. Based on given goals, stakeholders engaged in this study selected the following seven criteria for evaluating their WM-system: (i) waste input into the system, (ii) export of waste (iii) gaseous emissions from waste treatment plants, (iv) long-term gaseous and liquid emissions from landfills, (v) waste being recycled, (vi) waste for energy recovery, (vii) total waste landfilled. By scenario analysis, strengths and weaknesses of different measures were identified. The results reveal the benefits of a mass balance approach due to redundancy, data consistency, and transparency for optimization, design, and decision making in WM.

The efficiency of combining iron sulfate and organic amendments (paper mill sludge, olive mill waste compost and olive tree pruning biochar) for the remediation of an As- and Cu-contaminated soil was evaluated. Changes in As and Cu fractionation and solubility due to the application of the amendments was explored by leachate analysis, single and sequential extractions. Also, the effects on Arrhenatherum elatius growth, germination of Lactuca sativa and toxicity to the bacteria Vibrio fischeri were assessed. The combination of iron sulfate and the organic amendments efficiently reduced As solubility and availability through the formation of amorphous iron oxides, while organic matter did not seem to mobilize As. At the same time, copper fractionation was strongly affected by soil pH and organic matter addition. The soil pH significantly influenced both As and Cu mobility. Within all the amendments tested, FeSO4 in combination with compost showed to be the most suitable treatment for the overall remediation process, as it reduced As and Cu availability andenhanced soil nutrient concentrations and plant growth. In sipte of contradictory trends between chemical analyses and ecotoxicity tests, we can still conclude that the application of organic amendments in combination with reactive iron salts is a suitable approach for the remediation of soils contaminated by Cu and As.

Knowledge about the total waste generated by the production of consumer goods can help raise awareness among policy-makers, producers and consumers of the benefits of closing loops in a future circular economy, avoiding unnecessary production and production steps and associated generation of large amounts of waste. In strict life cycle assessment practice, information on waste outputs from intermediate industrial processes of material and energy transformation is translated into and declared as potential environmental impacts, which are often not reported in the final results. In this study, a procedure to extract available intermediate data and perform a systematic pre-consumer waste footprint analysis was developed. The pre-consumer waste footprint concept was tested to analyse 10 generic products, which provided some novel and interesting results for the different product categories and identified a number of challenges that need to be resolved in development of the waste footprint concept. These challenges include standardised data declaration on waste in life cycle assessment, with a separation into waste categories illustrating the implicit environmental and scale of significance of waste types and quantities (e.g. hazardous waste, inert waste, waste for recycling/incineration) and establishment of a common definition of waste throughout sectors and nations.

Thoron (Rn) exhalation from building materials has become increasingly recognized as a potential source for radiation exposure in dwellings. However, few studies have focused on mitigation strategies to reduce exposure from thoron and its progeny. Therefore, the purpose of this study is to (1) determine the reduction in thoron exhalation from building materials applied with regularly available surface barriers and (2) investigate the effects from surface roughness of the base material, barrier thickness, and surface cover on the thoron-retaining action of the surface barrier. The findings from this study demonstrate that regular surface barriers provide a potentially significant reduction in thoron exhalation, which can reach more than 90%. Despite this reduction, there are also materials that provide no reduction at all. Based on this work, no commonly available product property could be identified that provides good guidance on the barriers' performance to reduce thoron exhalation.

Paper machine white water is generally characterized as a high concentration of suspended solids and organic matters. A combined physicochemical-biological and filtration process was used in the study for removing pollutants in the wastewater. The removal efficiency of the pollutant in physicochemical and biological process was evaluated, respectively. Furthermore, advanced technology was used to analyse the water quality before and after the process treatment. Experimental results showed that the removal efficiency of suspend solids (SS) of the system was above 99%, while the physicochemical treatment in the forepart of the system had achieved about 97%. The removal efficiency of chemical oxygen demand (COD) and colour had the similar trend after physicochemical treatment and were corresponding to the proportion of suspended and the near-colloidal organic matter in the wastewater. After biological treatment, the removal efficiency of COD and colour achieved were about 97% and 90%, respectively. Furthermore, molecular weight (MW) distribution analysis showed that after treatment low MW molecules (5 kDa) increased. Three-dimensional excitation-emission matrix fluorescence analysis showed that most humic-like substances were effectively removed during the treatment. The analyses of gas chromatography/mass spectrometry showed that the composition of organic matter in the wastewater was not complicated. Methylsiloxanes were the typical organic components in the raw wastewater and most of them were removed after treatment.

This paper presents the development and evaluation of three fuzzy neural network (FNN) models for a full-scale anaerobic digestion system treating paper-mill wastewater. The aim was the investigation of feasibility of the approach-based control system for the prediction of effluent quality and biogas production from an internal circulation (IC) anaerobic reactor system. To improve FNN performance, fuzzy subtractive clustering was used to identify model's architecture and optimize fuzzy rule, and a total of 5 rules were extracted in the IF-THEN format. Findings of this study clearly indicated that, compared to NN models, FNN models had smaller RMSE and MAPE as well as bigger R for the testing datasets than NN models. The proposed FNN model produced smaller deviations and exhibited a superior predictive performance on forecasting of both effluent quality and biogas (methane) production rates with satisfactory determination coefficients greater than 0.90. From the results, it was concluded that FNN modeling could be applied in IC anaerobic reactor for predicting the biodegradation and biogas production using paper-mill wastewater.

Lime mud is a kind of solid waste in the papermaking industry, which has been a source of serious environmental pollution. Ceramsites containing anorthite and gehlenite were prepared from lime mud and fly ash through the solid state reaction method at 1050°C. The objective of this study was to explore the efficiency of Ca 2 + and OH − release and assess the phosphorus and copper ion removal performance of the ceramsites via batch experiments, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Ca 2 + and OH − were released from the ceramsites due to the dissolution of anorthite, gehlenite and available lime. It is also concluded that gehlenite had stronger capacity for Ca 2 + and OH − release compared with anorthite. The Ca 2 + release could be fit well by the Avrami kinetic model. Increases of porosity, dosage and temperature were associated with increases in the concentrations of Ca 2 + and OH − released. Under different conditions, the ceramsites could maintain aqueous solutions in alkaline conditions (pH = 9.3–10.9) and the release of Ca 2 + was not affected. The removal rates of phosphorus and copper ions were as high as 96.88% and 96.81%, respectively. The final pH values of both phosphorus and copper ions solutions changed slightly. The reuse of lime mud in the form of ceramsites is an effective strategy.

The spherical cellulose nanocrystals (CNCs) with high purity were prepared, the processes included composite enzymolysis of pulp fibers and the purification of product. The impurities in the crude product CNCs were analyzed with FTIR, coomassie brilliant blue-G250 and ionic chromatography. The pure CNCs were characterized with SEM, XRD, DLS and TGA. The results indicated that the crude CNCs was flocculated and washed twice with a dilute acid solution (pH = 2) to get pure spherical CNCs, the purity was approximate 99.99%. The obtained pure spherical CNCs had a narrow particle size distribution with diameter 15–40 nm. FTIR and XRD analyses proved that the crystal phase of the spherical CNCs did not change, but the crystallinity decreased slightly compared with pulp fibers. The thermal degradation showed that the spherical CNCs had better thermal stability than one from other methods, and the temperature of maximum weight loss rate (Tmax) was 329.2 °C.

The potential growth of buffalo grass (Stenotaphrum secundatum) and couch grass (Cynodon dactylon) on artificial floating islands (AFIs) and their ability to remove total nitrogen (TN) and total phosphorus (TP) from a simulated paper mill wastewater was studied. This was done to assess the potential of AFIs for removal of nutrients from aerated stabilization basins (ASBs) that had occasional growth of blue-green algae (BGA) to bloom levels. Small scale AFIs were prepared using polyethylene foam and planted with the grasses in 30 L of tested water. Trials were conducted in a plastic covered greenhouse over a three-month period where temperatures ranged from 15 to 44 °C. The results showed that both buffalo and couch grasses can adapt to planting in AFIs showing increases of 125% and 148% in wet weight, respectively. Nutrient uptake by buffalo grass and couch grass were found to be similar. Percentage uptakes of TP and TN from the synthetic water by the buffalo grass were 82% and 47%, whereas by couch grass, uptakes were 83% and 45%, respectively.