Search

Atmospheric pressure surface discharge is shown to have great prospects for a number of industrial applications. To acquire better results in application fields and considering that the study of the basic parameters including electron temperature and electron density is desirable, we develop an equivalent circuit model and the diagnostic techniques based on optical emission spectroscopy and electrical measurement in our laboratory. The electron temperature has been determined to be about 0.7 eV by a Fermi–Dirac model. The electron density has been calculated to be near 1010cm−3 from a time resolved electrical measurement (Ohmic heating method).

Silicon oxide films were deposited in electron cyclotron resonance-radio frequency dual hybrid plasmas using a mixture of HMDSO and oxygen as source gases, and optical emission spectroscopy was employed to investigate the gas phase species in the plasma. It is found that both the deposition rate and the chemical bonds of films are significantly affected by the radio frequency bias. The deposition rate is slightly increased when a low direct current self-bias is applied, and is reduced with the increasing self-bias due to strengthened ion bombardment. The ratios of O to Si in the films deposited under the bias frequency of 400 kHz are above 2∶1, nearly the same as that under 13.56 MHz. However, the content of carbon under 400 kHz bias is much higher than that under 13.56 MHz. The reason is that the application of the high frequency bias of 13.56 MHz not only strengthens ion bombardment on the material surface, but also induces the variations of the bulk plasmas including the increase of O atom density, while the main effect of the bias of 400 kHz is only to strengthen ion bombardment.

A knotted polymer chain passing through a pore is investigated by molecule dynamics method. In this paper, we take 31 knot as an example. It is found that, during the process of translocation, the size of the knot fluctuates until the knot is unknotted. In addition, the effect of the knot on the translocation velocity of the knotted chain is also discussed. For the given external force, the average translocation time τ satisfies the scaling relation:τ～N α, and the scaling exponent α increases with the external force f. For short knotted polymer chains, the average translocation time τ decreases when the external force f increases. However, for very long knotted polymer chains, the average translocation time τ increases when the external force f increases. In the meantime, the position of knot in a knotted polymer chain also affects the average translocation time τ strongly. The closer the knot approaches the first translocated monomer, the longer the average translocation time. This investigation can provide some insights into the translocation of knotted polymer chains (especially knotted DNA) through the nanopore, and help us understand the translocation behavior of biomacromolecules.

The hot filament assisted double-bias hydrogen has been employed for the surface fabrication of the as-formed chemical vapor deposited diamond films on the nanometer scale. Diamond cone arrays are successfully prepared through hydrogen plasma etching. The intrinsic columnar structure of the diamond films leads to the unevenly distributed ion etching rate, which plays an important role in the cone formation. Simultaneously, the carbon-containing species sputtered out may re-deposit on the surface. The evolvement of the characteristic surface is thus determined by the competition between the ion etching and the carbon deposition. The application of grid electrode influences the discharge characteristics at the substrate region. By controlling the grid current, the surface structure of diamond films may be significantly tuned. Moreover, by introducing small amounts of methane in the etching process, the increased concentration of carbon-containing species enhances the secondary diamond nucleation on the film surface, which further promotes the uniformity of the diamond cone arrays.