Search

Assessments of greenhouse gas (GHG) emissions in managed areas are facing various challenges. A non-flow-through, non-steady-state (NFT-NSS) chamber coupled to a frame permanently inserted into the landfilled substrates is a standard method for quantifying GHG emissions in managed areas, such as pulp and paper mill sludge (PPMS) landfill sites. Frequent measurements are needed to minimize uncertainties on GHG emission factors at the landfill site scale. However, maintaining a frame inserted into the substrates for a long time period is often impossible due to landfilling management operations. Therefore, GHG measurements using NFT-NSS chambers placed directly on substrates' surface could be an interesting option. Our objectives were to determine the relationships between CO 2 , CH 4 , and N 2 O fluxes measured with (F + ) and without (F-) a frame inserted in the substrates' surface and to develop correction factors for fluxes measured without a frame. Measurements were made at different PPMS landfill sites in the province of Québec, Canada. Stronger GHG flux relationships were observed at the provincial (across sites) than the specific site scale: the variance in GHG fluxes from F- chambers explained up to 80 % of variance in fluxes from F + chambers. The measured CO 2 , CH 4 , and N 2 O fluxes in F- chambers were on average 53, 78, and 63 % lower, respectively, than those estimated by the models at provincial scale. The correction factors developed with this approach could greatly extend the number of sites where in situ GHG measurements can be done and would help refining GHG inventories at the provincial and national levels., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The pulp and paper industry is an important contributor to global greenhouse gas emissions 1,2 . Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries 3,4 . Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019-about 3.2% of global anthropogenic greenhouse gas emissions from the same period 5 -and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)

Waste paper disposed in landfills notably contributes to greenhouse gas (GHG) emissions and impedes more sustainable, circular alternatives, such as recycling. In Hong Kong, this unsustainable approach is currently dominant as 68% of waste paper products are treated in landfills in 2020. To contextualize the impact of local waste paper management and explore mitigation potentials of circular alternatives, this paper develops a quantitative assessment framework around GHG emissions development trajectories. Combining guidelines of the Intergovernmental Panel on Climate Change (IPCC), national GHG inventories, and local parameters from life cycle analysis, five GHG emissions projections were simulated along the Shared Socioeconomic Pathways (SSPs) until 2060. Most recent baselines indicate that Hong Kong's current waste paper treatment generated 638,360 tons CO 2 -eq in 2020, comprising 1,821,040 tons CO 2 -eq from landfill and 671,320 tons CO 2 -eq from recycling, and -1,854,000 tons CO 2 -eq from primary material replacement. Proceeding along a Business-as-Usual scenario under SSP5, GHG emissions will dramatically increase to a net 1,072,270 tons CO 2 -eq by 2060, whereas a recycling-intensive scenario will lead to a net saving of -4,323,190 tons CO 2 -eq. To complement the quantitative evidence on the benefits of waste paper recycling, field research was conducted to explore the feasibility of circular policy innovation from the perspective of recycling stakeholders. These empirical qualitative and quantitative findings from stakeholders' business routines and material transactions provide crucial indications for policy and institutional innovation: Essentially, for Hong Kong to improve waste paper recycling capacities and facilitate a circular economy (CE), local stakeholders require support via fiscal policy measures (financial subsidies or tax reductions) and infrastructure improvements (delivery access and material storage). In sum, this study employs a novel analytical framework combining original qualitative and quantitative evidence to provide policy innovation towards circular, GHG emission-saving waste paper management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The landfilling of paper mill sludge (PMS) has been restricted or even banned in many countries due to the raised concern about greenhouse gas (GHG) emissions and contamination of the soil and water, calling for a sustainable PMS management approach. The potential valorization of PMS to nanomaterials combined with traditional biorefinery was examined in this work. Three types of PMS-derived cellulose nanofibrils (CNFs) were prepared and evaluated: enzymatically assisted CNF (AU: with in-house produced enzyme and CT: with commercial enzyme), mechanically pretreated CNF (BT), and chemically pretreated CNF by TEMPO oxidation (TEMPO). It was found that enzyme-assisted mechanical fibrillation-derived CNFs had a comparable average diameter (27.9 nm for AU and 22.7 nm for CT) with that produced from mechanical pretreatment (26.5 nm for BT) and TEMPO oxidation pretreatment (20.0 nm for TEMPO), and they showed the best drainage properties among the three types of CNF. The CNFs resulting from enzymatic pretreatment reduced 15% of energy consumption compared to the mechanical method and had better thermostability than TEMPO oxidation method. In addition, the on-site produced enzyme showed similar performance to the commercial enzymes towards the CNF properties. These findings provide new insights into a promising integrated strategy in engineering CNF from PMS with on-site enzyme production as a novel and sustainable approach for PMS management and valorization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Land-use change in the boreal forest region leads to agriculture to be carried out on acid, shallow and low fertility soils. To correct soil fertility and promote crop productivity, manure and inorganic fertilizers are added, increasing the risk for greenhouse gas emissions (GHGE). To reduce the reliance on synthetic soil amendments while taking advantage of locally relevant industrial by-products, wood ash (WA) and paper sludge (SL) have been proposed as soil amendments for a range of soil types. We posited that amending soils with WA, SL and biochar will improve soil health parameters and fertility of boreal soils. Microbial activity resulting to nitrogen losses and availability were assessed. WA had a stronger ameliorative effect on acid boreal soils compared to SL. Both WA and SL increased soil microbial biomass and basal respiration resulting in higher net mineralization and thus significant increases in CO 2 emissions. Co-application of urea with WA or SL further increased net mineralization compared to when used independently. Conversely, the biochar's effect was short-lived and not significant. Nevertheless, addition of biochar was shown to reduce CO 2 emissions in all cases except in WA amended soils. No significant differences were observed in CH 4 emissions across all treatments. WA and SL may improve soil fertility and quality but could also contribute significantly to GHG emissions in acid boreal soils. Further research is recommended to assess the mitigating effect of various biochar feedstocks on GHG emissions when co-applied with WA and SL., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The current data on climate change and environmental degradation are dramatic. The consequences of these changes are already having a significant impact on people's health. Physicians - as advocates of the patients, but also as citizens - have an ethical obligation to be involved in efforts to stop these changes. The European Federation of Internal Medicine (EFIM) strongly encourages the Internal Medicine societies and internists across Europe to play an active role in matters related to climate change and environmental degradation. At a national level, this includes advocating the adoption of measures that reduce greenhouse gas (GHG) emissions and environmental degradation and contributing to policy decisions related to these issues. At a hospital level and in clinical practice, supporting actions by the health sector to reduce its ecological footprint is vital. At the level of EFIM and its associated internal societies, promoting educational activities and developing a toolkit to prepare internists to better care for citizens who suffer from the consequences of climate change. In addition to advocating and implementing effective actions to reduce the ecological footprint of the health industry, recommending the introduction of these themes in scientific programs of Internal Medicine meetings and congresses and the pre- and postgraduate medical training. At a personal level, internists must be active agents in advocating sustainable practices for the environment, increasing the awareness of the community about the health risks of climate change and environmental degradation, and being role models in the adoption of environmentally friendly behaviour., Competing Interests: Declaration of Competing Interest The authors declare they have no conflicts of interest., (Copyright © 2022. Published by Elsevier B.V.)

Developing land use strategies to optimize carbon sinks and improve carbon footprints involves proposing efficient nature-based solutions that industries and businesses can implement while considering financial and legislative constraints. The pulp and paper industry is associated with significant greenhouse gas (GHG) emissions, primarily due to the substantial carbon dioxide (CO2) footprint of its mills. Also, some forestry operations contribute to the release of carbon to the atmosphere in the form of CO2 and methane (CH4). Conversely, this industry could potentially be a significant ally in the fight against climate change by favoring forestry practices that reduce carbon emissions and increase its sequestration, namely, by adding value to industrial by-products (e.g., biosolids) instead of treating them as wastes and landfilling them. Notably, the pulp and paper industry has been seeking alternative uses of its by-products, such as fertilizers to maximize tree growth. In this paper, we identify opportunities and challenges that exist for the pulp and paper industry in regard to recycling industrial by-products to: 1) lower GHG emissions directly at the mill and 2) improve its GHG budget by increasing carbon sequestration in forests and plantations. We illustrate our analyses by describing a case study of a pulp and paper mill in southern Quebec, Canada, that uses its biosolids and other by-products as fertilizers. This case study highlights that this strategy could not only contribute to the reduction of GHGs but could also create added value and improve economic returns of forest operations.

The paper by K. L. Blaxter and J. L. Clapperton (1965) 'Prediction of the amount of methane produced by ruminants. Br J Nutr 19, 511-522' has been cited 656 times according to Web of Science and continues to be cited with increasing frequency to the present day. The analysis described in the paper, or meta-analysis as it would be known now, is of methane production from cattle and sheep based on forty-eight trials using closed-circuit respiration chambers, all carried out at the Hannah Research Institute, Ayr, UK, between 1955 and 1965. Methane emissions per unit of diet fed were shown to vary depending on diet, level of feeding and individual animal. As such, previous notions that methane emissions were essentially proportional to energy intake were set aside. The main reasons for the paper's continuing citation are the set of equations that can be used to predict methane emissions from ruminants when the technically demanding respiration chambers are unavailable, and that it was the first definitive study to describe the complexities of methane emissions with respect to animals and diets. The paper thus provided abundant insights of the relations between ruminant methane emissions and nutritional biology, and rumen microbiology, in particular, that have informed countless research projects in the intervening half-century. Given the importance of methane as a greenhouse gas in the climate change scenario, these insights are at least as relevant today as they were in 1965.

As China's demand for paper products increases, China's paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input-output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China's paper industry. China's waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO 2 emissions per unit of paper consumption during 2000-2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO 2 emissions per unit of paper consumption in China. Since an inverted "U" shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China's waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China's paper industry. Thus, although China's waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China's paper industry.

Alkaline residuals, such as wood ash and lime mud generated from pulp and paper mills, could be recycled as liming agents in sugar maple (Acer saccharum Marsh.) forests affected by soil acidification. The objectives of this study were (1) to evaluate soil chemistry, in particular soil acidity, after the application of three alkaline residuals from the pulp and paper industry, and (2) to determine if these alkaline residuals altered soil greenhouse gas (GHG) emissions as a result of the change in soil pH or due to their chemical composition. Soil properties and GHG fluxes were monitored for two years after alkaline residuals were applied to six forest sites dominated by sugar maple in southeastern Quebec, Canada. Each site received six treatments: wood ash applied at 5, 10 and 20 t ha -1 , lime mud (7.5 t ha -1 ), a mixture of slaker grits and green liquor sludge (7 t ha -1 ) and an unamended control. These treatments had acid-neutralizing power from 0 to 9 t ha -1 . All alkaline residuals buffered soil acidity as a function of their neutralizing power, and more neutralization occurred in the forest floor layer than in the underlying mineral soil. In the forest floor, the alkaline residual treatments significantly increased pH by more than one unit, nearly doubled the base saturation, and reduced exchangeable acidity, Al and Fe concentrations compared to control plots. The CO 2 and N 2 O fluxes were lower after application of alkaline residuals, and this was related to the soil pH increase and the type of alkaline residual applied. Lime mud was more effective at reducing GHG fluxes than other alkaline residuals. We conclude that these alkaline residuals can effectively counteract soil acidity in sugar maple forests without increasing soil GHG emissions, at least in the short term., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: Health care systems contribute significantly to greenhouse gas emissions. One source of these emissions is single-use products. Examination table paper does not confer protection against microbial contamination and thus can be omitted while following infection control standards. The objective is to eliminate the routine use of examination table paper in outpatient oncology clinics at BC Cancer. Methods: A quality improvement approach was used. Examination tables continued to be disinfected using wipes between patients, but table paper was not used. Plan-do-studyact cycles were performed at four regional cancer centres. Results: Pre-intervention, the cancer centres used 19 to 69 rolls of paper monthly. Postintervention, usage declined to 0 to 2 rolls monthly. This was associated with annual cost savings of $3974 and a reduction of 32 501 kg of carbon dioxide emissions. Conclusions: The use of examination table paper can be eliminated in outpatient clinics, resulting in both cost savings and a reduction in carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

China's paper industry development is rapid, but the recycling rate of China's waste paper has been low all the time. Meanwhile, material flow analysis can help determine the flow of waste paper, and life cycle assessment (LCA) is the methodological framework for quantifying greenhouse gas emissions. Therefore, present study integrates these two methods into the model construction of China's waste paper recycling decision system. Present study constructs a benchmark model of China's waste paper recycling decision system in 2017, focusing on the impact of nonstandard waste paper recycling on the economic and environmental benefits of China's domestic waste paper recycling system. This model construction is followed by sensitivity analysis of the relevant parameters affecting the efficiency of the waste paper recycling system. Finally, present study forecasts the system's economic benefits and greenhouse gas (GHG) emissions in the context of integrating and regulating nonstandard recycling vendors. The results show that the economic benefit of China's waste paper recycling in 2017 is approximately 458.3 yuan/t and that the GHG emissions are 901.1 kgCO 2 eq. The standard recovery rate and nonstandard recovery acceptance rate will both have a significant impact on the system's economic benefits and improve the GHG emissions structure. In the context of integrating nonstandard recycling enterprises and individual recycling vendors, the economic benefits will rise to 3312.5 yuan/t in 2030, while GHG emissions will rise to 942.9 kgCO 2 eq. Present study can play a certain guiding role for policy makers in formulating waste paper recycling industry specifications and formulating relevant policies., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Large areas of mine tailings are reclaimed by applying organic amendments such as paper mill sludge (PMS). Although mining industries can use PMS freshly generated by paper mills, operational constraints on paper industries make temporary landfilling of this material an unavoidable alternative for the paper industries, creating the most prominent PMS source for mining industries. This study aimed to quantify soil greenhouse gas (GHG) emissions (NO, CO, and CH) after application of landfilled PMS (LPMS; i.e., excavated from a landfill site at a paper mill) and LPMS combined with a seeding treatment of white clover ( L.) on nonacidic mine tailings site prior to reforestation. Soil NO, CO, and CH fluxes were measured after applications of 50 and 100 Mg dry LPMS ha during two consecutive snow-free seasons on two adjacent sites; LPMS was applied once in the first season. The LPMS application increased NO emissions (7.6 to 34.7 kg NO-N ha, comprising 1.04 to 2.43% of applied N) compared with the unamended control during the first season; these emissions were negligible during the second season. The LPMS application increased CO emissions (∼5800 to 11,400 kg CO-C ha, comprising 7 to 27% of applied C) compared with the unamended control on both sites and in both seasons. Fluxes of CH were negligible. White clover combined with LPMS treatments did not affect soil GHG emissions. These new GHG emission factors should be integrated into life-cycle analyses to evaluate the C footprint of potential symbioses between the mining and paper industries. Future research should focus on the effect of PMS applications on soil GHG emissions from a variety of mine tailings under various management practices and climatic conditions to plan responsible and sustainable land reclamation., (Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Protein transition and circular food system transition are two proposed strategies for supporting food system sustainability. Here we model animal-sourced protein to plant-sourced protein ratios within a European circular food system, finding that maintaining the current animal-plant protein share while redesigning the system with circular principles resulted in the largest relative reduction of 44% in land use and 70% in greenhouse gas (GHG) emissions compared with the current food system. Shifting from a 60:40 to a 40:60 ratio of animal-sourced proteins to plant-sourced proteins yielded a 60% reduction in land use and an 81% GHG emission reduction, while supporting nutritionally adequate diets. Differences between current and recommended total protein intake did not substantially impact minimal land use and GHG emissions. Micronutrient inadequacies occurred with less than 18 g animal protein per capita per day. Redesigning the food system varied depending on whether land use or GHG emissions were reduced-highlighting the need for a food system approach when designing policies to enhance human and planetary health., (© 2024. The Author(s).)

This study aimed to investigate the influence of herbal residues on the fermentation quality and ruminal fermentation of paper mulberry silage. Clove, mint, and purple perilla residues were used as additives. Silage treatments were designed as control (no additives), 5% of clove, 5% of mint, and 5% of purple perilla. After 21 and 75 days of fermentation, the fermentation characteristics, bacterial communities, and ruminal greenhouse gas emissions in vitro incubation of paper mulberry were analyzed. The results showed that the used herbal residues could reduce the protein losses in paper mulberry silage based on the lower contents of ammoniacal nitrogen and nonprotein nitrogen. Compared with control, higher lactic acid and propionic acid contents were observed in the silages treated with mint and purple perilla but with a higher acetic acid content in clove treatment. Real-time sequencing technology (single-molecule real-time) revealed that Lactobacillus was the dominant bacteria in all silages at the genus level, whereas the bacterial abundance in the treated silages differed greatly from control at the species level. Lactobacillus hammesii abundance was the highest in control, whereas Lactobacillus acetotolerans was the first predominant in the treated silages. All the additives enhanced the digestibility of in vitro dry matter significantly. However, purple perilla decreased the production of total gas, methane, and carbon dioxide. The findings discussed earlier suggested that herbal residues have potential effects in improving fermentation quality, reducing protein loss, and modulating greenhouse gas emissions in the rumen of paper mulberry silage by shifting bacterial community composition.

The total amount of global municipal solid waste (MSW) will reach 3.5 billion tons by 2050, thereby bringing tremendous environmental pressure, especially global warming. Large amounts of greenhouse gases (GHGs) have been released during MSW management (MSWM). Accounting for GHG emissions is a prerequisite for providing recommendations on appropriate treatment options to mitigate emissions from MSWM systems. There are many methods involved in estimating emissions. This paper summarizes the computing models commonly used in each process of the integrated MSWM system and emphasizes the influence of parameters and other factors. Compared with other disposal methods, landfilling has the highest emissions, commonly estimated using first-order decay (FOD) methods. Emission reduction can be realized through waste to energy (WtE) and resource recovery measures. IPCC is commonly used for calculating direct emissions, while LCA-based models can calculate emissions including upstream and downstream processes, whose results depend on assumptions and system boundaries. The estimation results of models vary greatly and are difficult to compare with each other. Besides, large gaps exist between the default emission factors (EFs) provided by models and those F measured in specific facilities. These findings provide a systematic view for a bettering understanding of MSW emissions as well as the estimating methods and also reveal the key points that need be developed in the future., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Less than 65% of wastepaper can be recycled, and the remaining wastepaper may end up polluting groundwater and generating greenhouse gas emissions if disposed improperly by using traditional approaches. The concept of circular supply chain practices, which integrates circular thinking into supply chain practices that aim to reach zero waste by exploring novel business models and supply chain functions, has been proposed to address this issue. However, previous studies implementing this concept lacked appropriate methods for structuring an influential model to guide resource allocation, which caused difficulty in developing circular supply chain practices. Thus, a hybrid method is proposed to integrate factor analysis with fuzzy synthetic and decision-making and trial evaluation laboratory methods to enable visual analysis and boost understanding. The results reveal that awareness and engagement are the most influential factors in attempts to achieve zero waste, rather than the recycling, reuse and reduction practices emphasised by previous studies. [ABSTRACT FROM AUTHOR]

Puttaraksa (Canna indica) and Plubplueng (Crinum asiaticum) are plants used for decorative landscaping. Their branches and leaves are cut and discarded to enhance the beauty and attractiveness of the flowers. The discarded parts of the plant are burned, which releases greenhouse gases to the atmosphere. Therefore, this research focused on developing a method for producing paper from the leaves of Puttaraksa and Plubplueng. Pulp was produced from these leaves by using three bases; NaOH, KOH and ash solution in a concentration range of 1-5 % (w/v). The pulp was then boiled in a range of 5-25 minutes. The optimal conditions to produce Puttaraksa paper were 15 minutes boiling time in 4% (w/v) KOH. The chemical components of this paper were 93.74 % holocellulose, 1.55% lignin, and 3.66 % extractives. The physical properties of this paper were 66.43 % brightness, 400 mN tearing resistance, and 1.0 kg/cm² bursting strength. The optimal conditions to produce Plubplueng paper were 15 minutes boiling time in 4% (w/v) ash solution. The chemical components of this paper were 93.25% holocellulose, 5.41% lignin, and 4.24% extractives. The physical properties of this paper were 68.08% brightness, 340 mN tearing resistance, and 0.5 kg/cm² bursting strength. The chemical and physical properties of paper produced from Puttaraksa were similar to paper from mulberry. However, physical properties of Puttaraksa paper were better than those of Plubplueng paper, which make Puttaraksa the better alternative for paper production. [ABSTRACT FROM AUTHOR]

Growing consumption is both necessary to end extreme poverty 1 and one of the main drivers of greenhouse gas emissions 2 , creating a potential tension between alleviating poverty and limiting global warming. Most poverty reduction has historically occurred because of economic growth 3-6 , which means that reducing poverty entails increasing not only the consumption of people living in poverty but also the consumption of people with a higher income. Here we estimate the emissions associated with the economic growth needed to alleviate extreme poverty using the international poverty line of US $2.15 per day (ref.  7 ). Even with historical energy- and carbon-intensity patterns, the global emissions increase associated with alleviating extreme poverty is modest, at 2.37 gigatonnes of carbon dioxide equivalent per year or 4.9% of 2019 global emissions. Lower inequality, higher energy efficiency and decarbonization of energy can ease this tension further: assuming the best historical performance, the emissions for poverty alleviation in 2050 will be reduced by 90%. More ambitious poverty lines require more economic growth in more countries, which leads to notably higher emissions. The challenge to align the development and climate objectives of the world is not in reconciling extreme poverty alleviation with climate objectives but in providing sustainable middle-income standards of living., (© 2023. The World Bank.)

Summary: Despite major improvements in recycling over the last decades, the pulp and paper sector is a significant contributor to global greenhouse gas emissions and other environmental pressures. Further reduction of virgin material requirements and environmental impacts requires a detailed understanding of the global material flows in paper production and consumption. This study constructs a Sankey diagram of global material flows in the paper life cycle, from primary inputs to end‐of‐life waste treatment, based on a review of publicly available data. It then analyzes potential improvements in material flows and discusses recycling and material efficiency metrics. The article argues that the use of the collection rate as a recycling metric does not directly stimulate avoidance of virgin inputs and associated impacts. An alternative metric compares paper for recycling (recovered paper) with total fibrous inputs and indicates that the current rate is at just over half of the technical potential. Material efficiency metrics are found to be more useful if they relate to the reuse potential of wastes. The material balance developed in this research provides a solid basis for further study of global sustainable production and consumption of paper. The conclusions on recycling and efficiency should be considered for improving environmental assessment and stimulating a shift toward resource efficiency and the circular economy. [ABSTRACT FROM AUTHOR]

The present study examines the assumptions, modeling structure, and results of DICE-2023, the revised Dynamic Integrated Model of Climate and the Economy (DICE), updated to 2023. The revision contains major changes in the treatment of risk, the carbon and climate modules, the treatment of nonindustrial greenhouse gases, discount rates, as well as updates on all the major components. Noteworthy changes are a significant reduction in the target for the optimal (cost-beneficial) temperature path, a lower cost of reaching the 2 °C target, an analysis of the impact of the Paris Accord, and a major increase in the estimated social cost of carbon. [ABSTRACT FROM AUTHOR]

Emission trading scheme (ETS) is one of the most important ways to mitigate carbon emissions. As the largest carbon emitter in the world, China implemented ETS policy in 2013. Whether ETS policy can boost enterprise green technological innovation (GTI) quality in China remains to be discussed after reviewing the previous studies. All 318 A-share listed enterprises of China's eight high-carbon emission industries from 2008 to 2021 are chosen to investigate the influence of the ETS policy on enterprise GTI quality by the difference-in-difference (DID) method. Furthermore, heterogeneous effects of ETS policy on the quality of enterprise GTI are analyzed from three aspects: enterprise life cycle, corporate environmental management, and industry classification. The findings indicate that China's ETS policy has a positive influence on the quality of GTI in eight high-carbon emission industries. Further heterogeneity analysis demonstrates (1) China's ETS policy has varying effects on the eight high-carbon emission industries; (2) China's ETS policy can improve GTI quality of enterprises in the maturity stage of their life cycle, but not for those in their growth stage. (3) Comparing the effect of China's ETS policy, GTI quality of enterprises with higher environmental management score is stimulated, while GTI quality of those with lower score is not., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The focus areas for COP-27 include fast-tracking our worldwide evolution to decarbonization in the energy industry and clean energy as the stockholder's effort to restrict global warming to 1.5 °C (2.7 °F) above the levels of pre-industrial. After this COP-27 summit, most of the developing countries will provoke challenges in accomplishing their targets of a carbon neutrality and sustainable economy with the minimum possible greenhouse gas (GHG) emissions. In this regard, the G-7 countries, despite prosperous cautiously, have not prospered in certifying ecological welfare in tandem. Nevertheless, these economies cannot endure their green growth attainments without instantaneously safeguarding their ecological features. To do this, green technologies and environmental taxes are vital apparatuses that can assist in accomplishing carbon neutrality objectives. Consequently, the current study investigates the influence of green technologies, environmental taxes, natural resources, renewable, and fossil fuel energy on GHG emissions in G-7 nations from 1994 to 2020. After confirming the cross-sectional dependency issue, this study uses a battery of second-generation panel methods to estimate the empirical findings. The estimated evidences discovered that green technologies, environmental taxes, and renewable protect environmental quality in the long run. However, natural resources and fossil fuel energy increase the GHG emissions levels. Furthermore, this study suggests that G-7 economies should be more focus on green technologies, imposing environmental taxes eco-innovation related developments, and promote renewable energy projects through the sustainable alteration of their consumption and production processes., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Climate change is altering ecological systems and poses a serious threat to human life. Climate change also seriously influences on livestock production by interfering with growth, reproduction, and production. Livestock, on the other hand, is blamed for being a significant contributor to climate change, emitting 8.1 gigatonnes of CO2-eq per year and accounting for two-thirds of global ammonia emissions. Methane (CH4), nitrous oxide (N2O), and carbon dioxide (CO2) are three major greenhouse gases (GHG) that are primarily produced by enteric fermentation, feed production, diet management, and total product output. Ruminants account for three-quarters of total CO2-equivalent (CO2-eq) emissions from the livestock sector. The global dairy sector alone emits 4.0% of global anthropogenic GHG emissions. Hence, dairy farming needs to engage in environmental impact assessment. Public concern for a sustainable and environmentally friendly farming system is growing, resulting in the significant importance of food-based life cycle assessment (LCA). Over the last decade, LCA has been used in agriculture to assess total GHG emissions associated with products such as milk and manure. It includes the production of farm inputs, farm emissions, milk processing, transportation, consumer use, and waste. LCA studies on milk production would assist us in identifying the specific production processes/areas that contribute to excessive greenhouse gas emissions when producing milk and recommending appropriate mitigation strategies to be implemented for a clean, green, and resilient environment., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

The foremost purpose of the study is to establish a point that an economy of G-7 countries has an abundance of resources to tackle the environmental changes that occur in the world, but these countries are still behind the line because in this modern era, environmental performance changes their shape, dimension, and nature very frequently and create a huge impact on globalization of world economy. To fill this gap, we use green investment, institutional quality, and economic growth on environmental performance for this, we use four proxies for green investment and three proxies for greenhouse gas, and we also use six proxies of institutional quality to do this using period of 1997 to 2021. Moreover, we have used the panel nonlinear autoregressive distributed lag method to evaluate the long-run and short-run asymmetric effects of green investment, institutional quality, and economic growth on greenhouse gas emissions. The findings of the study affirm that the positive change of green investment has a positive and significant relationship with environmental performance, while the negative change of green investment has a significant and positive influence with environmental performance in the long run. Furthermore, the outcomes demonstrate that the positive shock of institutional quality has a positive and significant relationship with environmental performance, while the negative shock of intuitional quality has a significant and positive association with environmental performance in the long run, whereas positive change in economic growth has a positive and significant with the environmental performance, while the negative change of economic growth has a positive effect with environmental performance in the long run. This study finds future precautions that institutional quality has to perform exceptionally and shows results very rapidly, while green investment with economic growth has also made a deadly combination to control greenhouse gas emission, so the role of G-7 countries is pretty clear and straight. Furthermore, it is suggested that governments and policymakers take a proactive stance to promote resource acquisition and investment across all industries. To reduce gas emissions, public interest might also be complementary to private ones. So, economic policymakers, specifically in G-7 countries, should consider strategies that support sustainable economic growth., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This research aims to investigate the presence of environmental Kuznets curve hypothesis while considering the financial sector variables such as financial innovation, financial inclusion, and financial development on the environmental quality as well as achieving the energy efficiency in the Middle Eastern region. Current research employs a panel conditionally homogenous autoregressive (PCHVAR) specification for the annual dataset covering the time 2001-2021. The estimates reveal that in the short run, economic growth and financial sector variables adversely affect the environment quality by emitting more greenhouse gases, whereas in the long run, higher economic growth and developed financial sector help to improve the quality of the environment and energy efficiency. These findings are also verified through the Granger causality test. This research provides insights to establish long-term policies for facilitating investments in green technology and energy conservation in the Middle Eastern region., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In Europe, there has been a significant shift in the movement of people and things. Nonetheless, despite the fact that transportation is an important component of the supply chain, its environmental consequences pose a severe threat to the ecosystem as a whole. As a result, we intend to explore the relationship between transportation, economy, and CO2 emissions. We used the Static method with Pooled OLS, then tested the Granger causality to validate the use of dynamic approach via the GMM system. The major findings revealed that GDP and trade openness had a considerable impact on CO2 emissions. Although the three modes of transportation have different effects on CO2 emissions, road density has a positive and considerable impact on CO2 emissions. The railway network is inversely connected to CO2 emissions. While the quantity of flight passengers has no substantial effect on emissions. In terms of the impulse response function, there is an initial shock in period 2 for the response of air passengers carried to CO2 emissions, followed by convergence back to zero in period 6, whereas road density has a slight decrease in period 2 with a post shock peak in period 4, followed by convergence back to zero in period 5. The variance decomposition results reveal a little increase until the fifth period for road density, air passengers, and trade openness with coefficients equal to 0.0893, 0.636, and 1.573, respectively, after which these three variables offer decreasing coefficients., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Switching between similar food and beverage products may reduce greenhouse gas emissions (GHGe). Here, using consumer data linked to 23,550 product-specific GHGe values, we estimated annual GHGe attributable to product purchases consumed at home in Australia and calculated reductions from specific switches. Potential changes to mean Health Star Rating, mean energy density and the proportion of ultraprocessed foods purchased were assessed. Approximately 31 million tonnes of GHGe were attributable to products consumed at home in 2019, the three highest contributors of GHGe being 'meat and meat products' (49%), 'dairy' (17%) and 'non-alcoholic beverages' (16%). Switching higher-emission products for 'very similar' lower-emission products could reduce total emissions by 26%. Switches to 'less similar' lower-emission products could lead to a 71% reduction. Switches had little impact on the average Health Star Rating, energy density of purchases and proportion of ultraprocessed foods purchased. Directing manufacturing and marketing towards lower-environmental-impact products and signposting such options to consumers are key., (© 2024. The Author(s).)

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

Variable renewable energy-based power is expected to increase toward a sustainable society, although the power cannot be dispatched effectively due to its intermittent nature. To accelerate renewable energy implementation, we simulated energy flows of paper mills installing wind energy and evaluated their potentials to function as energy hubs for appropriate early-stage design. We targeted 39 Japanese paper mills assumed to have thermal energy storage, wind–thermal energy converters and regional woody biomass installed, and analyzed the amount of power and heat selling and life cycle greenhouse gas emissions. The results for the paper mills were compared with conventional mills to examine effective conditions for greenhouse gas reduction. The amount of power or heat selling depended on the capacity of the paper mill and the installed equipment. Most paper mills could reduce greenhouse gas using thermal energy storage, wind energy, and woody biomass. The paper mill with the highest life cycle greenhouse gas reduction, compared with conventional mills, could achieve a 190% reduction. To function as a cogeneration energy hub, the equipment installed in paper mills should be designed according to the conditions of the paper mills and their regions. • Paper mills have potential as energy hubs by integrating variable renewable energy. • Thermal energy storage and wind–thermal energy converters were studied. • Energy flows and greenhouse gas emissions of paper mills were simulated. • Most mills could provide stable power and/or heat supplies and reduce emissions. [ABSTRACT FROM AUTHOR]

Dietary shifts are key for enhancing the sustainability of current food systems but need to account for potential economic, social and environmental indirect effects as well. By tracing physical quantities of biomass along supply chains in a global economic model, we investigate the benefits of adopting the EAT-Lancet diet and other social, economic and environmental spillovers in the wider economy. We find that decreased global food demand reduces global biomass production, food prices, trade, land use and food loss and waste but also reduces food affordability for low-income agricultural households. In sub-Saharan Africa, increased food demand and higher prices decrease food affordability also for non-agricultural households. Economic spillovers into non-food sectors limit agricultural land and greenhouse gas reductions as cheaper biomass is demanded more for non-food use. From an environmental perspective, economy-wide greenhouse gas emissions increase as lower global food demand at lower prices frees income subsequently spent on non-food items., (© 2023. The Author(s), under exclusive licence to Springer Nature Limited.)