Search

Gyrotrons are used as high-power sources of coherent radiation operating in pulsed and CW regimes in many scientific and technological fields. In this paper, we discuss two of their numerous applications. The first one is in gyrotron-powered electromagnetic wigglers and undulators. The second one is for driving high-gradient accelerating structures in compact particle accelerators. The comparison, between the requirements imposed by these two concepts on the radiation sources on one hand and the output parameters of the currently available high-performance gyrotrons on the other hand, show that they match each other to a high degree. We consider this as a manifestation of the feasibility and potential of these concepts. It is believed that after the first successful proof-of-principle experiments they will find more wide usage in the advanced FEL and particle accelerators. [ABSTRACT FROM AUTHOR]

The frequency agility of a ${W}$ -band gyrotron travelling wave amplifier (gyro-TWA) was demonstrated by the amplification of a frequency-swept input signal (chirp signal). The gyro-TWA was developed to provide high output power and wide bandwidth by using a helically corrugated interaction region. In the experiment a ~0.5-W signal of linearly swept frequency bandwidth of 1 GHz was amplified and a gain of over 30 dB was measured when driven by a 40 keV, 1.5 A, and axis-encircling electron beam. [ABSTRACT FROM AUTHOR]

The global bandgaps of photonic crystal are theoretically analyzed in this paper. The electromagnetic-wave propagation characteristics of photonic bandgap (PBG) structures, which is used in the the millimeter-wave, submillimeter-wave, and terahertz regime vacuum electronic devices and accelerators, were numerically simulated using the finite-element method software high-frequency structural simulator. The dispersion curves of the lattices in different rod radius to-rod spacing ratios and the global bandgaps for the general 2-D PBG structures formed by triangular and square arrays of metal rods were simulated. A mode map that shows the relationship between the structures and the contained modes was plotted and a 220-GHz metallic PBG resonator operating in TE \mathrm {\mathbf {04}} mode was designed for a gyrotron device to verify the theoretical and numerical simulations, and a comparison of mode density and quality factor between the PBG resonator and the equivalent cylindrical resonator has been carried out. [ABSTRACT FROM PUBLISHER]

A 40 A double-anode magnetron injection gun for a 1 MW, 110 GHz gyrotron has been designed. The preliminary design has been obtained by using some trade-off equations. The electron beam analysis has been performed by using the commercially available code EGUN and the in-house developed code MIGANS. The operating mode of the gyrotron is TE22,6 and it is operated in the fundamental harmonic. The electron beam with a low transverse velocity spread ( $$ \delta {\beta_{ \bot \max }} = 2.26\% $$) and the transverse-to-axial velocity ratio of the electron beam (α) = 1.37 is obtained. The simulated results of the MIG obtained with the EGUN code have been validated with another trajectory code TRAK. The results on the design output parameters obtained by both the codes are in good agreement. The sensitivity analysis has been carried out by changing the different gun parameters to decide the fabrication tolerance. [ABSTRACT FROM AUTHOR]

In this paper, a synthesized design of the magnetron injection gun (MIG) for a 200 kW, 42 GHz gyrotron is presented. The synthesis steps involve the selection of the type of the MIG, the development of the design criteria, the selection of initial design parameters and the development of a program for the estimation of the synthesized parameters for the MIG design. The presented approach estimates the cathode, the beam and the anode parameters, enabling one to build a synthesis model of a complete MIG system. [ABSTRACT FROM AUTHOR]