Search

As a commonly used amendment to soil contaminated by heavy metals, biochar has attracted great attention and has been applied for decades due to the benefits to the soil. However, the effects of biochar on the dynamic behavior of soil properties and metal fractions are still unclear. Here, we used two biochars, derived from biowastes (reed and bamboo willow), to treat two cadmium (Cd)-contaminated soils, S1 (loamy sand) and S2 (sandy loam), and determined the dynamic effects. The incubation experiments were designed to investigate the effects of biochar on the dynamic behavior of soil pH, dissolved organic matter (DOM), bioavailable Cd, and the transformation of Cd fractions for 270 days. The results showed that the soil pH, DOM, and bioavailable Cd initially increased and then decreased with incubation time, and the soil pH and DOM were higher, but bioavailable Cd content was lower than the original value. The transformation of the metal fractions changed dynamically, and the exchangeable fraction of Cd decreased with incubation time. Furthermore, the correlation results showed that the DOM can directly control the redistribution of Cd fractions, while soil pH can control it indirectly by regulating the DOM. This study highlighted that biochar can affect soil pH and DOM, redistribute Cd fractions, decrease bioavailable Cd content, and lower the potential risk of heavy metals. This study suggests ways to immobilize heavy metals in contaminated soils using biochar.

The metal-binding characteristics of water-soluble organic matter (WSOM) emitted from biomass burning (BB, i.e., rice straw (RS) and corn straw (CS)) with Cu(II) under various pH conditions (i.e., 3, 4.5, and 6) were comprehensively investigated. Two-dimensional correlation spectroscopy (2D-COS) and excitation–emission matrix (EEM) –PARAFAC analysis were applied to investigate the binding affinity and mechanism of BB WSOM. The results showed that pH was a sensitive factor affecting binding affinities of WSOM, and BB WSOMs were more susceptible to bind with Cu(II) at pH 6.0 than pH 4.5, followed by pH 3.0. Therefore, the Cu(II)-binding behaviors of BB WSOMs at pH 6.0 were then investigated in this study. The 2D-absorption-COS revealed that the preferential binding with Cu(II) was in the order short and long wavelengths (237–239 nm and 307–309 nm) > moderate wavelength (267–269 nm). The 2D-synchronous fluorescence-COS results suggested that protein-like substances generally exhibited a higher susceptibility and preferential interaction with Cu(II) than fulvic-like substances. EEM–PARAFAC analysis demonstrated that protein-like (C1) substances had a greater complexation ability than fulvic-like (C2) and humic-like (C3) substances for both BB WSOM. This indicated that protein-like substances within WSOM played dominant roles in the interaction with Cu(II). As a comparison, RS WSOM generally showed stronger complexation capacity than CS WSOM although they exhibited similar chemical properties and compositions. This suggested the occurrence of heterogeneous active metal-binding sites even within similar chromophores for different WSOM. The results enhanced our understanding of binding behaviors of BB WSOM with Cu(II) in relevant atmospheric environments.

Humic acid (HA) is well known as an inexpensive and effective adsorbent for heavy metal ions. However, the thermodynamics of uranium (U) adsorption onto HA is not fully understood. This study aimed to understand the kinetics and isotherms of U(VI) adsorption onto HA under different temperatures from acidic water. A leonardite-derived HA was characterized for its ash content, elemental compositions, and acidic functional groups, and used for the removal of U (VI) from acidic aqueous solutions via batch experiments at initial concentrations of 0&ndash, 100 mg&middot, L&minus, 1 at 298, 308 and 318 K. ICP-MS was used to determine the U(VI) concentrations in solutions before and after reacting with the HA. The rate and capacity of HA adsorbing U(VI) increased with the temperature. Adsorption kinetic data was best fitted to the pseudo second-order model. This, together with FTIR spectra, indicated a chemisorption of U(VI) by HA. Equilibrium adsorption data was best fitted to the Langmuir and Temkin models. Thermodynamic parameters such as equilibrium constant (K0), standard Gibbs free energy (&Delta, G0), standard enthalpy change (&Delta, H0), and standard entropy change (&Delta, S0), indicated that U(VI) adsorption onto HA was endothermic and spontaneous. The co-existence of cations (Cu2+, Co2+, Cd2+ and Pb2+) and anions (HPO42&minus, and SO42&minus, ) reduced U(VI) adsorption. The high propensity and capacity of leonardite-derived HA adsorbing U(VI) suggests that it has the potential for cost-effective removal of U(VI) from acidic contaminated waters.

Adsorption is an important mechanism to immobilize cadmium (Cd) in soil, for which humic substances have a potential. However, commercial humic substances are either very acidic (pH = 2) or alkaline/Na+-enriched, making them less suitable for use in acid and saline soils. Here, we used leonardite to produce humic adsorbents HA (pH = 4.02), Ca-HA (pH = 10.9), and Ca-CPAM-HA (pH = 9.62) by using HCl, CaCl2, or CaCl2-polyacrylamide as a flocculant. Their elemental compositions, acidity, and spectroscopic properties were determined, and their Cd adsorption characteristics were assessed by batch kinetic and thermodynamic experiments at environmentally relevant concentrations. Further, HA was mixed with Cd-contaminated soils and incubated for a month to assess its effect on Cd immobilization. Good fitting of kinetic adsorption data into pseudo-second-order model, together with FTIR spectroscopic data, suggested the chemisorption mechanism by forming Cd(II)-carboxyl complexes. The maximum adsorption capacity derived from the Langmuir equation was 129, 114, and 110 mg Cd(II)/g for HA, Ca-HA, and Ca-CPAM-HA, respectively. These values are almost the same on carbon-normalized basis. HA reduced acetic acid extractable Cd by 31% or more. Besides their high propensity for Cd adsorption, humic adsorbents are inexpensive, safe, and beneficial to soil quality.

With abundant oxygen-containing functional groups, a humic substance (HS) has a high potential to remediate soils contaminated by heavy metals. Here, HS was first extracted from a leonardite and analyzed for its chemical compositions and spectroscopic characteristics. Then it was assessed for its ability as a washing agent to remove Cd and As from three types of soils (red soil, black soil, and fluvo-aquic soil) that were spiked with those contaminants (Cd: 40.5&ndash, 49.1 mg/kg, As: 451&ndash, 584 mg/kg). The operational washing conditions, including the pH and concentration of the HS, washing time and cycles, and liquid&ndash, soil ratio, were assessed for Cd and As removal efficiency. At pH 7, with an HS concentration (3672 mg C/L) higher than its critical micelle concentration and a liquid&ndash, soil ratio of 30, a single washing for 6&ndash, 12 h removed 41.9 mg Cd/kg and 199.3 mg As/kg from red soil, 33.5 mg Cd/kg and 291.5 mg As/kg from black soil, and 30.4 mg Cd/kg and 325.5 mg As/kg from fluvo-aquic soil. The removal of Cd and As from the contaminated soils involved the complexation of Cd and As with the carboxyl and phenolic groups of HS. Outcomes from this research could be used to develop a tailor-made HS washing agent for the remediation of Cd- and As-contaminated soils with different properties.

The occurrence of uranium (U) and depleted uranium (DU)-contaminated wastes from anthropogenic activities is an important environmental problem. Insoluble humic acid derived from leonardite (L-HA) was investigated as a potential adsorbent for immobilizing U in the environment. The effect of initial pH, contact time, U concentration, and temperature on U(VI) adsorption onto L-HA was assessed. The U(VI) adsorption was pH-dependent and achieved equilibrium in 2 h. It could be well described with pseudo-second-order model, indicating that U(VI) adsorption onto L-HA involved chemisorption. The U(VI) adsorption mass increased with increasing temperature with maximum adsorption capacities of 91, 112 and 120 mg g−1 at 298, 308 and 318 K, respectively. The adsorption reaction was spontaneous and endothermic. We explored the processes of U(VI) desorption from the L-HA-U complex through batch desorption experiments in 1 mM NaNO3 and in artificial seawater. The desorption process could be well described by pseudo-first-order model and reached equilibrium in 3 h. L-HA possessed a high propensity to adsorb U(VI). Once adsorbed, the release of U(VI) from L-HA-U complex was minimal in both 1 mM NaNO3and artificial seawater (0.06% and 0.40%, respectively). Being abundant, inexpensive, and safe, L-HA has good potential for use as a U adsorbent from aqueous solution or immobilizing U in soils.

Cost-effective and eco-friendly washing agents are in demand for Cd contaminated soils. Here, we used leonardite-derived humic substances to wash different types of Cd-contaminated soils, namely, a silty loam (Soil 1), a silty clay loam (Soil 2), and a sandy loam (Soil 3). Washing conditions were investigated for their effects on Cd removal efficiency. Cadmium removal was enhanced by a high humic substance concentration, long washing time, near neutral pH, and large solution/soil ratio. Based on the tradeoff between efficiency and cost, an optimum working condition was established as follows: humic substance concentration (3150 mg C/L), solution pH (6.0), washing time (2 h) and a washing solution/soil ratio (5). A single washing removed 0.55 mg Cd/kg from Soil 1 (1.33 mg Cd/kg), 2.32 mg Cd/kg from Soil 2 (6.57 mg Cd/kg), and 1.97 mg Cd/kg from Soil 3 (2.63 mg Cd/kg). Cd in effluents was effectively treated by adding a small dose of calcium hydroxide, reducing its concentration below the discharge limit of 0.1 mg/L in China. Being cost-effective and safe, humic substances have a great potential to replace common washing agents for the remediation of Cd-contaminated soils. Besides being environmentally benign, humic substances can improve soil physical, chemical, and biological properties.