Search

This paper presents a new method to diagnose rotor faults in operating three-phase induction motors under the presence of time-varying loads. The proposed diagnostic strategy relies on a combined analysis of the amplitude and phase spectra of the instantaneous active and reactive powers of the motor, and allows to discriminate the effects introduced by a rotor fault from the ones caused by an oscillating load torque, even when these phenomena occur simultaneously. A theoretical analysis carried out using a linearized model of the induction motor in a synchronous reference frame, complemented with several simulation and experimental results, confirms the validity of the proposed diagnostic approach. [ABSTRACT FROM AUTHOR]

This paper proposes the use of the multiple reference frames theory for the diagnosis of stator faults in three-phase induction motors. The development of a simplified mathematical motor model allowed the establishment of the equivalent circuits of the motor, in d-q-0 axes, in the presence of suitor interturn short circuits. The use of the stationary reference frame, clockwise and counterclockwise synchronous reference frames, allows the extraction and manipulation of the information contained in the motor supply currents in a way that the effects introduced by the fault are easily isolated and measured. A severity factor is defined and the simulation and experimental results presented demonstrate its independence in relation to the working conditions of the motor, such as the load level and unbalances in the voltage supply system. Although the technique is here introduced for the diagnosis of suitor faults, it is possible to extend its use for the diagnosis of other asymmetries such as broken rotor ban and air-gap eccentricity. [ABSTRACT FROM AUTHOR]

This paper deals with the use of a new diagnostic technique based on the multiple reference frames theory for the diagnosis of stator winding faults in a direct-torque-controlled (DTC) induction motor drive. The theoretical aspects underlying the use of this diagnostic technique are presented but a major emphasis is given to the integration of the diagnostic system into the digital-signal-processor (DSP) board containing the control algorithm. Taking advantage of the sensors already built in the drive for control purposes, it is possible to implement this diagnostic system at no additional cost, thus giving a surplus value to the drive itself. Experimental results show the effectiveness of the proposed technique to diagnose stator faults and demonstrate the possibility of its integration in the DSP board. [ABSTRACT FROM AUTHOR]

This paper addresses the subject of stator fault diagnosis in direct torque control (DTC) induction motor drives. The particularities of the behavior of a DTC drive, when in the presence of inter-turn short circuits, are exploited, thus allowing the proposal of two different approaches for the diagnosis of this type of fault One of the proposed diagnostic techniques is the well known motor current spectrum analysis. It is demonstrated that in a DTC induction motor drive, with stator inter-turn short circuits, the action of the torque and flux controllers introduce a strong third harmonic in the motor supply currents, which can be used to detect this type of fault. The other diagnostic technique is based on the multiple reference frames theory, recently proposed by the authors for the diagnosis of stator faults in line-connected motors. Here, its use is exploited in the diagnosis of stator faults in DTC induction motor drives. [ABSTRACT FROM AUTHOR]