Search

In this contribution we summarize recent experiments with the objective to generate optimized substrates for surface-enhanced Raman spectroscopy (SERS). For this purpose, the well-established laser-assisted growth technique has been applied, which relies on a precise control of the growth kinetics of supported metal nanoparticles. With this method reproducible and stable SERS substrates with tailor-made optical properties possing best field enhancements were produced for specific excitation wavelengths and detection ranges. Optimization of the SERS substrates has been achieved by stabilizing the localized surface plasmon polariton resonance (SPR) of gold nanoparticles in the vicinity of the laser wavelength of λ=647 nm and λ=785 nm used for SERS excitation. After nanoparticle preparation, SERS spectra of pyrene were obtained using naturally grown nanoparticles and nanoparticles prepared by laser-assisted growth. The most important result is that the optimized substrates prepared by laser-assisted growth exhibit a significantly higher signal-to-noise ratio as compared to naturally grown nanoparticles. They are even better than substrates whose SPR has been tuned to the excitation wavelength by an elevated temperature during preparation. Another important observation is that all SERS spectra exhibit excellent reproducibility and the substrates do not show degradation during the measurements. Finally, the SERS enhancement factors due to the optimized substrates have been estimated and are on the order of 105 to 106. [ABSTRACT FROM AUTHOR]

A distributed feedback (DFB) laser diode emitting at 785 nm was tested and applied as a light source for shifted excitation Raman difference spectroscopy (SERDS). Due to the physical properties of the laser diode, it was possible to shift the emission wavelength by 8 cm-1 (0.5 nm) required for our SERDS measurements by simply changing the injection current. The internal grating ensured single mode operation at both wavelength with the frequency stability of ±0.06 cm-1 (0.004 nm) required for high resolution Raman spectroscopic applications. The shifted spectra were used for calculating enhanced Raman spectra being obscured by a strong scattering background. A 16 dB (≈38 fold) improvement of the signal-to-background noise S̄/σB was demonstrated using blackboard chalk as a sample. The tunable DFB laser is a versatile excitation source for SERDS, which could be used in any dispersive Raman system to subtract fluorescence contributions and scattering background. [ABSTRACT FROM AUTHOR]

We report on hyperfine structure measurements in 21 lines of atomic niobium in the spectral region from 640 nm to 870 nm by means of optogalvanic laser spectroscopy and laser induced fluorescence spectroscopy using a hollow cathode discharge and a tunable single-mode cw ring laser. Hyperfine structure constants A and B of altogether 29 excited energy levels were determined, 18 of them for the first time. [ABSTRACT FROM AUTHOR]

A tunable high resolution cw difference frequency spectrometer applying the non-linear crystal AgGaS[sub 2] and two diode lasers as pump sources and experiments with this setup are presented. In contrast to the majority of known applications of the difference frequency mixing with solid state or gas lasers, we apply two single mode diode lasers with emission wavelengths of 690 nm and 805 nm, respectively. By fixing the emission wavelength of one diode laser and tuning the wavelength of the second laser, by changing temperature or excitation current, we can cover typically 0.87 cm[sup -1] (FWHM) in good agreement with recently published data and theory. With an input power of 20 mW and 6 mW we achieved an output power in the nW-range. To demonstrate the capabilities of the spectrometer we scanned CO and OCS absorption lines near 2107 cm[sup -1] . From these experiments we deduce an overall signal-to-noise ratio of 1000:1 and a spectral resolution better than 30 MHz. With such parameters a trace gas detection of CO at sub-ppm level will be possible. [ABSTRACT FROM AUTHOR]