Search

A soft route for the preparation of catalytically active multilayers of Pt films free from poisoning effects is reported. The SAMs (self-assembled monolayers) were initially formed on the gold substrates and they act as nucleating centers initiating the formation of multilayers of Pt on gold substrates. The nanoscale to mesoscale structures of Pt thus prepared were characterized by SEM and XPS. The SAM-based Pt structures exhibited well-defined hydrogen adsorption, desorption regions associated with very high charge indicating high surface area Pt. The electrocatalytic activity of the multilayers of Pt was characterized by methanol oxidation and a comparison was made with two commercial Pt catalyst preparations.

Indium tin oxide (ITO) glass substrates are widely used in electrochemical devices and as substrates for in situ spectro-electrochemical experiments owing to their interesting optical, electrical and electrochemical properties. In this work, we found ITO surfaces to undergo substantial changes in their properties on potentiodynamic stresses in the acidic pH range. The surface changes occurring during cathodic cycling of ITO were characterized by redox couples in cyclic voltammetry, and the resultant surfaces examined by scanning electron microscopy (SEM), atomic force microscopy (AFM), optical transmittance measurements, X-ray diffraction (XRD) and the compositional changes by X-ray fluorescence spectroscopy (XRF). The studies of electrical, optical and structural properties of ITO during cathodic cycling in the acidic pH range clearly point to a set of conditions that help retaining the stability of ITO substrates intact for electrochemical applications.

Polyanisidine films doped with two different anions, viz., perchlorate and paratoluene sulphonate anions are prepared electrochemically on a gold substrate. Polyanisidine films doped with the anions aid in retaining the redox conductivity of the polyanisidine films. This behaviour is similar to that of polyaniline films. Unlike polyaniline films, even smaller ions like perchlorate and paratoluene sulphonate are sufficient for retaining the redox conductivity of the film, which may be primarily due to the compact, non-permeant films formed during electropolymerization. The films are found to be suitable for the immobilization of glucose oxidase enzyme and are found to be an efficient sensing matrix for glucose. The films also exhibited catalytic activity towards the oxidation of NADH. These studies indicate the usefulness of polyanisidine–anion films as sensing platform for biomolecules.

The layer-by-layer assembly of silver nanoclusters with 3,3'-dithiodipropionic acid (DTDPA) as spacers was prepared through self-assembly on a gold foil and has been characterized by cyclic voltammetric and AFM techniques. The DTDPA molecules acting as spacers between the layers of silver serve as molecular interconnects for the four layers prepared in this work. The organization of layers was found to decrease with an increase in the number of layers. The layer-by-layer assembly of silver clusters motivated us to prepare silver nanowires stabilized by the bifunctional molecules DTDPA through template synthesis using cellulose nitrate membranes. The nanostructures formed by this method were characterized by SEM, TEM, AFM, FTIR, CV, and photoluminescence studies. It is observed that the DTDPA molecules, instead of forming molecular interconnects, protect the structures by self-assembling themselves along the edges of the nanostructures. The concept of self-assembly protecting the nanostructures is demonstrated in this work.

Polyol mediated synthesis for the preparation of tungsten trioxide and titanium doped tungsten trioxide has been reported. The reaction was carried out using chlorides of tungsten and titanium in diethylene glycol medium and water as the reagent for hydrolysis at 190 deg. C. Formation of a blue coloured dimensionally stable suspension of the precursor materials was observed during the course of the reaction. The particle sizes of the precursor materials were observed to be around 100 nm. The precursor materials were annealed to give tungsten trioxide and titanium doped tungsten trioxide. The precursor materials were characterised using TGA/DTA, FT-IR, optical spectra, SEM, TEM and powder XRD methods. It was observed that the doping of titanium could be effected at least up to 10% of Ti in WO{sub 3}. The TGA/DTA studies indicated that WO{sub 3-x}.H{sub 2}O is the dominant material that formed during the polyol mediated synthesis. The XRD data of the annealed samples revealed that the crystalline phase could be manipulated by varying the extent of titanium doping in the tungsten trioxide matrix.

There is a growing interest in devising wet chemical alternatives for physical deposition methods for applications involving thin films, e.g., catalysis. Deposition of platinum on thin gold films is often a problem leading to incomplete coverage and improper adhesion to solid surfaces. Gold substrates often need pre-activation for achieving complete coverage. We demonstrate here that dendrimers with proper functionalities and size work as well-defined nucleating agents and adhesion promoters. This feature is demonstrated using an amine-terminated dendrimer of generation 4.0. This approach allows one to obtain adherent nanoparticulate films of platinum on gold. Unlike other nucleating agents and adhesion promoting compounds, dendrimers have a well-defined ordered structure in terms of their space filling ability. The stability of the films obtained with adsorbed dendrimers is demonstrated using the electrocatalytic reactions of fuels like methanol. The films formed without dendrimers cannot sustain the electro-oxidation currents due to the instability of the films while the films formed with dendrimers can sustain currents for longer duration and for several cycles. The dendrimer-derived Pt films exhibit higher catalytic activity compared to other methods

In this paper, the electrochemical current rectification phenomenon exhibited at an electrochemical interface constituted by a glassy carbon electrode covered with a bilayer of polymer films is discussed. The authors have shown that Methylene Blue (MB) redox species can be confined to a very thin insulating polymer film formed from orthophenylene diamine. The poly(opd) film exhibited excellent blocking properties to redox molecules in solution. On the other hand, the insulating poly(opd) film trapped with MB could mediate electron transfer between the redox molecules in solution and the electrode. Further, a second polymeric layer (Nafion film) trapped with ferrocene redox species was formed as the outer layer over the inner poly (opd) film containing MB. This bilayer-modified electrode, due to the significant difference in the redox potentials of the MB and ferrocene species immobilized in the inner and outer layers, respectively, exhibits unidirectional current flow and the results of the voltammetric investigations on the modified electrodes are described in this communication.

In this work, we examine the electrocatalytic activity of electrodeposited Platinum (Pt)-Nickel (Ni) alloy layers on an inert substrate electrode for methanol oxidation reaction. Analyses using energy-dispersive fluorescent X-ray analysis and powder X-ray diffractometry confirm alloying of Pt with Ni in a range of compositions. Steady-state polarisation measurements in 0.5 M methanol+0.5 M H2SO4 solutions clearly show that the onset of electro-oxidation shifts to less anodic potential values (approximately 160 mV), while also exhibiting current enhancements up to ~15 times the currents obtained for the pure Pt electrodeposit. A linear relationship between the cyclic voltammetric peak (oxidation) current and [MeOH] is observed at a scan rate of 50 mVs−1, thus indicating reduced influence of adsorbed CO (COads) surface poison. A critical composition, Pt (92%)/Ni (8%) [denoted Pt-Ni(3) alloy] is found to exhibit maximum electrocatalytic activity, beyond which the activity drops, whereas pure Ni does not catalyse the reaction. While the promotion of electro-oxidation is understood to be largely due to the alloy catalyst, surface redox species of Ni oxide formed during the electro-oxidation process may also contribute to the oxygenation of COads, thereby enhancing the oxidation current. Plausible mechanisms of methanol oxidation on Pt/ transition metal alloy electrocatalysts are discussed in terms of electron transfer (in the alloy) and the role of Ni oxide species.

In this work, conducting polymer incorporated gold nanoparticles are synthesized through a sequence of chemical and electrochemical routes. These materials are characterized using TEM and FE-SEM techniques. The advantages of these films are demonstrated for sensing biologically important compounds such as dopamine and uric acid in presence of excess ascorbic acid. The PEDOT matrix is recognized to be responsible for the peak separation (selectivity) while also favouring catalytic oxidation of the above compounds and the nanometer-sized gold particles allow nanomolar sensing of DA and UA (sensitivity). Thus, it is possible to detect nanomolar levels of DA and UA in presence of excess of AA.

Electrochemical reactions occur at electrode/electrolyte interfaces. Hence, manipulation and design of electrochemical interfaces accompanied by surface modifications have assumed vital importance. Molecular level modification, either at the monolayer or multilayer level of electrode surfaces and leading to functionalization of electrodes, is being actively pursued by researchers. Modification based on the self-assembled monolayer approach has enabled electrodes to acquire molecular recognition and molecular electronic characteristics. Functionalization of electrode surfaces using polymeric materials and enzymes has facilitated electrodes in exhibiting properties like catalysis, molecular recognition, electrochromism and birefringence. The results of such molecular level functionalization studies of electrode surfaces carried out recently in our laboratories are presented in this overview. Besides, some representative results reported from elsewhere are also included.

Simultaneous underpotential deposition of lead and thallium from a tartrate medium on a polycrystalline silver electrode is reported. Results of cyclic voltammetric investigations of the effects of concentration and sweep rate on the codeposition behaviour are discussed. Further investigations of the codeposition behaviour through voltammetric experiments using programmed potential inputs are described and discussed in terms of formation of a two-dimensional alloy. Finally, the validity of the existing models of electrochemical phase formation has been investigated under the codeposition conditions.

In this work, gold-incorporated polyethylenedioxythiophene nanocomposite material has been synthesized chemically, employing reverse emulsion polymerization method. Infrared and Raman spectroscopic studies revealed that the polymerization of ethylenedioxythiophene leads to the formation of polymer polyethylenedioxythiophene incorporating gold nanoparticles. Scanning electron microscope studies showed the formation of polymer nanorods of 50–100 nm diameter and the X-ray diffraction analysis clearly indicates the presence of gold nanoparticles of 50 nm in size.

Formation of self assembled monolayers on gold surface by thiols and disulphides is a well known phenomenon and extensive research work has been carried out in this area with envisaged applications in the area of sensors, molecular electronics, lithography, device fabrication using bottom-up approach, etc. Recently, it has been established that thiophene molecules can self assemble on gold surface due to Au-S interactions. 3-(3-thienyl) acrylic acid, a bifunctional ligand is used in this work to form self-assembled monolayers on planar gold surfaces (two dimensional assemblies) and to prepare monolayer protected gold nano clusters (three-dimensional assemblies). The electron transfer blocking properties of the two-dimensional monolayers were evaluated by using standard redox probes like ferrocyanide anions and Ruthenium hexamine cations. The functionalisation of the two-dimensional and three-dimensional assemblies has been carried out with ferrocene carboxylic acid and the functionalised monolayers were characterized by Cyclic voltammetry. The formation of thienyl acrylic acid protected nanoclusters has been verified by TEM and surface plasmon resonance absorption. It has been observed that when thiophene based ligands are used as stabilizers for the formation of metal nanoparticles, they tend to aggregate as a result of pi-pi interactions between adjacent thiophene ligands. In this case it is found that aggregation is prevented. The substituent at the thiophene ring hinders pi-pi interactions. The quantised nature of electrochemical charging of these nanoparticles has been demonstrated by differential pulse voltammetry (DPV), which exhibit peak like features (coulomb's staircase). This work also explores the possibility of using 3-(3-thienyl) acrylic acid as building blocks or spacers on planar and colloidal gold surfaces for potential applications in the field of sensors and devices.

In this work, conducting polymer impregnated gold nanoparticles are synthesized through a sequence of chemical and electrochemical routes. The nanocomposite film is characterized using UV-vis, FTIR spectroscopy, and SEM techniques to study the formation of oxidized PEDOT and Au0. The advantages of these films are demonstrated for sensing biologically important compounds such as dopamine and uric acid in presence of excess ascorbic acid, one of the major interferants in the detection of DA and UA (mimicking the physiological conditions), with superior selectivity and sensitivity when compared to the polymer film alone. Simultaneous determination is realized at 115 mV and 246 mV for DA and UA, respectively. The PEDOT matrix is recognized to be responsible for the peak separation (selectivity) while also favouring catalytic oxidation of the above compounds and the nanometer-sized gold particles allow nanomolar sensing of DA and UA (sensitivity). Thus, it is possible to detect nanomolar levels of DA and UA in presence of excess of AA. The combined effect of Au nanoparticles and the PEDOT matrix is rationalized that the Aunano surrounded by a "hydrophobic sheath (PEDOT)" tending to reside within these hydrophobic regions of PEDOT, thus favouring the selectivity and sensitivity of the DA/UA detection. This new generation of nanocomposites is expected to enhance the value of electroanalytical techniques, as it is possible to tune their properties suiting the analytical needs.