Search

BACKGROUND Major depressive disorder (MDD) is a global health issue that affects 350 million people of all ages. Although between 2% and 5.6% of affected individuals are adolescents, research on young patients is limited. The inflammatory response contributes to the onset of depression, and in adult MDD patients, symptom severity has been linked to chemokine levels. AIM To determine the differences in circulatory levels of chemokines in healthy volunteers (HVs) and adolescents with MDD, and assess the changes induced by fluoxetine consume. METHODS The 22 adolescents with MDD were monitored during the first 8 wk of clinical follow-up and clinical psychiatric evaluation was done using the Hamilton depresión rating scale (HDRS). The serum levels of monocyte chemoattractant protein-1 (MCP-1), macrophage inflammatory protein (MIP)-1α, MIP-1β, interleukin (IL)-8, interferon gamma-induced protein (IP)-10, and eotaxin were measured in patients and HVs. RESULTS In all cases, significant differences were detected in circulating chemokine levels between patients before treatment and HVs (P < 0.0001). All chemokines decreased at 4 wk, but only MCP-1 and IL-8 significantly differed (P < 0.05) between 0 wk and 4 wk. In the patients, all chemokines rose to their initial concentrations by 8 wk vs 0 wk, but only IP-10 did so significantly (P < 0.05). All patients experienced a significant decrease in HDRS scores at 4 wk (P < 0.0001) and 8 wk (P < 0.0001) compared with 0 wk. CONCLUSION Despite the consumption of fluoxetine, patients had significantly higher chemokine levels, even after considering the improvement in HDRS score. The high levels of eotaxin, IP-10, and IL-8 partially explain certain aspects that are affected in MDD such as cognition, memory, and learning.

The expression of heterologous proteins in Escherichia coli is strongly affected by the type of carbon source used. In this work, the expression of a synthetic codon-optimized gene of human interleukin-2 in E. coli BL21-SI, carrying plasmid pET12a-hIL2 is presented. Glucose, fructose or Agave syrup from Agave salmiana, were used as carbon sources for production of recombinant human IL-2 (rhIL-2) in 1.5-L bioreactor aerobic cultures using mineral medium. Codon optimization of the native hIL-2 gene eliminated the presence of 35 rare codons for E. coli, and improved the codon usage up to 76% compared with the native gene sequence. Cultures using 10 g/L glucose showed the lowest production of rhIL-2, and in contrast, cultures using fructose improved the production of rhIL-2 1.9-times. The utilization of fructose from Agave syrup enhanced the rhIL-2 production 3.9-times, reaching 103.42±6.61 mgIL-2/L. The specific rhIL-2 production rate (5.52±0.33 mgIL-2/gDCW·h) using Agave syrup was also the highest. These results indicate that Agave syrup stimulates the production of rhIL-2 and it is an inexpensive alternative carbon source. This research abilities the potential use the Agaves to produce alternative and valuable biotechnological products instead the alcoholic beverages.

A complex mixture of peptides plays a key role in the regulation of the immune system; different sources as raw materials mainly from animals and vegetables have been reported to provide these extracts. The batch-to-batch product consistency depends on in-process controls established. However, when an immunomodulator is a customized product obtained from the same volunteer who will receive the product to personalize the treatment, the criteria to establish the consistency between volunteers are different. In this sense, it is expected to have the same molecular weight range although the profile of peptide abundance is different. Here, we characterized the peptide profile of three extracts of an immunomodulator obtained from the urine of different volunteers suffering from three different diseases (i.e., allergic rhinitis, rheumatoid arthritis, and chronic rhinopharyngitis), using size exclusion chromatography (SEC) and mass spectrometry (MS). The peptides contained in the immunomodulators were stable after six months, stored in a refrigerator. Our results showed a chromatographic profile with the same range of low molecular weight (less than 17 kDa) in all analyzed samples by SEC; these results were also confirmed by MS showing an exact mass spectrum from 3 to 13 kDa. The fact that the peptide profiles were conserved during a six-month period at refrigeration conditions (2 to 8°C) maintaining the quality and stability of the immunomodulator supports the notion that it might be an alternative in the treatment of chronic hypersensibility disorders.

Therapeutic monoclonal antibodies (mAbs) are complex bioengineered proteins that require to be routinely characterized with robust and reliable bioassays. Infliximab was the first anti-TNFα mAb approved for use in humans and its use has revolutionized the treatment TNF-mediated inflammatory disorders. The mechanism of action (MOA) of infliximab involves its binding to soluble (s) and membrane (m) TNFα. Here, we describe two simple in vitro bioassays for the assessment of key activities of infliximab. First, a bioassay for TNFα neutralization, which evaluates the Fab binding to sTNFα and the consequent reduction in the activation of TNFα receptors and TNFα-induced expression of adhesion molecules on endothelial cells. A second bioassay evaluates the triggering of Complement-Dependent Cytotoxicity (CDC) in cells expressing mTNFα, which requires the interaction of infliximab-Fc with proteins of the complement system. In both cases, the biological responses are measured by flow cytometry, which is accessible for most laboratories. The methods reported here can be easily adapted to other therapeutic mAbs with similar MOA.

The development of biotherapeutics requires continuous improvement in analytical methodologies for the assessment of their quality attributes. A subset of biotherapeutics is designed to interact with specific antigens that are exposed on the membranes of target cells or circulating in a soluble form, and effector functions are achieved via recognition of their Fc region by effector cells that induce mechanisms such as antibody-dependent cell-mediated cytotoxicity (ADCC). Thus, ADCC induction is a critical quality attribute (CQA) that must be evaluated to ensure biotherapeutic efficacy. Induction of ADCC can be evaluated by employing effector cells from different sources, such as peripheral blood mononuclear cells (PBMC) and genetically modified cell lines (e.g., transfected NKs or Jurkat cells), and different approaches can be used for detection and results interpretation depending on the type of effector cells used. In this regard, validation of the assays is relevant to ensure the reliability of the results according to the intended purpose. Herein, we show the standardization and validation of ADCC assays to test the potency of three biotherapeutic proteins using primary NK cells obtained from fresh blood as effector cells and detecting cell death by flow cytometry. The advantage of using primary NKs instead of modified cells is that the response is closer to that occurring in vivo since cytotoxicity is evaluated in a direct manner. Our results indicate that in all cases, the assays exhibited a characteristic sigmoidal dose/response curve complying with accurate, precise and specific parameters. Thereby, the validated ADCC assay is an appropriate alternative to evaluate the biological activities of these type of biotherapeutics.

“Transferon Oral” is a peptide-derived product with immunomodulatory properties obtained from the lysis and dialysis of human buffy coat. Its active pharmaceutical ingredient, generically known as Dialyzable Leucocyte Extract, is a mixture of peptide populations with reproducible proportions among batches. “Transferon Oral” modulates IFN-γ, TNF-α, and IL-6 and increases the survival rate in a herpes infection murine model when oropharyngeally (ORO) administered, which correlate with clinical observations where “Transferon Oral” is used as a therapeutic auxiliary in inflammatory diseases. Notwithstanding, how a peptide-derived product elicits systemic modulation of cytokines when ORO administered remains unclear. To shed light on the pharmacology of “Transferon Oral” its peptide components must be known. Ten “Transferon Oral” batches were sequenced by mass spectrometry and the intact peptides were identified. The most abundant peptides were the monomeric human Ubiquitin (Ub), a globular low-molecular mass protein, and an Ub variant which lacks the two-terminal Gly (Ub-GG). Recombinant Ub prevented murine death when ORO administered in a herpes infection murine model. Besides, the percentage of survival increased in groups treated with Transferon Oral+Ub and decreased in groups treated with Ub-depleted “Transferon Oral” respect to the group treated with “Transferon Oral” only. Our findings indicate that the biological properties of “Transferon Oral” are partially associated to the Ub content. They suggest that Ub may activate its extracellular receptor (CXCR-4) in the stomach eliciting systemic immunomodulatory effects via vagus nerve. This is the first report that identifies an active component of “Transferon Oral” with the potential for the development of oral peptide immunomodulators.

Therapeutic antibodies are recombinant proteins used in the treatment of cancer. There is a new generation of monoclonal antibodies with activity against cancer cells, known as antibody-drug conjugates. These molecules are made up of three elements: a monoclonal antibody, a highly potent cytotoxic drug, and a chemical linker that binds them together. The antibody recognizes tumor antigens, thereby allowing targeted delivery of the cytotoxic agent to cancer cells. After recognizing its antigen, the antibody-drug conjugate is endocytosed by the target cells, where the protein fraction is degraded into lysosomes, releasing the cytotoxic drug. This article reviews antibody-drug conjugates general characteristics and describes the clinical evidence of efficacy and safety of the first four approved by regulatory agencies in the United States and Europe.Los anticuerpos terapéuticos son proteínas recombinantes empleadas en el tratamiento del cáncer. Existe una nueva ­generación de anticuerpos monoclonales con actividad contra las células cancerosas, conocidos como anticuerpos conjugados a fármacos. Estas moléculas están integradas por tres elementos: un anticuerpo monoclonal, un fármaco citotóxico con alta potencia y un enlazador químico que los une. El anticuerpo reconoce antígenos tumorales, por lo que permite la entrega dirigida del agente citotóxico hacia las células cancerosas. Tras el reconocimiento de su antígeno, el anticuerpo conjugado a fármaco es endocitado por las células blanco, donde se induce la degradación lisosomal de la fracción proteica y se libera el fármaco citotóxico. En el presente artículo se revisan las características generales de los anticuerpos conjugados a fármacos y se describe la evidencia clínica de la eficacia y seguridad de los primeros cuatro aprobados por las agencias reguladoras de Estados Unidos y Europa.

espanolLos anticuerpos terapeuticos son proteinas recombinantes empleadas en el tratamiento del cancer. Existe una nueva generacion de anticuerpos monoclonales con actividad contra las celulas cancerosas, conocidos como anticuerpos conjugados a farmacos. Estas moleculas estan integradas por tres elementos: un anticuerpo monoclonal, un farmaco citotoxico con alta potencia y un enlazador quimico que los une. El anticuerpo reconoce antigenos tumorales, por lo que permite la entrega dirigida del agente citotoxico hacia las celulas cancerosas. Tras el reconocimiento de su antigeno, el anticuerpo conjugado a farmaco es endocitado por las celulas blanco, donde se induce la degradacion lisosomal de la fraccion proteica y se libera el farmaco citotoxico. En el presente articulo se revisan las carac EnglishTherapeutic antibodies are recombinant proteins used in the treatment of cancer. There is a new generation of monoclonal antibodies with activity against cancer cells, known as antibody-drug conjugates. These molecules are made up of three elements: a monoclonal antibody, a highly potent cytotoxic drug, and a chemical linker that binds them together. The antibody recognizes tumor antigens, thereby allowing targeted delivery of the cytotoxic agent to cancer cells. After recognizing its antigen, the antibody-drug conjugate is endocytosed by the target cells, where the protein fraction is degraded into lysosomes, releasing the cytotoxic drug. This article reviews antibody-drug conjugates general characteristics and describes the clinical evidence of efficacy and safety of the first four approved by regulatory agencies in the United States and Europe.

Prostate cancer (PCa) is the second most frequently diagnosed cancer in men worldwide. Dialyzed Leukocyte Extracts (DLEs) are heterogeneous mixtures of low-molecular-weight peptides that improve clinical responses in various diseases. Here, we analyzed the effects of TransferonTM, a commercial DLE with characterized active pharmaceutical ingredient and proven batch-to-batch reproducibility, in preclinical models of PCa. We employed v-Src-transformed murine prostate epithelial (PEC-Src) cells, which recapitulate the transcriptional profiles in human PCa, can be grown in immunocompetent mice, and consistently form bone and brain metastases. In vitro, TransferonTM did not induce cytotoxicity nor alterations in migration /invasion of PEC-Src cells. In vivo, TransferonTM reduced metastatic dissemination after intracardiac injection of PEC-Src and inhibited tumor growth of subcutaneous isotransplants. The antineoplastic effect of TransferonTM correlated with changes in tumor infiltration, increased serum concentrations of IL-12 and CXCL1, and reduced levels of VEGF. Our results suggest that the antineoplastic effect produced by TransferonTM is due to its immunomodulatory activity and not by a direct effect on cancer cells, and indicate that TransferonTM could be beneficial as adjuvant therapy in PCa patients.

Complex pharmaceuticals are in demand of competent analytical methods able to analyze charge heterogeneity as a critical quality attribute (CQA), in compliance with current regulatory expectations. A notorious example is glatiramer acetate (GA), a complex polypeptide mixture useful for the treatment of relapsing-remitting multiple sclerosis. This pharmaceutical challenges the current state of analytical technology in terms of the capacity to study their constituent species. Thus, a strong cation exchange methodology was designed under the lifecycle approach to support the establishment of GA identity, trough the evaluation of its chromatographic profile, which acts as a charge heterogeneity fingerprint. In this regard, a maximum relative margin of error of 5% for relative retention time and symmetry factor were proposed for the analytical target profile. The methodology met the proposed requirements after precision and specificity tests results, the former comprised of sensitivity and selectivity. Subsequently, method validation was conducted and showed that the method is able to differentiate between intact GA and heterogeneity profiles coming from stressed, fractioned or process-modified samples. In summary, these results provide evidence that the method is adequate to assess charge heterogeneity as a CQA of this complex pharmaceutical.

Analytical methods have been considered the “eyes” for development, characterization and batch releasing of biotherapeutics over the past 40 years. One of the most powerful analytical platform for biotherapeutic analysis is mass spectrometry coupled to liquid chromatography (LC-MS). Due to its wide flexibility and instrumental configurations, LC-MS can determine different physicochemical attributes of proteins, e.g. molecular mass, primary sequence, and posttranslational modifications. Intact molecular mass analysis of therapeutic proteins is essential to confirm their identity. Analytical methods must be validated to support drug quality information during its approval process. Although there are international guidelines that provide general information on validation of analytical methods, practical examples about the design, selection of validation attributes and acceptance criteria of identity LC-MS methods are scarce. Here, according to the recommendations of Q2R1 ICH guideline, we showcase the validation of an LC-MS-TOF method to identity rituximab by determining its intact and deglycosylated molecular mass profiles. The proposed method specifically identified the m/z profile and deconvoluted mass profile of rituximab from deglycosylated rituximab and from excipient blank (specificity) with a maximum error of 76.63 ppm (accuracy) and a maximum Relative Standard Deviation (RSD) of 0.00315% (precision). Besides, the system suitability test, which was based on the expected mass value of the mass calibrator, confirmed the reliability of the analytical results. In summary, validation showed that the proposed method is suitable for identifying rituximab based on its glycosylated (intact) and deglycosylated mass profile.

Background Glatiramer acetate (GA) is a drug for Multiple Sclerosis (MS) treatment. However, its administration induces anti-drug antibodies (ADA). This research evaluated the sex differences in humoral response against GA in RR-MS patients Methods We analyzed 69 RR-MS patients, 43 treated with GA and 26 treated with IFN-β. In all cases, the serum concentration of IgG antibodies was determined by UPLC, whereas the levels of IgG subclasses (1–4) of anti-GA antibodies and the concentration of IL-6 were detected by Multiplex and IL-10, and IFN-γ were detected by ELISA. Results The total concentration of IgG antibodies in patients did not differ between treatments, whereas the IgG levels of ADA were higher in male and female patients treated with GA (P ≤ 0.0001). The subclasses of IgG anti-GA antibodies were as follows: IgG4>>IgG3>IgG1>IgG2. Statistical analysis showed differences in the IgG2 (P ≤ 0.01) and IgG4 (P ≤ 0.0001) subclasses by sex in RR-MS patients. Levels of IgG1 subclass in male patients correlated positively with the circulatory levels of IL-6 (rs = 0.587, P ≤ 0.04) and IFN-γ (rs = 0.721, P ≤ 0.001), while IgG2 subclass levels in female patients correlated with serum levels of IFN-γ (rs = 0.628, P ≤ 0.0006). Statistical analysis did not detect correlations between the levels of IgG (1–4) subclasses of anti-GA antibodies and the evaluated clinical parameters. Conclusion This study showed differences in the levels of IgG2 and IgG4 subclasses of ADA between male and female RR-MS patients. Further studies are necessary to take advantage of the clinical potential of this finding.

Transferon® is a complex drug based on a mixture of low molecular weight peptides. This biotherapeutic is employed as a coadjuvant in clinical trials of several diseases, including viral infections and allergies. Given that macrophages play key roles in pathogen recognition, phagocytosis, processing, and antigen presentation, we evaluated the effect of Transferon® on phenotype and function of macrophage-like cells derived from THP-1 monocytes. We determined the surface expression of CD80 and CD86 by flow cytometry and IL-1β, TNF-α, and IL-6 levels by ELISA. Transferon® alone did not alter the steady state of PMA-differentiated macrophage-like THP-1 cells. On the contrary, simultaneous stimulation of cells with Transferon® and LPS elicited a significant increase in CD80 (P≤0.001) and CD86 (P≤0.001) expression, as well as in IL-6 production (P≤0.05) compared to the LPS control. CD80 expression and IL-6 production exhibited a positive correlation (r=0.6, P≤0.05) in cells exposed to Transferon® and LPS. Our results suggest that the administration of Transferon® induces the expression of costimulatory molecules and the secretion of cytokines in LPS-activated macrophages. Further studies are necessary to determine the implication of these findings in the therapeutic properties of Transferon®.

Disulfide bonds are post-translational modifications that provide conformational stability to proteins relevant to perform their biological functions. In this study, the quantification of free thiols by using Ellman’s reagent was validated to demonstrate, that the Filgrastim contained in the Filatil® exhibits the same amount of disulfide bonds than its reference product under both native and denaturing-reducing conditions. The validation exercise demonstrated to be suitable for its intended use. The comparability exercise for this attribute showed no significant differences (p=1.000; α , 0.05) in free cysteines content among the two evaluated products. These results provide evidence of similitude for this attribute, which along with an extended comparability exercise for other physicochemical characteristics, contribute to the demonstration of similarity among the physicochemical and functional properties set as critical quality attributes for Filgrastim according to the regulatory guidelines.

Biotherapeutic products which are derived from living organisms using recombinant DNA technology significantly contribute to the progress in the treatment of life-threatening and chronic diseases. The worldwide sale of biological drugs in 2016 was near US $263,700 million. In Latin America, where monoclonal antibodies market was worth US $7000 million, being Mexico the second largest market. Approval is one of the key aspects which influences the market of medicinal products, thus it is responsibility of the regulatory authority to establish a regulatory framework that ensure safety and efficacy of the products, and it is responsibility of the applicants to provide a high quality dossier in accordance with the registration requirements of the country. The applicants submitting registration requests in Mexico need to be aware of the requirements. Similar to many other countries, Mexico has adopted the Common Technical Document (CTD) structure for organizing dossier of the medicinal product for submission into main modules (i.e., quality, non-clinical, and clinical). This facilitates the submission process of medicinal products following a logical sequence aligned to the International Council on Harmonisation (ICH) guidelines. Moreover, this structure improves the transparency and clarity of the dossier in process of evaluation of medicinal products. In Mexico, the Ministry of Health has published a regulation, NOM-257-SSA1-2014, which established the general requirements to be followed by applicants to complete the registration of biotherapeutics. This regulation stipulates that the evaluation process is supported by a regulatory framework involving Good Manufacturing Practices, labeling, stability, clinical trials, biocomparability studies, pharmacovigilance, and a technical evaluation performed by a multidisciplinary team of experts in biotherapeutics development. Additionally, the Mexican regulatory agency, COFEPRIS, has published specific guidelines to facilitate the application process. Despite the availability of this information, the scope is limited to regulatory and administrative purposes, rather than technical-scientific supporting knowledge. The aim of this article is to provide concise information to improve and promote communication between industry and regulatory agencies. Herein, we describe the current process of COFEPRIS in regulating biotherapeutics in Mexico. This process explains the basis for the organization and structure of the technical-scientific information of biotherapeutics required for registration application.

Physicochemical and structural properties of proteins used as active pharmaceutical ingredients of biopharmaceuticals are determinant to carry out their biological activity. In this regard, the assays intended to evaluate functionality of biopharmaceuticals provide confirmatory evidence that they contain the appropriate physicochemical properties and structural conformation. The validation of the methodologies used for the assessment of critical quality attributes of biopharmaceuticals is a key requirement for manufacturing under GMP environments. Herein we present the development and validation of a flow cytometry-based methodology for the evaluation of adalimumab’s affinity towards membrane-bound TNFα (mTNFα) on recombinant CHO cells. This in vitro methodology measures the interaction between an in-solution antibody and its target molecule onto the cell surface through a fluorescent signal. The characteristics evaluated during the validation exercise showed that this methodology is suitable for its intended purpose. The assay demonstrated to be accurate (r 2 = 0.92, slope = 1.20), precise (%CV ≤ 18.31) and specific (curve fitting, r 2 = 0.986–0.997) to evaluate binding of adalimumab to mTNFα. The results obtained here provide evidence that detection by flow cytometry is a viable alternative for bioassays used in the pharmaceutical industry. In addition, this methodology could be standardized for the evaluation of other biomolecules acting through the same mechanism of action.

Glatiramer Acetate (GA) is an immunomodulatory medicine approved for the treatment of multiple sclerosis, whose mechanisms of action are yet to be fully elucidated. GA is comprised of a complex mixture of polypeptides with different amino acid sequences and structures. The lack of sensible information about physicochemical characteristics of GA has contributed to its comprehensiveness complexity. Consequently, an unambiguous determination of distinctive attributes that define GA is of highest relevance towards dissecting its identity. Herein we conducted a study of characteristic GA heterogeneities throughout its manufacturing process (process signatures), revealing a strong impact of critical process parameters (CPPs) on the reactivity of amino acid precursors; reaction initiation and polymerization velocities; and peptide solubility, susceptibility to hydrolysis, and size-exclusion properties. Further, distinctive GA heterogeneities were correlated to defined immunological and toxicological profiles, revealing that GA possesses a unique repertoire of active constituents (epitopes) responsible of its immunological responses, whose modification lead to altered profiles. This novel approach established CPPs influence on intact GA peptide mixture, whose physicochemical identity cannot longer rely on reduced properties (based on complete or partial GA degradation), providing advanced knowledge on GA structural and functional relationships to ensure a consistent manufacturing of safe and effective products.

This protocol shows the measurement of the apoptotic activity neutralization of TNFα in a mouse fibroblast cell model (WEHI 164) using an anti-TNFα mAb. In addition, this protocol can be used to evaluate other anti-TNFα molecules, such as fusion proteins. The cellular model employed here is sensitive to TNFα-mediated apoptosis when an additional stress factor is induced in cell culture conditions (e.g., serum deprivation). This procedure exemplifies how to execute this analytical assay, highlighting the key operations relating to the sample preparation, cell dilution, apoptosis induction, and spectrophotometric measurements that are critical to ensure successful results. This protocol reveals the best-performance conditions relating to apoptosis induction and efficient signal recording, leading to low uncertainty values.

Biotherapeutic proteins, such as monoclonal antibodies (mAbs), are feasible alternatives for the treatment of chronic-degenerative diseases. The biological activity of these proteins depends on their physicochemical properties. The use of high-performance techniques like chromatography and capillary electrophoresis has been described for the analysis of physicochemical heterogeneity of mAbs. Nowadays, capillary zone electrophoresis (CZE) technique constitutes one of the most resolutive and sensitive assays for the analysis of biomolecules. Besides, the electro-driven separation in CZE is governed by extensive properties of matter and offers the advantage of analyzing proteins close to their native state. However, the successful implementation of this technique for routine analysis depends on the skills of the analyst at the critical steps during sample and system preparation. The purpose of this tutorial is to detail the steps to succeed in the CZE analysis of mAbs. Further, this protocol can be used for the development and improvement of skills of the personnel involved in protein analytical chemistry laboratories.

Transferon, a human dialyzable leukocyte extract (hDLE), is a biotherapeutic that comprises a complex mixture of low-molecular-weight peptides (

In order to demonstrate physicochemical comparability of a recombinant protein medicament as a drug substance (Active Pharmaceutical Ingredient or API), such as Rituximab, one must first choose suitable orthogonal analytical methods that selectively provide information regarding the identity and heterogeneity of the molecule. The application of these methods in the investigation of process-derived variability of the reference molecule can yield valuable information to establish comparability criteria. This could become the basis to determine the critical physicochemical attributes that should be verified by relevant in-process controls and batch release criteria. In this paper we show the determination and analysis of relevant attributes from two different proposed biosimilars. We show differences in Reditux proposed Rituximab biosimilar, mainly in charge heterogeneity patterns, whereas no major differences were found for Kikuzubam as related to the Mabthera reference batches. The detected differences are...

Infliximab is therapeutic monoclonal antibody (mAb) against TNF-α employed in the treatment of immunoinflammatory diseases. The development of biosimilar mAbs is a global strategy to increase drug accessibility and reduce therapy-associated costs. Herein we compared key physicochemical characteristics and biological activities produced by infliximab and infliximab-Probiomed in order to identify functionally relevant differences between the mAbs. Binding of infliximab-Probiomed to TNF-α was specific and had kinetics comparable to that of the reference product. Both mAbs had highly similar neutralizing efficacy in HUVEC cell cultures stimulated with TNF-α. In vitro induction of CDC and ADCC were also similar between the evaluated products. In vivo comparability was assessed using a transgenic mouse model of arthritis that expresses human TNF-α in a 13-week multiple-administration study. Infliximab and infliximab-Probiomed showed comparable efficacy, safety, and pharmacokinetic profiles. Our results indicate that infliximab-Probiomed has highly similar activities to infliximab in preclinical models, warranting a clinical evaluation of its biosimilarity.

Analytical platforms that characterize charge heterogeneity in therapeutic proteins, such as mAbs, are important tools that can be used to define quality attributes. CZE separates protein moieties close to their native state and is a valuable physicochemical analytical method that can be used in parallel with other orthogonal methods for characterization and comparability. In this study, custom conditions for the analysis of charge heterogeneity of two mAbs were developed with regard to critical parameters in the BGE, running conditions, and sample treatment. The method application was tested for up to four mAbs and one mAb fragment. The electropherograms showed specific profiles and contrasting levels of basic and acidic isoforms with respect to the main isoform. Issues that surround this method, such as peak tailing and capillary lifetime, are summarized. Using this method, the identities of rituximab and trastuzumab were confirmed, based on the correspondence between the biosimilars and reference products, noninterference of the sample matrix, and the ability to separate spiked samples of related mAbs. The RSD of the isoform content and migration time for the method repeatability were less than 2 and 1%, respectively.

Etanercept is a recombinant fusion protein approved for the treatment of TNF-αmediated diseases such as rheumatoid arthritis (RA), psoriasis, psoriatic arthritis, and ankylosing spondylitis. Herein, we present an evaluation of the physicochemical and biological properties of a biosimilar etanercept and its reference product followed by a clinical study in patients diagnosed with RA intended to demonstrate comparability of their immunomodulatory activity. Identity analyses showed a total correspondence of the primary and higher-order structure between the two products. In regard to intrinsic heterogeneity, both products showed to be highly heterogenous; however the biosimilar etanercept exhibited similar charge and glycan heterogeneity intervals compared to the reference product. Apoptosis inhibition assay also showed that, despite the high degree of heterogeneity exhibited by both products, no significant differences exist in theirin vitroactivity. Finally, the clinical assessment conducted in RA-diagnosed patients did not show significant differences in the evaluated pharmacodynamic markers of both products. Collectively, the results from the comparability exercise provide convincing evidence that the evaluated biosimilar etanercept can be considered an effective alternative for the treatment of RA.

Dopamine (DA), a neurotransmitter in the central nervous system (CNS), has modulatory functions at the systemic level. The peripheral and central nervous systems have independent dopaminergic system (DAS) that share mechanisms and molecular machinery. In the past century, experimental evidence has accumulated on the proteins knowledge that is involved in the synthesis, reuptake, and transportation of DA in leukocytes and the differential expression of the D1-like(D1R and D5R) and D2-likereceptors (D2R, D3R, and D4R). The expression of these components depends on the state of cellular activation and the concentration and time of exposure to DA. Receptors that are expressed in leukocytes are linked to signaling pathways that are mediated by changes in cAMP concentration, which in turn triggers changes in phenotype and cellular function. According to the leukocyte lineage, the effects of DA are associated with such processes as respiratory burst, cytokine and antibody secretion, chemotaxis, apoptosis, and cytotoxicity. In clinical conditions such as schizophrenia, Parkinson disease, Tourette syndrome, and multiple sclerosis (MS), there are evident alterations during immune responses in leukocytes, in which changes in DA receptor density have been observed. Several groups have proposed that these findings are useful in establishing clinical status and clinical markers.

Interferon-alpha 2b (IFN-alpha 2b) is a recombinant therapeutic cytokine produced as inclusion bodies using a strain of Escherichia coli as expression system. After fermentation and recovery, it is necessary to know the amount of recombinant IFN-alpha 2b, in order to determine the yield and the load for solubilization, and chromatographic protein purification steps. The present work details the validation of a new short run-time and fast sample-preparation method to quantify IFN-alpha 2b in inclusion bodies using Reversed Phase-Ultra Performance Liquid Chromatography (RP-UPLC). The developed method demonstrated an accuracy of 100.28%; the relative standard deviations for method precision, repeatability and inter-day precision tests were found to be 0.57%, 1.54% and 1.83%, respectively. Linearity of the method was assessed in the range of concentrations from 0.05 mg/mL to 0.5 mg/mL, the curve obtained had a determination coefficient (r(2)) of 0.9989. Detection and quantification limits were found to be 0.008 mg/mL and 0.025 mg/mL, respectively. The method also demonstrated robustness for changes in column temperature, and specificity against host proteins and other recombinant protein expressed in the same E. coli strain.

The production of human interferon gamma (hIFN-γ) using a synthetic gene in Escherichia coli BL21-SI was optimized by response surface methodology (RSM) and a Box-Behnken design. The process variables studied were temperature, bio-mass concentration at induction time and the NaCl concentration as inducer. According to the Box-Behnken design, a second order response function was developed. The optimal expression conditions were a temperature of 32.6°C, induction biomass of 0.31 g/L and 0.3 M NaCl in minimal medium. The model prediction for the maximum hIFN-γ production was 77.3 mg/L, which corresponded satisfactorily with the experimental data. The hIFN-γ concentration attained under optimized conditions was 13-times higher than that obtained using the non-optimized conditions. We conclude that RSM is an effective method for the optimization of recombinant protein expression using synthetic genes in E. coli.

Production of periplasmic human interferon-gamma (hINF-gamma) and human interleukin-2 (hIL-2) by the Tat translocation pathway in Escherichia coli BL21-SI was evaluated. The expression was obtained using the pEMR vector which contains the Tat-dependent modified penicillin acylase signal peptide (mSPpac) driven by the T7 promoter. The mSPpac-hINF-gamma was processed and the protein was transported to periplasm. Up to 30.1% of hINF-gamma was found in the periplasmic soluble fraction, whereas only 15% of the mSPpac-hIL-2 was processed, but hIL-2 was not found in the periplasmic soluble fraction.

Comparability between a biosimilar and its reference product requires the evaluation of critical quality attributes that may impact on its pharmacological response. Herein we present a physicochemical characterization of a biosimilar trastuzumab focused on the attributes related to the pharmacokinetic response. Capillary isoelectrofocusing (cIEF) and cation exchange chromatography (CEX) were used to evaluate charge heterogeneity; glycosylation profiles were assessed through hydrophilic interaction liquid chromatography (HILIC); aggregates content was evaluated through size exclusion chromatography (SEC) while binding affinity to FcRn was evaluated using isothermal titration calorimetry (ITC). The biosimilar trastuzumab and its reference product exhibited a high degree of similarity for the evaluated attributes. In regard to the pharmacokinetic parameters, randomized, double blind, and two-arm parallel and prospective study was employed after the administration of a single intravenous dose in healthy volunteers. No significant differences were found between the pharmacokinetic profiles of both products. Our results confirm that similarity of the critical quality attributes between a biosimilar product, obtained from a different manufacturing process, and the reference product resulted in comparable pharmacokinetic profiles, diminishing the uncertainty related to the biosimilar’s safety and efficacy.

Worldwide, the most highly consumed meat is of porcine origin. The production and distribution of swine meat are affected by diverse health matters, such as influenza and diarrhea, which cause head losses and require the use of antibiotics and other drugs in hog farms. To stimulate newborn piglet immune responses and increase resistance to infections, we developed a spray-drying technique to produce dried swine dialyzable spleen extract (sDSE), an immunomodulator. Based on the size-exclusion ultra performance liquid chromatography quantitative analysis, it was possible to recover up to 58% of the product after the drying process. The biological activity of orally administered dried sDSE increased mouse survival and induced cytokine production in a herpes infection model.

Rituximab is a chimeric monoclonal antibody employed for the treatment of CD20-positive B-cell non-Hodgkin’s lymphoma, chronic lymphocytic leukemia, rheumatoid arthritis, granulomatosis with polyangiitis and microscopic polyangiitis. It binds specifically to the CD20 antigen expressed on pre-B and consequently on mature B-lymphocytes of both normal and malignant cells, inhibiting their proliferation through apoptosis, CDC, and ADCC mechanisms. The immunomodulatory activity of rituximab is closely related to critical quality attributes that characterize its chemical composition and spatial configuration, which determine the recognition of CD20 and the binding to receptors or factors involved in its effector functions, while regulating the potential immunogenic response. Herein, we present a physicochemical and biological characterization followed by a pharmacodynamics and immunogenicity study to demonstrate comparability between two products containing rituximab. The physicochemical and biological characterization revealed that both products fit within the same response intervals exhibiting the same degree of variability. With regard to clinical response, both products depleted CD20+ B-cells until posttreatment recovery and no meaningful differences were found in their pharmacodynamic profiles. The evaluation of anti-chimeric antibodies did not show differential immunogenicity among products. Overall, these data confirm that similarity of critical quality attributes results in a comparable immunomodulatory activity.

According to the World Health Organization, the incidence of malignant neoplasms and endocrine, blood, and immune disorders will increase in the upcoming decades along with the demand of affordable treatments. In response to this need, the development of biosimilar drugs is increasing worldwide. The approval of biosimilars relies on the compliance with international guidelines, starting with the demonstration of similarity in their physicochemical and functional properties against the reference product. Subsequent clinical studies are performed to demonstrate similar pharmacological behavior and to diminish the uncertainty related to their safety and efficacy. Herein we present a comparability exercise between a biosimilar trastuzumab and its reference product, by using a hierarchical strategy with an orthogonal approach, to assess the physicochemical and biological attributes with potential impact on its pharmacokinetics, pharmacodynamics, and immunogenicity. Our results showed that the high degree of similarity in the physicochemical attributes of the biosimilar trastuzumab with respect to the reference product resulted in comparable biological activity, demonstrating that a controlled process is able to provide consistently the expected product. These results also constitute the basis for the design of subsequent delimited pharmacological studies, as they diminish the uncertainty of exhibiting different profiles.

Human dialyzable leukocyte extracts (DLEs) are heterogeneous mixtures of low-molecular-weight peptides that are released on disruption of peripheral blood leukocytes from healthy donors. DLEs improve clinical responses in infections, allergies, cancer, and immunodeficiencies. Transferon is a human DLE that has been registered as a hemoderivate by Mexican health authorities and commercialized nationally. To develop an animal model that could be used routinely as a quality control assay for Transferon, we standardized and validated a murine model of cutaneous HSV-1 infection. Using this model, we evaluated the activity of 27 Transferon batches. All batches improved the survival of HSV-1-infected mice, wherein average survival rose from 20.9% in control mice to 59.6% in Transferon-treated mice. The activity of Transferon correlated with increased serum levels of IFN-γand reduced IL-6 and TNF-αconcentrations. Our results demonstrate that (i) this mouse model of cutaneous herpes can be used to examine the activity of DLEs, such as Transferon; (ii) the assay can be used as a routine test for batch release; (iii) Transferon is produced with high homogeneity between batches; (iv) Transferon does not have direct virucidal, cytoprotective, or antireplicative effects; and (v) the protective effect of Transferonin vivocorrelates with changes in serum cytokines.

A synthetic human interferon gamma (hIFN-gamma) gene was fused to SP1 and SP3, two Sec-dependent artificial signal peptides to transport the hIFN-gamma to the periplasm of Escherichia coli BL21-SI. The processing efficiency of both SP1-hIFN-gamma and SP3-hIFN-gamma was dependent on the culture medium as well as the post-induction temperature. Both precursors were processed completely when cells were cultured using minimal medium and a post-induction temperature of 32.5 degrees C, and only the processed hIFN-gamma was detected. The SP3 signal peptide was more efficient than SP1 for the secretion of hIFN-gamma. Sixty percent of the total hIFN-gamma was secreted to the periplasm using the SP3 signal peptide and a post-induction temperature of 20 degrees C. Using Tris-sucrose-dithiothreitol (TSD) hypertonic buffer, the periplasmic soluble hINF-gamma was recovered with a purity of 85%.

A human interferon beta (hINF-beta) synthetic gene was optimized and expressed in Escherichia coli BL21-SI using a vector with the T7 promoter. To determine the best culture conditions such as culture medium, temperature, cell density and inducer concentration, we used the response surface methodology and a Box-Behnken design to get the highest hINF-beta production. The maximum hINF-beta production of 61 mg l(-1) was attained using minimum medium and the following predicted optimal conditions: temperature of 32.5 degrees C, cell density of 0.64, and inducer concentration of 0.30 M NaCl. This is the first report showing the successful performance of the BL21-SI system in a minimum medium. The response surface methodology is effective for the optimization of recombinant protein production using synthetic genes.