Search

The share of inverter-connected renewable energy resources (RESs) is increasing in the grid, with these resources partially displacing conventional synchronous generators. This has resulted in increased variability of active power supply, reduced overall inertia, and increased spatial heterogeneity of inertia, leading to faster system frequency dynamics along with larger and more frequent frequency control events. These effects are expected to become increasingly more important in power system control in next-generation grids, which may conceivably be made up entirely of RESs. To mitigate these challenges, a fast, area-based hierarchical control strategy is proposed. This scheme partitions the power system into small areas, estimates local power imbalances, and corrects them by utilizing local inverter-based resources (IBRs). In cases where sufficient resources are not available locally, power is preferentially sourced from electrically close neighbours using an iterative distributed optimization scheme which preserves information privacy between areas. The proposed frequency control architecture can be retrofit onto existing control systems, and allows for flexibility in the amount of model information available to the designer. The control strategy is validated on two detailed multi-area power system models. Simulation results show that the strategy provides fast and localized frequency control. [ABSTRACT FROM AUTHOR]

Secondary control strategies in hybrid ac/dc microgrids have been conventionally designed independently for each side of the microgrid, neglecting the interaction between the ac and dc sides due to the power transferred through the interlinking converter. This has a negative effect on the power sharing and dynamic response of the system. In this article, a novel distributed secondary control strategy for hybrid ac/dc-microgrids is presented which coordinates the control actions of the ac and dc sides. The proposed control scheme simultaneously regulates ac-voltage magnitude and frequency, as well as the dc-voltage magnitude, by including the interlinking converters in the control strategy via a distributed consensus approach. This improves the power-sharing accuracy and secondary control restoration of the variables in both ac and dc sides of the microgrid. Moreover, the proposed methodology avoids the circulating currents which are typically produced in systems with multiple interlinking converters. Several simulation and experimental tests, such as load impacts and plug-and-play capability, are presented to validate the performance of the proposed control strategy using a 24-kW hybrid ac/dc-microgrid laboratory prototype. [ABSTRACT FROM AUTHOR]

Communication infrastructure (CI) in microgrids (MGs) allows for the application of different control architectures for the secondary control (SC) layer. The use of new SC architectures involving CI is motivated by the need to increase MG resilience and handle the intermittent nature of distributed generation units. The structure of SC is classified into three main categories, including centralized SC (CSC) with a CI, distributed SC (DISC) generally with a low-data-rate CI, and decentralized SC (DESC) with communication-free infrastructure. To meet the MGs’ operational constraints and optimize performance, control and communication must be utilized simultaneously in different control layers. In this survey, we review and classify all types of SC policies from CI-based methods to communication-free policies, including CSC, averaging-based DISC, consensus-based DISC methods, containment pinning consensus, event-triggered DISC, washout-filter-based DESC, and state-estimation-based DESC. Each structure is scrutinized from the viewpoint of the relevant literature. Challenges such as clock drifts, cyber-security threats, and the advantage of event-triggered approaches are presented. Fully decentralized approaches based on state-estimation and observation methods are also addressed. Although these approaches eliminate the need of any CI for the voltage and frequency restoration, during black start process or other functionalities related to the tertiary layer, a CI is required. Power hardware-in-the-loop experimental tests are carried out to compare the merits and applicability of different SC structures. [ABSTRACT FROM AUTHOR]

Distributed control schemes have transformed frequency and voltage regulation into a local task in distributed generators (DGs) rather than by a central secondary controller. A distributed scheme is based on information shared among neighboring units; thus, the microgrid performance is affected by issues induced by the communication network. This paper presents a distributed predictive control applied to the secondary level of microgrids. The model used for prediction purposes is based on droop and power transfer equations; however, communication features, such as connectivity and latency, are also included, thus making the controller tolerant to electrical and communication failures. The proposed controller considers the frequency and voltage regulation control objectives and consensus over the real and reactive power contributions from each power unit in the microgrid. The experimental and simulation results show that the proposed scheme (i) responds properly to load variations, working within operating constraints, such as generation capacity and voltage range; (ii) maintains the control objectives when a power unit is disconnected and reconnected without any user updating in the controllers; and (iii) compensates for the effects of communication issues over the microgrid dynamics. [ABSTRACT FROM AUTHOR]

This document is a summary of a report prepared by the IEEE PES Task Force (TF) on Microgrid Stability Definitions, Analysis, and Modeling, IEEE Power and Energy Society, Piscataway, NJ, USA, Tech. Rep. PES-TR66, Apr. 2018, which defines concepts and identifies relevant issues related to stability in microgrids. In this paper, definitions and classification of microgrid stability are presented and discussed, considering pertinent microgrid features such as voltage-frequency dependence, unbalancing, low inertia, and generation intermittency. A few examples are also presented, highlighting some of the stability classes defined in this paper. Further examples, along with discussions on microgrid components modeling and stability analysis tools can be found in the TF report. [ABSTRACT FROM AUTHOR]

This paper presents a novel distributed control strategy for frequency control, congestion management, and optimal dispatch (OD) in isolated microgrids. The proposed strategy drives the distributed generators (DGs) within the microgrid to a dispatch that complies with the Karush–Kuhn–Tucker (KKT) conditions of a linear optimal power flow (OPF) formulation. The controller relies on local power and frequency measurements, information from neighboring DGs, and line-flow measurements transmitted through a communications network. Extensive simulations show a good performance of the controller against sudden changes in the load, congested lines and availability of DGs in the microgrid, and the ability to successfully drive the system to an optimal economic operation. [ABSTRACT FROM AUTHOR]

In this paper, we present new distributed controllers for secondary frequency and voltage control in islanded microgrids. Inspired by techniques from cooperative control, the proposed controllers use localized information and nearest-neighbor communication to collectively perform secondary control actions. The frequency controller rapidly regulates the microgrid frequency to its nominal value while maintaining active power sharing among the distributed generators. Tuning of the voltage controller provides a simple and intuitive tradeoff between the conflicting goals of voltage regulation and reactive power sharing. Our designs require no knowledge of the microgrid topology, impedances, or loads. The distributed architecture allows for flexibility and redundancy, eliminating the need for a central microgrid controller. We provide a voltage stability analysis and present extensive experimental results validating our designs, verifying robust performance under communication failure and during plug-and-play operation. [ABSTRACT FROM PUBLISHER]

This brief examines the behavior of DC circuits comprised of resistively interconnected constant-power devices (CPDs), as may arise in dc microgrids containing microsources and constant-power loads. We derive a sufficient condition for all operating points of the circuit to lie in a desirable set, where the average nodal voltage level is high, and nodal voltages are tightly clustered near one another. Our condition has the elegant physical interpretation that the ratio of resistive losses to total injected power should be small compared with a measure of network heterogeneity, as quantified by a ratio of conductance matrix eigenvalues. Perhaps surprisingly, the interplay between the circuit topology, branch conductances, and CPDs implicitly defines a nominal voltage level for the circuit, despite the explicit absence of voltage-regulated nodes. [ABSTRACT FROM PUBLISHER]

This paper presents the development, implementation, and commissioning of two different Energy Management Systems (EMSs) for the Canadian Renewable Energy Laboratory (CANREL), a microgrid testbed located in Guelph, ON, Canada, for the existing hardware, software, and communication infrastructure, which constrained the implementation options. A Rule-based EMS (RBEMS), which is typically found in microgrid controllers nowadays, and an implementation of an Optimization-based EMS (OBEMS), which is not usual in today's controllers, are proposed, tested, and demonstrated in the microgrid testbed. The RBEMS consists of a state machine that represents the commitment of different genset units in the system and the curtailment of load and renewable generation. The OBEMS is based on a unit commitment model for microgrids that minimizes the generation and curtailment costs, while operating the microgrid equipment according to technical limits. Both EMS systems are integrated into a Python application which integrates various open-source packages and solvers, making it affordable, flexible and easy to replicate and upgrade. The successful implementation and performance of the EMS is discussed, showing that the components of the microgrid follow the dispatch commands, with the OBEMS yielding better overall results than the RBEMS, as expected, using the existing communications links and maintaining the stability of the microgrid. • Two EMS algorithms were implemented and tested in a microgrid testbed. • The algorithms were coded using open-source programming languages and solvers. • The optimization-based EMS showed a better performance in terms of unitary energy costs. • The EMS tests exhibited typical issues in microgrid operation. [ABSTRACT FROM AUTHOR]