Search

Carbon xerogels (CXs) were synthesized by polycondensation of resorcinol and formaldehyde, followed by thermal annealing, and subjected to hydrothermal oxidation. Solid-phase extraction (SPE) cartridges were filled with CXs and tested for extraction of metaflumizone and other seven environmental micropollutants (acetamiprid, atrazine, isoproturon, methiocarb, carbamazepine, diclofenac, and perfluorooctanesulfonic acid) before chromatographic analysis. The recoveries obtained with the pristine CX were low for most analytes, except for metaflumizone (69 ± 5%). Moreover, it was concluded that the adsorption/desorption process of the micropollutants performed better on CXs with a less acidic surface (i.e., pristine CX). Thus, cartridges were prepared with pristine CX and multi-walled carbon nanotubes (MWCNTs) in a multi-layer configuration. This reusable cartridge was able to simultaneously extract the eight micropollutants and was used to validate an analytical methodology based on SPE followed by ultra-high performance liquid chromatography-tandem mass spectrometry. A widespread occurrence of 6/8 target compounds was observed in surface water collected in rivers supplying three drinking water treatment plants and in the resulting drinking water at the endpoint of each distribution system. Therefore, the first study employing CXs and MWCNTs as sorbent in multi-layer SPE cartridges is herein reported as a proof of concept for determination of multi-class water micropollutants. [ABSTRACT FROM AUTHOR]

The fate and removal of organic micropollutants in the environment is a demanding issue evidenced by the recent European policy. This work presents an analytical method for the trace quantification of 37 micropollutants including Priority Substances (Directive 2013/39/EU), substances of the recent watch list (Decision 2015/495/EU) and contaminants of emerging concern: pesticides, multi-class pharmaceuticals and a metabolite, estrogens and one industrial compound. The analytical method was based on solid phase extraction (SPE) followed by ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC–MS/MS), using eco-friendly solvents (ethanol and ultrapure water) both in the SPE and UHPLC, according to green analytical chemistry principles. Briefly, Oasis ® HLB cartridges were used to preconcentrate 100 mL of water samples and the reconstituted extracts were analyzed with a Kinetex™ column under reversed mode, the linear ranges extended to 200 ng L −1 ( R 2 > 0.99) for all the analytes. The method detection limits were between 0.04 and 2.26 ng L −1 and the method quantification limits were between 0.13 and 6.85 ng L −1 . The identity of the compounds was confirmed using two MS/MS transitions and its ion ratios, according to Decision 2002/657/EC. The validated method was applied to wastewater treatment plant samples, assessing the concentration of micropollutants after secondary biological and tertiary UV treatments. Lab-scale photolysis and ozonation experiments were also performed with the secondary effluents, with ozonation showing the best performance for the removal of most of the determined micropollutants. [ABSTRACT FROM AUTHOR]

Numerous contaminants of emerging concern (CECs) have been found in different water bodies. Directive 2013/39/EU and Decision 2018/840/EU are consequently being implemented in the field of water policies. Twelve CECs (e.g., isoproturon, ciprofloxacin, and clarithromycin are among those listed) were detected in a municipal wastewater secondary effluent by means of solid phase extraction and ultra-high-performance liquid chromatography with tandem mass spectrometry (SPE-UHPLC-MS/MS). Different advanced oxidation processes (AOPs), based on the combination of ozone, UVA-LED and powdered TiO2, were investigated for their removal in a semi-batch operation. In addition, TiO2-coated glass rings (P25R) were characterized with different techniques (SEM, WDXRF) and used for continuous mode operation in a packed bed reactor (PBR). Among the AOPs studied, ozone-based processes were found to be more efficient than heterogeneous photocatalysis. A kinetic study was performed showing that direct ozonation is the main oxidation pathway for CEC removal. Ozone was successfully decomposed in combination with UVA-LED and P25R, resulting in an apparent rate constant of 3.2 × 10−2 s−1 higher than in the O3/LED system (1.0 × 10−3 s−1) or with ozone alone (8.6 × 10−5 s−1). Hydroxyl radical reaction could prevail over direct ozone reaction for the most refractory compounds (e.g., isoproturon). [ABSTRACT FROM AUTHOR]