Search

Aseptic loosening from implant-associated osteolysis in reverse shoulder arthroplasty (RSA) may contribute to premature implant failure. Although articular side polyethylene (PE) damage has been well documented in the literature, no studies to date have investigated backside wear in RSA. The aims of this investigation were to (1) document and compare the damage between the backside and articular surface in explanted RSA components, (2) assess whether certain quadrants have a greater propensity for damage, and (3) report the most common mode(s) of backside PE damage.Twenty-one RSA humeral liners retrieved during revision procedures between 2005 and 2014 were included for analysis. The mean time between implantation and extraction was 16 months (10 days-88 months). Diagnoses at the time of revision included dislocation (10), infection (4), mechanical failure (3), loosening (2), and unknown (2). Liners were examined under light microscopy (×10-30 magnification) and damage on the articular and backside of the liner surface was graded using the modified Hood score. The location and damage modality were compared between the articular side and backside of the implant.Damage was noted on the articular surfaces of all 21 liners and on the backside surface of 20 liners. The total damage in all the quadrants was higher on the articular surface than on the backside of the component, with a mean difference in total quadrant damage scores of 11.74 ± 3.53 (P.001). There was no difference in damage among the quadrants on the backside (P = .44) or the articular surface (P = .08). The articular side exhibited greater scratching, abrasion, and surface deformation than the backside (P.001).This short-term retrieval study demonstrated that backside PE damage occurs on the humeral component of RSA implants. There was greater damage to the articular side of the liner but wear to the backside was present in almost all liners. The clinical importance of backside wear in RSA and its overall contribution to PE particulate disease and osteolysis needs further investigation.

The aim of this study was to compare the closed reduction interfragmentary pinning method (IPM) with the extension block technique (EBT) for bony mallet finger. Patients who underwent mallet finger operations were screened retrospectively for the following inclusion criteria: Doyle type 4c, age between 18 and 75 years, less than 4 weeks to surgery, and more than 1 year of follow-up time. Group I underwent a closed reduction IPM, and group II underwent the EBT. Lateral radiographs taken during the preoperative and final examination were used to evaluate the size and amount of displacement from the distal interphalangeal (DIP) joint and the dorsal fragment as well as the articular surface. Operation times were compiled from patient records. During the final examination, pain and DIP joint range of motion (ROM) were assessed and complications were recorded. The Crawford criteria were used for functional results. Fifteen patients in group I (8 men, 7 women) and 17 patients in group II (10 men, 7 women) were evaluated. Age, gender, time to surgery and follow-up time showed no statistically significant differences between the two groups. The differences in fragment size, preoperative and postoperative joint displacement, amount of dorsal displacement and DIP joint ROM were not statistically significant between the two groups. However, the operation time was significantly shorter time in group I than in group II (p=0.000). The average time to fracture union was significantly longer in group I (7.3 weeks) than in group II (6 weeks) (p=0.013). The EBT has faster time to union and is a safer method with lesser risk of arthritis and fragmentation. The IPM can be an alternative with shorter operation time, less pin bed infection and nail bed damage, especially in Doyle type 4c cases with large fragments.

Polyvinyl alcohol hydrogel synthetic cartilage implants are increasingly used to treat advanced Freiberg disease. We report a case with recurrence of symptoms within 6 weeks and required revision for fracture of the implant. We describe a revision technique with modified osteochondral bone graft to deal with the variables of revision surgery namely: the bone loss, collateral ligament insufficiency, and changes to the proximal phalanx articular surface. We describe a postoperative plan, recovery and a good outcome achieved in 12 month follow-up.

Femoral head chondroblastoma poses a surgical challenge. Anatomical limitations may lead to increased risk of local recurrence, damage to the articular cartilage, growth disturbances, and/or avascular necrosis (AVN). We are presenting our results with surgical hip dislocation approach with the aim to evaluate its efficacy in preventing recurrence and its safety, preserving a functional hip joint and avoiding complications. Ten patients were managed using surgical hip dislocation with direct access to femoral head lesions, extended curettage through a modified trapdoor approach, and cement reconstruction. These were six males and four females, with a mean age of 17 ± 2.7 years (range: 14–20) and a mean follow-up of 34 ± 12 months (range: 17–57). The lesion extended into the neck in 60% of patients with the physis being either closed in seven or closing in three patients. We had a single case (10%) of recurrence at the trochanters for which re-curettage was done. However, all patients had their hips preserved with good function at the latest follow-up, and no serious complications recorded. The Musculoskeletal Tumor Society score improved significantly from a pre-operative median of 23.5 (range: 16–28) to a post-operative median of 29 (range: 26–30) (P = 0.005). This report describes a safe reproducible approach to effectively manage these locally aggressive lesions with good short-term results. This is done while maintaining the integrity of the articular surface, growth plate, as well as preserving the femoral head blood supply.

Background Extended curettage has increasingly become the preferred treatment for giant cell tumour of bone (GCTB), but the high recurrence rate after curettage poses a major challenge for orthopaedic surgeons. Computed tomography (CT) is valuable in the evaluation of GCTB. Our aim was to identify specific features of GCTB around the knee in pre-operative CT images that might have prognostic value for local recurrence. Methods We retrospectively analyzed data from 124 patients with primary GCTB around the knee who underwent extended curettage from 2010 through 2019. We collected demographic, clinical, and therapeutic data along with several CT-derived tumour characteristics. CT-derived tumor characteristics included tumour size, the distance between the tumour edge and articular surface (DTA), and destruction of posterior cortical bone (DPC). Akaike information criterion (AIC) was used to select which variables to enter into multivariate logistic regression models and to determine significant factors affecting recurrence. Results The total recurrence rate was 21.0% (26/124), and the average follow-up time was 69.5 ± 31.2 months (24–127 months). Age, DTA ( Conclusion Identifying certain features of GCTB around the knee on CT has prognostic value for patients treated with extended curettage. A three-factor model predicts tumour recurrence well after extended curettage.

Background Previous studies have shown a wide range of anatomical classifications of the subtalar joint (STJ) in the population and this is related to the different force line structures of the foot. Different subtalar articular surface morphology may affect the occurrence and development of flat foot deformity, and there are fewer studies in this area. The main objective of our study was to determine the association of different subtalar articular surface with the occurrence and severity of flat foot deformity. Methods We analyzed the imaging data of 289 cases of STJ. The articular surface area, Gissane’s angle and Bohler’s angle of subtalar articular surface of different types were counted. The occurrence and severity of flat foot deformity in different subtalar articular surface were judged by measuring the Meary angle of foot. Results We classified 289 cases of subtalar articular surface into five types according to the morphology. According to Meary angle, the flat foot deformity of Type I and Type IV are significantly severer than Type II (P ). Type II (7.65 ± 1.38 cm2) was significantly smaller than Type I (8.40 ± 1.79 cm2) in the total joint facet area(P ). Type III (9.15 ± 1.92 cm2) was smaller than Type I (8.40 ± 1.79 cm2), II (7.65 ± 1.38 cm2) and IV (7.81 ± 1.74 cm2) (P ). Type II (28.81 ± 7.44∘) was significantly smaller than Type I (30.80 ± 4.61 degrees), and IV (32.25 ± 5.02 degrees) in the Bohler’s angle (P ). Type II (128.49 ± 6.74 degrees) was smaller than Type I (131.58 ± 7.32 degrees), and IV (131.94 ± 5.80 degrees) in the Gissane’s angle (P ). Conclusions After being compared and analyzed the measurement of morphological parameters, joint facet area and fusion of subtalar articular surface were closely related to the severity of flat foot deformity and Type I and IV were more likely to develop severer flat foot deformity. Level of evidence Level III, retrospective comparative study.

The purpose of this cadaveric study is to assess the talar articular surface visible through a modified posterior medial approach to the ankle joint for talar osteochondral defects. Ten fresh frozen cadaveric specimens were included. The talar surface area was outlined utilizing a marker. The talus was removed to measure the medial to lateral length and posterior to anterior length using a flexible ruler. A skin incision was made posterior to the medial malleolus. The incision was deepened through the flexor retinaculum. Dissection was carried between the posterior tibial and flexor digitorum longus tendons through the posterior tibial tendon sheath in order to access the posteromedial ankle joint. The posterior tibiofibular ligament should remain intact. A Hintermann distractor was then inserted to distract the ankle joint. The average articular cartilage visible from medial to lateral was 1.90 (68.6%) centimeters, while from posterior to anterior was 2.00 (43.6%) centimeters. Medial malleolar osteotomy is often required to visualize posteromedial talar osteochondral defects that are difficult to visualize with standard anterior ankle arthroscopy. Our study suggests that the modified posteromedial approach between the posterior tibial and flexor digitorum longus tendons and utilizing a Hintermann distractor allows for visualization of common posterior and central-medial lesions. When considering the anatomic 9-zone grid scheme proposed by Raikin et al, zone 4, 7, and 8 lesions can be assessed with this approach. A clinical study should be undertaken to evaluate the morbidity of this approach.

The menisci of the knee are accurately evaluated by MRI. Knowledge of normal anatomy, imaging parameters, imaging appearance of the normal and torn meniscus, and common anatomic variants and pitfalls are essential in obtaining the correct imaging diagnosis. There are multiple imaging signs of meniscal tear, including linear signal intensity extending to an articular surface on at least 2 images, altered meniscal shape, displaced meniscal flap, ghost meniscus, meniscal extrusion, and parameniscal cyst. After surgery, granulation tissue may mimic tear. Diagnosis is improved by comparison to preoperative images, operative note, and intra-articular contrast administration.

We performed a retrospective review of standard anteroposterior and lateral radiographs of the thumb in 80 patients, to compare two radiographic landmarks, in terms of mediolateral bone support, for centering the trapezial component in total joint arthroplasty. On anteroposterior view, we identified the distal articular surface of the trapezium and trapezium width, and defined the two midpoints as radiographic landmarks for positioning a 9-mm trapezial cup. Mean trapezium width was significantly greater than the distal articular surface of the trapezium, and the midpoints did not match. Thus, after positioning simulated 9-mm prosthetic cups centered on each landmark, the residual radial bone distance was significantly greater using the landmark based on trapezium width. The mean value was 33% greater with this landmark, and the minimum value was 2.1 mm, compared to 0.2 mm using the landmark based on the distal articular surface. Our study thus suggested that the midpoint of the trapezium width is the more relevant radiographic landmark for centering the trapezial prosthetic cup in total joint arthroplasty, by preserving better bone stock on the radial side without depleting the ulnar side. On an intraoperative anteroposterior fluoroscopic view, this landmark could be used to check cup positioning. Nous avons effectué une revue rétrospective de radiographies standards de face et de profil du pouce chez 80 patients, afin de comparer deux repères radiographiques et d'identifier la solution la plus cohérente, d'un point de vue du support osseux médio-latéral, pour le centrage la cupule trapézienne dans l'arthroplastie totale trapézo-métacarpienne. Sur les radiographies de face, nous avons identifié la surface articulaire distale du trapèze et la largeur du trapèze. Ensuite, nous avons défini deux repères radiographiques au milieu de ces longueurs pour le positionnement d'une cupule trapézienne de 9 mm. La largeur du trapèze avait une valeur moyenne significativement plus élevée que la surface articulaire distale du trapèze, et leurs milieux ne correspondaient pas. Ainsi, après positionnement des cupules prothétiques simulées avec un diamètre de 9 mm centré sur chaque repère, la distance osseuse résiduelle radiale était significativement plus élevée en utilisant le repère basé sur la largeur du trapèze. La valeur moyenne était 33% plus élevée avec ce repère radiographique et sa valeur minimale était de 2.1 mm alors qu'elle était de 0.2 mm en utilisant le repère basé sur la surface articulaire distale. Notre étude suggère que le milieu de la largeur du trapèze est le repère radiographique le plus cohérent pour centrer la cupule prothétique trapézienne dans l'arthroplastie totale trapézo-métacarpienne, en préservant un meilleur stock osseux du côté radial sans épuiser le côté ulnaire. En effectuant une vue peropératoire de face avec la fluoroscopie, ce repère pourrait être utilisé pour vérifier le bon positionnement de la cupule.

Introduction An increasing number of ankle injuries with osteochondral lesions (OCL) also include lesions of the distal tibia. Therefore, the German Cartilage Society database is used to describe and examine the characteristics of these lesions and, early on, the results of different surgical therapies on the clinical outcome. Materials and methods Forty-seven patients out of 844 registered in the German Cartilage Society database met the inclusion criteria showing an OCL of the distal tibia (OLDT). Sixteen of them also presented a 1-year follow-up regarding the Foot and Ankle Ability Measure (FAAM). Further evaluations were included in the follow-up, such as the Foot and Ankle Outcome Score (FAOS) and the Visual Analogue Scale for pain (VAS). Results The patients' mean age was 35 ± 11 with a mean BMI in the range of overweight (26/27 ± 5 kg/m2). The lesions were equally distributed on the articular surface of the distal tibia. Most patients were operated using anterior ankle arthroscopy [nT 34 (72%); nS 13 (81%)], while some (nT 9; nS 4) converted to open procedures. Almost 90% staged III and IV in the ICRS classification. Debridement, bone marrow stimulation, solid scaffolds, and liquid filler were the treatment choices among the subgroup. All therapies led to a clinical improvement between pre-op and 1-year follow-up but not to a significant level. Conclusion This study presents baseline data of OLDT based on data from a large database. BMS and scaffolds were the treatment of choice but did not present significant improvement after a 1-year follow-up.

The present study was performed to evaluate the effects of the medial and anterolateral approach combined with internal fixation by double head compression screws and countersunk K-wires for Hawkins Ⅲ talus neck and medial malleolus fracture. Eleven patients with articular surface crush injury resulting in Hawkins Ⅲ talus neck fractures accompanied by medial malleolus fractures were reviewed. All patients underwent emergency operations. The fractures were fixed using double head compression screws and countersunk K-wires through combined medial and anterolateral approaches. FAOS, AOFAS ankle-hindfoot scale, and VAS questionnaire scores were recorded. In addition, ROM of the ankle and postoperative complications were assessed. All patients were followed up for a median of 52.45 ± 5.15 months. The multiple scales data of FAOS on the affected side were: pain score 89.14 ± 7.08; activities of daily living score 89.57 ± 8.88; quality-of-life score 89.20 ± 7.44; sports score 75.00 ± 15.49; and other symptoms score 84.74 ± 7.51. The mean overall AOFAS ankle-hindfoot score was 88.36 ± 6.39. The VAS score was 0.72 ± 0.65. Ankle motion included dorsiflexion (13.18° ± 9.02°) and plantar flexion (32.27° ± 12.34°). Subtalar joint motion included eversion (10.91° ± 7.01°) and inversion (11.36° ± 7.45°). All scores of the healthy side were higher than those of the affected side (p .05). In addition to ROM of the ankle and subtalar joint and sports score, various indicators of recovery rate had scores 80%. One patient developed skin necrosis, which healed after debridement and wound dressing. Late complications included subtalar and/or ankle traumatic arthritis in six patients, four of whom showed no obvious clinical symptoms. In conclusion, the method of emergency surgery and medial and anterolateral approach combined with countersunk K-wires to fix small bone fragments to restore the integrity of the articular surface is acceptable for Hawkins Ⅲ talus neck with medial malleolus fracture.

Posterior malleolar fractures are often part of complex ankle fracture patterns. Radiographs and computed tomography are often obtained in the preoperative setting. In this study, we compared measurements from lateral ankle radiographs with measurements on axial computed tomography. We hypothesize that there is an association between measurements taken on lateral XR and certain fracture morphology such as medial extension and that measurements taken on lateral XR can be used to predict likelihood of medial extension type fractures. A multi-center retrospective analysis was performed involving patients with trimalleolar ankle fractures treated at two large urban healthcare systems ranging from January 1, 2010 to November 1, 2019. A total of 279 patients met criteria including 186 females and 93 males aged 18 to 90 with an average age 55. Four reviewers measured continuous variables on lateral radiograph and axial computed tomography: posterior malleolus fracture height, articular surface length, medial-lateral width, and anterior-posterior depth and then agreement was assessed via intraclass correlation coefficient. Pearson correlations were calculated for all pairwise combinations of measurements. Two fracture classification systems were then evaluated for association with the continuous variables. Lateral height was divided into quartiles and analyzed for the degree of association. Positive correlation was found between lateral height and axial depth/axial width. Taller lateral height values were statistically associated with medial extension type fractures. Lateral height 24.5mm-29.5mm is 3.1x higher, and lateral height29.5mm is 8.6x more likely to have medial extension when compared to shorter lateral heights(20.5mm). Based on these findings we suggest increased usage of pre-operative CT and evaluation for the use of posteromedial approaches in the setting of taller lateral height fracture patterns(24.5mm) as seen on lateral XR.

OBJECTIVES To identify the incidence of distal articular fractures in a series of distal third tibia shaft fractures and to report the utility of both computed tomography (CT) scans and Radiographic Investigation of the Distal Extension of Fractures into the Articular Surface of the Tibia (RIDEFAST) ratios for identification of articular involvement. DESIGN Retrospective cohort. SETTING Level 1 trauma center. PATIENTS Four hundred seventeen patients with distal third tibia shaft fractures were included in the study. INTERVENTION Intramedullary nail or plate fixation. MAIN OUTCOME MEASURES Type of articular fracture, time of diagnosis, and RIDEFAST ratios. RESULTS One hundred one of the 417 distal third fractures (24%) had a fracture of the distal tibia articular surface. Of these 101 fractures, 41 (41%) represented an extension of the primary fracture line and 60 (59%) were separate malleolar fractures. Of the 101 articular fractures, 95 (94%) were identified preoperatively and 6 (6%) were identified intraoperatively. Of the 95 fractures identified preoperatively, 87 (92%) were identified on plain radiographs and 8 (8%) by CT scan. Thirty-five preoperative CT scans were performed on distal third tibia shaft fractures in search of an intra-articular fracture. In 27 patients (77%), no articular fracture was present, representing an overall yield of 23% among CT scans performed to rule out an articular fracture in distal third tibia shaft fractures. RIDEFAST ratios for all 101 distal tibia shaft fractures with articular involvement and 100 fractures with no articular involvement were not significantly different (P > 0.05) using both coronal and sagittal plane measurements. CONCLUSIONS CT scans performed on distal third tibia shaft fractures in search of articular fractures had a low yield (23%). Widespread use of CT scan to diagnose fractures of the distal tibia articular surface in the setting of distal tibia shaft fractures does not seem warranted. No statistically significant differences in RIDEFAST ratios were found between fractures with and without articular involvement, indicating that more work is necessary before RIDEFAST can be used to reliably rule out articular involvement in this setting. LEVEL OF EVIDENCE Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Background This study examined a cohort of retrieved rotating hinge (RH) total knee arthroplasty implants of four different designs with emphasis on the surface damage observed on the polyethylene components. Our purpose was to determine if differences in polyethylene damage existed among the designs, and if those differences could be explained by differences in design characteristics. Materials and Methods Seventy-two RH implants from four manufacturers (DePuy LPS/SROM, Zimmer NexGen, Stryker Howmedica MRH, and Biomet Finn-OSS) removed at the time of revision performed between 2002 and 2017 were identified in our institutional retrieval registry. Damage to the surfaces of the polyethylene was assessed using a subjective grading system and evaluated in multiple zones. Design characteristics that were evaluated included the following: location of the dwell point on the polyethylene component, posterior position of the axle, and amount of hyperextension and rotation allowed by the implant. Results There were no differences in total damage scores between the four implant groups (P = .45). The Stryker Howmedica MRH group showed the least backside wear of all implants but significantly more articular-sided wear compared with two of the other three groups. All implants except NexGen showed increased total damage scores in implants revised for mechanical (vs nonmechanical) reasons and in implants with a longer duration of implantation. Conclusion No single implant design emerged as superior in terms of minimizing polyethylene wear damage. Polyethylene damage existed in various locations but was not different in severity across designs, suggesting that there is no clear superior RH design that minimizes overall articular surface wear compared with other designs.

Purpose Development and validation of an animal model of labral healing would facilitate translation of novel surgical and biological strategies to improve glenolabral healing. The purpose of this study was to characterize the anatomic and histological properties of the shoulder labrum in rat, rabbit, dog, pig, goat, and humans. Given the demonstrated similarities in size and structural morphology in other joints, it was hypothesized that the goat glenoid with surrounding capsulolabral complex would most closely resemble that of humans in terms of dimensions and structure, as observed grossly and histologically. Methods Cadaveric glenohumeral joints from rats (n = 8), New Zealand white rabbits (n = 13), Mongrel dogs (n = 9), Spanish goats (n = 10), Yorkshire pigs (n = 10), and humans (n = 9) were freshly harvested. Photographs were taken of the glenoid with its surrounding capsulolabral complex. Linear dimensions of the glenoid articular surface were measured. It was determined where the capsulolabral complex was continuous with, or recessed from, the articular glenoid surface. The glenoid was divided into 6 equal segments radiating out toward 12, 2, 4, 6, 8, and 10 o’clock positions. Samples were sectioned and stained with Safranin O/Fast green and Mallory Trichrome. Insertion of the capsulolabral tissue onto the glenoid was qualitatively assessed and compared with gross morphology. Results Dimensions of the goat glenoid most closely paralleled dimensions of the human glenoid. A capsulolabral complex was continuous with the glenoid surface from ~ 9 to 12 o’clock in the rats, 7 to 12 o’clock in rabbits, 5 to 12 o’clock in the dogs, and 9 to 12 o’clock in goats, 6 to 12 o’clock in pigs, and 2 to 8 o’clock in humans. In contrast to humans, no other species demonstrated an organized fibrocartilaginous labrum either macroscopically or histologically. Conclusion The animals in the present study did not possess a discrete fibrocartilaginous labrum by gross or histological evaluation, as directly compared to humans. While models using these animals may be acceptable for examining other shoulder pathologies, they are not adequate to evaluate labral pathology. Level of evidence Basic Science Study; Anatomy and Histology; Cadaveric Animal Model.

Background Osteochondritis dissecans (OCD) is an idiopathic disorder of subchondral bone that causes focal articular cartilage disruption with the potential long-term consequence of premature osteoarthritis. Glenoid OCD is exceedingly rare. This case series aims to identify the grades of glenoid OCD and report its grade-specific treatment with clinical, radiological, and functional outcomes. Methods Prospectively collected data of consecutive patients diagnosed with a symptomatic glenoid OCD, who had a minimum 2-year follow-up, following nonoperative or surgical treatment, was retrospectively analyzed. Osteochondral defects secondary to acute trauma, instability, and primary osteoarthritis were excluded. Pretreatment and posttreatment clinical, radiological, and sports participation data were collected. This included pretreatment MRI for grading of glenoid OCD according to the International Cartilage Research Society (ICRS) OCD staging system, and postoperative MRI for grading of articular cartilage repair using the MOCART (MRI observation of cartilage repair tissue) scoring system. Results The study identified 7 competitive overhead athletes with symptomatic unilateral glenoid OCD, with a post-treatment minimum 2-year follow-up. Of 4 patients with ICRS OCD I, 3 healed with nonoperative treatment, whereas 1 progressed to ICRS OCD II. This patient along with another 3 patients with unstable glenoid OCD underwent arthroscopic OCD excision with bone marrow stimulation cartilage repair. All patients improved following treatment and had full passive and active range of shoulder movements, with normal strength and stability at the 2- year follow-up. The mean MOCART score on MRI at 2 years for the 4 patients who underwent surgery was 82.5 (range, 75-90). MRI documented healing in all 3 patients with ICRS OCD I who underwent nonoperative treatment. All patients returned to the same or higher level of sport following treatment, with mean time to return to sports being 8.0 months (range, 6-11 months) for nonoperative treatment, and 6.8 months (range, 5-10 months) for operative treatment. This difference was not statistically significant (P value .55). No patient had recurrence of symptoms till latest follow-up. Conclusion Despite the glenoid being a concave non–weight-bearing articular surface, OCD at this site has pathological grades similar to other convex weight-bearing articular surfaces. Notwithstanding the limited number of cases, it would appear that ICRS OCD I can often be successfully treated with nonoperative treatment, whereas ICRS OCD II, III, IV, warrant operative treatment. Bone marrow stimulation is a safe and predictable option for glenoid OCD cartilage repair and allows athletes a quick and successful return to sports.

Bony alignment is the primary goal in foot and ankle reconstruction of the cavovarus foot. This condition presents as a malalignment causing a medial overload of the ankle articular surface and lateral overload of the hindfoot, midfoot, and forefoot. A painful gait associated with articular degeneration of the numerous joints can lead to a chronic and rigid arthrosis of joints, warranting arthrodesis of the affected joints accordingly.

Glenoid loosening is a common failure mechanism of anatomic total shoulder arthroplasty (TSA). New hybrid fixation glenoids allow bony ingrowth and decrease the rates of glenoid loosening. The purpose of this study is to describe a new failure mode of polyethylene dissociation from the ingrowth cage in a single implant design. A retrospective review was performed using an institutional shoulder arthroplasty database of a single hybrid cage glenoid (Exactech, Gainesville, FL). Implants demonstrating this failure mechanism were investigated. Five out of 206 (2.4%) primary TSAs with cage glenoids performed at our institution and 2 referred for revision suffered glenoid articular face failure. Mean age was 57 (range 38–67 years). Two of 7 failures (29%) occurred secondary to trauma. Failure occurred at mean 14 months after index arthroplasty (range 0–30 months). Revision occurred at mean 24 months after index arthroplasty (range 6–39 months). Six of the 7 patients (86%) had posteriorly augmented glenoids. All 6 patients who had available pre-failure radiographs demonstrated off-axis deviation between the peripheral pegs and central cage (mean 4.8°, range 3°–6°), which may predispose the implant to failure by pre-stressing the material interface. Failure between the glenoid articular face and the central ingrowth cage is a unique failure mechanism to modular hybrid ingrowth glenoids. We hypothesize that this is predisposed by off-axis drilling leading to pre-stressing of the material interface. Surgeons should be aware of the existence of this failure mechanism, particularly when seeing patients with acute pain after an otherwise unproblematic TSA.

Background The coronoid process plays a vital role in preserving elbow stability. In cases of acute or chronic deficiency of the coronoid process, reconstruction is warranted to restore stability and to avoid early joint degeneration. The distal clavicle might be a useful osteochondral autograft for coronoid reconstruction with low donor-site morbidity. This study evaluated the fitting accuracy of the distal clavicle as an autograft for coronoid process reconstruction. Methods One hundred upper-extremity computed tomography scans of 85 body donors were available for this study (mean age, 69 ± 17 years; 46 male and 39 female donors; 15 bilateral specimens). Standardized 40% transverse defects of the coronoid process were digitally created; the distal clavicles were digitally harvested and placed onto the defects by a best-fit technique in 2 different orientations using commercially available software: (1) with the superior aspect of the articular surface of the graft oriented toward the coronoid tip and (2) with the inferior aspect of the articular surface of the graft oriented toward the coronoid tip. The fitting accuracy of the grafts to the native coronoid process was evaluated from lateral to medial using custom code. Results Regardless of the orientation of the graft, the distal clavicle provided a good fit in the central portion of the coronoid process. In the lateral and medial aspects of the defect, however, the fitting accuracy of the graft declined significantly (P ≤ .044). No significant differences were observed between ipsilateral and contralateral grafts (P ≥ .199). The intrarater reliability was excellent. Conclusion The results of this study suggest that a distal clavicle autograft may be suitable to replace a transverse defect of the coronoid process; however, it may not fully reconstruct the anteromedial and anterolateral aspects of the coronoid.

Wrist arthroscopy in the setting of distal radius fractures allows for direct visualization of the articular surface and treatment of associated soft tissue injuries. Arthroscopic techniques may be used to fine tune reductions with residual articular step-off or gap after an initial reduction attempt and are critical for addressing free articular fragments and die-punch lesions. Surgeon training, experience, and comfort with wrist arthroscopy remains a barrier to widespread adoption of this technique. Level I studies are needed to investigate whether improved articular reduction leads to meaningful clinical differences.

STUDY DESIGN A retrospective comparative study with radiographic measurements. OBJECTIVE The aim of this study was to investigate incidences and risk factors of screw-related superior facet articular surface violation (FASV) and optimal pedicle screw angles (PSAs) to avoid FASV at L4 and L5 levels in transforaminal lumbar interbody fusion (TLIF) with either open surgery (OS) or minimal invasive (MIS) techniques with 3D C-arm navigation. SUMMARY OF BACKGROUND DATA L4 to S1 are common levels in TLIF. Adjacent segment diseases (ASD) following TLIF is not uncommon. Screw-related FASV at the superior level is one of the potential risk factors for ASD. METHODS In the OS and MIS groups, 111 and 110 screws were included at L4 level, and 114 and 110 screws at L5 level, respectively. Postoperative computed tomography examined screw-related FASV at L3-4 and L4-5 facet levels. The entry point was the location where pedicle screws placed into the facet joints. RESULTS The OS technique and insertion at the L5 level increased the likelihood of FASV 2.56 and 1.81 times, respec-tively. Multivariate logistic regressions analysis determined PSA was a significant factor associated with FASV. Pearson r between PSA and the distance between midline and entry point was 0.905 (P

Background:The effect of high tibial osteotomy (HTO) on the stress distribution across the knee joint is not completely understood. Subchondral bone density is considered to reflect the pattern of stress distribution across a joint surface.Purpose:To assess the distribution of subchondral bone density across the proximal tibia in nonarthritic knees and in the knees of patients with osteoarthritis (OA) before and after HTO.Study Design:Cohort study; Level of evidence, 3.Methods:We retrospectively collected radiological and computed tomography data from 16 patients without OA (control group) and 17 patients with OA. Data from the OA group were collected before and 1.5 years after HTO. Subchondral bone density of the proximal tibia was assessed with computed tomography–osteoabsorptiometry. The locations and percentages represented by high-density areas (HDAs) on the articular surface were quantitatively analyzed.Results:The ratio of the HDA of the medial compartment to the total HDA (medial ratio) was significantly higher in the preoperative OA group (mean, 80.1%) than in the control group (61.3%) ( P < .001). After HTO, the medial ratio decreased significantly to 75.1% ( P = .035 in comparison with preoperative values) and was significantly correlated with the hip-knee-ankle angle in both groups: control ( r = −0.551; P = .033) and OA ( r = −0.528; P = .043). The change in medial ratio after HTO was significantly correlated with the change in hip-knee-ankle angle ( r = 0.587; P = .035). In the medial compartment, the HDA in the most lateral region of 4 subregions increased after HTO, but that in 3 medial subregions decreased.Conclusion:In this exploratory study, HTO shifted the HDA of the medial compartment of the proximal tibial articular surface toward the lateral compartment. In contrast, the HDA of the most lateral region of the medial compartment increased after HTO. This change in subchondral bone density may result from the change in stress distribution.

Purpose (1) to improve the comprehension of the topographical position of the talar dome beneath the inferior articular surface of the tibia and, (2) to illustrate the changes of possible access to the articular surface of the talar dome during arthroscopic treatment of talar osteochondral defects in an anatomical model. Methods Twenty matched pairs (n = 40) of anatomical ankle specimen were used. All specimens were mounted in a standardized fashion, 3-dimensional radiography was performed in 4 defined positions (maximum dorsiflexion, neutral position, noninvasive distraction, and maximum plantarflexion). All radiographs were analyzed and statistically compared. Results Anterior accessibility was highest in maximum plantarflexion (medial: 49.20 ± 9.86%, lateral: 48.19 ± 8.85%), followed by non-invasive distraction (medial: 33.60 ± 7.96%, lateral: 31.98 ± 8.30%). Neutral position (medial: 19.34 ± 6.90%, lateral: 17.54 ± 6.63%) and dorsiflexion (medial: 15.36 ± 5.03%, lateral: 13.88 ± 4.33%) were not able to significantly increase accessibility. Posterior accessibility was greatest in maximum dorsiflexion (medial: 56.69 ± 9.65%, lateral: 46.82 ± 8.36%), followed by neutral position of the ankle joint (medial: 40.95 ± 8.28%, lateral: 31.06 ± 6.92%). Noninvasive distraction (medial: 31.41 ± 8.18%, lateral: 22.99 ± 7.63%) was still significantly better than plantarflexion (medial: 14.54 ± 5.10%, lateral: 13.89 ± 3.14%) and slightly increased accessibility to the talar dome. Medially, a central area of 5.89 ± 9.76% was accessible by maximum plantarflexion and maximum dorsiflexion from anterior and posterior, respectively, laterally a central blind spot of 4.99 ± 8.61% was detected. Conclusions From an anatomical point of view, maximum joint positions of the ankle (i.e., plantarflexion and dorsiflexion) allow for better access to the talar dome in anterior and posterior ankle arthroscopy. Noninvasive distraction may increase accessibility in anterior approaches, but has no benefit from posterior. Clinical Relevance This study provides insight into the morphology of the ankle joint in a standardized laboratory setup and illustrates the influence of different surgically relevant ankle joint positions. The presented data allow for better preoperative planning for the arthroscopic treatment of talar osteochondral defects.

The aim of this study was to investigate the reliability of distal interphalangeal joint (DIPJ) subluxation and articular surface involvement measurements during the assessment of bony mallet finger. Two observers measured articular involvement, subluxation ratio and rated joint congruency on 30 lateral radiographs of patients with bony mallet finger on two separate occasions. All measurements and ratings were done on magnified digital radiographs on a workstation. The intraclass correlation coefficient (ICC) and kappa statistics were used to establish relative agreement between observers. The intra-observer reliability for articular involvement and subluxation ratio were good for Observer A (ICCs 0.888 and 0.775) and excellent for Observer B (ICCs 0.958 and 0.910) on both occasions. However, the subluxation rating was moderate for both observers (kappa 0.772 and 0.780, respectively). Inter-observer reliability for articular involvement (ICC 0.884) and the subluxation ratio (ICC 0.818) was good on the first measurement. Although the subluxation rating was perfect for the first measurement (kappa 0.927), it was moderate for the second (kappa, 0.619). The reliability of articular involvement (%) and subluxation ratio (%) measurement was good and excellent. However, the decision on whether the DIPJ is congruent or incongruent was only moderately reproducible. These findings show us that surgeons should be cautious when assessing subluxation, which is the most important criterion for choosing the appropriate treatment.

Patellar fracture morphology varies based on the mechanism of injury. Most fractures are either a result of direct impact or through an indirect eccentric extensor contraction injury. Each fracture pattern requires appropriate preoperative planning and individualization of the fixation method. Displaced fractures affect the extension apparatus, and often require surgical fixation. Surgical treatment is recommended in fractures with any of the following features: articular step-off > 2 mm, > 3 mm of fracture displacement, open fractures, and displaced fractures affecting the extensor mechanism. Meticulous handling of the soft-tissue envelope is of the utmost importance, given the patella's tenuous blood supply and limited soft-tissue envelope. Incongruent articular surface can result in detrimental long-term effects; therefore, surgical treatment is directed toward anatomic reduction and fixation. The evolution of patellar fracture fixation continues to maximize options to balance rigid fixation with low-profile fixation constructs. Improving functional outcomes, minimizing soft-tissue irritation, and limiting postoperative complications are possible by using the therapeutic principles of rigid anatomical fixation and meticulous soft-tissue handling.

Background Transtrochanteric posterior rotational osteotomy (PRO) is one of the joint-preserving surgeries for osteonecrosis of the femoral head. In general, postoperative femoral neck-shaft varus realignment is planned to obtain a sufficient intact articular surface of the femoral head in the weight-bearing portion. Unlike anterior rotational osteotomy, PRO allows for more than 90° rotation of the femoral head, resulting in more complicated morphology. However, little is known about the potential risk of postoperative femoral retroversion after PRO. This simulation study aims: 1) to assess whether postoperative femoral neck-shaft varus realignment can coexist with preserved femoral anteversion after PRO, 2) and whether postoperative proximal femoral morphology could be predicted with approximation equations. Hypothesis High degree (> 90°) PRO is favourable for femoral neck-shaft varus realignment, but unfavourable for maintaining postoperative femoral anteversion. Materials and methods PRO was simulated by using CT data from 10 hips in 10 healthy volunteers. During simulation, the intertrochanteric osteotomy plane was determined three-dimensionally based on anteroposterior-view line (the osteotomy line on anteroposterior view) and lateral-view line (the osteotomy line on lateral view). By changing either the angle of anteroposterior-view line or lateral-view line, we simulated 90°, 110°, 130° and 150° PRO. To clarify the effects of various posterior rotation angles on postoperative proximal femoral morphology, we made simplified PRO models through changing only the posterior rotation angle. Results In the 90°, 110°, 130° and 150° PRO models, the vertically inclined angle of anteroposterior-view line showed a significant positive correlation with femoral neck-shaft varus realignment (90° PRO, r = 0.90; 110° PRO, r = 0.95; 130° PRO, r = 0.97; 150° PRO, r = 0.99), while a significant negative correlation with postoperative femoral anteversion angle (90° PRO, r = −0.97; 110° PRO, r = −0.95; 130° PRO, r = −0.92; 150° PRO, r = −0.7). Likewise, the posteriorly tilted angle of lateral-view line showed a significant negative correlation with both femoral neck-shaft varus realignment (90° PRO, r = −0.81; 110° PRO, r = −0.81; 130° PRO, r = −0.79; 150° PRO, r = −0.72) and postoperative femoral anteversion angle (90° PRO, r = −0.90; 110° PRO, r = −0.89; 130° PRO, r = −0.92; 150° PRO, r = −0.88). In the simplified PRO models, the posterior rotation angle showed a significant positive correlation with femoral neck-shaft varus realignment (r = 0.33), while a significant negative correlation with postoperative femoral anteversion angle (r = −0.76). The approximation equations for predicting the proximal femoral morphology after PRO were validated. Discussions It was confirmed that high-degree PRO (> 90°) is favourable for femoral neck-shaft varus realignment, but works against preserving femoral anteversion. With the approximation equations developed in the current study, surgeons could examine the feasibility of PRO based on postoperative femoral anteversion. In terms of hip joint function and subsequent total hip arthroplasty, excessive deformities including femoral retroversion and severe varus deformity could be avoided. Level of evidence IV; case series without control group.

The tibial pilon fracture is a complex lesion, which requires experienced clinical judgment and adequate planning to achieve good results. Treatment concepts enunciated by Ruedi and Allgower remain valid but have undergone modifications. The reconstitution of the fibular length is not always the first step to be performed. In the reconstruction of the articular surface, the prognosis is already sealed by the initial cartilage damage, and it is better to achieve stability and alignment. The stabilization of the medial column is essential, but it must be associated with the stabilization of at least one other column in complex fractures.

BACKGROUND Previous studies analyzing the acetabuli in patients with slipped capital femoral epiphysis (SCFE) have not definitively addressed the relationship between SCFE and acetabular shape. Femoral head overcoverage and acetabular version are thought to contribute to SCFE. The purpose of this study was to determine the acetabular morphology and orientation in hips with SCFE and compare them with normally developing children. METHODS Pelvic computed tomography (CT) images of patients with SCFE were compared with pelvic CTs of patients without orthopedic abnormalities (normal controls). Three-dimensional (3-D) reconstructions were created from each CT examination. Custom software uniformly aligned the pelvis then determined acetabular measures from the reconstructions including acetabular version, acetabular tilt, articular surface area, and acetabular coverage angle measured in a radial manner dividing the acetabulum into octants. RESULTS Two-hundred forty-four hips were included (53 SCFE, 31 unaffected contralateral hips in patients with SCFE, and 160 controls). The acetabular version was similar among SCFE hips, unaffected contralateral hips, and normal controls (P=0.48). Control hips had higher acetabular tilt than SCFE-affected hips (P=0.01) and unaffected contralateral hips (P=0.04). The acetabular surface area was higher in SCFE-affected hips compared with controls (P

Background An important surgical landmark in the distal radius is the watershed line. The watershed line is a landmark for the positioning of volar locking plates (VLP) in the distal radius. Inconsistencies remain in the literature as to the presence and dimensions of landmarks in this compact area. We studied the detailed anatomy and dimensions of the distal radius with reference to bony anatomy around the watershed line, with special attention to the area between the pronator quadratus (PQ) and radial styloid. Materials and Methods The distal radius regions of 31 cadavers (23 right sided and 8 left sided) were dissected and studied. The heights at the junction of the scaphoid and lunate fossa, at the radial styloid, at the midpoint in between, and the widths of the PQ line, scaphoid, and lunate fossa were measured. The angle subtended by the pronator fossa and the radial styloid was also recorded. Results The mean heights at the junction of the scaphoid and lunate fossa, radial styloid, and midpoint in between were 5.1, 15.7, and 8.2 mm, respectively. The widths of the PQ line, scaphoid, and lunate fossa were 27, 19.4, and 10.6 mm, respectively. The mean angulation between the pronator fossa and the radial styloid was 128.9 degrees. Conclusion The area between the PQ and watershed line comprises a narrow area of bone which tapers to a point at its medial extent largely below the lunate fossa, thus it can hardly contain any implant proximal to the lunate fossa. The anterior orientation of this area and the concave anatomy of the articular surface mean careful screw direction is imperative to avoid inadvertent joint penetration. An angulation exists between the pronator fossa and the radial styloid, below the scaphoid fossa.

An interesting international debate has been developed over the past 10 years (the last decade) surrounding the surgical procedure for recurrent anteroinferior instability and a definitive consensus is lacking on the factors which favor one technique over another, especially when bone loss is present (soft tissue vs. bone block). Glenoid bone loss is commonly observed in the shoulder with anterior instability, and it is difficult to evaluate the shape of the glenoid using plain radiograph, therefore, computed tomography or intraoperative observation is recommended for accurate assessment of glenoid bone loss and Hill-Sachs lesion. When we consider the bony defect of the glenoid as a risk factor for surgical failure, it is crucial to take into consideration the features of a concomitant Hill-Sachs lesion. However, all the previous reports focusing on the size of the Hill-Sachs lesion or on the glenoid bone loss in isolation, overlook the interaction of the 2 lesions through the arc of range of motion and how this may influence instability. The glenoid track is the first model to determine, in a dynamic way, how bone loss on both sides of the joint can lead to instability. The glenoid track is a zone of contact created by the glenoid on the humeral articular surface when the arm is moved along the end-range of motion (abduction and external rotation). The use of the glenoid track concept can potentially help guide surgical decision-making.

Background The objective of this study was to predict the function of the forearm rotation on the basis of the articular surface of the sigmoid notch from three-dimensional reconstruction images. Methods We retrospectively reviewed patients who underwent volar plate fixation for intra-articular distal radius fractures (DRFs) in our institution between January 2017 and July 2019. The 3D image of the sigmoid notch on the fractured distal radius was reconstructed and looked up from the ulnar view to determine the existence of gaps or steps. Patients with or without gaps/steps on the sigmoid notch were included in the case group or control group, respectively. The patients’ basic data and postoperative data were collected and compared. Results A total of 81 patients were included. There were 33 patients in the case group, and 48 patients in the control group. There was no significant difference between the two groups at baseline. The total range of motion (ROM) of rotation in the case group and control group was 130.3 ± 6.2° and 145.3 ± 6.7°, respectively (P < 0.001). The percentage of rotation ROM of contralateral limb in the case group and control group was 72.3 ± 3.1% and 80.7 ± 3.6%, respectively (P < 0.001). VAS during forearm rotation was 2.1 ± 0.7 in the case group, which is significantly higher than that in the control group (1.5 ± 0.5, P < 0.001). Conclusion This study proposed a new method to assess the articular surface of the sigmoid notch which is based on 3D reconstruction images. With the assistance of this method, we found that gaps or steps on the sigmoid notch not only limit forearm pronation rotation and supination rotation, but also cause apparent wrist pain during forearm rotation movement and poor wrist ability.

Objective The aim of the present study was to explore the surgical treatment and prognosis of 27 cases of neurofibromatosis type 1 with severe dystrophic kyphosis. Methods We performed surgical treatment for scoliosis and kyphosis caused by dystrophic curves at Peking Union Medical College Hospital, Beijing, China from December 2015 to December 2017. The study included 21 patients with moderate to severe kyphosis, 12 males and 9 females, with an average age of 14.95 ± 6.05 years. All patients had kyphosis angles greater than 70° and had more than four skeletal developmental defects. A total of 6 patients with severe kyphosis, 2 males and 4 females, with an average age of 12.5 years, had more than five skeletal developmental defects with a kyphosis angle greater than 90° or a lumbar kyphosis angle greater than 40°. According to the patient's own situation, we adopted a low‐grade surgery scheme (grades 1 or 2) or a high‐grade surgery scheme (grades 3–6). The low‐grade surgery was mainly lower articular surface resection or pontodestomy, and the high‐grade surgery was mainly apical vertebral body or upper discectomy. All patients were followed up to determine their prognosis. Results Statistical analysis showed that there was a significant difference in preoperative and postoperative scores between the two groups (P 0.05). Conclusion Early identification of dysplastic scoliosis‐related deformities plays an important role in surgical planning and prognosis, and low‐level surgical procedures are more favorable for patients' prognosis., Surgical treatment had a significant effect on scoliosis kyphosis. Approximately 50% of complications after internal fixation were related to high‐level surgery. Gender, age, extent of resection, height, and body mass index had no significant effect on preoperative, postoperative, and prognostic indicators of patients.

Objectives To assess the outcome of the sinus tarsi approach and C-Nail fixation of displaced intra-articular calcaneal fractures (DIACFs). Design Prospective study. Setting University Trauma Department. Patients Sixty-four patients (mean age 44.3 years, 48 men and 16 women) with 75 DIACFs were treated between October 1, 2016 and December 31, 2018. Intervention In all cases, the posterior facet was reduced through the sinus tarsi approach and fixed with one or 2 screws. After reducing all fragments to the articular block, the final fixation was performed percutaneously with C-Nail, locked with 6 screws. Main outcome measurements Patients were assessed for restoration of the Bohler angle, complications, and overall fracture reduction. To assess the functional outcome, we used the Mean American Orthopaedic Foot & Ankle Society Ankle-Hindfoot Score and Maryland Foot Score after 12 months. Results The Bohler angle improved from -0.5 degrees preoperatively to 28.6 degrees postoperatively. The articular step-off was reduced from 5.4 mm preoperatively to 0.6 mm postoperatively. The postoperative radiologic calcaneal score was 2.9, on average. Superficial wound edge necrosis was seen in 3 patients (4%) and superficial infection was observed in one (1.3%). After a 1-year follow-up, we recorded a mean American Orthopaedic Foot & Ankle Society Ankle-Hindfoot Score of 90.2 and a mean Maryland Foot Score of 91.2. Conclusions After obtaining an anatomic reduction of the articular surface of the posterior facet with lag screws, the C-Nail represented a viable alternative to plate stabilization in the treatment of DIACFs, combining primary stability with low soft tissue complications. Level of evidence Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Objective To evaluate the morphological similarity of bilateral coronoid process. Methods A total of 128 sets of computed tomography images of bilateral coronoid process from patients between January 2015 and December 2016 were acquired for three‐dimensional reconstruction to generate a coronoid process model. The patients were aged between 31.4 ± 9.3 years. The upper 40% of the coronoid process was trimmed as targeted fragment for morphological analysis. The height, length, width as well as the radius of the medial and lateral facet of the targeted fragment were compared in terms of laterality, age, and gender. To evaluate the similarity of the articular surface of the coronoid process, a local coordinate was created and coordinate transformation algorithm was developed to realign the bilateral coronoid process for the following matching. Then Delaunay triangulation was introduced for calculation of the area of the articular surface. After matching of articular surface of the upper 40% of bilateral coronoid process, the overlapping area of the articular surface was quantified to assess the similarity in morphology and compared in regard to age and gender. Results In this study, the height of the target fragment was 12.40 ± 2.74 mm, which was 12.62 ± 2.06 mm for male patients and 12.13 ± 3.76 mm for female patients (t = 0.94, P = 0.35). The height of the target fragment was 12.79 ± 1.76 mm for patients >40 years and 13.23 ± 3.16 mm for patients 40 years and 23.23 ± 2.14 mm for patients 40 years and 23.46 ± 3.38 mm for patients 40 years and 6.46 ± 0.94 mm for patients 40 years and 12.46 ± 3.94 mm for patients 40 years and it was 87.4% ± 13.2% for patients, Coronoid is a crucial anatomical structure in maintaining elbow function and reconstruction of coronoid is of great importance in restoration of elbow stability. Zhang, et al. revealed the similarity of bilateral coronoid in morphology, which suggested an option of restoration of coronoid defect with three‐dimensional printed prosthesis based on the spatial information of the contralateral coronoid

Weightbearing computed tomography (WBCT) enables visualization of the foot and ankle as patients stand under load. Clinical measurements of WBCT images are generally limited to two-dimensions, which reduces the ability to quantify complex morphology of individual osseous structures as well as the alignment between two or more bones. The shape and orientation of the healthy/normal subtalar joint, in particular, is not well-understood, which makes it very difficult to diagnose subtalar pathoanatomy. Herein, we employed statistical shape modeling to evaluate three-dimensional (3D) shape variation, coverage, space, and congruency of the subtalar joint using WBCT data of 27 asymptomatic healthy individuals. The four most relevant findings were: (A) talar and calcaneal anatomical differences were found regarding the presence of (a) the talar posterior process, (b) calcaneal pitch, and (c) curvature of the calcaneal posterior facet; (B) the talar posterior facet articular surface area was significantly greater than the calcaneal posterior facet articular surface area; (C) the posterior facet varied in joint space distance, whereas the anteromedial facet was even; and (D) the posterior and anteromedial facet of the subtalar joint was consistently congruent. Despite considerable shape variation across the population, the posterior and anteromedial articular facets of the subtalar joint were consistently congruent. Results provide a detailed 3D analysis of the subtalar joint under a weightbearing condition in a healthy population which can be used for comparisons to pathological patient populations. The described SSM approach also shows promise for clinical evaluation of the subtalar joint from 3D surface reconstructions of WBCT images.

Up to one fifth of glenoid fractures are intra-articular and associated with recurrent anterior dislocation. Surgery is often the indicated treatment, and as with many other articular fractures, it aims for a perfectly congruent and flush reconstruction of the articular surface to avoid the onset of secondary degenerative joint diseases. The purpose of this paper is to describe a reproducible, simple arthroscopic technique that uses suture anchors to fix the glenoid fragment with a strong and stable construct called "kissing anchors." This method provides the advantages of both direct and indirect stabilizing effects. It applies 2 anchors, one inside the fragment and the other inside the fracture bed, to stabilize and fix the fragment, and is adequately associated with labrum refixation, which provides the construct with increased stability. However, a surgeon willing to apply it should already be confident with basic shoulder arthroscopy and should have performed an appropriate amount of arthroscopic shoulder stabilizations.

Despite profound advancements in arthroscopic rotator cuff repair (RCR) techniques, radiologic failure rates may be in excess of 60% with repairs of large and massive tears in the elderly population. One of the strategies to improve these healing rates has been “patch” augmentation of the cuff repair. At the same time, superior capsular reconstruction (SCR) has gained significant popularity as an option for irreparable rotator cuff (RC) tears. Some have also advocated performing SCR in addition to arthroscopic RCR to reinforce the repair and improve healing rates. Techniques involving the use of fascia lata, ECM patches, and long head of the biceps (LHB) for SCR to reinforce the cuff repair have all been elegantly described. In this article, we propose a technique that enables a combination of the aforementioned procedures and involves performing RCR with patch augmentation, as well as SCR using LHB. In doing so, the repaired RC is bordered by the patch over its bursal surface and the LHB on the articular surface (functioning as the superior capsule), thus giving us the name “Hamburger technique” (a 3-layered construct).

Background The optimal treatment of acetabular fractures in the senior cohort is undetermined. Total hip arthroplasty in the setting of an acetabular fracture is increasing in popularity. However, there is concern regarding the fixation of a prosthetic cup in a fractured acetabulum. The purpose of this study is to map the area of stable articular surface and bone corridors available for cup fixation in this fracture cohort. Methods CT scans of acetabular fractures in 131 consecutive geriatric patients older than 65 years from two level 1 academic trauma centers were analyzed. Acetabular fractures were classified using the Letournel classification, the available stable articular surface, and the bone corridors available for fixation. Results Fractures involving the anterior column were the most common fracture type seen. The dome only pattern was the most common stable articular surface pattern. The sciatic corridor was available for fixation in all fracture types, followed by the gluteal pillar corridor. Most fractures had at least two corridors (93%) available for screw fixation. Conclusions The findings of this study may aid in the development and evaluation of fixation strategies for acetabular cups allowing geriatric acetabular fracture patients earlier weight bearing after primary hip arthroplasty.

Second-generation bicruciate stabilized (BCS) total knee arthroplasty (TKA) was developed to substitute both anterior and posterior cruciate ligaments and replicate physiological kinematics. This study aimed to evaluate if the postcam mechanism and the surface geometry function effectively. Seventeen and twelve knees implanted with BCS TKA and posterior stabilized (PS) TKA, respectively, were analyzed. In vivo kinematics during deep knee flexion were estimated from single-plane fluoroscopic images using a 2-dimensional to 3-dimensional image registration technique. Flexion angle, anteroposterior translation, femoral external rotation (ER), and postcam engagement were compared between the groups. Postoperative 2011 Knee Society Score (KSS) was obtained at the last follow-up. The medial femoral condyle in BCS was positioned more anteriorly than that in PS from minimum flexion to maximum flexion. Posterior motion of the lateral femoral condyle was observed in both groups. ER of BCS was significantly larger compared to PS from minimum flexion to 100°. However, the amount of ER from minimum flexion to maximum flexion was similar: 6.2° ± 4.5° and 7.7° ± 4.1° in BCS and PS, respectively (P = .364). Anterior postcam engagement was observed in 76.5% and 25.0% in BCS and PS, respectively (P = .006). Posterior postcam engagement was observed in all cases in BCS and PS. There were no significant differences in KSS between the groups. The kinematic differences were likely a result of variations in articular surface geometry.

Purpose To evaluate the magnetic resonance imaging (MRI) characteristics of Segond fractures, including the structures attached to the avulsed fragment, the integrity of anterolateral ligament (ALL) and iliotibial band (ITB), and fragment size and location. Methods This was a retrospective, cross-sectional study with MRI scans from 2016 to 2019 with the term “Segond” in the reports, signs of acute trauma, and a bony anterolateral tibial avulsion (Segond) fracture. Two experienced observers accessed images to evaluate fragment dimensions (anteroposterior, mediolateral, and craniocaudal) and distances from anatomic landmarks (Gerdy’s tubercle, articular surface, and posterolateral tibial corner). ALLs and ITBs also were evaluated, both for integrity and for attachment to the avulsed bony fragment. Data were statistically evaluated for significant correlations. Results Forty-eight knee MRIs of patients suffering from a combined anterior cruciate ligament and Segond injury were evaluated. The ALL presented with edema in 28 cases (58.3%) and was torn in 3 cases (6.3%). The ALL was attached to the bone fragment in all cases and the ITB also was attached in 25 cases (52.1%). Receiver operating characteristic curves also demonstrated that the larger each of the dimensions and the volume of the fragment, the greater the probability of ITB fibers being inserted. Also, the narrower the distance from the fragment to the center of Gerdy’s tubercle, the greater the probability of iliotibial band fibers being attached. Interobserver correlation varied from 0.87 to 0.97 for all measurements. Conclusions In all combined ACL injuries and Segond fracture MRI cases, the complete ALL inserted on the avulsed bony fragment, whereas the posterior part of the ITB was only attached in 52.1% of the cases. Segond fracture fragment size was predictive for the structures attached to it. The ALL was abnormal in 64.5% of cases and presented a clear discontinuity in 6.3%. Level of Evidence Case Series, Level IV.

Purpose To characterize the dorsal ulnar corner fragment with regard to size and morphology using 3-dimensional software and computed tomography (CT) scans, as it presents in low-energy intra-articular distal radius fractures occurring in the female postmenopausal population. Methods A multicenter retrospective review was conducted to identify postmenopausal females with low-energy distal radius fractures treated surgically at level-1 trauma centers. Patients with low-energy injuries with preoperative CT scans were included. The Digital Imaging and Communications in Medicine (DICOM) data from CT scans were used to reconstruct intra-articular fracture patterns. The dorsal ulnar fragment was isolated in each CT scan and measured, then normalized based on lunate depth. Results Eighty patients met the inclusion criteria. The mean dimension measurements of the dorsal ulnar corner were dorsal surface height, 9.82 ± 5.02 mm (95% confidence interval [95% CI], 8.72–10.92); dorsal surface width, 9.06 ± 3.72 mm (95% CI, 8.25–9.88); articular surface width, 7.44 ± 3.92 mm (95% CI, 6.58–8.30); articular surface depth, 4.14 ± 2.39 mm (95% CI, 3.62–4.67). The mean lunate depth measurement (17.52 ± 1.48 mm) was used to normalize articular surface depth demonstrating that, on average, the dorsal ulnar corner comprises 23.6% of the articular surface ± 13.6% (95% CI, 20.7–26.6). Conclusions The mean articular surface depth of the dorsal ulnar corner fragment in this study was less than 5 mm, accounting for approximately 24% of the volar-dorsal width of the distal radius at the lunate facet. Clinical relevance These data expand current understanding of the morphology and size of the dorsal ulnar corner fracture fragment. If fixation of this fragment is a goal, surgeons may need to use longer screws that penetrate closer to the dorsal cortex than those required for extra-articular fractures or to consider alternative methods of fragment-specific fixation for adequate capture of this fragment.

Summary Osteochondritis dissecans (OCD) commonly develops in the elbow, knee, and other joints of teenage patients who are engaged in sporting activities. However, OCD of the glenoid (OCD-Gl) is rarely found in teenage patients, especially those in their early teens. To our best knowledge, there have been no English reports of OCD-Gl in the early teens. A 13-year-old, right-handed amateur baseball infielder felt sharp pain in his right shoulder and noted articular repitus after making a long throw. An anteroposterior radiograph of the right shoulder showed an apparent linear fracture of the glenoid. On the bilateral shoulder view, separation of the epiphysis of the proximal right humerus (epiphysiolysis) was evident. Axial computed tomography (CT) showed a linear crack in the articular surface. Three-dimensional CT (3D-CT) revealed a bulge on the posterior side of the glenoid. The final diagnosis was OCD-Gl associated with Little Leaguer's shoulder. After four months, the linear crack in the glenoid was no longer detected on Xray films. Since the crack and bulging of the glenoid were also no longer seen on CT scans, so he was permitted to play baseball again. On review at 22 months, he had continued playing baseball without pain or crepitations and a radiograph showed no recurrence. Because diagnosis of OCD-Gl is difficult, it may not be recognized until the clinical stage gradually advances in the late teens or twenties. But, early detection and treatment at a younger age remains the best management for OCD-Gl. Considering the present case, there is a possibility that OCD-Gl may ccur in the early teens.

This study aimed to compare the contact areas of Bankart repair with suture anchors placed on the articular surface of the glenoid versus at the rim of the glenoid because it is unclear which technique most effectively restores the footprint after Bankart repair. Ten fresh frozen cadaveric shoulders (mean age 70.7 years) were dissected. The attachment site of the capsulolabral complex from the 1 o’ clock position to the 6 o’clock position was marked with ink, and the contact area of the anterior-inferior capsulolabral complex on the glenoid neck was measured using imageJ. Bankart lesions were created, and two types of Bankart repair were performed on each specimen. The suture anchors were inserted at the glenoid rim (Rim group) and onto the glenoid articular surface 2 mm from the rim (Surface group). Using pressure-sensitive films, we examined the interface contact area. The Rim group recreated 64.9% of the native surface area, while the Surface group recreated 47.3% of the area. The Rim group recreated significantly greater contact area compared to the Surface group (P = 0.0008). The anchor placement to the glenoid rim recreates the footprint of the capsulolabral complex on the anterior inferior glenoid better than the anchor placement onto the articular surface.

Background. Implants used for total knee arthroplasty (TKA) in Asian patients are mostly produced based on anthropometry of the Western population, thus causing problem with patella sizing, especially in Asian females where the patellae are regarded to be smaller. This study is to define intraoperative patella dimensions in our female populations and compare them with current prosthetic systems available at our institution. Methods. This is a cross-sectional study involving 156 TKA female patients with normal patellae. The patella height, width, thickness, medial and lateral articular facets’ width and thickness, and the dome position were measured. The smallest implant size from 3 manufacturers was compared to the data obtained. Analysis using descriptive statistics was used to get the mean and median of anatomical patella dimensions, whereas the independent T test and one-way ANOVA test were used to compare the Malaysian female’s patella dimensions with various implant sizes. Results. The articular surface of the patella was found to have an oval shape with a width-height ratio of 1.31. The mean (SD) patella thickness, width, and height were 20.7 (1.85) mm, 40.7 (3.79) mm, and 31.3 (2.81) mm, respectively. Only 17.9% fit for smallest implant size from all 3 manufacturers. The oval-shape implant was suitable in 53.8% patients based on their width-height ratio. The dome position is 2.2 mm medial to centre. Conclusion. These female patients have thinner and smaller patella, which are generally unable to accommodate patellar components based on the Caucasian database. Therefore, orthopaedic implant manufacturers should consider optimizing the thicknesses as well as widths of their patellar prostheses.

Purpose Technical innovation now offers the possibility of 2-mm diameter operative arthroscopy: an alternative to conventional arthroscopy that no longer uses inner rod-lenses. The purpose of this study was to assess whether all significant structures in the ankle could be visualized and surgically reached during 2-mm diameter operative arthroscopy, without inflicting iatrogenic damage. Methods A novel, 2-mm diameter arthroscopic system was used to perform a protocolled arthroscopic procedure in 10 fresh-frozen, human donor ankles. Standard anteromedial and anterolateral portals were utilized. Visualization and reach with tailored arthroscopic instruments of a protocolled list of articular structures were recorded and documented. A line was etched on the most posterior border of the talar and tibial cartilage that was safely reachable. The specimens were dissected and distances between portal tracts and neurovascular structures were measured. The articular surfaces of talus and tibia were photographed and inspected for iatrogenic damage. The reachable area on the articular surface was calculated and analysed. Results All significant structures were successfully visualized and reached in all specimens. The anteromedial portal was not in contact with neurovascular structures in any specimen. The anterolateral portal collided with a branch of the superficial peroneal nerve in one case but did not cause macroscopically apparent harm. On average, 96% and 85% of the talar and tibial surfaces was reachable respectively, without causing iatrogenic damage. Conclusion 2-mm diameter operative arthroscopy provides safe and effective visualization and surgical reach of the anterior ankle joint. It may hold the potential to make ankle arthroscopy less invasive and more accessible.

Purpose The primary aim in fixation of the tibial plateau fractures is the restoration of normal anatomy. Evaluation of the widening of the tibial plateau, which has been linked with adverse long term outcomes, still needs precise markers for quantification. The purpose of this study is to analyze the normal limits of tibial plateau widening in the Indian population in relation to the distal femur in a standardized manner to provide important radiological parameters for the same. Methods We retrospectively analyzed electronically archived true AP radiographs of uninjured normal knee joints during one year between 2018 and 2019. We measured the mediolateral width of the articular surface and extraarticular extent of the tibial plateau and compared them with the distal femoral articular and extra-articular extents. The measurements were compared between the male and female groups. Results Tibial plateau articular width was found to be 4% wider in relation to the distal femoral articular surface. The medial articular rim of distal femur matches closely to the medial articular rim of the tibial plateau. The lateral articular rim of distal femur lies medial to the lateral articular rim of tibial plateau with a mean distance of 3.49 mm. Conclusions Owing to individual variations in bony extents around the knee, the differential extent of tibial plateau relative to distal femur would be a more reliable parameter than absolute measurements. Medially the articular extent of distal femur matches closely with the articular extent of tibial plateau while the lateral extra-articular extent of distal femur matches closely with the lateral tibial articular extent. Gender-based differences do not significantly affect these two parameters.

BACKGROUND: Metal-on-Metal (MoM) total hip arthroplasty (THA) represents a very controversial procedure because of the possibility of postoperative adverse local tissue reaction (ALTR). This study investigates the reliability of the ultrasound scan as a diagnostic tool to quantify a clinically useful threshold in the level of periprosthetic fluid collection to suggest implant revision. METHODS: This study includes 116 patients (123 implants) who received an Articular Surface Replacement XL (ASRTMXL, De Puy Synthes, USA) MoM THA. The study group included 56 males and 60 females with a mean age of 66.6 years (range, 15–86 years). All patients were clinically and radiologically annually evaluated (according to the Harris Hip Score) up to a mean follow-up of 7.5 years (min. 1.4 – max. 10.3 years) from the primary surgery: all patients underwent standard ultrasound evaluation of the affected hip and Cobalt/Chromium blood detection testing according to a custom-made diagnostic algorithm for MoM THA revision. RESULTS: At final follow-up, 51 (43.1%) of 117 implants underwent revision after a mean of 6 years (1.79–9.26) from the primary ASR implant. The authors found a statistically significant correlation between Cr (p = 0.015) and Co (p = 0.009) blood values and different ultrasound grades. Statistical analysis showed a significant association between periprosthetic fluid collection and revision surgery (p

Background Articular surface curvature design is important in tibiofemoral kinematics and the contact mechanics of total knee arthroplasty (TKA). Thus far, the effects of articular surface curvature have not been adequately discussed with respect to conforming, nonconforming, and medial pivot designs in patient-specific TKA. Therefore, this study evaluates the underlying relationship between the articular surface curvature geometry and the wear performance in patient-specific TKA. Methods We compare the wear performances between conventional and patient-specific TKA under gait loading conditions using a computational simulation. Patient-specific TKAs investigated in the study are categorized into patient-specific TKA with conforming articular surfaces, medial pivot patient-specific TKA, and bio-mimetic patient-specific TKA with a patient’s own tibial and femoral anatomy. The geometries of the femoral components in patient-specific TKAs are identical. Results The anterior-posterior and internal-external kinematics change with respect to different TKA designs. Moreover, the contact pressure and area did not directly affect the wear performance. In particular, conforming patient-specific TKAs exhibit the highest volumetric wear and wear rate. The volumetric wear in a conforming patient-specific TKA is 29% greater than that in a medial pivot patient-specific TKA. Conclusion The findings in this study highlight that conformity changes in the femoral and tibial inserts influence the wear performance in patient-specific TKA. Kinematics and contact parameters should be considered to improve wear performance in patient-specific TKA. The conformity modification in the tibiofemoral joint changes the kinematics and contact parameters, and this affects wear performance.

To test the hypothesis that an inclined articular surface on the medial proximal tibia is aligned more parallel to the ground in three-dimensional (3D) space under weight-bearing (WB) conditions (parallel phenomenon) than under non-WB (NWB) conditions in healthy and varus osteoarthritic knees. We examined 55 healthy knees (26 women, 29 men; mean age, 70 ± 6 years) and 108 varus osteoarthritic knees (66 women, 16 men; mean age, 74 ± 7 years). For the evaluation under WB conditions, a 3D assessment system was used on biplanar long-leg radiographs and 3D bone models using a 3D-to-2D image registration technique. In addition, the least square method was used to determine the approximation plane. The angles between the normal vector for the approximation plane of an articular surface on the medial proximal tibia and each axis of the tibial or world coordinate system were calculated. Morphologically, the inclination of the approximation plane was steeper in osteoarthritic knees than in healthy knees (p

The medial femoral trochlea (MFT) of the knee is a donor site for convex osteochondral vascularized bone that has been used for the salvage of fractures of the proximal pole of the scaphoid. Chronic nonunited fractures of the scaphoid may lead to a sequence of degenerative change often referred to as scaphoid nonunion advance collapse. The vascularized MFT osteochondral graft has been reported as a salvage procedure for fractures of the proximal pole of the scaphoid, in situations where fixation is not an option. In this “Special review,” we describe the technique of free vascularized MFT graft in a case in which the nonunited scaphoid fracture was associated with segmental loss of the articular surface of the scaphoid waist. Given the likely progression of arthritis, if left untreated, we elected to treat this by replacing the lost articular surface using a vascularized intercalary osteochondral MFT graft between the nonunited scaphoid segments.