Search

We report high-performance amorphous Indium-Gallium-Zinc-Oxide nanowire field-effect transistors ($\alpha $ -IGZO NW-FETs) featuring an ultrascaled nanowire width (${W}_{{\mathrm {NW}}}$) down to ~20 nm. The device with 100 nm channel length (${L}_{{\mathrm {CH}}}$) and ~25 nm ${W}_{{\mathrm {NW}}}$ achieves a decent subthreshold swing (SS) of 80 mV/dec as well as high peak extrinsic transconductance (${G}_{m,{\mathrm {ext}}}$) of $612~\mu S/\mu \text{m}$ at a drain–source voltage (${V}_{{\mathrm {DS}}}$) = 2 V ($456~\mu S/\mu \text{m}$ at ${V}_{{\mathrm {DS}}}$ = 1 V). The good electrical properties are enabled by using an ultrascaled 5 nm high- ${k}$ HfO2 as the gate dielectric, a water-free ozone-based atomic layer deposition (ALD) process, and a novel digital etch (DE) technique developed for indium-gallium-zinc-oxide (IGZO) material. By using low-power BCl3-based plasma treatment and isopropyl alcohol (IPA) rinse in an alternating way, the DE process is able to realize a cycle-by-cycle etch with an etching rate of ~1.5 nm/cycle. The scaling effects on device performance have been analyzed as well. It shows that the downscaling of ${W}_{{\mathrm {NW}}}$ improves the SS notably without sacrificing ON-state performance, and the shrinking of ${L}_{{\mathrm {CH}}}$ boosts the ${G}_{m,{\mathrm {ext}}}$. The ultrascaled $\alpha $ -IGZO NW-FETs could play an important role in applications where high performance and high density are highly desired. [ABSTRACT FROM AUTHOR]

In this paper, we present an intensive study of 6T-SRAM designs for vertical gate-all-around (GAA) transistors (VFETs) and lateral GAA transistors (LFETs) using 5-nm node design rules. Optimizations of the nanowire (NW) diameter and the gate length are also conducted to enhance the SRAM performance. Device VT retargeting has been proposed for improving the minimum operating voltage ( V\min ) of SRAMs. The isoperformance and isoyield have been performed to assess and determine the benefits provided by LFET and VFET architectures, respectively. Our results show that the VFET bitcells are denser than the LFET bitcells by 20%–30%. The SRAM read stability (read static noise margin) is significantly improved using the NW channel. For a $6\sigma $ yield target and an isoarea of SRAM bitcells, V\min of the VFET bitcell is 80 mV lower than LFET designs. Applying the proposed VT retargeting technique can allow the VFET 122 bitcell to operate at 0.57 V without using assist circuits. A standby leakage below 10 pA/cell can be achieved for both architectures. At isoperformance, the standby leakage of VFET bitcells is $2.6\times $ lower than LFET bitcells. [ABSTRACT FROM AUTHOR]

For sub-7-nm technology nodes, the gate-all-around (GAA) nanowire-based device structure is a strong candidate to sustain scaling according to Moore’s Law. For the first time, the performance of two GAA device options—lateral FET (LFET) and vertical FET (VFET)—is benchmarked and analyzed at the system level using an ARM core processor, based on realistic compact device models at the 5-nm technology node. Tradeoffs among energy, frequency, leakage, and area are evaluated by a multi- Vth optimization flow. A variety of relevant device configurations, including various number of fins, nanowires, and nanowire stacks, are explored. The results demonstrate that an LFET GAA core has a larger maximum frequency than its VFET counterpart because the channel stress that can be created in the LFETs results in a larger ON current. For fast timing targets, the LFET cores are therefore superior. However, for slow timing targets (e.g., 5 ns), the VFET cores with three nanowires offer a 7% area reduction and a 20% energy saving compared with the LFET cores with 2fin/2stack at the same leakage power. [ABSTRACT FROM PUBLISHER]

In this paper, we compare the performances of FinFETs, lateral gate-all-around (GAA) FETs, and vertical GAAFETs (VFETs) at 7-nm node dimensions and beyond. Comparison is done at ring oscillator level accounting not only for front-end of line devices but also for interconnects. It is demonstrated that FinFETs fail to maintain the performance at scaled dimensions, while VFETs demonstrate good scalability and eventually outperform lateral devices both in speed and power consumption. Lateral GAAFETs show better scalability with respect to FinFETs but still consume 35% more energy per switch than VFETs if made under 5-nm node design rules. [ABSTRACT FROM AUTHOR]

In this letter, we present the first InGaAs gate-all-around (GAA) nanowire devices fabricated on 300mm Si substrates. For an \(L_{\mathrm {\mathbf {G}}}\) of 60 nm an extrinsic \(g_{\mathrm {\mathbf {m}}}\) of \(1030~\mu \) S \(/\mu \) m at \(V_{\mathrm {\mathbf {ds}}} = 0.5\) V is achieved which is a \(1.75\times \) increase compared with the replacement fin FinFet process. This improvement is attributed to the elimination of Mg counterdoping in the GAA flow. Ultrascaled nanowires with diameters of 6 nm were demonstrated to show immunity to \(D_{\mathrm {{it}}}\) resulting in an SS \(_{\mathrm {{SAT}}}\) of 66 mV/decade and negligible drain-induced barrier lowering for 85-nm \(L_{\mathrm {{G}}}\) devices. [ABSTRACT FROM AUTHOR]