Search

Nitrogen-fixing bacteria (NFB) can reduce nitrogen at ambient pressure and temperature. In this study, we treated effluent from a paper mill in sequencing batch reactors (SBRs) and monitored the abundance and activity of NFB with a view to producing a sludge that could work as a biofertilizer. Four reactors were inoculated with activated sludge enriched with NFB and fed with a high C/N waste (100:0.5) from a paper mill. Though the reactors were able to reduce the organic load of the wastewater by up to 89%, they did not have any nitrogen-fixing activity and showed a decrease in the putative number of NFB (quantified with qPCR). The most abundant species in the reactors treating high C/N paper mill wastewater was identified by Illumina MiSeq 16S rRNA gene amplicon sequencing as Methyloversatilis sp. (relative abundance of 4.4%). Nitrogen fixation was observed when the C/N ratio was increased by adding sucrose. We suspect that real-world biological nitrogen fixation (BNF) will only occur where there is a C/N ratio ≤100:0.07. Consequently, operators should actively avoid adding or allowing nitrogen in the waste streams if they wish to valorize their sludge and reduce running costs. PRACTITIONER POINTS: Efficient biological wastewater treatment of low nitrogen paper mill effluent was achieved without nutrient supplementation. The sludge was still capable of fixing nitrogen although this process was not observed in the wastewater treatment system. This high C/N wastewater treatment technology could be used with effluents from cassava flour, olive oil, wine and dairy industries.

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

The objective of this study was to check the potential of crude xylano-pectinolytic enzymes in bleaching of rice straw pulp, in order to reduce the toxic waste load for managing the environmental pollution. The xylano-pectinolytic enzymatic bleaching step for delignification was found to be most effective at pulp consistency 1:10 g/ml, xylanase:pectinase dose of 9:4 IU/ml, pH 8.5 and treatment time 180 min at temperature of 55 °C, and resulted in lowering of kappa number of the rice straw pulp by 15.29%. In subsequent bleaching stages, this enzymatic pre-bleaching treatment also resulted in 30% reduction of active chlorine dioxide dose without any loss of optical properties. Significant improvement in various physical properties of the enzymes treated pulp, tear index (15.43%), breaking length (11.11%), double fold number (25.92%), burst index (9.88%) and viscosity (13.63%), and Gurley porosity (39.86%) was also noticed. This approach resulted in reduction of BOD and COD values by 21.07% and 26.57%, respectively. This is the first study on the use of crude xylano-pectinolytic enzymes for bio-bleaching of rice straw pulp.

In this study, action of ultrafiltered xylano-pectinolytic enzymes from a bacterial strain has been evaluated for bleaching of rice straw soda-anthraquinone pulp. Maximum bio-bleaching effect and release of non-cellulosic impurities were noticed with xylano:pectinolytic enzymes dose of 6.0:2.1-IU/g pulp, treatment time of 180 min at 10% pulp consistency, pH 8.5, and temperature 55 °C. Microscopic images of bio-bleached rice straw pulp also confirmed the efficacy of ultrafiltered enzymes, as bleaching agent. This bio-bleaching treatment resulted in 15.38% and 32% reduction in kappa number and active chlorine dioxide dose, respectively, along with increase in various physical properties, burst index (12.50%), tear index (19.07%), breaking length (14.30%), double fold number (26.31%), Gurley porosity (45.32%) and viscosity (16.17%). This bio-bleaching approach not only improved the pulp quality but also reduced environmental pollution load by decreasing effluent parameters values of BOD and COD by 23.67% and 27.44%, respectively. This study indicates that use of ultrafiltered xylano-pectinolytic synergism for rice straw pulp bleaching will ultimately help in making the process eco-friendly, along with better quality pulp. This is the first report on use of ultrafiltered xylanase and pectinase, produced from a bacterial isolate, for bleaching of rice straw pulp.

The pulp bleaching process removes or transforms the chromophore groups in the pulp, so that the final product reaches a desired brightness. However, this chemical treatment inevitably results in yield loss. Therefore, the objective of this work was to quantify the yield loss caused during the bleaching of kraft pulp of Pinus radiata delignified with oxygen. The material was submitted to three distinct ECF sequences (D0(EPO)D1D2, D0(EPO)D1P, and Z/EDP). At the end of each bleaching stage, the pulp brightness and the loss of gravimetric yield of the process were determined, and the generated filtrates were collected. From these filtrates, the pollutant load of the effluent was determined by measuring the content of total dissolved solids, the chemical oxygen demand, the concentration of total organic carbon carbon, and the adsorbable organic halogens. Among the whole sequences, the Z/EDP sequence had the lowest gravimetric yield, the highest pollutant load in the collected filtrate, and lowest potential for adsorbable organic halogens generation. There was good correlation between the loss of yield from the bleaching process and the organic load of the generated effluent; and among the techniques studied, the quantification of total organic carbon was the most appropriate method for the indirect quantification of the yield loss during the bleaching process of the studied material.

Aim of this research was to treat the organics enriched Paper and Pulp Industry (PPI) effluents using multi-metal tolerant predominant indigenous bacterial species. In addition, assessing the potential of treated bacterial biomass as a single cell protein (SCP). The multi-metal tolerant Streptomyces tuirus OS1 was enumerated from the Paper and Pulp Industry (PPI) effluents was identified through standard molecular characterization. S. tuirus OS1 proficiently ameliorated organic contaminants in PPI effluent in the in study at 35 °C, 45 °C, and 25 °C. Fortunately, the S. tuirus OS1 considerably increased the dissolved oxygen level in treated PPI effluent in 30 days of bioremediation process. Interestingly, at 35 °C of bioremediation process the S. tuirus OS1 demonstrated increased dried biomass (7.1 g L

Pulp and paper industries are very important for developing the Brazilian economy. During production processes, many effluents are generated with high polluting potential. The objective of this study is to conduct an extensive literature review on the characteristics of effluents and treatment forms adopted by Brazilian mills in this industrial sector. Most consulted studies address raw (without treatment) and secondary (after biological treatment) effluents, considering their main characteristics like pH, chemical and biochemical oxygen demands (COD and BOD, respectively), color, solids, organochlorines, toxicity, estrogenic activity, and phenols. Raw effluents differ considerably in composition, depending on the type of paper produced, the pulping process employed, and other steps, like pulp bleaching. Raw effluent characteristics indicate that this effluent cannot be directly disposed of into water bodies, because it does not comply with federal and state disposal standards. Secondary effluents normally comply with Brazilian legislations, although some studies have reported COD and total phenol concentrations higher than disposal standards, suggesting that additional treatments are necessary. Treated effluent reuse was verified in some Brazilian mills, while its disposal in eucalyptus plantations has been considered a promising alternative for irrigation purposes.

Paper for recycling has become a promising raw material for the pulp and paper industry due to its low cost and because it is conducive to sustainable development. Unfortunately, recycled paper contains a high volume of printed paper that is difficult to deink, which restricts its applications. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This study was performed to evaluate the deinkability of environmentally friendly offset inks by flotation deinking. For this purpose, three mineral oil free series of four-color inks, namely, hybrid light emitting diode ultraviolet (LED-UV), LED-UV, and vegetable oil-based inks, were printed on white lightweight coated papers under laboratory conditions. The deinking methodology involves repulping, deinking agent treatment, flotation, hand sheet making, and evaluation of the produced hand sheets. The obtained results indicated that the hybrid LED-UV prints had the best deinkability. After flotation deinking, the deinking efficiency and the whiteness of the hybrid LED-UV ink increased by 58.1% and 47.6%, respectively. LED-UV ink had a 46.9% increase in the deinking efficiency and a 37.0% increase in the whiteness of the hand sheet. The deinking efficiency of the vegetable oil-based ink was the lowest, at 42.1%, and the whiteness of the hand sheet increased only by 23.8%. The particle size distribution analysis demonstrated that the hybrid LED-UV four-color ink exhibited a larger value of the average particle size than the two other. Scanning electron microscopy revealed that the hybrid LED-UV ink particles on the surface of the fibers were the least abundant after deinking. The physical strength properties of the hand sheets, including tensile index, folding resistance, and interlayer bonding strength of the hybrid LED-UV, LED-UV inks, and vegetable oil-based inks, increased.

In this study, an internal circulation-anoxic/aerobic (IC-A/O) process followed by ultrafiltration (UF) and reverse osmosis (RO) system was applied for paper wastewater reclamation. The IC-AO system presented a stable and efficient performance, achieving high removal of chemical oxygen demand (COD), total organic carbon (TOC) and total nitrogen (TN) with methane production rate of 132.8 mL/d. Acute toxicity to Daphnia magna (D. magna) was reduced significantly (83.2%) and the spearman's rank correlation analysis indicated that the toxicity of effluents from each reactor were positively correlated with COD and TOC. Hexadecanoic acid, octadecanoic acid and benzophenone were the main toxic contributors for biological effluent. Microbial community revealed that Anaerolinea was significantly related with organic pollutants. The UF-RO system further removed pollutants and toxicity with the final effluent COD, TOC, ammonium nitrogen (NH4+-N) and TN of 32.6, 18.8, 0.3 and 9.2 mg/L, respectively, which proved that it was feasible for paper wastewater reuse. This study presented an efficient, practical and environmentally competitive system, and paved a foundation for the treatment and reuse of paper wastewater.

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis.

Early and on-site detection of environmental contaminations and physicochemical parameters of seawater is increasingly preferred to guarantee hazard minimization in many settings. In this paper, we describe a combination of microfluidic paper-based sensors (µPADs) and an Android-based smartphone application (App) for simultaneous on-site quantification of phosphate (PO

As human beings have been consistently exposed to bisphenol A (BPA) and bisphenol S (BPS) derived from various products, the intake of BPS/BPA to humans has been extensively studied. However, using conventional biological matrices such as urine, blood, or dissected skin to detect BPS/BPA in the human body system requires longer exposure time to them, hardly defines the pollutant source of the accumulated BPS/BPA, and is often invasive. Herein, our new approach i.e. fingerprint analysis quantitatively confirms the transfer of BPS/BPA from receipts (specific pollution source) to human skin only within receipt-handling of “20 s”. When receipts (fingertip region size; ~1 cm2) containing 100–300 μg of BPS or BPA are handled, 20–40 μg fingerprint-1 of BPS or BPA is transferred to human skin (fingertip). This transferred amount of BPS/BPA can still be toxic according to the toxicity test using water fleas. As a visual evidence, a fingerprint map that matches the distribution of the absorbed BPS/BPA is developed using a mass spectrometry imaging tool. This is the first study to analyze fingerprints to determine the incorporation mechanism of emerging pollutants. This study provides an efficient and non-invasive environmental forensic tool to analyze amounts and sources of hazardous substances.

The article presents the research results of the oxidation of watered toxic waste from the pulp and paper industry (sludge-lignin, the empirical formula of organic matter CH1.51N0.05S0.03Cl0.01O0.54) in supercritical water-oxygen (SCW/O2) fluid. The experiments were carried out using a flow tube reactor at a pressure of 25 MPa, temperature gradient along its vertical axis (from top to bottom: 390–600 °C), sludge-lignin flow rate of 9.5–14.5 g/min, oxygen ratio OR = 0.73–2.52, using NaOH (1.6 wt%) as a catalyst. Employing gas chromatography – mass spectrometry, polychlorophenols were identified in the composition of sludge-lignin, in which 2,4,6-trichlorophenol was the main component. The total yield of extracted phenols and chlorophenols per sludge-lignin organic matter was 20.82 and 2.88 μg/g, respectively. It is revealed that the conversion rate of sludge-lignin in SCW/O2 fluid is limited by heterogeneous oxidation of the carbonized residue, and is determined by the O2 content in the reaction mixture. At OR ≥ 1.16, only CO2, CO, N2, and N2O were detected in the volatile oxidation products. An increase in OR from 0.73 to 2.52 leads to a decrease in the total content of phenols (from 45540.1 to 129.3 μg/dm3) and chlorophenols (from 51.4 to 2.2 μg/dm3) in the water collected at the reactor outlet. It is shown that 2,6-dichlorophenol and 2-chlorophenol are the most resistant to oxidation. From the analysis of the initial sludge-lignin and mineral residues, it follows that the bulk of the chlorine contained in its organic matter is converted into NaCl in the course of oxidation.

Nowadays, the paper industry supplies its required fibers either from primary fibers, including wood and plants, or waste papers, called secondary fibers. One of the most challenging recycling processes is deinking of papers digitally printed with electrophotographic ink. In order to produce optically high-quality paper from recycled waste papers, deinking step is required at the desired levels. In this work, the environmentally friendly green enzymatic deinking of printed paper was modeled and optimized via an innovative approach called artificial intelligence method. The effect of treatment temperature, treatment time, and enzyme dosage on mechanical properties (tensile and burst strengths) as well as optical properties (whiteness and brightness) of handsheet was investigated. The developed code can appropriately learn the non-linear behavior of deinking process, and make decisions according to the pattern constructed intelligently. Finally, multi-objective optimization at the specified treatment temperature, treatment time, and enzyme dosage was performed to identify the best conditions for enzyme-deinked handsheet (maximized mechanical and optical properties).

Bio-bleaching effect on bagasse pulp using xylano-pectinolytic enzymes produced by a bacterial species was studied in order to evaluate the potential of these enzymes in paper industry. In this study, action of enzymes was maximum with xylanase/pectinase dose 7/1.75 IU/g, pulp consistency 1:12.5 g/L, pH 8.5, temperature 50° C and 180 min of treatment time. Under the optimized bio-bleaching conditions, removal of reducing sugars (6.15±0.05 mg/L), brightness (16.08%), whiteness (25.54%) and release of chromophores (hydrophobic and phenolic compounds and lignin impurities) were maximum, along with decrease in kappa number (26.28%), and yellowness (27.88%) values were obtained. Improvement in the various physical properties like breaking length (10.28%), burst index (29.55%), tear index (5.02%), double fold (14.89%), Gurley porosity (15%) and viscosity (8.6%), along with the reduction of chlorine dioxide dose by 27%, was also observed. There is also reduction in COD and BOD values of bio-bleached effluents by 27.62% and 20.52%, respectively. This is the first report on bio-bleaching of bagasse pulp using xylano-pectinolytic enzymes.

Bisphenol A (BPA), a well-known endocrine disruptor, is used as a color developer in thermal paper. More recently, some emerging structural analogues have been introduced to replace BPA due to the strengthened regulations concerning thermal paper. Nevertheless, very limited data are available regarding their occurrence and potential health risks. Here, thirteen potentially toxic compounds were investigated in paper products (120 thermal papers and 81 nonthermal papers) collected in Beijing, China. The results indicated that the replacement of BPA by alternatives such as Bisphenol S (BPS), Bis(2-chloroethyl)ether-4,4″-dihydroxydiphenyl sulfone copolymer (D-90), 4-hydroxyphenyl 4-isoprooxyphenylsulfone (D-8), Bis(4-hydroxyphenyl)sulfonylphenyl (BPS-MAE) and Bis-(3-allyl-4-hydroxyphenyl) sulfone (TGSA) has been significantly advanced in several types of thermal paper (i.e., market weight stickers, train tickets, express labels, air boarding passes and lottery tickets). The mean value for the total analyte concentrations in thermal paper was 6.06 mg/g, and the highest level found was 26.0 mg/g. In addition, the frequent detection of these chemicals in nonthermal paper (>80%, n = 81) demonstrated that the contamination in thermal paper can be spread into other recycled paper, such as corrugated boxes, newspapers, food contact papers, etc. The estimated daily intake of BPA and its alternatives through the handling of thermal paper was 0.025 μg/kg bw/day for the general population. This is the first report on the occurrence of various new BPA alternatives in paper products from China, which will be helpful for further risk assessment and making responsible replacement decisions.

Despite the extensive use of the Internet, printed newspapers remain a primary information source. In this study, reading a newspaper in a relatively confined or poorly ventilated indoor space was simulated to determine the profile of particles released from the newspaper into the air. The consecutive simulated conditions were reading without agitation of the newspaper (NoAg), followed by reading with agitation of the newspaper (Ag) and post-reading absent the newspaper (PostR), repeated with four newspapers. We found that particle number concentration (ΣN) fell during Ag owing to electroadhesion of ultrafine particles (200 nm) caused by static charges created by friction between the paper surface and the air as a result of newspaper agitation. Conversely, particle surface area concentrations (ΣA) and particle volume concentrations (ΣV) increased significantly during Ag. This was because the larger, fine (1-2.5 μm) and coarse mode (2.5-10 μm), particles were detached from the newspaper during agitation due to inertial detachment - the release of even a small number of these particles contributing greatly to ΣA and ΣV. The critical particle number diameter (CPND) occurred at 207-310 nm. Particles smaller than this were subject to electroadhesion during Ag. The critical particle volume diameter (CPVD) occurred at 130-497 nm. Particles larger than this were subject to inertial detachment during Ag. These observations indicate that the electroadhesion of smaller particles and the inertial detachment of larger particles occur simultaneously. Particle mass concentrations were found to be as high as 168.7-534.3 μg m

Due to the high demand of paper and related items, pulp and paper industry is flourishing day by day. With increased production, come the hazards associated with the toxic elements present in the effluents. Various microorganisms are currently employed in the remediation of these toxic effluents. In addition, various techniques like ozonation, electrocoagulation, UV treatment, Fenton's reagent, and photo-Fenton based techniques are used in advanced oxidation processes to reduce these toxins from effluents. This review highlights various above mentioned advanced techniques and innovative processes along with the biological remediation of these toxic effluents with the help of some potential microbial consortia or their combinatory effects. Moreover, the present review will also disclose the ideas on utilizing the tools of metabolic engineering, systems biology, and artificial intelligence towards microbial engineering for relatively better bioremediation processes. In the future, these techniques might be helpful in increasing the capability of microbial consortia towards detoxification of effluents to make them environmentally safe. Finally, this review gives well-synchronized approaches to get more insights into these innovative methodologies and techniques and their use for various industrial applications.

This research was carried out with an objective to examine the efficacy of ultrafiltered xylano-pectinolytic enzymes in pulping of sugarcane bagasse. Maximum biopulping was achieved with enzyme dose of xylanase (175 IU / g bagasse) and pectinase (75 IU / g bagasse) at treatment period of 180 min. The temperature, pH, and bagasse to liquid ratio for biopulping experiments were kept constant at 55o C, 8.5, and 1:10 (g/ml), respectively. The ultrafiltered biopulping improved chemical pulping, resulted in 25.11%, 9.17% increase in brightness, unscreened pulp production and 11.81, 59.50, and 49.14% decrease in total solids, rejections. and kappa number, respectively. The bagasse biopulping also resulted in 15% decrease of alkali load to attain similar kappa number and optical properties as obtained under 100% alkali dosage. Ultrafiltered biopulped-unbleached samples showed significant increase in breaking length (13.55%), burst index (40.21%), tear index (19.04%), double fold (42.5%), Gurley porosity (28.21%) and viscosity (13.37%) in comparison with non-enzymatically treated control pulp samples. In comparison with non biotreated-bleached pulp samples, ultrafiltered biopulped-bleached samples also resulted in higher burst index (56.80%), breaking length (17.38%), double fold (39.58%), tear index (3.38%), viscosity (30.68%), and Gurley porosity (52.50%). This environmentally sustainable ultrafiltered biopulping approach for sugarcane bagasse has the potential to decrease the demand of chemicals, ultimately pollution along with enhance the quality of paper.

Due to the presence of various organic contaminants, improper disposal of pulp-paper wastewater poses harm to the environment and human health. In this work, pulp-paper sludge (PPS) after secondary treatment were collected from M/s Century Pulp-paper Mills in India, the chemical nature of the organic pollutants was determined after solvent extraction. All the isolates were able to produce lipase (6.34–3.93 U ml− 1) which could account for the different fatty acids detected in the PPS. The dominant strains were in the classes of α and γ Proteobacteria followed by Firmicutes. The Shannon-Weiner diversity indexes for phylotype richness for the culturable and non-culturable bacterial community were 2.01 and 3.01, respectively, indicating the non- culturable bacterial strains has higher species richness and diversity compared to the culturable bacterial strains. However, the culturable strains had higher species evenness (0.94 vs 0.90). Results suggested only a few isolated strains were resistant to the POPs in the PPS, whereas non-cultural bacteria survived by entering viable but non-cultural state. The isolated strains (Brevundimonas diminuta, Aeromonas punctata, Enterobacter hormaechei, Citrobacter braakii, Bacillus pumilus and Brevundimonas terrae) are known for their multidrug resistance but their tolerance to POPs have not previously been reported and deserved further investigation. The findings of this research established the presence of POPs which influence the microbial population. Tertiary treatment is recommended prior to the safe disposal of pulp paper mill waste into the environment.

In recent years, increasing efforts have focused on production of organic-inorganic compound fertilizers using ammonium sulfite pulping waste liquor. However, their ecological effects on soil have not been studied. In this study, earthworm Eisenia fetida was exposed to various doses (0, 0.13, 0.26 and 0.52 kg/m2) for different time (7, 14, 21, and 28 d) to evaluate the effects of fertilizers made from pulping waste liquor, including reactive oxygen species (ROS) generation, antioxidant enzymes activities, glutathione S-transferase enzyme (GST) activity, malondialdehyde (MDA) content and DNA damage. Results showed that there were significant increase of ROS and MDA levels after 14 d, inducing production of antioxidant enzymes (superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT)) as well as GST. Before 14 d, excess ROS and MDA caused damage to the DNA of earthworms, leading to gradual increase of Olive tail moment (OTM) in the comet assay. With the exposure time extended to 28 d, owing to the combined effects of elimination of free radicals by antioxidant enzymes and detoxification enzymes as well as self-repairing function of cells, ROS and MDA levels declined slightly and OTM gradually decreased. In summary, this study indicated that there was a toxicological effect on earthworms when fertilizers made from pulping waste liquor were applied to soil, which needs more attention.

Porous magnesium oxide (MgO) films on carbon fiber paper (CF) have been successfully fabricated in a hydrothermal route at different calcination temperatures. The CF@MgO samples (CF@MgO-300, -400, and -500) show different morphologies with the increasing surface area from 3 for CF to 27 m2 g−1 for CF@MgO-400. Among the four investigated samples, the CF@MgO-400 exhibits the highest phosphate removal ability (~ 1230 mg g−1) with promising applications for the large-scale utilization at low cost.

After a long-term toxicity study on Bisphenol A (BPA), the European Union and U.S food and drug administration updating the rules regarding the usage of BPA by extending the prohibition of BPA to include in the production of papers, on February 2018. Therefore, it is essential to establish the trace level BPA detectors in paper samples. In this report, the synthesis of novel ZnO nanoclusters wrapped with reduced graphene oxide (ZnO NCs/rGO) and its application towards the selective electrocatalytic detection of BPA are described. Initially, ZnO NCs/rGO is synthesized by the one-step hydrothermal approach, and various characterizations explain the compound's compositions and structure. The significance of ZnO NCs/rGO together with good electrocatalytic properties leads this material to the platform for electrochemical sensor. Finally, ZnO NCs/rGO was fabricated and validated as an effective sensor for the sensitive detection of BPA. The demonstrated sensor revealed excellent detection of BPA with the very low detection limit (2.1 nM), and also it offered good analytical parameters with more extensive linear range and higher sensitivity. Likewise, the sensor annexes good durability, reproducibility, and selectivity towards the determination of BPA. Due to the nourishing capacity of the prepared ZnO NCs/rGO, it is employed for the detection of BPA in tissue paper samples.

In this work, an eco-friendly solution for the remediation of wastewater generated in the lignin recovery process from eco-industrial paper mill has been proposed in their way towards a more circular economy strategy. Thus, the application of the electro-Fenton process for the degradation of the non-recovered lignin and other organic compounds form a scarcely studied acid black liquor waste (ABLW) was successfully performed. This treatment was able to operate in a range of COD loads (0.5–19.5 mg O2·L–1) showing high degradation values of the ABLW determined by the abatement of color, total phenolic content and COD. Then, the optimization of the working conditions for the design of a sustainable treatment system with optimum efficiency was carried out using a response surface methodology. The experiment carried out in the calculated optimal conditions for the electro-Fenton degradation process (current intensity 132.5 mA, catalyst dosage of 0.10 mM, and temperature 40 °C) showed a COD removal of 74.82% and current efficiency 77.79%, close to the theoretical value predicted by the model 73.12% and 77.06%, respectively. In addition, the identification of the final products permitted to confirm the mineralization efficiency.

Since the 1980s, the pulp and paper industry in Finland has resulted in the accumulation of fibres in lake sediments. One such site in Lake Näsijärvi contains approximately 1.5 million m3 sedimented fibres. In this study, the methane production potential of the sedimented fibres (on average 13% total solids (TS)) was determined in batch assays. Furthermore, the methane production from solid (on average 20% TS) and liquid fractions of sedimented fibres after solid-liquid separation was studied. The sedimented fibres resulted in fast methane production and high methane yields of 250 ± 80 L CH4/kg volatile solids (VS). The main part (ca. 90%) of the methane potential was obtained from the solid fraction of the sedimented fibres. In addition, the VS removal from the total and solid sedimented fibres was high, 61–65% and 63–78%, respectively. The liquid fraction also contained a large amount of organics (on average 8.8 g COD/L), treatment of which also has to be considered. The estimations of the methane production potentials in the case area showed potential up to 40 million m3 of methane from sedimented fibres. acceptedVersion

A novel lignin-based flocculant (LBF) with superior flocculation performance was prepared from paper mill sludge in this work. The functional groups of LBF and alkaline lignin (AL) were determined by Fourier transform infrared spectroscopy (FTIR). The flocculation performance of LBF integrated with polyaluminum chloride (PAC) was tested in reactive dye wastewater treatment. Floc properties and color removals in multiple flocculation systems were discussed. Results indicated that the dye removal (93%) was greatly facilitated as the LBF was integrated with PAC (PAC + LBF). In addition, floc properties and color removals were significantly improved in the presence of Ca2+ and Mg2+. In contrary, flocculation performance was greatly restricted in the presence of SO4 2−. LBF was less pH sensitive and shear sensitive than polyacrylamide (PAM) due to the enhanced charge neutralization and bridging action. On the basis of that, LBF could be used as a promising flocculant in dye wastewater treatment.

Bisphenol A (BPA) was commonly used as color developer for thermal paper such as cash register receipts, labels or tickets. Therefore, thermal paper was considered by the European Food Safety Authority (EFSA) as the main source of human exposure to BPA beside epoxy based food contact materials. In this study, a German market analysis on the use of BPA and alternative color developers in thermal paper receipts is provided for the years 2015, 2016 and 2017.114 (2015), 98 (2016) and 99 (2017) samples were randomly collected and analyzed by HPLC-DAD. In summary, BPA was still the most frequently found color developer (48.2% in 2015, 46.9% in 2016 and 52.5% in 2017). The most commonly used alternative was the phenol-free substance Pergafast® 201 (34.2%, 33.7%, 40.4%). The bisphenol analogs bisphenol S (BPS; 11.4%, 9.2%, 6.1%) and D8 (6.1%, 7.1%, 1.0%) were less common. Another phenol-free substituent, a urea urethane compound (UU), was also detected (3.1% in 2016). Concentrations of color developers in thermal paper ranged from 1.4 to 32.4 mg/g (median values between 2.5 and 15.9 mg/g). Concentrations of BPA were found to be highest followed by BPS, UU, Pergafast® 201 and D8. In addition, two pharmacologically active substances, dapsone (6.0 mg/g) and tolbutamide (5.5 mg/g), were detected in a non-marketed thermal paper, that was supposed to use ascorbic acid as initial color developer. Different release experiments of the detected color developers were performed. Sensitizers 1,2-diphenoxy-ethane, 1-phenylmethoxy-naphthalene and diphenylsulfone, used frequently in the thermal paper processes, were quantified.

Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13–0.8 ng TEQ kg −1 , and 0.15–1.9 pg TEQ L −1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t −1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ.

This is a review of the literature published in 2018 related to the prevention of water pollution by or recovery of beneficial materials from wastewater produced in the pulp and paper industry. This review includes the following main sections: cleaner production, biological treatment, and physico-chemical treatment. PRACTITIONER POINTS: Converting pulp and paper treatment sludges to value-added materials can be efficient cleaner production technique. Modeling and dynamic simulation techniques of biological treatment along with optimization methods can improve the effluent quality out of a paper mill. Hybrid treatment systems can have a synergistic effect on the treatment of pulp and paper effluents.

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g−1. The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d−1. BPA has been also detected in recycled paper with concentrations up to 46 μg g−1. Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure.

One-time ultrasonication pre-treatment of Rhodobacter sphaeroides was evaluated for improving biohydrogen production via photofermentation. Batch experiments were performed by varying ultrasonication amplitude (15, 30, and 45%) and duration (5, 10, and 15 min) using combined effluents from palm oil as well as pulp and paper mill as a single substrate. Experimental data showed that ultrasonication at amplitude 30% for 10 min (256.33 J/mL) achieved the highest biohydrogen yield of 9.982 mL H2/mLmedium with 5.125% of light efficiency. A maximum CODtotal removal of 44.7% was also obtained. However, when higher ultrasonication energy inputs (>256.33 J/mL) were transmitted to the cells, biohydrogen production did not improve further. In fact, 20.6% decrease of biohydrogen yield (as compared to the highest biohydrogen yield) was observed using the most intense ultrasonicated inoculum (472.59 J/mL). Field emission scanning electron microscope images revealed the occurrence of cell damages and biomass losses if ultrasonication at 472.59 J/mL was used. The present results suggested that moderate ultrasonication pre-treatment was an effective technique to improve biohydrogen production performances of R. sphaeroides.

Recycled paper mill effluent (RPME) contains high levels of organic and solid compounds, causing operational problems for anaerobic biological treatment. In this study, a unique modified anaerobic inclining-baffled reactor (MAI-BR) has been developed to treat RPME at various initial chemical oxygen demand (COD) concentrations (1000–4000 mg/L) and hydraulic retention times (HRTs) (3 and 1 day). The COD removal efficiency was decreased from 96 to 83% when the organic loading rate (OLR) was increased from 0.33 to 4 g/L day. Throughout the study, a maximum methane yield of 0.25 L CH4/g COD was obtained, while the pH fluctuated in the range of 5.8 to 7.8. The reactor performance was influenced by the development and distribution of the microbial communities. Based on the next-generation sequencing (NGS) analysis, the microbial community represented a variety of bacterial phyla with significant homology to Euryarchaeota (43.06%), Planctomycetes (24.68%), Proteobacteria (21.58%), Acidobacteria (4.12%), Chloroflexi (3.14%), Firmicutes (1.12%), Bacteroidetes (1.02%), and others (1.28%). The NGS analysis showed that the microbial community was dominated by Methanosaeta concilii and Candidatus Kuenenia stuttgartiensis. This can be supported by the presence of filamentous and spherical microbes of different sizes. Additionally, methanogenic and anaerobic ammonium oxidation (ANAMMOX) microorganisms coexisted in all compartments, and these contributed to the overall degradation of substances in the RPME.

Plastic waste at the coastal wetland in Martil beach in the North-East of Morocco is one of the problems that have appeared recently. This study aims to characterize the marine debris in the coast of Martil during the year 2015. The sampling is seasonally by type and size. The result shows, for the macro debris, the abundance of plastic (57%), lumber and paper (21.93%), cloth and fabric (7.8%), glass (5.42%), metal (4.40%), and rubber (3.4%). Micro debris is also present in the area in several forms such as wood, plants, and others by 75,63%. This was followed by the foam (26,95%), line (7,8%), and the film (1,23%). The seasonal variation (S1: January–March and S3: July to September) are the most polluted months of the year. The sources of marine debris are mainly tourism (beach users), land (run off), and commercial fishing in the four seasons of the year.

In this study, suitability of xylano-pectinolytic enzymes in pulping of wheat straw has been explored. The suitable biopulping conditions were optimized, with xylanase dose of 400 and pectinase dose of 120 IU/g wheat straw, 1:10 (g/ml) material to liquid ratio, 55 °C temperature, 3 h treatment time, 0.75% Tween 80 and pH 8.5. Enzymatic pretreatment efficiently increased the pulpability of wheat straw, generated pulp with higher yield, lower kappa number (15.67%) and rejections (59.65%) in comparison with chemical pulp. The brightness of pretreated wheat straw pulp with enzyme was 16.04% higher than that of the non-enzyme treated wheat straw pulp. The biopulping resulted in 12% reduction of pulping chemicals along with more residual alkali content, in order to achieve similar optical and chemical properties as obtained by 100% chemically treated pulp. Physical properties of pulp also improved after enzymatic pretreatment, increasing burst index (26.50%), tear index (18.22%) and breaking length (5.56%). The enzyme plus chemical (88% pulping chemicals) treated pulp showed improvement in brightness and whiteness, with reduction in yellowness at all bleaching stages. In comparison with chemically bleached pulp, biopulp with reduced alkali dose (88%) had higher breaking length (6.63%), double fold number (51.28%), tear index (2.83%), burst index (24.31%), along with increased viscosity (6.12%) and Gurley porosity (27.50%). These results clearly suggest that biopulping of wheat straw with xylano-pectinolytic enzymes can reduce chemical loading during soda-anthraquinone pulping and also improve the quality of paper. This is the first report demonstrating the biopulping of wheat straw using crude xylano-pectinolytic enzymes.

Bisphenol A (BPA) is a high production volume chemical that has wide industrial applications, especially as a color developer in thermal papers. The present study focused on the determination of levels of BPA in thermal receipts collected from different locations in Akure, Nigeria, and the estimation of daily intake of BPA through dermal absorption. Thermal receipts were collected from different locations, and the levels of extracted BPA were determined using fluorescence spectroscopy. The daily intake of BPA was estimated, and the amount was compared with the reference value. BPA was detected in all the samples analyzed with levels ranging from 1.50 to 3.16 mg/g. These values were lower than the values detected in thermal receipts obtained from other countries. The estimated mean daily intakes of BPA by dermal absorption due to handling of thermal receipts were 0.20 and 9.89 μg/day for the general population and the occupationally exposed individuals, respectively, and were much lower than the reference value of 50 μg/kg bw/day provided by the European Food Safety Authority. This indicates that dermal exposure to BPA is not a serious health risk to the population.

Lipase enzyme has a critical role in deinking process along with other lignocellulosic enzymes. In this paper, we try to demonstrate the role of lipase in the enzyme cocktail used for enzymatic deinking. For this, we identified a potential lipolytic bacterium, Pseudomonas mendocina ED9 isolated from elephant dung with a molecular weight of 35 kDa. During the Box-Benhken model optimization, a maximum lipase activity of 105.12 U/g, which was 12.36-fold higher than the initial enzyme activity and 1.3-fold higher than the activity obtained during the Plackett Burman design, was achieved. A maximum lipase activity of 105.12 U/g was obtained after optimization. Ammonium sulphate (60%) precipitation resulted in a specific activity of 68.19 U/mg with a 1.4-fold purification and yield of 64%. Lipase from P. mendocina ED9 exhibited a Km of 0.5306 mM and Vmax of 25.0237 μmol/min/mg. A Δ brightness of approximately 14.5% were achieved during the enzymatic deinking using cocktail comprised of cellulase, xylanase and lipase. This reports the significant role and efficacy of lipase in enzyme cocktails for deinking applications. This formulation will reduce the pollution and environmental toxicity of conventional chemical deinking.

A novel adsorbent, the uniform fiber ball (UFB) loaded with polypyrrole (UFB-PPy), was synthesized for Cr(VI) removal from water in this paper. The structure of the UFB and UFB-PPy were characterized by SEM, EDS, FT-IR, BET, XPS and TG. The adsorption properties of UFB-PPy towards Cr(VI) were investigated by the effects of temperature, initial concentration of Cr(VI), interfering ions and contact time in batch experiments, the isothermal models (Langmuir, Freundlich and Temkin) and the kinetic models (Pseudo first-order kinetic, Pseudo second-order kinetic and Intra-particle diffusion models) were used to describe the adsorption behavior. The effects of the initial concentration and flow rate of the Cr(VI) solution in the column experiments were also studied, and the dynamic models (Yoon-Nelson, Adams-Bohart and Wolborska model) were applied to predict the adsorption performance. The Cr(VI) removal mechanism of UFB-PPy was revealed by studying the effect of pH on adsorption, testing of Cl−, and analyzing the XPS. The results showed that UFB-PPy exhibited excellent adsorption properties for Cr(VI) both in batch and column adsorption. The possible adsorption mechanism involved electrostatic attraction, ion exchange and reduction. Conveniently, the chromium resources can be recovered with the form of high-purity Cr2O3 by simple calcination of Cr(VI)-captured UFB-PPy (UFB-PPy-Cr).

Fly ash (FA) from biomass combustion and biological sludge (S), both wastes from the pulp and paper industry, were granulated in different proportions (90% FA + 10% S, and 70% FA + 30% S w/w, dry weight basis, dw) and used to recover the functionality of soils affected by mining activities (Aljustrel, Iberian Pyrite Belt), with and without the application of municipal solid waste compost (MSWC). Application doses of both mixtures were 2.5, 5.0 and 10% (w/w, dw). These materials corrected soil acidity to circumneutral values and increased extractable P and K concentrations. A significant increase in soil organic matter (from 0.6 to 0.8–1.5% w/w, dw) and N content (from 0.04 to 0.09–0.12% w/w, dw) was also observed, but only when MSWC was applied. The soil was already heavily contaminated with Cu, Pb and Zn and the application of amendments did not increase their pseudo-total concentrations. The CaCl2 extractable fractions of both Cu and Zn decreased to very low values. The improvement in soil quality, compared to fertilizer only treatment, was further evidenced by the increase in some soil enzymatic activities (dehydrogenase, β-glucosidase and cellulase), with a better response for the granules with the higher proportion of biological sludge, as well as by the decrease in the soil-water extract toxicity towards different organisms (Daphnia magna, Thamnocephalus platyurus, and Pseudokirchneriella subcapitata). Agrostis tenuis germinated and grew during the first month only in the amended pots, but, after that, a considerable phytotoxic effect was evident. This was mainly attributed to salt stress or to some specific ionic toxicity. In conclusion, to establish a long-term plant cover in mining soils amended with biomass ash-based materials, the selection of plants with higher resistance to salinity and/or the stabilization of the amendments, to reduce their soluble salt content, is recommended.

Six elemental chlorine-free bleaching sequences were studied to see their effect on quality of pulp produced and quantity of pollutants generated during bleaching of wheat straw soda pulp. Impact of parameters like adsorbable organic halogens (AOX), chemical oxygen demand (COD), biochemical oxygen demand (BOD) and sodium adsorption ratio, pH and total dissolved solids generated during bleaching on environment as index of global pollution (IGP) was also studied. The purpose of the study was to investigate six elemental chlorine-free bleaching sequences to compare the pulp quality, effluent properties and their impact on environment. An oxygen delignification stage before D0EOPD bleaching sequence reduced the AOX, COD, colour and BOD by 44%, 42%, 36% and 33%, respectively, whereas an ozonation stage before bleaching reduced the same by 70%, 66%, 73% and 60%, respectively, as compared to those of control. The generation of pollutants as AOX, COD, colour and BOD was reduced further by 88%, 80%, 90% and 77%, respectively, with the use of short bleaching sequences (DD, DP and PD) as compared to those of control. The environmental impact as IGP with D0EOPD bleaching sequence was 2.65 which got reduced to 1.44 with bleaching sequence OZPD. Bleaching sequence OZD0EOPD was found the most effective for improving brightness and whiteness of the pulp, whereas short bleaching sequence OZPD found the most effective for reducing generation of pollutants during bleaching among different bleaching sequences studied.

Paper mill effluents are complex mixtures containing different toxic compounds including endocrine-disrupting (EDCs) and genotoxic compounds. In the present study non-concentrated raw and biologically treated wastewaters from two paper mill plants with different paper production technologies i) Paper mill A uses virgin fibres, and ii) Paper mill B uses recycled fibres for paper production and the corresponding receiving surface waters, were assessed for their cytotoxic/genotoxic activity with SOS/umuC, Ames MPF 98/100 Aqua, and comet assay with human hepatoma HepG2 cells. In addition the levels of seven selected EDCs were quantified in wastewater samples and receiving surface waters. All investigated EDCs were confirmed in raw and biologically treated effluents from both paper mills with concentrations being markedly higher in Paper mill B effluents. In the receiving surface waters three of the studied EDCs were determined downstream of both paper mills effluent discharge. The wastewater samples and the recipient surface water samples from Paper mill A were not mutagenic for bacteria and did not induce DNA damage in HepG2 cells. On the contrary, half of the raw wastewater samples from Paper mill B were mutagenic whereas biologically treated wastewater and the recipient surface water samples were negative. In HepG2 cells most of the raw and biologically treated wastewater samples from Paper mill B as well as surface water samples collected downstream of Paper mill B effluent discharge induced DNA damage. The results confirmed that genotoxic contaminants were present only in wastewaters from Paper mill B that uses recycled fibres for paper production, and that the combined aerobic and anaerobic wastewater treatment procedure efficiently reduced contaminants that are bacterial mutagens, but not those that induce DNA damage in HepG2 cells. This study highlights that in addition to chemical analyses bioassays are needed for a comprehensive toxicological evaluation of complex wastewater samples.

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03-35.72 and 6.03-31.35 ng/m3, respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64-0.90 and 1.50-2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1-4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63-81% of TAM, while the oxidized mercury accounted for 19-37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m3, or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m3, or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure.

The efficiency of combining iron sulfate and organic amendments (paper mill sludge, olive mill waste compost and olive tree pruning biochar) for the remediation of an As- and Cu-contaminated soil was evaluated. Changes in As and Cu fractionation and solubility due to the application of the amendments was explored by leachate analysis, single and sequential extractions. Also, the effects on Arrhenatherum elatius growth, germination of Lactuca sativa and toxicity to the bacteria Vibrio fischeri were assessed. The combination of iron sulfate and the organic amendments efficiently reduced As solubility and availability through the formation of amorphous iron oxides, while organic matter did not seem to mobilize As. At the same time, copper fractionation was strongly affected by soil pH and organic matter addition. The soil pH significantly influenced both As and Cu mobility. Within all the amendments tested, FeSO4 in combination with compost showed to be the most suitable treatment for the overall remediation process, as it reduced As and Cu availability andenhanced soil nutrient concentrations and plant growth. In sipte of contradictory trends between chemical analyses and ecotoxicity tests, we can still conclude that the application of organic amendments in combination with reactive iron salts is a suitable approach for the remediation of soils contaminated by Cu and As.

Knowledge about the total waste generated by the production of consumer goods can help raise awareness among policy-makers, producers and consumers of the benefits of closing loops in a future circular economy, avoiding unnecessary production and production steps and associated generation of large amounts of waste. In strict life cycle assessment practice, information on waste outputs from intermediate industrial processes of material and energy transformation is translated into and declared as potential environmental impacts, which are often not reported in the final results. In this study, a procedure to extract available intermediate data and perform a systematic pre-consumer waste footprint analysis was developed. The pre-consumer waste footprint concept was tested to analyse 10 generic products, which provided some novel and interesting results for the different product categories and identified a number of challenges that need to be resolved in development of the waste footprint concept. These challenges include standardised data declaration on waste in life cycle assessment, with a separation into waste categories illustrating the implicit environmental and scale of significance of waste types and quantities (e.g. hazardous waste, inert waste, waste for recycling/incineration) and establishment of a common definition of waste throughout sectors and nations.