Search

Domain separation is crucial for proper cellular function and numerous biomedical technologies, especially artificial cells. While phase separation in hybrid membranes containing lipids and copolymers is well-known, the membranes' overall stability, limited by the lipid part, is hindering the technological applications. Here, we introduce a fully synthetic planar membrane undergoing phase separation into domains embedded within a continuous phase. The mono- and bilayer membranes are composed of two amphiphilic diblock copolymers (PEO 45 - b -PEHOx 20 and PMOXA 10 - b -PDMS 25 ) with distinct properties and mixed at various concentrations. The molar ratio of the copolymers in the mixture and the nature of the solid support were the key parameters inducing nanoscale phase separation of the planar membranes. The size of the domains and resulting morphology of the nanopatterned surfaces were tailored by adjusting the molar ratios of the copolymers and transfer conditions. Our approach opens new avenues for the development of biomimetic planar membranes with a nanoscale texture.

Artificial membranes, as materials with biomimetic properties, can be applied in various fields, such as drug screening or bio-sensing. The solvent-assisted method (SA) represents a straightforward method to prepare lipid solid-supported membranes. It overcomes the main limitations of established membrane preparation methods, such as Langmuir-Blodgett (LB) or vesicle fusion. However, it has not yet been applied to create artificial membranes based on amphiphilic block copolymers, despite their enhanced mechanical stability compared to lipid-based membranes and bio-compatible properties. Here, we applied the SA method on different amphiphilic di- and triblock poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PDMS- b -PMOXA) copolymers and optimized the conditions to prepare artificial membranes on a solid support. The real-time membrane formation, the morphology, and the mechanical properties have been evaluated by a combination of atomic force microscopy and quartz crystal microbalance. Then, selected biomolecules including complementary DNA strands and an artificial deallylase metalloenzyme (ADAse) were incorporated into these membranes relying on the biotin-streptavidin technology. DNA strands served to establish the capability of these synthetic membranes to interact with biomolecules by preserving their correct conformation. The catalytic activity of the ADAse following its membrane anchoring induced the functionality of the biomimetic platform. Polymer membranes on solid support as prepared by the SA method open new opportunities for the creation of artificial membranes with tailored biomimetic properties and functionality.

Controllable attachment of proteins to material surfaces is very attractive for many applications including biosensors, bioengineered scaffolds or drug screening. Especially, redox proteins have received considerable attention as a model system not only to understand the mechanism of electron transfer in biological systems, but also the development of novel biosensors. However, current research attempts suffer from denaturation of the protein after its attachment to solid substrates. Here, we present how lipid, polymer and hybrid membranes based on mixtures of lipids and copolymers on a solid support provide a more favorable environment to drive selective and functional attachment of a model redox protein, cytochrome  c (cyt c ). Polymer membranes provided chemical versatility to support covalent attachment of cyt c , whereas lipid membranes provided flexibility and biocompatibility to support insertion of cyt c through its hydrophobic part. Hybrid membranes combine the most promising characteristics of both lipids and polymers and allowed attachment of cyt  c with both covalent attachment and insertion driven by hydrophobic interactions. We then investigated the effect of different attachment strategies on the accessibility and peroxidase-like activity of cyt c , in the presence of different membranes. The real-time combination of cyt c with the planar membranes was investigated by quartz crystal microbalance with dissipation. It was possible to selectively drive the insertion of cyt c into a specific lipid domain of hybrid membranes. In addition, protein accessibility and its functionality were dependent on the specificity of the combination strategy: covalent conjugation of cyt c to polymer and hybrid membranes promoted higher accessibility and supported higher peroxidase-like activity. Taking together, the combination of biomolecules with planar membranes can be modulated in such a way to improve the accessibility of the biomolecules and their resulting functionality for the development of efficient "active surfaces".

Biomembranes play a crucial role in a multitude of biological processes, where high selectivity and efficiency are key points in the reaction course. The outstanding performance of biological membranes is based on the coupling between the membrane and biomolecules, such as membrane proteins. Polymer-based membranes and assemblies represent a great alternative to lipid ones, as their presence not only dramatically increases the mechanical stability of such systems, but also opens the scope to a broad range of chemical functionalities, which can be fine-tuned to selectively combine with a specific biomolecule. Tethering the membranes or nanoassemblies on a solid support opens the way to a class of functional surfaces finding application as sensors, biocomputing systems, molecular recognition, and filtration membranes. Herein, the design, physical assembly, and biomolecule attachment/insertion on/within solid-supported polymeric membranes and nanoassemblies are presented in detail with relevant examples. Furthermore, the models and applications for these materials are highlighted with the recent advances in each field., (© 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

This review aims to summarize the advance in the field of nanosensors based on two particular materials: polymer vesicles (polymersomes) and polymer planar membranes. These two types of polymer-based structural arrangements have been shown to be efficient in the production of sensors as their features allow to adapt to different environment but also to increase the sensitivity and the selectivity of the sensing device. Polymersomes and planar polymer membranes offer a platform of choice for a wide range of chemical functionalization and characteristic structural organization which allows a convenient usage in numerous sensing applications. These materials appear as great candidates for such nanosensors considering the broad variety of polymers. They also enable the confection of robust nanosized architectures providing interesting properties for numerous applications in many domains ranging from pollution to drug monitoring. This report gives an overview of these different sensing strategies whether the nanosensors aim to detect chemicals, biological or physical signals.

Functional surfaces were generated by a combination of enzymes with polymer membranes composed of an amphiphilic, asymmetric block copolymer poly(ethyleneglycol)- block-poly(γ-methyl-ε-caprolactone)- block-poly[(2-dimethylamino)ethylmethacrylate]. First, polymer films formed at the air-water interface were transferred in different sequences onto silica solid support using the Langmuir-Blodgett technique, generating homogeneous monolayers and bilayers. A detailed characterization of these films provided insight into their properties (film thickness, wettability, topography, and roughness). On the basis of these findings, the most promising membranes were selected for enzyme attachment. Functional surfaces were then generated by the adsorption of two model enzymes that can convert phenol and its derivatives (laccase and tyrosinase), well known as high-risk pollutants of drinking and natural water. Both enzymes preserved their activity upon immobilization with respect to their substrates. Depending on the properties of the polymer films, different degrees of enzymatic activity were observed: bilayers provided the best conditions in terms of both overall stability and enzymatic activity. The interaction between amphiphilic triblock copolymer films and enzymes is exploited to engineer "active surfaces" with specific functionalities and high efficacy resulting from the intrinsic activity of the biomolecules that is preserved by an appropriate synthetic environment.

The design of functional systems with sizes in the nanometer range is a key challenge in fields such as biomedicine, nanotechnology, and engineering. Some of the most promising materials nowadays consist of self-assembling peptides or peptide-polymer hybrid materials because of their versatility and the resulting properties that can be achieved with these structures. Self-assembly of pure amphiphilic peptides or in combination with block copolymers results in a large variety of nanostructures (micelles, nanoparticles (NPs), compartments, planar membranes) each with different characteristics and tunable properties. Here, we describe such novel peptide- or peptide-polymer-based supramolecular nanostructures and emphasize their functionality and various promising applications.

We describe an innovative strategy to generate catalytic compartments with triggered functionality at the nanoscale level by combining pH-reversible biovalves and enzyme-loaded synthetic compartments. The biovalve has been engineered by the attachment of stimuli-responsive peptides to a genetically modified channel porin, enabling a reversible change of the molecular flow through the pores of the porin in response to a pH change in the local environment. The biovalve functionality triggers the reaction inside the cavity of the enzyme-loaded compartments by switching the in situ activity of the enzymes on/off based on a reversible change of the permeability of the membrane, which blocks or allows the passage of substrates and products. The complex functionality of our catalytic compartments is based on the preservation of the integrity of the compartments to protect encapsulated enzymes. An increase of the in situ activity compared to that of the free enzyme and a reversible on/off switch of the activity upon the presence of a specific stimulus is achieved. This strategy provides straightforward solutions for the development of catalytic nanocompartments efficiently producing desired molecules in a controlled, stimuli-responsive manner with high potential in areas, such as medicine, analytical chemistry, and catalysis.

MRI is a sought-after, noninvasive tool in medical diagnostics, yet the direct application of contrast agents to tissue suffers from several drawbacks. Hosting the contrast agents in polymeric nanocarriers can solve many of these issues while creating additional benefit through exploitation of the intrinsic characteristics of the polymeric carriers. In this report, the versatility is highlighted with recent examples of dendritic and hyperbranched polymers, polymer nanoparticles and micelles, and polymersomes as multifunctional bioresponsive nanocarriers for MRI contrast agents.

Simple cyclic disulfides under high tension mediate the uptake of giant substrates, that is, liposomes and polymersomes with diameters of up to 400 nm, into HeLa Kyoto cells. To place them at the surface of the vesicles, the strained disulfides were attached to the head-group of cationic amphiphiles. Bell-shaped dose response curves revealed self-activation of the strained amphiphiles by self-assembly into microdomains at low concentrations and self-inhibition by micelle formation at high concentrations. Poor colocalization of internalized vesicles with endosomes, lysosomes, and mitochondria indicate substantial release into the cytosol. The increasing activity with disulfide ring tension, inhibition with Ellman's reagent, and inactivity of maleimide and guanidinium controls outline a distinct mode of action that deserves further investigation and is promising for practical applications., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Self-organization of nanocomponents was mainly focused on solid nanoparticles, quantum dots, or liposomes to generate complex architectures with specific properties, but intrinsically limited or not developed enough, to mimic sophisticated structures with biological functions in cells. Here, we present a biomimetic strategy to self-organize synthetic nanocompartments (polymersomes) into clusters with controlled properties and topology by exploiting DNA hybridization to interconnect polymersomes. Molecular and external factors affecting the self-organization served to design clusters mimicking the connection of natural organelles: fine-tune of the distance between tethered polymersomes, different topologies, no fusion of clustered polymersomes, and no aggregation. Unexpected, extended DNA bridges that result from migration of the DNA strands inside the thick polymer membrane (about 12 nm) represent a key stability and control factor, not yet exploited for other synthetic nano-object networks. The replacement of the empty polymersomes with artificial organelles, already reported for single polymersome architecture, will provide an excellent platform for the development of artificial systems mimicking natural organelles or cells and represents a fundamental step in the engineering of molecular factories.

We introduce active surfaces generated by immobilizing protein-polymer nanoreactors on a solid support for sensitive sugar alcohols detection. First, such selective nanoreactors were engineered in solution by simultaneous encapsulation of specific enzymes in copolymer polymersomes, and insertion of membrane proteins for selective conduct of sugar alcohols. Despite the artificial surroundings, and the thickness of the copolymer membrane, functionality of reconstituted Escherichia coli glycerol facilitator (GlpF) was preserved, and allowed selective diffusion of sugar alcohols to the inner cavity of the polymersome, where encapsulated ribitol dehydrogenase (RDH) enzymes served as biosensing entities. Ribitol, selected as a model sugar alcohol, was detected quantitatively by the RDH-nanoreactors with GlpF-mediated permeability in a concentration range of 1.5-9 mM. To obtain "active surfaces" for detecting sugar alcohols, the nanoreactors optimized in solution were then immobilized on a solid support: aldehyde groups exposed at the compartment external surface reacted via an aldehyde-amino reaction with glass surfaces chemically modified with amino groups. The nanoreactors preserved their architecture and activity after immobilization on the glass surface, and represent active biosensing surfaces for selective detection of sugar alcohols, with high sensitivity., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Biological membranes play an essential role in living organisms by providing stable and functional compartments, preserving cell architecture, whilst supporting signalling and selective transport that are mediated by a variety of proteins embedded in the membrane. However, mimicking cell membranes - to be applied in artificial systems - is very challenging because of the vast complexity of biological structures. In this respect a highly promising strategy to designing multifunctional hybrid materials/systems is to combine biological molecules with polymer membranes or to design membranes with intrinsic stimuli-responsive properties. Here we present supramolecular polymer assemblies resulting from self-assembly of mostly amphiphilic copolymers either as 3D compartments (polymersomes, PICsomes, peptosomes), or as planar membranes (free-standing films, solid-supported membranes, membrane-mimetic brushes). In a bioinspired strategy, such synthetic assemblies decorated with biomolecules by insertion/encapsulation/attachment, serve for development of multifunctional systems. In addition, when the assemblies are stimuli-responsive, their architecture and properties change in the presence of stimuli, and release a cargo or allow "on demand" a specific in situ reaction. Relevant examples are included for an overview of bioinspired polymer compartments with nanometre sizes and membranes as candidates in applications ranging from drug delivery systems, up to artificial organelles, or active surfaces. Both the advantages of using polymer supramolecular assemblies and their present limitations are included to serve as a basis for future improvements.

Reactions inside confined compartments at the nanoscale represent an essential step in the development of complex multifunctional systems to serve as molecular factories. In this respect, the biomimetic approach of combining biomolecules (proteins, enzymes, mimics) with synthetic membranes is an elegant way to create functional nanoreactors, or even simple artificial organelles, that function inside cells after uptake. Functionality is provided by the specificity of the biomolecule(s), whilst the synthetic compartment provides mechanical stability and robustness. The availability of a large variety of biomolecules and synthetic membranes allows the properties and functionality of these reaction spaces to be tailored and adjusted for building complex self-organized systems as the basis for molecular factories.

Malaria is an infectious disease that needs to be addressed using innovative approaches to counteract spread of drug resistance and to establish or optimize vaccination strategies. With our approach, we aim for a dual action with drug- and 'vaccine-like' activity against malaria. By inhibiting entry of malaria parasites into host red blood cells (RBCs) - using polymer vesicle-based (polymersome) nanomimics of RBC membranes - the life cycle of the parasite is interrupted and the exposed parasites are accessible to the host immune system. Here, we describe how host cell-sized RBC membrane mimics, formed with the same block copolymers as nanomimics, also bind the corresponding malaria parasite ligand and whole malaria parasites, similar to nanomimics. This was demonstrated using fluorescence imaging techniques and confirms the suitability of giant polymersomes (GUVs) as simple mimics for RBC membranes.

Polymer conjugation for protein-based therapeutics has been developed extensively, but it still suffers from conjugation leading to decrease in protein activity and generates complexes with limited diversity due to general classical systems only incorporating one protein per each complex. Here we introduce a site-specific noncovalent protein-polymer conjugation, which can reduce the heterogeneity of the conjugates without disrupting protein function, while allowing for the modulation of binding affinity and stability, affecting the pH dependent binding of the number of proteins per polymer. We compared classical one protein-polymer conjugates with multiple protein-polymer conjugates using His-tagged enhanced yellow fluorescence protein (His6-eYFP) and metal-coordinated tris-nitrilotriacetic acid (trisNTA-Me(n+)) in a site-specific way. trisNTA-Me(n+)-His6 acts as a reversible linker with pH-triggered release of functional protein from the trisNTA-functionalized copolymers. The nature of the selected Me(n+) and number of available trisNTA-Me(n+) on poly(N-isopropylacrylamide-co-tris-nitrilotriacetic acid acrylamide) (PNTn) copolymers enables predictable modulation of the conjugates binding affinity (0.09-1.35 μM), stability, cell toxicity, and pH responsiveness. This represents a promising platform that allows direct control over the properties of multiple protein-polymer conjugates compared to the classical single protein-polymer conjugates.

Polymeric nanostructures obtained through self-assembly of reduction-sensitive amphiphilic triblock copolymers were investigated as potential drug delivery systems. The characteristic feature of these polymers is their cleavable disulfide bond in the center of the hydrophobic block. Therefore, the triblock copolymers can be cleaved into amphiphilic diblock copolymers. A poly(2-hydroxyethyl methacrylate)-b-poly(butyl methacrylate)-S-S-poly(butyl methacrylate)-b-poly(2-hydroxyethyl methacrylate) (PHEMA-b-(PBMA-S-S-PBMA)-b-PHEMA) triblock copolymer was synthesized. It self-assembled into micelles which were used to encapsulate hydrophobic dye molecules (Nile Red, BodiPy 630/650) as model payloads. The self-assembled nanostructures disintegrated upon reduction of the disulfide bond, releasing their cargo and yielding larger particles that formed aggregates in solution after 24 h. A burst release of payload was shown within the first 15 min, followed by a constant release over several hours. As concentration gradients of reducing agents are commonly found in biological systems, the micelles could be used as redox-sensitive nanocarriers for the intracellular delivery of drugs., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A promising approach for addressing a range of diseases lies in the delivery of functional biomacromolecules such as nucleic acids or proteins to cells. Polymers, peptides and the different shapes accessible through self-assembly of polymeric and peptidic amphiphiles have been widely explored as carriers and as containers for reactions on the nanoscale. These building blocks are particularly interesting, because several essential parameters such as physical characteristics, conditions for degradation or biocompatibility can be tuned to suit specific requirements. In this review, different three-dimensional architectures ranging from dendrimers and hyperbranched molecules to micelles, vesicles and nanoparticles assembled from synthetic polymers and peptides are discussed. It is focused on their function as a carrier for biologically active macromolecules, highlighting seminal examples from the current literature and pointing out the remaining and upcoming challenges in this important area of research.

We designed and prepared nanoreactors based on a poly(2-methyloxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyloxazoline (PMOXA-b-PDMS-b-PMOXA) amphiphilic triblock copolymer encapsulating the enzyme penicillin acylase for local and controlled production of antibiotics.

2D/3D structures resulting from self-assembly of amphiphilic block copolymers can be combined with bioactive compounds, such as proteins and enzymes, to create supramolecular assemblies with specific desired properties and functionality. Chemical tuning of the architecture and properties of supramolecular assemblies to accommodate sensitive biomolecules allows the development of new soft hybrid materials that benefit from the robustness of polymers and from the functionality of biomolecules. The encapsulation/insertion of biomolecules (enzymes, mimics, proteins) in self-assembling block copolymer vesicles enables design of 'nanoreactors' both in solutions and at surfaces for highly diverse applications, ranging from production of antibiotics to creation of artificial organelles. When membrane proteins are inserted into polymer membranes, it is possible to generate functional membranes or active surfaces with a rapid and specific response. In addition, the selective binding of ligand-terminated polymers holds potential for targeted delivery of drugs, or for immobilization on solid support, to provide functional 3D assemblies on an extended surface.

This review focuses on smart nano-materials built of stimuli-responsive (SR) polymers and will discuss their numerous applications in the biomedical field. The authors will first provide an overview of different stimuli and their corresponding, responsive polymers. By introducing myriad functionalities, SR polymers present a wide range of possibilities in the design of stimuli-responsive devices, making use of virtually all types of polymer constructs, from self-assembled structures (micelles, vesicles) to surfaces (polymer brushes, films) as described in the second section of the review. In the last section of this review the authors report on some of the most promising applications of stimuli-responsive polymers in nanomedicine. In particular, we will discuss applications pertaining to diagnosis, where SR polymers are used to construct sensors capable of selective recognition and quantification of analytes and physical variables, as well as imaging devices. We will also highlight some examples of responsive systems used for therapeutic applications, including smart drug delivery systems (micelles, vesicles, dendrimers...) and surfaces for regenerative medicine.

We present a model system to demonstrate that the positioning of biomolecules (membrane proteins) in a nonnative, complex thin film environment can be regulated by the phase behavior of film components. Partial separation between an amphiphilic polymer and a lipid drives the protein to a fluid phase, mechanically more similar to a cellular bilayer.

A highly permeable yet highly selective pore-spanning biomimetic membrane embedded with aquaporin Z is molecularly designed and constructed via a combination of pressure-assisted vesicle adsorption and covalent-conjugation-driven vesicle fusion on a porous support. This approach represents a significant breakthrough in the architecture of biomimetic membranes embedded with aquaporin in a planar form., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Major challenges that confront nanoscience in medicine today include the development of efficacious therapies with minimum side effects, diagnostic methods featuring significantly higher sensitivities and selectivities, and personalized diagnostics and therapeutics for theragnostic approaches. With these goals in mind, combining biological molecules and synthetic carriers/templates, such as polymer supramolecular assemblies, represents a very promising strategy. In this critical review, we present protein-polymer systems as reaction spaces at the nano-scale in which the enzymatic reactions take place inside polymer supramolecular assembly, at its interface with the environment or in a combination of both. The location of the protein(s) with respect to the polymer assembly generates a diversity of systems ranging from nanoreactors to active enzymatic polymer surfaces. We describe these both in terms of general modelling and addressing the specific conditions and requirements related to the medical domain. We will particularly present protein-polymer nanoreactors that provide protected spaces for enzymatic reactions. We also show how polymer supramolecular structures, such as micelles, capsules, dendrimers and vesicles, can accommodate sensitive biomolecules to mimic natural systems and functions, and to serve as avenues for new medical approaches. Even though not yet on the market, we will emphasize possible applications of protein-polymer systems that generate reaction nanospaces-as novel ways to advanced medicine (264 references).

We demonstrate that membranes consisting of certain triblock-copolymers were tight for CO₂. Using a novel approach, we provide evidence for aquaporin facilitated CO₂ diffusion. Plant aquaporins obtained from heterologous expression were inserted into triblock copolymer membranes. These were employed to separate a chamber with a solution maintaining high CO₂ concentrations from one with depleted CO₂ concentrations. CO₂ diffusion was detected by measuring the pH change resulting from membrane CO₂ diffusion from one chamber to the other. An up to 21 fold increase in diffusion rate was determined. Besides the supply of this proof of principle, we could provide additional arguments in favour of protein facilitated CO₂ diffusion to the vivid on-going debate about the principles of membrane gas diffusion in living cells.

One strategy in modern medicine is the development of new platforms that combine multifunctional compounds with stable, safe carriers in patient-oriented therapeutic strategies. The simultaneous detection and treatment of pathological events through interactions manipulated at the molecular level offer treatment strategies that can decrease side effects resulting from conventional therapeutic approaches. Several types of nanocarriers have been proposed for biomedical purposes, including inorganic nanoparticles, lipid aggregates, including liposomes, and synthetic polymeric systems, such as vesicles, micelles, or nanotubes. Polymeric vesicles--structures similar to lipid vesicles but created using synthetic block copolymers--represent an excellent candidate for new nanocarriers for medical applications. These structures are more stable than liposomes but retain their low immunogenicity. Significant efforts have been made to improve the size, membrane flexibility, and permeability of polymeric vesicles and to enhance their target specificity. The optimization of these properties will allow researchers to design smart compartments that can co-encapsulate sensitive molecules, such as RNA, enzymes, and proteins, and their membranes allow insertion of membrane proteins rather than simply serving as passive carriers. In this Account, we illustrate the advances that are shifting these molecular systems from simple polymeric carriers to smart-complex protein-polymer assemblies, such as nanoreactors or synthetic organelles. Polymeric vesicles generated by the self-assembly of amphiphilic copolymers (polymersomes) offer the advantage of simultaneous encapsulation of hydrophilic compounds in their aqueous cavities and the insertion of fragile, hydrophobic compounds in their membranes. This strategy has permitted us and others to design and develop new systems such as nanoreactors and artificial organelles in which active compounds are simultaneously protected and allowed to act in situ. In recent years, we have created a variety of multifunctional, proteinpolymersomes combinations for biomedical applications. The insertion of membrane proteins or biopores into the polymer membrane supported the activity of co-encapsulated enzymes that act in tandem inside the cavity or of combinations of drugs and imaging agents. Surface functionalization of these nanocarriers permitted specific targeting of the desired biological compartments. Polymeric vesicles alone are relatively easy to prepare and functionalize. Those features, along with their stability and multifunctionality, promote their use in the development of new theranostic strategies. The combination of polymer vesicles and biological entities will serve as tools to improve the observation and treatment of pathological events and the overall condition of the patient.

In various pathological conditions an advantage may be gained by reinforcing an intrinsic organismal response. This can be achieved, for example, by enzyme replacement therapy, which can amplify specific, intrinsic activities of the organelles. In this respect, polymeric nanoreactors composed of vesicles that encapsulate an enzyme or a combination of enzymes in their cavities represent a novel approach in therapeutic applications because they behave like simplified organelles. As compartments, polymeric vesicles possess a membrane that is more stable than the corresponding lipid membrane of liposomes, with the dual role of protecting enzymes and simultaneously allowing them to act in situ. A complex scenario of requirements must be fulfilled by enzyme-containing polymeric nanoreactors if they are to function under biological conditions and serve to model organelles. Nanoreactors are described here in terms of the existing models and the challenges faced in developing artificial organelles for therapeutic applications. We will focus on describing how polymeric vesicles can be used to provide a protected compartment for enzymatic reactions, and serve as simplified organelles inside cells., (Copyright © 2011 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.)

Vesicles assembled from amphiphilic block copolymers represent promising nanomaterials for applications that include drug delivery and surface functionalization. One essential requirement to guide such polymersomes to a desired site in vivo is conjugation of active, targeting ligands to the surface of preformed self-assemblies. Such conjugation chemistry must fulfill criteria of efficiency and selectivity, stability of the resulting bond, and biocompatibility. We have here developed a new system that achieves these criteria by simple conjugation of 4-formylbenzoate (4FB) functionalized polymersomes with 6-hydrazinonicotinate acetone hydrazone (HyNic) functionalized antibodies in aqueous buffer. The number of available amino groups on the surface of polymersomes composed of poly(dimethylsiloxane)-block-poly(2-methyloxazoline) diblock copolymers was investigated by reacting hydrophilic succinimidyl-activated fluorescent dye with polymersomes and evaluating the resulting emission intensity. To prove attachment of biomolecules to polymersomes, HyNic functionalized enhanced yellow fluorescent protein (eYFP) was attached to 4FB functionalized polymersomes, resulting in an average number of 5 eYFP molecules per polymersome. Two different polymersome-antibody conjugates were produced using either antibiotin IgG or trastuzumab. They showed specific targeting toward biotin-patterned surfaces and breast cancer cells. Overall, the polymersome-ligand platform appears promising for therapeutic and diagnostic use.

Interactions in binary mixed monolayers from lipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and amphiphilic poly(2-methyloxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyloxazoline) block copolymers were studied by using the Langmuir balance technique and Brewster angle microscopy. It is shown that monolayers from the saturated lipid (DPPC) are more sensitive to the presence of polymers in the film, resulting in phase separation and the formation of pure lipid domains at high surface pressure. The morphology and composition of such phase-separated lipid-polymer films were studied by fluorescence microscopy and ToF-SIMS. In contrast, in DOPC-containing monolayers, the polymers tend to phase-separate at low surface pressures only and homogeneous films are obtained upon further compression, due to higher lipid fluidity. The analysis of excess energy of mixing shows that while the separation effect in densely packed DPPC-containing films is strongly dependent on the polymer size (with the larger polymer having a much stronger influence), in the case of monolayers with DOPC much smaller effects are observed. The results are discussed in terms of the monolayer composition, lipid fluidity, and polymer size.

Purpose: The main goal of this study was to show the long-term stability of vesicles from poly(2-methyl oxazoline-block-polydimethylsiloxane-block poly(2-methyl oxazoline) (PMOXA-PDMS-PMOXA) in PBS, blood plasma and the feasibility to use these vesicles for drug release from PVA hydrogels., Methods: The vesicle formation properties and loading efficiency was evaluated using fluorescent dyes. The stability of the vesicles was evaluated in buffer at pH 7 at room temperature and in 50% blood plasma at 37 degrees C. The calcein loaded vesicles were dispersed in a UV crosslinked PVA hydrogel. The stability of the vesicles in the hydrogel was observed over one week, before the vesicles were ruptured with Triton X-100., Results: The vesicles are very stable in buffer, blood plasma, and the PVA hydrogel. In plasma 50% of the calcein is released in 48 h in the presence of sodium azide. The vesicles can be evenly dispersed in PVA and are stable. The release can be triggered and the calcein diffuses afterwards quickly throughout the gel., Conclusion: Polymeric vesicles can be used as diffusion barrier in hydrogels for the controlled release of water soluble drugs.

Immobilizing biomolecules provides the advantage of observing them individually for extended time periods, which is impossible to accomplish for freely diffusing molecules in solution. In order to immobilize individual protein molecules, we encapsulated them in polymeric vesicles made of amphiphilic triblock copolymers and tethered the vesicles to a cover slide surface. A major goal of this study is to investigate polymeric vesicles with respect to their suitability for protein-folding studies. The fact that polymeric vesicles possess an extreme stability under various chemical conditions is supported by our observation that harsh unfolding conditions do not perturb the structural integrity of the vesicles. Moreover, polymerosomes prove to be permeable to GdnHCl and, thereby, ideally suited for unfolding and refolding studies with encapsulated proteins. We demonstrate this with encapsulated phosphoglycerate kinase, which was fluorescently labeled with Atto655, a dye that exhibits pronounced photoinduced electron transfer (PET) to a nearby tryptophan residue in the native state. Under unfolding conditions, PET was reduced, and we monitored alternating unfolding and refolding conditions for individual encapsulated proteins.

Polymeric formulations (micelles, vesicles etc.) have emerged as versatile drug carriers due to their increased stability, site specificity, blood circulation resistance and thus overall potential therapeutic effects compared to liposomes. Furthermore, stimuli-responsive systems have been developed whose properties change after applying certain external triggers. Polymersomes are mainly composed of amphiphilic block copolymers that are held together in water due to strong physical interactions between the insoluble hydrophobic blocks, thus forming a bilayer morphology or, in the case of triblock copolymers, a bilayer-like morphology. Formation and destabilization of these assemblies is a consequence of external stimuli (temperature, pH, oxidation/reduction conditions etc.). This review focuses on recent developments concerning stimuli- responsive polymersomes made of amphiphilic block copolymers and their potential applications within the biomedical field.

The properties of amphiphilic block copolymer membranes can be tailored within a wide range of physical parameters. This makes them promising candidates for the development of new (bio)sensors based on solid-supported biomimetic membranes. Here we investigated the interfacial adsorption of polyelectrolyte vesicles on three different model substrates to find the optimum conditions for formation of planar membranes. The polymer vesicles were made from amphiphilic ABA triblock copolymers with short, positively charged poly(2,2-dimethylaminoethyl methacrylate) (PDMAEMA) end blocks and a hydrophobic poly( n-butyl methacrylate) (PBMA) middle block. We observed reorganization of the amphiphilic copolymer chains from vesicular structures into a 1.5+/-0.04 nm thick layer on the hydrophobic HOPG surface. However, this film starts disrupting and dewetting upon drying. In contrast, adsorption of the vesicles on the negatively charged SiO2 and mica substrates induced vesicle fusion and formation of planar, supported block copolymer films. This process seems to be controlled by the surface charge density of the substrate and concentration of the block copolymers in solution. The thickness of the copolymer membrane on mica was comparable to the thickness of phospholipid bilayers.

A series of block copolymers containing a dendronised cationic block for efficient DNA binding and a poly(ethylene glycol) block for encapsulation of the complex were synthesised in a modular fashion using a combination of click chemistry and ring-opening metathesis polymerisation. DNA binding experiments, investigated using gel electrophoresis, dynamic light scattering and transmission electron microscopy, showed that all polymers prepared in this study strongly complex DNA and self-assemble into polyion complex micelles with apparent hydrodynamic radii ranging from 20-120 nm at physiological pH (7.4). The in vitro transfection efficiency and toxicity of these potential non-viral vectors were also evaluated in HeLadouble dagger cells using plasmid DNA encoding for green fluorescent protein as the reporter gene.

Cell organelles are subcellular structures characterized by specific functionalities. They often consist of membrane-delineated microcompartments with a unique set of enzymes. Here we report the design of synthetic organelles based on nanometer-sized polymer vesicles, show their introduction into cells in a target-specific fashion, document their intact biochemical functionality in the cellular environment, and study their intracellular trafficking. This novel paradigm of introducing polymer-based artificial organelles to specific target cells for expansion of their biochemical capabilities appears suited for biomedical applications such as enzyme replacement in genetic diseases or, more generically, to add a desired biochemical function to a cell.

The permeability and solute transport characteristics of amphiphilic triblock-polymer vesicles containing the bacterial water-channel protein Aquaporin Z (AqpZ) were investigated. The vesicles were made of a block copolymer with symmetric poly-(2-methyloxazoline)-poly-(dimethylsiloxane)-poly-(2-methyloxazoline) (PMOXA(15)-PDMS(110)-PMOXA(15)) repeat units. Light-scattering measurements on pure polymer vesicles subject to an outwardly directed salt gradient in a stopped-flow apparatus indicated that the polymer vesicles were highly impermeable. However, a large enhancement in water productivity (permeability per unit driving force) of up to approximately 800 times that of pure polymer was observed when AqpZ was incorporated. The activation energy (E(a)) of water transport for the protein-polymer vesicles (3.4 kcal/mol) corresponded to that reported for water-channel-mediated water transport in lipid membranes. The solute reflection coefficients of glucose, glycerol, salt, and urea were also calculated, and indicated that these solutes are completely rejected. The productivity of AqpZ-incorporated polymer membranes was at least an order of magnitude larger than values for existing salt-rejecting polymeric membranes. The approach followed here may lead to more productive and sustainable water treatment membranes, whereas the variable levels of permeability obtained with different concentrations of AqpZ may provide a key property for drug delivery applications.

Amphiphilic di- and triblock copolymers having different hydrophilic-to-hydrophobic block length ratio were synthesized using ATRP. The self-assembly behavior of these AB and ABA block copolymers consisting of poly(n-butyl methacrylate) (B) and poly(2,2-(dimethylaminoethyl methacrylate) (A) was investigated using a combination of dynamic light scattering, negative-stain transmission electron microscopy, cryoelectron microscopy, and atomic force microscopy. Two populations of self-organized structures in aqueous solution, micelles and compound micelles, were detected for diblock copolymers. Triblock copolymers assembled into vesicular structures of uniform sizes. Furthermore it was found that these vesicles tended to compensate the high curvature by additional organization of the polymer chains outside of the membrane. The chain hydrophilicity of the polymers appeared to have a critical impact on the self-assembly response toward temperature change. The self-reorganization of the polymers at different temperatures is discussed.

To develop an intelligent sensor-effector functionality on the nanoscale, a pH-switchable, controlled nanoreactor based on amphiphilic copolymer membranes was built. The nanovesicles were equipped with bacterial transmembrane ompF pore proteins and the pH-sensitive enzyme acid phosphatase, resulting in a switchable substrate processing at pH 4-6.5. Ideal pH and substrate concentrations for the reaction were determined experimentally. In future, the reactor might be used for self-regulating targeted diagnostic and therapeutic applications in medicine.

The behavior of binary monolayers from PMOXA-PDMS-PMOXA triblock copolymers and alamethicin, an antimicrobial peptide, was investigated in the context of formation of novel biocomposite nanostructured materials. The properties of mixed monolayers were studied by surface pressure-area isotherms and Brewster angle imaging. As reported previously, functionality of alamethicin relies on its aggregation properties in lipid mono- and bilayers. This is also the case in polymer matrixes, however, here the mixing properties differ from lipid-peptide systems due to the polymers' structural specificity. The peptide influence on the polymer films is provided in detail for the first time, and supported by the compressibility data to asses the elastic properties of such composite membranes.

Nanocontainers (NCs) were prepared from amphiphilic triblock copolymers, having an average molecular weight of around 8000 g/mol, by using previously published preparation methods consisting of dispersing the polymer in an aqueous buffer solution containing molecules for encapsulation. A small molecular weight fluorophore, sulforhodamine B, as well as the fluorescent protein avidin labeled with Alexa 488 were encapsulated, and the resulting nanocontainers were characterized using fluorescence correlation spectroscopy (FCS) and fluorescence cross-correlation spectroscopy (FCCS). Nanocontainer size determination by FCS is very robust and compares well with results obtained from photon correlation spectroscopy: the measured diameters of the polymeric nanocontainers vary between 140 and 172 nm. Encapsulation of fluorescent molecules was determined by evaluating the molecular brightness of nanocontainers with an encapsulated fluorescently labeled protein (avidin-Alexa 488). Results indicate that the number of encapsulated avidin-Alexa 488 molecules corresponds well with the initial concentration of the fluorescently labeled protein and the encapsulated volume. A nanocontainer binding assay was developed using biotinylated fluorescently labeled nanocontainers. Binding of biotinylated nanocontainers to fluorescently labeled streptavidin was followed by fluorescence cross-correlation spectroscopy. The intrinsic dissociation constant, K(d), of labeled streptavidin to the ligand-modified nanocontainers is 1.7 +/- 0.4 x 10(-8) M, and about 1921 +/- 357 molecules of labeled streptavidin are bound to each nanocontainer.

Amphiphilic ABA triblock copolymers, such as poly(2-methyloxazoline)-block-poly(dimethylsiloxan)-block-poly(2-methyloxazoline) (PMOXA-PDMS-PMOXA), form vesicular structures. Here, the interaction of these ABA molecules with lipids is investigated by electron microscopy, fluorescence spectroscopy, light scattering, and differential scanning calorimetry. Our observations suggest the formation of homogeneous mixed polymer-lipid composites, independent of preparation method, i.e. film hydration, dispersion, or detergent removal. When ABA polymersomes and liposomes are mixed, we observed monomer exchanges on a time scale of minutes. The possibility of forming mixed structures and the exchanges between preformed structures allow the combination of the properties of lipids and polymers such as stability and loading encapsulation capacity.

Asymmetric molecules and materials provide an important basis for the organization and function of biological systems. It is well known that, for example, the inner and outer leaflets of biological membranes are strictly asymmetric with respect to lipid composition and distribution. This plays a crucial role for many membrane-related processes like carrier-mediated transport or insertion and orientation of integral membrane proteins. Most artificial membrane systems are, however, symmetric with respect to their midplane and membrane proteins are incorporated with random orientation. Here we describe a new approach to induce a directed insertion of membrane proteins into asymmetric membranes formed by amphiphilic ABC triblock copolymers with two chemically different water-soluble blocks A and C. In a comparative study we have reconstituted His-tag labeled Aquaporin 0 in lipid, ABA block copolymer, and ABC block copolymer vesicles. Immunolabeling, colorimetric, and fluorescence studies clearly show that a preferential orientation of the protein is only observed in the asymmetric ABC triblock copolymer membranes.

We present a DNA-containing polymeric nanocontainer using the self-assembled superstructure of amphiphilic block copolymers in aqueous solutions. To demonstrate that DNA translocation is possible across a completely synthetic block copolymer membrane, we have used a phage transfection strategy as a DNA-transfer model system. For this purpose the bacterial channel forming protein LamB was reconstituted in ABA-triblock copolymer vesicles. The outer membrane protein LamB is a specific transporter for maltodextrins but also serves as a receptor for lambda phage to trigger the ejection of lambda phage DNA. We demonstrate that the functionality of the LamB protein is fully preserved despite the artificial surrounding. This leads to a type of polymeric vehicle for DNA that could be useful for gene therapy.

Self-assembly of reactive amphiphilic block copolymers is used to prepare nanostructured hydrogels with exceptional permeability properties, vesicular structures and planar, freestanding membranes in aqueous solution. Although the underlying block copolymer membranes are two-three-fold thicker than conventional lipid bilayers, they can be regarded as mimetic of biological membranes and can be used as a matrix for membrane-spanning proteins. Surprisingly, the proteins remain functional, despite the extreme thickness of the membranes and even after polymerization of the reactive block copolymers. The unique combination of block copolymers with membrane proteins allows the preparation of mechanically stable, defect-free membranes and nanocapsules that have highly selective permeability and/or specific recognition sites. This is documented by some representative examples.