Search

This paper proposes a sub-harmonic-based brushless wound rotor synchronous machine (WRSM) topology. The proposed topology involves two threephase stator windings with a different number of turns. Both windings are linked in parallel and are provided with current from a single inverter. One of these windings is a four-pole winding while the second winding is a two-pole winding. This arrangement generates a magneto-motive force (MMF) in the air-gap of the machine comprising of two components: a regular fundamental MMF and a sub-harmonic MMF. The fundamental component produces the main stator field whereas the sub-harmonic component generates a subharmonic field that is utilized to produce a harmonic current in a two-pole rotor harmonic winding. The induced harmonic current is rectified to inject direct current (DC) to the field winding and produce a four-pole rotor magnetic field. The four-pole rotor magnetic field when magnetically interacts with the same number of the main stator field poles producing torque. Finite element analysis (FEA) is carried out to confirm the operation and achieve the electromagnetic behavior of the proposed topology. [ABSTRACT FROM AUTHOR]

In this article, a new low-cost small-scale three-phase brushless motor topology is proposed. This is a new topology for self-excitation of brushless wound rotor synchronous motor investigated initially for rated speed. For brushless excitation, the stator is designed to contain two windings, namely, three-phase armature winding and exciter winding. The rotor consists of two windings, that is, harmonic winding and field winding, and a diode rectifier. An inverter feeds the three-phase armature winding which is connected in series through an uncontrolled three-phase rectifier to a single exciter winding. When the current is supplied from the inverter, both the armature and exciter windings are energized eventually producing a flux in the air gap. Since the flux produced by the exciter winding is not synchronized with the field winding, it produces a harmonic to be intercepted by the harmonic winding on the rotor. Eventually, the voltage produced in the harmonic winding is used to feed dc current to the field winding for brushless operation. The results obtained by 2-D finite-element analysis (FEA) validate the brushless operation of the motor. The proposed motor is analyzed basically for topology verification with the FEA results. Since the topology can be verified, further effort can be put to investigate such low-cost topologies for brushless wound rotor synchronous motor. It can be an alternative to a costly permanent magnet synchronous motor for specific applications. [ABSTRACT FROM AUTHOR]

This paper presents a new high-efficient three-phase brushless wound rotor synchronous machine (BL-WRSM) based on a sub-harmonic field excitation technique. In the proposed machine topology, the stator is equipped with two different three-phase windings: (1) main armature winding, and (2) additional armature winding. The main armature winding is based on a 4-pole winding configuration, whereas the additional armature winding is based on a 2-pole winding configuration. Both windings are supplied current from two different inverters, i.e., inverter-1, inverter-2, and simultaneously. Inverter-1 provides the regular input current to the main armature winding, whereas inverter-2 provides a three-phase current of low magnitude to the 2-pole additional armature winding. This generates an additional sub-harmonic component of MMF in the airgap beside the fundamental MMF. On the other side, the rotor is equipped with (1) harmonic, and (2) field windings. These windings are electrically coupled via a rectifier. The fundamental component of MMF produces the main rotating magnetic field, whereas the sub-harmonic MMF gets induced in the harmonic winding to produce harmonic current. This current is rectified to give DC to the rotor field winding to attain brushless operation. To authenticate the operation and analyze its performance, the proposed BL-WRSM topology is supported using 2-D finite element analysis (FEA) in JMAG-Designer. Later on, the performance of the proposed brushless topology is compared with the customary BL-WRSM topology to verify its high efficiency, high output torque, low torque ripple, and low unbalanced radial force on the rotor. [ABSTRACT FROM AUTHOR]

In an open-winding machine, three-phase stator currents can be controlled such that the input armature currents may contain the third-harmonic current component in addition to the fundamental. Considering this attribute of open-winding patterns, a harmonic current field excitation technique for a wound rotor synchronous machine (WRSM) is proposed in this paper based on the control of time-harmonic magneto-motive force. Two inverters connected to both terminals of the stator winding are controlled so that the input armature current generates an additional third-harmonic current component. This third-harmonic component generates a vibrating magnetic field that induces a current in the specially designed rotor harmonic winding. The current is supplied as DC current to the rotor excitation winding to generate a rotor field by using a full-bridge diode rectifier in order to achieve brushless operation. The proposed dual-inverter-controlled brushless operation for a WRSM is executed in ANSYS Maxwell using 2-D finite element analysis to validate its operation and electromagnetic performance. [ABSTRACT FROM AUTHOR]

This manuscript discusses a novel harmonic current excitation technique for a wound rotor synchronous machine based on control of the time harmonic magneto-motive force (MMF) for brushless operation. Two inverters are used to feed the armature winding in such a way that at a time, one inverter supplies the current to armature winding. The two inverters are 180° phase-shifted. The inverter assignment is based on time-division multiplexing technique to generate continuous armature currents containing reasonable third-harmonic component beside fundamental component. This third-harmonic current component generates pulsating MMF and is induced in the rotor harmonic winding; the induced current is rectified and applied to rotor field winding to generate rotor field. The rotor field interacts with armature fundamental current component for torque generation. Finite element analysis is performed to verify the idea. [ABSTRACT FROM AUTHOR]