Search

A model simulating the effluent nitrogen (N) concentration of treated animal farm wastewater in a pilot on-site constructed wetland (CW) system, using dewatered alum sludge cake (DASC) as wetland substrate, is presented. The N-model was developed based on the Structural Thinking Experiential Learning Laboratory with Animation software and is considering organic nitrogen, ammonia nitrogen (NH3) and nitrate nitrogen (NO3-N) as the major forms of nitrogen involved in the transformation chains. Ammonification (AMM), ammonia volatilization, nitrification (NIT), denitrification, plant uptake, plant decaying and uptake of inorganic nitrogen by algae and bacteria were considered in this model. pH, dissolved oxygen, temperature, precipitation, solar radiation and nitrogen concentrations were considered as forcing functions in the model. The model was calibrated by observed data with a reasonable agreement prior to its applications. The simulated effluent detritus nitrogen, NH4-N, NO3-N and TN had a considerably good agreement with the observed results. The mass balance analysis shows that NIT accounts for 65.60%, adsorption (ad) (11.90%), AMM (8.90%) followed by NH4-N (Plants) (5.90%) and NO3-N (Plants) (4.40%). The TN removal was found 52% of the total influent TN in the CW. This study suggested an improved overall performance of a DASC-based CW and efficient N removal from wastewater. [ABSTRACT FROM PUBLISHER]

Abstract: Step-feeding strategies have been extensively studied and comprehensively analyzed in this study for a four-stage alum sludge-based tidal flow constructed wetlands (AlS-TFCWs) system. Enhanced total nitrogen removal of 83% is achieved under high nitrogen loading rate of 19.1gN/m2 d. The key issues towards the success of a significant nitrogen removal in step-feeding TFCWs are the bed resting time (which provides better aeration for nitrification) and up flow stage/delayed input of side stream(s) (which ensure favorable environment for better denitrification). Simultaneous nitrification and denitrification (SND) was found effective in the 1st stage of the system and SND via nitrite is the main nitrogen conversion mechanism. The optimal influent distribution fraction for step-feeding purpose can be estimated from a theoretical basis, which is a function of the influent BCOD/TKN ratio. Therefore the influent distribution fraction should be adjusted according to the variety of influent characteristics, rather than a fixed value. [Copyright &y& Elsevier]

Abstract: Dewatered alum sludge, a widely generated by-product of drinking water treatment plants using aluminium salts as coagulants was used as main substrate in a pilot on-site constructed wetland system treating agricultural wastewater for 11months. Treatment performance was evaluated and spreadsheet analysis was used to establish correlations between water quality variables. Results showed that removal rates (in g/m2 d) of 4.6–249.2 for 5day biochemical oxygen demand (BOD5), 35.6–502.0 for chemical oxygen demand (COD), 2.5–14.3 for total phosphorus (TP) and 2.7–14.6 for phosphate (PO4 chieved. Multiple regression analysis showed that effluent BOD5 and COD can be predicted to a reasonable accuracy (R 2 =0.665 and 0.588, respectively) by using input variables which can be easily monitored in real time as sole predictor variables. This could provide a rapid and cheap alternative to such laborious and time consuming analyses and also serve as management tools for day-to-day process control. [Copyright &y& Elsevier]

Abstract: In this study, beneficial reuse of the alum-contained drinking water treatment sludge is extended into developing a novel constructed wetland system (CWs) using the alum sludge as main substrate. The study reports on the first pilot field-scale alum sludge-based CWs operated in the tidal flow mode with enhanced capacity for phosphorus and organic matter removal from animal farm wastewater. The concept of the development is presented and this is followed by the performance analysis of the first CWs of its kind. The CWs consists of four identical compartments in series operated using a tidal flow strategy with a hydraulic loading rate of 0.29m3/m2 d. First year analysis of the system''s performance shows that it is a unique and promising low-cost wastewater treatment system. The mean monthly removal efficiencies obtained were determined that ranged 57–84%, 36–84%, 11–78%, 49–93%, 75–94%, 73–97% and 46–83% for BOD5, COD, TN, NH4-N, TP, P (inorganic phosphorus) and SS, respectively. The system showed a distinct phosphorus removal and also, the system was effective in reducing levels of organics and ammonium-nitrogen. More importantly, the system showcases a novel reuse alternative for the alum sludge as opposed to its landfilling, demonstrating a win-win technique with a great potential for larger scale application. [Copyright &y& Elsevier]