Search

A method to extract accurate information on the displacement field distribution from split high-order Laue zones lines in a convergent-beam electron diffraction pattern of nanostructures has been developed. Starting from two-dimensional many beam dynamical simulation of HOLZ patterns, we assembled a recursive procedure to reconstruct the displacement field in the investigated regions of the sample, based on the best fit of a parametrized model. This recursive procedure minimizes the differences between simulated and experimental patterns, taken in strained regions, by comparing the corresponding rocking curves of a number of high-order Laue zone reflections. Due to its sensitivity to small displacement variations along the electron beam direction, this method is able to discriminate between different models, and can be also used to map a strain field component in the specimen. We tested this method in a series of experimental convergent-beam electron diffraction patterns, taken in a shallow trench isolation structure. The method presented here is of general validity and, in principle, it can be applied to any sample where not negligible strain gradients along the beam direction are present. [ABSTRACT FROM AUTHOR]

In this paper, three techniques are discussed that provide information on process-induced local mechanical stress in silicon: the convergent beam electron diffraction technique of transmission electron microscopy, X-ray micro-diffraction and micro-Raman spectroscopy. We discuss the principles of these techniques, their spatial resolution, the ease-of-use, the information that can be obtained, the required sample preparation, the measurement time, and the complementarities of these techniques. We demonstrate this for stress induced by shallow trench isolation and correlate the results to finite element analysis results. [Copyright &y& Elsevier]

The use of TiSi2 layers as ohmic contacts in complementary MOS (CMOS) devices is expected to introduce large distortions in the underlying silicon which may degrade the device performances. In this work, the TEM technique known as convergent beam electron diffraction (CBED) has been employed to map the strain distributions across 〈1 1 0〉 cross-sectional specimens of sub-quarter-micron CMOS structures. Different experimental set-ups in terms of energy filtering, liquid nitrogen cooling and zone axis have been explored and compared to each other by using three differently equipped microscopes. The strain induced on silicon by TiSi2 layers has then been investigated, quantified and compared with that due to the presence of an oxide isolation trench. Also, the effects of depositing a TiN capping layer on TiSi2 have been analysed. Our results show that its presence results in a more tensile strain without altering the strain distribution trend. [Copyright &y& Elsevier]