Search

It is our interest to design and develop a high-power pulser system employing an electrical discharge in a spark gap. The type of discharge generates short electric pulses capable of both the characteristics of a fast rise time and a high repetition rate. Such a switch pulser has wide applications in the industry. To generate the electrical discharge in the spark gap in an efficient manner is very important for the switching operation. The regime of the operation utilizes the residual plasma in the interpulse recovery of the spark gap to increase the repetition rate. Therefore, the mechanisms of the discharge in a controlled manner following the electrical breakdown of the spark gap, such as the plasma generation in the spark channel and the dielectric recovery process as well as the residual plasma in the post-spark-discharge period, are of great importance. The understanding of the type of the spark-gap discharge for the switching at a high repetition rate beyond 1 MHz has been the primary goal. The typical voltage and current ratings are below 1 kV and several amperes, respectively. In particular, this paper addresses the optimal set of several parameters, such as the spark-gap geometry, electrode gap distance, gas pressure, and gas type, in conjunction with a unique circuit scheme to drive the discharge in the controlled fashion. [ABSTRACT FROM PUBLISHER]

It is our endeavor to develop switching technology for the breakdown reliability and reproducibility at extremely high voltages above 1 MV. One of the key objectives of the endeavor is to derive precise breakdown criteria for use in high-voltage applications. We have developed empirical criteria by which the breakdown field strength of a high-pressure \SF6-filled spark gap can be computed. The validity of the computed result has been verified with several experimental data from different investigators. The computed result has shown good agreement in an extended range of pd (pressure times gap distance) and field enhancement factor of the spark gap geometry. Furthermore, a spark gap has been designed and constructed with particular intention of generating a high-pulsed-power source in Pohang Accelerator Laboratory. In parallel, field modeling has been performed to verify the appropriate shape of the highly stressed insulator and electrode design in the spark gap and to evaluate their field enhancements. A series of breakdown voltage tests has demonstrated the function of the spark gap switch as intended up to 9 bars of \SF6. Aside from this, the limitation of the switching behavior has been examined with an aim of operating the designed spark gap to its maximum capability. [ABSTRACT FROM PUBLISHER]