Search

The dimensional stability of paper during printing is crucial for ensuring production quality and runnability. However, inkjet printing faces inherent challenges due to the hygroscopic nature of paper and the use of water-based inks. Despite freshly printed sheets are flat, a considerable development of paper curl is often observed during storage. In this study, we establish the link between the migration of ink co-solvents and the long-term curl development of printed paper. A4 paper sheets were sprayed with a water-glycerol model ink and changes in the sheet's curvature were monitored using a 2D-laser sensor. We also investigated glycerol migration by splitting the sheets into layers and determining the glycerol distribution using high-performance liquid chromatography. Our results demonstrate the development of curl during storage as well as glycerol migration in thickness direction of the sheet, both on a comparable timescale. We thus propose that long term curl in inkjet printing can be caused by z-directional migration of the co-solvent (glycerol) over time. This study enhances understanding of the physical mechanisms that drive the long-term curl phenomenon in inkjet-printed sheets. The results can be used to optimize printing processes, allowing for the production of higher quality printed products with greater dimensional stability.

Abstract Focussing on the insulating material of power transformer—cellulose insulation paper, this paper first introduces the basic characteristics and engineering application background of insulation paper. Then, the research progress of improving the mechanical properties, thermal stability and electrical properties of insulation paper by nano modification in recent years is compared, and the promotion mechanism is analysed. In addition, in practical engineering application, the oil–paper composite insulation system composed of insulation paper and insulating oil is used for the internal insulation of oil immersed transformer. Therefore, the influence of modified insulation paper on the performance of oil–paper composite insulation system is analysed. Finally, the newly reported new insulation paper is introduced, and the future development trend of modification of traditional insulation paper is analysed.

Abstract An increase in the environmental and health concerns over fluorochemical‐based, wax‐based, and extrusion‐based paper coatings has led to a growing interest in bio‐based, biodegradable, and repulpable alternatives to obtain water‐ and oil‐repellent coatings. Reported herein is a fluorine‐free, plastic‐free, and cost‐effective water and grease resistant paper coating approach that utilizes blends of corn‐starch (S) and a novel chitosan‐graft‐polydimethylsiloxane (CP) copolymer. The hydrophobic and oleophobic performance of the S/CP‐coated paper was evaluated by varying the ratio of S and CP in the overall blend. The S/CP‐coated papers were observed to have low cobb60 values (water absorptivity) of 13 ± 0.9 g m−2 and an excellent kit rating (oil resistance) of 12/12. The S/CP‐coated paper substrate surface profile was analyzed via scanning electron microscopy (SEM). The repulpability of the coated paper is also demonstrated by washing the coating materials from the paper and recovering the pulp.

Paper derived from lignocellulose has great advantages over plastics as packaging material, nevertheless, the poor water- and oil-resistances of paper-derived products limited their application in high-end field. Herein, novel dimer acid-based waterborne polyurethanes (DWPUs) with different content of dimer acid-based polyester polyol (DG) were prepared and used as water- and oil-resistant coating for paper substrate. The effects of DG contents on water- and oil-resistances, mechanical properties and thermal stability of DWPUs coated papers were systematically investigated. When the content of DG reached up to 7 wt% (based on polyester glycol), the paper coated by DWPU exhibited 88.06% decrease in Cobb 60 value, 8.7 times increase in kit rating compared with uncoated paper. Meanwhile, DWPUs coated papers showed good mechanical properties and thermal stability. These improvements are attributed to the flexible long-alkyl chain, and six-ring structure of DWPUs as well as the continuous and homogeneous DWPU-derived membrane on the surface of paper. This study provides a new framework for the preparation of high quality, multifunctional, environmentally friendly water- and oil-resistant coatings for paper substrates.

In this review, we summarize the recent progress in thermal conductivity analysis of nanocellulose materials called cellulose nanopapers, and compare them with polymeric materials, including neat polymers, composites, and traditional paper. It is important to individually measure the in-plane and through-plane heat-conducting properties of two-dimensional planar materials, so steady-state and non-equilibrium methods, in particular the laser spot periodic heating radiation thermometry method, are reviewed. The structural dependency of cellulose nanopaper on thermal conduction is described in terms of the crystallite size effect, fibre orientation, and interfacial thermal resistance between fibres and small pores. The novel applications of cellulose as thermally conductive transparent materials and thermal-guiding materials are also discussed.

Nanofluids, formed by adding nanoscale particles to insulating oil, are stable and homogeneous suspensions that present advanced performance of electrical insulation and heat dissipation. This study shows a comprehensive literature review based on the related results of nano-modified insulating oils (both mineral and vegetable insulating oils) to analyse the preparation methods, stability, dielectric spectroscopy, thermal conductivity, breakdown characteristics under AC and DC voltage, the thermal aging performance of nanofluids and oil–paper interaction. Then theoretical models have been introduced to explain the electrical mechanism of nanofluids. In addition, future research is proposed for nanofluids which would be low cost, highly stable and practically applicable to the power transformers.