Search

PURPOSE: There is variability in clinical outcomes with vertebral body tethering (VBT) partly due to a limited understanding of the growth modulation (GM) response. We used the largest sample of patients with 3D spine reconstructions to characterize the vertebra and disc morphologic changes that accompany growth modulation during the first two years following VBT. METHODS: A multicenter registry was used to identify idiopathic scoliosis patients who underwent VBT with 2 years of follow-up. Calibrated biplanar X-rays obtained at longitudinal timepoints underwent 3D reconstruction to obtain precision morphological measurements. GM was defined as change in instrumented coronal angulation from post-op to 2-years. RESULTS: Fifty patients (mean age: 12.5 ± 1.3yrs) were analyzed over a mean of 27.7 months. GM was positively correlated with concave vertebra height growth (r = 0.57, p  10°) experienced an additional 1.6 mm (229% increase) of mean concave vertebra growth during study period compared to the Poor Modulators (GM

Fast, nondestructive three-dimensional (3D) imaging of live suspension cells remains challenging without substrate treatment or fixation, precluding scalable single-cell morphometry with minimal alterations. While optical sectioning techniques achieve 3D live cell imaging, lateral versus depth resolution differences further complicate analysis. We present a scalable microfluidic method capable of 3D fluorescent isotropic imaging of live, nonadherent cells suspended inside picoliter droplets with high-speed single-cell volumetric readout (800 to 1,200 slices in 5 to 8 s) and near-diffraction limit resolution (~216 nm). The platform features a droplet trap array that leverages flow-induced droplet interfacial shear to generate intradroplet microvortices, which rotate single cells on their axis to enable optical projection tomography (OPT)-based imaging. This allows gentle (~1 mPa shear stress) observation of cells encapsulated inside nontoxic isotonic buffer droplets, facilitating scalable OPT acquisition by simultaneous spinning of hundreds of cells. We demonstrate 3D imaging of live myeloid and lymphoid cells in suspension, including K562 cells, as well as naive and activated T cells-small cells prone to movement in their suspended phenotype. Our fully suspended, orientation-independent cell morphometry, driven by isotropic imaging and spherical harmonic analysis, enabled the study of primary T cells across various immunological activation states. This approach unveiled six distinct nuclear content distributions, contrasting with conventional 2D images that typically portray spheroid and bean-like nuclear shapes associated with lymphocytes. Our arrayed-droplet OPT technology is capable of isotropic, single live-cell 3D imaging, with the potential to perform large-scale morphometry of immune cell effector function states while providing compatibility with microfluidic droplet operations.

The severe mismatch between solid bioelectronics and dynamic biological tissues has posed enduring challenges in the biomonitoring community. Here, we developed a reconfigurable liquid cardiac sensor capable of adapting to dynamic biological tissues, facilitating ambulatory cardiac monitoring unhindered by motion artifacts or interference from other biological activities. We employed an ultrahigh-resolution 3D scanning technique to capture tomographic images of the skin on the wrist. Then, we established a theoretical model to gain a deep understanding of the intricate interaction between our reconfigurable sensor and dynamic biological tissues. To properly elucidate the advantages of this sensor, we conducted cardiac monitoring alongside benchmarks such as the electrocardiogram. The liquid cardiac sensor was demonstrated to produce stable signals of high quality (23.1 dB) in ambulatory settings.

Three-dimensional (3D) printing promises a revolution in laboratory creativity by enabling rapid prototyping, broader availability of scientific apparatuses, and transformative scientific workflows. We believe all chemistry and biology laboratories should equip themselves with one or more 3D printers and a critical mass of scientists trained to operate them. This overview surveys the techniques, intricacies, and pitfalls associated with 3D printing of functional parts, including measurements, computer-aided design, slicing, limitations of 3D printing, troubleshooting, tips for tricky filaments, and 3D printer maintenance. A flow cells are essential tools in chemistry and biology laboratories, we discuss techniques relevant to the construction of watertight 3D-printed parts. Finally, we articulate a set of principles required for reporting 3D-printed innovations to improve the field's reproducibility and encourage iterative improvements by other scientists. Ideally, authors, peer reviewers, and editors will adopt these principles. We hope these protocols inspire a new generation of publications applying 3D printing in chemistry and biology-especially highly reproducible inventions with the requisite detail and associated documentation. Such reports will facilitate broad adoption and creative iteration of the most innovative designs, thus accelerating discovery in chemistry and biology. © 2024 The Author(s). Current Protocols published by Wiley Periodicals LLC.

BACKGROUND: Phenotypic heterogeneity in early language, intellectual, motor, and adaptive functioning (LIMA) features are amongst the most striking features that distinguish different types of autistic individuals. Yet the current diagnostic criteria uses a single label of autism and implicitly emphasizes what individuals have in common as core social-communicative and restricted repetitive behavior difficulties. Subtype labels based on the non-core LIMA features may help to more meaningfully distinguish types of autisms with differing developmental paths and differential underlying biology. METHODS: Unsupervised data-driven subtypes were identified using stability-based relative clustering validation on publicly available Mullen Scales of Early Learning (MSEL) and Vineland Adaptive Behavior Scales (VABS) data (n = 615; age = 24-68 months) from the National Institute of Mental Health Data Archive (NDA). Differential developmental trajectories between subtypes were tested on longitudinal data from NDA and from an independent in-house dataset from UCSD. A subset of the UCSD dataset was also tested for subtype differences in functional and structural neuroimaging phenotypes and relationships with blood gene expression. The current subtyping model was also compared to early language outcome subtypes derived from past work. RESULTS: Two autism subtypes can be identified based on early phenotypic LIMA features. These data-driven subtypes are robust in the population and can be identified in independent data with 98% accuracy. The subtypes can be described as Type I versus Type II autisms differentiated by relatively high versus low scores on LIMA features. These two types of autisms are also distinguished by different developmental trajectories over the first decade of life. Finally, these two types of autisms reveal striking differences in functional and structural neuroimaging phenotypes and their relationships with gene expression and may highlight unique biological mechanisms. LIMITATIONS: Sample sizes for the neuroimaging and gene expression dataset are relatively small and require further independent replication. The current work is also limited to subtyping based on MSEL and VABS phenotypic measures. CONCLUSIONS: This work emphasizes the potential importance of stratifying autism by a Type I versus Type II distinction focused on LIMA features and which may be of high prognostic and biological significance.

PURPOSE OF REVIEW: The application of artificial intelligence (AI) to enhance clinical decision-making in Peyronies disease (PD) has generated significant interest. This review explores the current landscape of AI in PD evaluation. RECENT FINDINGS: Recent advances in 3D modeling offer a more sophisticated approach to assessing PD deformities; however, the implementation of 3D modeling in clinical practice faces challenges, including the need for specialized equipment and time-consuming data processing, sometimes taking several hours of labor. AI holds promise for overcoming these hurdles through its ability to efficiently process large volumes of data and to perform accurate predictions based on such data. Future integration of AI with 3D modeling techniques could revolutionize PD evaluation by improving patient counseling, surgical planning, and clinical decision-making. Significant gaps in the literature have yet to be addressed, including the absence of robust evidence that incorporating such technology is superior to standard diagnostics.

INTRODUCTION: The disco-vertebral junction (DVJ) of the lumbar spine contains thin structures with short T2 values, including the cartilaginous endplate (CEP) sandwiched between the bony vertebral endplate (VEP) and the nucleus pulposus (NP). We previously demonstrated that ultrashort-echo-time (UTE) MRI, compared to conventional MRI, is able to depict the tissues at the DVJ with improved contrast. In this study, we sought to further optimize UTE MRI by characterizing the contrast-to-noise ratio (CNR) of these tissues when either single echo or echo subtraction images are used and with varying echo times (TEs). METHODS: In four cadaveric lumbar spines, we acquired 3D Cones (a UTE sequence) images at varying TEs from 0.032 ms to 16 ms. Additionally, spin echo T1- and T2-weighted images were acquired. The CNRs of CEP-NP and CEP-VEP were measured in all source images and 3D Cones echo subtraction images. RESULTS: In the spin echo images, it was challenging to distinguish the CEP from the VEP, as both had low signal intensity. However, the 3D Cones source images at the shortest TE of 0.032 ms provided an excellent contrast between the CEP and the VEP. As the TE increased, the contrast decreased in the source images. In contrast, the 3D Cones echo subtraction images showed increasing CNR values as the second TE increased, reaching statistical significance when the second TE was above 10 ms (p < 0.05). CONCLUSIONS: Our study highlights the feasibility of incorporating UTE MRI for the evaluation of the DVJ and its advantages over conventional spin echo sequences for improving the contrast between the CEP and adjacent tissues. Additionally, modulation of the contrast for the target tissues can be achieved using either source images or subtraction images, as well as by varying the echo times.

BackgroundRadiation delivery with ultra-high dose rate (FLASH) radiotherapy (RT) holds promise for improving treatment outcomes and reducing side effects but poses challenges in radiation delivery accuracy due to its ultra-high dose rates. This necessitates the development of novel imaging and verification technologies tailored to these conditions.PurposeOur study explores the effectiveness of proton-induced acoustic imaging (PAI) in tracking the Bragg peak in three dimensions and in real time during FLASH proton irradiations, offering a method for volumetric beam imaging at both conventional and FLASH dose rates.MethodsWe developed a three-dimensional (3D) PAI technique using a 256-element ultrasound detector array for FLASH dose rate proton beams. In the study, we tested protoacoustic signal with a beamline of a FLASH-capable synchrocyclotron, setting the distal 90% of the Bragg peak around 35 mm away from the ultrasound array. This configuration allowed us to assess various total proton radiation doses, maintaining a consistent beam output of 21 pC/pulse. We also explored a spectrum of dose rates, from 15 Gy/s up to a FLASH rate of 48 Gy/s, by administering a set number of pulses. Furthermore, we implemented a three-dot scanning beam approach to observe the distinct movements of individual Bragg peaks using PAI. All these procedures utilized a proton beam energy of 180 MeV to achieve the maximum possible dose rate.ResultsOur findings indicate a strong linear relationship between protoacoustic signal amplitudes and delivered doses (R2 = 0.9997), with a consistent fit across different dose rates. The technique successfully provided 3D renderings of Bragg peaks at FLASH rates, validated through absolute Gamma index values.ConclusionsThe protoacoustic system demonstrates effectiveness in 3D visualization and tracking of the Bragg peak during FLASH proton therapy, representing a notable advancement in proton therapy quality assurance. This method promises enhancements in protoacoustic image guidance and real-time dosimetry, paving the way for more accurate and effective treatments in ultra-high dose rate therapy environments.

OBJECTIVE: Increased subcutaneous and visceral adipose tissue (SAT/VAT) volume is associated with risk for cardiometabolic diseases. This work aimed to develop and evaluate automated abdominal SAT/VAT segmentation on longitudinal MRI in adults with overweight/obesity using attention-based competitive dense (ACD) 3D U-Net and 3D nnU-Net with full field-of-view volumetric multi-contrast inputs. MATERIALS AND METHODS: 920 adults with overweight/obesity were scanned twice at multiple 3 T MRI scanners and institutions. The first scan was divided into training/validation/testing sets (n = 646/92/182). The second scan from the subjects in the testing set was used to evaluate the generalizability for longitudinal analysis. Segmentation performance was assessed by measuring Dice scores (DICE-SAT, DICE-VAT), false negatives (FN), and false positives (FP). Volume agreement was assessed using the intraclass correlation coefficient (ICC). RESULTS: ACD 3D U-Net achieved rapid ( 0.997) in longitudinal analysis. DISCUSSION: ACD 3D U-Net and 3D nnU-Net can be automated tools to quantify abdominal SAT/VAT volume rapidly, accurately, and longitudinally in adults with overweight/obesity.

The dry mass and the orientation of biomolecules can be imaged without a label by measuring their permittivity tensor (PT), which describes how biomolecules affect the phase and polarization of light. Three-dimensional (3D) imaging of PT has been challenging. We present a label-free computational microscopy technique, PT imaging (PTI), for the 3D measurement of PT. PTI encodes the invisible PT into images using oblique illumination, polarization-sensitive detection and volumetric sampling. PT is decoded from the data with a vectorial imaging model and a multi-channel inverse algorithm, assuming uniaxial symmetry in each voxel. We demonstrate high-resolution imaging of PT of isotropic beads, anisotropic glass targets, mouse brain tissue, infected cells and histology slides. PTI outperforms previous label-free imaging techniques such as vector tomography, ptychography and light-field imaging in resolving the 3D orientation and symmetry of organelles, cells and tissue. We provide open-source software and modular hardware to enable the adoption of the method.

SIGNIFICANCE: Information about the spatial organization of fibers within a nerve is crucial to our understanding of nerve anatomy and its response to neuromodulation therapies. A serial block-face microscopy method [three-dimensional microscopy with ultraviolet surface excitation (3D-MUSE)] has been developed to image nerves over extended depths ex vivo. To routinely visualize and track nerve fibers in these datasets, a dedicated and customizable software tool is required. AIM: Our objective was to develop custom software that includes image processing and visualization methods to perform microscopic tractography along the length of a peripheral nerve sample. APPROACH: We modified common computer vision algorithms (optic flow and structure tensor) to track groups of peripheral nerve fibers along the length of the nerve. Interactive streamline visualization and manual editing tools are provided. Optionally, deep learning segmentation of fascicles (fiber bundles) can be applied to constrain the tracts from inadvertently crossing into the epineurium. As an example, we performed tractography on vagus and tibial nerve datasets and assessed accuracy by comparing the resulting nerve tracts with segmentations of fascicles as they split and merge with each other in the nerve sample stack. RESULTS: We found that a normalized Dice overlap ( Dice norm ) metric had a mean value above 0.75 across several millimeters along the nerve. We also found that the tractograms were robust to changes in certain image properties (e.g., downsampling in-plane and out-of-plane), which resulted in only a 2% to 9% change to the mean Dice norm values. In a vagus nerve sample, tractography allowed us to readily identify that subsets of fibers from four distinct fascicles merge into a single fascicle as we move ∼ 5    mm along the nerves length. CONCLUSIONS: Overall, we demonstrated the feasibility of performing automated microscopic tractography on 3D-MUSE datasets of peripheral nerves. The software should be applicable to other imaging approaches. The code is available at https://github.com/ckolluru/NerveTracker.

Advanced digital technologies have rapidly been integrated into prosthodontics to improve the digital workflow for prosthetic rehabilitation. The integration of 3D datasets acquired from various imaging sources such as intraoral scanners and facial optical scanners allows the creation of virtual patients to perform presurgical simulation and prosthetic rehabilitation. The presented technique introduced a straightforward protocol for aligning intraoral scans (Trios 4, 3Shape) to optical face scans (Face Hunter, Zirkonzahn) using a global best-fit algorithm of 3D evaluation software (GOM Inspect). Nasal geometry data were used as the matching reference to produce virtual dental patients. This integration protocol ensured that the intraoral scanner (Trios 4, 3Shape) was used not only to scan dental arches but also used effectively to scan the nose. These scans along with professional facial scans can be successfully aligned to produce virtual dental patients. As only a single fully dentate patient case with an alignment deviation of 243.6 µm was used, further research to evaluate the accuracy of this protocol is needed. [ABSTRACT FROM AUTHOR]

Gamma-prefoldin (γPFD), a unique chaperone found in the extremely thermophilic methanogen Methanocaldococcus jannaschii, self-assembles into filaments in vitro, which so far have been observed using transmission electron microscopy and cryo-electron microscopy. Utilizing three-dimensional stochastic optical reconstruction microscopy (3D-STORM), here we achieve ∼20 nm resolution by precisely locating individual fluorescent molecules, hence resolving γPFD ultrastructure both in vitro and in vivo. Through CF647 NHS ester labeling, we first demonstrate the accurate visualization of filaments and bundles with purified γPFD. Next, by implementing immunofluorescence labeling after creating a 3xFLAG-tagged γPFD strain, we successfully visualize γPFD in M. jannaschii cells. Through 3D-STORM and two-color STORM imaging with DNA, we show the widespread distribution of filamentous γPFD structures within the cell. These findings provide valuable insights into the structure and localization of γPFD, opening up possibilities for studying intriguing nanoscale components not only in archaea but also in other microorganisms.

PURPOSE: To investigate the feasibility and application of a novel imaging technique, a three-dimensional dual adiabatic inversion recovery prepared ultrashort echo time (3D DIR-UTE) sequence, for high contrast assessment of cartilaginous endplate (CEP) imaging with head-to-head comparisons between other UTE imaging techniques. METHOD: The DIR-UTE sequence employs two narrow-band adiabatic full passage (AFP) pulses to suppress signals from long T2 water (e.g., nucleus pulposus (NP)) and bone marrow fat (BMF) independently, followed by multispoke UTE acquisition to detect signals from the CEP with short T2 relaxation times. The DIR-UTE sequence, in addition to three other UTE sequences namely, an IR-prepared and fat-saturated UTE (IR-FS-UTE), a T1-weighted and fat-saturated UTE sequence (T1w-FS-UTE), and a fat-saturated UTE (FS-UTE) was used for MR imaging on a 3 T scanner to image six asymptomatic volunteers, six patients with low back pain, as well as a human cadaveric specimen. The contrast-to-noise ratio of the CEP relative to the adjacent structures-specifically the NP and BMF-was then compared from the acquired images across the different UTE sequences. RESULTS: For asymptomatic volunteers, the DIR-UTE sequence showed significantly higher contrast-to-noise ratio values between the CEP and BMF (CNRCEP-BMF) (19.9 ± 3.0) and between the CEP and NP (CNRCEP-NP) (23.1 ± 1.7) compared to IR-FS-UTE (CNRCEP-BMF: 17.3 ± 1.2 and CNRCEP-NP: 19.1 ± 1.8), T1w-FS-UTE (CNRCEP-BMF: 9.0 ± 2.7 and CNRCEP-NP: 10.4 ± 3.5), and FS-UTE (CNRCEP-BMF: 7.7 ± 2.2 and CNRCEP-NP: 5.8 ± 2.4) for asymptomatic volunteers (all P-values

Purpose: To compare the 3D accuracy of three scanning strategies and conventional impressions using an edentulous model with six implants. Materials and Methods: An edentulous maxillary master model was fabricated with six equigingival internal connection implants at 0 degrees of angulation. Ten conventional open-tray splinted implant-level impressions were made and poured in stone. A master model and conventional casts were digitized with a reference scanner. Digital impressions were made by calibrated clinicians with a TRIOS 3 intraoral scanner ([IOS] 3Shape) according to three scanning strategies: DIG1 (occlusal-palatal-lingual), DIG2 (S-type motion from buccal to palatal), and DIG3 (scanning two half arches and connecting them at the midline). Each technique was repeated 10 times on the master model. Deviations from the STL datasets (N = 40) were compared to those of the reference master model using the Hexagon Metrology software system PC-DMIS CAD++. Linear distortions (dX, dY, dZ), global linear distortion (dR), and angular distortions (Absdθx, Absdθy) were calculated. Kruskal-Wallis test and mixed linear and logistic regression models were used to compare the original and binary distortion measures between the techniques. Results: The mean dR ranged from 91 μm (conventional method) to 183 μm (DIG1). The mean angular distortion ranged from 0.20 degrees (Absdθx for DIG2) to 0.69 degrees (Absdθy for DIG3). No scan pattern resulted in a more accurate reproduction in any of the measured parameters than the conventional impression method. There were significant differences between the methods for all distortion measures. Conclusions: No group reproduced the 3D position of the six-implant master model below the thresholds for both global linear and angular distortions. All the digital strategies tested were less accurate than the conventional open-tray splinted implant-level impression technique. [ABSTRACT FROM AUTHOR]

In the realm of neuroscience, mapping the three-dimensional (3D) neural circuitry and architecture of the brain is important for advancing our understanding of neural circuit organization and function. This study presents a novel pipeline that transforms mouse brain samples into detailed 3D brain models using a collaborative data analytics platform called Texera. The user-friendly Texera platform allows for effective interdisciplinary collaboration between team members in neuroscience, computer vision, and data processing. Our pipeline utilizes the tile images from a serial two-photon tomography/TissueCyte system, then stitches tile images into brain section images, and constructs 3D whole-brain image datasets. The resulting 3D data supports downstream analyses, including 3D whole-brain registration, atlas-based segmentation, cell counting, and high-resolution volumetric visualization. Using this platform, we implemented specialized optimization methods and obtained significant performance enhancement in workflow operations. We expect the neuroscience community can adopt our approach for large-scale image-based data processing and analysis.

The microvasculature facilitates gas exchange, provides nutrients to cells, and regulates blood flow in response to stimuli. Vascular abnormalities are an indicator of pathology for various conditions, such as compromised vessel integrity in small vessel disease and angiogenesis in tumors. Traditional immunohistochemistry enables the visualization of tissue cross-sections containing exogenously labeled vasculature. Although this approach can be utilized to quantify vascular changes within small fields of view, it is not a practical way to study the vasculature on the scale of whole organs. Three-dimensional (3D) imaging presents a more appropriate method to visualize the vascular architecture in tissue. Here we describe the complete protocol that we use to characterize the vasculature of different organs in mice encompassing the methods to fluorescently label vessels, optically clear tissue, collect 3D vascular images, and quantify these vascular images with a semi-automated approach. To validate the automated segmentation of vascular images, one user manually segmented one hundred random regions of interest across different vascular images. The automated segmentation results had an average sensitivity of 83±11% and an average specificity of 91±6% when compared to manual segmentation. Applying this procedure of image analysis presents a method to reliably quantify and characterize vascular networks in a timely fashion. This procedure is also applicable to other methods of tissue clearing and vascular labels that generate 3D images of microvasculature.

ABSTRACT Objective Materials and Methods Results Conclusion To evaluate and compare the survival rates of 3D‐printed and chairside milled resin polymethylmethacrylate (PMMA) immediate temporary provisional full‐arch implant restorations using prosthetic survival as the primary outcome.Records of 335 routine patients receiving 443 temporary six‐implant retained maxillary or mandibular prosthetic restorations between January 2019 and January 2022 at a private clinic (Dr Sobczak Clinical Centre, Radosc, Poland) were considered for this retrospective analysis. The analysis compared prosthetic and implant failure rates between printed and milled restorations as primary and secondary outcomes, respectively. Patient‐related and treatment‐related characteristics between groups were compared using the Chi‐square test and Mann–Whitney U‐test, respectively. Group‐specific cumulative prosthetic survival was qualitatively and quantitively compared using Kaplan–Meier, generalized linear mixed models and univariate cox proportional hazard analyses. Prosthetic survival was set into context to implant survival using Chi‐square tests. A multivariable cox proportional hazards model with frailty was used to identify confounding factors affecting prosthetic survival.Prosthetic failure rates of milled and printed temporary restorations were 13.01% and 11.25% over the average follow‐up period of 307.7 ± 115.5 days, respectively. The corresponding 180‐day cumulative prosthetic survival rates were 92.4% and 93%. Hazard ratios for the prosthetic failure of milled and printed restorations did not show a statistical difference (p = 0.794). Implant failure rates in restorations that experienced prosthetic failure (17.31%) were higher compared to restorations without failures (5.63%), with a 3.2 times significantly higher odds of failure for a prosthesis experiencing implant loss (p = 0.003). Gender, presence of teeth at treatment baseline, smoking, and bone augmentation were identified as confounding factors impacting prosthetic survival.Chairside 3D‐printed restorations may represent an equivalent treatment modality to established chairside milled restorations for immediate full‐arch therapy. Provisional prosthetic survival may impact implant survival and treatment success. [ABSTRACT FROM AUTHOR]

Theoretical research has been done on the hydromagnetic three-dimensional nanofluid flow across an inclined stretching sheet in the presence of Brownian motion and thermophoresis. It is taken into account that there are two different kinds of water-based nanofluids that contain copper and alumina. Three-dimensional nonlinear-type similarity transformations are used to convert the governing boundary-layer equations into a collection of similarity equations, which are then numerically solved by MATLAB. Further, results obtained in some limiting cases are compared to some results that have already been published, and it is found that there is good agreement. The problem is controlled by a number of physical factors, and the impact of these factors on different flow distributions is thoroughly examined with the help of graphs and tables. It has been observed that the nanofluid has better heat transfer conductivity than the ordinary base fluid. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to assess alterations in right ventricular (RV) function following percutaneous coronary intervention (PCI) in patients with chronic coronary syndromes utilizing three‐dimensional speckle tracking echocardiography (3D‐STE). Methods: A prospective study was conducted involving 136 patients diagnosed with chronic coronary syndromes undergoing PCI, constituting the study group, alongside 110 age‐ and gender‐matched healthy volunteers serving as the control group. Echocardiographic evaluations, including both conventional and three‐dimensional assessments, were performed on all study participants at 1‐week, 6, and 12 months post‐PCI. Parameters such as tricuspid annular plane systolic excursion (TAPSE) were derived from conventional echocardiography, while tricuspid lateral annular systolic velocity (S') was measured via tissue Doppler imaging. 3D‐STE was utilized to quantify metrics including right ventricular fractional area change (RVFAC), right ventricular free wall longitudinal strain (RVFWLS), right ventricular global longitudinal strain (RVGLS), right ventricular stroke volume (RVSV), and right ventricular ejection fraction (RVEF). Results: TAPSE, S', RVFAC, RVFWLS, RVGLS, RVSV, and RVEF exhibited significant increases from 1‐week to 6 months post‐PCI (p < 0.05). However, from 6 to 12 months post‐PCI, RVFAC, RVGLS, RVSV, and RVEF demonstrated no notable changes (p > 0.05). Meanwhile, TAPSE, S', and RVFWLS sustained significant elevations: TAPSE (19.63 ± 3.253% to 22.603 ± 2.885%, p < 0.001); S' (10.57 ± 2.643 to 12.61 ± 2.189 cm/s, p < 0.001); RVFWLS (18.64 ± 2.745% to 19.926 ± 3.291%, p = 0.002). At 12 months post‐PCI, S', RVFAC, RVGLS, RVSV, and RVEF remained lower than those of the healthy control group, but the differences were not statistically significant (p > 0.05). However, RVFWLS was significantly lower compared to the healthy control group (19.926 ± 3.291% vs. 22.10 ± 1.994%, p < 0.001). Conclusion: Following PCI, right ventricular systolic function in patients with chronic coronary syndromes improves significantly over time. However, even at the 12‐month post‐PCI mark, RVFWLS remains lower than that of the control group. Notably, 3D‐STE emerges as a noninvasive method for quantifying right ventricular systolic function post‐PCI in chronic coronary syndrome patients. [ABSTRACT FROM AUTHOR]

Introduction Ventral hernia repair cost the U.S. healthcare system nearly 3 billion dollars annually. Surgical repair is a critical competency for residents yet hernia recurrence rates following mesh-based repair range from 0.8% to 24%. Improving surgical techniques using cadavers is often cost-prohibited for many education programs and limited research exists using simulation models with a corresponding hernia repair curriculum in the graduate medical education setting. This pilot project aimed to develop a low cost, easily reproducible novel abdominal wall reconstruction model and pilot-test the ventral hernia repair curriculum to inform further refinement prior to formal evaluation. Material and Methods This descriptive study pilot-tested the newly refined Abdominal Wall Surgical Skills Operative Model (AWSSOM) simulator for ventral hernia repair with mesh and its corresponding 2-h training curriculum for use at all levels of general surgery graduate medical education. The AWSSOM is a 3D printed synthetic anatomically realistic abdominal wall model consisting of silicone cured layers of skin, fat, rectus abdominis and a posterior rectus sheath fascia, and silicone tubules to simulate lateral neurovascular bundles. The curriculum incorporated didactic content reflecting surgical practice guidelines, hands-on practice, and faculty guidance promoting interactive critical thinking development during task performance. A pre-/post-assessment included a 10-item knowledge test, a 19-item psychomotor assessment, and 4-items confidence survey to examine changes in performance, knowledge, and confidence in competently completing the ventral hernia repair technique. Descriptive statistics were used to report the limited results of six military surgical resident participants and inform further model and curriculum refinement prior to formal evaluation. Results The five-layer AWSSOM model was manufactured in 65 h at a material cost of $87 per model frame, is reusable model, and secure base. Six surgical residents were recruited; only four completed both pre- and post-tests due to resident schedule conflicts. The average increase in knowledge was 25%, although variable changes in confidence were observed over the four program year participants. A larger sample size and a control group are needed to demonstrate curriculum effectiveness at improving knowledge, performance, and confidence in ventral hernia repair with mesh and better delineate if high scores translate to better operative skills. A key improvement requested by residents was a more secure model base for dissection and performance of the hernia repair. Conclusions The novel abdominal wall surgical skills operative model fills an important proof of concept gap in simulation training. It is low cost with the potential to improve cognitive and psychomotor skills, as well as confidence to competently complete ventral hernia repair with mesh in the graduate medical education setting. Prior to formal effectiveness testing, our lessons learned should be addressed in both the model and curriculum. Future studies must include an adequately powered statistical evaluation with a larger sample across all levels of training. [ABSTRACT FROM AUTHOR]

Le Fort I (LFI) osteotomy is commonly performed by orthognathic surgeons; however, postoperative changes in nasolabial morphology are of concern. Several factors influence such changes, but it is difficult to accurately predict the postoperative results. This study evaluated the three-dimensional (3D) morphological changes in the nasal region according to the different directions of maxillary movement during LFI osteotomy. Forty-one patients who underwent LFI osteotomies were included. All patients were divided into maxilla-up (Group U: 20 patients) and maxilla-forward (Group F: 21 patients) groups. Soft tissue morphologies were determined preoperatively and 3 or 6 months postoperatively using an optical 3D scanner. All datasets were evaluated in terms of volume changes in nine subregions and changes in linear measurements around the nasal area. Both groups exhibited increased nasal volumes after surgery in the order of the three upper, three central, and three lower subregions. The change in volume of the central nasal region tended to be greater in Group U than that in Group F. We evaluated 3D morphological changes in the nasal region according to the direction of maxillary movement during LFI osteotomy. Group U exhibited a large change in the volume of the central nasal region. [Display omitted] [ABSTRACT FROM AUTHOR]

Objective: To quantitatively assess the periocular asymmetry and investigate its sex and age-related differences in a Caucasian population using three-dimensional (3D) stereophotogrammetry. Method: Standardized 3D photos of the periocular region of 301 Caucasians were taken using the VECTRA M3 3D Imaging System. Standardized landmarks were positioned, and data measurements in the periocular region were obtained from these images using VAM software and assessed using intraclass correlation coefficients (ICC) for reliability. Absolute differences and asymmetry index between the right and the left periocular region were calculated with a focus on gender and age-related differences. Result: Fissure height asymmetry was positively correlated with age (p < 0.01). Furthermore, reflex distance asymmetry was positively correlated with age in the elderly group (p < 0.05). Absolute differences of upper eyelid crease were 0.65 ± 0.79 mm for females and 0.90 ± 0.94 mm for males (p < 0.05). In the elderly group, the absolute differences of reflex distance were 0.664 ± 0.471 mm for males and 0.470 ± 0.408 mm for females (p < 0.05), while the absolute differences of fissure height were 0.619 ± 0.469 mm and 0.436 ± 0.372 mm, respectively (p < 0.05). All measurements had an inter-rater ICC and intra-rater ICC between 0.761 and 0.957. Conclusion: Periocular asymmetry is more prominent in older and male people. 3D photogrammetry is a reliable tool to detect periocular asymmetry and might provide an accurate and effective reference for periocular cosmetic, plastic, and reconstructive surgery in the clinical routine. Level of Evidence I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors. www.springer.com/00266. [ABSTRACT FROM AUTHOR]

Accurate sex estimation is crucial for comprehensive analysis of the biological profiles of unidentified human skeletal remains. However, there is a notable lack of research specifically addressing the morphometrics of the hard palate. Therefore, this study aimed to derive discriminant equations using the hard palate and assess their applicability for sexing partial skeletal remains in a contemporary Korean population. Statistical analyses were performed for 24 measurements derived from three-dimensional models of the hard palate, generated using computed tomography scans of 301 individuals (156 males, 145 females). Descriptive statistics revealed significant sexual dimorphism in the mean comparison of hard palate sizes between Korean males and females, with males exhibiting larger palates across all measurements (p < 0.05). Discriminant function score equations were generated to aid in sex determination. Univariate analysis yielded an accuracy range of 57.8–75.1%, whereas the stepwise method achieved an accuracy of 80.7% with five selected variables: IF-PNS, GFL-GFR, IF-GFR, Pr-EcL, and Pr-EnR. The results of this metric analysis demonstrate the usefulness of the hard palate for sex estimation in the contemporary Korean population. These findings have potential implications for forensic investigations, archeological studies, and population-specific anatomical research. [ABSTRACT FROM AUTHOR]

Dimensionality of covalent organic frameworks (COFs), in terms of 2D and 3D, must greatly influence their properties and functionalities due to the different electronic and porous structures, but still less investigated in the 20 years history. Herein, on the basis of the imidization reaction of phthalocyanine‐based tetraanhydride monomers with either 1,4‐phenylenediamine or 1,3,5,7‐tetra(4‐aminophenyl)adamantine, 2D and 3D imide‐bonded COFs with sql and pts topology have been prepared to explore their third‐order nonlinear optical (NLO) properties. In contrast to metal‐free analogues, both 2D and 3D copper‐phthalocyanine COFs have the enhanced NLO behaviors according to the open aperture Z‐scan and optical limiting (OL) results recorded under a nanosecond laser at 532 nm. In particular, 2D COFs with strong π–π staking phthalocyanine units show the NLO property with bigger third‐order nonlinear susceptibility (Imχ(3)) and unique reverse saturation absorption response at 1064 nm than that of 3D species with dispersed conjugated modules. Furthermore, femtosecond transient absorption spectra disclose the longer excited lifetimes of copper COFs than metal free samples, helpful in their NLO property. These findings clearly disclose the materials advantages of 2D phthalocyanine COFs toward the NLO characteristics and provide new candidates for OL application. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to quantitatively evaluate morphological and volumetric changes in the masseter muscle using 3-dimensional analysis of facial asymmetry patients and to identify factors influencing these changes before and after orthognathic surgery. Methods: [Reviewer1 (2)]A single-center retrospective cohort study was conducted on twenty-two patients with deviation of the chin > 4 mm. Masseter muscle volume and morphology were measured at different periods during long-term follow-up (mean 15 ± 3.2 months). Factors related to changes in masseter muscle cross-sectional area and volume analyzed were also analyzed. Results: [Reviewer1 (2) and (9)]The volume and cross-sectional area of the masseter muscle on the non-deviated side reduced by 13.5% (P < 0.05) and 16.4% (P < 0.05), respectively, after orthognathic surgery. The length of the masseter muscle increased by 13.9% on the deviated side (P <.05) but decreased by 11.7% on the non-deviated side (P < 0.05). The width decreased on the deviated side from T1 to T2 (13.51 ± 2.09 mm vs. 12.04 ± 1.39 mm), but the non-deviated side showed an opposite tendency (10.81 ± 1.31 mm vs. 12.69 ± 2.37 mm). The difference in masseter muscle length and width between the two sides significantly reduced after surgery (P < 0.05). There was a noticeable decrease in the asymmetry in the muscle in proportion to the degree of the occlusal plane angle. Conclusion: Masseter muscle asymmetry exists in patients with facial asymmetry, but it could be improved with maxilla-mandible correction. Atrophy of the masseter muscle after orthognathic surgery was greater in patients with a large inclined occlusal plane angle due to improved dental compensation. Level of Evidence IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266. [ABSTRACT FROM AUTHOR]

Introduction: Three-dimensional (3D) printing has evolved for medical applications as it can produce customized 3D models of devices and implants that can improve patient care. In this study, we aimed to validate the geometrical accuracy of the 3D models of intracranial aneurysms printed using Stereolithography 3D printing technology. Materials and methods: To compare the unruptured intracranial aneurysm mesh between the five patients and 3D printed models, we opened the DICOM files in the Sim&Size® simulation software, selected the region of interest, and performed the threshold check. We juxtaposed the 3D reconstructions and manually rotated the images to get the same orientation when needed and measured deviations at different nodes of the patient and 3D printed model meshes. Results: In the first patient, 80% of the nodes were separated by <0.56 mm and 0.17 mm. In the second patient, the deviations were below 0.17 mm for 80% of the meshes' nodes. In the next three patients, the deviations were below 0.21, 0.23, and 0.11 mm for 80% of the meshes' nodes. Finally, the overall deviation was below 0.21 mm for 80% of the mesh nodes of the five aneurysms Conclusions: 3D printed models of intracranial aneurysms are accurate, having surfaces that resemble that of patients' angiographies with an 80% cumulative deviation below 0.21 mm. [ABSTRACT FROM AUTHOR]

Study Design: Biomechanical study. Purpose: To investigate the mechanical characteristics of bone models created from medical images. Overview of Literature: Recent advancements in three-dimensional (3D) printing technology have affected its application in surgery. However, a notable gap exists in the analyses of how patient's dimorphism and variations in vertebral body anatomy influence the maximum insertional torque (MIT) and pullout strength (POS) of pedicle screws (PS) in osteoporotic vertebral bone models derived from medical images. Methods: Male and female patients with computed tomography data were selected. Dimensions of the first thoracic (T1), fourth lumbar (L4), and fifth lumbar (L5) vertebrae were measured, and bone models consisting of the cancellous and cortical bones made from polyurethane foam were created. PS with diameters of 4.5 mm, 5.5 mm, and 6.5 mm were used. T1 PS were 25 mm long, and L4 and L5 PS were 40 mm long. The bone models were secured with cement, and the MIT was measured using a calibrated torque wrench. After MIT testing, the PS head was attached to the machine's crosshead. POS was then calculated at a crosshead speed of 5 mm/min until failure. Results: The L4 and L5 were notably larger in female bone models, whereas the T1 vertebra was larger in male bone models. Consequently, the MIT and POS for L4 and L5 were higher in female bone models across all PS diameters than in male bone models. Conversely, the MIT for T1 was higher in male bone models across all PS; however, no significant differences were observed in the POS values for T1 between sexes. Conclusions: The mechanical properties of the proposed bone models can vary based on the vertebral structure and size. For accurate 3D surgical and mechanical simulations in the creation of custom-made medical devices, bone models must be constructed from patient-specific medical images. [ABSTRACT FROM AUTHOR]

Objectives: Endothelial cells (ECs), as the main cell types in the micro- and macro-vascular structure, are crucial to many vital physiological processes occurring in human body among which are both physiologic and pathologic angiogenesis. Due to their great heterogeneity, it is recommended that the ECs of each tissue should be studied separately. Recently, targeting angiogenesis in cancer has become one of the main strategies for cancer management. Accordingly, this study aimed to introduce a simple, costeffective, and practical model for studying tumor angiogenesis, which can contribute to studies focused on antiangiogenic-based treatments for cancer. Materials and Methods: In this original study, the explants of both normal and tumor tissues of mouse lung and 4T1 mouse cancer model were cultured separately in a collagen type 1 bed. Sprouting ECs formed a network of vessel-liked structures that were photographed as a model for investigating cancerous and normal angiogenesis. These ECs were then isolated from the collagen matrix using collagenase to confirm their endothelial nature. Results: The results showed that the cells invading the collagen matrix and forming a vessel-liked network were of endothelial nature. They were also found to have EC-specific characteristics and express EC-specific markers. These embedded cells may have been treated with the desired drug or further isolated from the collagen matrix and investigated in a genome or protein level. Conclusions: In sum, this modeling had the potential to become a suitable model for studying the pathological angiogenesis such as tumors in human and animal tissues. [ABSTRACT FROM AUTHOR]

In the field of mineral resource exploration, accurate imaging of subsurface structures is key to discovering and assessing potential mineral deposits. Traditional single geophysical methods, limited by terrain variations and their own constraints, can lead to divergent solutions and structural inconsistencies, affecting the reliability of exploration outcomes. To address these challenges, this paper presents a joint inversion method for three-dimensional direct current (DC) resistivity and gravity data based on a deformed hexahedral mesh. The article begins by outlining the current state of development of the method under study and proposes a research plan, followed by a detailed explanation of the theoretical basis and algorithmic implementation of the proposed method. Model tests confirm the advantages of the deformed hexahedral mesh in reducing terrain impacts and enhancing model resolution, demonstrating the optimization and complementarity of the resolution between the two methods after joint inversion. Finally, applying this method to actual data from the Huaniu Mountain area shows that joint inversion not only improves the consistency of the ore belt structure but also provides a more precise analysis for the quantitative interpretation of the distribution of underground mineral resources. This confirms the method's effectiveness and potential in practical geological exploration. [ABSTRACT FROM AUTHOR]

The bin packing problem is a classical problem widely existing in practical applications, such as shipping, warehousing and manufacturing industries. Whereas current research mainly focuses on reducing packing costs by optimizing the packing scheme, this study explores a novel approach by redesigning the bin sizes to fit the items ready to be packed. Specifically, this study considers a general three-dimensional open dimension problem (3D-ODP) where all dimensions, i.e. length, width and height, of a number of heterogeneous bin types are unknown and need to be decided. Based on the designed bin types, the corresponding packing scheme with minimal total costs is optimized, which is referred to as a three-dimensional multiple-bin-size bin packing problem (3D-MBSBPP). The combination of 3D-ODP and 3D-MBSBPP is redefined as a three-dimensional bin design and packing problem (3D-BDPP), for which a two-layer heuristic is developed. It consists of an outer heuristic framework (i.e. genetic algorithm or differential evolution algorithm) to design bin types, and an inner deterministic constructive heuristic (i.e. placement algorithm) to generate an effective solution for the 3D-MBSBPP. Extensive simulation tests on the classical benchmark and a case study derived from an e-commerce company are conducted to verify the algorithms and deduce managerial insights. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the existing evidence regarding the comparison between 2 and 3D systems in Total Laparoscopic Hysterectomy (TLH) in terms of surgical outcomes. Methods: A systematic review of electronic databases, including PubMed/MEDLINE and Web of Science, was conducted to identify relevant studies comparing 2D and 3D systems in TLH. The search employed a combination of Medical Subject Headings (MeSH) terms and keywords related to the topic. Studies meeting predefined criteria were included, while case reports and studies not directly comparing 2D and 3D systems were excluded. Two independent reviewers evaluated study eligibility and performed quality assessment. The quantitative synthesis was conducted using meta-analysis techniques. Results: A statistically significant longer operation time in the 2D group compared to the 3D group (7 studies, mean difference [MD]: 13.67, 95% confidence interval [CI] 9.35–18.00, I2 = 16%). However, no statistically significant differences were found between the groups in terms of vaginal cuff closure time (2 studies, MD: 3.22, CI − 6.58–13.02, I2 = 96%), complication rate (7 studies, odds ratio [OD]: 1.74, CI 0.70–4.30, I2 = 0%), blood loss (3 studies, MD: 2.92, CI − 15.44–21.28, I2 = 0%), and Hb drop (3 studies, MD: 0.17, CI − 0.08–0.42, I2 = 1%). Conclusion: Our results revealed a significant difference favoring 3D systems in operation time, while clinical outcomes between the two systems were found to be comparable in TLH. However, further research, particularly prospective studies with larger cohorts and longer-term follow-up, along with economic analyses, is needed to provide clinicians and healthcare decision-makers with essential guidance for practice and resource allocation. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the formation of organoid structures by co-culturing of human endometrial mesenchymal stem cells (hEnMSCs) and mouse germinal vesicle (GV) oocytes in hanging drop and sodium alginate hydrogel co-culture methods. Following the preparation of hEnMSCs and partially denuded mouse germinal vesicle oocytes, they were co-cultured in hanging drop and sodium alginate hydrogel systems as two experimental groups. In respected control groups the hEnMSCs were cultured without oocytes. The organoid formation was evaluated under the inverted microscope in all studied groups during the culture period. The hematoxylin and eosin, alcian blue, periodic acid Schiff, and Masson's trichrome methods, were applied for morphological evaluation and extracellular matrix components staining such as glycosaminoglycan, carbohydrate, and collagen fibers. In addition, the germ cell-like characteristics within the organoid structures were investigated via alkaline phosphatase activity immunocytochemistry for DEAD-box polypeptide 4 (DDX4), and the expression of octamer-binding transcription factor 4 (OCT4), DDX4, and synaptonemal complex protein 3 (SYCP3) genes by real-time RT-PCR. The culturing of hEnMSCs in the hanging drop method led to the formation of organoid structures while this structure was not seen in sodium alginate hydrogel culture. The mean diameter of organoid structures was increased during 4 days of culture in both the experimental and control groups in the hanging drop method, reaching 675.50 ± 18.55 µm and 670.25 ± 21.40 µm, respectively (P < 0.05). Morphological staining indicated some large ovoid cells with euchromatin nuclei in the experimental group, whereas, in the control group cells showed dark and dense nuclei. The extracellular matrix components were deposited in organoid structures in both control and experimental groups. The positive alkaline phosphatase activity and immunocytochemistry for DDX4 confirmed the presence of germ cell-like in the experimental group. Real-time RT-PCR showed a significant increase in the expression of DDX4 and SYCP3 genes and a decrease in the level of OCT4 expression in the experimental group compared with its controls. This study successfully generated organoid structures by co-culture of hEnMSCs and oocytes in the hanging drop method and the hEnMSCs could be differentiated into germ cell-like. This organoid structure has potential applications in regenerative medicine and reproductive biology. [ABSTRACT FROM AUTHOR]

Magnetotelluric (MT) sounding is a geophysical technique widely utilized in mineral resource surveys, where conductivity and magnetic permeability serve as essential physical parameters for forward modeling and inversion. However, the effects of conductive anisotropy and non-zero magnetic susceptibility are usually ignored. In this study, we present a three-dimensional (3D) MT modeling algorithm using Coulomb-gauged electromagnetic potentials, incorporating a mixed nodal and edge-based finite element method capable of simulating MT responses for conductive anisotropic and magnetic anomalies. Subsequently, the algorithm's accuracy was validated in two steps: first, it was compared with analytical solutions for a 1D magnetic model; then, a comparison was made with previously published numerical results for a 3D generalized conductive anisotropic model. The results of two tests show that the maximum relative error is below 0.5% for both models. Furthermore, representative models were computed to comprehensively analyze the responses of MT. The findings illustrate the relationship between anisotropic parameters and electric fields and emphasize the significance of considering the impact of magnetic susceptibility in magnetite-rich regions. [ABSTRACT FROM AUTHOR]

The marine magnetotelluric (MMT) method is a significant tool extensively utilized in offshore studies, including the understanding of the Earth's tectonics and hydrocarbon exploration. Conductive anisotropy and non-zero magnetic susceptibility are common phenomena observed in the Earth's subsurface, and MMT forward modeling is the basis of practical inversion. However, numerical modeling that incorporates both conductive anisotropy and magnetic susceptibility has received limited attention. Moreover, both accuracy and efficiency are crucial in developing a 3D MMT modeling algorithm. Therefore, we developed a multi-level parallel MMT forward modeling algorithm that is capable of simultaneously modeling conductive and magnetic arbitrary anisotropic models using the vector finite element method based on the secondary field formula. The algorithm's accuracy was validated through comparisons with previously published results for an arbitrary anisotropic model. The results show that the maximum relative error is below 2%, and the speedup reaches an impressive value of 552.41 when running with 2048 cores. Furthermore, the MMT responses of conductive anisotropy and magnetic susceptibility were comprehensively analyzed by several typical models. Our findings highlight the importance of considering magnetic susceptibility in magnetite-rich regions, particularly as the MMT responses may exhibit opposite responses for anomalies with lower resistivity and higher magnetic susceptibility compared with the surrounding rocks. [ABSTRACT FROM AUTHOR]

Background: This review aimed to critically appraise the most recent orthopedic literature around cone beam weightbearing computed tomography (WBCT), summarizing what evidence has been provided so far and identifying the main research trends in the area. Methods: This scoping review was performed on studies published between January 2013 and December 2023 on the Pubmed database. All studies (both clinical and nonclinical) in which WBCT had been used were critically analyzed to extract the aim (or aims) of the study, and the main findings related to the role of this imaging modality in the diagnostic pathway. Results: Out of 1759 studies, 129 were selected. One hundred five manuscripts (81%) dealt with elective orthopedic conditions. The majority of the analyses (88 studies; 84%) were performed on foot and ankle conditions, while 13 (12%) studies looked at knee pathologies. There was a progressive increase in the number of studies published over the years. Progressive Collapsing Foot Deformity (22 studies; 25%) and Hallux Valgus (19 studies; 21%) were frequent subjects. Twenty-four (19%) manuscripts dealt with traumatic conditions. A particular interest in syndesmotic injuries was documented (12 studies; 60%). Conclusions: In this review, we documented an increasing interest in clinical applications of weightbearing CT in the orthopedic field between 2013 and 2023. The majority of the analyses focused on conditions related to the foot and the ankle; however, we found several works investigating the value of WBCT on other joints (in particular, the knee). [ABSTRACT FROM AUTHOR]

Background: In acetabular fracture surgery, understanding the biomechanical behaviour of fractures and implants is beneficial for clinical decision-making about implant selection and postoperative (early) weightbearing protocols. This study outlines a novel approach for creating finite element models (FEA) from actual clinical cases. Our objectives were to (1) create a detailed semi-automatic three-dimensional FEA of a patient with a transverse posterior wall acetabular fracture and (2) biomechanically compare patient-specific implants with manually bent off-the-shelf implants. Methods: A computational study was performed in which we developed three finite element models. The models were derived from clinical imaging data of a 20-year-old male with a transverse posterior wall acetabular fracture treated with a patient-specific implant. This implant was designed to fit the patient's anatomy and fracture configuration, allowing for optimal placement and predetermined screw trajectories. The three FEA models included an intact hemipelvis for baseline comparison, one with a fracture fixated with a patient-specific implant, and another with a conventional implant. Two loading conditions were investigated: standing up and peak walking forces. Von Mises stress and displacement patterns in bone, implants and screws were analysed to assess the biomechanical behaviour of fracture fixation with either a patient-specific versus a conventional implant. Results: The finite element models demonstrated that for a transverse posterior wall type fracture, a patient-specific implant resulted in lower peak stresses in the bone (30 MPa and 56 MPa) in standing-up and peak walking scenario, respectively, compared to the conventional implant model (46 MPa and 90 MPa). The results suggested that patient-specific implant could safely withstand standing-up and walking after surgery, with maximum von Mises stresses in the implant of 156 MPa and 371 MPa, respectively. The results from the conventional implant indicate a likelihood of implant failure, with von Mises stresses in the implant (499 MPa and 1000 MPa) exceeding the yield stress of stainless steel. Conclusion: This study presents a workflow for conducting finite element analysis of real clinical cases in acetabular fracture surgery. This concept of personalized biomechanical fracture and implant assessment can eventually be applied in clinical settings to guide implant selection, compare conventional implants with innovative patient-specific ones, optimizing implant designs (including shape, size, materials, screw positions), and determine whether immediate full weight-bearing can be safely permitted. [ABSTRACT FROM AUTHOR]

Background: Understanding complex neurosurgical procedures and diseases, such as skull-base meningiomas, is challenging for patients due to the intricate anatomy and the involvement of critical neurovascular structures. Enhanced patient comprehension is crucial for satisfaction and improved clinical outcomes. Patient-specific 3D models have demonstrated benefits in patient education, though they are costly and time-intensive to produce. This study investigates whether the use of 3D volumetric reconstructions with anatomical segmentation, widely available via neuronavigation software, can improve patients' understanding of skull-base meningiomas, surgical procedures, and potential complications. Materials and Methods: This study included twenty patients with skull-base meningiomas. Three-dimensional volume reconstructions and anatomical segmentations were created using preoperative MRI sequences with neuronavigation software. These reconstructions were used during patient consultations where a surgeon explained key aspects of the disease, the surgical intervention, and potential complications. A questionnaire assessed the patients' perceptions of the utility of these 3D reconstructions. Results: The majority of patients (75%) found the 3D volumetric reconstructions and anatomical segmentations to be more beneficial than MRI images for understanding their disease. Similarly, 75% reported improved comprehension of the surgical approach, and 85% felt that the reconstructions enhanced their understanding of potential surgical complications. Overall, 65% of patients considered the 3D reconstructions valuable in medical consultations. Conclusions: Our study indicates that using accessible, cost-effective, and non-time-consuming 3D volumetric reconstructions with anatomical segmentation enhances patient understanding of skull-base meningiomas. Further research is necessary to confirm these findings, compare these reconstructions with physical 3D models and virtual reality models, and evaluate their impact on patient anxiety regarding the surgical procedure. [ABSTRACT FROM AUTHOR]

Roof stability is a main concern in tunneling engineering. A modified Mohr–Coulomb (MC) strength criterion to reduce the overestimation of the tensile strength described from the MC strength criterion is employed in this work. An analytical stability analysis of three-dimensional (3D) tunnel roofs for both circular and rectangular tunnels in soil is performed based on collapse mechanisms composed of a series of right elliptical cones by limit analysis. Two kinds of tunnel roof stability measures, that is the stability number, and the minimum supporting pressure required to ensure the tunnel roof stability are derived. Optimization codes are programmed to search for the most critical stability measure solutions. Comparative analyses are conducted to verify this work, and the influences of the soil strength characteristics, tensile strength cutoff, and the 3D characteristics on both the stability and the failure pattern of tunnel roof are revealed. It is shown that a stability analysis of tunnel roof considering tensile strength cutoff derives more critical stability estimations, especially for a tunnel roof under a lower internal friction angle but a greater cohesion. The 3D geometrical characteristics of tunnel roof has significant influences on both the stability measures and the function of soil strength cutoff on the stability measures. Compared with circular tunnels, supporting pressures will always being needed for rectangular tunnels to maintain the stability of tunnel roof, especially under a full tensile strength cutoff condition. [ABSTRACT FROM AUTHOR]

FACT is a developed technique for clearing tissues that does not use acrylamide. Since the removal of lipids is crucial for transparency and efficient antibody staining throughout the tissue, especially for microscopy and imaging, it is a harmful process that can cause the loss of important biological molecules such as proteins. The FACT technique overcomes this by chemically bonding the membrane and intracellular proteins with the extracellular matrix, creating a massive 3D hydrogel matrix and providing structural support to fortify the tissue during processing. Compared to other acrylamide-based techniques, the FACT technique requires less labor and harmful chemicals and is therefore considered a more suitable option. In this study, we describe the complete FACT protocol for antibody staining and imaging of whole-cleared tissues while preserving structure and improving image quality. The protocol includes tissue perfusion, fixation, clearing, antibody staining, refractive index matching (RIM) (), microscopy, and imaging. The timing for each step varies depending on the size, weight, and type of tissue, as well as the type of immunostaining. We provide an example of the FACT protocol using mouse brain tissue, which demonstrates its suitability for molecular interrogation analysis of large tissues. The FACT technique has been successfully performed on different types of tissues, making it a favorable choice for a variety of applications. [ABSTRACT FROM AUTHOR]

Background: The management of failed total ankle replacements, with significant loss of bone stock, is challenging with high rates of complications and associated morbidity. Recent technological advances have enabled the development of patient-customized 3D-printed titanium truss arthrodesis implants, which offer an alternative salvage option for failed total ankle replacements. Methods: A prospective observational study was performed of 6 cases of failed total ankle replacements that were managed using custom patient-specific 3D-printed titanium truss arthrodesis implants. Technical tips, classification, and a treatment algorithm were developed based on our initial experience. Results: Between November 2018 and March 2022, 6 patients underwent arthrodesis for failed total ankle replacements. Follow-up was available for all cases. The mean follow-up was 3.0 years (range 1-4.5). The mean MOXFQ Index improved from 73.1 to 32.3 (P <.05). The mean EQ-5D-5L Index improved from 0.366 to 0.743 (P <.05) and the EQ-VAS also improved from 53.0 to 63.3 (P =.36). The mean VAS-Pain score at final follow-up was 27.5. There were no cases of nonunion. None of the patients were smokers. The overall complication rate was 50%. Two patients returned to surgery: one for wound washout following TAR explantation and a second for removal of metalwork 2 years following surgery for a prosthetic joint infection secondary to hematogenous spread. No patients underwent revision fixation or amputation. Conclusion: Custom patient-specific 3D-printed titanium truss arthrodesis implants are a viable treatment option for failed total ankle replacements. [ABSTRACT FROM AUTHOR]

This article explores the memory effects of a three-dimensional cylindrical panel with a void using the Three-Phase-Lag (3PL) theory. The study derives the governing equations for displacement, temperature, void volume fraction, and stress. These equations are solved using Fourier–Laplace transforms and eigenvalue methods. To obtain numerical solutions and generate graphical representations, the transformed equations were inverted. Material properties from Gauthier's work were used, and graphical results were produced using Mathematica software. The influence of memory response is then demonstrated by comparing kernel functions and time delay parameters within the 3PL porous cylindrical panel. The results show significant changes in the behavior of the panel. The validity of the proposed model is confirmed by comparing its predictions with previously published findings. The authors believe these results can provide valuable insights for various engineering applications involving porous materials. The model allows for accurate prediction of material behavior under different loading conditions, leading to a deeper understanding of various kernel phenomena. [ABSTRACT FROM AUTHOR]

Background and Aim: Full‐thickness biopsies of the intestinal wall may be used to study and assess damage to the neurons of the enteric nervous system (ENS), that is, enteric neuropathy. The ENS is difficult to examine due to its localization deep in the intestinal wall and its organization with several connections in diverging directions. Histological sections used in clinical practice only visualize the sample in a two‐dimensional way. X‐ray phase‐contrast micro‐computed tomography (PC‐μCT) has shown potential to assess the cross‐sectional thickness and volume of the ENS in three dimensions (3D). The aim of this study was to explore the potential of PC‐μCT to evaluate its use to determine the size of the ENS. Methods: Full‐thickness biopsies of ileum obtained during surgery from five controls and six patients clinically diagnosed with enteric neuropathy and dysmotility were included. Punch biopsies of 1 mm in diameter and 1 cm in length, from an area containing myenteric plexus, were extracted from paraffin blocks, and scanned with synchrotron‐based PC‐μCT without any staining. Results: The microscopic volumetric structure of the neural tissue (consisting of both ganglia and fascicles) could be determined in all samples. The ratio of neural tissue volume/total tissue volume was higher in controls than in patients with enteric neuropathy (P = 0.013). The patient with the longest disease duration had the lowest ratio. Conclusion: The assessment of neural tissue can be performed in an objective, standardized way, to ensure reproducibility and comparison under physiological and pathological conditions. Further evaluation is needed to examine the role of this method in the diagnosis of enteric neuropathy. [ABSTRACT FROM AUTHOR]

An innovative method has been developed for estimating the heat flux in a funnel type mold. Conjugate Gradient Method (CGM) was used to solve the Three-Dimensional Inverse transient Heat Conduction Problem (3D-IHCP). The model was validated by comparing the results with derived from a well-established 2D-IHCP. Besides, the effect of measurement noise on the reconstruction results were discussed. Subsequently, the method was implemented to determine the heat flux in a mold simulator experiment. The analysis revealed that the heat fluxes and temperatures calculated by 3D-IHCP exhibited a similar variation trend as those obtained from the 2D-IHCP. However, for locations in the transition region beneath the meniscus, the maximum heat flux calculated by 3D-IHCP (3.14 MW/m2) was approximately 1.2 times greater than that calculated by 2D-IHCP (2.62 MW/m2), attributable to the inclined wall and convex curvature characteristics of the funnel mold. [ABSTRACT FROM AUTHOR]

Study Design: Retrospective Cohort Study. Objective: To determine whether 3D-printed porous titanium (3DPT) interbody cages offer any clinical or radiographic advantage over standard solid titanium (ST) interbody cages in transforaminal lumbar interbody fusions (TLIF). Methods: A consecutive series of adult patients undergoing one- or two-level TLIF with either 3DPT or ST "banana" cages were analyzed for patient reported outcome measures (PROMs), radiographic complications, and clinical complications. Exclusion criteria included clinical or radiographic follow-up less than 1 year. Results: The final cohort included 90 ST interbody levels from 74 patients, and 73 3DPT interbody levels from 50 patients for a total of 124 patients. Baseline demographic variables and comorbidity rates were similar between groups (P >.05). Subsidence of any grade occurred more frequently in the ST group compared with the 3DPT group (24.4% vs 5.5%, respectively, P =.001). Further, the ST group was more likely to have higher grades of subsidence than the 3DPT group (P =.009). All PROMs improved similarly after surgery and revision rates did not differ between groups (both P >.05). On multivariate analysis, significant positive correlators with increasing subsidence grade included greater age (P =.015), greater body mass index (P =.043), osteoporosis/osteopenia (P <.027), and ST cage type (P =.019). Conclusions: When considering interbody material for TLIF, both ST and 3DPT cages performed well; however, 3DPT cages were associated with lower rates of subsidence. The clinical relevance of these findings deserves further randomized, prospective investigation. [ABSTRACT FROM AUTHOR]

We present a new indication of a three-dimensional statistical shape model (SSM): a patient with bilateral impaired forearm rotation due to a congenital variance in bone shape. A corrective osteotomy was planned and performed to best match the SSM created by computed tomography (CT) scans of 18 peers. Postoperatively, pronation increased by 70°, and the patient was pain-free. A CT scan showed accurate correction of the deformity and union of all osteotomies. This technique offers opportunities for patients with bilateral nontraumatic osseous forearm pathology. [ABSTRACT FROM AUTHOR]

In invisible orthodontics, the role of composite attachments in facilitating complex tooth movements is crucial. This study, which evaluates the efficacy of a novel clinical attachment procedure, holds significant implications for the field. The technique used two templates (one pre-drilled and the other pre-loaded with high-viscosity composites) and was compared with the standard procedure. Fifty attachments were planned for four dental arch prototypes. Dental impressions were taken using digital scans for virtual planning and after tested techniques. The stereolithographic files (STL) obtained were aligned with those of the virtual planning, and a colorimetric map was used to evaluate the composite resin's maximum excess and defect deviation. The enamel–resin interfaces were observed by scanning electron microscopy (SEM). The Fisher test for the distribution of detachments and morphological defects and the Mann–Whitney test for the maximum values of excess and defect were used. No significant results were found between groups for morphological defects and detachments, and the maximum values of defect and excess were reported. SEM images for the experimental technique showed integrated adhesion. This innovative procedure, which has proven reliable and operationally straightforward, holds promise, instilling confidence in its practicality and potential to advance the field of orthodontics. [ABSTRACT FROM AUTHOR]

Background: The left ventricular (LV) rotational mechanics are of particular importance in the function of the LV. The rotational movement is the consequence of the arrangement of the subepicardial and subendocardial muscle fibers. These muscle fibers are perpendicular to each other, their contraction creates a characteristic motion. The aim of the present study was to examine the prognostic impact of LV twist assessed by three-dimensional speckle-tracking echocardiography (3D-STE) in healthy circumstances. Methods: 302 healthy adults participated in the study, 181 subjects were excluded due to certain reasons (LV could not be analysed during 3D-STE, subjects were unidentifiable, or lost to follow-up). 121 subjects were involved in the final analysis (mean age of 33.1 ± 12.3 years, 75 males), who were willing to be examined on a voluntary basis. Results: During a mean follow-up of 7.93 ± 4.21 years, 11 healthy adults suffered a cardiovascular event including 2 cardiac deaths. Using receiver operating characteristic analysis, LV twist ≥14.65 degrees as assessed by 3D-STE proved to be significantly predictive regarding the cardiovascular event-free survival (area under the curve 0.70, specificity 70%, sensitivity 65%, p = 0.028). Subjects with LV twist ≥14.65 degrees had higher basal and apical rotations and a significantly higher ratio of these individuals developed cardiovascular events compared to cases with LV twist <14.65 degrees. Subjects with cardiovascular events had lower LV global longitudinal strain, higher basal LV rotation and twist and the ratio of subjects with LV twist ≥14.65 degrees was elevated as compared to cases without events. Conclusions: 3D-STE-derived LV twist independently predicts future cardiovascular events in healthy adults. [ABSTRACT FROM AUTHOR]

Effective forest management and conservation are increasingly critical in addressing the challenges posed by climate change. Advances in remote sensing technologies, such as terrestrial laser scanning, offer promising tools for more accurate assessments in forestry research. This study explores the application of TLS in biomass estimation by conducting a bibliometric analysis of scientific articles indexed in Scopus and the Web of Science. By examining the literature from 2010 to 2024, the study identifies key trends, knowledge gaps, and emerging research opportunities, as well as practical applications in forest management and conservation. The analysis reveals a significant rise in scientific output on TLS, with an average annual growth rate of 8.16%. The most cited works address biomass estimation at the individual tree level using laser scanning data. China and the United States lead in the publication volume with 11 articles. The collaboration network highlights research disparities among regions such as Latin America. Overall, TLS has proven effective for the non-destructive measurement of forest variables and biomass. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)