Search

• A novel model (LabTNet) is proposed to estimate crop biochemical traits. • LabTNet jointly estimates multiple wheat traits by hyperspectral data. • LabTNet exhibits superior predictive performance than existing methods. • Grad-CAM analyzed hyperspectral attention regions of LabTNet. Accurate estimation of crop leaf and canopy biochemical traits, such as leaf dry matter content (Cm), leaf equivalent water thickness (Cw), leaf area index (LAI), dry leaf biomass (DLB), leaf total water content (LW), and fresh leaf biomass (FLB), is essential for monitoring crop growth accurately. The vegetation spectral feature technique combined with statistical regression methods is widely employed for remote sensing crop biochemical traits mapping. However, the crop canopy spectral reflectance is influenced by various crop biochemical traits and uncertainties in geometric changes of light and soil background effects. Consequently, the remote-sensing estimation of crop biochemical traits is limited. A potential solution involves training a deep learning model to understand the physical relationship between crop biochemical traits and canopy spectral reflectance based on a physical radiative transfer model (RTM). The primary focus of this study is to propose a winter-wheat leaf and canopy biochemical traits analysis and mapping method based on hyperspectral remote sensing, utilizing a deep learning network for leaf area index and leaf biochemical traits deep learning network (LabTNet). This study consists of four main tasks: (1) Field-based measurements of winter-wheat spectra and biochemical traits were conducted in two growing seasons. A PROSAIL RTM was also employed to generate a simulated dataset representing comprehensive and complex winter-wheat field conditions. (2) The LabTNet deep learning model was pre-trained using the simulated spectra dataset to acquire knowledge of the physical relationship between crop biochemical traits and canopy spectral reflectance derived from the RTM. Subsequently, the model was re-trained using the field-based spectra dataset from two growing seasons, employing a transfer learning technique. (3) An analysis was conducted to assess the performance of LabTNet against traditional statistical regression methods in estimating crop leaf and canopy biochemical traits. The study used the gradient-weighted class activation mapping (Grad-CAM) technique to analyze the attention regions of input spectra (454:8:950 nm, 960:10:1300 nm, 1450:10:1750 nm, 2000:10:2350 nm) by different convolutional neural network layers in LabTNet, aiming to enhance the interpretability of deep learning models. (4) Winter-wheat leaf and canopy biochemical traits (Cw, Cm, LAI, DLB, LW, and FLB) were mapped using the LabTNet deep learning model. Our research has the following conclusions: (1) Combining the RTM and deep learning techniques yields higher winter-wheat biochemical trait estimates than traditional statistical regression methods. (2) Different LabTNet deep learning model layers focus on distinct areas of canopy reflectance, corresponding to the sensitive regions for various winter-wheat biochemical traits. (3) LabTNet demonstrates similar winter-wheat leaf and canopy biochemical traits estimation performance using visible and near-infrared (VNIR) reflectance data and full-spectral (FS) range hyperspectral reflectance as inputs (Cw: R 2 = 0.603–0.653, RMSE = 0.0015–0.0015 cm; Cm: R 2 = 0.511–0.560, RMSE = 0.0006–0.0007 g/m2; LAI: R 2 = 0.773–0.793, RMSE = 0.65–0.66 m2/m2; LW: R 2 = 0.842–0.847, RMSE = 67.93–70.73 g/m2; DLB: R 2 = 0.747–0.762, RMSE = 21.10–21.89 g/m2; FLB: R 2 = 0.831–0.840, RMSE = 86.26–90.30 g/m2). The combined use of UAV hyperspectral remote sensing and the LabTNet model proves effective in providing high-performance winter-wheat leaf and canopy biochemical trait maps, offering valuable insights for agricultural management. [ABSTRACT FROM AUTHOR]

Water productivity (WP) is a key element of agricultural water management in agricultural irrigated regions. The objectives of this study were: (i) to estimate biomass of winter wheat using spectral indices; (ii) integrate the estimation of biomass data with the AquaCrop model using a lookup table for higher accuracy biomass simulation; (iii) show estimation accuracy of the data assimilation method in yield and WP. Spectral variables and concurrent biomass, yield and WP of samples were acquired at the Xiaotangshan experimental site in Beijing, China, during the 2008/2009, 2009/2010, 2010/2011 and 2011/2012 winter wheat growing seasons. The results showed that all spectral indices had a highly significant relationship with biomass, especially normalized difference matter index, with R and RMSE values of 0.84 and 1.43 t/ha, respectively. Simulation of biomass and yield by the AquaCrop model were in good agreement with the measured biomass and yield of winter wheat. The results showed that the data assimilation method (R = 0.79 and RMSE = 0.12 kg/m) could be used to estimate WP. The result indicated that the AquaCrop model could be used to estimate yield and WP with the aid of remote sensing for improving agricultural water resources management. [ABSTRACT FROM AUTHOR]

• We introduce leaf N profile characteristic coefficient K m on its remote estimates. • Diverse datasets are used for developing robust models for remote estimates of K m. • Four regression algorithms are tested with various possible sets of predictors. • A robust method is proposed to estimate K m from canopy reflectance for winter wheat. The characteristic coefficient of vertical leaf nitrogen (N) profile is a canopy parameter that indicates the attenuation steepness of leaf N from the top of canopy downward. It is sensitive not only to crop production, grain yield and quality, and light- and N-use efficiency but also to N deficiency in the crop. We introduce this coefficient by exploring a robust method to estimate it from canopy spectral reflectance. We analyze comprehensively various approaches based on diverse datasets of winter wheat. We test and compare the accuracy and stability of models by using the adjusted and weighted coefficient of determination (wR adj 2), the mean absolute error (MAE), and the mean and coefficient of variation (CV) over multiple seasons. The analysis focuses mainly on the coefficient of mass-based leaf N profile (K m); nevertheless, a comparison with the coefficient of area-based leaf N profile is presented. The results indicate that the most robust model to estimate K m of winter wheat is K m = (1.8037 R G V I - 0.9702 + 0.0786 e x p (0.6315 / D A S F)) / 2 , where RGVI is the red and green ratio vegetation index, and DASF is the directional area scattering factor. The mean wR adj 2 is 0.663 with CV = 8.2% and the mean MAE is 0.117 with CV = 12.8% over three seasons including various situations. This makes it possible to assess K m at large areas and follow its dynamics over multiple periods in a timely and nondestructive manner. [ABSTRACT FROM AUTHOR]

Crop evapotranspiration (ET c ) is an important indicator used in managing agriculture water and monitoring crop growth. The objectives of this study were to: (1) analyze the seasonal dynamics of crop coefficients (K c ) and basal crop coefficient (K cb ) derived from vegetation indices (VIs) based on a time series of Huanjing (HJ) satellite images during 2011 and 2013; (2) investigate daily and monthly variations of ET c at key growth stages of winter wheat using lysimeter or eddy covariance systems; (3) compare the performance of two Huanjing-1A/B satellite-based FAO-56 models (the FAO-56 dual-crop coefficient model and the vegetation indices-reference evapotranspiration (VIs-ET o ) method) to the ET c measurements; (4) select the best ET c model for estimating daily ET c (mm/day) at the Xiaotangshan experimental site and its surrounding farmland in conjunction with HJ satellite overpasses from March to May 2011. The VIs and concurrent ET c were acquired at the Xiaotangshan experimental site, Beijing, China, during the 2011 and 2013 winter wheat growing seasons. The results showed that the overall tendencies of crop coefficient patterns (K cb and K c ), ET c and ET o first increased and then decreased at key growth stages of winter wheat. The cumulative ET c of water consumption was highest at the heading-filling stage in May. Similar changes in cumulative ET c were found during April–May 2011 and 2013. The estimation accuracy of ET c was better based on FAO-56 dual-crop coefficient model ( R 2 = 0.88 and RMSE = 1.06 mm/day in 2011 and R 2 = 0.84 and RMSE = 0.55 mm/day in 2013) than the VI-ET o method ( R 2 = 0.77 and RMSE = 1.22 mm/day in 2011 and R 2 = 0.67 and RMSE = 0.81 mm/day in 2013). The results indicated that the FAO-56 dual-crop coefficient model and VI-ET o methods were used to estimate ET c in winter wheat. Two Huanjing-1A/B satellite-based FAO-56 models were used to timely estimate ET c during the winter wheat mid-season, and ET c was used to adjust agricultural water management practices. [ABSTRACT FROM AUTHOR]

Highlights: [•] The complementary relationship model (CR) was employed to estimate actual ET. [•] The high temporal ET was validated by Lysimeter observation. [•] The CR model was combined with IKONOS image to estimate high spatial resolution instantaneous and daily ET. [Copyright &y& Elsevier]

A better understanding of wheat nitrogen status is important for improving N fertilizer management in precision farming. In this study, four different sensors were evaluated for their ability to estimate winter wheat nitrogen. A Gaussian process regression (GPR) method with the sequential backward feature removal (SBBR) routine was used to identify the best combinations of vegetation indices (VIs) sensitive to wheat N indicators for different sensors. Wheat leaf N concentration (LNC), plant N concentration (PNC), and the nutrition index (NNI) were estimated by the VIs through parametric regression (PR), multivariable linear regression (MLR), and Gaussian process regression (GPR). The study results reveal that the optical fluorescence sensor provides more accurate estimates of winter wheat N status at a low-canopy coverage condition. The Dualex Nitrogen Balance Index (NBI) is the best leaf-level indicator for wheat LNC, PNC and NNI at the early wheat growth stage. At the early growth stage, Multiplex indices are the best canopy-level indicators for LNC, PNC, and NNI. At the late growth stage, ASD VIs provide accurate estimates for wheat N indicators. This study also reveals that the GPR with SBBR analysis method provides more accurate estimates of winter wheat LNC, PNC, and NNI, with the best VI combinations for these sensors across the different winter wheat growth stages, compared with the MLR and PR methods. [ABSTRACT FROM AUTHOR]

The normalized difference vegetation index (NDVI) is an important agricultural parameter that is closely correlated with crop growth. In this study, a novel method combining the dynamic time warping (DTW) model and the long short-term memory (LSTM) deep recurrent neural network model was developed to predict the short and medium-term winter wheat NDVI. LSTM is well-suited for modelling long-term dependencies, but this method may be susceptible to overfitting. In contrast, DTW possesses good predictive ability and is less susceptible to overfitting. Therefore, by utilizing the combination of these two models, the prediction error caused by overfitting is reduced, thus improving the final prediction accuracy. The combined method proposed here utilizes the historical MODIS time series data with an 8-day time resolution from 2015 to 2020. First, fast Fourier transform (FFT) is used to decompose the time series into two parts. The first part reflects the inter-annual and seasonal variation characteristics of winter wheat NDVI, and the DTW model is applied for prediction. The second part reflects the short-term change characteristics of winter wheat NDVI, and the LSTM model is applied for prediction. Next, the results from both models are combined to produce a final prediction. A case study in Hebei Province that predicts the NDVI of winter wheat at five prediction horizons in the future indicates that the DTW–LSTM model proposed here outperforms the LSTM model according to multiple evaluation indicators. The results of this study suggest that the DTW–LSTM model is highly promising for short and medium-term NDVI prediction. [ABSTRACT FROM AUTHOR]

Accurate determination of phenological information of crops is essential for field management and decision-making. Remote sensing time-series data are widely used for extracting phenological phases. Existing methods mainly extract phenological phases directly from individual remote sensing time-series, which are easily affected by clouds, noise, and mixed pixels. This paper proposes a novel method of phenological phase extraction based on the time-weighted dynamic time warping (TWDTW) algorithm using MODIS Normalized Difference Vegetation Index (NDVI) 5-day time-series data with a spatial resolution of 500 m. Firstly, based on the phenological differences between winter wheat and other land cover types, winter wheat distribution is extracted using the TWDTW classification method, and the results show that the overall classification accuracy and Kappa coefficient reach 94.74% and 0.90, respectively. Then, we extract the pure winter-wheat pixels using a method based on the coefficient of variation, and use these pixels to generate the average phenological curve. Next, the difference between each winter-wheat phenological curve and the average winter-wheat phenological curve is quantitatively calculated using the TWDTW algorithm. Finally, the key phenological phases of winter wheat in the study area, namely, the green-up date (GUD), heading date (HD), and maturity date (MD), are determined. The results show that the phenological phase extraction using the TWDTW algorithm has high accuracy. By verification using phenological station data from the Meteorological Data Sharing Service System of China, the root mean square errors (RMSEs) of the GUD, HD, and MD are found to be 9.76, 5.72, and 6.98 days, respectively. Additionally, the method proposed in this article is shown to have a better extraction performance compared with several other methods. Furthermore, it is shown that, in Hebei Province, the GUD, HD, and MD are mainly affected by latitude and accumulated temperature. As the latitude increases from south to north, the GUD, HD, and MD are delayed, and for each 1° increment in latitude, the GUD, HD, and MD are delayed by 4.84, 5.79, and 6.61 days, respectively. The higher the accumulated temperature, the earlier the phenological phases occur. However, latitude and accumulated temperature have little effect on the length of the phenological phases. Additionally, the lengths of time between GUD and HD, HD and MD, and GUD and MD are stable at 46, 41, and 87 days, respectively. Overall, the proposed TWDTW method can accurately determine the key phenological phases of winter wheat at a regional scale using remote sensing time-series data. [ABSTRACT FROM AUTHOR]

Rapid and accurate crop aboveground biomass estimation is beneficial for high-throughput phenotyping and site-specific field management. This study explored the utility of high-definition digital images acquired by a low-flying unmanned aerial vehicle (UAV) and ground-based hyperspectral data for improved estimates of winter wheat biomass. To extract fine textures for characterizing the variations in winter wheat canopy structure during growing seasons, we proposed a multiscale texture extraction method (Multiscale_Gabor_GLCM) that took advantages of multiscale Gabor transformation and gray-level co-occurrency matrix (GLCM) analysis. Narrowband normalized difference vegetation indices (NDVIs) involving all possible two-band combinations and continuum removal of red-edge spectra (SpeCR) were also extracted for biomass estimation. Subsequently, non-parametric linear (i.e., partial least squares regression, PLSR) and nonlinear regression (i.e., least squares support vector machine, LSSVM) analyses were conducted using the extracted spectral features, multiscale textural features and combinations thereof. The visualization technique of LSSVM was utilized to select the multiscale textures that contributed most to the biomass estimation for the first time. Compared with the best-performing NDVI (1193, 1222 nm), the SpeCR yielded higher coefficient of determination (R2), lower root mean square error (RMSE), and lower mean absolute error (MAE) for winter wheat biomass estimation and significantly alleviated the saturation problem after biomass exceeded 800 g/m2. The predictive performance of the PLSR and LSSVM regression models based on SpeCR decreased with increasing bandwidths, especially at bandwidths larger than 11 nm. Both the PLSR and LSSVM regression models based on the multiscale textures produced higher accuracies than those based on the single-scale GLCM-based textures. According to the evaluation of variable importance, the texture metrics "Mean" from different scales were determined as the most influential to winter wheat biomass. Using just 10 multiscale textures largely improved predictive performance over using all textures and achieved an accuracy comparable with using SpeCR. The LSSVM regression model based on the combination of the selected multiscale textures, and SpeCR with a bandwidth of 9 nm produced the highest estimation accuracy with R2val = 0.87, RMSEval = 119.76 g/m2, and MAEval = 91.61 g/m2. However, the combination did not significantly improve the estimation accuracy, compared to the use of SpeCR or multiscale textures only. The accuracy of the biomass predicted by the LSSVM regression models was higher than the results of the PLSR models, which demonstrated LSSVM was a potential candidate to characterize winter wheat biomass during multiple growth stages. The study suggests that multiscale textures derived from high-definition UAV-based digital images are competitive with hyperspectral features in predicting winter wheat biomass. [ABSTRACT FROM AUTHOR]

Solar-induced chlorophyll fluorescence (SIF) is closely related to the light-reaction process and has been recognized as a good indicator for tracking gross primary productivity (GPP). Nevertheless, it has not been widely examined how SIF and GPP respond to temperature. Here, we explored the linkage mechanisms between SIF and GPP in winter wheat based on continuous measurements of canopy SIF ( c S I F ), GPP, and meteorological data. To separately explore the structural and physiological mechanisms underlying the SIF–GPP relationship, we studied the temperature responses of the estimated light use efficiency ( L U E p ), canopy-level chlorophyll fluorescence yield ( c S I F y i e l d ) and photosystem-level chlorophyll fluorescence yield ( Φ F ) estimated using canopy-scale remote sensing measurements. We found that GPP, red canopy SIF ( c S I F 688 ) and far-red canopy SIF ( c S I F 760 ) all exhibited a decreasing trend during overwintering periods. However, GPP and c S I F 688 showed relatively more obvious changes in response to air temperature ( T a ) than c S I F 760 did. In addition, the L U E p responded sensitively to T a (the correlation coefficient, r = 0.83, p-value < 0.01). The c S I F y i e l d _ 688 and Φ F _ 688 ( Φ F at 688 nm) also exhibited significantly positive correlations with T a (r > 0.7, p-value < 0.05), while c S I F y i e l d _ 760 and Φ F _ 760 ( Φ F at 760 nm) were weakly correlated with T a (r < 0.3, p-value > 0.05) during overwintering periods. The results also show that L U E p was more sensitive to T a than Φ F , which caused changes in the L U E p / Φ F ratio in response to T a . By considering the influence of T a , the GPP estimation based on the total SIF emitted at the photosystem level ( t S I F ) was improved (with R2 increased by more than 0.12 for t S I F 760 and more than 0.05 for t S I F 688 ). Therefore, our results indicate that the L U E p / Φ F ratio is affected by temperature conditions and highlights that the SIF–GPP model should consider the influence of temperature. [ABSTRACT FROM AUTHOR]

Predicting the crop nitrogen (N) nutrition status is critical for optimizing nitrogen fertilizer application. The present study examined the ability of multiple image features derived from unmanned aerial vehicle (UAV) RGB images for winter wheat N status estimation across multiple critical growth stages. The image features consisted of RGB-based vegetation indices (VIs), color parameters, and textures, which represented image features of different aspects and different types. To determine which N status indicators could be well-estimated, we considered two mass-based N status indicators (i.e., the leaf N concentration (LNC) and plant N concentration (PNC)) and two area-based N status indicators (i.e., the leaf N density (LND) and plant N density (PND)). Sixteen RGB-based VIs associated with crop growth were selected. Five color space models, including RGB, HSV, L*a*b*, L*c*h*, and L*u*v*, were used to quantify the winter wheat canopy color. The combination of Gaussian processes regression (GPR) and Gabor-based textures with four orientations and five scales was proposed to estimate the winter wheat N status. The gray level co-occurrence matrix (GLCM)-based textures with four orientations were extracted for comparison. The heterogeneity in the textures of different orientations was evaluated using the measures of mean and coefficient of variation (CV). The variable importance in projection (VIP) derived from partial least square regression (PLSR) and a band analysis tool based on Gaussian processes regression (GPR-BAT) were used to identify the best performing image features for the N status estimation. The results indicated that (1) the combination of RGB-based VIs or color parameters only could produce reliable estimates of PND and the GPR model based on the combination of color parameters yielded a higher accuracy for the estimation of PND (R2val = 0.571, RMSEval = 2.846 g/m2, and RPDval = 1.532), compared to that based on the combination of RGB-based VIs; (2) there was no significant heterogeneity in the textures of different orientations and the textures of 45 degrees were recommended in the winter wheat N status estimation; (3) compared with the RGB-based VIs and color parameters, the GPR model based on the Gabor-based textures produced a higher accuracy for the estimation of PND (R2val = 0.675, RMSEval = 2.493 g/m2, and RPDval = 1.748) and the PLSR model based on the GLCM-based textures produced a higher accuracy for the estimation of PNC (R2val = 0.612, RMSEval = 0.380%, and RPDval = 1.601); and (4) the combined use of RGB-based VIs, color parameters, and textures produced comparable estimation results to using textures alone. Both VIP-PLSR and GPR-BAT analyses confirmed that image textures contributed most to the estimation of winter wheat N status. The experimental results reveal the potential of image textures derived from high-definition UAV-based RGB images for the estimation of the winter wheat N status. They also suggest that a conventional low-cost digital camera mounted on a UAV could be well-suited for winter wheat N status monitoring in a fast and non-destructive way. [ABSTRACT FROM AUTHOR]

Generating spatial crop yield information is of great significance for academic research and guiding agricultural policy. Existing public yield datasets have a coarse spatial resolution, spanning from 1 to 43 km. Although these datasets are useful for analyzing large-scale temporal and spatial change in yield, they cannot deal with small-scale spatial heterogeneity, which happens to be the most significant characteristic of the Chinese farmers' economy. Hence, we generated a 30 m Chinese winter wheat yield dataset (ChinaWheatYield30m) for major winter-wheat-producing provinces in China for the period 2016–2021 with a semi-mechanistic model (hierarchical linear model, HLM). The yield prediction model was built by considering the wheat growth status and climatic factors. It can estimate wheat yield with excellent accuracy and low cost using a combination of satellite observations and regional meteorological information (i.e., Landsat 8, Sentinel 2 and ERA5 data from the Google Earth Engine (GEE) platform). The results were validated using in situ measurements and census statistics and indicated a stable performance of the HLM based on calibration datasets across China, with a correlation coefficient (r) of 0.81 and a relative root mean square error (rRMSE) of 12.59 %. With regards to validation, the ChinaWheatYield30m dataset was highly consistent with in situ measurement data and statistical data (p<0.01), indicated by an r (rRMSE) of 0.72** (15.34 %) and 0.69** (19.16 %). The ChinaWheatYield30m is a sophisticated dataset with both high spatial resolution and excellent accuracy; such a dataset will provide basic knowledge of detailed wheat yield distribution, which can be applied for many purposes including crop production modeling and regional climate evaluation. The ChinaWheatYield30m dataset generated from this study can be downloaded from 10.5281/zenodo.7360753 (Zhao et al., 2022b). [ABSTRACT FROM AUTHOR]

Timely and accurate estimation of winter wheat yield at a regional scale is crucial for national food policy and security assessments. Near-infrared reflectance is not sensitive to the leaf area index (LAI) and biomass of winter wheat at medium to high canopy cover (CC), and most of the vegetation indices displayed saturation phenomenon. However, LAI and biomass at medium to high CC can be efficiently estimated using imaging data from radar with stronger penetration, such as RADARSAT-2. This study had the following three objectives: (i) to combine vegetation indices based on our previous studies for estimating CC and biomass for winter wheat using HJ-1A/B and RADARSAT-2 imaging data; (ii) to combine HJ-1A/B and RADARSAT-2 imaging data with the AquaCrop model using the particle swarm optimization (PSO) algorithm to estimate winter wheat yield; and (iii) to compare the results from the assimilation of HJ-1A/B + RADARSAT-2 imaging data, HJ-1A/B imaging data, and RADARSAT-2 imaging data into the AquaCrop model using the PSO algorithm. Remote sensing data and concurrent LAI, biomass, and yield of sample fields were acquired in Yangling District, Shaanxi, China, during the 2014 winter wheat growing season. The PSO optimization algorithm was used to integrate the AquaCrop model and remote sensing data for yield estimation. The modified triangular vegetation index 2 (MTVI2) × radar vegetation index (RVI) and the enhanced vegetation index (EVI) × RVI had good relationships with CC and biomass, respectively. The results indicated that the predicted and measured yield ( R 2 = 0.31 and RMSE = 0.94 ton/ha) had agreement when the estimated CC from the HJ-1A/B and RADARSAT-2 data was used as the dynamic input variable for the AquaCrop model. When the estimated biomass from the HJ-1A/B and RADARSAT-2 data was used as the dynamic input variable for the AquaCrop model, the predicted yield showed agreement with the measured yield ( R 2 = 0.42 and RMSE = 0.81 ton/ha). These results show that using the biomass as the dynamic input variable provides a better yield estimation than using the CC as the dynamic variable. The predicted biomass and yield were more accurately estimated by combining the HJ-1A/B and RADARSAT-2 data with the AquaCrop model than by combining the only HJ-1A/B or RADARSAT-2 data with the AquaCrop model using the PSO algorithm. The results indicated that the PSO-based assimilation method could be used to estimate the winter wheat yield from the spot to the regional scale. [ABSTRACT FROM AUTHOR]

Crop failure detection using UAV images is helpful for precision agriculture, enabling the precision management of failure areas to reduce crop loss. For wheat failure area detection at the seedling stage using UAV images, the commonly used methods are not sufficiently accurate. Thus, herein, a new tool for precision wheat management at the seedling stage is designed. For this purpose, field experiments with two wheat cultivars and four nitrogen (N) treatments were conducted to create different scenarios for the failure area, and multispectral UAV images were acquired at the seedling growth stage. Based on the above data, a new failure detection method was designed by assimilating prior knowledge and a filter analysis strategy and compared with classical filter-based methods and Hough transform-based methods for wheat failure area detection. The results showed that the newly proposed assimilation method had a detection accuracy between 83.86% and 97.67% for different N levels and cultivars. In contrast, the filter-based methods and Hough transform-based methods had detection accuracies between 53.73% and 83.95% and between 20.71% and 75.79%, respectively. Thus, the assimilation method demonstrated the best failure detection performance. • An assimilation method was proposed for wheat failure area detection. • Different methods were compared for wheat failure area detection. • Wheat failure area can be detected using unmanned aerial vehicles imagery. [ABSTRACT FROM AUTHOR]

Crop production is one of the major interactions between humans and the natural environment, in the process, carbon is translocated cyclically inside the ecosystem. Data assimilation algorithm has advantages in mechanism and robustness in yield estimation, however, the computational efficiency is still a major obstacle for widespread application. To address the issue, a novel hybrid method based on the combination of the Crop Biomass Algorithm of Wheat (CBA-Wheat) to the Simple Algorithm For Yield (SAFY) model and the transfer learning method was proposed in this paper, which enables winter wheat yield estimation with acceptable accuracy and calculation efficiency. The transfer learning techniques learn the knowledge from the SAFY model and then use the knowledge to predict wheat yield. The main results showed that: (1) The comparison using CBA-Wheat between measured AGB and predicted AGB all reveal a good correlation with R2 of 0.83 and RMSE of 1.91 t ha−1, respectively; (2) The performance of yield prediction was as follows: transfer learning method (R2 of 0.64, RMSE of 1.05 t ha−1) and data assimilation (R2 of 0.64, RMSE of 1.01 t ha−1). At the farm scale, the two yield estimation models are still similar in performance with RMSE of 1.33 t ha−1 for data assimilation and 1.13 t ha−1 for transfer learning; (3) The time consumption of transfer learning with complete simulation data set is significantly lower than that of the other two yield estimation tests. The number of pixels to be simulated was about 16,000, and the computational efficiency of the data assimilation algorithm and transfer learning without complete simulation datasets. The transfer learning model shows great potential in improving the efficiency of production estimation. [ABSTRACT FROM AUTHOR]

Crop yields are important for food security and people's living standards, and it is therefore very important to predict the yield in a timely manner. This study used different vegetation indices and red-edge parameters calculated based on the canopy reflectance obtained from near-surface hyperspectral data and UAV hyperspectral data and used the partial least squares regression (PLSR) and artificial neural network (ANN) methods to estimate the yield of winter wheat at different growth stages. Verification was performed based on these two types of hyperspectral remote sensing data and the yield was estimated using vegetation indices and a combination of vegetation indices and red-edge parameters as the modeling independent variables, respectively, using PLSR and ANN regression, respectively. The results showed that, for the same data source, the optimal vegetation index for estimating the yield was the same in all of the studied growth stages; however, the optimal red-edge parameters were different for different growth stages. Compared with using only the vegetation indices as the modeling factor to estimate yield, the combination of the vegetation indices and red-edge parameters obtained superior estimation results. Additionally, the accuracy of yield estimation was shown to be improved by using the PLSR and ANN methods, with the yield estimation model constructed using the PLSR method having a better prediction effect. Moreover, the yield prediction model obtained using the near-surface hyperspectral sensors had a higher fitting and accuracy than the model obtained using the UAV hyperspectral remote sensing data (the results were based on the specific growth stressors, N and water supply). This study shows that the use of a combination of vegetation indices and red-edge parameters achieved an improved yield estimation compared to the use of vegetation indices alone. In the future, the selection of suitable sensors and methods needs to be considered when constructing models to estimate crop yield. [ABSTRACT FROM AUTHOR]

Although crop-growth monitoring is important for agricultural managers, it has always been a difficult research topic. However, unmanned aerial vehicles (UAVs) equipped with RGB and hyperspectral cameras can now acquire high-resolution remote-sensing images, which facilitates and accelerates such monitoring. To explore the effect of monitoring a single crop-growth indicator and multiple indicators, this study combines six growth indicators (plant nitrogen content, above-ground biomass, plant water content, chlorophyll, leaf area index, and plant height) into the new comprehensive growth index (CGI). We investigate the performance of RGB imagery and hyperspectral data for monitoring crop growth based on multi-time estimation of the CGI. The CGI is estimated from the vegetation indices based on UAV hyperspectral data treated by linear, nonlinear, and multiple linear regression (MLR), partial least squares (PLSR), and random forest (RF). The results are as follows: (1) The RGB-imagery indices red reflectance (r), the excess-red index (EXR), the vegetation atmospherically resistant index (VARI), and the modified green-red vegetation index (MGRVI), as well as the spectral indices consisting of the linear combination index (LCI), the modified simple ratio index (MSR), the simple ratio vegetation index (SR), and the normalized difference vegetation index (NDVI), are more strongly correlated with the CGI than a single growth-monitoring indicator. (2) The CGI estimation model is constructed by comparing a single RGB-imagery index and a spectral index, and the optimal RGB-imagery index corresponding to each of the four growth stages in order is r, r, r, EXR; the optimal spectral index is LCI for all four growth stages. (3) The MLR, PLSR, and RF methods are used to estimate the CGI. The MLR method produces the best estimates. (4) Finally, the CGI is more accurately estimated using the UAV hyperspectral indices than using the RGB-image indices. [ABSTRACT FROM AUTHOR]

Rapidly developing remote sensing techniques are shedding new light on large-scale crop growth status monitoring, especially in recent applications of unmanned aerial vehicles (UAVs). Many inversion models have been built to estimate crop growth variables. However, the present methods focused on building models for each single crop stage, and the features generally used in the models are vegetation indices (VI) or joint VI with data derived from UAV-based sensors (e.g., texture, RGB color information, or canopy height). It is obvious these models are either limited to a single stage or have an unstable performance across stages. To address these issues, this study selected four key wheat growth parameters for inversion: above-ground biomass (AGB), plant nitrogen accumulation (PNA) and concentration (PNC), and the nitrogen nutrition index (NNI). Crop data and multispectral data were acquired in five wheat growth stages. Then, the band reflectance and VI were obtained from multispectral data, along with the five stages that were recorded as phenology indicators (PIs) according to the stage of Zadok's scale. These three types of data formed six combinations (C1–C6): C1 used all of the band reflectances, C2 used all VIs, C3 used bands and VIs, C4 used bands and PIs, C5 used VIs and PIs, and C6 used bands, Vis, and PIs. Some of the combinations were integrated with PIs to verify if PIs can improve the model accuracy. Random forest (RF) was used to build models with combinations of different parameters and evaluate the feature importance. The results showed that all models of different combinations have good performance in the modeling of crop parameters, such as R2 from 0.6 to 0.79 and NRMSE from 10.51 to 15.83%. Then, the model was optimized to understand the importance of PIs. The results showed that the combinations that integrated PIs showed better estimations and the potential of using PIs to minimize features while still achieving good predictions. Finally, the varied model results were evaluated to analyze their performances in different stages or fertilizer treatments. The results showed the models have good performances at different stages or treatments (R2 > 0.6). This paper provides a reference for monitoring and estimating wheat growth parameters based on UAV multispectral imagery and phenology information. [ABSTRACT FROM AUTHOR]

Crop residue is an important component of farmland ecosystems, which is of great significance for increasing soil organic carbon, mitigating wind erosion and water erosion and conserving soil and water. Crop residue coverage (CRC) is an important parameter to characterize the number and distribution of crop residues, and also a key indicator of conservation tillage. In this study, the CRC of wheat was taken as the research object. Based on the high-resolution GF-1 satellite remote sensing imagery from China, decision tree (DT), gradient boosting decision tree (GBDT), random forest (RF), least absolute shrinkage and selection operator (LASSO), extreme gradient boosting regression (XGBR) and other machine learning algorithms were used to carry out the estimation of wheat CRC by remote sensing. In addition, the comparisons with sentinel-2 imagery data were also utilized to assess the potential of GF satellite data for CRC estimates. The results show the following: (1) Among the spectral indexes using shortwave infrared characteristic bands from sentinel-2 imagery, the dead fuel index (DFI) was the best for estimating wheat CRC, with an R2 of 0.54 and an RMSE of 10.26%. The ratio vegetation index (RVI) extracted from visible and near-infrared characteristic bands from GF-1 data performed the best, with an R2 of 0.46 and an RMSE of 11.39%. The spectral index extracted from GF-1 and sentinel-2 images had a significant response relationship with wheat residue coverage. (2) When only the characteristic bands from the visible and near-infrared spectral ranges were applied, the effects of the spatial resolution differences of different images on wheat CRC had to be taken into account. The estimations of wheat CRC with the high-resolution GF-1 data were significantly better than those with the Sentinel-2 data, and among multiple machine learning algorithms adopted to estimate wheat CRC, LASSO had the most stable capability, with an R2 of 0.46 and an RMSE of 11.4%. This indicates that GF-1 high-resolution satellite imagery without shortwave infrared bands has a good potential in applications of monitoring crop residue coverage for wheat, and the relevant technology and method can also provide a useful reference for CRC estimates of other crops. [ABSTRACT FROM AUTHOR]

Vertical heterogeneity of the biochemical characteristics of crop canopy is important in diagnosing and monitoring nutrition, disease, and crop yield via remote sensing. However, the research on vertical isomerism was not comprehensive. Experiments were carried out from the two levels of simulation and verification to analyze the applicability of this recently development model. Effects of winter wheat on spectrum were studied when input different structure parameters (e.g., leaf area index (LAI)) and physicochemical parameters (e.g., chlorophyll content ( C h l a + b ) and water content ( C w )) to the mSCOPE (Soil Canopy Observation, Photochemistry, and Energy fluxes) model. The maximum operating efficiency was 127.43, when the winter wheat was stratified into three layers. Meanwhile, the simulation results also proved that: the vertical profile of LAI had an influence on canopy reflectance in almost all bands; the vertical profile of C h l a + b mainly affected the reflectivity of visible region; the vertical profile of C w only affected the near-infrared reflectance. The verification results showed that the vegetation indexes (VIs) selected of different bands were strongly correlated with the parameters of the canopy. LAI, C h l a + b and C w affected VIs estimation related to LAI, C h l a + b and C w respectively. The Root Mean Square Error (RMSE) of the new-proposed N D V I g r e e n was the smallest, which was 0.05. Sensitivity analysis showed that the spectrum was more sensitive to changes in upper layer parameters, which verified the rationality of mSCOPE model in explaining the law that light penetration in vertical nonuniform canopy gradually decreases with the increase of layers. [ABSTRACT FROM AUTHOR]

The nitrogen nutrition index (NNI) is a quantitative and reliable indicator of the nitrogen nutrition distribution or status of crops. The timely and accurate estimation of the NNI is crucial in agriculture management. In this study, the quantitative analysis and hyperspectral remote sensing modelling of the NNI were conducted, in which the hyperspectral remote sensing data and NNI data at different growth stages of winter wheat were measured using ground and unmanned aerial vehicle (UAV) carrying high spectrometer equipment. First, the NNIs of the four growth stages of winter wheat were calculated and statistically analyzed. Then, the hyperspectral characteristics at different growth stages and various NNIs were examined. Second, the representation wavebands of the hyperspectral data, which were sensitive to the NNI of winter wheat, were acquired and evaluated. In addition, hyperspectral models were established and comparatively assessed for the NNI estimation. Finally, the hyperspectral characteristics and the remote sensing estimation of the NNIs were determined on the basis of UAV-based hyperspectral data. The results are as follows. (1) As the NNIs of winter wheat changed, the characteristic of the red shift, the variations in the red edge position, and the near-infrared waveband range of the hyperspectral data became apparent. (2) The green band, red edge, and near-infrared were sensitive to the NNIs of winter wheat, and they could be effectively used for estimating the NNI. Moreover, the multiple statistical regression models, which were based on representative wavebands, performed well in estimating the NNI results for the different growth stages of winter wheat. [ABSTRACT FROM AUTHOR]

Grain protein content (GPC) is an important indicator of wheat quality. Earlier estimation of wheat GPC based on remote sensing provided effective decision to adapt optimized strategies for grain harvest, which is of great significance for agricultural production. The objectives of this field study are: (i) To assess the ability of spectral vegetation indices (VIs) of Sentinel 2 data to detect the wheat nitrogen (N) attributes related to the grain quality of winter wheat production, and (ii) to examine the accuracy of wheat N status and GPC estimation models based on different VIs and wheat nitrogen parameters across Analytical Spectra Devices (ASD) and Unmanned Aerial Vehicle (UAV) hyper-spectral data-simulated sentinel data and the real Sentinel-2 data. In this study, four nitrogen parameters at the wheat anthesis stage, including plant nitrogen accumulation (PNA), plant nitrogen content (PNC), leaf nitrogen accumulation (LNA), and leaf nitrogen content (LNC), were evaluated for their relationship between spectral parameters and GPC. Then, a multivariate linear regression method was used to establish the wheat nitrogen and GPC estimation model through simulated Sentinel-2A VIs. The coefficients of determination ( R 2 ) of four nitrogen parameter models were all greater than 0.7. The minimum R 2 of the prediction model of wheat GPC constructed by four nitrogen parameters combined with VIs was 0.428 and the highest R 2 was 0.467. The normalized root mean square error (nRMSE) of the four nitrogen estimation models ranged from 26.333% to 29.530% when verified by the ground-measured data collected from the Beijing suburbs, and the corresponding nRMSE for the GPC-predicted models ranged from 17.457% to 52.518%. The accuracy of the estimated model was verified by UAV hyper-spectral data which had resized to different spatial resolution collected from the National Experimental Station for Precision Agriculture. The normalized root mean square error (nRMSE) of the four nitrogen estimation models ranged from 16.9% to 37.8%, and the corresponding nRMSE for the GPC-predicted models ranged from 12.3% to 13.2%. The relevant models were also verified by Sentinel-2A data collected in 2018 while the minimum nRMSE for GPC invert model based on PNA was 7.89% and the maximum nRMSE of the GPC model based on LNC was 12.46% in Renqiu district, Hebei province. The nRMSE for the wheat nitrogen estimation model ranged from 23.200% to 42.790% for LNC and PNC. These data demonstrate that freely available Sentinel-2 imagery can be used as an important data source for wheat nutrition and grain quality monitoring. [ABSTRACT FROM AUTHOR]

Plant nitrogen (N) information has widely been estimated through empirical techniques using hyperspectral data. However, the physical model inversion approach on N spectral response has seldom developed and remains a challenge. In this study, an N-PROSAIL model based on the N-based PROSPECT model and the SAIL model canopy model was constructed and used for retrieving crop N status both at leaf and canopy scales. The results show that the third parameter (3rd-par) retrieving strategy (leaf area index (LAI) and leaf N density (LND) optimized where other parameters in the N-PROSAIL model are set at different values at each growth stage) exhibited the highest accuracy for LAI and LND estimation, which resulted in R2 and RMSE values of 0.80 and 0.69, and 0.46 and 21.18 µg·cm−2, respectively. It also showed good results with R2 and RMSE values of 0.75 and 0.38% for leaf N concentration (LNC) and 0.82 and 0.95 g·m−2 for canopy N density (CND), respectively. The N-PROSAIL model retrieving method performed better than the vegetation index regression model (LNC: RMSE = 0.48 − 0.64%; CND: RMSE = 1.26 − 1.78 g·m−2). This study indicates the potential of using the N-PROSAIL model for crop N diagnosis on leaf and canopy scales in wheat. [ABSTRACT FROM AUTHOR]

• Optimized multiple lookup tables (Multi-LUTs) for improving computing efficiency and estimation accuracy. • Multi-LUTs method based on the N-PROSAIL model for canopy nitrogen density estimation. • Canopy nitrogen density estimation from field and UAV hyperspectral data. Unmanned aerial vehicle (UAV) based hyperspectral images linked to a radiative transfer model can provide a promising approach for high throughput monitoring of plant nitrogen (N) status. In this study, multiple lookup tables (Multi-LUTs), each LUT corresponding to one growth stage, were constructed based on the N-PROSAIL model, a radiative transfer model, and LUT size was optimized for improving computing efficiency. The objective is to use the constructed Multi-LUTs for estimating canopy N density (CND) in winter wheat. Results suggest that Multi-LUTs of leaf area index, leaf N density and two spectral indices (MSR and MCARI/MTVI2) in winter wheat demonstrate good performance of CND estimation; and LUTs with the optimal size of 6000 rows can yield good accuracy. The R2 and nRMSE values of the regression relationship between estimated and measured CND were 0.83 and 0.23 from field hyperspectral data, and 0.69 and 0.27 from UAV based hyperspectral imagery during the 2014–2015 growing season. CND by Multi-LUTs method was also accurately estimated from field hyperspectral data during the 2013–2014 growing season, with R2 and nRMSE values of 0.74 and 0.26. The estimation accuracy of CND based UAV data was a slightly lower than based field data. The resultant thematic CND map accurately exhibits CND variability at varying spatial and temporal scales. Results from this study confirmed the potential of combining UAV based hyperspectral imagery and physical optics approach for estimating CND in winter wheat. [ABSTRACT FROM AUTHOR]

Highlights • Dynamic model of the DSSAT-CERES model for wheat production. • GLUE with a systematic approach for well calibrating parameters in DSSAT-CERES model. • Crop variables in time series were in agreement with measured values. • DSSAT-CERES model as optimization management tool in agriculture. Abstract Crop growth models integrate genotype, environment and management and can serve as an analytical tool by which to study the influences of these factors on crop growth, production, and agricultural planning. Parameter calibration is the primary step taken before the local application of crop growth models. In this study, experimental field data were collected by way of a five-year (2008–2013) set of field experiments at a field site in Beijing, China. The DSSAT-CERES model was calibrated by integrating the generalized likelihood uncertainty estimation (GLUE) method and a systematic approach, and used experimental data relating to two seasons 2009/2010 and 2012/2013. The calibrated model was evaluated for its prediction performance using experimental data relating to the three seasons 2008/2009, 2010/2011 and 2011/2012. The results showed that the GLUE method can accurately estimate the genotype parameters of wheat; that the simulated leaf area index (LAI), aboveground biomass (AGB), aboveground nitrogen (AGN) and grain yield (GY) were close to the measured values; and that the DSSAT-CERES-Wheat model can be used to schedule wheat seed sowing dates, and optimize N fertilizer application in areas around Beijing. In general, the DSSAT-CERES-Wheat model was proved to be a useful decision-making tool for winter wheat production in the Beijing area. [ABSTRACT FROM AUTHOR]

Vertical heterogeneity of the canopy is being increasingly recognized in remote estimates of vegetative properties. Given the current limited knowledge of this issue, this paper investigated the effects of different vertical distributions of crop structure [e.g., leaf angle (LA) and leaf area index (LAI)] and biochemical parameters [e.g., chlorophyll a and b content (\textChl{a+{b}}) and water content (Wc)] on canopy reflectance and vegetation indices (VIs). A recently developed multiple-layer canopy reflectance model (MRTM) was tested for winter wheat and used to run a simulation analysis of different canopy scenarios. The results showed that the MRTM performed well to model winter wheat canopy reflectance with regard to spikes and vertical distributions of leaf properties. The vertical profiles of LA and LAI influenced canopy reflectance at almost all wavelengths, whereas the vertical profile of \textChl{a+{b}} mainly affected reflectance in the visible region, and that of Wc only affected reflectance in the near-infrared region. Changes in vertical distribution of the LA resulted in clear variations in VIs related to the LA, LAI, and \textChl{a+{b}} estimates. The vertical LAI and \textChl{a+{b}} profiles mainly influenced the VIs related to the LAI and \textChl{a+{b}} estimates. The Wc vertical profile primarily affected the VIs used to estimate crop water properties. The sensitivities of the VIs were mainly associated with the spectral responses and penetration characteristics of the bands they used. These findings suggest that the sensitivity of VIs to the vertical distributions of crop parameters should be considered when establishing models for remote crop monitoring. [ABSTRACT FROM PUBLISHER]

Coupling remote sensing data with a crop growth model has become an effective tool for estimating grain yields and assessing grain quality. In this study, a data assimilation approach using a particle swarm optimization algorithm was developed to integrate remotely sensed data into the DSSAT-CERES model for estimating the grain yield and protein content of winter wheat. Our results showed that the normalized difference red edge index (NDRE) produced the most accurate selection of spectral indices for estimating canopy N accumulation (CNA), with R 2 and RMSE values of 0.663 and 34.05 kg ha −1 , respectively. A data assimilation method ( R 2 = 0.729 and RMSE = 32.02 kg ha −1 ) performed better than the spectral indices method for estimation of canopy N accumulation. Simulation of grain yield by the data assimilation method agreed well with the measured grain yield, with R 2 and RMSE values of 0.711 and 0.63 t ha −1 , respectively. Estimating grain protein content by gluten type could improve the estimation accuracy, with R 2 and RMSE of 0.519 and 1.53%, respectively. Our study showed that estimating wheat grain yield, and especially quality, could be successfully accomplished by assimilating remotely sensed data into the DSSAT-CERES model. [ABSTRACT FROM AUTHOR]

Timely monitoring of above-ground biomass (AGB) is essential for indicating the crop growth status and predicting grain yield and carbon dynamics. Non-destructive remote sensing techniques with a large spatial coverage have become a promising method for crop biomass monitoring. However, most existing crop biomass models have only been tested at a single growth stage or only at a small number of growth stages at a single location. This has limited the ability of these AGB models to be transferred spatially, to other fields or regions, to predict AGB at any growth stage during the season, or to be potentially used with data from other sensing systems. Here, a new crop biomass algorithm (CBA-Wheat) was developed to estimate AGB over the entire growing season. It uses information on the crop growth stage, based on phenological scale observations (Zadoks scale or ZS), the day of the year or thermal indices (growing degree days), to correct AGB estimations from remotely sensed vegetation indices. The model transferability was evaluated across multiple regional test sites and different data sources (UAV and hand-held spectroscopic data). Results showed that the coefficient values [slope (k) and intercept (b) ] of ordinary least squares regression (OLSR) of AGB with vegetation indices had a strong relationship with ZS. These k and b relationships were used to correct the OLSR model parameters based on the observed phenological stage (ZS value). The two-band enhanced vegetation index (EVI2) was the best vegetation index for predicting AGB with the new CBA-Wheat ZS model, with R2 and RMSE values of 0.83 and 2.07 t/ha for an experimental trial site, 0.78 and 2.05 t/ha for multiple independent regional test sites, and 0.69 and 1.87 t/ha when transferred to EVI2 derived from UAV. Model performance was lower with the day of the year and thermal index corrections; however, the use of relative growing degree-days (RGS; CBA-Wheat RGS), instead of ZS information, to adjust the model parameters showed a high consistency with the CBA-Wheat ZS model, and a good potential for estimation of AGB at regional scales without the need for local phenological observations. The CBA-Wheat RGS had validated R2 and RMSE values of 0.82 and 2.01 t/ha for the experimental trial site, 0.76 and 2.39 t/ha for multiple independent regional test sites, and 0.66 and 2.14 t/ha for UAV hyperspectral imagery. These results demonstrated a good potential to estimate biomass from remotely sensed imagery at varying spatio-temporal scales in winter wheat. • A model for wheat crop biomass based on a single evolving relationship with phenological period was developed. • Biomass prediction can be achieved by combining phenological information and remote sensing data. • Model transferability at varying spatio-temporal scales and to different remote sensing data sources was tested successfully. [ABSTRACT FROM AUTHOR]

Leaf area index (LAI) and leaf chlorophyll content (LCC) are major considerations in management decisions, agricultural planning, and policy-making. When a radiative transfer model (RTM) was used to retrieve these biophysical variables from remote-sensing data, the ill-posed problem was unavoidable. In this study, we focused on the use of agronomic prior knowledge (APK), constructing the relationship between LAI and LCC, to restrict and mitigate the ill-posed inversion results. For this purpose, the inversion results obtained using the SAILH+PROSPECT (PROSAIL) canopy reflectance model alone (no agronomic prior knowledge, NAPK) and those linked with APK were compared. The results showed that LAI inversion had high accuracy. The validation results of the root mean square error (RMSE) between measured and estimated LAI were 0.74 and 0.69 for NAPK and APK, respectively. Compared with NAPK, APK improved LCC estimation; the corresponding RMSE values of NAPK and APK were 13.36 µg cm–2and 9.35 µg cm–2, respectively. Our analysis confirms the operational potential of PROSAIL model inversion for the retrieval of biophysical variables by integrating APK. [ABSTRACT FROM PUBLISHER]

Nitrogen has significant effect on the growth and development in crop, the formation of yield and quality. Precision diagnosis and dynamic regulation of crop is the important content and scientific basis of precision agriculture. Thus, predicting crop N status accurately and applying appropriate rate N to crop are the focus for many studies in agricultural sciences. The crop canopy nitrogen status estimation based on spectroscopy is important tool for crop nitrogen management, but its accuracy of estimation is often affected by other factors such as canopy structures. The nitrogen nutrition index (NNI) was sensitive to nitrogen status because it combined the information of plant nitrogen content, the individual character of crop and biomass, and the group character of crop. The traditional methods for calculation of plant N concentration and aboveground biomass are done manually and they are time consuming. Thus, it is hard to apply NNI in precise farming. Recently, it has been documented remote sensing technology can be used to assess many biophysical and biochemical variable of crops, especially through spectral indices. NNI was considered a good indicator of crop nitrogen status and provided new opportunities for hyperspectral applications. The objective of this study was on the NNI estimation through remote sensing spectral parameters sensitive to leaf N content and canopy nitrogen density (CND). Based on the field experiments of different N rates and varieties of winter wheat from booting to filling stages, the relationships between spectral indices and leaf N and CND status in wheat were analyzed to determine the key spectral indices for assessment of leaf N content and CND. These relationships can help accurately quantitative diagnosis of nitrogen status, and provide the reference for the estimation of fertilizer rate and crop yield and quality. Upon the analysis the empirical model for NNI estimation based on the optimal parameters of leaf N and CND was established and evaluated. The results showed that, Red edge position based on linear interpolation method (REPLI), modified red edge simple ratio index (mSR705), ratio index-1dB (RI-1dB), simple ratio pigment index (SRPI), Vogelman red edge index (VOG) and other indicators had a good correlation with winter wheat nitrogen nutrition (r⩾0.85), and this correlation was not affected by growing period. Therefore, they can be used to evaluate the nutritional status of canopy nitrogen inversion. Then the optimal spectral parameters were selected and the nitrogen index regression models were established. Independent experimental data was used for model validation. The results showed that REPLI in the nitrogen nutrition index estimation performed better (r=0.927, p<0.01), and the model estimation accuracy was high (R2=0.859, RMSE=0.078). Our research indicated that NNI had advantages in the field crop nitrogen nutrition diagnosis, and it had potential in qualitative and quantitative diagnosis of nitrogen nutrition status by hyperspectral inversion. [ABSTRACT FROM AUTHOR]

Timely and accurate forecasting of crop grain protein content (GPC) is helpful in planning to acquire the desired target protein levels. A geographically weighted regression (GWR) model was estimated based on meteorological factors to predict the winter wheat GPC at the county level. In the Huang-Huai-Hai region, the grain protein content of winter wheat increased by 0.29% for every 1° increase in latitude. GPC prediction with this model was more precise than that of the multiple linear regressions (MLR) model. The correlation coefficient (R) and Akaike information criterion (AIC) value ranges were 0.26 ~ 0.66 and 1573.86 ~ 1710.70 for the GWR, and 0.06 ~ 0.46 and 1670.18 ~ 1939.76 for the MLR, respectively. Except for radiation in March (RAD03), radiation in April (RAD04) and radiation in May (RAD05), the sensitivity index of other monthly weather indicators to GPC had a high correlation with latitude. With 36° north latitude (L) as the limit, the correlation between RAD03 (R L<36 ° = 0.36, R L>36 ° = −0.29), RAD04 (R L<36 ° = 0.31, R L>36 ° = −0.35) and RAD05 (R L<36 ° = 0.20, R L>36 ° = −0.20) with latitude all showed an opposite trend. We highlight that spatial information needs to be considered when predicting county-level winter wheat GPC. • The grain protein content (GPC) is positively correlated with latitude. • The effect of meteorological factors on winter GPC showed spatial heterogeneity. • Geographically weighted model has advantages in winter GPC in heterogeneous region. [ABSTRACT FROM AUTHOR]

Highlights: [•] We detected yellow rust in winter wheat with hyperspectral data. [•] Disease sensitive features were extracted by continuous wavelet analysis. [•] Wavelet features outperformed conventional spectral features in disease detection. [•] The disease can be better detected at Zodaks 70 stage than Zodaks 37 stage. [ABSTRACT FROM AUTHOR]

• Develop a within-growing season yield forecast system with random forest model. • Random forest model performs well in predicting grain yield in China. • We identified the most important stage-specific predictors determining crop yield. • The most important variable influencing yields varied with crop types. Accurate and timely crop yield forecasts can provide essential information to make conclusive agricultural policies and to conduct investments. Recent studies have used different machine learning techniques to develop such yield forecast systems for single crops at regional scales. However, no study has used multiple sources of environmental predictors (climate, soil, and vegetation) to forecast yields for three major crops in China. In this study, we adopted 7-year observed crop yield data (2013–2019) for three major grain crops (wheat, maize, and rice) across China, and three major data sets including climate, vegetation indices, and soil properties were used to develop a dynamic yield forecasting system based on the random forest (RF) model. The RF model showed good performance for estimating yields of all three crops with correlation coefficient (r) higher than 0.75 and normalized root means square errors (nRMSE) lower than 18.0%. Our results also showed that crop yields can be satisfactorily forecasted at one to three months prior to harvest. The optimum lead time for yield forecasting depended on crop types. In addition, we found the major predictors influencing crop yield varied between crops. In general, solar radiation and vegetation indices (especially during jointing to milk development stages) were identified as the main predictor for winter wheat; vegetation indices (throughout the growing season) and drought (especially during emergence to tasseling stages) were the most important predictors for spring maize; soil moisture (throughout the growing season) was the dominant predictor for summer maize, late rice, and mid rice; precipitation (especially during booting to heading stages) was the main predictor for early rice. Our study provides insights into practical crop yield forecasting and the understanding of yield response to environmental conditions at a large scale across China. The methods undertaken in this research can be easily implemented in other countries with available information on climate, soil, and vegetation conditions. [ABSTRACT FROM AUTHOR]

Above-ground biomass (AGB) and the leaf area index (LAI) are important indicators for the assessment of crop growth, and are therefore important for agricultural management. Although improvements have been made in the monitoring of crop growth parameters using ground- and satellite-based sensors, the application of these technologies is limited by imaging difficulties, complex data processing, and low spatial resolution. Therefore, this study evaluated the use of hyperspectral indices, red-edge parameters, and their combination to estimate and map the distributions of AGB and LAI for various growth stages of winter wheat. A hyperspectral sensor mounted on an unmanned aerial vehicle was used to obtain vegetation indices and red-edge parameters, and stepwise regression (SWR) and partial least squares regression (PLSR) methods were used to accurately estimate the AGB and LAI based on these vegetation indices, red-edge parameters, and their combination. The results show that: (i) most of the studied vegetation indices and red-edge parameters are significantly highly correlated with AGB and LAI; (ii) overall, the correlations between vegetation indices and AGB and LAI, respectively, are stronger than those between red-edge parameters and AGB and LAI, respectively; (iii) Compared with the estimations using only vegetation indices or red-edge parameters, the estimation of AGB and LAI using a combination of vegetation indices and red-edge parameters is more accurate; and (iv) The estimations of AGB and LAI obtained using the PLSR method are superior to those obtained using the SWR method. Therefore, combining vegetation indices with red-edge parameters and using the PLSR method can improve the estimation of AGB and LAI. [ABSTRACT FROM AUTHOR]

Crop yield is related to national food security and economic performance, and it is therefore important to estimate this parameter quickly and accurately. In this work, we estimate the yield of winter wheat using the spectral indices (SIs), ground-measured plant height (H), and the plant height extracted from UAV-based hyperspectral images (HCSM) using three regression techniques, namely partial least squares regression (PLSR), an artificial neural network (ANN), and Random Forest (RF). The SIs, H, and HCSM were used as input values, and then the PLSR, ANN, and RF were trained using regression techniques. The three different regression techniques were used for modeling and verification to test the stability of the yield estimation. The results showed that: (1) HCSM is strongly correlated with H (R2 = 0.97); (2) of the regression techniques, the best yield prediction was obtained using PLSR, followed closely by ANN, while RF had the worst prediction performance; and (3) the best prediction results were obtained using PLSR and training using a combination of the SIs and HCSM as inputs (R2 = 0.77, RMSE = 648.90 kg/ha, NRMSE = 10.63%). Therefore, it can be concluded that PLSR allows the accurate estimation of crop yield from hyperspectral remote sensing data, and the combination of the SIs and HCSM allows the most accurate yield estimation. The results of this study indicate that the crop plant height extracted from UAV-based hyperspectral measurements can improve yield estimation, and that the comparative analysis of PLSR, ANN, and RF regression techniques can provide a reference for agricultural management. [ABSTRACT FROM AUTHOR]

This study aims to efficiently estimate the crop water content of winter wheat using high spatial and temporal resolution satellite-based imagery. Synthetic-aperture radar (SAR) data collected by the Sentinel-1 satellite and optical imagery from the Sentinel-2 satellite was used to create inversion models for winter wheat crop water content, respectively. In the Sentinel-1 approach, several enhanced radar indices were constructed by Sentinel-1 backscatter coefficient of imagery, and selected the one that was most sensitive to soil water content as the input parameter of a water cloud model. Finally, a water content inversion model for winter wheat crop was established. In the Sentinel-2 approach, the gray relational analysis was used for several optical vegetation indices constructed by Sentinel-2 spectral feature of imagery, and three vegetation indices were selected for multiple linear regression modeling to retrieve the wheat crop water content. 58 ground samples were utilized in modeling and verification. The water content inversion model based on Sentinel-2 optical images exhibited higher verification accuracy (R = 0.632, RMSE = 0.021 and nRMSE = 19.65%) than the inversion model based on Sentinel-1 SAR (R = 0.433, RMSE = 0.026 and nRMSE = 21.24%). This study provides a reference for estimating the water content of wheat crops using data from the Sentinel series of satellites. [ABSTRACT FROM AUTHOR]

The accurate and timely monitoring and evaluation of the regional grain crop yield is more significant for formulating import and export plans of agricultural products, regulating grain markets and adjusting the planting structure. In this study, an improved Carnegie–Ames–Stanford approach (CASA) model was coupled with time-series satellite remote sensing images to estimate winter wheat yield. Firstly, in 2009 the entire growing season of winter wheat in the two districts of Tongzhou and Shunyi of Beijing was divided into 54 stages at five-day intervals. Net Primary Production (NPP) of winter wheat was estimated by the improved CASA model with HJ-1A/B satellite images from 39 transits. For the 15 stages without HJ-1A/B transit, MOD17A2H data products were interpolated to obtain the spatial distribution of winter wheat NPP at 5-day intervals over the entire growing season of winter wheat. Then, an NPP-yield conversion model was utilized to estimate winter wheat yield in the study area. Finally, the accuracy of the method to estimate winter wheat yield with remote sensing images was verified by comparing its results to the ground-measured yield. The results showed that the estimated yield of winter wheat based on remote sensing images is consistent with the ground-measured yield, with R2 of 0.56, RMSE of 1.22 t ha−1, and an average relative error of −6.01%. Based on time-series satellite remote sensing images, the improved CASA model can be used to estimate the NPP and thereby the yield of regional winter wheat. This approach satisfies the accuracy requirements for estimating regional winter wheat yield and thus may be used in actual applications. It also provides a technical reference for estimating large-scale crop yield. [ABSTRACT FROM AUTHOR]