Search

Despite the potential of lignocellulose in manufacturing value-added chemicals and biofuels, its efficient biotechnological conversion by enzymatic hydrolysis still poses major challenges. The complex interplay between xylan, cellulose, and lignin in fibrous materials makes it difficult to assess underlying physico- and biochemical mechanisms. Here, we reduce the complexity of the system by creating matrices of cellulose, xylan, and lignin, which consists of a cellulose base layer and xylan/lignin domains. We follow enzymatic degradation using an endoxylanase by high-speed atomic force microscopy and surface plasmon resonance spectroscopy to obtain morphological and kinetic data. Fastest reaction kinetics were observed at low lignin contents, which were related to the different swelling capacities of xylan. We demonstrate that the complex processes taking place at the interfaces of lignin and xylan in the presence of enzymes can be monitored in real time, providing a future platform for observing phenomena relevant to fiber-based systems.

Transparent wood (TW) has attracted much attention in the field of energy saving building structural materials because of its high light transmittance, good thermal insulation performance and good toughness. However, the polymeric resins used in the present study to impregnate lignin-based wood templates are usually derived from petroleum-based chemical resources, which pose a fatal threat to human beings both in terms of consuming large amounts of resources and causing environmental pollution problems. It is therefore important to develop alternatives to petroleum-derived chemicals in renewable natural resources. Here, we report a green and sustainable TW production process based on the bio-recycling concept. Lignin-based sustainable resin (LSR) was prepared from waste lignin produced during delignification by polymerization of guaiacol. At the same time, according to FT-IR and NMR data analysis combined with previous studies, the synthesis mechanism of LSR was proposed, and this result provided a reference for bio-based resins made from biomass materials. The prepared lignin-based sustainable transparent wood (LSTW) has good light transmittance and good dimensional stability. In addition, the LSTW also shows good thermal insulation and indoor temperature regulation capabilities compared with the common glass., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

How to efficiently produce high performance plywood is of particular interest, while its sensitivity to moisture is overcome. This paper presents a simple and scalable strategy for the preparation of high-performance plywood based on the chemical bonding theory; a wood interfacial functionalized platform (WIFP) based on (3-aminopropyl) triethoxysilane (APTES) was established. Interestingly, the APTES-enhanced dialdehyde cellulose-based adhesive (DAC-APTES) was able to effectively establish chemically active adhesive interfaces; the dry/wet shear strength of WIFP/DAC-APTES adhesive was 3.15/1.31 MPa, which was much higher than 0.7 MPa (GB/T 9846-2015). The prepared plywood showed excellent wood-polymer interface adhesion, which exceeded the force that the wood itself could withstand. In addition, the DAC-APTES adhesive exhibits moisture evaporation-induced curing behavior at room temperature and can easily support the weight of an adult weighing 65.7 Kg. This research provides a novel approach for functionalized interface design of wood products, an effective means to prepare high-performance plywood., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work proposed a promising biorefinery method for the deconstruction of moso bamboo by using p-toluenesulfonic acid (P-TsOH) pretreatment to product high-purity cellulose (dissolving pulp). The cellulose pulp with high α-cellulose content (82.36 %) was successfully prepared for 60 min at low pretreatment temperature (90 °C) and atmospheric pressure. After the simple bleaching and cold caustic extraction (CCE) processes, the properties of cellulose pulp, such as α-cellulose content, polymerization, ISO brightness, all met the standard of dissolving pulp. In general, the cooking method through P-TsOH pretreatment can shorten the preparation time, which can effectively reduce energy consumption and chemical consumption. Therefore, this work may provide a new perspective for the green preparation of dissolving pulp that can be used to produce lyocell fiber after ash and metal ion treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This study deals with the production of natural fiber plastic composites (NFPCs) to reduce environmental pollution with agricultural and plastic waste. Where the NFPCs were prepared from waste/pure polyethylene (WPE) (pure polyethylene (50%)/recycled polyethylene (50%)) and modified sunflower waste via an eco-friendly and economic biological process. The sunflower fibers (SF) were treated via whole selective fungal isolate, namely, Rhizopus oryzae (acc no. OM912662) using two different incubation conditions; submerged (Sub), and solid-state fermentation (SSF) to enhance the fibers' compatibility with WPE. The treated and untreated fibers were added to WPE with various concentrations (10 and 20 wt%). The morphology and structure of fibers were characterised by a scanning electron microscope (SEM) and attenuated total reflection-Fourier transform infrared (ATR-FTIR). Furthermore, the mechanical properties, morphology, biodegradation and water vapour transmission rate (WVTR) for the prepared NFPCs were investigated. The results showed that compatibility, mechanical properties and biodegradation of NFPCs were improved by the addition of sunflower fibers treated by SSF conditions., (© 2022. The Author(s).)

Solar interfacial evaporation based on wood-derived materials has been considered a promising strategy for desalination and wastewater purification. Herein, we adopted delignified wood (DW) as the water transport substrate and lignosulfonate (LS)-modified narrow-band gap semiconductor nickel disulfide (NiS 2 ) as the light-absorbing agent (LS-NiS 2 ) to fabricate a high-efficiency evaporator (LS-NiS 2 @DW). On the one hand, the high absorbance (>95%) within a broad wavelength range and excellent photothermal conversion efficiency of LS-NiS 2 endow efficient solar energy utilization. On the other hand, the hydrophilicity of DW facilitates water activation, which results in a lower evaporation enthalpy of LS-NiS 2 @DW (1274.4 kJ kg -1 ) than that of pure water. By combining LS-NiS 2 and DW, LS-NiS 2 @DW achieved an evaporation rate as high as 2.80 kg m -2 h -1 under one sun irradiation (1 kW m -2 ), and the evaporation efficiency reached 87.4%. Notably, LS-NiS 2 @DW exhibits a high evaporation rate (2.42-2.69 kg m -2 h -1 ) in simulated seawater for 24 h with no salt crystals formed on the surface. Moreover, LS-NiS 2 @DW shows high antibacterial activity with about 90% reduction in bacterial survival rate. This work could provide new perspectives for the design of a high-efficiency wood-based photothermal evaporator.

In this study, densified wood was prepared by hot pressing after partial lignin and hemicellulose were removed through alkaline solution cooking. The tensile strength and elastic modulus of densified wood were improved up to 398.5 MPa and 22.5 GPa as compared with the original wood, and the characterization of its supramolecular structures showed that the crystal plane spacing of the densified wood decreased, the crystallite size increased, and the maximum crystallinity (CI) of cellulose increased by 15.05%; outstandingly, the content of O(6)H⋯O(3′) intermolecular H-bonds increased by approximately one-fold at most. It was found that the intermolecular H-bond content was significantly positively correlated with the tensile strength and elastic modulus, and accordingly, their Pearson correlation coefficients were 0.952 (p < 0.01) and 0.822 (p < 0.05), respectively. This work provides a supramolecular explanation for the enhancement of tensile strength of densified wood.

Pure deep eutectic solvents (DESs) system of choline chloride (ChCl)/Lactic acid (Lac) were demonstrated to be an effective strategy for extraction of lignin. In this study, two kinds of different promising solid acid (SA) with DESs were designed to promote the pretreatment of lignocellulose. The SA of phosphotungstic acid (H 3 O 40 PW 12 ) and iron bromide (FeBr 3 ) were introduced into DESs to extract poplar wood lignin and evaluate the antioxidant activity. It was found that 82.2% and 80.9% of lignin were obtained from poplar wood under H 3 O 40 PW 12 -ChCl/Lac acid and FeBr 3 -choline ChCl/Lac system with 4 h and 8 h, respectively. The lignin fractions with a high purity (>89%), low molecular weight (Mw 1800-2000 g/mol). Besides, the antioxidant activities of lignin fractions were better than butyl hydroxyanisole (BHA). Therefore, DES lignin has prominent antioxidant activity and could developed a potential natural cosmetics and food packaging., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Considering the toxicity of the impurities of synthesized anthraquinone, this study clarified new catalytic compounds for kraft cooking with improved carbohydrate yield and delignification and less mutagenicity, which are important for ensuring the safety of paper products in contact with food. The 2-methylanthraquinone contents of teak ( Tectona grandis ) woods were 0.18-0.21%. Acetone extracts containing 2-methylanthraquinone from Myanmar and Indonesia teak woods as additives improved lignin removal during kraft cooking of eucalyptus wood, which resulted in kappa numbers that were 2.2-6.0 points lower than the absence of additive. Myanmar extracts and 2-methylanthraquinone improved carbohydrate yield in pulps with 1.7-2.2% yield gains. Indonesia extracts contained more deoxylapachol and its isomer than 2-methylanthraquinone. The residual content of 2-methylanthraquinone in the kraft pulp was trace. Although Ames tests showed that the Indonesia and Myanmar extracts were mutagenic to Salmonella typhimurium , 2-methylanthraquinone was not. The kraft pulp obtained with the additives should be safe for food-packaging applications, and the addition of 0.03% 2-methylanthraquinone to kraft cooking saves forest resources and fossil energy in industries requiring increased pulp yield.

Transparent-wood (TW) is an emerging research topic that can be applied to biobased products. However, it is necessary to fill pores in TW with natural substances to prepare all-biobased TW. This paper reports an all-biobased TW by infiltrating cellulose nanofiber (CNF) and chitosan (CTS) suspensions into the bleached wood. CNF was isolated by combining the chemical and physical methods, and CTS was dissolved in acetic acid, and they were infiltrated into the pores of the bleached Fir veneer wood using a vacuum jar. The CNF and chitosan effects on the mechanical properties of the TW were studied, and the morphologies, crystallinity index, water contact angle, antioxidant, thermal degradation, and UV-shielding properties were investigated. The prepared TW showed 80 % total transmittance and 30-60 % haze, suitable for solar cell application. The all-biobased TW showed good thermal stability up to 315 °C and excellent UV shielding property for UV-B and UV-C. The antioxidant property of the CTS-TW significantly increased as compared to the original wood. The CNF-TW showed considerable tensile strength and yield strength of more than 200 % improved from the original wood. The potential for environment-friendly packaging applications was demonstrated by making a bag, medicine packaging, and straw for a drink., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

This study introduces a new combined method of wood impregnation and chemical pulping processes leading to the production of superparamagnetic cellulose fibers with a magnetic nanoparticle-free outer surface. First, magnetic wood chips (MWCs) were prepared by in situ synthesizing of magnetite (Fe 3 O 4 ) nanoparticles during the wood impregnation process. The MWCs were then converted into magnetic fibers by kraft pulping. The results showed that the resulting magnetic fibers had an outer surface comparable to that of non-magnetic fibers while showing superparamagnetic behavior. The XRD results confirmed that the in situ synthesized magnetic nanoparticles were magnetite. Papers made from the new type of magnetic cellulose fibers had much more desirable tensile properties, appearance, and printability than papers made from conventional magnetic cellulose fibers, comparable to those made from non-magnetic fibers., (Copyright © 2020. Published by Elsevier Ltd.)

Comparative studies of the effects of two commercial enzyme formulations on fiber refining were conducted. Extensive basic characterisation of the enzymes involved, assessment of their hydrolytic activities on different model substrates as well as on different pulps (softwood sulfate, softwood sulfite, hardwood sulfate) were evaluated. Both enzyme formulations showed endoglucanase as well as some xylanase and β-glucosidase activity. In addition, Enzyme A reached a CMC end viscosity of 19.5 mPa compared to 11.1 mPa for Enzyme B. Reducing sugar release almost doubled from 695 μmol mL -1 for hardwood sulfate pulp to 1300 μmol mL -1 for softwood sulfite pulp with Enzyme B under the same conditions. Enzyme A increased the degree of refining even under non-ideal conditions from 23 °SR to up to 50 °SR. Further characterization of hand sheets, made from enzyme pre-treated and refined cellulose fibers with Enzyme A and B, showed that Enzyme A had the best effects leading to hand sheets with increased tensile strength and low air permeability. In summary, the increase in the degree of refining seen for Enzyme A correlated to higher xylanase and β-glucosidase activity and lower endoglucanase activity., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Combining chemi-mechanical pulping with autohydrolysis pretreatment is an efficient and value-added utilization approach for lignocellulosic biomass in paper industry. To further promote the utilization of autohydrolyzed biomass in chemi-mechanical pulping, the color evolution of poplar wood chips in autohydrolysis pretreatment and its chromogenic mechanism were investigated by using CIELab color system, FT-IR, NMR and GPC. The results showed that the total color difference ΔE* increased obviously, which were remarkable as the combined hydrolysis factor (CHF) increased. The lignin content led to a more significant influence on the color of poplar wood chips than the extractives. The autohydrolysis pretreatment with a higher CHF accelerated the degradation and subsequent condensation of lignin, resulting in the formation of chromophoric groups, such as Hibbert ketone, quinones and quinone methides. It is of great significance for biomass refinery and paper industry to reveal the color evolution of poplar wood chips caused by autohydrolysis pretreatment from the point of view of chemical components' structure., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Soda process is one of the most important pulping processes in paper industry producing large quantities of alkali lignins that can afford plenty of biofuels, aromatic chemicals and materials. However, the structural and size-related heterogeneities and complexities hinder the development in these directions. Herein, we report new insights into the structure of alkali lignin, through investigating the formation and transformation of enol ether and arylglycerol structures that are significant responsible for the structural transformation from native lignin to alkali lignin. Four-type enol ethers composed of G/S units in hardwood alkali lignin were identified by 2D HSQC NMR. A series of alkali lignins prepared by alkali treatment of eucalyptus cellulolytic enzyme lignin under various temperatures were analyzed by 2D HSQC NMR, 31 P NMR and gel permeation chromatography (GPC). Upon these analyses and related model compound studies, it was found that the arylglycerols formed from native β-O-4 linkages tends to be oxidized with the further degradation of aryl ether bonds, and that the enol ether linkages are facile to be hydrolyzed or oxidized in the air. These insights improve the mechanistic understanding for the structural evolution and the diversity of alkali lignins and will aid the development of further lignin valorization strategies., Competing Interests: Declaration of competing interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This work presents a kinetic investigation of dilute sulfuric acid hydrolysis of bleached hardwood kraft pulp. The temperature-time dependence shows fast xylose extraction during the initial period of the process, while the glucose content increases slowly and permanently over the period. A conversion of xylose into furfural and furfural-derived chromophores is observed. It is established that only a low-brightness microcrystalline cellulose when a degree of polymerization below 300 can be obtained from hardwood pulp. The study of the acid hydrolysis kinetics, with respect to the degree of polymerization of microcrystalline cellulose, shows that the modified Prout-Tompkins equation describes most adequately the process. According to that kinetic model, the hydrolysis rate depends on a combination of chemical interaction and diffusion processes. It is evident that the activation energy does not change in the course of the process, i.e. the cellulose active centers do not change their activity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The aim of this work was to study the sedimentary substances formed on the surface of auto-hydrolyzed wood chips. And its potential effect on the subsequent chemical pulping was then investigated by the analysis of surface morphology, benzene-alcohol extractive, absorbability and kraft pulping of wood chips hydrolyzed. The results showed that sediments on the surface of auto-hydrolyzed wood chips were microspheric and the amount of them increased with intensifying the severity of treatment. The benzene-alcohol extractives and lignin content in the extractives increased from 1.36% and 16.42% in the control sample to 9.42% and 47.68% in the hydrolyzed wood chips at the P-factor of 808. The absorbability of hydrolyzed wood chips firstly improved in the early stage (P-factor < 306) and after then decreased. Negative effect of the sediments on the surface of hydrolyzed wood chips was found on the subsequent kraft chemical pulping and the properties of final pulp., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This study evaluated the solubility of low-processed wood fibers produced from a low temperature acid hydrotropic fractionation (AHF) in an ionic liquid (IL) 1,5-diazabicyclo[4.3.0]non-5-enium acetate (DBNH[OAc]. Unbleached wood fibers produced from AHF using p-Toluenesulfonic acid (p-TsOH) with or without post-treatments with lignin and hemicelluloses content up to 15% and 25%, respectively, were dissolved directly into the IL DBNH[OAc]. Post-AHF treatments using dilute alkaline and glycerol swelled the cellulose and partially removed residual lignin resulting in improved dissolution. Semi-quantitative 2D HSQC NMR analyses revealed that the undissolved wood fiber residues were enriched with G units and condensed S units (S cond ), demonstrating, as expected, that G units and condensed lignin substructures have a negative effect on dissolution in DBNH[OAc]. Therefore, AHF with rapid fractionation at low temperatures offers a promising advantage over existing high temperature pulp dissolving fiber (PDF) processes in terms of reducing energy input, lowering lignin content as well as reducing lignin condensation for producing man-made cellulosic fibers (MMCF)., (Published by Elsevier B.V.)

Genomic Best Linear Unbiased Prediction (GBLUP) in tree breeding typically only uses information from genotyped trees. However, information from phenotyped but non-genotyped trees can also be highly valuable. The single-step GBLUP approach (ssGBLUP) allows genomic prediction to take into account both genotyped and non-genotyped trees simultaneously in a single evaluation. In this study, we investigated the advantage, in terms of breeding value accuracy and bias, of including phenotypic observation from non-genotyped trees in a standard tree GBLUP evaluation. We compared the efficiency of the conventional pedigree-based (ABLUP), GBLUP and ssGBLUP approaches to evaluate eight growth and wood quality traits in a Eucalyptus hybrid population, genotyped with 33,398 single nucleotide polymorphisms (SNPs) using the EucHIP60k. Theoretical accuracies, predictive ability and bias were calculated by ten-fold cross validation on all traits. The use of additional phenotypic information from non-genotyped trees by means of ssGBLUP provided higher predictive ability (from 37% to 75%) and lower prediction bias (from 21% to 73%) for the genetic component of non-phenotyped but genotyped trees when compared to GBLUP. The increase (decrease) in the prediction accuracy (bias) became stronger as trait heritability decreased. We concluded that ssGBLUP is a promising breeding tool to improve accuracies and bias over classical GBLUP for genomic evaluation in Eucalyptus breeding practice., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Recently, the worldwide production of dissolving pulp has grown rapidly. Enzymatic technologies play an important role in producing high-quality dissolving pulp, due to their green, mild conditions, high specificity and efficiency. In this review, the relevant publications regarding enzyme applications for dissolving pulp are summarized. Cellulase and xylanase are two major enzymes used for this purpose. Cellulase can improve the quality of dissolving pulp, such as improving the reactivity/accessibility, controlling the intrinsic viscosity and adjusting the molecular weight. Xylanase is mainly used to increase the purity of the dissolving pulp and improve the pulp brightness. Furthermore, in order to increase the enzymatic treatment efficiency, the enzymatic technology can be combined with other techniques, including mechanical refining, fiber fractionations, alkali treatment and use of additives. The advantages, disadvantages and practical implications are analyzed. Also, the potential of other enzymes (such as laccase, mannanase) are discussed., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

When using a combination of pre-extraction and chemical pulping, a high yield of sugar recovery and minimal negative effect on the subsequent pulping step are expected. In this work, the P factor was utilized to investigate the effect of auto-hydrolysis severity on sugar recovery, removal of the main component, and impact on the kraft pulping of acacia wood chips. Using a P factor of 235, 84.34% of the polysaccharides in 14.05 g L -1 of dissolved sugars could be obtained. In addition, the soluble sugars were easily separated with a recovery yield of 3.54 g ·L -1 and Mw of 4,690 g mol -1 by direct precipitation using organic solvents. However, a maximum of 22.14 g L -1 of dissolved sugars was obtained with approximately 72.53% polysaccharides and Mw of 2,198 g mol -1 for a P factor of 601. Moreover, nearly 50% of the degraded carbohydrates remained in the auto-hydrolyzed wood chips. The decrease in the mass of pentosan, holocellulose, and klason lignin was 62, 30, and 8.76%, respectively. With intensifying severity, the screened yield and viscosity of pulps decreased markedly, whileas the Kappa number increased. No significant differences were observed in the morphology of the resultant fibers. Moreover, there was a decrease in the physical strength of the pulps due to the loss of the intrinsic strength of the pulp fibers, which in turn resulted from the cellulose damage. The combustion performance of the resultant pulping black liquor is improved due to the higher lignin content., (© 2019 American Institute of Chemical Engineers.)

Owing to their superior mechanical strength and structure similarity to the extracellular matrix, nanocelluloses as a class of emerging biomaterials have attracted great attention in three-dimensional (3D) bioprinting to fabricate various tissue mimics. Yet, when printing complex geometries, the desired ink performance in terms of shape fidelity and object resolution demands a wide catalogue of tunability on the material property. This paper describes surface engineered biomimetic inks based on cellulose nanofibrils (CNFs) and cross-linkable hemicellulose derivatives for UV-aided extrusion printing, being inspired by the biomimetic aspect of intrinsic affinity of heteropolysaccharides to cellulose in providing the ultrastrong but flexible plant cell wall structure. A facile aqueous-based approach was established for the synthesis of a series of UV cross-linkable galactoglucomannan methacrylates (GGMMAs) with tunable substitution degrees. The rapid gelation window of the formulated inks facilitates the utilization of these wood-based biopolymers as the feeding ink for extrusion-based 3D printing. Most importantly, a wide and tunable spectrum ranging from 2.5 to 22.5 kPa of different hydrogels with different mechanical properties could be achieved by varying the substitution degree in GGMMA and the compositional ratio between GGMMA and CNFs. Used as the seeding matrices in the cultures of human dermal fibroblasts and pancreatic tumor cells, the scaffolds printed with the CNF/GGMMA inks showed great cytocompatibility as well as supported the matrix adhesion and proliferative behaviors of the studied cell lines. As a new family of 3D printing feedstock materials, the CNF/GGMMA ink will broaden the map of bioinks, which potentially meets the requirements for a variety of in vitro cell-matrix and cell-cell interaction studies in the context of tissue engineering, cancer cell research, and high-throughput drug screening.

This study aimed to examine the effects of feeding kraft pulp (KP) on the growth performance, feed digestibility, and rumen fermentation of Japanese Black fattening steers. Ten Japanese Black fattening steers (aged 26 months) were randomly divided into control and KP groups. The control group (n = 5) was fed concentrate feed without KP, and the KP group (n = 5) was fed concentrate feed containing 10% KP. Both the groups were provided rice straw as roughage. The experiment was conducted over a period of 12 weeks. There was no significant difference in dry matter intake, daily body weight gain, and nutrient digestibility between both groups. No difference was observed in the ruminal concentrations of volatile fatty acids among the groups. At weeks 8 and 12 after the onset of the experiment, the acetate-to-propionate ratio in the ruminal fluid of the KP group was significantly higher than that of the control group. The average daily pH of ruminal fluid and activity of ruminal lipopolysaccharide did not differ between the groups. Our results suggested that the growth performance and feed digestibility in the Japanese Black fattening steers were not influenced by replacing concentrate feed with KP., (© 2019 The Authors. Animal Science Journal published by John Wiley & Sons Australia, Ltd on behalf of Japanese Society of Animal Science.)

Porous carbon electrodes have emerged as important cathode materials for metal-air battery systems. However, most approaches for fabricating porous carbon electrodes from biomass are highly energy inefficient as they require the breaking down of the biomass and its subsequent reconstitution into powder-like carbon. Here, enzymes are explored to effectively hydrolyze the partial cellulose in bulk raw wood to form a large number of nanopores, which helps to maximally expose the inner parts of the raw wood to sufficiently dope nitrogen onto the carbon skeletons during the subsequent pyrolysis process. The resulting carbons exhibit excellent catalytic activity with respect to the oxygen reduction and oxygen evolution reactions. As-fabricated cellulose-digested, carbonized wood plates are mechanically strong, have high conductivity, and contain a crosslinked network and natural ion-transport channels and can be employed directly as metal-free electrodes without carbon paper, polymer binders, or carbon black. When used as metal-free cathodes in zinc-air batteries, they result in a specific capacity of 801 mA h g -1 and an energy density of 955 W h kg -1 with the long-term stability of the batteries being as high as 110 h. This work paves the way for the ready conversion of abundant biomass into high-value engineering products for energy-related applications., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

As a traditional medicinal herb and valuable natural spice in China, Aquilaria sinensis (Lour.) Gilg has many significant pharmacological effects. Agarwood is the resinous heartwood acquired from wounded A. sinensis trees, and is widely used in pharmaceuticals owing to its excellent medicinal value. In this study, the chemical composition of volatile components and alcohol extracts from different organs of A. sinensis and agarwoods grown in different regions were investigated using GC-MS. The results showed that Vietnam agarwood had the highest moisture content, which was attributed to the local climate, while the fruit and bark of A. sinensis had higher moisture contents than the other organs. The volatile components of A. sinensis organs included 3-ethyl-5-(2-ethylbutyl)-octadecane, oleic acid 3-(octadecyloxy) propyl ester, and docosanoic acid 1,2,3-propanetriyl ester, while the alcohol extracts of A. sinensis organs contained benzoic acid ethyl ester, hexadecanoic acid ethyl ester, oleic acid, and n -hexadecanoic acid. Furthermore, the main active ingredients in agarwood from different habitats were sesquiterpenoids, aromatic species, and chromone compounds. The role of chromone compound 2-phenylethyl-benzopyran as an elicitor and the mechanism of agarwood formation were also investigated. Antioxidant tests showed that essential oils from agarwood and A. sinensis had antioxidant capacities by comparison with butylated hydroxytoluene and vitamin E. An antibacterial activity test showed that the inhibition effect of the essential oil was better against Gram-positive bacteria than against Gram-negative bacteria.

Background: Wood basic density (WBD), the biomass of plant cell walls per unit volume, is an important trait for elite tree selection in kraft pulp production. Here, we investigated the correlation between WBD and wood volumes or wood properties using 98 open-pollinated, 2.4 to 2.8 year-old hybrid Eucalyptus (Eucalyptus urophylla x E. grandis). Transcript levels of lignocellulose biosynthesis-related genes were studied., Results: The progeny plants had average WBD of 516 kg/m 3 with normal distribution and did not show any correlations between WBD and wood volume or components of α-cellulose, hemicellulose and Klason lignin content. Transcriptomic analysis of two groups of five plants each with high (570-609 kg/m 3 ) or low (378-409 kg/m 3 ) WBD was carried out by RNA-Seq analysis with total RNAs extracted from developing xylem tissues at a breast height. Lignocellulose biosynthesis-related genes, such as cellulose synthase, invertase, cinnamate-4-hydroxylase and cinnamoyl-CoA reductase showed higher transcript levels in the high WBD group. Among plant cell wall modifying genes, increased transcript levels of several expansin and xyloglucan endo-transglycosylase/hydrolase genes were also found in high WBD plants. Interestingly, strong transcript levels of several cytoskeleton genes encoding tubulin, actin and myosin were observed in high WBD plants. Furthermore, we also found elevated transcript levels of genes encoding NAC, MYB, basic helix-loop-helix, homeodomain, WRKY and LIM transcription factors in the high WBD plants. All these results indicate that the high WBD in plants has been associated with the increased transcription of many genes related to lignocellulose formation., Conclusions: Most lignocellulose biosynthesis related genes exhibited a tendency to transcribe at relatively higher level in high WBD plants. These results suggest that lignocellulose biosynthesis-related genes may be associated with WBD.

The reactivity enhancement and viscosity control are of practical importance during the manufacture of high-quality cellulose (also known as dissolving pulp). In the study, the concept of using phosphotungstic acid (HPW) for this purpose was demonstrated. The Fock reactivity of resultant pulp increased from 49.1% to 74.1% after the HPW catalytic treatment at a dosage of 86.4 mg HPW/g odp. The improved results can be attributed to the increased fiber accessibility, thanks to the favorable fiber morphologic changes, such as increased pore volume/size, water retention value and specific surface area. HPW can be readily recycled/reused by evaporating method, where maintaining 87.1% catalytic activity after six recycle times. The HPW catalytic treatment concept may provide a green alternative for the manufacture of high-quality dissolving pulp., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The effective separations of cellulose and hemicelluloses from cellulosic fibers are the prerequisite for creating high-value to the abundant and green cellulose materials. In this study, the process concept of cellulase pretreatment, followed by a cold caustic extraction (CCE) was investigated for a softwood sulfite pulp. The results showed that the cellulase pretreatment led to favorable fiber morphological changes, including the increases of the specific surface area (SSA), pore volume and diameter, and the water retention value (WVR). These changes can induce more pronounced fiber swelling in the subsequent CCE process so that the hemicelluloses removal is enhanced. After the cellulase pretreatment (cellulase dosage of 1 mg/g) and CCE process, the cellulose purity was as high as 97.49%, while the hemicelluloses removal selectivity reached 76.42%., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The alcoholic depolymerization and Mannich reaction were conducted to improve the chemical activity of biorefinery technical lignins and introduce amino groups into lignins, respectively. To understand the chemical structural transformations and examine the reaction mechanism, GPC and solution-state NMR techniques were performed. Element analysis was also used to quantify the amount of amine groups. The NMR characterization the depolymerized lignins indicated of the depolymerization, demethoxylation, and bond cleavage of linkages occurred during the depolymerization process. Results showed that the depolymerization temperature instead of the addition of capping reagents was the main factor for improving the reactivity of lignin under the given conditions. The Mannich reaction was very selective, primarily occurred at H 3,5 and G 5 positions, and the H units present a higher chemical reactivity. It is believed that the understanding of the fundamental chemistry of lignin during depolymerization and Mannich reaction process will contribute to the extension of high value-added applications of biorefinery lignin., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this work, the pulp fibers were enzymolyzed to prepare the nanosized cellulose (NC). The as-prepared samples were characterized by optical microscopy, electron microscopy, and Raman spectra. The experimental results indicated that enzymatic hydrolysis of pulp fibers could produce the spherical NC with a mean particle size of about 30nm, which had the excellent monodispersity and uniformity. When the concentration of complex enzymes was 20u/mL (cellulase: xylanase=9: 1), the yield of NC was 13.6%. The single cellulase was used, even if the enzyme concentration reached up to 200u/mL, only a mixture of strip and granular flocculation were obtained. The positive synergistic effect between xylanase and cellulase could be due to the enzymolysis of hemicellulose located on the cellulose microfibers to be favorable of cutting and splitting of the microfibers by the endoglucanase in cellulase., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Knowledge gaps in the biosafety data of the nanocellulose (NC) for biomedical use through various routes of administration call for closer look at health and exposure evaluation. This work evaluated the potentially immunogenic contaminants levels, for example, endotoxin and (1,3)-β-d-glucan, in four representative NCs, that is, wood-based NCs and bacterial cellulose (BC). The hot-water extracts were analyzed with ELISA assays, HPSEC-MALLS, GC, and NMR analysis. Varying levels of endotoxin and (1,3)-β-d-glucan contaminats were found in these widely used NCs. Although the β-(1,3)-d-glucan was not detected from the NMR spectra due to the small extract samples amount (2-7 mg), the anomerics and highly diastereotopic 6-CH 2 signals may suggest the presence of β-(1,4)-linkages with β-(1,6) branching in the polysaccharides of NCs' hot-water extracts, which were otherwise not detectable in the enzymatic assay. In all, the article highlights the importance of monitoring various water-soluble potentially immunogenic contaminants in NC for biomedical use.

The impacts of white-rot fungi on altering wood chemistry have been studied mostly in vitro. However, in vivo approaches may enable better assessment of the nature of interactions between saprotrophic fungi and host tree in nature. Hence, decayed and sound wood samples were collected from a naturally infected tree (Carpinus betulus L.). Fruiting bodies of the white rot fungus Trametes versicolor grown on the same tree were identified using rDNA ITS sequencing. Chemical compositions (cellulose and lignin) of both sound and infected wood were studied. FT-IR spectroscopy was used to collect spectra of decayed and un-decayed wood samples. The results of chemical compositions indicated that T. versicolor reduced cellulose and lignin in similar quantities. Fungal activities in decayed wood causes serious decline in pH content. The amount of alcohol-benzene soluble extractives was severely decreased, while a remarkable increase was found in 1% sodium hydroxide soluble and hot water extractive contents in the decayed wood samples, respectively. FT-IR analyses demonstrated that T. versicolor causes simultaneous white rot in the hornbeam tree in vivo which is in line with in vitro experiments.

The current study aims to demonstrate the influence of the surface chemistry of wood-derived cellulose nanofibril (CNF) hydrogels on fibroblasts for tissue engineering applications. TEMPO-mediated oxidation or carboxymethylation pretreatments were employed to produce hydrogels with different surface chemistry. This study demonstrates the following: first, the gelation of CNF with cell culture medium and formation of stable hydrogels with improved rheological properties; second, the response of mouse fibroblasts cultured on the surface of the hydrogels or sandwiched within the materials with respect to cytotoxicity, cell attachment, proliferation, morphology, and migration. Indirect cytotoxicity tests showed no toxic effect of either hydrogel. The direct contact with the carboxymethylated hydrogel adversely influenced the morphology of the cells and limited their spreading, while typical morphology and spreading of cells were observed with the TEMPO-oxidized hydrogel. The porous fibrous structure may be a key to cell proliferation and migration in the hydrogels.

Dilute acid pre-extraction enhanced the mechanically refined poplar pulp substrates' enzymatic hydrolysis efficiency obviously. The results showed that the surface lignin distribution was changed significantly in residual wood chips and pulp substrates, and the surface lignin distribution showed important impact on the following enzymatic hydrolysis. Acid pre-extraction can lead to a redistribution of lignin in fiber cell walls, i.e., the lignin was degraded and migrated to fiber surface in the form of re-deposited lignin and pseudo-lignin. However, higher pre-extraction intensity was not desired due to the formation of redeposited lignin and pseudo-lignin. This study will help to reach a deeper understanding on the lignin distribution in the view of molecular and ultrastructure, and promote the development of a cost-efficient pretreatment strategy for biomass processing., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Extracts from the wood of Juniperus excelsa ssp. polycarpos were analysed for their antioxidant activity using the DPPH method and compared with ascorbic acid and butylated hydroxytoluene. The most active extracts were analysed for their chemical composition using gas chromatography-mass spectrometry. Acetone extract was found to be moderately active as an antioxidant agent at 58.38%, which was lower than the value of vitamin C (98.56%) at the concentration of 14.20 mg/mL. The major components identified in the acetone extract as trimethylsilyl (TMS) derivatives were pimaric acid TMS (24.56%), followed by α-d-glucopyranoside,1,3,4,6-tetrakis-O-(TMS)-β-d-fructofuranosyl 2,3,4,6-tetrakis-O-(TMS) (21.39%), triflouromethyl-bis-(TMS)methyl ketone (9.32%), and cedrol (0.72%). The dissolved water:methanol (1:1 v/v) partitioned from acetone extract afforded 12 fractions; among them, the F9 fraction was found to have good antioxidant activity (88.49%) at the concentration of 14.20 mg/mL. The major compounds identified in F9 fraction were α-d-glucopyranoside, 1,3,4,6-tetrakis-O-(TMS) (20.22%) and trifluoromethyl-bis-(TMS)methyl ketone (5.10%).

Cellulosic fiber introducing with photochromic properties can be used in many fields such as security packaging, printing paper, and rewritable paper. To introduce photochromic property to individual fiber, a polyelectrolyte composite layer composed of cationic chitosan (CS) and anionic carboxyl-containing spiropyran (SPCOOH) on pulp fibers was designed using layer-by-layer assembly technique. Scanning electron microscope observation showed that the SPCOOH was successfully absorbed onto the surface of fiber. The photochromic characteristic of LbL-treated fiber could be triggered by UV-vis absorption spectrum and the LbL-treated fibers had a good compatibility with pulp fibers. This study gives a highly effective method to impart the photochromic characteristic to paper., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The aim of this study was to investigate a combined process involving pulp fractionation and cellulase treatment of each fraction for improving the molecular weight distribution (MWD) and reactivity of a kraft-based dissolving pulp. Three pulp fractions, namely long-fiber, mid-fiber and short-fiber fractions (LF, MF and SF, respectively), were used as the substrates. The results showed that the SF had the highest accessibility, lowest viscosity, and highest cellulase adsorption capacity, while the opposite was true for the LF. At a given viscosity, the combined process led to a lower polydispersity index (3.71 vs 4.98) and a higher Fock reactivity (85.6% vs 76.3%), in comparison to the conventional single-stage cellulase treatment., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

In this work, TEMPO-oxidized cellulose nanofibers (TOCNs) were investigated as a green additive to the waterborne polyurethane (WPU) based coating, for improving its mechanical properties. The structure, morphology, mechanical properties and performances of the WPU/TOCNs coating were determined. Results showed that TOCNs had good compatibility to the WPU coating, and significantly enhanced the mechanical properties of the coating. The Halpin-Tsai and Ouali models were used to fit for the Young's modulus of the resulting coating, and good agreements were found between the Ouali model and experimental results when the TOCNs content exceeded the critical percolation threshold (0.7vol% or 1.0wt%). It was also found that the pencil hardness of the coating was improved with the addition of TOCNs. However, AFM and pull-off test revealed the negative effects of the TOCNs addition on the surface roughness and adhesion strength of the coating to the wood surface., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Two pretreatment methods to overcome recalcitrance of lignocelluloses, sulfite pretreatment (SPORL) and dilute acid (DA), were conducted to pretreat softwood masson pine and hardwood eucalyptus for enzymatic hydrolysis. In the presence of corresponding pre-hydrolysates, adding moderate cetyltrimethylammonium bromide (CTAB) could enhance the enzymatic hydrolysis of the SPORL-pretreated substrates, but had no enhancement for the DA-pretreated substrates. The results showed that sodium lignosulfonate (SL) in pre-hydrolysates and CTAB together had a strong enhancement on the enzymatic hydrolysis of lignocelluloses. The compound of commercial lignosulfonate SXSL and CTAB (SXSL-CTAB) could enhance the substrate enzymatic digestibility (SED) of SPORL-pretreated masson pine from 27.1% to 71.0%, and that of DA-pretreated eucalyptus from 37.6% to 67.9%. The mechanism that CTAB increased the adsorption of SL on lignin to form more effective steric hindrance and reduced the non-productive adsorption of cellulase on lignin by neutralizing the negative charge of SL was proposed., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Autohydrolysis with different severity factors was performed on poplar wood chips prior to pulping, and the wettability, absorbility and the following impregnation of NaOH solution for the poplar wood chips were then investigated. The results showed that after autohydrolysis pretreatment the porosity, shrinkage and fiber saturation point (FSP) of the poplar wood chips were increased, while the surface contact angle decreased as the severity factor was increased. The autohydrolyzed chips absorbed more NaOH in impregnation that resulted in a low NaOH concentration in the bulk impregnation liquor (i.e., the impregnation liquor outside wood chips), while the concentration in the entrapped liquor (i.e., the impregnation liquor inside wood chips) was increased. Autohydrolysis substantially improved the effectiveness of alkali impregnation., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Nanoparticles, as one of the key materials in nanotechnology and nanomedicine, have gained significant importance during the past decade. While metal-based nanoparticles are associated with synthetic and environmental hassles, cellulose introduces a green, sustainable alternative for nanoparticle synthesis. Here, we present the chemical synthesis and separation procedures to produce new classes of hairy nanoparticles (bearing both amorphous and crystalline regions) and biopolymers based on wood fibers. Through periodate oxidation of soft wood pulp, the glucose ring of cellulose is opened at the C2-C3 bond to form 2,3-dialdehyde groups. Further heating of the partially oxidized fibers (e.g., T = 80 °C) results in three products, namely fibrous oxidized cellulose, sterically stabilized nanocrystalline cellulose (SNCC), and dissolved dialdehyde modified cellulose (DAMC), which are well separated by intermittent centrifugation and co-solvent addition. The partially oxidized fibers (without heating) were used as a highly reactive intermediate to react with chlorite for converting almost all aldehyde to carboxyl groups. Co-solvent precipitation and centrifugation resulted in electrosterically stabilized nanocrystalline cellulose (ENCC) and dicarboxylated cellulose (DCC). The aldehyde content of SNCC and consequently surface charge of ENCC (carboxyl content) were precisely controlled by controlling the periodate oxidation reaction time, resulting in highly stable nanoparticles bearing more than 7 mmol functional groups per gram of nanoparticles (e.g., as compared to conventional NCC bearing << 1 mmol functional group/g). Atomic force microscopy (AFM), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) attested to the rod-like morphology. Conductometric titration, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), dynamic light scattering (DLS), electrokinetic-sonic-amplitude (ESA) and acoustic attenuation spectroscopy shed light on the superior properties of these nanomaterials.

Cost-effectiveness is vital for enzymatic treatment of dissolving pulp towards industrial application. The strategy of cellulase recycling with fresh cellulase addition was demonstrated in this work to activate the dissolving pulp, i.e. decreasing viscosity and increasing Fock reactivity. Results showed that 48.8-35.1% of cellulase activity can be recovered from the filtered liquor in five recycle rounds, which can be reused for enzymatic treatment of dissolving pulp. As a result, the recycling cellulase with addition fresh cellulase of 1mg/g led to the pulp of viscosity 470mL/g and Fock reactivity 80%, which is comparable with cellulase charge of 2mg/g. Other pulp properties such as alpha-cellulose, alkaline solubility and molecular weight distribution were also determined. Additionally, a zero-release of recycling cellulase treatment was proposed to integrate into the dissolving pulp production process., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Lignins are complex and heterogeneous natural polymers in which the major units are characterized by certain prominent interunit linkages. Previous attempts to identify and quantify 4-O-5-linked units in softwood lignins by NMR were not successful. In this work, various lignin model compounds, including the tetramers formed by the 4-O-5-coupling of β-O-4-, β-β-, and β-5-model dimers, were synthesized. Such compounds are better able to model the corresponding structures in lignins than those used previously. 4-O-5-Linked structures could be clearly observed and identified in real softwood lignin samples by comparison of their 2D HSQC NMR spectra with those from the model compounds. When comparing NMR data of phenol-acetylated versus phenol-etherified model compounds with those of acetylated lignins, it was apparent that most of the 4-O-5-linked structures in softwood lignins are present as free-phenolic end units.

The hardwood bleached kraft pulp (HBKP) fibers were pretreated by PFI mill to obtain the substrates, the effects of fibrillation on HBKP fibers' enzymatic hydrolysis was studied. The results showed that the enzymatic hydrolysis efficiency was enhanced obviously by mechanical refining. The mechanical refining alterated the fibers' characteristics such as fibrillation degree, specific surface area, swelling ability, crystallinity, fiber length and fines content. All these factors correlating to the enzymatic hydrolysis were evaluated through mathematical analysis. Among these factors, the fibrillation degree has the profoundest impact on the enzymatic hydrolysis of wood fibers. Consequently, the mechanical refining aiming for a high fibrillation degree was feasible to enhance the enzymatic hydrolysis of lignocellulosic biomass., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A combined process of lime treatment and mixed bed ion exchange was proposed to separate hemicellulose-derived saccharides (HDS) from prehydrolysis liquor (PHL) of lignocellulose as value added products. The optimization of lime treatment achieved up to 44.2% removal of non-saccharide organic compounds (NSOC), mainly colloidal substances, with negligible HDS degradation at 0.5% lime level and subsequent neutralization by phosphoric acid. The residual NSOC and calcium ions in lime-treated PHL were eliminated by mixed bed ion exchange. The breakthrough curves of HDS and NSOC showed selective retention toward NSOC, leading to 75% HDS recovery with 95% purity at 17 bed volumes of exchange capacity. In addition, macroporous resin showed higher exchange capacity than gel resin as indicated by the triple processing volume. The remarkable selectivity of the combined process suggested the feasibility for HDS separation from PHL., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A modified process consisting of an initial mechanical refining (R) followed by a low-alkali (5.5% NaOH) cold caustic extraction (CCE) and finally an endoglucanase (EG) treatment (R-5.5%CCE-EG) was investigated for upgrading paper-grade pulp to dissolving pulp. Results showed that compared to the conventional process (9%CCE-EG), the modified process can decrease the alkali concentration (from 9% to 5.5%) to achieve a similar hemicelluloses removal while simultaneously enhancing the Fock reactivity (from 62.2% to 81.0%). The improved results were due to the fact that the mechanical refining resulted in favorable fiber morphological changes, including increased pore volume/size, water retention value and specific surface area. Consequently, the hemicelluloses removal was enhanced even under the subsequent low-alkali CCE condition. A synergic effect of refining, low alkali concentration and enzymatic activation was responsible for the higher reactivity of resulting dissolving pulp., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

New endophytic fungi are assessed for the first time as pretreatment to enhance saccharification of Eucalyptus globulus wood. The fungi are all laccase-producing ascomycetes and were isolated from eucalyptus trees in Spain. After five endophytes had been assayed alone or in combination with white-rot fungus Trametes sp. I-62, three were pre-selected. To improve sugar production, an autohydrolysis pretreatment was performed before or after fungal treatment. Pretreatment increased sugar production 2.7 times compared to non-pretreated wood. When fungal and autohydrolysis pretreatments were combined, a synergistic increase in saccharification was observed in all cases. Endophytic fungi Ulocladium sp. and Hormonema sp. produced greater enhancements in saccharification than Trametes sp. I-62 (increase in sugar yields of 8.5, 8.0 and 6.0 times, respectively), demonstrating the high potential of these new endophytic fungi for saccharification enhancement., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Prehydrolysis of wood biomass prior to kraft cooking provides a stream containing hemicellulose-derived saccharides (HDSs) but also undesired non-saccharide compounds (NSCs) that were resulted from lignin depolymerization and carbohydrate degradation. In this study, a combined process consisting of lime treatment, resin adsorption, and gel filtration was developed to separate HDSs from NSCs. The macro-lignin impurities that accounted for 32.2% of NSCs were removed by lime treatment at 1.2% dosage with negligible HDSs loss. The majority of NSCs, lignin-derived phenolics, were eliminated by mixed bed ion exchange resin, elevating NSCs removal to 94.0%. The remaining NSCs, furfural and hydroxymethylfurfural, were excluded from HDSs by gel filtration. Chemical composition analysis showed that xylooligosaccharides (XOS) with the degree of depolymerization from 2 to 6 accounted for 28% of the total purified HDSs., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Hemicelluloses removal is a prerequisite for the production of high-quality cellulose (also known as dissolving pulp), and further recovery and utilization of hemicelluloses, which can be considered as a typical Integrated Forest Biorefinery concept. In this paper, a process of combined mechanical refining and cold caustic extraction (CCE), which was applied to a softwood sulfite sample, was investigated. The results showed that the hemicelluloses removal efficiency and selectivity were higher for the combined treatment than that for the CCE alone. The combined treatment can thus decrease the alkali concentration (from 8% to 4%) to achieve a similar hemicelluloses removal. The improved results were due to the fact that the mechanical refining resulted in increases in pore volume and diameter, water retention value (WRV) and specific surface area (SSA), all of which can make positive contributions to the hemicelluloses removal in the subsequent CCE process., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Hemicelluloses removal is highly desirable in many biomass processes, including the pretreatment steps of the bioconversion for ethanol production, production of high-quality dissolving pulps. In this study, a sequential treatment consisting of pulp fractionation, followed by caustic treatment to remove hemicelluloses from a softwood sulfite pulp, was investigated. The long-fiber fraction obtained after pulp fractionation, had a lower hemicelluloses content and smaller specific surface area, but larger pore diameter than the short-fiber fraction. The fiber fractions were subsequently treated in a cold caustic extraction (CCE) or hot caustic extraction (HCE). Results showed that hemicelluloses removal in the long-fiber fraction was more pronounced than the short-fiber fraction in both CCE and HCE processes. Other parameters, such as hemicelluloses removal selectivity, yield were studied. The underlying explanations were given., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Saccharides and lignin components in prehydrolysis liquor (PHL) from kraft-based dissolving pulp production was characterized after being fractionated using membrane filtration. The results showed that the membrane filtration provided a method for organics fractionation with considerable recovery rate, but exhibited some disadvantages. Besides the limited ability in purifying oligosaccharides (OS) due to the overlaps of molecular weight distribution with lignin components, the membrane filtration could not improve the homogeneity of OS as indicated by the analysis of chemical compositions and the degree of polymerization (DP), which may be ascribed to the linear conformation of OS. The characterization of lignin components indicated a great potential for polymer industry because of the remarkable content of phenolic hydroxyl groups (PhOH), especially for low molecular weight (LMW) fraction. It was concluded the organics in PHL provided streams of value-added chemicals. However, the practical significance thereof can be realized and maximized only when they are successfully and completely fractionated., (Copyright © 2015 Elsevier Ltd. All rights reserved.)