Search

This study deals with a new approach to tackle the challenges encountered in the filters-based reactive power calculation techniques utilized in the control system of static VAr compensators. In this approach, step and time-varying responses are improved by a combination of differential and filter-based methods. Then, optimum values of the main parameters of the low-pass and band-stop filters are determined considering three criteria: accuracy, speed, and capability for following the time-varying loads. To assess the performance of the proposed method, a new objective function is introduced, calculated for two sets of signals, captured from a real field in Mobarakeh Steel Company in Isfahan/Iran. Then, the proposed and the other reactive power calculation methods are assessed in practice and simulation. Also, the algorithm is implemented using a TMDSCNCD28335 as the processor to assess the real-time feasibility of the method. To do so, the reactive power variation of an electrical arc furnace is emulated in a prototype test bench and the algorithm is run in real-time by the processor during the system operation. [ABSTRACT FROM AUTHOR]

Fast reactive power variation in wind farms creates flicker. Static VAR compensators (SVCs) are the most commonly used devices for flicker mitigation. The reactive power calculation unit is the main component in the control system of SVCs. This article deals with two new approaches for reactive power calculation. In both methods, the main parameters of a filter-based technique are optimized using a novel optimization approach. The first method has a non monotonic step response which is converted to a desirable monotonic response by the second method. This results in a better response to a time-varying reactive power. The problem formulation and definition of a new objective function are presented. A data pool is gathered from Manjil wind farm, Iran, for different conditions. This data pool is used in the objective function to derive the optimal setting. The performance of the proposed methods is assessed using this dataset and is compared with other techniques. Also, real-time implementation of the algorithm is evaluated using TMDSCNCD28335 as the processor. To do so, the reactive power variation in a wind generation unit is emulated in a prototype test bench and the algorithm is run in real-time by the processor during the system operation. [ABSTRACT FROM AUTHOR]

One of the prominent problems in wind farms is voltage flicker emission. To prevent flicker emission or mitigate the impact as best as possible, a static VAr compensator (SVC) is a great candidate both economically and technically. However, SVCs cannot completely compensate the fast-changing reactive power due to delays caused by the reactive power calculation unit and the triggering fire angle of the SVC. This paper proposes a predictive control system for SVCs, by merging an additional predictive control block into the conventional control system. It is constructed based on deep neural networks, namely adaptive one-dimensional convolutional neural network (1D-CNN). The training process is conducted based on the adaptive learning weights process to enhance the prediction accuracy and training computational complexity of the 1D-CNN. Numerical results on the actual dataset in a wind farm in Manjil, Iran, have verified the forecasting accuracy and flicker mitigation of the proposed controller. [ABSTRACT FROM AUTHOR]

• Yet there are few studies for the extremely short-term forecasting of wind power. • Since the proposed approach is nonlinear, it provides more accurate modelling than the ARMA approach. • The proposed approach only uses the EKF algorithm to update the parameters which makes it suitable for online implantation. • It is robust against noisy easements and probabilistic behavior of the wind speed profile. • A proper model for the wind farm to simulate and evaluate the performance of the SVC based on real data is proposed. The inherent time-varying nature of the wind farm power causes undesired voltage flicker in the power network. In order to mitigate the flicker to enhance the performance of the wind power system with very fast dynamics, the static VAr compensator (SVC) is utilized. However, the SVC operates with some delays which negatively affects its performance. This persuades us to predict the reactive power of the wind farm to compensate for the real-world delay. The predicted reactive power is then utilized in the SVC. Therefore, this paper develops a novel fuzzy one-step-ahead prediction approach for the wind farm reactive power. The proposed fuzzy prediction uses a Takagi-Sugeno (TS) fuzzy representation whose unknown parameters are tuned online based on an extended Kalman filter (EKF). The wind farm is modeled as a time-varying current source which its amplitude and phase change every 0.01 s. A large set of the actual data of a wind farm in Manjil, Iran is gathered and directly utilized in the simulation process. Several flicker indices are calculated to evaluate the proposed prediction method. The obtained results show the performance enhancement and flicker mitigation of the suggested power scheme. [ABSTRACT FROM AUTHOR]